| /* Copyright (c) 2014-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "skeleton64.dtsi" |
| #include <dt-bindings/clock/msm-clocks-8909.h> |
| #include <dt-bindings/clock/msm-clocks-a7.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. MSM8909"; |
| compatible = "qcom,msm8909"; |
| qcom,msm-id = <245 0>, |
| <258 0>, |
| <265 0>, |
| <275 0>; |
| interrupt-parent = <&wakegic>; |
| |
| aliases { |
| /* smdtty devices */ |
| smd1 = &smdtty_apps_fm; |
| smd2 = &smdtty_apps_riva_bt_acl; |
| smd3 = &smdtty_apps_riva_bt_cmd; |
| smd5 = &smdtty_apps_riva_ant_cmd; |
| smd6 = &smdtty_apps_riva_ant_data; |
| smd7 = &smdtty_data1; |
| smd8 = &smdtty_data4; |
| smd11 = &smdtty_data11; |
| smd21 = &smdtty_data21; |
| smd36 = &smdtty_loopback; |
| |
| sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ |
| sdhc2 = &sdhc_2; /* SDC2 SD card slot */ |
| spi0 = &spi_0; /* SPI0 controller device */ |
| spi2 = &spi_2; |
| spi4 = &spi_4; |
| i2c5 = &i2c_5; /* I2c5 cntroller device */ |
| i2c3 = &i2c_3; /* I2C3 controller */ |
| i2c1 = &i2c_1; /* I2C1 controller */ |
| i2c2 = &i2c_2; /* I2C2 NFC qup2 device */ |
| i2c4 = &i2c_4; /* I2C4 controller device */ |
| qpic_nand1 = &qnand_1; /* qpic nand controller */ |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| efficiency = <1024>; |
| sched-energy-costs = <&CPU_COST_0 &CLUSTER_COST_0>; |
| qcom,sleep-status = <&cpu0_slp_sts>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x1>; |
| efficiency = <1024>; |
| sched-energy-costs = <&CPU_COST_0 &CLUSTER_COST_0>; |
| qcom,sleep-status = <&cpu1_slp_sts>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x2>; |
| efficiency = <1024>; |
| sched-energy-costs = <&CPU_COST_0 &CLUSTER_COST_0>; |
| qcom,sleep-status = <&cpu2_slp_sts>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x3>; |
| efficiency = <1024>; |
| sched-energy-costs = <&CPU_COST_0 &CLUSTER_COST_0>; |
| qcom,sleep-status = <&cpu3_slp_sts>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| energy_costs: energy-costs { |
| compatible = "sched-energy"; |
| |
| CPU_COST_0: core-cost0 { |
| busy-cost-data = < |
| 400000 82 |
| 800000 164 |
| 1094400 290 |
| >; |
| idle-cost-data = < |
| 40 20 12 8 |
| >; |
| }; |
| CLUSTER_COST_0: cluster-cost0 { |
| busy-cost-data = < |
| 400000 23 |
| 800000 48 |
| 1094400 87 |
| >; |
| idle-cost-data = < |
| 4 3 2 1 |
| >; |
| }; |
| }; |
| |
| firmware: firmware { |
| android { |
| compatible = "android,firmware"; |
| fstab { |
| compatible = "android,fstab"; |
| vendor_fstab: vendor { |
| compatible = "android,vendor"; |
| dev = |
| "/dev/block/platform/soc/7824900.sdhci/by-name/vendor"; |
| type = "ext4"; |
| mnt_flags = "ro,barrier=1,discard"; |
| fsmgr_flags = "wait,verify"; |
| status = "ok"; |
| }; |
| system_fstab: system { |
| compatible = "android,system"; |
| dev = |
| "/dev/block/platform/soc/7824900.sdhci/by-name/system"; |
| type = "ext4"; |
| mnt_flags = "ro,barrier=1,discard"; |
| fsmgr_flags = "wait,verify"; |
| status = "ok"; |
| }; |
| }; |
| }; |
| }; |
| |
| reserved_mem: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| external_image_mem: external_image__region@0 { |
| reg = <0x0 0x87a00000 0x0 0x0600000>; |
| compatible = "removed-dma-pool"; |
| no-map; |
| }; |
| |
| modem_adsp_mem: modem_adsp_region@0 { |
| reg = <0x0 0x88000000 0x0 0x05500000>; |
| compatible = "removed-dma-pool"; |
| no-map; |
| }; |
| |
| peripheral_mem: pheripheral_region@0 { |
| reg = <0x0 0x8d500000 0x0 0x0700000>; |
| compatible = "removed-dma-pool"; |
| no-map; |
| }; |
| |
| venus_qseecom_mem: venus_qseecom_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alloc-ranges = <0x0 0x80000000 0x0 0x10000000>; |
| alignment = <0 0x400000>; |
| size = <0 0x0800000>; |
| }; |
| |
| qseecom_ta_mem: qseecom_ta_region { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x400000>; |
| }; |
| |
| audio_mem: audio_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x400000>; |
| }; |
| |
| adsp_mem: adsp_region@0 { |
| compatible = "shared-dma-pool"; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x400000>; |
| }; |
| |
| cont_splash_mem: splash_region@83000000 { |
| reg = <0x0 0x83000000 0x0 0xc00000>; |
| }; |
| |
| dump_mem: mem_dump_region { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0 0x100000>; |
| }; |
| |
| }; |
| |
| soc: soc { }; |
| }; |
| |
| #include "msm8909-ion.dtsi" |
| #include "msm8909-smp2p.dtsi" |
| #include "msm8909-ipcrouter.dtsi" |
| #include "msm-gdsc-8916.dtsi" |
| #include "msm-arm-smmu-8909.dtsi" |
| #include "msm8909-gpu.dtsi" |
| #include "msm8909-coresight.dtsi" |
| #include "msm8909-bus.dtsi" |
| #include "msm8909-vidc.dtsi" |
| #include "msm8909-mdss.dtsi" |
| #include "msm8909-mdss-pll.dtsi" |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #interrupt-cells = <3>; |
| reg = <0x0b000000 0x1000>, |
| <0x0b002000 0x1000>; |
| }; |
| |
| wakegic: wake-gic@601d0 { |
| compatible = "qcom,mpm-gic-msm8909", "qcom,mpm-gic"; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>; |
| reg = <0x601d0 0x1000>, |
| <0xb011008 0x4>; /* MSM_APCS_GCC_BASE 4K */ |
| reg-names = "vmpm", "ipc"; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #interrupt-cells = <3>; |
| }; |
| |
| wakegpio: wake-gpio { |
| compatible = "qcom,mpm-gpio-msm8909", "qcom,mpm-gpio"; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #interrupt-cells = <2>; |
| }; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x4ab000 0x4>, |
| <0x193d100 0x4>; |
| reg-names = "pshold-base", "tcsr-boot-misc-detect"; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <1 2 0xf08>, |
| <1 3 0xf08>, |
| <1 4 0xf08>, |
| <1 1 0xf08>; |
| clock-frequency = <19200000>; |
| }; |
| |
| timer@b020000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xb020000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@b021000 { |
| frame-number = <0>; |
| interrupts = <0 8 0x4>, |
| <0 7 0x4>; |
| reg = <0xb021000 0x1000>, |
| <0xb022000 0x1000>; |
| }; |
| frame@b023000 { |
| frame-number = <1>; |
| interrupts = <0 9 0x4>; |
| reg = <0xb023000 0x1000>; |
| status = "disabled"; |
| }; |
| frame@b024000 { |
| frame-number = <2>; |
| interrupts = <0 10 0x4>; |
| reg = <0xb024000 0x1000>; |
| status = "disabled"; |
| }; |
| frame@b025000 { |
| frame-number = <3>; |
| interrupts = <0 11 0x4>; |
| reg = <0xb025000 0x1000>; |
| status = "disabled"; |
| }; |
| frame@b026000 { |
| frame-number = <4>; |
| interrupts = <0 12 0x4>; |
| reg = <0xb026000 0x1000>; |
| status = "disabled"; |
| }; |
| frame@b027000 { |
| frame-number = <5>; |
| interrupts = <0 13 0x4>; |
| reg = <0xb027000 0x1000>; |
| status = "disabled"; |
| }; |
| frame@b028000 { |
| frame-number = <6>; |
| interrupts = <0 14 0x4>; |
| reg = <0xb028000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clock_rpm: qcom,rpmcc@1800000 { |
| compatible = "qcom,rpmcc-8909"; |
| reg = <0x1800000 0x80000>; |
| reg-names = "cc_base"; |
| #clock-cells = <1>; |
| }; |
| |
| clock_gcc: qcom,gcc@1800000 { |
| compatible = "qcom,gcc-8909"; |
| reg = <0x1800000 0x80000>, |
| <0xb016000 0x00040>; |
| reg-names = "cc_base", "apcs_base"; |
| qcom,gfx3d_clk_src-opp-store-vcorner = <&msm_gpu>; |
| vdd_dig-supply = <&pm8909_s1_corner>; |
| vdd_sr2_dig-supply = <&pm8909_s1_corner_ao>; |
| vdd_sr2_pll-supply = <&pm8909_l7_ao>; |
| clocks = <&clock_rpm clk_xo_clk_src>, |
| <&clock_rpm clk_xo_a_clk_src>; |
| clock-names = "xo", "xo_a"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock_gcc_mdss: qcom,gcc-mdss@1ac8300 { |
| compatible = "qcom,gcc-mdss-8909"; |
| clocks = <&mdss_dsi0_pll clk_dsi_pll0_pixel_clk_src>, |
| <&mdss_dsi0_pll clk_dsi_pll0_byte_clk_src>; |
| clock-names = "pclk0_src", "byte0_src"; |
| #clock-cells = <1>; |
| }; |
| |
| clock_debug: qcom,cc-debug@1874000 { |
| compatible = "qcom,cc-debug-8909"; |
| reg = <0x1874000 0x4>, |
| <0xb01101c 0x8>; |
| reg-names = "cc_base", "meas"; |
| clocks = <&clock_rpm clk_rpm_debug_mux>; |
| clock-names = "rpm_debug_mux"; |
| #clock-cells = <1>; |
| }; |
| |
| clock_cpu: qcom,clock-a7@0b011050 { |
| compatible = "qcom,clock-a53-8916"; |
| reg = <0x0b011050 0x8>, |
| <0x0005c00c 0x8>; |
| reg-names = "rcg-base", "efuse"; |
| qcom,safe-freq = < 400000000 >; |
| cpu-vdd-supply = <&pm8909_s1_corner_ao>; |
| qcom,enable-opp; |
| clocks = <&clock_gcc clk_gpll0_ao_clk_src>, |
| <&clock_gcc clk_a7sspll>; |
| clock-names = "clk-4", "clk-5"; |
| qcom,speed0-bin-v0 = |
| < 0 0>, |
| < 400000000 4>, |
| < 800000000 5>, |
| < 1267200000 7>; |
| qcom,speed2-bin-v0 = |
| < 0 0>, |
| < 400000000 4>, |
| < 800000000 5>, |
| < 1094400000 7>; |
| #clock-cells = <1>; |
| }; |
| |
| cpubw: qcom,cpubw { |
| compatible = "qcom,devbw"; |
| governor = "cpufreq"; |
| qcom,src-dst-ports = <1 512>; |
| qcom,active-only; |
| qcom,bw-tbl = |
| < 762 /* 100 MHz */>, |
| < 1525 /* 200 MHz */>, |
| < 3051 /* 400 MHz */>, |
| < 4066 /* 533 MHz */>; |
| }; |
| |
| devfreq-cpufreq { |
| cpubw-cpufreq { |
| target-dev = <&cpubw>; |
| cpu-to-dev-map = |
| < 400000 762>, |
| < 800000 1525>, |
| < 998400 3051>, |
| < 1094400 4066>; |
| }; |
| }; |
| |
| qcom,cpu-bwmon { |
| compatible = "qcom,bimc-bwmon2"; |
| reg = <0x408000 0x300>, <0x401000 0x200>; |
| reg-names = "base", "global_base"; |
| interrupts = <0 183 4>; |
| qcom,mport = <0>; |
| qcom,target-dev = <&cpubw>; |
| }; |
| |
| qcom,msm-cpufreq { |
| reg = <0 4>; |
| compatible = "qcom,msm-cpufreq"; |
| clocks = <&clock_cpu clk_a7ssmux>, |
| <&clock_cpu clk_a7ssmux>, |
| <&clock_cpu clk_a7ssmux>, |
| <&clock_cpu clk_a7ssmux>; |
| clock-names = "cpu0_clk", "cpu1_clk", |
| "cpu2_clk", "cpu3_clk"; |
| qcom,cpufreq-table = |
| < 200000 >, |
| < 400000 >, |
| < 533330 >, |
| < 800000 >, |
| < 998400 >, |
| < 1094400 >, |
| < 1190400 >, |
| < 1248000 >, |
| < 1267200 >; |
| }; |
| |
| |
| blsp1_uart1: serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uart"; |
| reg = <0x78af000 0x200>; |
| interrupts = <0 107 0>; |
| status = "disabled"; |
| clocks = <&clock_gcc clk_gcc_blsp1_uart1_apps_clk>, |
| <&clock_gcc clk_gcc_blsp1_ahb_clk>; |
| clock-names = "core", "iface"; |
| }; |
| |
| blsp1_uart2_hs: uart@78b0000 { /*BLSP1 UART2*/ |
| compatible = "qcom,msm-hsuart-v14"; |
| reg = <0x78b0000 0x200>, |
| <0x7884000 0x1f000>; |
| reg-names = "core_mem", "bam_mem"; |
| interrupt-names = "core_irq", "bam_irq", "wakeup_irq"; |
| #address-cells = <0>; |
| interrupt-parent = <&blsp1_uart2_hs>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 108 0 |
| 1 &intc 0 238 0 |
| 2 &msm_gpio 21 0>; |
| qcom,inject-rx-on-wakeup; |
| qcom,rx-char-to-inject = <0xfd>; |
| qcom,master-id = <86>; |
| clock-names = "core_clk", "iface_clk"; |
| clocks = <&clock_gcc clk_gcc_blsp1_uart2_apps_clk>, |
| <&clock_gcc clk_gcc_blsp1_ahb_clk>; |
| pinctrl-names = "sleep", "default"; |
| pinctrl-0 = <&blsp1_uart2_tx_sleep>, <&blsp1_uart2_rxcts_sleep>, |
| <&blsp1_uart2_rfr_sleep>; |
| pinctrl-1 = <&blsp1_uart2_tx_active>, |
| <&blsp1_uart2_rxcts_active>, <&blsp1_uart2_rfr_active>; |
| |
| qcom,bam-tx-ep-pipe-index = <2>; |
| qcom,bam-rx-ep-pipe-index = <3>; |
| qcom,msm-bus,name = "blsp1_uart2_hs"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <86 512 0 0>, |
| <86 512 500 800>; |
| status = "disabled"; |
| }; |
| |
| qcom,sps { |
| compatible = "qcom,msm_sps_4k"; |
| qcom,device-type = <3>; |
| qcom,pipe-attr-ee; |
| }; |
| |
| thermal_zones: thermal-zones {}; |
| |
| mem_dump { |
| compatible = "qcom,mem-dump"; |
| memory-region = <&dump_mem>; |
| |
| rpm_sw_dump { |
| qcom,dump-size = <0x28000>; |
| qcom,dump-id = <0xea>; |
| }; |
| |
| pmic_dump { |
| qcom,dump-size = <0x10000>; |
| qcom,dump-id = <0xe4>; |
| }; |
| |
| vsense_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0xe9>; |
| }; |
| |
| tmc_etf_dump { |
| qcom,dump-size = <0x10000>; |
| qcom,dump-id = <0xf0>; |
| }; |
| |
| tmc_etr_reg_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0x100>; |
| }; |
| |
| tmc_etf_reg_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0x101>; |
| }; |
| |
| misc_data_dump { |
| qcom,dump-size = <0x1000>; |
| qcom,dump-id = <0xe8>; |
| }; |
| |
| }; |
| |
| tsens0: tsens@4a8000 { |
| compatible = "qcom,msm8909-tsens"; |
| reg = <0x4a8000 0x1000>, |
| <0x4a9000 0x1000>, |
| <0x5c000 0x1000>; |
| reg-names = "tsens_srot_physical", |
| "tsens_tm_physical", "tsens_eeprom_physical"; |
| interrupts = <0 184 0>; |
| interrupt-names = "tsens-upper-lower"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| qcom,ipc-spinlock@1905000 { |
| compatible = "qcom,ipc-spinlock-sfpb"; |
| reg = <0x1905000 0x8000>; |
| qcom,num-locks = <8>; |
| }; |
| |
| qcom,smem@87d00000 { |
| compatible = "qcom,smem"; |
| reg = <0x87d00000 0x100000>, |
| <0x0b011008 0x4>, |
| <0x60000 0x8000>, |
| <0x193D000 0x8>; |
| reg-names = "smem", "irq-reg-base", |
| "aux-mem1", "smem_targ_info_reg"; |
| qcom,mpu-enabled; |
| |
| qcom,smd-modem { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <0>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x1000>; |
| interrupts = <0 25 1>; |
| label = "modem"; |
| qcom,not-loadable; |
| }; |
| |
| qcom,smsm-modem { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <0>; |
| qcom,smsm-irq-offset = <0x0>; |
| qcom,smsm-irq-bitmask = <0x2000>; |
| interrupts = <0 26 1>; |
| }; |
| |
| qcom,smd-wcnss { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <6>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x20000>; |
| interrupts = <0 142 1>; |
| label = "wcnss"; |
| }; |
| |
| qcom,smsm-wcnss { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <6>; |
| qcom,smsm-irq-offset = <0x0>; |
| qcom,smsm-irq-bitmask = <0x80000>; |
| interrupts = <0 144 1>; |
| }; |
| |
| qcom,smd-rpm { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <15>; |
| qcom,smd-irq-offset = <0x0>; |
| qcom,smd-irq-bitmask = <0x1>; |
| interrupts = <0 168 1>; |
| label = "rpm"; |
| qcom,irq-no-suspend; |
| qcom,not-loadable; |
| }; |
| }; |
| |
| rpm_bus: qcom,rpm-smd { |
| compatible = "qcom,rpm-smd"; |
| rpm-channel-name = "rpm_requests"; |
| rpm-channel-type = <15>; /* SMD_APPS_RPM */ |
| }; |
| |
| qcom,bam_dmux@4044000 { |
| compatible = "qcom,bam_dmux"; |
| reg = <0x4044000 0x19000>; |
| interrupts = <0 29 1>; |
| qcom,rx-ring-size = <32>; |
| qcom,max-rx-mtu = <4096>; |
| qcom,fast-shutdown; |
| qcom,no-cpu-affinity; |
| }; |
| |
| qcom,smdtty { |
| compatible = "qcom,smdtty"; |
| |
| smdtty_apps_fm: qcom,smdtty-apps-fm { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_FM"; |
| }; |
| |
| smdtty_apps_riva_bt_acl: smdtty-apps-riva-bt-acl { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_BT_ACL"; |
| }; |
| |
| smdtty_apps_riva_bt_cmd: qcom,smdtty-apps-riva-bt-cmd { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_BT_CMD"; |
| }; |
| |
| smdtty_apps_riva_ant_cmd: smdtty-apps-riva-ant-cmd { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_ANT_CMD"; |
| }; |
| |
| smdtty_apps_riva_ant_data: smdtty-apps-riva-ant-data { |
| qcom,smdtty-remote = "wcnss"; |
| qcom,smdtty-port-name = "APPS_RIVA_ANT_DATA"; |
| }; |
| |
| smdtty_data1: qcom,smdtty-data1 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA1"; |
| }; |
| |
| smdtty_data4: qcom,smdtty-data4 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA4"; |
| }; |
| |
| smdtty_data11: qcom,smdtty-data11 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA11"; |
| }; |
| |
| smdtty_data21: qcom,smdtty-data21 { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "DATA21"; |
| }; |
| |
| smdtty_loopback: smdtty-loopback { |
| qcom,smdtty-remote = "modem"; |
| qcom,smdtty-port-name = "LOOPBACK"; |
| qcom,smdtty-dev-name = "LOOPBACK_TTY"; |
| }; |
| }; |
| |
| qcom,smdpkt { |
| compatible = "qcom,smdpkt"; |
| |
| qcom,smdpkt-data5-cntl { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA5_CNTL"; |
| qcom,smdpkt-dev-name = "smdcntl0"; |
| }; |
| |
| qcom,smdpkt-data22 { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA22"; |
| qcom,smdpkt-dev-name = "smd22"; |
| }; |
| |
| qcom,smdpkt-data40-cntl { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA40_CNTL"; |
| qcom,smdpkt-dev-name = "smdcntl8"; |
| }; |
| |
| qcom,smdpkt-data2 { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "DATA2"; |
| qcom,smdpkt-dev-name = "at_mdm0"; |
| }; |
| |
| qcom,smdpkt-apr-apps2 { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "apr_apps2"; |
| qcom,smdpkt-dev-name = "apr_apps2"; |
| }; |
| |
| qcom,smdpkt-loopback { |
| qcom,smdpkt-remote = "modem"; |
| qcom,smdpkt-port-name = "LOOPBACK"; |
| qcom,smdpkt-dev-name = "smd_pkt_loopback"; |
| }; |
| }; |
| |
| wcnss: qcom,wcnss-wlan@a000000 { |
| compatible = "qcom,wcnss_wlan"; |
| reg = <0x0a000000 0x280000>, |
| <0xb011008 0x04>, |
| <0x0a21b000 0x3000>, |
| <0x03204000 0x00000100>, |
| <0x03200800 0x00000200>, |
| <0x0A100400 0x00000200>, |
| <0x0A205050 0x00000200>, |
| <0x0A219000 0x00000020>, |
| <0x0A080488 0x00000008>, |
| <0x0A080fb0 0x00000008>, |
| <0x0A08040c 0x00000008>, |
| <0x0A0120a8 0x00000008>, |
| <0x0A012448 0x00000008>, |
| <0x0A080c00 0x00000001>, |
| <0x0005E000 0x00000064>; |
| |
| reg-names = "wcnss_mmio", "wcnss_fiq", |
| "pronto_phy_base", "riva_phy_base", |
| "riva_ccu_base", "pronto_a2xb_base", |
| "pronto_ccpu_base", "pronto_saw2_base", |
| "wlan_tx_phy_aborts","wlan_brdg_err_source", |
| "wlan_tx_status", "alarms_txctl", |
| "alarms_tactl", "pronto_mcu_base", |
| "pronto_qfuse"; |
| |
| interrupts = <0 145 0 0 146 0>; |
| interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq"; |
| |
| qcom,pronto-vddmx-supply = <&pm8909_l3_corner_ao>; |
| qcom,pronto-vddcx-supply = <&pm8909_s1_corner>; |
| qcom,pronto-vddpx-supply = <&pm8909_l7>; |
| qcom,iris-vddxo-supply = <&pm8909_l7>; |
| qcom,iris-vddrfa-supply = <&pm8909_l10>; |
| qcom,iris-vddpa-supply = <&pm8909_l9>; |
| qcom,iris-vdddig-supply = <&pm8909_l5>; |
| |
| qcom,iris-vddxo-voltage-level = <1800000 0 1800000>; |
| qcom,iris-vddrfa-voltage-level = <1300000 0 1300000>; |
| qcom,iris-vddpa-voltage-level = <3300000 0 3300000>; |
| qcom,iris-vdddig-voltage-level = <1800000 0 1800000>; |
| |
| qcom,vddmx-voltage-level = <5 1 7>; |
| qcom,vddcx-voltage-level = <5 1 7>; |
| qcom,vddpx-voltage-level = <1800000 0 1800000>; |
| |
| qcom,iris-vddxo-current = <10000>; |
| qcom,iris-vddrfa-current = <100000>; |
| qcom,iris-vddpa-current = <515000>; |
| qcom,iris-vdddig-current = <10000>; |
| |
| qcom,pronto-vddmx-current = <0>; |
| qcom,pronto-vddcx-current = <0>; |
| qcom,pronto-vddpx-current = <0>; |
| |
| pinctrl-names = "wcnss_default", "wcnss_sleep", |
| "wcnss_gpio_default"; |
| pinctrl-0 = <&wcnss_default>; |
| pinctrl-1 = <&wcnss_sleep>; |
| pinctrl-2 = <&wcnss_gpio_default>; |
| |
| gpios = <&msm_gpio 40 0>, <&msm_gpio 41 0>, <&msm_gpio 42 0>, |
| <&msm_gpio 43 0>, <&msm_gpio 44 0>; |
| |
| clocks = <&clock_rpm clk_xo_wlan_clk>, |
| <&clock_rpm clk_rf_clk2>, |
| <&clock_debug clk_gcc_debug_mux>, |
| <&clock_gcc clk_wcnss_m_clk>; |
| clock-names = "xo", "rf_clk", "measure", "wcnss_debug"; |
| |
| qcom,wlan-rx-buff-count = <512>; |
| qcom,has-autodetect-xo; |
| qcom,is-pronto-v3; |
| qcom,is-dual-band-disabled; |
| qcom,is-pronto-vadc; |
| qcom,has-pronto-hw; |
| qcom,wcnss-adc_tm = <&pm8909_adc_tm>; |
| }; |
| |
| usb_otg: usb@78d9000 { |
| compatible = "qcom,hsusb-otg"; |
| reg = <0x78d9000 0x400>, <0x6c000 0x200>; |
| reg-names = "core", "phy_csr"; |
| |
| interrupts = <0 134 0>,<0 140 0>; |
| interrupt-names = "core_irq", "async_irq"; |
| |
| hsusb_vdd_dig-supply = <&pm8909_l2>; |
| HSUSB_1p8-supply = <&pm8909_l7>; |
| HSUSB_3p3-supply = <&pm8909_l13>; |
| qcom,vdd-voltage-level = <0 1200000 1200000>; |
| |
| qcom,hsusb-otg-phy-init-seq = <0x73 0x80 0xffffffff>; |
| qcom,hsusb-otg-phy-type = <3>; /* SNPS Femto PHY */ |
| qcom,hsusb-otg-mode = <1>; /* DEVICE only */ |
| qcom,hsusb-otg-otg-control = <2>; /* PMIC */ |
| qcom,dp-manual-pullup; |
| qcom,phy-dvdd-always-on; |
| qcom,hsusb-otg-delay-lpm; |
| qcom,hsusb-otg-mpm-dpsehv-int = <49>; |
| qcom,hsusb-otg-mpm-dmsehv-int = <58>; |
| |
| qcom,msm-bus,name = "usb2"; |
| qcom,msm-bus,num-cases = <3>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <87 512 0 0>, |
| <87 512 80000 0>, |
| <87 512 6000 6000>; |
| clocks = <&clock_gcc clk_gcc_usb_hs_ahb_clk>, |
| <&clock_gcc clk_gcc_usb_hs_system_clk>, |
| <&clock_gcc clk_gcc_usb2a_phy_sleep_clk>, |
| <&clock_rpm clk_bimc_usb_a_clk>, |
| <&clock_rpm clk_snoc_usb_a_clk>, |
| <&clock_rpm clk_pcnoc_usb_a_clk>, |
| <&clock_gcc clk_gcc_qusb2_phy_clk>, |
| <&clock_gcc clk_gcc_usb2_hs_phy_only_clk>, |
| <&clock_gcc clk_gcc_usb_hs_phy_cfg_ahb_clk>, |
| <&clock_rpm clk_xo_otg_clk>; |
| clock-names = "iface_clk", "core_clk", "sleep_clk", |
| "bimc_clk", "snoc_clk", "pcnoc_clk", |
| "phy_reset_clk", "phy_por_clk", "phy_csr_clk", |
| "xo"; |
| qcom,bus-clk-rate = <400000000 200000000 100000000>; |
| qcom,max-nominal-sysclk-rate = <100000000>; |
| qcom,boost-sysclk-with-streaming; |
| resets = <&clock_gcc GCC_USB_HS_BCR>, |
| <&clock_gcc GCC_QUSB2_PHY_BCR>, |
| <&clock_gcc GCC_USB2_HS_PHY_ONLY_BCR>; |
| reset-names = "core_reset", "phy_reset", "phy_por_reset"; |
| }; |
| |
| android_usb: android_usb@086000c8 { |
| compatible = "qcom,android-usb"; |
| reg = <0x086000c8 0xc8>; |
| qcom,pm-qos-latency = <2 1001 12701>; |
| }; |
| |
| qcom,usbbam@78c4000 { |
| compatible = "qcom,usb-bam-msm"; |
| reg = <0x78c4000 0x15000>; |
| reg-names = "hsusb"; |
| interrupts = <0 135 0>; |
| interrupt-names = "hsusb"; |
| qcom,bam-type = <1>; |
| qcom,usb-bam-num-pipes = <2>; |
| qcom,usb-bam-fifo-baseaddr = <0x08603800>; |
| qcom,ignore-core-reset-ack; |
| qcom,disable-clk-gating; |
| qcom,reset-bam-on-disconnect; |
| |
| qcom,pipe0 { |
| label = "hsusb-qdss-in-0"; |
| qcom,usb-bam-mem-type = <2>; |
| qcom,dir = <1>; |
| qcom,pipe-num = <0>; |
| qcom,peer-bam = <0>; |
| qcom,peer-bam-physical-address = <0x884000>; |
| qcom,src-bam-pipe-index = <0>; |
| qcom,dst-bam-pipe-index = <0>; |
| qcom,data-fifo-offset = <0x0>; |
| qcom,data-fifo-size = <0x600>; |
| qcom,descriptor-fifo-offset = <0x600>; |
| qcom,descriptor-fifo-size = <0x200>; |
| }; |
| }; |
| |
| spmi_bus: qcom,spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x200f000 0x1000>, |
| <0x2400000 0x400000>, |
| <0x2c00000 0x400000>, |
| <0x3800000 0x200000>, |
| <0x200a000 0x2100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <0 190 0>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <4>; |
| interrupt-controller; |
| cell-index = <0>; |
| }; |
| |
| qcom,rmtfs_sharedmem@87c00000 { |
| |
| compatible = "qcom,sharedmem-uio"; |
| reg = <0x87c00000 0xe0000>; |
| reg-names = "rmtfs"; |
| qcom,client-id = <0x00000001>; |
| }; |
| |
| qcom,dsp_sharedmem@87ce0000 { |
| compatible = "qcom,sharedmem-uio"; |
| reg = <0x87ce0000 0x10000>; |
| reg-names = "rfsa_dsp"; |
| qcom,client-id = <0x011013ec>; |
| }; |
| |
| qcom,mdm_sharedmem@87cf0000 { |
| compatible = "qcom,sharedmem-uio"; |
| reg = <0x87cf0000 0x10000>; |
| reg-names = "rfsa_mdm"; |
| qcom,client-id = <0x011013ed>; |
| }; |
| |
| cpu-pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| qcom,irq-is-percpu; |
| interrupts = <1 7 0xf00>; |
| }; |
| |
| jtag_fuse: jtagfuse@5e01c { |
| compatible = "qcom,jtag-fuse-v2"; |
| reg = <0x5e01c 0x8>; |
| reg-names = "fuse-base"; |
| }; |
| |
| jtag_mm0: jtagmm@84c000 { |
| compatible = "qcom,jtag-mm"; |
| reg = <0x84c000 0x1000>, |
| <0x840000 0x1000>; |
| reg-names = "etm-base","debug-base"; |
| |
| clocks = <&clock_rpm clk_qdss_clk>, |
| <&clock_rpm clk_qdss_a_clk>; |
| clock-names = "core_clk", "core_a_clk"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU0>; |
| }; |
| |
| jtag_mm1: jtagmm@84d000 { |
| compatible = "qcom,jtag-mm"; |
| reg = <0x84d000 0x1000>, |
| <0x842000 0x1000>; |
| reg-names = "etm-base","debug-base"; |
| |
| clocks = <&clock_rpm clk_qdss_clk>, |
| <&clock_rpm clk_qdss_a_clk>; |
| clock-names = "core_clk", "core_a_clk"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU1>; |
| }; |
| |
| jtag_mm2: jtagmm@84e000 { |
| compatible = "qcom,jtag-mm"; |
| reg = <0x84e000 0x1000>, |
| <0x844000 0x1000>; |
| reg-names = "etm-base","debug-base"; |
| |
| clocks = <&clock_rpm clk_qdss_clk>, |
| <&clock_rpm clk_qdss_a_clk>; |
| clock-names = "core_clk", "core_a_clk"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU2>; |
| }; |
| |
| jtag_mm3: jtagmm@84f000 { |
| compatible = "qcom,jtag-mm"; |
| reg = <0x84f000 0x1000>, |
| <0x846000 0x1000>; |
| reg-names = "etm-base","debug-base"; |
| |
| clocks = <&clock_rpm clk_qdss_clk>, |
| <&clock_rpm clk_qdss_a_clk>; |
| clock-names = "core_clk", "core_a_clk"; |
| |
| qcom,coresight-jtagmm-cpu = <&CPU3>; |
| }; |
| |
| qnand_1: nand@7980000 { |
| compatible = "qcom,msm-nand"; |
| reg = <0x7980000 0x1000>, |
| <0x7984000 0x1a000>, |
| <0x5e02c 0x4>; |
| reg-names = "nand_phys", |
| "bam_phys", "boot_cfg"; |
| qcom,reg-adjustment-offset = <0>; |
| interrupts = <0 132 0>; |
| interrupt-names = "bam_irq"; |
| |
| qcom,msm-bus,name = "qpic_nand"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <91 512 0 0>, |
| /* Voting for max b/w on PNOC bus for now */ |
| <91 512 400000 800000>; |
| |
| clock-names = "core_clk"; |
| clocks = <&clock_rpm clk_qpic_clk>; |
| status = "disabled"; |
| }; |
| |
| sdhc_1: sdhci@7824000 { |
| compatible = "qcom,sdhci-msm"; |
| reg = <0x07824900 0x11c>, <0x07824000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 123 0>, <0 138 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| qcom,bus-width = <8>; |
| |
| qcom,pm-qos-irq-type = "affine_irq"; |
| qcom,pm-qos-irq-latency = <2 250>; |
| |
| qcom,msm-bus,name = "sdhc1"; |
| qcom,msm-bus,num-cases = <8>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = <78 512 0 0>, /* No vote */ |
| <78 512 1046 3200>, /* 400 KB/s*/ |
| <78 512 52286 160000>, /* 20 MB/s */ |
| <78 512 65360 200000>, /* 25 MB/s */ |
| <78 512 130718 400000>, /* 50 MB/s */ |
| <78 512 261438 800000>, /* 100 MB/s */ |
| <78 512 261438 800000>, /* 200 MB/s */ |
| <78 512 1338562 4096000>; /* Max. bandwidth */ |
| qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000 |
| 100000000 200000000 4294967295>; |
| |
| |
| clocks = <&clock_gcc clk_gcc_sdcc1_ahb_clk>, |
| <&clock_gcc clk_gcc_sdcc1_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,clk-rates = <400000 25000000 50000000 100000000 177770000>; |
| qcom,devfreq,freq-table = <50000000 177770000>; |
| |
| status = "disabled"; |
| }; |
| |
| sdhc_2: sdhci@07864000 { |
| compatible = "qcom,sdhci-msm"; |
| reg = <0x07864900 0x11c>, <0x07864000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 125 0>, <0 221 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| qcom,bus-width = <4>; |
| |
| qcom,pm-qos-irq-type = "affine_irq"; |
| qcom,pm-qos-irq-latency = <2 250>; |
| |
| qcom,msm-bus,name = "sdhc2"; |
| qcom,msm-bus,num-cases = <8>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = <81 512 0 0>, /* No vote */ |
| <81 512 1046 3200>, /* 400 KB/s*/ |
| <81 512 52286 160000>, /* 20 MB/s */ |
| <81 512 65360 200000>, /* 25 MB/s */ |
| <81 512 130718 400000>, /* 50 MB/s */ |
| <81 512 261438 800000>, /* 100 MB/s */ |
| <81 512 261438 800000>, /* 200 MB/s */ |
| <81 512 1338562 4096000>; /* Max. bandwidth */ |
| qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000 |
| 100000000 200000000 4294967295>; |
| |
| clocks = <&clock_gcc clk_gcc_sdcc2_ahb_clk>, |
| <&clock_gcc clk_gcc_sdcc2_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,devfreq,freq-table = <50000000 200000000>; |
| |
| status = "disabled"; |
| }; |
| |
| qcom,wdt@b017000 { |
| compatible = "qcom,msm-watchdog"; |
| reg = <0xb017000 0x1000>; |
| reg-names = "wdt-base"; |
| interrupts = <0 3 0>, <0 4 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping; |
| }; |
| |
| qcom,msm-rtb { |
| compatible = "qcom,msm-rtb"; |
| qcom,rtb-size = <0x100000>; /* 1M EBI1 buffer */ |
| }; |
| |
| qcom,msm-imem@8600000 { |
| compatible = "qcom,msm-imem"; |
| reg = <0x08600000 0x1000>; /* Address and size of IMEM */ |
| ranges = <0x0 0x08600000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mem_dump_table@10 { |
| compatible = "qcom,msm-imem-mem_dump_table"; |
| reg = <0x10 8>; |
| }; |
| |
| boot_stats@6b0 { |
| compatible = "qcom,msm-imem-boot_stats"; |
| reg = <0x6b0 32>; |
| }; |
| |
| pil@94c { |
| compatible = "qcom,msm-imem-pil"; |
| reg = <0x94c 200>; |
| }; |
| |
| restart_reason@65c { |
| compatible = "qcom,msm-imem-restart_reason"; |
| reg = <0x65c 4>; |
| }; |
| }; |
| |
| qcom,mpm2-sleep-counter@4a3000 { |
| compatible = "qcom,mpm2-sleep-counter"; |
| reg = <0x4a3000 0x1000>; |
| clock-frequency = <32768>; |
| }; |
| |
| spi_0: spi@78ba000 { /* BLSP1 QUP6 */ |
| compatible = "qcom,spi-qup-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "spi_physical", "spi_bam_physical"; |
| reg = <0x78ba000 0x600>, |
| <0x7884000 0x23000>; |
| interrupt-names = "spi_irq", "spi_bam_irq"; |
| interrupts = <0 100 0>, <0 238 0>; |
| spi-max-frequency = <19200000>; |
| pinctrl-names = "spi_default", "spi_sleep"; |
| pinctrl-0 = <&spi0_default &spi0_cs0_active>; |
| pinctrl-1 = <&spi0_sleep &spi0_cs0_sleep>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup6_spi_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,infinite-mode = <0>; |
| qcom,use-bam; |
| qcom,use-pinctrl; |
| qcom,ver-reg-exists; |
| qcom,bam-consumer-pipe-index = <14>; |
| qcom,bam-producer-pipe-index = <15>; |
| qcom,master-id = <86>; |
| }; |
| |
| spi_2: spi@78b6000 { /* BLSP1 QUP2 */ |
| compatible = "qcom,spi-qup-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "spi_physical", "spi_bam_physical"; |
| reg = <0x78b6000 0x600>, |
| <0x7884000 0x23000>; |
| interrupt-names = "spi_irq", "spi_bam_irq"; |
| interrupts = <0 96 0>, <0 238 0>; |
| spi-max-frequency = <50000000>; |
| pinctrl-names = "spi_default", "spi_sleep"; |
| pinctrl-0 = <&spi2_default &spi2_cs0_active>; |
| pinctrl-1 = <&spi2_sleep &spi2_cs0_sleep>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup2_spi_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,infinite-mode = <0>; |
| qcom,use-bam; |
| qcom,use-pinctrl; |
| qcom,ver-reg-exists; |
| qcom,bam-consumer-pipe-index = <6>; |
| qcom,bam-producer-pipe-index = <7>; |
| qcom,master-id = <86>; |
| status = "disabled"; |
| }; |
| |
| spi_4: spi@78B8000{ /* BLSP1 QUP4 */ |
| compatible = "qcom,spi-qup-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "spi_physical", "spi_bam_physical"; |
| reg = <0x78b8000 0x600>, |
| <0x7884000 0x23000>; |
| interrupt-names = "spi_irq", "spi_bam_irq"; |
| interrupts = <0 98 0>, <0 238 0>; |
| spi-max-frequency = <50000000>; |
| pinctrl-names = "spi_default", "spi_sleep"; |
| pinctrl-0 = <&spi4_default &spi4_cs0_active>; |
| pinctrl-1 = <&spi4_sleep &spi4_cs0_sleep>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup4_spi_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,infinite-mode = <0>; |
| qcom,use-bam; |
| qcom,use-pinctrl; |
| qcom,ver-reg-exists; |
| qcom,bam-consumer-pipe-index = <10>; |
| qcom,bam-producer-pipe-index = <11>; |
| qcom,master-id = <86>; |
| status = "disabled"; |
| }; |
| |
| dma_blsp1: qcom,sps-dma@7884000 { /* BLSP1 */ |
| #dma-cells = <4>; |
| compatible = "qcom,sps-dma"; |
| reg = <0x7884000 0x23000>; |
| interrupts = <0 238 0>; |
| qcom,summing-threshold = <10>; |
| }; |
| |
| i2c_2: i2c@78b6000 { /* BLSP1 QUP2 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b6000 0x1000>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 96 0>; |
| qcom,clk-freq-out = <400000>; |
| qcom,clk-freq-in = <19200000>; |
| clock-names = "iface_clk", "core_clk"; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup2_i2c_apps_clk>; |
| |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_2_active>; |
| pinctrl-1 = <&i2c_2_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| dmas = <&dma_blsp1 6 64 0x20000020 0x20>, |
| <&dma_blsp1 7 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| qcom,master-id = <86>; |
| }; |
| |
| i2c_4: i2c@78b8000 { /* BLSP1 QUP4 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b8000 0x1000>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 98 0>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup4_i2c_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,clk-freq-out = <400000>; |
| qcom,clk-freq-in = <19200000>; |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_4_active>; |
| pinctrl-1 = <&i2c_4_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| dmas = <&dma_blsp1 10 64 0x20000020 0x20>, |
| <&dma_blsp1 11 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| qcom,master-id = <86>; |
| }; |
| |
| i2c_5: i2c@78b9000 { /* BLSP1 QUP5 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b9000 0x1000>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 99 0>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup5_i2c_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,clk-freq-out = <100000>; |
| qcom,clk-freq-in = <19200000>; |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_5_active>; |
| pinctrl-1 = <&i2c_5_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| dmas = <&dma_blsp1 12 64 0x20000020 0x20>, |
| <&dma_blsp1 13 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| qcom,master-id = <86>; |
| }; |
| |
| i2c_3: i2c@78b7000 { /* BLSP1 QUP3 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b7000 0x1000>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 97 0>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup3_i2c_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,clk-freq-out = <100000>; |
| qcom,clk-freq-in = <19200000>; |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_3_active>; |
| pinctrl-1 = <&i2c_3_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| dmas = <&dma_blsp1 8 64 0x20000020 0x20>, |
| <&dma_blsp1 9 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| qcom,master-id = <86>; |
| }; |
| |
| i2c_1: i2c@78b5000 { /* BLSP1 QUP1 */ |
| compatible = "qcom,i2c-msm-v2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| reg = <0x78b5000 0x1000>; |
| interrupt-names = "qup_irq"; |
| interrupts = <0 95 0>; |
| clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>, |
| <&clock_gcc clk_gcc_blsp1_qup1_i2c_apps_clk>; |
| clock-names = "iface_clk", "core_clk"; |
| qcom,clk-freq-out = <400000>; |
| qcom,clk-freq-in = <19200000>; |
| pinctrl-names = "i2c_active", "i2c_sleep"; |
| pinctrl-0 = <&i2c_1_active>; |
| pinctrl-1 = <&i2c_1_sleep>; |
| qcom,noise-rjct-scl = <0>; |
| qcom,noise-rjct-sda = <0>; |
| dmas = <&dma_blsp1 4 64 0x20000020 0x20>, |
| <&dma_blsp1 5 32 0x20000020 0x20>; |
| dma-names = "tx", "rx"; |
| qcom,master-id = <86>; |
| }; |
| |
| qcom,venus@1de0000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x1de0000 0x4000>; |
| |
| vdd-supply = <&gdsc_venus>; |
| qcom,proxy-reg-names = "vdd"; |
| |
| clocks = <&clock_gcc clk_gcc_venus0_vcodec0_clk>, |
| <&clock_gcc clk_gcc_venus0_ahb_clk>, |
| <&clock_gcc clk_gcc_venus0_axi_clk>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>, |
| <&clock_gcc clk_crypto_clk_src>; |
| |
| clock-names = "core_clk", "iface_clk", "bus_clk", |
| "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| |
| qcom,proxy-clock-names = "core_clk", "iface_clk", |
| "bus_clk", "scm_core_clk", |
| "scm_iface_clk", "scm_bus_clk", |
| "scm_core_clk_src"; |
| qcom,scm_core_clk_src-freq = <80000000>; |
| |
| qcom,pas-id = <9>; |
| qcom,mas-crypto = <&mas_crypto>; |
| qcom,proxy-timeout-ms = <100>; |
| qcom,firmware-name = "venus"; |
| memory-region = <&venus_qseecom_mem>; |
| }; |
| |
| pcm0: qcom,msm-pcm { |
| compatible = "qcom,msm-pcm-dsp"; |
| qcom,msm-pcm-dsp-id = <0>; |
| }; |
| |
| routing: qcom,msm-pcm-routing { |
| compatible = "qcom,msm-pcm-routing"; |
| }; |
| |
| pcm1: qcom,msm-pcm-low-latency { |
| compatible = "qcom,msm-pcm-dsp"; |
| qcom,msm-pcm-dsp-id = <1>; |
| qcom,msm-pcm-low-latency; |
| qcom,latency-level = "regular"; |
| }; |
| |
| pcm2: qcom,msm-ultra-low-latency { |
| compatible = "qcom,msm-pcm-dsp"; |
| qcom,msm-pcm-dsp-id = <2>; |
| qcom,msm-pcm-low-latency; |
| qcom,latency-level = "ultra"; |
| }; |
| |
| pcm_noirq: qcom,msm-pcm-dsp-noirq { |
| compatible = "qcom,msm-pcm-dsp-noirq"; |
| qcom,msm-pcm-low-latency; |
| qcom,latency-level = "ultra"; |
| }; |
| |
| lpa: qcom,msm-pcm-lpa { |
| compatible = "qcom,msm-pcm-lpa"; |
| }; |
| |
| compress: qcom,msm-compress-dsp { |
| compatible = "qcom,msm-compress-dsp"; |
| }; |
| |
| voip: qcom,msm-voip-dsp { |
| compatible = "qcom,msm-voip-dsp"; |
| }; |
| |
| voice: qcom,msm-pcm-voice { |
| compatible = "qcom,msm-pcm-voice"; |
| qcom,destroy-cvd; |
| qcom,vote-bms; |
| }; |
| |
| stub_codec: qcom,msm-stub-codec { |
| compatible = "qcom,msm-stub-codec"; |
| }; |
| |
| qcom,msm-dai-fe { |
| compatible = "qcom,msm-dai-fe"; |
| }; |
| |
| afe: qcom,msm-pcm-afe { |
| compatible = "qcom,msm-pcm-afe"; |
| }; |
| |
| voice_svc: qcom,msm-voice-svc { |
| compatible = "qcom,msm-voice-svc"; |
| }; |
| |
| loopback: qcom,msm-pcm-loopback { |
| compatible = "qcom,msm-pcm-loopback"; |
| }; |
| |
| pcm_noirq: qcom,msm-pcm-dsp-noirq { |
| compatible = "qcom,msm-pcm-dsp-noirq"; |
| qcom,msm-pcm-low-latency; |
| qcom,latency-level = "ultra"; |
| }; |
| |
| qcom,msm-dai-mi2s { |
| compatible = "qcom,msm-dai-mi2s"; |
| dai_mi2s0: qcom,msm-dai-q6-mi2s-prim { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <0>; |
| qcom,msm-mi2s-rx-lines = <3>; |
| qcom,msm-mi2s-tx-lines = <0>; |
| }; |
| |
| dai_mi2s1: qcom,msm-dai-q6-mi2s-sec { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <1>; |
| qcom,msm-mi2s-rx-lines = <1>; |
| qcom,msm-mi2s-tx-lines = <0>; |
| }; |
| |
| dai_mi2s2: qcom,msm-dai-q6-mi2s-tert { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <2>; |
| qcom,msm-mi2s-rx-lines = <0>; |
| qcom,msm-mi2s-tx-lines = <3>; |
| }; |
| |
| dai_mi2s3: qcom,msm-dai-q6-mi2s-quat { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <3>; |
| qcom,msm-mi2s-rx-lines = <0>; |
| qcom,msm-mi2s-tx-lines = <3>; |
| }; |
| |
| dai_mi2s4: qcom,msm-dai-q6-mi2s-quin { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <4>; |
| qcom,msm-mi2s-rx-lines = <1>; |
| qcom,msm-mi2s-tx-lines = <2>; |
| }; |
| |
| dai_mi2s5: qcom,msm-dai-q6-mi2s-senary { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <6>; |
| qcom,msm-mi2s-rx-lines = <0>; |
| qcom,msm-mi2s-tx-lines = <3>; |
| }; |
| }; |
| |
| dai_hdmi: qcom,msm-dai-q6-hdmi { |
| compatible = "qcom,msm-dai-q6-hdmi"; |
| qcom,msm-dai-q6-dev-id = <8>; |
| }; |
| |
| lsm: qcom,msm-lsm-client { |
| compatible = "qcom,msm-lsm-client"; |
| }; |
| |
| qcom,msm-dai-q6 { |
| compatible = "qcom,msm-dai-q6"; |
| sb_0_rx: qcom,msm-dai-q6-sb-0-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16384>; |
| }; |
| |
| sb_0_tx: qcom,msm-dai-q6-sb-0-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16385>; |
| }; |
| |
| sb_1_rx: qcom,msm-dai-q6-sb-1-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16386>; |
| }; |
| |
| sb_1_tx: qcom,msm-dai-q6-sb-1-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16387>; |
| }; |
| |
| sb_3_rx: qcom,msm-dai-q6-sb-3-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16390>; |
| }; |
| |
| sb_3_tx: qcom,msm-dai-q6-sb-3-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16391>; |
| }; |
| |
| sb_4_rx: qcom,msm-dai-q6-sb-4-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16392>; |
| }; |
| |
| sb_4_tx: qcom,msm-dai-q6-sb-4-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <16393>; |
| }; |
| |
| bt_sco_rx: qcom,msm-dai-q6-bt-sco-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12288>; |
| }; |
| |
| bt_sco_tx: qcom,msm-dai-q6-bt-sco-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12289>; |
| }; |
| |
| bt_a2dp_rx: qcom,msm-dai-q6-bt-a2dp-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12290>; |
| }; |
| |
| int_fm_rx: qcom,msm-dai-q6-int-fm-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12292>; |
| }; |
| |
| int_fm_tx: qcom,msm-dai-q6-int-fm-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <12293>; |
| }; |
| |
| afe_pcm_rx: qcom,msm-dai-q6-be-afe-pcm-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <224>; |
| }; |
| |
| afe_pcm_tx: qcom,msm-dai-q6-be-afe-pcm-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <225>; |
| }; |
| |
| afe_proxy_rx: qcom,msm-dai-q6-afe-proxy-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <241>; |
| }; |
| |
| afe_proxy_tx: qcom,msm-dai-q6-afe-proxy-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <240>; |
| }; |
| |
| afe_loopback_tx: qcom,msm-dai-q6-afe-loopback-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <24577>; |
| }; |
| |
| incall_record_rx: qcom,msm-dai-q6-incall-record-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <32771>; |
| }; |
| |
| incall_record_tx: qcom,msm-dai-q6-incall-record-tx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <32772>; |
| }; |
| |
| incall_music_rx: qcom,msm-dai-q6-incall-music-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <32773>; |
| }; |
| |
| incall_music_2_rx: qcom,msm-dai-q6-incall-music-2-rx { |
| compatible = "qcom,msm-dai-q6-dev"; |
| qcom,msm-dai-q6-dev-id = <32770>; |
| }; |
| }; |
| |
| hostless: qcom,msm-pcm-hostless { |
| compatible = "qcom,msm-pcm-hostless"; |
| }; |
| |
| dai_pri_auxpcm: qcom,msm-pri-auxpcm { |
| compatible = "qcom,msm-auxpcm-dev"; |
| qcom,msm-cpudai-auxpcm-mode = <0>, <0>; |
| qcom,msm-cpudai-auxpcm-sync = <1>, <1>; |
| qcom,msm-cpudai-auxpcm-frame = <5>, <4>; |
| qcom,msm-cpudai-auxpcm-quant = <2>, <2>; |
| qcom,msm-cpudai-auxpcm-num-slots = <1>, <1>; |
| qcom,msm-cpudai-auxpcm-slot-mapping = <1>, <1>; |
| qcom,msm-cpudai-auxpcm-data = <0>, <0>; |
| qcom,msm-cpudai-auxpcm-pcm-clk-rate = <2048000>, <2048000>; |
| qcom,msm-auxpcm-interface = "primary"; |
| }; |
| |
| qcom,msm-audio-ion { |
| compatible = "qcom,msm-audio-ion"; |
| }; |
| |
| qcom,msm-audio-apr { |
| compatible = "qcom,msm-audio-apr"; |
| msm_audio_apr_dummy { |
| compatible = "qcom,msm-audio-apr-dummy"; |
| }; |
| }; |
| |
| qcom,mdsprpc-mem { |
| compatible = "qcom,msm-mdsprpc-mem-region"; |
| memory-region = <&adsp_mem>; |
| }; |
| |
| qcom,msm-adsprpc-mem { |
| compatible = "qcom,msm-adsprpc-mem-region"; |
| memory-region = <&adsp_mem>; |
| restrict-access; |
| }; |
| |
| qcom,msm_fastrpc { |
| compatible = "qcom,msm-fastrpc-legacy-compute"; |
| }; |
| |
| qcom,msm-adsp-loader { |
| compatible = "qcom,adsp-loader"; |
| qcom,adsp-state = <0>; |
| qcom,proc-img-to-load = "modem"; |
| }; |
| |
| qcom,avtimer@770600c { |
| compatible = "qcom,avtimer"; |
| reg = <0x0770600C 0x4>, |
| <0x07706010 0x4>; |
| reg-names = "avtimer_lsb_addr", "avtimer_msb_addr"; |
| qcom,clk-div = <27>; |
| }; |
| |
| qcom,memshare { |
| compatible = "qcom,memshare"; |
| |
| qcom,client_1 { |
| compatible = "qcom,memshare-peripheral"; |
| qcom,peripheral-size = <0x200000>; |
| qcom,client-id = <0>; |
| qcom,allocate-boot-time; |
| label = "modem"; |
| }; |
| |
| qcom,client_2 { |
| compatible = "qcom,memshare-peripheral"; |
| qcom,peripheral-size = <0x300000>; |
| qcom,client-id = <2>; |
| label = "modem"; |
| }; |
| |
| qcom,client_3 { |
| compatible = "qcom,memshare-peripheral"; |
| qcom,peripheral-size = <0>; |
| qcom,client-id = <1>; |
| label = "modem"; |
| }; |
| }; |
| |
| |
| qcom_tzlog: tz-log@8600720 { |
| compatible = "qcom,tz-log"; |
| reg = <0x08600720 0x1000>; |
| status = "disabled"; |
| }; |
| |
| qcom_rng: qrng@22000 { |
| compatible = "qcom,msm-rng"; |
| reg = <0x22000 0x200>; |
| qcom,msm-rng-iface-clk; |
| qcom,msm-bus,name = "msm-rng-noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <1 618 0 0>, /* No vote */ |
| <1 618 0 800>; /* 100 MB/s */ |
| clocks = <&clock_gcc clk_gcc_prng_ahb_clk>; |
| clock-names = "iface_clk"; |
| status = "disabled"; |
| }; |
| |
| qcom_crypto: qcrypto@720000 { |
| compatible = "qcom,qcrypto"; |
| reg = <0x720000 0x20000>, |
| <0x704000 0x20000>; |
| reg-names = "crypto-base","crypto-bam-base"; |
| interrupts = <0 207 0>; |
| qcom,bam-pipe-pair = <2>; |
| qcom,ce-hw-instance = <0>; |
| qcom,ce-device = <0>; |
| qcom,clk-mgmt-sus-res; |
| qcom,msm-bus,name = "qcrypto-noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <55 512 0 0>, |
| <55 512 393600 800000>; /* 49.2MHz & 100MHz */ |
| clocks = <&clock_gcc clk_crypto_clk_src>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>; |
| clock-names = "core_clk_src", "core_clk", |
| "iface_clk", "bus_clk"; |
| qcom,use-sw-aes-cbc-ecb-ctr-algo; |
| qcom,use-sw-aes-xts-algo; |
| qcom,use-sw-ahash-algo; |
| status = "disabled"; |
| qcom,ce-opp-freq = <100000000>; |
| }; |
| |
| qcom_cedev: qcedev@720000 { |
| compatible = "qcom,qcedev"; |
| reg = <0x720000 0x20000>, |
| <0x704000 0x20000>; |
| reg-names = "crypto-base","crypto-bam-base"; |
| interrupts = <0 207 0>; |
| qcom,bam-pipe-pair = <1>; |
| qcom,ce-hw-instance = <0>; |
| qcom,ce-device = <0>; |
| qcom,ce-hw-shared; |
| qcom,msm-bus,name = "qcedev-noc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <55 512 0 0>, |
| <55 512 3936000 393600>; |
| clocks = <&clock_gcc clk_crypto_clk_src>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>; |
| clock-names = "core_clk_src", "core_clk", |
| "iface_clk", "bus_clk"; |
| status = "disabled"; |
| qcom,ce-opp-freq = <100000000>; |
| }; |
| |
| qcom_seecom: qseecom@87a00000 { |
| compatible = "qcom,qseecom"; |
| reg = <0x87a00000 0x200000>; |
| reg-names = "secapp-region"; |
| qcom,disk-encrypt-pipe-pair = <2>; |
| qcom,hlos-ce-hw-instance = <0>; |
| qcom,qsee-ce-hw-instance = <0>; |
| qcom,msm-bus,name = "qseecom-noc"; |
| qcom,msm-bus,num-cases = <4>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,support-bus-scaling; |
| qcom,support-fde; |
| qcom,msm-bus,vectors-KBps = |
| <55 512 0 0>, |
| <55 512 0 0>, |
| <55 512 120000 1200000>, |
| <55 512 393600 3936000>; |
| clocks = <&clock_gcc clk_crypto_clk_src>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>; |
| clock-names = "core_clk_src", "core_clk", |
| "iface_clk", "bus_clk"; |
| status = "disabled"; |
| qcom,ce-opp-freq = <100000000>; |
| }; |
| |
| qcom,pronto@a21b000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x0a21b000 0x3000>; |
| interrupts = <0 149 1>; |
| |
| vdd_pronto_pll-supply = <&pm8909_l7>; |
| proxy-reg-names = "vdd_pronto_pll"; |
| vdd_pronto_pll-uV-uA = <1800000 18000>; |
| clocks = <&clock_rpm clk_xo_pil_pronto_clk>, |
| <&clock_gcc clk_gcc_crypto_clk>, |
| <&clock_gcc clk_gcc_crypto_ahb_clk>, |
| <&clock_gcc clk_gcc_crypto_axi_clk>, |
| <&clock_gcc clk_crypto_clk_src>; |
| |
| clock-names = "xo", "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| qcom,proxy-clock-names = "xo", "scm_core_clk", "scm_iface_clk", |
| "scm_bus_clk", "scm_core_clk_src"; |
| qcom,scm_core_clk_src = <80000000>; |
| |
| qcom,pas-id = <6>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,smem-id = <422>; |
| qcom,sysmon-id = <6>; |
| qcom,ssctl-instance-id = <0x13>; |
| qcom,firmware-name = "wcnss"; |
| qcom,mas-crypto = <&mas_crypto>; |
| |
| /* GPIO inputs from wcnss */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_4_in 0 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_4_in 1 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_4_in 2 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_4_in 3 0>; |
| |
| /* GPIO output to wcnss */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_4_out 0 0>; |
| memory-region = <&peripheral_mem>; |
| }; |
| |
| qcom,mss@4080000 { |
| compatible = "qcom,pil-q6v55-mss"; |
| reg = <0x04080000 0x100>, |
| <0x0194f000 0x010>, |
| <0x01950000 0x008>, |
| <0x01951000 0x008>, |
| <0x04020000 0x040>, |
| <0x0183e000 0x004>; |
| reg-names = "qdsp6_base", "halt_q6", "halt_modem", "halt_nc", |
| "rmb_base", "restart_reg"; |
| |
| interrupts = <0 24 1>; |
| vdd_cx-supply = <&pm8909_s1_corner>; |
| vdd_cx-voltage = <7>; |
| vdd_mx-supply = <&pm8909_l3_corner_ao>; |
| vdd_mx-uV = <3>; |
| vdd_pll-supply = <&pm8909_l7>; |
| qcom,vdd_pll = <1800000>; |
| |
| clocks = <&clock_rpm clk_xo_pil_mss_clk>, |
| <&clock_gcc clk_gcc_mss_cfg_ahb_clk>, |
| <&clock_gcc clk_gcc_mss_q6_bimc_axi_clk>, |
| <&clock_gcc clk_gcc_boot_rom_ahb_clk>; |
| clock-names = "xo", "iface_clk", "bus_clk", "mem_clk"; |
| qcom,proxy-clock-names = "xo"; |
| qcom,active-clock-names = "iface_clk", "bus_clk", "mem_clk"; |
| |
| qcom,firmware-name = "modem"; |
| qcom,pil-self-auth; |
| qcom,sysmon-id = <0>; |
| qcom,ssctl-instance-id = <0x12>; |
| qcom,reset-clk; |
| |
| /* GPIO inputs from mss */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_1_in 1 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_1_in 2 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_1_in 3 0>; |
| |
| /* GPIO output to mss */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>; |
| memory-region = <&modem_adsp_mem>; |
| }; |
| |
| cpu0_slp_sts: cpu-sleep-status@b088008 { |
| reg = <0xb088008 0x100>; |
| qcom,sleep-status-mask= <0x80000>; |
| }; |
| |
| cpu1_slp_sts: cpu-sleep-status@b098008 { |
| reg = <0xb098008 0x100>; |
| qcom,sleep-status-mask= <0x80000>; |
| }; |
| |
| cpu2_slp_sts: cpu-sleep-status@b0a8008 { |
| reg = <0xb0a8008 0x100>; |
| qcom,sleep-status-mask= <0x80000>; |
| }; |
| |
| cpu3_slp_sts: cpu-sleep-status@b0b8008 { |
| reg = <0xb0b8008 0x100>; |
| qcom,sleep-status-mask= <0x80000>; |
| }; |
| }; |
| |
| &gdsc_venus { |
| clock-names = "bus_clk", "core_clk"; |
| clocks = <&clock_gcc clk_gcc_venus0_axi_clk>, |
| <&clock_gcc clk_gcc_venus0_vcodec0_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_venus_core0 { |
| qcom,support-hw-trigger; |
| clock-names = "core0_clk"; |
| clocks = <&clock_gcc clk_gcc_venus0_core0_vcodec0_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_mdss { |
| clock-names = "core_clk", "bus_clk"; |
| clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>, |
| <&clock_gcc clk_gcc_mdss_axi_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_vfe { |
| clock-names = "core_clk", "bus_clk", "csi_clk"; |
| clocks = <&clock_gcc clk_gcc_camss_vfe0_clk>, |
| <&clock_gcc clk_gcc_camss_vfe_axi_clk>, |
| <&clock_gcc clk_gcc_camss_csi_vfe0_clk>; |
| status = "okay"; |
| }; |
| |
| &gdsc_oxili_gx { |
| clock-names = "core_clk"; |
| clocks = <&clock_gcc clk_gcc_oxili_gfx3d_clk>; |
| status = "okay"; |
| }; |
| #include "msm8909-thermal.dtsi" |