drivers/video/aty/xlinit.c - kernel/msm-4.9 - Gitiles

 /*
  *  ATI Rage XL Initialization. Support for Xpert98 and Victoria
  *  PCI cards.
  *
  *  Copyright (C) 2002 MontaVista Software Inc.
  *  Author: MontaVista Software, Inc.
  *         	stevel@mvista.com or source@mvista.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  *
  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *  You should have received a copy of the  GNU General Public License along
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 #include <video/mach64.h>
 #include "atyfb.h"

 #define MPLL_GAIN       0xad
 #define VPLL_GAIN       0xd5

 enum {
 	VICTORIA = 0,
 	XPERT98,
 	NUM_XL_CARDS
 };

 extern const struct aty_pll_ops aty_pll_ct;

 #define DEFAULT_CARD XPERT98
 static int xl_card = DEFAULT_CARD;

 static const struct xl_card_cfg_t {
 	int ref_crystal; // 10^4 Hz
 	int mem_type;
 	int mem_size;
 	u32 mem_cntl;
 	u32 ext_mem_cntl;
 	u32 mem_addr_config;
 	u32 bus_cntl;
 	u32 dac_cntl;
 	u32 hw_debug;
 	u32 custom_macro_cntl;
 	u8  dll2_cntl;
 	u8  pll_yclk_cntl;
 } card_cfg[NUM_XL_CARDS] = {
 	// VICTORIA
 	{	2700, SDRAM, 0x800000,
 		0x10757A3B, 0x64000C81, 0x00110202, 0x7b33A040,
 		0x82010102, 0x48803800, 0x005E0179,
 		0x50, 0x25
 	},
 	// XPERT98
 	{	1432,  WRAM, 0x800000,
 		0x00165A2B, 0xE0000CF1, 0x00200213, 0x7333A001,
 		0x8000000A, 0x48833800, 0x007F0779,
 		0x10, 0x19
 	}
 };

 typedef struct {
 	u8 lcd_reg;
 	u32 val;
 } lcd_tbl_t;

 static const lcd_tbl_t lcd_tbl[] = {
 	{ 0x01,	0x000520C0 },
 	{ 0x08,	0x02000408 },
 	{ 0x03,	0x00000F00 },
 	{ 0x00,	0x00000000 },
 	{ 0x02,	0x00000000 },
 	{ 0x04,	0x00000000 },
 	{ 0x05,	0x00000000 },
 	{ 0x06,	0x00000000 },
 	{ 0x33,	0x00000000 },
 	{ 0x34,	0x00000000 },
 	{ 0x35,	0x00000000 },
 	{ 0x36,	0x00000000 },
 	{ 0x37,	0x00000000 }
 };

 static void reset_gui(struct atyfb_par *par)
 {
 	aty_st_8(GEN_TEST_CNTL+1, 0x01, par);
 	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
 	aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
 	mdelay(5);
 }

 static void reset_sdram(struct atyfb_par *par)
 {
 	u8 temp;

 	temp = aty_ld_8(EXT_MEM_CNTL, par);
 	temp |= 0x02;
 	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_RESET = 1b
 	temp |= 0x08;
 	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST    = 10b
 	temp |= 0x0c;
 	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST    = 11b
 	mdelay(5);
 	temp &= 0xf3;
 	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST    = 00b
 	temp &= 0xfd;
 	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_REST  = 0b
 	mdelay(5);
 }

 static void init_dll(struct atyfb_par *par)
 {
 	// enable DLL
 	aty_st_pll_ct(PLL_GEN_CNTL,
 		   aty_ld_pll_ct(PLL_GEN_CNTL, par) & 0x7f,
 		   par);

 	// reset DLL
 	aty_st_pll_ct(DLL_CNTL, 0x82, par);
 	aty_st_pll_ct(DLL_CNTL, 0xE2, par);
 	mdelay(5);
 	aty_st_pll_ct(DLL_CNTL, 0x82, par);
 	mdelay(6);
 }

 static void reset_clocks(struct atyfb_par *par, struct pll_ct *pll,
 			 int hsync_enb)
 {
 	reset_gui(par);
 	aty_st_pll_ct(MCLK_FB_DIV, pll->mclk_fb_div, par);
 	aty_st_pll_ct(SCLK_FB_DIV, pll->sclk_fb_div, par);

 	mdelay(15);
 	init_dll(par);
 	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
 	mdelay(5);
 	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
 	mdelay(6);
 	reset_sdram(par);
 	aty_st_8(CRTC_GEN_CNTL+3,
 		 hsync_enb ? 0x00 : 0x04, par);

 	aty_st_pll_ct(SPLL_CNTL2, pll->spll_cntl2, par);
 	aty_st_pll_ct(PLL_GEN_CNTL, pll->pll_gen_cntl, par);
 	aty_st_pll_ct(PLL_VCLK_CNTL, pll->pll_vclk_cntl, par);
 }

 int atyfb_xl_init(struct fb_info *info)
 {
 	const struct xl_card_cfg_t * card = &card_cfg[xl_card];
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 	union aty_pll pll;
 	int err;
 	u32 temp;

 	aty_st_8(CONFIG_STAT0, 0x85, par);
 	mdelay(10);

 	/*
 	 * The following needs to be set before the call
 	 * to var_to_pll() below. They'll be re-set again
 	 * to the same values in aty_init().
 	 */
 	par->ref_clk_per = 100000000UL/card->ref_crystal;
 	par->ram_type = card->mem_type;
 	info->fix.smem_len = card->mem_size;
 	if (xl_card == VICTORIA) {
 		// the MCLK, XCLK are 120MHz on victoria card
 		par->mclk_per = 1000000/120;
 		par->xclk_per = 1000000/120;
 		par->features &= ~M64F_MFB_FORCE_4;
 	}

 	/*
 	 * Calculate mclk and xclk dividers, etc. The passed
 	 * pixclock and bpp values don't matter yet, the vclk
 	 * isn't programmed until later.
 	 */
 	if ((err = aty_pll_ct.var_to_pll(info, 39726, 8, &pll)))
 		return err;

 	aty_st_pll_ct(LVDS_CNTL0, 0x00, par);
 	aty_st_pll_ct(DLL2_CNTL, card->dll2_cntl, par);
 	aty_st_pll_ct(V2PLL_CNTL, 0x10, par);
 	aty_st_pll_ct(MPLL_CNTL, MPLL_GAIN, par);
 	aty_st_pll_ct(VPLL_CNTL, VPLL_GAIN, par);
 	aty_st_pll_ct(PLL_VCLK_CNTL, 0x00, par);
 	aty_st_pll_ct(VFC_CNTL, 0x1B, par);
 	aty_st_pll_ct(PLL_REF_DIV, pll.ct.pll_ref_div, par);
 	aty_st_pll_ct(PLL_EXT_CNTL, pll.ct.pll_ext_cntl, par);
 	aty_st_pll_ct(SPLL_CNTL2, 0x03, par);
 	aty_st_pll_ct(PLL_GEN_CNTL, 0x44, par);

 	reset_clocks(par, &pll.ct, 0);
 	mdelay(10);

 	aty_st_pll_ct(VCLK_POST_DIV, 0x03, par);
 	aty_st_pll_ct(VCLK0_FB_DIV, 0xDA, par);
 	aty_st_pll_ct(VCLK_POST_DIV, 0x0F, par);
 	aty_st_pll_ct(VCLK1_FB_DIV, 0xF5, par);
 	aty_st_pll_ct(VCLK_POST_DIV, 0x3F, par);
 	aty_st_pll_ct(PLL_EXT_CNTL, 0x40 | pll.ct.pll_ext_cntl, par);
 	aty_st_pll_ct(VCLK2_FB_DIV, 0x00, par);
 	aty_st_pll_ct(VCLK_POST_DIV, 0xFF, par);
 	aty_st_pll_ct(PLL_EXT_CNTL, 0xC0 | pll.ct.pll_ext_cntl, par);
 	aty_st_pll_ct(VCLK3_FB_DIV, 0x00, par);

 	aty_st_8(BUS_CNTL, 0x01, par);
 	aty_st_le32(BUS_CNTL, card->bus_cntl | 0x08000000, par);

 	aty_st_le32(CRTC_GEN_CNTL, 0x04000200, par);
 	aty_st_le16(CONFIG_STAT0, 0x0020, par);
 	aty_st_le32(MEM_CNTL, 0x10151A33, par);
 	aty_st_le32(EXT_MEM_CNTL, 0xE0000C01, par);
 	aty_st_le16(CRTC_GEN_CNTL+2, 0x0000, par);
 	aty_st_le32(DAC_CNTL, card->dac_cntl, par);
 	aty_st_le16(GEN_TEST_CNTL, 0x0100, par);
 	aty_st_le32(CUSTOM_MACRO_CNTL, 0x003C0171, par);
 	aty_st_le32(MEM_BUF_CNTL, 0x00382848, par);

 	aty_st_le32(HW_DEBUG, card->hw_debug, par);
 	aty_st_le16(MEM_ADDR_CONFIG, 0x0000, par);
 	aty_st_le16(GP_IO+2, 0x0000, par);
 	aty_st_le16(GEN_TEST_CNTL, 0x0000, par);
 	aty_st_le16(EXT_DAC_REGS+2, 0x0000, par);
 	aty_st_le32(CRTC_INT_CNTL, 0x00000000, par);
 	aty_st_le32(TIMER_CONFIG, 0x00000000, par);
 	aty_st_le32(0xEC, 0x00000000, par);
 	aty_st_le32(0xFC, 0x00000000, par);

 #if defined (CONFIG_FB_ATY_GENERIC_LCD)
 	{
 		int i;

 		for (i = 0; i < ARRAY_SIZE(lcd_tbl); i++)
 			aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
 	}
 #endif

 	aty_st_le16(CONFIG_STAT0, 0x00A4, par);
 	mdelay(10);

 	aty_st_8(BUS_CNTL+1, 0xA0, par);
 	mdelay(10);

 	reset_clocks(par, &pll.ct, 1);
 	mdelay(10);

 	// something about power management
 	aty_st_8(LCD_INDEX, 0x08, par);
 	aty_st_8(LCD_DATA, 0x0A, par);
 	aty_st_8(LCD_INDEX, 0x08, par);
 	aty_st_8(LCD_DATA+3, 0x02, par);
 	aty_st_8(LCD_INDEX, 0x08, par);
 	aty_st_8(LCD_DATA, 0x0B, par);
 	mdelay(2);

 	// enable display requests, enable CRTC
 	aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);
 	// disable display
 	aty_st_8(CRTC_GEN_CNTL, 0x40, par);
 	// disable display requests, disable CRTC
 	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
 	mdelay(10);

 	aty_st_pll_ct(PLL_YCLK_CNTL, 0x25, par);

 	aty_st_le16(CUSTOM_MACRO_CNTL, 0x0179, par);
 	aty_st_le16(CUSTOM_MACRO_CNTL+2, 0x005E, par);
 	aty_st_le16(CUSTOM_MACRO_CNTL+2, card->custom_macro_cntl>>16, par);
 	aty_st_8(CUSTOM_MACRO_CNTL+1,
 		 (card->custom_macro_cntl>>8) & 0xff, par);

 	aty_st_le32(MEM_ADDR_CONFIG, card->mem_addr_config, par);
 	aty_st_le32(MEM_CNTL, card->mem_cntl, par);
 	aty_st_le32(EXT_MEM_CNTL, card->ext_mem_cntl, par);

 	aty_st_8(CONFIG_STAT0, 0xA0 | card->mem_type, par);

 	aty_st_pll_ct(PLL_YCLK_CNTL, 0x01, par);
 	mdelay(15);
 	aty_st_pll_ct(PLL_YCLK_CNTL, card->pll_yclk_cntl, par);
 	mdelay(1);

 	reset_clocks(par, &pll.ct, 0);
 	mdelay(50);
 	reset_clocks(par, &pll.ct, 0);
 	mdelay(50);

 	// enable extended register block
 	aty_st_8(BUS_CNTL+3, 0x7B, par);
 	mdelay(1);
 	// disable extended register block
 	aty_st_8(BUS_CNTL+3, 0x73, par);

 	aty_st_8(CONFIG_STAT0, 0x80 | card->mem_type, par);

 	// disable display requests, disable CRTC
 	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
 	// disable mapping registers in VGA aperture
 	aty_st_8(CONFIG_CNTL, aty_ld_8(CONFIG_CNTL, par) & ~0x04, par);
 	mdelay(50);
 	// enable display requests, enable CRTC
 	aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);

 	// make GPIO's 14,15,16 all inputs
 	aty_st_8(LCD_INDEX, 0x07, par);
 	aty_st_8(LCD_DATA+3, 0x00, par);

 	// enable the display
 	aty_st_8(CRTC_GEN_CNTL, 0x00, par);
 	mdelay(17);
 	// reset the memory controller
 	aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
 	mdelay(15);
 	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
 	mdelay(30);

 	// enable extended register block
 	aty_st_8(BUS_CNTL+3,
 		 (u8)(aty_ld_8(BUS_CNTL+3, par) | 0x08),
 		 par);
 	// set FIFO size to 512 (PIO)
 	aty_st_le32(GUI_CNTL,
 		    aty_ld_le32(GUI_CNTL, par) & ~0x3,
 		    par);

 	// enable CRT and disable lcd
 	aty_st_8(LCD_INDEX, 0x01, par);
 	temp = aty_ld_le32(LCD_DATA, par);
 	temp = (temp | 0x01) & ~0x02;
 	aty_st_le32(LCD_DATA, temp, par);
 	return 0;
 }
	/*
	* ATI Rage XL Initialization. Support for Xpert98 and Victoria
	* PCI cards.
	*
	* Copyright (C) 2002 MontaVista Software Inc.
	* Author: MontaVista Software, Inc.
	* stevel@mvista.com or source@mvista.com
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
	* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*/
	#include <linux/config.h>
	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/errno.h>
	#include <linux/string.h>
	#include <linux/mm.h>
	#include <linux/slab.h>
	#include <linux/vmalloc.h>
	#include <linux/delay.h>
	#include <linux/fb.h>
	#include <linux/init.h>
	#include <linux/pci.h>
	#include <asm/io.h>
	#include <video/mach64.h>
	#include "atyfb.h"

	#define MPLL_GAIN 0xad
	#define VPLL_GAIN 0xd5

	enum {
	VICTORIA = 0,
	XPERT98,
	NUM_XL_CARDS
	};

	extern const struct aty_pll_ops aty_pll_ct;

	#define DEFAULT_CARD XPERT98
	static int xl_card = DEFAULT_CARD;

	static const struct xl_card_cfg_t {
	int ref_crystal; // 10^4 Hz
	int mem_type;
	int mem_size;
	u32 mem_cntl;
	u32 ext_mem_cntl;
	u32 mem_addr_config;
	u32 bus_cntl;
	u32 dac_cntl;
	u32 hw_debug;
	u32 custom_macro_cntl;
	u8 dll2_cntl;
	u8 pll_yclk_cntl;
	} card_cfg[NUM_XL_CARDS] = {
	// VICTORIA
	{ 2700, SDRAM, 0x800000,
	0x10757A3B, 0x64000C81, 0x00110202, 0x7b33A040,
	0x82010102, 0x48803800, 0x005E0179,
	0x50, 0x25
	},
	// XPERT98
	{ 1432, WRAM, 0x800000,
	0x00165A2B, 0xE0000CF1, 0x00200213, 0x7333A001,
	0x8000000A, 0x48833800, 0x007F0779,
	0x10, 0x19
	}
	};

	typedef struct {
	u8 lcd_reg;
	u32 val;
	} lcd_tbl_t;

	static const lcd_tbl_t lcd_tbl[] = {
	{ 0x01, 0x000520C0 },
	{ 0x08, 0x02000408 },
	{ 0x03, 0x00000F00 },
	{ 0x00, 0x00000000 },
	{ 0x02, 0x00000000 },
	{ 0x04, 0x00000000 },
	{ 0x05, 0x00000000 },
	{ 0x06, 0x00000000 },
	{ 0x33, 0x00000000 },
	{ 0x34, 0x00000000 },
	{ 0x35, 0x00000000 },
	{ 0x36, 0x00000000 },
	{ 0x37, 0x00000000 }
	};

	static void reset_gui(struct atyfb_par *par)
	{
	aty_st_8(GEN_TEST_CNTL+1, 0x01, par);
	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
	aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
	mdelay(5);
	}

	static void reset_sdram(struct atyfb_par *par)
	{
	u8 temp;

	temp = aty_ld_8(EXT_MEM_CNTL, par);
	temp \|= 0x02;
	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_RESET = 1b
	temp \|= 0x08;
	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST = 10b
	temp \|= 0x0c;
	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST = 11b
	mdelay(5);
	temp &= 0xf3;
	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST = 00b
	temp &= 0xfd;
	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_REST = 0b
	mdelay(5);
	}

	static void init_dll(struct atyfb_par *par)
	{
	// enable DLL
	aty_st_pll_ct(PLL_GEN_CNTL,
	aty_ld_pll_ct(PLL_GEN_CNTL, par) & 0x7f,
	par);

	// reset DLL
	aty_st_pll_ct(DLL_CNTL, 0x82, par);
	aty_st_pll_ct(DLL_CNTL, 0xE2, par);
	mdelay(5);
	aty_st_pll_ct(DLL_CNTL, 0x82, par);
	mdelay(6);
	}

	static void reset_clocks(struct atyfb_par par, struct pll_ct pll,
	int hsync_enb)
	{
	reset_gui(par);
	aty_st_pll_ct(MCLK_FB_DIV, pll->mclk_fb_div, par);
	aty_st_pll_ct(SCLK_FB_DIV, pll->sclk_fb_div, par);

	mdelay(15);
	init_dll(par);
	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
	mdelay(5);
	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
	mdelay(6);
	reset_sdram(par);
	aty_st_8(CRTC_GEN_CNTL+3,
	hsync_enb ? 0x00 : 0x04, par);

	aty_st_pll_ct(SPLL_CNTL2, pll->spll_cntl2, par);
	aty_st_pll_ct(PLL_GEN_CNTL, pll->pll_gen_cntl, par);
	aty_st_pll_ct(PLL_VCLK_CNTL, pll->pll_vclk_cntl, par);
	}

	int atyfb_xl_init(struct fb_info *info)
	{
	const struct xl_card_cfg_t * card = &card_cfg[xl_card];
	struct atyfb_par par = (struct atyfb_par ) info->par;
	union aty_pll pll;
	int err;
	u32 temp;

	aty_st_8(CONFIG_STAT0, 0x85, par);
	mdelay(10);

	/*
	* The following needs to be set before the call
	* to var_to_pll() below. They'll be re-set again
	* to the same values in aty_init().
	*/
	par->ref_clk_per = 100000000UL/card->ref_crystal;
	par->ram_type = card->mem_type;
	info->fix.smem_len = card->mem_size;
	if (xl_card == VICTORIA) {
	// the MCLK, XCLK are 120MHz on victoria card
	par->mclk_per = 1000000/120;
	par->xclk_per = 1000000/120;
	par->features &= ~M64F_MFB_FORCE_4;
	}

	/*
	* Calculate mclk and xclk dividers, etc. The passed
	* pixclock and bpp values don't matter yet, the vclk
	* isn't programmed until later.
	*/
	if ((err = aty_pll_ct.var_to_pll(info, 39726, 8, &pll)))
	return err;

	aty_st_pll_ct(LVDS_CNTL0, 0x00, par);
	aty_st_pll_ct(DLL2_CNTL, card->dll2_cntl, par);
	aty_st_pll_ct(V2PLL_CNTL, 0x10, par);
	aty_st_pll_ct(MPLL_CNTL, MPLL_GAIN, par);
	aty_st_pll_ct(VPLL_CNTL, VPLL_GAIN, par);
	aty_st_pll_ct(PLL_VCLK_CNTL, 0x00, par);
	aty_st_pll_ct(VFC_CNTL, 0x1B, par);
	aty_st_pll_ct(PLL_REF_DIV, pll.ct.pll_ref_div, par);
	aty_st_pll_ct(PLL_EXT_CNTL, pll.ct.pll_ext_cntl, par);
	aty_st_pll_ct(SPLL_CNTL2, 0x03, par);
	aty_st_pll_ct(PLL_GEN_CNTL, 0x44, par);

	reset_clocks(par, &pll.ct, 0);
	mdelay(10);

	aty_st_pll_ct(VCLK_POST_DIV, 0x03, par);
	aty_st_pll_ct(VCLK0_FB_DIV, 0xDA, par);
	aty_st_pll_ct(VCLK_POST_DIV, 0x0F, par);
	aty_st_pll_ct(VCLK1_FB_DIV, 0xF5, par);
	aty_st_pll_ct(VCLK_POST_DIV, 0x3F, par);
	aty_st_pll_ct(PLL_EXT_CNTL, 0x40 \| pll.ct.pll_ext_cntl, par);
	aty_st_pll_ct(VCLK2_FB_DIV, 0x00, par);
	aty_st_pll_ct(VCLK_POST_DIV, 0xFF, par);
	aty_st_pll_ct(PLL_EXT_CNTL, 0xC0 \| pll.ct.pll_ext_cntl, par);
	aty_st_pll_ct(VCLK3_FB_DIV, 0x00, par);

	aty_st_8(BUS_CNTL, 0x01, par);
	aty_st_le32(BUS_CNTL, card->bus_cntl \| 0x08000000, par);

	aty_st_le32(CRTC_GEN_CNTL, 0x04000200, par);
	aty_st_le16(CONFIG_STAT0, 0x0020, par);
	aty_st_le32(MEM_CNTL, 0x10151A33, par);
	aty_st_le32(EXT_MEM_CNTL, 0xE0000C01, par);
	aty_st_le16(CRTC_GEN_CNTL+2, 0x0000, par);
	aty_st_le32(DAC_CNTL, card->dac_cntl, par);
	aty_st_le16(GEN_TEST_CNTL, 0x0100, par);
	aty_st_le32(CUSTOM_MACRO_CNTL, 0x003C0171, par);
	aty_st_le32(MEM_BUF_CNTL, 0x00382848, par);

	aty_st_le32(HW_DEBUG, card->hw_debug, par);
	aty_st_le16(MEM_ADDR_CONFIG, 0x0000, par);
	aty_st_le16(GP_IO+2, 0x0000, par);
	aty_st_le16(GEN_TEST_CNTL, 0x0000, par);
	aty_st_le16(EXT_DAC_REGS+2, 0x0000, par);
	aty_st_le32(CRTC_INT_CNTL, 0x00000000, par);
	aty_st_le32(TIMER_CONFIG, 0x00000000, par);
	aty_st_le32(0xEC, 0x00000000, par);
	aty_st_le32(0xFC, 0x00000000, par);

	#if defined (CONFIG_FB_ATY_GENERIC_LCD)
	{
	int i;

	for (i = 0; i < ARRAY_SIZE(lcd_tbl); i++)
	aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
	}
	#endif

	aty_st_le16(CONFIG_STAT0, 0x00A4, par);
	mdelay(10);

	aty_st_8(BUS_CNTL+1, 0xA0, par);
	mdelay(10);

	reset_clocks(par, &pll.ct, 1);
	mdelay(10);

	// something about power management
	aty_st_8(LCD_INDEX, 0x08, par);
	aty_st_8(LCD_DATA, 0x0A, par);
	aty_st_8(LCD_INDEX, 0x08, par);
	aty_st_8(LCD_DATA+3, 0x02, par);
	aty_st_8(LCD_INDEX, 0x08, par);
	aty_st_8(LCD_DATA, 0x0B, par);
	mdelay(2);

	// enable display requests, enable CRTC
	aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);
	// disable display
	aty_st_8(CRTC_GEN_CNTL, 0x40, par);
	// disable display requests, disable CRTC
	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
	mdelay(10);

	aty_st_pll_ct(PLL_YCLK_CNTL, 0x25, par);

	aty_st_le16(CUSTOM_MACRO_CNTL, 0x0179, par);
	aty_st_le16(CUSTOM_MACRO_CNTL+2, 0x005E, par);
	aty_st_le16(CUSTOM_MACRO_CNTL+2, card->custom_macro_cntl>>16, par);
	aty_st_8(CUSTOM_MACRO_CNTL+1,
	(card->custom_macro_cntl>>8) & 0xff, par);

	aty_st_le32(MEM_ADDR_CONFIG, card->mem_addr_config, par);
	aty_st_le32(MEM_CNTL, card->mem_cntl, par);
	aty_st_le32(EXT_MEM_CNTL, card->ext_mem_cntl, par);

	aty_st_8(CONFIG_STAT0, 0xA0 \| card->mem_type, par);

	aty_st_pll_ct(PLL_YCLK_CNTL, 0x01, par);
	mdelay(15);
	aty_st_pll_ct(PLL_YCLK_CNTL, card->pll_yclk_cntl, par);
	mdelay(1);

	reset_clocks(par, &pll.ct, 0);
	mdelay(50);
	reset_clocks(par, &pll.ct, 0);
	mdelay(50);

	// enable extended register block
	aty_st_8(BUS_CNTL+3, 0x7B, par);
	mdelay(1);
	// disable extended register block
	aty_st_8(BUS_CNTL+3, 0x73, par);

	aty_st_8(CONFIG_STAT0, 0x80 \| card->mem_type, par);

	// disable display requests, disable CRTC
	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
	// disable mapping registers in VGA aperture
	aty_st_8(CONFIG_CNTL, aty_ld_8(CONFIG_CNTL, par) & ~0x04, par);
	mdelay(50);
	// enable display requests, enable CRTC
	aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);

	// make GPIO's 14,15,16 all inputs
	aty_st_8(LCD_INDEX, 0x07, par);
	aty_st_8(LCD_DATA+3, 0x00, par);

	// enable the display
	aty_st_8(CRTC_GEN_CNTL, 0x00, par);
	mdelay(17);
	// reset the memory controller
	aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
	mdelay(15);
	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
	mdelay(30);

	// enable extended register block
	aty_st_8(BUS_CNTL+3,
	(u8)(aty_ld_8(BUS_CNTL+3, par) \| 0x08),
	par);
	// set FIFO size to 512 (PIO)
	aty_st_le32(GUI_CNTL,
	aty_ld_le32(GUI_CNTL, par) & ~0x3,
	par);

	// enable CRT and disable lcd
	aty_st_8(LCD_INDEX, 0x01, par);
	temp = aty_ld_le32(LCD_DATA, par);
	temp = (temp \| 0x01) & ~0x02;
	aty_st_le32(LCD_DATA, temp, par);
	return 0;
	}