| /* |
| * Copyright © 2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| */ |
| #include <linux/firmware.h> |
| #include <linux/circ_buf.h> |
| #include "i915_drv.h" |
| #include "intel_guc.h" |
| |
| /** |
| * DOC: GuC-based command submission |
| * |
| * i915_guc_client: |
| * We use the term client to avoid confusion with contexts. A i915_guc_client is |
| * equivalent to GuC object guc_context_desc. This context descriptor is |
| * allocated from a pool of 1024 entries. Kernel driver will allocate doorbell |
| * and workqueue for it. Also the process descriptor (guc_process_desc), which |
| * is mapped to client space. So the client can write Work Item then ring the |
| * doorbell. |
| * |
| * To simplify the implementation, we allocate one gem object that contains all |
| * pages for doorbell, process descriptor and workqueue. |
| * |
| * The Scratch registers: |
| * There are 16 MMIO-based registers start from 0xC180. The kernel driver writes |
| * a value to the action register (SOFT_SCRATCH_0) along with any data. It then |
| * triggers an interrupt on the GuC via another register write (0xC4C8). |
| * Firmware writes a success/fail code back to the action register after |
| * processes the request. The kernel driver polls waiting for this update and |
| * then proceeds. |
| * See host2guc_action() |
| * |
| * Doorbells: |
| * Doorbells are interrupts to uKernel. A doorbell is a single cache line (QW) |
| * mapped into process space. |
| * |
| * Work Items: |
| * There are several types of work items that the host may place into a |
| * workqueue, each with its own requirements and limitations. Currently only |
| * WQ_TYPE_INORDER is needed to support legacy submission via GuC, which |
| * represents in-order queue. The kernel driver packs ring tail pointer and an |
| * ELSP context descriptor dword into Work Item. |
| * See guc_add_workqueue_item() |
| * |
| */ |
| |
| /* |
| * Read GuC command/status register (SOFT_SCRATCH_0) |
| * Return true if it contains a response rather than a command |
| */ |
| static inline bool host2guc_action_response(struct drm_i915_private *dev_priv, |
| u32 *status) |
| { |
| u32 val = I915_READ(SOFT_SCRATCH(0)); |
| *status = val; |
| return GUC2HOST_IS_RESPONSE(val); |
| } |
| |
| static int host2guc_action(struct intel_guc *guc, u32 *data, u32 len) |
| { |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| u32 status; |
| int i; |
| int ret; |
| |
| if (WARN_ON(len < 1 || len > 15)) |
| return -EINVAL; |
| |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| dev_priv->guc.action_count += 1; |
| dev_priv->guc.action_cmd = data[0]; |
| |
| for (i = 0; i < len; i++) |
| I915_WRITE(SOFT_SCRATCH(i), data[i]); |
| |
| POSTING_READ(SOFT_SCRATCH(i - 1)); |
| |
| I915_WRITE(HOST2GUC_INTERRUPT, HOST2GUC_TRIGGER); |
| |
| /* No HOST2GUC command should take longer than 10ms */ |
| ret = wait_for_atomic(host2guc_action_response(dev_priv, &status), 10); |
| if (status != GUC2HOST_STATUS_SUCCESS) { |
| /* |
| * Either the GuC explicitly returned an error (which |
| * we convert to -EIO here) or no response at all was |
| * received within the timeout limit (-ETIMEDOUT) |
| */ |
| if (ret != -ETIMEDOUT) |
| ret = -EIO; |
| |
| DRM_ERROR("GUC: host2guc action 0x%X failed. ret=%d " |
| "status=0x%08X response=0x%08X\n", |
| data[0], ret, status, |
| I915_READ(SOFT_SCRATCH(15))); |
| |
| dev_priv->guc.action_fail += 1; |
| dev_priv->guc.action_err = ret; |
| } |
| dev_priv->guc.action_status = status; |
| |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| |
| return ret; |
| } |
| |
| /* |
| * Tell the GuC to allocate or deallocate a specific doorbell |
| */ |
| |
| static int host2guc_allocate_doorbell(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| u32 data[2]; |
| |
| data[0] = HOST2GUC_ACTION_ALLOCATE_DOORBELL; |
| data[1] = client->ctx_index; |
| |
| return host2guc_action(guc, data, 2); |
| } |
| |
| static int host2guc_release_doorbell(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| u32 data[2]; |
| |
| data[0] = HOST2GUC_ACTION_DEALLOCATE_DOORBELL; |
| data[1] = client->ctx_index; |
| |
| return host2guc_action(guc, data, 2); |
| } |
| |
| static int host2guc_sample_forcewake(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| struct drm_device *dev = dev_priv->dev; |
| u32 data[2]; |
| |
| data[0] = HOST2GUC_ACTION_SAMPLE_FORCEWAKE; |
| /* WaRsDisableCoarsePowerGating:skl,bxt */ |
| if (!intel_enable_rc6(dev) || |
| NEEDS_WaRsDisableCoarsePowerGating(dev)) |
| data[1] = 0; |
| else |
| /* bit 0 and 1 are for Render and Media domain separately */ |
| data[1] = GUC_FORCEWAKE_RENDER | GUC_FORCEWAKE_MEDIA; |
| |
| return host2guc_action(guc, data, ARRAY_SIZE(data)); |
| } |
| |
| /* |
| * Initialise, update, or clear doorbell data shared with the GuC |
| * |
| * These functions modify shared data and so need access to the mapped |
| * client object which contains the page being used for the doorbell |
| */ |
| |
| static void guc_init_doorbell(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| struct guc_doorbell_info *doorbell; |
| void *base; |
| |
| base = kmap_atomic(i915_gem_object_get_page(client->client_obj, 0)); |
| doorbell = base + client->doorbell_offset; |
| |
| doorbell->db_status = 1; |
| doorbell->cookie = 0; |
| |
| kunmap_atomic(base); |
| } |
| |
| static int guc_ring_doorbell(struct i915_guc_client *gc) |
| { |
| struct guc_process_desc *desc; |
| union guc_doorbell_qw db_cmp, db_exc, db_ret; |
| union guc_doorbell_qw *db; |
| void *base; |
| int attempt = 2, ret = -EAGAIN; |
| |
| base = kmap_atomic(i915_gem_object_get_page(gc->client_obj, 0)); |
| desc = base + gc->proc_desc_offset; |
| |
| /* Update the tail so it is visible to GuC */ |
| desc->tail = gc->wq_tail; |
| |
| /* current cookie */ |
| db_cmp.db_status = GUC_DOORBELL_ENABLED; |
| db_cmp.cookie = gc->cookie; |
| |
| /* cookie to be updated */ |
| db_exc.db_status = GUC_DOORBELL_ENABLED; |
| db_exc.cookie = gc->cookie + 1; |
| if (db_exc.cookie == 0) |
| db_exc.cookie = 1; |
| |
| /* pointer of current doorbell cacheline */ |
| db = base + gc->doorbell_offset; |
| |
| while (attempt--) { |
| /* lets ring the doorbell */ |
| db_ret.value_qw = atomic64_cmpxchg((atomic64_t *)db, |
| db_cmp.value_qw, db_exc.value_qw); |
| |
| /* if the exchange was successfully executed */ |
| if (db_ret.value_qw == db_cmp.value_qw) { |
| /* db was successfully rung */ |
| gc->cookie = db_exc.cookie; |
| ret = 0; |
| break; |
| } |
| |
| /* XXX: doorbell was lost and need to acquire it again */ |
| if (db_ret.db_status == GUC_DOORBELL_DISABLED) |
| break; |
| |
| DRM_ERROR("Cookie mismatch. Expected %d, returned %d\n", |
| db_cmp.cookie, db_ret.cookie); |
| |
| /* update the cookie to newly read cookie from GuC */ |
| db_cmp.cookie = db_ret.cookie; |
| db_exc.cookie = db_ret.cookie + 1; |
| if (db_exc.cookie == 0) |
| db_exc.cookie = 1; |
| } |
| |
| /* Finally, update the cached copy of the GuC's WQ head */ |
| gc->wq_head = desc->head; |
| |
| kunmap_atomic(base); |
| return ret; |
| } |
| |
| static void guc_disable_doorbell(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| struct guc_doorbell_info *doorbell; |
| void *base; |
| i915_reg_t drbreg = GEN8_DRBREGL(client->doorbell_id); |
| int value; |
| |
| base = kmap_atomic(i915_gem_object_get_page(client->client_obj, 0)); |
| doorbell = base + client->doorbell_offset; |
| |
| doorbell->db_status = 0; |
| |
| kunmap_atomic(base); |
| |
| I915_WRITE(drbreg, I915_READ(drbreg) & ~GEN8_DRB_VALID); |
| |
| value = I915_READ(drbreg); |
| WARN_ON((value & GEN8_DRB_VALID) != 0); |
| |
| I915_WRITE(GEN8_DRBREGU(client->doorbell_id), 0); |
| I915_WRITE(drbreg, 0); |
| |
| /* XXX: wait for any interrupts */ |
| /* XXX: wait for workqueue to drain */ |
| } |
| |
| /* |
| * Select, assign and relase doorbell cachelines |
| * |
| * These functions track which doorbell cachelines are in use. |
| * The data they manipulate is protected by the host2guc lock. |
| */ |
| |
| static uint32_t select_doorbell_cacheline(struct intel_guc *guc) |
| { |
| const uint32_t cacheline_size = cache_line_size(); |
| uint32_t offset; |
| |
| /* Doorbell uses a single cache line within a page */ |
| offset = offset_in_page(guc->db_cacheline); |
| |
| /* Moving to next cache line to reduce contention */ |
| guc->db_cacheline += cacheline_size; |
| |
| DRM_DEBUG_DRIVER("selected doorbell cacheline 0x%x, next 0x%x, linesize %u\n", |
| offset, guc->db_cacheline, cacheline_size); |
| |
| return offset; |
| } |
| |
| static uint16_t assign_doorbell(struct intel_guc *guc, uint32_t priority) |
| { |
| /* |
| * The bitmap is split into two halves; the first half is used for |
| * normal priority contexts, the second half for high-priority ones. |
| * Note that logically higher priorities are numerically less than |
| * normal ones, so the test below means "is it high-priority?" |
| */ |
| const bool hi_pri = (priority <= GUC_CTX_PRIORITY_HIGH); |
| const uint16_t half = GUC_MAX_DOORBELLS / 2; |
| const uint16_t start = hi_pri ? half : 0; |
| const uint16_t end = start + half; |
| uint16_t id; |
| |
| id = find_next_zero_bit(guc->doorbell_bitmap, end, start); |
| if (id == end) |
| id = GUC_INVALID_DOORBELL_ID; |
| else |
| bitmap_set(guc->doorbell_bitmap, id, 1); |
| |
| DRM_DEBUG_DRIVER("assigned %s priority doorbell id 0x%x\n", |
| hi_pri ? "high" : "normal", id); |
| |
| return id; |
| } |
| |
| static void release_doorbell(struct intel_guc *guc, uint16_t id) |
| { |
| bitmap_clear(guc->doorbell_bitmap, id, 1); |
| } |
| |
| /* |
| * Initialise the process descriptor shared with the GuC firmware. |
| */ |
| static void guc_init_proc_desc(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| struct guc_process_desc *desc; |
| void *base; |
| |
| base = kmap_atomic(i915_gem_object_get_page(client->client_obj, 0)); |
| desc = base + client->proc_desc_offset; |
| |
| memset(desc, 0, sizeof(*desc)); |
| |
| /* |
| * XXX: pDoorbell and WQVBaseAddress are pointers in process address |
| * space for ring3 clients (set them as in mmap_ioctl) or kernel |
| * space for kernel clients (map on demand instead? May make debug |
| * easier to have it mapped). |
| */ |
| desc->wq_base_addr = 0; |
| desc->db_base_addr = 0; |
| |
| desc->context_id = client->ctx_index; |
| desc->wq_size_bytes = client->wq_size; |
| desc->wq_status = WQ_STATUS_ACTIVE; |
| desc->priority = client->priority; |
| |
| kunmap_atomic(base); |
| } |
| |
| /* |
| * Initialise/clear the context descriptor shared with the GuC firmware. |
| * |
| * This descriptor tells the GuC where (in GGTT space) to find the important |
| * data structures relating to this client (doorbell, process descriptor, |
| * write queue, etc). |
| */ |
| |
| static void guc_init_ctx_desc(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| struct intel_engine_cs *ring; |
| struct intel_context *ctx = client->owner; |
| struct guc_context_desc desc; |
| struct sg_table *sg; |
| int i; |
| |
| memset(&desc, 0, sizeof(desc)); |
| |
| desc.attribute = GUC_CTX_DESC_ATTR_ACTIVE | GUC_CTX_DESC_ATTR_KERNEL; |
| desc.context_id = client->ctx_index; |
| desc.priority = client->priority; |
| desc.db_id = client->doorbell_id; |
| |
| for_each_ring(ring, dev_priv, i) { |
| struct guc_execlist_context *lrc = &desc.lrc[ring->guc_id]; |
| struct drm_i915_gem_object *obj; |
| uint64_t ctx_desc; |
| |
| /* TODO: We have a design issue to be solved here. Only when we |
| * receive the first batch, we know which engine is used by the |
| * user. But here GuC expects the lrc and ring to be pinned. It |
| * is not an issue for default context, which is the only one |
| * for now who owns a GuC client. But for future owner of GuC |
| * client, need to make sure lrc is pinned prior to enter here. |
| */ |
| obj = ctx->engine[i].state; |
| if (!obj) |
| break; /* XXX: continue? */ |
| |
| ctx_desc = intel_lr_context_descriptor(ctx, ring); |
| lrc->context_desc = (u32)ctx_desc; |
| |
| /* The state page is after PPHWSP */ |
| lrc->ring_lcra = i915_gem_obj_ggtt_offset(obj) + |
| LRC_STATE_PN * PAGE_SIZE; |
| lrc->context_id = (client->ctx_index << GUC_ELC_CTXID_OFFSET) | |
| (ring->guc_id << GUC_ELC_ENGINE_OFFSET); |
| |
| obj = ctx->engine[i].ringbuf->obj; |
| |
| lrc->ring_begin = i915_gem_obj_ggtt_offset(obj); |
| lrc->ring_end = lrc->ring_begin + obj->base.size - 1; |
| lrc->ring_next_free_location = lrc->ring_begin; |
| lrc->ring_current_tail_pointer_value = 0; |
| |
| desc.engines_used |= (1 << ring->guc_id); |
| } |
| |
| WARN_ON(desc.engines_used == 0); |
| |
| /* |
| * The CPU address is only needed at certain points, so kmap_atomic on |
| * demand instead of storing it in the ctx descriptor. |
| * XXX: May make debug easier to have it mapped |
| */ |
| desc.db_trigger_cpu = 0; |
| desc.db_trigger_uk = client->doorbell_offset + |
| i915_gem_obj_ggtt_offset(client->client_obj); |
| desc.db_trigger_phy = client->doorbell_offset + |
| sg_dma_address(client->client_obj->pages->sgl); |
| |
| desc.process_desc = client->proc_desc_offset + |
| i915_gem_obj_ggtt_offset(client->client_obj); |
| |
| desc.wq_addr = client->wq_offset + |
| i915_gem_obj_ggtt_offset(client->client_obj); |
| |
| desc.wq_size = client->wq_size; |
| |
| /* |
| * XXX: Take LRCs from an existing intel_context if this is not an |
| * IsKMDCreatedContext client |
| */ |
| desc.desc_private = (uintptr_t)client; |
| |
| /* Pool context is pinned already */ |
| sg = guc->ctx_pool_obj->pages; |
| sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc), |
| sizeof(desc) * client->ctx_index); |
| } |
| |
| static void guc_fini_ctx_desc(struct intel_guc *guc, |
| struct i915_guc_client *client) |
| { |
| struct guc_context_desc desc; |
| struct sg_table *sg; |
| |
| memset(&desc, 0, sizeof(desc)); |
| |
| sg = guc->ctx_pool_obj->pages; |
| sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc), |
| sizeof(desc) * client->ctx_index); |
| } |
| |
| int i915_guc_wq_check_space(struct i915_guc_client *gc) |
| { |
| struct guc_process_desc *desc; |
| void *base; |
| u32 size = sizeof(struct guc_wq_item); |
| int ret = -ETIMEDOUT, timeout_counter = 200; |
| |
| if (!gc) |
| return 0; |
| |
| /* Quickly return if wq space is available since last time we cache the |
| * head position. */ |
| if (CIRC_SPACE(gc->wq_tail, gc->wq_head, gc->wq_size) >= size) |
| return 0; |
| |
| base = kmap_atomic(i915_gem_object_get_page(gc->client_obj, 0)); |
| desc = base + gc->proc_desc_offset; |
| |
| while (timeout_counter-- > 0) { |
| gc->wq_head = desc->head; |
| |
| if (CIRC_SPACE(gc->wq_tail, gc->wq_head, gc->wq_size) >= size) { |
| ret = 0; |
| break; |
| } |
| |
| if (timeout_counter) |
| usleep_range(1000, 2000); |
| }; |
| |
| kunmap_atomic(base); |
| |
| return ret; |
| } |
| |
| static int guc_add_workqueue_item(struct i915_guc_client *gc, |
| struct drm_i915_gem_request *rq) |
| { |
| struct guc_wq_item *wqi; |
| void *base; |
| u32 tail, wq_len, wq_off, space; |
| |
| space = CIRC_SPACE(gc->wq_tail, gc->wq_head, gc->wq_size); |
| if (WARN_ON(space < sizeof(struct guc_wq_item))) |
| return -ENOSPC; /* shouldn't happen */ |
| |
| /* postincrement WQ tail for next time */ |
| wq_off = gc->wq_tail; |
| gc->wq_tail += sizeof(struct guc_wq_item); |
| gc->wq_tail &= gc->wq_size - 1; |
| |
| /* For now workqueue item is 4 DWs; workqueue buffer is 2 pages. So we |
| * should not have the case where structure wqi is across page, neither |
| * wrapped to the beginning. This simplifies the implementation below. |
| * |
| * XXX: if not the case, we need save data to a temp wqi and copy it to |
| * workqueue buffer dw by dw. |
| */ |
| WARN_ON(sizeof(struct guc_wq_item) != 16); |
| WARN_ON(wq_off & 3); |
| |
| /* wq starts from the page after doorbell / process_desc */ |
| base = kmap_atomic(i915_gem_object_get_page(gc->client_obj, |
| (wq_off + GUC_DB_SIZE) >> PAGE_SHIFT)); |
| wq_off &= PAGE_SIZE - 1; |
| wqi = (struct guc_wq_item *)((char *)base + wq_off); |
| |
| /* len does not include the header */ |
| wq_len = sizeof(struct guc_wq_item) / sizeof(u32) - 1; |
| wqi->header = WQ_TYPE_INORDER | |
| (wq_len << WQ_LEN_SHIFT) | |
| (rq->ring->guc_id << WQ_TARGET_SHIFT) | |
| WQ_NO_WCFLUSH_WAIT; |
| |
| /* The GuC wants only the low-order word of the context descriptor */ |
| wqi->context_desc = (u32)intel_lr_context_descriptor(rq->ctx, rq->ring); |
| |
| /* The GuC firmware wants the tail index in QWords, not bytes */ |
| tail = rq->ringbuf->tail >> 3; |
| wqi->ring_tail = tail << WQ_RING_TAIL_SHIFT; |
| wqi->fence_id = 0; /*XXX: what fence to be here */ |
| |
| kunmap_atomic(base); |
| |
| return 0; |
| } |
| |
| /** |
| * i915_guc_submit() - Submit commands through GuC |
| * @client: the guc client where commands will go through |
| * @rq: request associated with the commands |
| * |
| * Return: 0 if succeed |
| */ |
| int i915_guc_submit(struct i915_guc_client *client, |
| struct drm_i915_gem_request *rq) |
| { |
| struct intel_guc *guc = client->guc; |
| unsigned int engine_id = rq->ring->guc_id; |
| int q_ret, b_ret; |
| |
| q_ret = guc_add_workqueue_item(client, rq); |
| if (q_ret == 0) |
| b_ret = guc_ring_doorbell(client); |
| |
| client->submissions[engine_id] += 1; |
| if (q_ret) { |
| client->q_fail += 1; |
| client->retcode = q_ret; |
| } else if (b_ret) { |
| client->b_fail += 1; |
| client->retcode = q_ret = b_ret; |
| } else { |
| client->retcode = 0; |
| } |
| guc->submissions[engine_id] += 1; |
| guc->last_seqno[engine_id] = rq->seqno; |
| |
| return q_ret; |
| } |
| |
| /* |
| * Everything below here is concerned with setup & teardown, and is |
| * therefore not part of the somewhat time-critical batch-submission |
| * path of i915_guc_submit() above. |
| */ |
| |
| /** |
| * gem_allocate_guc_obj() - Allocate gem object for GuC usage |
| * @dev: drm device |
| * @size: size of object |
| * |
| * This is a wrapper to create a gem obj. In order to use it inside GuC, the |
| * object needs to be pinned lifetime. Also we must pin it to gtt space other |
| * than [0, GUC_WOPCM_TOP) because this range is reserved inside GuC. |
| * |
| * Return: A drm_i915_gem_object if successful, otherwise NULL. |
| */ |
| static struct drm_i915_gem_object *gem_allocate_guc_obj(struct drm_device *dev, |
| u32 size) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj; |
| |
| obj = i915_gem_alloc_object(dev, size); |
| if (!obj) |
| return NULL; |
| |
| if (i915_gem_object_get_pages(obj)) { |
| drm_gem_object_unreference(&obj->base); |
| return NULL; |
| } |
| |
| if (i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, |
| PIN_OFFSET_BIAS | GUC_WOPCM_TOP)) { |
| drm_gem_object_unreference(&obj->base); |
| return NULL; |
| } |
| |
| /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */ |
| I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE); |
| |
| return obj; |
| } |
| |
| /** |
| * gem_release_guc_obj() - Release gem object allocated for GuC usage |
| * @obj: gem obj to be released |
| */ |
| static void gem_release_guc_obj(struct drm_i915_gem_object *obj) |
| { |
| if (!obj) |
| return; |
| |
| if (i915_gem_obj_is_pinned(obj)) |
| i915_gem_object_ggtt_unpin(obj); |
| |
| drm_gem_object_unreference(&obj->base); |
| } |
| |
| static void guc_client_free(struct drm_device *dev, |
| struct i915_guc_client *client) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| |
| if (!client) |
| return; |
| |
| if (client->doorbell_id != GUC_INVALID_DOORBELL_ID) { |
| /* |
| * First disable the doorbell, then tell the GuC we've |
| * finished with it, finally deallocate it in our bitmap |
| */ |
| guc_disable_doorbell(guc, client); |
| host2guc_release_doorbell(guc, client); |
| release_doorbell(guc, client->doorbell_id); |
| } |
| |
| /* |
| * XXX: wait for any outstanding submissions before freeing memory. |
| * Be sure to drop any locks |
| */ |
| |
| gem_release_guc_obj(client->client_obj); |
| |
| if (client->ctx_index != GUC_INVALID_CTX_ID) { |
| guc_fini_ctx_desc(guc, client); |
| ida_simple_remove(&guc->ctx_ids, client->ctx_index); |
| } |
| |
| kfree(client); |
| } |
| |
| /** |
| * guc_client_alloc() - Allocate an i915_guc_client |
| * @dev: drm device |
| * @priority: four levels priority _CRITICAL, _HIGH, _NORMAL and _LOW |
| * The kernel client to replace ExecList submission is created with |
| * NORMAL priority. Priority of a client for scheduler can be HIGH, |
| * while a preemption context can use CRITICAL. |
| * @ctx: the context that owns the client (we use the default render |
| * context) |
| * |
| * Return: An i915_guc_client object if success. |
| */ |
| static struct i915_guc_client *guc_client_alloc(struct drm_device *dev, |
| uint32_t priority, |
| struct intel_context *ctx) |
| { |
| struct i915_guc_client *client; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| struct drm_i915_gem_object *obj; |
| |
| client = kzalloc(sizeof(*client), GFP_KERNEL); |
| if (!client) |
| return NULL; |
| |
| client->doorbell_id = GUC_INVALID_DOORBELL_ID; |
| client->priority = priority; |
| client->owner = ctx; |
| client->guc = guc; |
| |
| client->ctx_index = (uint32_t)ida_simple_get(&guc->ctx_ids, 0, |
| GUC_MAX_GPU_CONTEXTS, GFP_KERNEL); |
| if (client->ctx_index >= GUC_MAX_GPU_CONTEXTS) { |
| client->ctx_index = GUC_INVALID_CTX_ID; |
| goto err; |
| } |
| |
| /* The first page is doorbell/proc_desc. Two followed pages are wq. */ |
| obj = gem_allocate_guc_obj(dev, GUC_DB_SIZE + GUC_WQ_SIZE); |
| if (!obj) |
| goto err; |
| |
| client->client_obj = obj; |
| client->wq_offset = GUC_DB_SIZE; |
| client->wq_size = GUC_WQ_SIZE; |
| |
| client->doorbell_offset = select_doorbell_cacheline(guc); |
| |
| /* |
| * Since the doorbell only requires a single cacheline, we can save |
| * space by putting the application process descriptor in the same |
| * page. Use the half of the page that doesn't include the doorbell. |
| */ |
| if (client->doorbell_offset >= (GUC_DB_SIZE / 2)) |
| client->proc_desc_offset = 0; |
| else |
| client->proc_desc_offset = (GUC_DB_SIZE / 2); |
| |
| client->doorbell_id = assign_doorbell(guc, client->priority); |
| if (client->doorbell_id == GUC_INVALID_DOORBELL_ID) |
| /* XXX: evict a doorbell instead */ |
| goto err; |
| |
| guc_init_proc_desc(guc, client); |
| guc_init_ctx_desc(guc, client); |
| guc_init_doorbell(guc, client); |
| |
| /* XXX: Any cache flushes needed? General domain mgmt calls? */ |
| |
| if (host2guc_allocate_doorbell(guc, client)) |
| goto err; |
| |
| DRM_DEBUG_DRIVER("new priority %u client %p: ctx_index %u db_id %u\n", |
| priority, client, client->ctx_index, client->doorbell_id); |
| |
| return client; |
| |
| err: |
| DRM_ERROR("FAILED to create priority %u GuC client!\n", priority); |
| |
| guc_client_free(dev, client); |
| return NULL; |
| } |
| |
| static void guc_create_log(struct intel_guc *guc) |
| { |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| struct drm_i915_gem_object *obj; |
| unsigned long offset; |
| uint32_t size, flags; |
| |
| if (i915.guc_log_level < GUC_LOG_VERBOSITY_MIN) |
| return; |
| |
| if (i915.guc_log_level > GUC_LOG_VERBOSITY_MAX) |
| i915.guc_log_level = GUC_LOG_VERBOSITY_MAX; |
| |
| /* The first page is to save log buffer state. Allocate one |
| * extra page for others in case for overlap */ |
| size = (1 + GUC_LOG_DPC_PAGES + 1 + |
| GUC_LOG_ISR_PAGES + 1 + |
| GUC_LOG_CRASH_PAGES + 1) << PAGE_SHIFT; |
| |
| obj = guc->log_obj; |
| if (!obj) { |
| obj = gem_allocate_guc_obj(dev_priv->dev, size); |
| if (!obj) { |
| /* logging will be off */ |
| i915.guc_log_level = -1; |
| return; |
| } |
| |
| guc->log_obj = obj; |
| } |
| |
| /* each allocated unit is a page */ |
| flags = GUC_LOG_VALID | GUC_LOG_NOTIFY_ON_HALF_FULL | |
| (GUC_LOG_DPC_PAGES << GUC_LOG_DPC_SHIFT) | |
| (GUC_LOG_ISR_PAGES << GUC_LOG_ISR_SHIFT) | |
| (GUC_LOG_CRASH_PAGES << GUC_LOG_CRASH_SHIFT); |
| |
| offset = i915_gem_obj_ggtt_offset(obj) >> PAGE_SHIFT; /* in pages */ |
| guc->log_flags = (offset << GUC_LOG_BUF_ADDR_SHIFT) | flags; |
| } |
| |
| static void init_guc_policies(struct guc_policies *policies) |
| { |
| struct guc_policy *policy; |
| u32 p, i; |
| |
| policies->dpc_promote_time = 500000; |
| policies->max_num_work_items = POLICY_MAX_NUM_WI; |
| |
| for (p = 0; p < GUC_CTX_PRIORITY_NUM; p++) { |
| for (i = GUC_RENDER_ENGINE; i < GUC_MAX_ENGINES_NUM; i++) { |
| policy = &policies->policy[p][i]; |
| |
| policy->execution_quantum = 1000000; |
| policy->preemption_time = 500000; |
| policy->fault_time = 250000; |
| policy->policy_flags = 0; |
| } |
| } |
| |
| policies->is_valid = 1; |
| } |
| |
| static void guc_create_ads(struct intel_guc *guc) |
| { |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| struct drm_i915_gem_object *obj; |
| struct guc_ads *ads; |
| struct guc_policies *policies; |
| struct guc_mmio_reg_state *reg_state; |
| struct intel_engine_cs *ring; |
| struct page *page; |
| u32 size, i; |
| |
| /* The ads obj includes the struct itself and buffers passed to GuC */ |
| size = sizeof(struct guc_ads) + sizeof(struct guc_policies) + |
| sizeof(struct guc_mmio_reg_state) + |
| GUC_S3_SAVE_SPACE_PAGES * PAGE_SIZE; |
| |
| obj = guc->ads_obj; |
| if (!obj) { |
| obj = gem_allocate_guc_obj(dev_priv->dev, PAGE_ALIGN(size)); |
| if (!obj) |
| return; |
| |
| guc->ads_obj = obj; |
| } |
| |
| page = i915_gem_object_get_page(obj, 0); |
| ads = kmap(page); |
| |
| /* |
| * The GuC requires a "Golden Context" when it reinitialises |
| * engines after a reset. Here we use the Render ring default |
| * context, which must already exist and be pinned in the GGTT, |
| * so its address won't change after we've told the GuC where |
| * to find it. |
| */ |
| ring = &dev_priv->ring[RCS]; |
| ads->golden_context_lrca = ring->status_page.gfx_addr; |
| |
| for_each_ring(ring, dev_priv, i) |
| ads->eng_state_size[ring->guc_id] = intel_lr_context_size(ring); |
| |
| /* GuC scheduling policies */ |
| policies = (void *)ads + sizeof(struct guc_ads); |
| init_guc_policies(policies); |
| |
| ads->scheduler_policies = i915_gem_obj_ggtt_offset(obj) + |
| sizeof(struct guc_ads); |
| |
| /* MMIO reg state */ |
| reg_state = (void *)policies + sizeof(struct guc_policies); |
| |
| for_each_ring(ring, dev_priv, i) { |
| reg_state->mmio_white_list[ring->guc_id].mmio_start = |
| ring->mmio_base + GUC_MMIO_WHITE_LIST_START; |
| |
| /* Nothing to be saved or restored for now. */ |
| reg_state->mmio_white_list[ring->guc_id].count = 0; |
| } |
| |
| ads->reg_state_addr = ads->scheduler_policies + |
| sizeof(struct guc_policies); |
| |
| ads->reg_state_buffer = ads->reg_state_addr + |
| sizeof(struct guc_mmio_reg_state); |
| |
| kunmap(page); |
| } |
| |
| /* |
| * Set up the memory resources to be shared with the GuC. At this point, |
| * we require just one object that can be mapped through the GGTT. |
| */ |
| int i915_guc_submission_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| const size_t ctxsize = sizeof(struct guc_context_desc); |
| const size_t poolsize = GUC_MAX_GPU_CONTEXTS * ctxsize; |
| const size_t gemsize = round_up(poolsize, PAGE_SIZE); |
| struct intel_guc *guc = &dev_priv->guc; |
| |
| if (!i915.enable_guc_submission) |
| return 0; /* not enabled */ |
| |
| if (guc->ctx_pool_obj) |
| return 0; /* already allocated */ |
| |
| guc->ctx_pool_obj = gem_allocate_guc_obj(dev_priv->dev, gemsize); |
| if (!guc->ctx_pool_obj) |
| return -ENOMEM; |
| |
| ida_init(&guc->ctx_ids); |
| |
| guc_create_log(guc); |
| |
| guc_create_ads(guc); |
| |
| return 0; |
| } |
| |
| int i915_guc_submission_enable(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| struct intel_context *ctx = dev_priv->kernel_context; |
| struct i915_guc_client *client; |
| |
| /* client for execbuf submission */ |
| client = guc_client_alloc(dev, GUC_CTX_PRIORITY_KMD_NORMAL, ctx); |
| if (!client) { |
| DRM_ERROR("Failed to create execbuf guc_client\n"); |
| return -ENOMEM; |
| } |
| |
| guc->execbuf_client = client; |
| |
| host2guc_sample_forcewake(guc, client); |
| |
| return 0; |
| } |
| |
| void i915_guc_submission_disable(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| |
| guc_client_free(dev, guc->execbuf_client); |
| guc->execbuf_client = NULL; |
| } |
| |
| void i915_guc_submission_fini(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| |
| gem_release_guc_obj(dev_priv->guc.ads_obj); |
| guc->ads_obj = NULL; |
| |
| gem_release_guc_obj(dev_priv->guc.log_obj); |
| guc->log_obj = NULL; |
| |
| if (guc->ctx_pool_obj) |
| ida_destroy(&guc->ctx_ids); |
| gem_release_guc_obj(guc->ctx_pool_obj); |
| guc->ctx_pool_obj = NULL; |
| } |
| |
| /** |
| * intel_guc_suspend() - notify GuC entering suspend state |
| * @dev: drm device |
| */ |
| int intel_guc_suspend(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| struct intel_context *ctx; |
| u32 data[3]; |
| |
| if (!i915.enable_guc_submission) |
| return 0; |
| |
| ctx = dev_priv->kernel_context; |
| |
| data[0] = HOST2GUC_ACTION_ENTER_S_STATE; |
| /* any value greater than GUC_POWER_D0 */ |
| data[1] = GUC_POWER_D1; |
| /* first page is shared data with GuC */ |
| data[2] = i915_gem_obj_ggtt_offset(ctx->engine[RCS].state); |
| |
| return host2guc_action(guc, data, ARRAY_SIZE(data)); |
| } |
| |
| |
| /** |
| * intel_guc_resume() - notify GuC resuming from suspend state |
| * @dev: drm device |
| */ |
| int intel_guc_resume(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_guc *guc = &dev_priv->guc; |
| struct intel_context *ctx; |
| u32 data[3]; |
| |
| if (!i915.enable_guc_submission) |
| return 0; |
| |
| ctx = dev_priv->kernel_context; |
| |
| data[0] = HOST2GUC_ACTION_EXIT_S_STATE; |
| data[1] = GUC_POWER_D0; |
| /* first page is shared data with GuC */ |
| data[2] = i915_gem_obj_ggtt_offset(ctx->engine[RCS].state); |
| |
| return host2guc_action(guc, data, ARRAY_SIZE(data)); |
| } |