drivers/media/video/ovcamchip/ov76be.c - kernel/msm-4.9 - Gitiles

 /* OmniVision OV76BE Camera Chip Support Code
  *
  * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
  * http://alpha.dyndns.org/ov511/
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
  */

 #define DEBUG

 #include <linux/slab.h>
 #include "ovcamchip_priv.h"

 /* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
  * for now. */
 #define REG_GAIN		0x00	/* gain [5:0] */
 #define REG_BLUE		0x01	/* blue channel balance */
 #define REG_RED			0x02	/* red channel balance */
 #define REG_SAT			0x03	/* saturation */
 #define REG_CNT			0x05	/* Y contrast */
 #define REG_BRT			0x06	/* Y brightness */
 #define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
 #define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
 #define REG_GAMMA_COEFF		0x0E	/* gamma settings */
 #define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
 #define REG_EXP			0x10	/* manual exposure setting */
 #define REG_CLOCK		0x11	/* polarity/clock prescaler */
 #define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
 #define REG_HWIN_START		0x17	/* horizontal window start */
 #define REG_HWIN_END		0x18	/* horizontal window end */
 #define REG_VWIN_START		0x19	/* vertical window start */
 #define REG_VWIN_END		0x1A	/* vertical window end */
 #define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
 #define REG_YOFFSET		0x21	/* Y channel offset */
 #define REG_UOFFSET		0x22	/* U channel offset */
 #define REG_ECW			0x24	/* exposure white level for AEC */
 #define REG_ECB			0x25	/* exposure black level for AEC */
 #define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
 #define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
 #define REG_ALC			0x2C	/* Auto Level Control settings */
 #define REG_VOFFSET		0x2E	/* V channel offset adjustment */
 #define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
 #define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
 #define REG_BIAS_ADJUST		0x34	/* misc bias settings */

 /* Window parameters */
 #define HWSBASE 0x38
 #define HWEBASE 0x3a
 #define VWSBASE 0x05
 #define VWEBASE 0x05

 struct ov76be {
 	int auto_brt;
 	int auto_exp;
 	int bandfilt;
 	int mirror;
 };

 /* NOTE: These are the same as the 7x10 settings, but should eventually be
  * optimized for the OV76BE */
 static struct ovcamchip_regvals regvals_init_76be[] = {
 	{ 0x10, 0xff },
 	{ 0x16, 0x03 },
 	{ 0x28, 0x24 },
 	{ 0x2b, 0xac },
 	{ 0x12, 0x00 },
 	{ 0x38, 0x81 },
 	{ 0x28, 0x24 },	/* 0c */
 	{ 0x0f, 0x85 },	/* lg's setting */
 	{ 0x15, 0x01 },
 	{ 0x20, 0x1c },
 	{ 0x23, 0x2a },
 	{ 0x24, 0x10 },
 	{ 0x25, 0x8a },
 	{ 0x26, 0xa2 },
 	{ 0x27, 0xc2 },
 	{ 0x2a, 0x04 },
 	{ 0x2c, 0xfe },
 	{ 0x2d, 0x93 },
 	{ 0x30, 0x71 },
 	{ 0x31, 0x60 },
 	{ 0x32, 0x26 },
 	{ 0x33, 0x20 },
 	{ 0x34, 0x48 },
 	{ 0x12, 0x24 },
 	{ 0x11, 0x01 },
 	{ 0x0c, 0x24 },
 	{ 0x0d, 0x24 },
 	{ 0xff, 0xff },	/* END MARKER */
 };

 /* This initializes the OV76be camera chip and relevant variables. */
 static int ov76be_init(struct i2c_client *c)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);
 	struct ov76be *s;
 	int rc;

 	DDEBUG(4, &c->dev, "entered");

 	rc = ov_write_regvals(c, regvals_init_76be);
 	if (rc < 0)
 		return rc;

 	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
 	if (!s)
 		return -ENOMEM;

 	s->auto_brt = 1;
 	s->auto_exp = 1;

 	return rc;
 }

 static int ov76be_free(struct i2c_client *c)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);

 	kfree(ov->spriv);
 	return 0;
 }

 static int ov76be_set_control(struct i2c_client *c,
 			      struct ovcamchip_control *ctl)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);
 	struct ov76be *s = ov->spriv;
 	int rc;
 	int v = ctl->value;

 	switch (ctl->id) {
 	case OVCAMCHIP_CID_BRIGHT:
 		rc = ov_write(c, REG_BRT, v >> 8);
 		break;
 	case OVCAMCHIP_CID_SAT:
 		rc = ov_write(c, REG_SAT, v >> 8);
 		break;
 	case OVCAMCHIP_CID_EXP:
 		rc = ov_write(c, REG_EXP, v);
 		break;
 	case OVCAMCHIP_CID_FREQ:
 	{
 		int sixty = (v == 60);

 		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
 		if (rc < 0)
 			goto out;

 		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
 		if (rc < 0)
 			goto out;

 		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
 		break;
 	}
 	case OVCAMCHIP_CID_BANDFILT:
 		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
 		s->bandfilt = v;
 		break;
 	case OVCAMCHIP_CID_AUTOBRIGHT:
 		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
 		s->auto_brt = v;
 		break;
 	case OVCAMCHIP_CID_AUTOEXP:
 		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
 		s->auto_exp = v;
 		break;
 	case OVCAMCHIP_CID_MIRROR:
 		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
 		s->mirror = v;
 		break;
 	default:
 		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
 		return -EPERM;
 	}

 out:
 	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
 	return rc;
 }

 static int ov76be_get_control(struct i2c_client *c,
 			      struct ovcamchip_control *ctl)
 {
 	struct ovcamchip *ov = i2c_get_clientdata(c);
 	struct ov76be *s = ov->spriv;
 	int rc = 0;
 	unsigned char val = 0;

 	switch (ctl->id) {
 	case OVCAMCHIP_CID_BRIGHT:
 		rc = ov_read(c, REG_BRT, &val);
 		ctl->value = val << 8;
 		break;
 	case OVCAMCHIP_CID_SAT:
 		rc = ov_read(c, REG_SAT, &val);
 		ctl->value = val << 8;
 		break;
 	case OVCAMCHIP_CID_EXP:
 		rc = ov_read(c, REG_EXP, &val);
 		ctl->value = val;
 		break;
 	case OVCAMCHIP_CID_BANDFILT:
 		ctl->value = s->bandfilt;
 		break;
 	case OVCAMCHIP_CID_AUTOBRIGHT:
 		ctl->value = s->auto_brt;
 		break;
 	case OVCAMCHIP_CID_AUTOEXP:
 		ctl->value = s->auto_exp;
 		break;
 	case OVCAMCHIP_CID_MIRROR:
 		ctl->value = s->mirror;
 		break;
 	default:
 		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
 		return -EPERM;
 	}

 	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
 	return rc;
 }

 static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
 {
 	int qvga = win->quarter;

 	/******** QVGA-specific regs ********/

 	ov_write(c, 0x14, qvga?0xa4:0x84);

 	/******** Palette-specific regs ********/

 	if (win->format == VIDEO_PALETTE_GREY) {
 		ov_write_mask(c, 0x0e, 0x40, 0x40);
 		ov_write_mask(c, 0x13, 0x20, 0x20);
 	} else {
 		ov_write_mask(c, 0x0e, 0x00, 0x40);
 		ov_write_mask(c, 0x13, 0x00, 0x20);
 	}

 	/******** Clock programming ********/

 	ov_write(c, 0x11, win->clockdiv);

 	/******** Resolution-specific ********/

 	if (win->width == 640 && win->height == 480)
 		ov_write(c, 0x35, 0x9e);
 	else
 		ov_write(c, 0x35, 0x1e);

 	return 0;
 }

 static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
 {
 	int ret, hwscale, vwscale;

 	ret = ov76be_mode_init(c, win);
 	if (ret < 0)
 		return ret;

 	if (win->quarter) {
 		hwscale = 1;
 		vwscale = 0;
 	} else {
 		hwscale = 2;
 		vwscale = 1;
 	}

 	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
 	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
 	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
 	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));

 	return 0;
 }

 static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
 {
 	switch (cmd) {
 	case OVCAMCHIP_CMD_S_CTRL:
 		return ov76be_set_control(c, arg);
 	case OVCAMCHIP_CMD_G_CTRL:
 		return ov76be_get_control(c, arg);
 	case OVCAMCHIP_CMD_S_MODE:
 		return ov76be_set_window(c, arg);
 	default:
 		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
 		return -ENOIOCTLCMD;
 	}
 }

 struct ovcamchip_ops ov76be_ops = {
 	.init    =	ov76be_init,
 	.free    =	ov76be_free,
 	.command =	ov76be_command,
 };
	/* OmniVision OV76BE Camera Chip Support Code
	*
	* Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
	* http://alpha.dyndns.org/ov511/
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
	*/

	#define DEBUG

	#include <linux/slab.h>
	#include "ovcamchip_priv.h"

	/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
	* for now. */
	#define REG_GAIN 0x00 /* gain [5:0] */
	#define REG_BLUE 0x01 /* blue channel balance */
	#define REG_RED 0x02 /* red channel balance */
	#define REG_SAT 0x03 /* saturation */
	#define REG_CNT 0x05 /* Y contrast */
	#define REG_BRT 0x06 /* Y brightness */
	#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */
	#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */
	#define REG_GAMMA_COEFF 0x0E /* gamma settings */
	#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */
	#define REG_EXP 0x10 /* manual exposure setting */
	#define REG_CLOCK 0x11 /* polarity/clock prescaler */
	#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */
	#define REG_HWIN_START 0x17 /* horizontal window start */
	#define REG_HWIN_END 0x18 /* horizontal window end */
	#define REG_VWIN_START 0x19 /* vertical window start */
	#define REG_VWIN_END 0x1A /* vertical window end */
	#define REG_PIXEL_SHIFT 0x1B /* pixel shift */
	#define REG_YOFFSET 0x21 /* Y channel offset */
	#define REG_UOFFSET 0x22 /* U channel offset */
	#define REG_ECW 0x24 /* exposure white level for AEC */
	#define REG_ECB 0x25 /* exposure black level for AEC */
	#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */
	#define REG_FRAMERATE_L 0x2B /* frame rate LSB */
	#define REG_ALC 0x2C /* Auto Level Control settings */
	#define REG_VOFFSET 0x2E /* V channel offset adjustment */
	#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */
	#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */
	#define REG_BIAS_ADJUST 0x34 /* misc bias settings */

	/* Window parameters */
	#define HWSBASE 0x38
	#define HWEBASE 0x3a
	#define VWSBASE 0x05
	#define VWEBASE 0x05

	struct ov76be {
	int auto_brt;
	int auto_exp;
	int bandfilt;
	int mirror;
	};

	/* NOTE: These are the same as the 7x10 settings, but should eventually be
	* optimized for the OV76BE */
	static struct ovcamchip_regvals regvals_init_76be[] = {
	{ 0x10, 0xff },
	{ 0x16, 0x03 },
	{ 0x28, 0x24 },
	{ 0x2b, 0xac },
	{ 0x12, 0x00 },
	{ 0x38, 0x81 },
	{ 0x28, 0x24 }, /* 0c */
	{ 0x0f, 0x85 }, /* lg's setting */
	{ 0x15, 0x01 },
	{ 0x20, 0x1c },
	{ 0x23, 0x2a },
	{ 0x24, 0x10 },
	{ 0x25, 0x8a },
	{ 0x26, 0xa2 },
	{ 0x27, 0xc2 },
	{ 0x2a, 0x04 },
	{ 0x2c, 0xfe },
	{ 0x2d, 0x93 },
	{ 0x30, 0x71 },
	{ 0x31, 0x60 },
	{ 0x32, 0x26 },
	{ 0x33, 0x20 },
	{ 0x34, 0x48 },
	{ 0x12, 0x24 },
	{ 0x11, 0x01 },
	{ 0x0c, 0x24 },
	{ 0x0d, 0x24 },
	{ 0xff, 0xff }, /* END MARKER */
	};

	/* This initializes the OV76be camera chip and relevant variables. */
	static int ov76be_init(struct i2c_client *c)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);
	struct ov76be *s;
	int rc;

	DDEBUG(4, &c->dev, "entered");

	rc = ov_write_regvals(c, regvals_init_76be);
	if (rc < 0)
	return rc;

	ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
	if (!s)
	return -ENOMEM;

	s->auto_brt = 1;
	s->auto_exp = 1;

	return rc;
	}

	static int ov76be_free(struct i2c_client *c)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);

	kfree(ov->spriv);
	return 0;
	}

	static int ov76be_set_control(struct i2c_client *c,
	struct ovcamchip_control *ctl)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);
	struct ov76be *s = ov->spriv;
	int rc;
	int v = ctl->value;

	switch (ctl->id) {
	case OVCAMCHIP_CID_BRIGHT:
	rc = ov_write(c, REG_BRT, v >> 8);
	break;
	case OVCAMCHIP_CID_SAT:
	rc = ov_write(c, REG_SAT, v >> 8);
	break;
	case OVCAMCHIP_CID_EXP:
	rc = ov_write(c, REG_EXP, v);
	break;
	case OVCAMCHIP_CID_FREQ:
	{
	int sixty = (v == 60);

	rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
	if (rc < 0)
	goto out;

	rc = ov_write(c, 0x2b, sixty?0x00:0xac);
	if (rc < 0)
	goto out;

	rc = ov_write_mask(c, 0x76, 0x01, 0x01);
	break;
	}
	case OVCAMCHIP_CID_BANDFILT:
	rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
	s->bandfilt = v;
	break;
	case OVCAMCHIP_CID_AUTOBRIGHT:
	rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
	s->auto_brt = v;
	break;
	case OVCAMCHIP_CID_AUTOEXP:
	rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
	s->auto_exp = v;
	break;
	case OVCAMCHIP_CID_MIRROR:
	rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
	s->mirror = v;
	break;
	default:
	DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
	return -EPERM;
	}

	out:
	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
	return rc;
	}

	static int ov76be_get_control(struct i2c_client *c,
	struct ovcamchip_control *ctl)
	{
	struct ovcamchip *ov = i2c_get_clientdata(c);
	struct ov76be *s = ov->spriv;
	int rc = 0;
	unsigned char val = 0;

	switch (ctl->id) {
	case OVCAMCHIP_CID_BRIGHT:
	rc = ov_read(c, REG_BRT, &val);
	ctl->value = val << 8;
	break;
	case OVCAMCHIP_CID_SAT:
	rc = ov_read(c, REG_SAT, &val);
	ctl->value = val << 8;
	break;
	case OVCAMCHIP_CID_EXP:
	rc = ov_read(c, REG_EXP, &val);
	ctl->value = val;
	break;
	case OVCAMCHIP_CID_BANDFILT:
	ctl->value = s->bandfilt;
	break;
	case OVCAMCHIP_CID_AUTOBRIGHT:
	ctl->value = s->auto_brt;
	break;
	case OVCAMCHIP_CID_AUTOEXP:
	ctl->value = s->auto_exp;
	break;
	case OVCAMCHIP_CID_MIRROR:
	ctl->value = s->mirror;
	break;
	default:
	DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
	return -EPERM;
	}

	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
	return rc;
	}

	static int ov76be_mode_init(struct i2c_client c, struct ovcamchip_window win)
	{
	int qvga = win->quarter;

	/****** QVGA-specific regs ******/

	ov_write(c, 0x14, qvga?0xa4:0x84);

	/****** Palette-specific regs ******/

	if (win->format == VIDEO_PALETTE_GREY) {
	ov_write_mask(c, 0x0e, 0x40, 0x40);
	ov_write_mask(c, 0x13, 0x20, 0x20);
	} else {
	ov_write_mask(c, 0x0e, 0x00, 0x40);
	ov_write_mask(c, 0x13, 0x00, 0x20);
	}

	/****** Clock programming ******/

	ov_write(c, 0x11, win->clockdiv);

	/****** Resolution-specific ******/

	if (win->width == 640 && win->height == 480)
	ov_write(c, 0x35, 0x9e);
	else
	ov_write(c, 0x35, 0x1e);

	return 0;
	}

	static int ov76be_set_window(struct i2c_client c, struct ovcamchip_window win)
	{
	int ret, hwscale, vwscale;

	ret = ov76be_mode_init(c, win);
	if (ret < 0)
	return ret;

	if (win->quarter) {
	hwscale = 1;
	vwscale = 0;
	} else {
	hwscale = 2;
	vwscale = 1;
	}

	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));

	return 0;
	}

	static int ov76be_command(struct i2c_client c, unsigned int cmd, void arg)
	{
	switch (cmd) {
	case OVCAMCHIP_CMD_S_CTRL:
	return ov76be_set_control(c, arg);
	case OVCAMCHIP_CMD_G_CTRL:
	return ov76be_get_control(c, arg);
	case OVCAMCHIP_CMD_S_MODE:
	return ov76be_set_window(c, arg);
	default:
	DDEBUG(2, &c->dev, "command not supported: %d", cmd);
	return -ENOIOCTLCMD;
	}
	}

	struct ovcamchip_ops ov76be_ops = {
	.init = ov76be_init,
	.free = ov76be_free,
	.command = ov76be_command,
	};