| /* |
| * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit) |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * Donggeun Kim <dg77.kim@samsung.com> |
| * Amit Daniel Kachhap <amit.kachhap@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "exynos_thermal_common.h" |
| #include "exynos_tmu.h" |
| #include "exynos_tmu_data.h" |
| |
| /** |
| * struct exynos_tmu_data : A structure to hold the private data of the TMU |
| driver |
| * @id: identifier of the one instance of the TMU controller. |
| * @pdata: pointer to the tmu platform/configuration data |
| * @base: base address of the single instance of the TMU controller. |
| * @base_common: base address of the common registers of the TMU controller. |
| * @irq: irq number of the TMU controller. |
| * @soc: id of the SOC type. |
| * @irq_work: pointer to the irq work structure. |
| * @lock: lock to implement synchronization. |
| * @clk: pointer to the clock structure. |
| * @temp_error1: fused value of the first point trim. |
| * @temp_error2: fused value of the second point trim. |
| * @regulator: pointer to the TMU regulator structure. |
| * @reg_conf: pointer to structure to register with core thermal. |
| */ |
| struct exynos_tmu_data { |
| int id; |
| struct exynos_tmu_platform_data *pdata; |
| void __iomem *base; |
| void __iomem *base_common; |
| int irq; |
| enum soc_type soc; |
| struct work_struct irq_work; |
| struct mutex lock; |
| struct clk *clk; |
| u8 temp_error1, temp_error2; |
| struct regulator *regulator; |
| struct thermal_sensor_conf *reg_conf; |
| }; |
| |
| /* |
| * TMU treats temperature as a mapped temperature code. |
| * The temperature is converted differently depending on the calibration type. |
| */ |
| static int temp_to_code(struct exynos_tmu_data *data, u8 temp) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| int temp_code; |
| |
| if (pdata->cal_mode == HW_MODE) |
| return temp; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) |
| /* temp should range between 25 and 125 */ |
| if (temp < 25 || temp > 125) { |
| temp_code = -EINVAL; |
| goto out; |
| } |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp_code = (temp - pdata->first_point_trim) * |
| (data->temp_error2 - data->temp_error1) / |
| (pdata->second_point_trim - pdata->first_point_trim) + |
| data->temp_error1; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp_code = temp + data->temp_error1 - pdata->first_point_trim; |
| break; |
| default: |
| temp_code = temp + pdata->default_temp_offset; |
| break; |
| } |
| out: |
| return temp_code; |
| } |
| |
| /* |
| * Calculate a temperature value from a temperature code. |
| * The unit of the temperature is degree Celsius. |
| */ |
| static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| int temp; |
| |
| if (pdata->cal_mode == HW_MODE) |
| return temp_code; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) |
| /* temp_code should range between 75 and 175 */ |
| if (temp_code < 75 || temp_code > 175) { |
| temp = -ENODATA; |
| goto out; |
| } |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp = (temp_code - data->temp_error1) * |
| (pdata->second_point_trim - pdata->first_point_trim) / |
| (data->temp_error2 - data->temp_error1) + |
| pdata->first_point_trim; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp = temp_code - data->temp_error1 + pdata->first_point_trim; |
| break; |
| default: |
| temp = temp_code - pdata->default_temp_offset; |
| break; |
| } |
| out: |
| return temp; |
| } |
| |
| static int exynos_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| const struct exynos_tmu_registers *reg = pdata->registers; |
| unsigned int status, trim_info = 0, con; |
| unsigned int rising_threshold = 0, falling_threshold = 0; |
| int ret = 0, threshold_code, i, trigger_levs = 0; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| if (TMU_SUPPORTS(pdata, READY_STATUS)) { |
| status = readb(data->base + reg->tmu_status); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| } |
| |
| if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) |
| __raw_writel(1, data->base + reg->triminfo_ctrl); |
| |
| if (pdata->cal_mode == HW_MODE) |
| goto skip_calib_data; |
| |
| /* Save trimming info in order to perform calibration */ |
| if (data->soc == SOC_ARCH_EXYNOS5440) { |
| /* |
| * For exynos5440 soc triminfo value is swapped between TMU0 and |
| * TMU2, so the below logic is needed. |
| */ |
| switch (data->id) { |
| case 0: |
| trim_info = readl(data->base + |
| EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); |
| break; |
| case 1: |
| trim_info = readl(data->base + reg->triminfo_data); |
| break; |
| case 2: |
| trim_info = readl(data->base - |
| EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); |
| } |
| } else { |
| trim_info = readl(data->base + reg->triminfo_data); |
| } |
| data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; |
| data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & |
| EXYNOS_TMU_TEMP_MASK); |
| |
| if (!data->temp_error1 || |
| (pdata->min_efuse_value > data->temp_error1) || |
| (data->temp_error1 > pdata->max_efuse_value)) |
| data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; |
| |
| if (!data->temp_error2) |
| data->temp_error2 = |
| (pdata->efuse_value >> reg->triminfo_85_shift) & |
| EXYNOS_TMU_TEMP_MASK; |
| |
| skip_calib_data: |
| if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) { |
| dev_err(&pdev->dev, "Invalid max trigger level\n"); |
| goto out; |
| } |
| |
| for (i = 0; i < pdata->max_trigger_level; i++) { |
| if (!pdata->trigger_levels[i]) |
| continue; |
| |
| if ((pdata->trigger_type[i] == HW_TRIP) && |
| (!pdata->trigger_levels[pdata->max_trigger_level - 1])) { |
| dev_err(&pdev->dev, "Invalid hw trigger level\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Count trigger levels except the HW trip*/ |
| if (!(pdata->trigger_type[i] == HW_TRIP)) |
| trigger_levs++; |
| } |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) { |
| /* Write temperature code for threshold */ |
| threshold_code = temp_to_code(data, pdata->threshold); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| writeb(threshold_code, |
| data->base + reg->threshold_temp); |
| for (i = 0; i < trigger_levs; i++) |
| writeb(pdata->trigger_levels[i], data->base + |
| reg->threshold_th0 + i * sizeof(reg->threshold_th0)); |
| |
| writel(reg->inten_rise_mask, data->base + reg->tmu_intclear); |
| } else { |
| /* Write temperature code for rising and falling threshold */ |
| for (i = 0; |
| i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) { |
| threshold_code = temp_to_code(data, |
| pdata->trigger_levels[i]); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| rising_threshold |= threshold_code << 8 * i; |
| if (pdata->threshold_falling) { |
| threshold_code = temp_to_code(data, |
| pdata->trigger_levels[i] - |
| pdata->threshold_falling); |
| if (threshold_code > 0) |
| falling_threshold |= |
| threshold_code << 8 * i; |
| } |
| } |
| |
| writel(rising_threshold, |
| data->base + reg->threshold_th0); |
| writel(falling_threshold, |
| data->base + reg->threshold_th1); |
| |
| writel((reg->inten_rise_mask << reg->inten_rise_shift) | |
| (reg->inten_fall_mask << reg->inten_fall_shift), |
| data->base + reg->tmu_intclear); |
| |
| /* if last threshold limit is also present */ |
| i = pdata->max_trigger_level - 1; |
| if (pdata->trigger_levels[i] && |
| (pdata->trigger_type[i] == HW_TRIP)) { |
| threshold_code = temp_to_code(data, |
| pdata->trigger_levels[i]); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { |
| /* 1-4 level to be assigned in th0 reg */ |
| rising_threshold |= threshold_code << 8 * i; |
| writel(rising_threshold, |
| data->base + reg->threshold_th0); |
| } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) { |
| /* 5th level to be assigned in th2 reg */ |
| rising_threshold = |
| threshold_code << reg->threshold_th3_l0_shift; |
| writel(rising_threshold, |
| data->base + reg->threshold_th2); |
| } |
| con = readl(data->base + reg->tmu_ctrl); |
| con |= (1 << reg->therm_trip_en_shift); |
| writel(con, data->base + reg->tmu_ctrl); |
| } |
| } |
| /*Clear the PMIN in the common TMU register*/ |
| if (reg->tmu_pmin && !data->id) |
| writel(0, data->base_common + reg->tmu_pmin); |
| out: |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static void exynos_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| const struct exynos_tmu_registers *reg = pdata->registers; |
| unsigned int con, interrupt_en, cal_val; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| con = readl(data->base + reg->tmu_ctrl); |
| |
| if (pdata->reference_voltage) { |
| con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); |
| con |= pdata->reference_voltage << reg->buf_vref_sel_shift; |
| } |
| |
| if (pdata->gain) { |
| con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift); |
| con |= (pdata->gain << reg->buf_slope_sel_shift); |
| } |
| |
| if (pdata->noise_cancel_mode) { |
| con &= ~(reg->therm_trip_mode_mask << |
| reg->therm_trip_mode_shift); |
| con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); |
| } |
| |
| if (pdata->cal_mode == HW_MODE) { |
| con &= ~(reg->calib_mode_mask << reg->calib_mode_shift); |
| cal_val = 0; |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| cal_val = 3; |
| break; |
| case TYPE_ONE_POINT_TRIMMING_85: |
| cal_val = 2; |
| break; |
| case TYPE_ONE_POINT_TRIMMING_25: |
| cal_val = 1; |
| break; |
| case TYPE_NONE: |
| break; |
| default: |
| dev_err(&pdev->dev, "Invalid calibration type, using none\n"); |
| } |
| con |= cal_val << reg->calib_mode_shift; |
| } |
| |
| if (on) { |
| con |= (1 << reg->core_en_shift); |
| interrupt_en = |
| pdata->trigger_enable[3] << reg->inten_rise3_shift | |
| pdata->trigger_enable[2] << reg->inten_rise2_shift | |
| pdata->trigger_enable[1] << reg->inten_rise1_shift | |
| pdata->trigger_enable[0] << reg->inten_rise0_shift; |
| if (TMU_SUPPORTS(pdata, FALLING_TRIP)) |
| interrupt_en |= |
| interrupt_en << reg->inten_fall0_shift; |
| } else { |
| con &= ~(1 << reg->core_en_shift); |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| writel(interrupt_en, data->base + reg->tmu_inten); |
| writel(con, data->base + reg->tmu_ctrl); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| } |
| |
| static int exynos_tmu_read(struct exynos_tmu_data *data) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| const struct exynos_tmu_registers *reg = pdata->registers; |
| u8 temp_code; |
| int temp; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| temp_code = readb(data->base + reg->tmu_cur_temp); |
| temp = code_to_temp(data, temp_code); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return temp; |
| } |
| |
| #ifdef CONFIG_THERMAL_EMULATION |
| static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) |
| { |
| struct exynos_tmu_data *data = drv_data; |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| const struct exynos_tmu_registers *reg = pdata->registers; |
| unsigned int val; |
| int ret = -EINVAL; |
| |
| if (!TMU_SUPPORTS(pdata, EMULATION)) |
| goto out; |
| |
| if (temp && temp < MCELSIUS) |
| goto out; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| val = readl(data->base + reg->emul_con); |
| |
| if (temp) { |
| temp /= MCELSIUS; |
| |
| if (TMU_SUPPORTS(pdata, EMUL_TIME)) { |
| val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift); |
| val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift); |
| } |
| val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift); |
| val |= (temp_to_code(data, temp) << reg->emul_temp_shift) | |
| EXYNOS_EMUL_ENABLE; |
| } else { |
| val &= ~EXYNOS_EMUL_ENABLE; |
| } |
| |
| writel(val, data->base + reg->emul_con); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| return 0; |
| out: |
| return ret; |
| } |
| #else |
| static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) |
| { return -EINVAL; } |
| #endif/*CONFIG_THERMAL_EMULATION*/ |
| |
| static void exynos_tmu_work(struct work_struct *work) |
| { |
| struct exynos_tmu_data *data = container_of(work, |
| struct exynos_tmu_data, irq_work); |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| const struct exynos_tmu_registers *reg = pdata->registers; |
| unsigned int val_irq, val_type; |
| |
| /* Find which sensor generated this interrupt */ |
| if (reg->tmu_irqstatus) { |
| val_type = readl(data->base_common + reg->tmu_irqstatus); |
| if (!((val_type >> data->id) & 0x1)) |
| goto out; |
| } |
| |
| exynos_report_trigger(data->reg_conf); |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| /* TODO: take action based on particular interrupt */ |
| val_irq = readl(data->base + reg->tmu_intstat); |
| /* clear the interrupts */ |
| writel(val_irq, data->base + reg->tmu_intclear); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| out: |
| enable_irq(data->irq); |
| } |
| |
| static irqreturn_t exynos_tmu_irq(int irq, void *id) |
| { |
| struct exynos_tmu_data *data = id; |
| |
| disable_irq_nosync(irq); |
| schedule_work(&data->irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct of_device_id exynos_tmu_match[] = { |
| { |
| .compatible = "samsung,exynos4210-tmu", |
| .data = (void *)EXYNOS4210_TMU_DRV_DATA, |
| }, |
| { |
| .compatible = "samsung,exynos4412-tmu", |
| .data = (void *)EXYNOS5250_TMU_DRV_DATA, |
| }, |
| { |
| .compatible = "samsung,exynos5250-tmu", |
| .data = (void *)EXYNOS5250_TMU_DRV_DATA, |
| }, |
| { |
| .compatible = "samsung,exynos5440-tmu", |
| .data = (void *)EXYNOS5440_TMU_DRV_DATA, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_tmu_match); |
| |
| static inline struct exynos_tmu_platform_data *exynos_get_driver_data( |
| struct platform_device *pdev, int id) |
| { |
| struct exynos_tmu_init_data *data_table; |
| struct exynos_tmu_platform_data *tmu_data; |
| const struct of_device_id *match; |
| |
| match = of_match_node(exynos_tmu_match, pdev->dev.of_node); |
| if (!match) |
| return NULL; |
| data_table = (struct exynos_tmu_init_data *) match->data; |
| if (!data_table || id >= data_table->tmu_count) |
| return NULL; |
| tmu_data = data_table->tmu_data; |
| return (struct exynos_tmu_platform_data *) (tmu_data + id); |
| } |
| |
| static int exynos_map_dt_data(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata; |
| struct resource res; |
| int ret; |
| |
| if (!data || !pdev->dev.of_node) |
| return -ENODEV; |
| |
| /* |
| * Try enabling the regulator if found |
| * TODO: Add regulator as an SOC feature, so that regulator enable |
| * is a compulsory call. |
| */ |
| data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); |
| if (!IS_ERR(data->regulator)) { |
| ret = regulator_enable(data->regulator); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to enable vtmu\n"); |
| return ret; |
| } |
| } else { |
| dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); |
| } |
| |
| data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); |
| if (data->id < 0) |
| data->id = 0; |
| |
| data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); |
| if (data->irq <= 0) { |
| dev_err(&pdev->dev, "failed to get IRQ\n"); |
| return -ENODEV; |
| } |
| |
| if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { |
| dev_err(&pdev->dev, "failed to get Resource 0\n"); |
| return -ENODEV; |
| } |
| |
| data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); |
| if (!data->base) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -EADDRNOTAVAIL; |
| } |
| |
| pdata = exynos_get_driver_data(pdev, data->id); |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform init data supplied.\n"); |
| return -ENODEV; |
| } |
| data->pdata = pdata; |
| /* |
| * Check if the TMU shares some registers and then try to map the |
| * memory of common registers. |
| */ |
| if (!TMU_SUPPORTS(pdata, SHARED_MEMORY)) |
| return 0; |
| |
| if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { |
| dev_err(&pdev->dev, "failed to get Resource 1\n"); |
| return -ENODEV; |
| } |
| |
| data->base_common = devm_ioremap(&pdev->dev, res.start, |
| resource_size(&res)); |
| if (!data->base_common) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int exynos_tmu_probe(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data; |
| struct exynos_tmu_platform_data *pdata; |
| struct thermal_sensor_conf *sensor_conf; |
| int ret, i; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), |
| GFP_KERNEL); |
| if (!data) { |
| dev_err(&pdev->dev, "Failed to allocate driver structure\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(pdev, data); |
| mutex_init(&data->lock); |
| |
| ret = exynos_map_dt_data(pdev); |
| if (ret) |
| return ret; |
| |
| pdata = data->pdata; |
| |
| INIT_WORK(&data->irq_work, exynos_tmu_work); |
| |
| data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); |
| if (IS_ERR(data->clk)) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| return PTR_ERR(data->clk); |
| } |
| |
| ret = clk_prepare(data->clk); |
| if (ret) |
| return ret; |
| |
| if (pdata->type == SOC_ARCH_EXYNOS || |
| pdata->type == SOC_ARCH_EXYNOS4210 || |
| pdata->type == SOC_ARCH_EXYNOS5440) |
| data->soc = pdata->type; |
| else { |
| ret = -EINVAL; |
| dev_err(&pdev->dev, "Platform not supported\n"); |
| goto err_clk; |
| } |
| |
| ret = exynos_tmu_initialize(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to initialize TMU\n"); |
| goto err_clk; |
| } |
| |
| exynos_tmu_control(pdev, true); |
| |
| /* Allocate a structure to register with the exynos core thermal */ |
| sensor_conf = devm_kzalloc(&pdev->dev, |
| sizeof(struct thermal_sensor_conf), GFP_KERNEL); |
| if (!sensor_conf) { |
| dev_err(&pdev->dev, "Failed to allocate registration struct\n"); |
| ret = -ENOMEM; |
| goto err_clk; |
| } |
| sprintf(sensor_conf->name, "therm_zone%d", data->id); |
| sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; |
| sensor_conf->write_emul_temp = |
| (int (*)(void *, unsigned long))exynos_tmu_set_emulation; |
| sensor_conf->driver_data = data; |
| sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] + |
| pdata->trigger_enable[1] + pdata->trigger_enable[2]+ |
| pdata->trigger_enable[3]; |
| |
| for (i = 0; i < sensor_conf->trip_data.trip_count; i++) { |
| sensor_conf->trip_data.trip_val[i] = |
| pdata->threshold + pdata->trigger_levels[i]; |
| sensor_conf->trip_data.trip_type[i] = |
| pdata->trigger_type[i]; |
| } |
| |
| sensor_conf->trip_data.trigger_falling = pdata->threshold_falling; |
| |
| sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count; |
| for (i = 0; i < pdata->freq_tab_count; i++) { |
| sensor_conf->cooling_data.freq_data[i].freq_clip_max = |
| pdata->freq_tab[i].freq_clip_max; |
| sensor_conf->cooling_data.freq_data[i].temp_level = |
| pdata->freq_tab[i].temp_level; |
| } |
| sensor_conf->dev = &pdev->dev; |
| /* Register the sensor with thermal management interface */ |
| ret = exynos_register_thermal(sensor_conf); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register thermal interface\n"); |
| goto err_clk; |
| } |
| data->reg_conf = sensor_conf; |
| |
| ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, |
| IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); |
| goto err_clk; |
| } |
| |
| return 0; |
| err_clk: |
| clk_unprepare(data->clk); |
| return ret; |
| } |
| |
| static int exynos_tmu_remove(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| |
| exynos_tmu_control(pdev, false); |
| |
| exynos_unregister_thermal(data->reg_conf); |
| |
| clk_unprepare(data->clk); |
| |
| if (!IS_ERR(data->regulator)) |
| regulator_disable(data->regulator); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int exynos_tmu_suspend(struct device *dev) |
| { |
| exynos_tmu_control(to_platform_device(dev), false); |
| |
| return 0; |
| } |
| |
| static int exynos_tmu_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| exynos_tmu_initialize(pdev); |
| exynos_tmu_control(pdev, true); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, |
| exynos_tmu_suspend, exynos_tmu_resume); |
| #define EXYNOS_TMU_PM (&exynos_tmu_pm) |
| #else |
| #define EXYNOS_TMU_PM NULL |
| #endif |
| |
| static struct platform_driver exynos_tmu_driver = { |
| .driver = { |
| .name = "exynos-tmu", |
| .owner = THIS_MODULE, |
| .pm = EXYNOS_TMU_PM, |
| .of_match_table = exynos_tmu_match, |
| }, |
| .probe = exynos_tmu_probe, |
| .remove = exynos_tmu_remove, |
| }; |
| |
| module_platform_driver(exynos_tmu_driver); |
| |
| MODULE_DESCRIPTION("EXYNOS TMU Driver"); |
| MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:exynos-tmu"); |