Documentation/binfmt_misc.txt - kernel/msm-4.9 - Gitiles

      Kernel Support for miscellaneous (your favourite) Binary Formats v1.1
      =====================================================================

 This Kernel feature allows you to invoke almost (for restrictions see below)
 every program by simply typing its name in the shell.
 This includes for example compiled Java(TM), Python or Emacs programs.

 To achieve this you must tell binfmt_misc which interpreter has to be invoked
 with which binary. Binfmt_misc recognises the binary-type by matching some bytes
 at the beginning of the file with a magic byte sequence (masking out specified
 bits) you have supplied. Binfmt_misc can also recognise a filename extension
 aka '.com' or '.exe'.

 First you must mount binfmt_misc:
 	mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc

 To actually register a new binary type, you have to set up a string looking like
 :name:type:offset:magic:mask:interpreter:flags (where you can choose the ':' upon
 your needs) and echo it to /proc/sys/fs/binfmt_misc/register.
 Here is what the fields mean:
  - 'name' is an identifier string. A new /proc file will be created with this
    name below /proc/sys/fs/binfmt_misc
  - 'type' is the type of recognition. Give 'M' for magic and 'E' for extension.
  - 'offset' is the offset of the magic/mask in the file, counted in bytes. This
    defaults to 0 if you omit it (i.e. you write ':name:type::magic...')
  - 'magic' is the byte sequence binfmt_misc is matching for. The magic string
    may contain hex-encoded characters like \x0a or \xA4. In a shell environment
    you will have to write \\x0a to prevent the shell from eating your \.
    If you chose filename extension matching, this is the extension to be
    recognised (without the '.', the \x0a specials are not allowed). Extension
    matching is case sensitive!
  - 'mask' is an (optional, defaults to all 0xff) mask. You can mask out some
    bits from matching by supplying a string like magic and as long as magic.
    The mask is anded with the byte sequence of the file.
  - 'interpreter' is the program that should be invoked with the binary as first
    argument (specify the full path)
  - 'flags' is an optional field that controls several aspects of the invocation
    of the interpreter. It is a string of capital letters, each controls a certain
    aspect. The following flags are supported -
       'P' - preserve-argv[0].  Legacy behavior of binfmt_misc is to overwrite the
             original argv[0] with the full path to the binary.  When this flag is
             included, binfmt_misc will add an argument to the argument vector for
             this purpose, thus preserving the original argv[0].
       'O' - open-binary. Legacy behavior of binfmt_misc is to pass the full path
             of the binary to the interpreter as an argument. When this flag is
             included, binfmt_misc will open the file for reading and pass its
             descriptor as an argument, instead of the full path, thus allowing
             the interpreter to execute non-readable binaries. This feature should
             be used with care - the interpreter has to be trusted not to emit
             the contents of the non-readable binary.
       'C' - credentials. Currently, the behavior of binfmt_misc is to calculate
             the credentials and security token of the new process according to
             the interpreter. When this flag is included, these attributes are
             calculated according to the binary. It also implies the 'O' flag.
             This feature should be used with care as the interpreter
             will run with root permissions when a setuid binary owned by root
             is run with binfmt_misc.


 There are some restrictions:
  - the whole register string may not exceed 255 characters
  - the magic must reside in the first 128 bytes of the file, i.e.
    offset+size(magic) has to be less than 128
  - the interpreter string may not exceed 127 characters

 To use binfmt_misc you have to mount it first. You can mount it with
 "mount -t binfmt_misc none /proc/sys/fs/binfmt_misc" command, or you can add
 a line "none  /proc/sys/fs/binfmt_misc binfmt_misc defaults 0 0" to your
 /etc/fstab so it auto mounts on boot.

 You may want to add the binary formats in one of your /etc/rc scripts during
 boot-up. Read the manual of your init program to figure out how to do this
 right.

 Think about the order of adding entries! Later added entries are matched first!


 A few examples (assumed you are in /proc/sys/fs/binfmt_misc):

 - enable support for em86 (like binfmt_em86, for Alpha AXP only):
   echo ':i386:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:' > register
   echo ':i486:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:' > register

 - enable support for packed DOS applications (pre-configured dosemu hdimages):
   echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register

 - enable support for Windows executables using wine:
   echo ':DOSWin:M::MZ::/usr/local/bin/wine:' > register

 For java support see Documentation/java.txt


 You can enable/disable binfmt_misc or one binary type by echoing 0 (to disable)
 or 1 (to enable) to /proc/sys/fs/binfmt_misc/status or /proc/.../the_name.
 Catting the file tells you the current status of binfmt_misc/the entry.

 You can remove one entry or all entries by echoing -1 to /proc/.../the_name
 or /proc/sys/fs/binfmt_misc/status.


 HINTS:
 ======

 If you want to pass special arguments to your interpreter, you can
 write a wrapper script for it. See Documentation/java.txt for an
 example.

 Your interpreter should NOT look in the PATH for the filename; the kernel
 passes it the full filename (or the file descriptor) to use.  Using $PATH can
 cause unexpected behaviour and can be a security hazard.


 There is a web page about binfmt_misc at
 http://www.tat.physik.uni-tuebingen.de

 Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
	Kernel Support for miscellaneous (your favourite) Binary Formats v1.1
	=====================================================================

	This Kernel feature allows you to invoke almost (for restrictions see below)
	every program by simply typing its name in the shell.
	This includes for example compiled Java(TM), Python or Emacs programs.

	To achieve this you must tell binfmt_misc which interpreter has to be invoked
	with which binary. Binfmt_misc recognises the binary-type by matching some bytes
	at the beginning of the file with a magic byte sequence (masking out specified
	bits) you have supplied. Binfmt_misc can also recognise a filename extension
	aka '.com' or '.exe'.

	First you must mount binfmt_misc:
	mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc

	To actually register a new binary type, you have to set up a string looking like
	:name:type:offset:magic:mask:interpreter:flags (where you can choose the ':' upon
	your needs) and echo it to /proc/sys/fs/binfmt_misc/register.
	Here is what the fields mean:
	- 'name' is an identifier string. A new /proc file will be created with this
	name below /proc/sys/fs/binfmt_misc
	- 'type' is the type of recognition. Give 'M' for magic and 'E' for extension.
	- 'offset' is the offset of the magic/mask in the file, counted in bytes. This
	defaults to 0 if you omit it (i.e. you write ':name:type::magic...')
	- 'magic' is the byte sequence binfmt_misc is matching for. The magic string
	may contain hex-encoded characters like \x0a or \xA4. In a shell environment
	you will have to write \\x0a to prevent the shell from eating your \.
	If you chose filename extension matching, this is the extension to be
	recognised (without the '.', the \x0a specials are not allowed). Extension
	matching is case sensitive!
	- 'mask' is an (optional, defaults to all 0xff) mask. You can mask out some
	bits from matching by supplying a string like magic and as long as magic.
	The mask is anded with the byte sequence of the file.
	- 'interpreter' is the program that should be invoked with the binary as first
	argument (specify the full path)
	- 'flags' is an optional field that controls several aspects of the invocation
	of the interpreter. It is a string of capital letters, each controls a certain
	aspect. The following flags are supported -
	'P' - preserve-argv[0]. Legacy behavior of binfmt_misc is to overwrite the
	original argv[0] with the full path to the binary. When this flag is
	included, binfmt_misc will add an argument to the argument vector for
	this purpose, thus preserving the original argv[0].
	'O' - open-binary. Legacy behavior of binfmt_misc is to pass the full path
	of the binary to the interpreter as an argument. When this flag is
	included, binfmt_misc will open the file for reading and pass its
	descriptor as an argument, instead of the full path, thus allowing
	the interpreter to execute non-readable binaries. This feature should
	be used with care - the interpreter has to be trusted not to emit
	the contents of the non-readable binary.
	'C' - credentials. Currently, the behavior of binfmt_misc is to calculate
	the credentials and security token of the new process according to
	the interpreter. When this flag is included, these attributes are
	calculated according to the binary. It also implies the 'O' flag.
	This feature should be used with care as the interpreter
	will run with root permissions when a setuid binary owned by root
	is run with binfmt_misc.


	There are some restrictions:
	- the whole register string may not exceed 255 characters
	- the magic must reside in the first 128 bytes of the file, i.e.
	offset+size(magic) has to be less than 128
	- the interpreter string may not exceed 127 characters

	To use binfmt_misc you have to mount it first. You can mount it with
	"mount -t binfmt_misc none /proc/sys/fs/binfmt_misc" command, or you can add
	a line "none /proc/sys/fs/binfmt_misc binfmt_misc defaults 0 0" to your
	/etc/fstab so it auto mounts on boot.

	You may want to add the binary formats in one of your /etc/rc scripts during
	boot-up. Read the manual of your init program to figure out how to do this
	right.

	Think about the order of adding entries! Later added entries are matched first!


	A few examples (assumed you are in /proc/sys/fs/binfmt_misc):

	- enable support for em86 (like binfmt_em86, for Alpha AXP only):
	echo ':i386:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:' > register
	echo ':i486:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:' > register

	- enable support for packed DOS applications (pre-configured dosemu hdimages):
	echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register

	- enable support for Windows executables using wine:
	echo ':DOSWin:M::MZ::/usr/local/bin/wine:' > register

	For java support see Documentation/java.txt


	You can enable/disable binfmt_misc or one binary type by echoing 0 (to disable)
	or 1 (to enable) to /proc/sys/fs/binfmt_misc/status or /proc/.../the_name.
	Catting the file tells you the current status of binfmt_misc/the entry.

	You can remove one entry or all entries by echoing -1 to /proc/.../the_name
	or /proc/sys/fs/binfmt_misc/status.


	HINTS:
	======

	If you want to pass special arguments to your interpreter, you can
	write a wrapper script for it. See Documentation/java.txt for an
	example.

	Your interpreter should NOT look in the PATH for the filename; the kernel
	passes it the full filename (or the file descriptor) to use. Using $PATH can
	cause unexpected behaviour and can be a security hazard.


	There is a web page about binfmt_misc at
	http://www.tat.physik.uni-tuebingen.de

	Richard Günther <rguenth@tat.physik.uni-tuebingen.de>