| /* Copyright (c) 2014-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/regmap.h> |
| #include <linux/errno.h> |
| #include <linux/leds.h> |
| #include <linux/slab.h> |
| #include <linux/of_device.h> |
| #include <linux/spmi.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/workqueue.h> |
| #include <linux/power_supply.h> |
| #include <linux/leds-qpnp-flash.h> |
| #include <linux/qpnp/qpnp-adc.h> |
| #include <linux/qpnp/qpnp-revid.h> |
| #include <linux/debugfs.h> |
| #include <linux/uaccess.h> |
| #include "leds.h" |
| |
| #define FLASH_LED_PERIPHERAL_SUBTYPE(base) (base + 0x05) |
| #define FLASH_SAFETY_TIMER(base) (base + 0x40) |
| #define FLASH_MAX_CURRENT(base) (base + 0x41) |
| #define FLASH_LED0_CURRENT(base) (base + 0x42) |
| #define FLASH_LED1_CURRENT(base) (base + 0x43) |
| #define FLASH_CLAMP_CURRENT(base) (base + 0x44) |
| #define FLASH_MODULE_ENABLE_CTRL(base) (base + 0x46) |
| #define FLASH_LED_STROBE_CTRL(base) (base + 0x47) |
| #define FLASH_LED_TMR_CTRL(base) (base + 0x48) |
| #define FLASH_HEADROOM(base) (base + 0x4A) |
| #define FLASH_STARTUP_DELAY(base) (base + 0x4B) |
| #define FLASH_MASK_ENABLE(base) (base + 0x4C) |
| #define FLASH_VREG_OK_FORCE(base) (base + 0x4F) |
| #define FLASH_FAULT_DETECT(base) (base + 0x51) |
| #define FLASH_THERMAL_DRATE(base) (base + 0x52) |
| #define FLASH_CURRENT_RAMP(base) (base + 0x54) |
| #define FLASH_VPH_PWR_DROOP(base) (base + 0x5A) |
| #define FLASH_HDRM_SNS_ENABLE_CTRL0(base) (base + 0x5C) |
| #define FLASH_HDRM_SNS_ENABLE_CTRL1(base) (base + 0x5D) |
| #define FLASH_LED_UNLOCK_SECURE(base) (base + 0xD0) |
| #define FLASH_PERPH_RESET_CTRL(base) (base + 0xDA) |
| #define FLASH_TORCH(base) (base + 0xE4) |
| |
| #define FLASH_STATUS_REG_MASK 0xFF |
| #define FLASH_LED_FAULT_STATUS(base) (base + 0x08) |
| #define INT_LATCHED_STS(base) (base + 0x18) |
| #define IN_POLARITY_HIGH(base) (base + 0x12) |
| #define INT_SET_TYPE(base) (base + 0x11) |
| #define INT_EN_SET(base) (base + 0x15) |
| #define INT_LATCHED_CLR(base) (base + 0x14) |
| |
| #define FLASH_HEADROOM_MASK 0x03 |
| #define FLASH_STARTUP_DLY_MASK 0x03 |
| #define FLASH_VREG_OK_FORCE_MASK 0xC0 |
| #define FLASH_FAULT_DETECT_MASK 0x80 |
| #define FLASH_THERMAL_DERATE_MASK 0xBF |
| #define FLASH_SECURE_MASK 0xFF |
| #define FLASH_TORCH_MASK 0x03 |
| #define FLASH_CURRENT_MASK 0x7F |
| #define FLASH_TMR_MASK 0x03 |
| #define FLASH_TMR_SAFETY 0x00 |
| #define FLASH_SAFETY_TIMER_MASK 0x7F |
| #define FLASH_MODULE_ENABLE_MASK 0xE0 |
| #define FLASH_STROBE_MASK 0xC0 |
| #define FLASH_CURRENT_RAMP_MASK 0xBF |
| #define FLASH_VPH_PWR_DROOP_MASK 0xF3 |
| #define FLASH_LED_HDRM_SNS_ENABLE_MASK 0x81 |
| #define FLASH_MASK_MODULE_CONTRL_MASK 0xE0 |
| #define FLASH_FOLLOW_OTST2_RB_MASK 0x08 |
| |
| #define FLASH_LED_TRIGGER_DEFAULT "none" |
| #define FLASH_LED_HEADROOM_DEFAULT_MV 500 |
| #define FLASH_LED_STARTUP_DELAY_DEFAULT_US 128 |
| #define FLASH_LED_CLAMP_CURRENT_DEFAULT_MA 200 |
| #define FLASH_LED_THERMAL_DERATE_THRESHOLD_DEFAULT_C 80 |
| #define FLASH_LED_RAMP_UP_STEP_DEFAULT_US 3 |
| #define FLASH_LED_RAMP_DN_STEP_DEFAULT_US 3 |
| #define FLASH_LED_VPH_PWR_DROOP_THRESHOLD_DEFAULT_MV 3200 |
| #define FLASH_LED_VPH_PWR_DROOP_DEBOUNCE_TIME_DEFAULT_US 10 |
| #define FLASH_LED_THERMAL_DERATE_RATE_DEFAULT_PERCENT 2 |
| #define FLASH_RAMP_UP_DELAY_US_MIN 1000 |
| #define FLASH_RAMP_UP_DELAY_US_MAX 1001 |
| #define FLASH_RAMP_DN_DELAY_US_MIN 2160 |
| #define FLASH_RAMP_DN_DELAY_US_MAX 2161 |
| #define FLASH_BOOST_REGULATOR_PROBE_DELAY_MS 2000 |
| #define FLASH_TORCH_MAX_LEVEL 0x0F |
| #define FLASH_MAX_LEVEL 0x4F |
| #define FLASH_LED_FLASH_HW_VREG_OK 0x40 |
| #define FLASH_LED_FLASH_SW_VREG_OK 0x80 |
| #define FLASH_LED_STROBE_TYPE_HW 0x04 |
| #define FLASH_DURATION_DIVIDER 10 |
| #define FLASH_LED_HEADROOM_DIVIDER 100 |
| #define FLASH_LED_HEADROOM_OFFSET 2 |
| #define FLASH_LED_MAX_CURRENT_MA 1000 |
| #define FLASH_LED_THERMAL_THRESHOLD_MIN 95 |
| #define FLASH_LED_THERMAL_DEVIDER 10 |
| #define FLASH_LED_VPH_DROOP_THRESHOLD_MIN_MV 2500 |
| #define FLASH_LED_VPH_DROOP_THRESHOLD_DIVIDER 100 |
| #define FLASH_LED_HDRM_SNS_ENABLE 0x81 |
| #define FLASH_LED_HDRM_SNS_DISABLE 0x01 |
| #define FLASH_LED_UA_PER_MA 1000 |
| #define FLASH_LED_MASK_MODULE_MASK2_ENABLE 0x20 |
| #define FLASH_LED_MASK3_ENABLE_SHIFT 7 |
| #define FLASH_LED_MODULE_CTRL_DEFAULT 0x60 |
| #define FLASH_LED_CURRENT_READING_DELAY_MIN 5000 |
| #define FLASH_LED_CURRENT_READING_DELAY_MAX 5001 |
| #define FLASH_LED_OPEN_FAULT_DETECTED 0xC |
| |
| #define FLASH_UNLOCK_SECURE 0xA5 |
| #define FLASH_LED_TORCH_ENABLE 0x00 |
| #define FLASH_LED_TORCH_DISABLE 0x03 |
| #define FLASH_MODULE_ENABLE 0x80 |
| #define FLASH_LED0_TRIGGER 0x80 |
| #define FLASH_LED1_TRIGGER 0x40 |
| #define FLASH_LED0_ENABLEMENT 0x40 |
| #define FLASH_LED1_ENABLEMENT 0x20 |
| #define FLASH_LED_DISABLE 0x00 |
| #define FLASH_LED_MIN_CURRENT_MA 13 |
| #define FLASH_SUBTYPE_DUAL 0x01 |
| #define FLASH_SUBTYPE_SINGLE 0x02 |
| |
| /* |
| * ID represents physical LEDs for individual control purpose. |
| */ |
| enum flash_led_id { |
| FLASH_LED_0 = 0, |
| FLASH_LED_1, |
| FLASH_LED_SWITCH, |
| }; |
| |
| enum flash_led_type { |
| FLASH = 0, |
| TORCH, |
| SWITCH, |
| }; |
| |
| enum thermal_derate_rate { |
| RATE_1_PERCENT = 0, |
| RATE_1P25_PERCENT, |
| RATE_2_PERCENT, |
| RATE_2P5_PERCENT, |
| RATE_5_PERCENT, |
| }; |
| |
| enum current_ramp_steps { |
| RAMP_STEP_0P2_US = 0, |
| RAMP_STEP_0P4_US, |
| RAMP_STEP_0P8_US, |
| RAMP_STEP_1P6_US, |
| RAMP_STEP_3P3_US, |
| RAMP_STEP_6P7_US, |
| RAMP_STEP_13P5_US, |
| RAMP_STEP_27US, |
| }; |
| |
| struct flash_regulator_data { |
| struct regulator *regs; |
| const char *reg_name; |
| u32 max_volt_uv; |
| }; |
| |
| /* |
| * Configurations for each individual LED |
| */ |
| struct flash_node_data { |
| struct platform_device *pdev; |
| struct regmap *regmap; |
| struct led_classdev cdev; |
| struct work_struct work; |
| struct flash_regulator_data *reg_data; |
| u16 max_current; |
| u16 prgm_current; |
| u16 prgm_current2; |
| u16 duration; |
| u8 id; |
| u8 type; |
| u8 trigger; |
| u8 enable; |
| u8 num_regulators; |
| bool flash_on; |
| }; |
| |
| /* |
| * Flash LED configuration read from device tree |
| */ |
| struct flash_led_platform_data { |
| unsigned int temp_threshold_num; |
| unsigned int temp_derate_curr_num; |
| unsigned int *die_temp_derate_curr_ma; |
| unsigned int *die_temp_threshold_degc; |
| u16 ramp_up_step; |
| u16 ramp_dn_step; |
| u16 vph_pwr_droop_threshold; |
| u16 headroom; |
| u16 clamp_current; |
| u8 thermal_derate_threshold; |
| u8 vph_pwr_droop_debounce_time; |
| u8 startup_dly; |
| u8 thermal_derate_rate; |
| bool pmic_charger_support; |
| bool self_check_en; |
| bool thermal_derate_en; |
| bool current_ramp_en; |
| bool vph_pwr_droop_en; |
| bool hdrm_sns_ch0_en; |
| bool hdrm_sns_ch1_en; |
| bool power_detect_en; |
| bool mask3_en; |
| bool follow_rb_disable; |
| bool die_current_derate_en; |
| }; |
| |
| struct qpnp_flash_led_buffer { |
| struct mutex debugfs_lock; /* Prevent thread concurrency */ |
| size_t rpos; |
| size_t wpos; |
| size_t len; |
| struct qpnp_flash_led *led; |
| u32 buffer_cnt; |
| char data[0]; |
| }; |
| |
| /* |
| * Flash LED data structure containing flash LED attributes |
| */ |
| struct qpnp_flash_led { |
| struct pmic_revid_data *revid_data; |
| struct platform_device *pdev; |
| struct regmap *regmap; |
| struct flash_led_platform_data *pdata; |
| struct pinctrl *pinctrl; |
| struct pinctrl_state *gpio_state_active; |
| struct pinctrl_state *gpio_state_suspend; |
| struct flash_node_data *flash_node; |
| struct power_supply *battery_psy; |
| struct workqueue_struct *ordered_workq; |
| struct qpnp_vadc_chip *vadc_dev; |
| struct mutex flash_led_lock; |
| struct dentry *dbgfs_root; |
| int num_leds; |
| u16 base; |
| u16 current_addr; |
| u16 current2_addr; |
| u8 peripheral_type; |
| u8 fault_reg; |
| bool gpio_enabled; |
| bool charging_enabled; |
| bool strobe_debug; |
| bool dbg_feature_en; |
| bool open_fault; |
| }; |
| |
| static u8 qpnp_flash_led_ctrl_dbg_regs[] = { |
| 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, |
| 0x4A, 0x4B, 0x4C, 0x4F, 0x51, 0x52, 0x54, 0x55, 0x5A, 0x5C, 0x5D, |
| }; |
| |
| static int flash_led_dbgfs_file_open(struct qpnp_flash_led *led, |
| struct file *file) |
| { |
| struct qpnp_flash_led_buffer *log; |
| size_t logbufsize = SZ_4K; |
| |
| log = kzalloc(logbufsize, GFP_KERNEL); |
| if (!log) |
| return -ENOMEM; |
| |
| log->rpos = 0; |
| log->wpos = 0; |
| log->len = logbufsize - sizeof(*log); |
| mutex_init(&log->debugfs_lock); |
| log->led = led; |
| |
| log->buffer_cnt = 1; |
| file->private_data = log; |
| |
| return 0; |
| } |
| |
| static int flash_led_dfs_open(struct inode *inode, struct file *file) |
| { |
| struct qpnp_flash_led *led = inode->i_private; |
| |
| return flash_led_dbgfs_file_open(led, file); |
| } |
| |
| static int flash_led_dfs_close(struct inode *inode, struct file *file) |
| { |
| struct qpnp_flash_led_buffer *log = file->private_data; |
| |
| if (log) { |
| file->private_data = NULL; |
| mutex_destroy(&log->debugfs_lock); |
| kfree(log); |
| } |
| |
| return 0; |
| } |
| |
| #define MIN_BUFFER_WRITE_LEN 20 |
| static int print_to_log(struct qpnp_flash_led_buffer *log, |
| const char *fmt, ...) |
| { |
| va_list args; |
| int cnt; |
| char *log_buf; |
| size_t size = log->len - log->wpos; |
| |
| if (size < MIN_BUFFER_WRITE_LEN) |
| return 0; /* not enough buffer left */ |
| |
| log_buf = &log->data[log->wpos]; |
| va_start(args, fmt); |
| cnt = vscnprintf(log_buf, size, fmt, args); |
| va_end(args); |
| |
| log->wpos += cnt; |
| return cnt; |
| } |
| |
| static ssize_t flash_led_dfs_latched_reg_read(struct file *fp, char __user *buf, |
| size_t count, loff_t *ppos) { |
| struct qpnp_flash_led_buffer *log = fp->private_data; |
| struct qpnp_flash_led *led; |
| uint val; |
| int rc = 0; |
| size_t len; |
| size_t ret; |
| |
| if (!log) { |
| pr_err("error: file private data is NULL\n"); |
| return -EFAULT; |
| } |
| led = log->led; |
| |
| mutex_lock(&log->debugfs_lock); |
| if ((log->rpos >= log->wpos && log->buffer_cnt == 0) || |
| ((log->len - log->wpos) < MIN_BUFFER_WRITE_LEN)) |
| goto unlock_mutex; |
| |
| rc = regmap_read(led->regmap, INT_LATCHED_STS(led->base), &val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Unable to read from address %x, rc(%d)\n", |
| INT_LATCHED_STS(led->base), rc); |
| goto unlock_mutex; |
| } |
| log->buffer_cnt--; |
| |
| rc = print_to_log(log, "0x%05X ", INT_LATCHED_STS(led->base)); |
| if (rc == 0) |
| goto unlock_mutex; |
| |
| rc = print_to_log(log, "0x%02X ", val); |
| if (rc == 0) |
| goto unlock_mutex; |
| |
| if (log->wpos > 0 && log->data[log->wpos - 1] == ' ') |
| log->data[log->wpos - 1] = '\n'; |
| |
| len = min(count, log->wpos - log->rpos); |
| |
| ret = copy_to_user(buf, &log->data[log->rpos], len); |
| if (ret) { |
| pr_err("error copy register value to user\n"); |
| rc = -EFAULT; |
| goto unlock_mutex; |
| } |
| |
| len -= ret; |
| *ppos += len; |
| log->rpos += len; |
| |
| rc = len; |
| |
| unlock_mutex: |
| mutex_unlock(&log->debugfs_lock); |
| return rc; |
| } |
| |
| static ssize_t flash_led_dfs_fault_reg_read(struct file *fp, char __user *buf, |
| size_t count, loff_t *ppos) { |
| struct qpnp_flash_led_buffer *log = fp->private_data; |
| struct qpnp_flash_led *led; |
| int rc = 0; |
| size_t len; |
| size_t ret; |
| |
| if (!log) { |
| pr_err("error: file private data is NULL\n"); |
| return -EFAULT; |
| } |
| led = log->led; |
| |
| mutex_lock(&log->debugfs_lock); |
| if ((log->rpos >= log->wpos && log->buffer_cnt == 0) || |
| ((log->len - log->wpos) < MIN_BUFFER_WRITE_LEN)) |
| goto unlock_mutex; |
| |
| log->buffer_cnt--; |
| |
| rc = print_to_log(log, "0x%05X ", FLASH_LED_FAULT_STATUS(led->base)); |
| if (rc == 0) |
| goto unlock_mutex; |
| |
| rc = print_to_log(log, "0x%02X ", led->fault_reg); |
| if (rc == 0) |
| goto unlock_mutex; |
| |
| if (log->wpos > 0 && log->data[log->wpos - 1] == ' ') |
| log->data[log->wpos - 1] = '\n'; |
| |
| len = min(count, log->wpos - log->rpos); |
| |
| ret = copy_to_user(buf, &log->data[log->rpos], len); |
| if (ret) { |
| pr_err("error copy register value to user\n"); |
| rc = -EFAULT; |
| goto unlock_mutex; |
| } |
| |
| len -= ret; |
| *ppos += len; |
| log->rpos += len; |
| |
| rc = len; |
| |
| unlock_mutex: |
| mutex_unlock(&log->debugfs_lock); |
| return rc; |
| } |
| |
| static ssize_t flash_led_dfs_fault_reg_enable(struct file *file, |
| const char __user *buf, size_t count, loff_t *ppos) { |
| |
| u8 *val; |
| int pos = 0; |
| int cnt = 0; |
| int data; |
| size_t ret = 0; |
| |
| struct qpnp_flash_led_buffer *log = file->private_data; |
| struct qpnp_flash_led *led; |
| char *kbuf; |
| |
| if (!log) { |
| pr_err("error: file private data is NULL\n"); |
| return -EFAULT; |
| } |
| led = log->led; |
| |
| mutex_lock(&log->debugfs_lock); |
| kbuf = kmalloc(count + 1, GFP_KERNEL); |
| if (!kbuf) { |
| ret = -ENOMEM; |
| goto unlock_mutex; |
| } |
| |
| ret = copy_from_user(kbuf, buf, count); |
| if (!ret) { |
| pr_err("failed to copy data from user\n"); |
| ret = -EFAULT; |
| goto free_buf; |
| } |
| |
| count -= ret; |
| *ppos += count; |
| kbuf[count] = '\0'; |
| val = kbuf; |
| while (sscanf(kbuf + pos, "%i", &data) == 1) { |
| pos++; |
| val[cnt++] = data & 0xff; |
| } |
| |
| if (!cnt) |
| goto free_buf; |
| |
| ret = count; |
| if (*val == 1) |
| led->strobe_debug = true; |
| else |
| led->strobe_debug = false; |
| |
| free_buf: |
| kfree(kbuf); |
| unlock_mutex: |
| mutex_unlock(&log->debugfs_lock); |
| return ret; |
| } |
| |
| static ssize_t flash_led_dfs_dbg_enable(struct file *file, |
| const char __user *buf, size_t count, loff_t *ppos) { |
| |
| u8 *val; |
| int pos = 0; |
| int cnt = 0; |
| int data; |
| size_t ret = 0; |
| struct qpnp_flash_led_buffer *log = file->private_data; |
| struct qpnp_flash_led *led; |
| char *kbuf; |
| |
| if (!log) { |
| pr_err("error: file private data is NULL\n"); |
| return -EFAULT; |
| } |
| led = log->led; |
| |
| mutex_lock(&log->debugfs_lock); |
| kbuf = kmalloc(count + 1, GFP_KERNEL); |
| if (!kbuf) { |
| ret = -ENOMEM; |
| goto unlock_mutex; |
| } |
| |
| ret = copy_from_user(kbuf, buf, count); |
| if (ret == count) { |
| pr_err("failed to copy data from user\n"); |
| ret = -EFAULT; |
| goto free_buf; |
| } |
| count -= ret; |
| *ppos += count; |
| kbuf[count] = '\0'; |
| val = kbuf; |
| while (sscanf(kbuf + pos, "%i", &data) == 1) { |
| pos++; |
| val[cnt++] = data & 0xff; |
| } |
| |
| if (!cnt) |
| goto free_buf; |
| |
| ret = count; |
| if (*val == 1) |
| led->dbg_feature_en = true; |
| else |
| led->dbg_feature_en = false; |
| |
| free_buf: |
| kfree(kbuf); |
| unlock_mutex: |
| mutex_unlock(&log->debugfs_lock); |
| return ret; |
| } |
| |
| static const struct file_operations flash_led_dfs_latched_reg_fops = { |
| .open = flash_led_dfs_open, |
| .release = flash_led_dfs_close, |
| .read = flash_led_dfs_latched_reg_read, |
| }; |
| |
| static const struct file_operations flash_led_dfs_strobe_reg_fops = { |
| .open = flash_led_dfs_open, |
| .release = flash_led_dfs_close, |
| .read = flash_led_dfs_fault_reg_read, |
| .write = flash_led_dfs_fault_reg_enable, |
| }; |
| |
| static const struct file_operations flash_led_dfs_dbg_feature_fops = { |
| .open = flash_led_dfs_open, |
| .release = flash_led_dfs_close, |
| .write = flash_led_dfs_dbg_enable, |
| }; |
| |
| static int |
| qpnp_led_masked_write(struct qpnp_flash_led *led, u16 addr, u8 mask, u8 val) |
| { |
| int rc; |
| |
| rc = regmap_update_bits(led->regmap, addr, mask, val); |
| if (rc) |
| dev_err(&led->pdev->dev, |
| "Unable to update_bits to addr=%x, rc(%d)\n", addr, rc); |
| |
| dev_dbg(&led->pdev->dev, "Write 0x%02X to addr 0x%02X\n", val, addr); |
| |
| return rc; |
| } |
| |
| static int qpnp_flash_led_get_allowed_die_temp_curr(struct qpnp_flash_led *led, |
| int64_t die_temp_degc) |
| { |
| int die_temp_curr_ma; |
| |
| if (die_temp_degc >= led->pdata->die_temp_threshold_degc[0]) |
| die_temp_curr_ma = 0; |
| else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[1]) |
| die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[0]; |
| else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[2]) |
| die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[1]; |
| else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[3]) |
| die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[2]; |
| else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[4]) |
| die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[3]; |
| else |
| die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[4]; |
| |
| return die_temp_curr_ma; |
| } |
| |
| static int64_t qpnp_flash_led_get_die_temp(struct qpnp_flash_led *led) |
| { |
| struct qpnp_vadc_result die_temp_result; |
| int rc; |
| |
| rc = qpnp_vadc_read(led->vadc_dev, SPARE2, &die_temp_result); |
| if (rc) { |
| pr_err("failed to read the die temp\n"); |
| return -EINVAL; |
| } |
| |
| return die_temp_result.physical; |
| } |
| |
| static int qpnp_get_pmic_revid(struct qpnp_flash_led *led) |
| { |
| struct device_node *revid_dev_node; |
| |
| revid_dev_node = of_parse_phandle(led->pdev->dev.of_node, |
| "qcom,pmic-revid", 0); |
| if (!revid_dev_node) { |
| dev_err(&led->pdev->dev, |
| "qcom,pmic-revid property missing\n"); |
| return -EINVAL; |
| } |
| |
| led->revid_data = get_revid_data(revid_dev_node); |
| if (IS_ERR(led->revid_data)) { |
| pr_err("Couldn't get revid data rc = %ld\n", |
| PTR_ERR(led->revid_data)); |
| return PTR_ERR(led->revid_data); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| qpnp_flash_led_get_max_avail_current(struct flash_node_data *flash_node, |
| struct qpnp_flash_led *led) |
| { |
| union power_supply_propval prop; |
| int64_t chg_temp_milidegc, die_temp_degc; |
| int max_curr_avail_ma = 2000; |
| int allowed_die_temp_curr_ma = 2000; |
| int rc; |
| |
| if (led->pdata->power_detect_en) { |
| if (!led->battery_psy) { |
| dev_err(&led->pdev->dev, |
| "Failed to query power supply\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * When charging is enabled, enforce this new enablement |
| * sequence to reduce fuel gauge reading resolution. |
| */ |
| if (led->charging_enabled) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_MODULE_ENABLE_CTRL(led->base), |
| FLASH_MODULE_ENABLE, FLASH_MODULE_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Module enable reg write failed\n"); |
| return -EINVAL; |
| } |
| |
| usleep_range(FLASH_LED_CURRENT_READING_DELAY_MIN, |
| FLASH_LED_CURRENT_READING_DELAY_MAX); |
| } |
| |
| power_supply_get_property(led->battery_psy, |
| POWER_SUPPLY_PROP_FLASH_CURRENT_MAX, &prop); |
| if (!prop.intval) { |
| dev_err(&led->pdev->dev, |
| "battery too low for flash\n"); |
| return -EINVAL; |
| } |
| |
| max_curr_avail_ma = (prop.intval / FLASH_LED_UA_PER_MA); |
| } |
| |
| /* |
| * When thermal mitigation is available, this logic will execute to |
| * derate current based upon the PMIC die temperature. |
| */ |
| if (led->pdata->die_current_derate_en) { |
| chg_temp_milidegc = qpnp_flash_led_get_die_temp(led); |
| if (chg_temp_milidegc < 0) |
| return -EINVAL; |
| |
| die_temp_degc = div_s64(chg_temp_milidegc, 1000); |
| allowed_die_temp_curr_ma = |
| qpnp_flash_led_get_allowed_die_temp_curr(led, |
| die_temp_degc); |
| if (allowed_die_temp_curr_ma < 0) |
| return -EINVAL; |
| } |
| |
| max_curr_avail_ma = (max_curr_avail_ma >= allowed_die_temp_curr_ma) |
| ? allowed_die_temp_curr_ma : max_curr_avail_ma; |
| |
| return max_curr_avail_ma; |
| } |
| |
| static ssize_t qpnp_flash_led_die_temp_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct qpnp_flash_led *led; |
| struct flash_node_data *flash_node; |
| unsigned long val; |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| ssize_t ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| led = dev_get_drvdata(&flash_node->pdev->dev); |
| |
| /*'0' for disable die_temp feature; non-zero to enable feature*/ |
| if (val == 0) |
| led->pdata->die_current_derate_en = false; |
| else |
| led->pdata->die_current_derate_en = true; |
| |
| return count; |
| } |
| |
| static ssize_t qpnp_led_strobe_type_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct flash_node_data *flash_node; |
| unsigned long state; |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| ssize_t ret = -EINVAL; |
| |
| ret = kstrtoul(buf, 10, &state); |
| if (ret) |
| return ret; |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| |
| /* '0' for sw strobe; '1' for hw strobe */ |
| if (state == 1) |
| flash_node->trigger |= FLASH_LED_STROBE_TYPE_HW; |
| else |
| flash_node->trigger &= ~FLASH_LED_STROBE_TYPE_HW; |
| |
| return count; |
| } |
| |
| static ssize_t qpnp_flash_led_dump_regs_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct qpnp_flash_led *led; |
| struct flash_node_data *flash_node; |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| int rc, i, count = 0; |
| u16 addr; |
| uint val; |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| led = dev_get_drvdata(&flash_node->pdev->dev); |
| for (i = 0; i < ARRAY_SIZE(qpnp_flash_led_ctrl_dbg_regs); i++) { |
| addr = led->base + qpnp_flash_led_ctrl_dbg_regs[i]; |
| rc = regmap_read(led->regmap, addr, &val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Unable to read from addr=%x, rc(%d)\n", |
| addr, rc); |
| return -EINVAL; |
| } |
| |
| count += snprintf(buf + count, PAGE_SIZE - count, |
| "REG_0x%x = 0x%02x\n", addr, val); |
| |
| if (count >= PAGE_SIZE) |
| return PAGE_SIZE - 1; |
| } |
| |
| return count; |
| } |
| |
| static ssize_t qpnp_flash_led_current_derate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct qpnp_flash_led *led; |
| struct flash_node_data *flash_node; |
| unsigned long val; |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| ssize_t ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| led = dev_get_drvdata(&flash_node->pdev->dev); |
| |
| /*'0' for disable derate feature; non-zero to enable derate feature */ |
| if (val == 0) |
| led->pdata->power_detect_en = false; |
| else |
| led->pdata->power_detect_en = true; |
| |
| return count; |
| } |
| |
| static ssize_t qpnp_flash_led_max_current_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct qpnp_flash_led *led; |
| struct flash_node_data *flash_node; |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| int max_curr_avail_ma = 0; |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| led = dev_get_drvdata(&flash_node->pdev->dev); |
| |
| if (led->flash_node[0].flash_on) |
| max_curr_avail_ma += led->flash_node[0].max_current; |
| if (led->flash_node[1].flash_on) |
| max_curr_avail_ma += led->flash_node[1].max_current; |
| |
| if (led->pdata->power_detect_en || |
| led->pdata->die_current_derate_en) { |
| max_curr_avail_ma = |
| qpnp_flash_led_get_max_avail_current(flash_node, led); |
| |
| if (max_curr_avail_ma < 0) |
| return -EINVAL; |
| } |
| |
| return snprintf(buf, PAGE_SIZE, "%u\n", max_curr_avail_ma); |
| } |
| |
| static struct device_attribute qpnp_flash_led_attrs[] = { |
| __ATTR(strobe, 0664, NULL, qpnp_led_strobe_type_store), |
| __ATTR(reg_dump, 0664, qpnp_flash_led_dump_regs_show, NULL), |
| __ATTR(enable_current_derate, 0664, NULL, |
| qpnp_flash_led_current_derate_store), |
| __ATTR(max_allowed_current, 0664, qpnp_flash_led_max_current_show, |
| NULL), |
| __ATTR(enable_die_temp_current_derate, 0664, NULL, |
| qpnp_flash_led_die_temp_store), |
| }; |
| |
| static int qpnp_flash_led_get_thermal_derate_rate(const char *rate) |
| { |
| /* |
| * return 5% derate as default value if user specifies |
| * a value un-supported |
| */ |
| if (strcmp(rate, "1_PERCENT") == 0) |
| return RATE_1_PERCENT; |
| else if (strcmp(rate, "1P25_PERCENT") == 0) |
| return RATE_1P25_PERCENT; |
| else if (strcmp(rate, "2_PERCENT") == 0) |
| return RATE_2_PERCENT; |
| else if (strcmp(rate, "2P5_PERCENT") == 0) |
| return RATE_2P5_PERCENT; |
| else if (strcmp(rate, "5_PERCENT") == 0) |
| return RATE_5_PERCENT; |
| else |
| return RATE_5_PERCENT; |
| } |
| |
| static int qpnp_flash_led_get_ramp_step(const char *step) |
| { |
| /* |
| * return 27 us as default value if user specifies |
| * a value un-supported |
| */ |
| if (strcmp(step, "0P2_US") == 0) |
| return RAMP_STEP_0P2_US; |
| else if (strcmp(step, "0P4_US") == 0) |
| return RAMP_STEP_0P4_US; |
| else if (strcmp(step, "0P8_US") == 0) |
| return RAMP_STEP_0P8_US; |
| else if (strcmp(step, "1P6_US") == 0) |
| return RAMP_STEP_1P6_US; |
| else if (strcmp(step, "3P3_US") == 0) |
| return RAMP_STEP_3P3_US; |
| else if (strcmp(step, "6P7_US") == 0) |
| return RAMP_STEP_6P7_US; |
| else if (strcmp(step, "13P5_US") == 0) |
| return RAMP_STEP_13P5_US; |
| else |
| return RAMP_STEP_27US; |
| } |
| |
| static u8 qpnp_flash_led_get_droop_debounce_time(u8 val) |
| { |
| /* |
| * return 10 us as default value if user specifies |
| * a value un-supported |
| */ |
| switch (val) { |
| case 0: |
| return 0; |
| case 10: |
| return 1; |
| case 32: |
| return 2; |
| case 64: |
| return 3; |
| default: |
| return 1; |
| } |
| } |
| |
| static u8 qpnp_flash_led_get_startup_dly(u8 val) |
| { |
| /* |
| * return 128 us as default value if user specifies |
| * a value un-supported |
| */ |
| switch (val) { |
| case 10: |
| return 0; |
| case 32: |
| return 1; |
| case 64: |
| return 2; |
| case 128: |
| return 3; |
| default: |
| return 3; |
| } |
| } |
| |
| static int |
| qpnp_flash_led_get_peripheral_type(struct qpnp_flash_led *led) |
| { |
| int rc; |
| uint val; |
| |
| rc = regmap_read(led->regmap, |
| FLASH_LED_PERIPHERAL_SUBTYPE(led->base), &val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Unable to read peripheral subtype\n"); |
| return -EINVAL; |
| } |
| |
| return val; |
| } |
| |
| static int qpnp_flash_led_module_disable(struct qpnp_flash_led *led, |
| struct flash_node_data *flash_node) |
| { |
| union power_supply_propval psy_prop; |
| int rc; |
| uint val, tmp; |
| |
| rc = regmap_read(led->regmap, FLASH_LED_STROBE_CTRL(led->base), &val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Unable to read strobe reg\n"); |
| return -EINVAL; |
| } |
| |
| tmp = (~flash_node->trigger) & val; |
| if (!tmp) { |
| if (flash_node->type == TORCH) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_UNLOCK_SECURE(led->base), |
| FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Secure reg write failed\n"); |
| return -EINVAL; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_TORCH(led->base), |
| FLASH_TORCH_MASK, FLASH_LED_TORCH_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Torch reg write failed\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (led->battery_psy && |
| led->revid_data->pmic_subtype == PMI8996_SUBTYPE && |
| !led->revid_data->rev3) { |
| psy_prop.intval = false; |
| rc = power_supply_set_property(led->battery_psy, |
| POWER_SUPPLY_PROP_FLASH_TRIGGER, |
| &psy_prop); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Failed to enble charger i/p current limit\n"); |
| return -EINVAL; |
| } |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_MODULE_ENABLE_CTRL(led->base), |
| FLASH_MODULE_ENABLE_MASK, |
| FLASH_LED_MODULE_CTRL_DEFAULT); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Module disable failed\n"); |
| return -EINVAL; |
| } |
| |
| if (led->pinctrl) { |
| rc = pinctrl_select_state(led->pinctrl, |
| led->gpio_state_suspend); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "failed to disable GPIO\n"); |
| return -EINVAL; |
| } |
| led->gpio_enabled = false; |
| } |
| |
| if (led->battery_psy) { |
| psy_prop.intval = false; |
| rc = power_supply_set_property(led->battery_psy, |
| POWER_SUPPLY_PROP_FLASH_ACTIVE, |
| &psy_prop); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Failed to setup OTG pulse skip enable\n"); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| if (flash_node->trigger & FLASH_LED0_TRIGGER) { |
| rc = qpnp_led_masked_write(led, |
| led->current_addr, |
| FLASH_CURRENT_MASK, 0x00); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "current register write failed\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (flash_node->trigger & FLASH_LED1_TRIGGER) { |
| rc = qpnp_led_masked_write(led, |
| led->current2_addr, |
| FLASH_CURRENT_MASK, 0x00); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "current register write failed\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (flash_node->id == FLASH_LED_SWITCH) |
| flash_node->trigger &= FLASH_LED_STROBE_TYPE_HW; |
| |
| return 0; |
| } |
| |
| static enum |
| led_brightness qpnp_flash_led_brightness_get(struct led_classdev *led_cdev) |
| { |
| return led_cdev->brightness; |
| } |
| |
| static int flash_regulator_parse_dt(struct qpnp_flash_led *led, |
| struct flash_node_data *flash_node) { |
| |
| int i = 0, rc; |
| struct device_node *node = flash_node->cdev.dev->of_node; |
| struct device_node *temp = NULL; |
| const char *temp_string; |
| u32 val; |
| |
| flash_node->reg_data = devm_kzalloc(&led->pdev->dev, |
| sizeof(struct flash_regulator_data *) * |
| flash_node->num_regulators, |
| GFP_KERNEL); |
| if (!flash_node->reg_data) { |
| dev_err(&led->pdev->dev, |
| "Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| for_each_child_of_node(node, temp) { |
| rc = of_property_read_string(temp, "regulator-name", |
| &temp_string); |
| if (!rc) |
| flash_node->reg_data[i].reg_name = temp_string; |
| else { |
| dev_err(&led->pdev->dev, |
| "Unable to read regulator name\n"); |
| return rc; |
| } |
| |
| rc = of_property_read_u32(temp, "max-voltage", &val); |
| if (!rc) { |
| flash_node->reg_data[i].max_volt_uv = val; |
| } else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, |
| "Unable to read max voltage\n"); |
| return rc; |
| } |
| |
| i++; |
| } |
| |
| return 0; |
| } |
| |
| static int flash_regulator_setup(struct qpnp_flash_led *led, |
| struct flash_node_data *flash_node, bool on) |
| { |
| int i, rc = 0; |
| |
| if (on == false) { |
| i = flash_node->num_regulators; |
| goto error_regulator_setup; |
| } |
| |
| for (i = 0; i < flash_node->num_regulators; i++) { |
| flash_node->reg_data[i].regs = |
| regulator_get(flash_node->cdev.dev, |
| flash_node->reg_data[i].reg_name); |
| if (IS_ERR(flash_node->reg_data[i].regs)) { |
| rc = PTR_ERR(flash_node->reg_data[i].regs); |
| dev_err(&led->pdev->dev, |
| "Failed to get regulator\n"); |
| goto error_regulator_setup; |
| } |
| |
| if (regulator_count_voltages(flash_node->reg_data[i].regs) |
| > 0) { |
| rc = regulator_set_voltage(flash_node->reg_data[i].regs, |
| flash_node->reg_data[i].max_volt_uv, |
| flash_node->reg_data[i].max_volt_uv); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "regulator set voltage failed\n"); |
| regulator_put(flash_node->reg_data[i].regs); |
| goto error_regulator_setup; |
| } |
| } |
| } |
| |
| return rc; |
| |
| error_regulator_setup: |
| while (i--) { |
| if (regulator_count_voltages(flash_node->reg_data[i].regs) |
| > 0) { |
| regulator_set_voltage(flash_node->reg_data[i].regs, |
| 0, flash_node->reg_data[i].max_volt_uv); |
| } |
| |
| regulator_put(flash_node->reg_data[i].regs); |
| } |
| |
| return rc; |
| } |
| |
| static int flash_regulator_enable(struct qpnp_flash_led *led, |
| struct flash_node_data *flash_node, bool on) |
| { |
| int i, rc = 0; |
| |
| if (on == false) { |
| i = flash_node->num_regulators; |
| goto error_regulator_enable; |
| } |
| |
| for (i = 0; i < flash_node->num_regulators; i++) { |
| rc = regulator_enable(flash_node->reg_data[i].regs); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "regulator enable failed\n"); |
| goto error_regulator_enable; |
| } |
| } |
| |
| return rc; |
| |
| error_regulator_enable: |
| while (i--) |
| regulator_disable(flash_node->reg_data[i].regs); |
| |
| return rc; |
| } |
| |
| static int qpnp_flash_led_prepare_v1(struct led_trigger *trig, int options, |
| int *max_current) |
| { |
| struct led_classdev *led_cdev = trigger_to_lcdev(trig); |
| struct flash_node_data *flash_node; |
| struct qpnp_flash_led *led; |
| int rc; |
| |
| if (!led_cdev) { |
| pr_err("Invalid led_trigger provided\n"); |
| return -EINVAL; |
| } |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| led = dev_get_drvdata(&flash_node->pdev->dev); |
| |
| if (!(options & FLASH_LED_PREPARE_OPTIONS_MASK)) { |
| dev_err(&led->pdev->dev, "Invalid options %d\n", options); |
| return -EINVAL; |
| } |
| |
| if (options & ENABLE_REGULATOR) { |
| rc = flash_regulator_enable(led, flash_node, true); |
| if (rc < 0) { |
| dev_err(&led->pdev->dev, |
| "enable regulator failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (options & DISABLE_REGULATOR) { |
| rc = flash_regulator_enable(led, flash_node, false); |
| if (rc < 0) { |
| dev_err(&led->pdev->dev, |
| "disable regulator failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (options & QUERY_MAX_CURRENT) { |
| rc = qpnp_flash_led_get_max_avail_current(flash_node, led); |
| if (rc < 0) { |
| dev_err(&led->pdev->dev, |
| "query max current failed, rc=%d\n", rc); |
| return rc; |
| } |
| *max_current = rc; |
| } |
| |
| return 0; |
| } |
| |
| static void qpnp_flash_led_work(struct work_struct *work) |
| { |
| struct flash_node_data *flash_node = container_of(work, |
| struct flash_node_data, work); |
| struct qpnp_flash_led *led = dev_get_drvdata(&flash_node->pdev->dev); |
| union power_supply_propval psy_prop; |
| int rc, brightness = flash_node->cdev.brightness; |
| int max_curr_avail_ma = 0; |
| int total_curr_ma = 0; |
| int i; |
| u8 val = 0; |
| uint temp; |
| |
| mutex_lock(&led->flash_led_lock); |
| |
| if (!brightness) |
| goto turn_off; |
| |
| if (led->open_fault) { |
| dev_err(&led->pdev->dev, "Open fault detected\n"); |
| mutex_unlock(&led->flash_led_lock); |
| return; |
| } |
| |
| if (!flash_node->flash_on && flash_node->num_regulators > 0) { |
| rc = flash_regulator_enable(led, flash_node, true); |
| if (rc) { |
| mutex_unlock(&led->flash_led_lock); |
| return; |
| } |
| } |
| |
| if (!led->gpio_enabled && led->pinctrl) { |
| rc = pinctrl_select_state(led->pinctrl, |
| led->gpio_state_active); |
| if (rc) { |
| dev_err(&led->pdev->dev, "failed to enable GPIO\n"); |
| goto error_enable_gpio; |
| } |
| led->gpio_enabled = true; |
| } |
| |
| if (led->dbg_feature_en) { |
| rc = qpnp_led_masked_write(led, |
| INT_SET_TYPE(led->base), |
| FLASH_STATUS_REG_MASK, 0x1F); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "INT_SET_TYPE write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| IN_POLARITY_HIGH(led->base), |
| FLASH_STATUS_REG_MASK, 0x1F); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "IN_POLARITY_HIGH write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| INT_EN_SET(led->base), |
| FLASH_STATUS_REG_MASK, 0x1F); |
| if (rc) { |
| dev_err(&led->pdev->dev, "INT_EN_SET write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| INT_LATCHED_CLR(led->base), |
| FLASH_STATUS_REG_MASK, 0x1F); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "INT_LATCHED_CLR write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| |
| if (led->flash_node[led->num_leds - 1].id == FLASH_LED_SWITCH && |
| flash_node->id != FLASH_LED_SWITCH) { |
| led->flash_node[led->num_leds - 1].trigger |= |
| (0x80 >> flash_node->id); |
| if (flash_node->id == FLASH_LED_0) |
| led->flash_node[led->num_leds - 1].prgm_current = |
| flash_node->prgm_current; |
| else if (flash_node->id == FLASH_LED_1) |
| led->flash_node[led->num_leds - 1].prgm_current2 = |
| flash_node->prgm_current; |
| } |
| |
| if (flash_node->type == TORCH) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_UNLOCK_SECURE(led->base), |
| FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Secure reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_TORCH(led->base), |
| FLASH_TORCH_MASK, FLASH_LED_TORCH_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Torch reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| if (flash_node->id == FLASH_LED_SWITCH) { |
| val = (u8)(flash_node->prgm_current * |
| FLASH_TORCH_MAX_LEVEL |
| / flash_node->max_current); |
| rc = qpnp_led_masked_write(led, |
| led->current_addr, |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Torch reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| val = (u8)(flash_node->prgm_current2 * |
| FLASH_TORCH_MAX_LEVEL |
| / flash_node->max_current); |
| rc = qpnp_led_masked_write(led, |
| led->current2_addr, |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Torch reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else { |
| val = (u8)(flash_node->prgm_current * |
| FLASH_TORCH_MAX_LEVEL / |
| flash_node->max_current); |
| if (flash_node->id == FLASH_LED_0) { |
| rc = qpnp_led_masked_write(led, |
| led->current_addr, |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "current reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else { |
| rc = qpnp_led_masked_write(led, |
| led->current2_addr, |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "current reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_MAX_CURRENT(led->base), |
| FLASH_CURRENT_MASK, FLASH_TORCH_MAX_LEVEL); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Max current reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_MODULE_ENABLE_CTRL(led->base), |
| FLASH_MODULE_ENABLE_MASK, FLASH_MODULE_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Module enable reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| if (led->pdata->hdrm_sns_ch0_en || |
| led->pdata->hdrm_sns_ch1_en) { |
| if (flash_node->id == FLASH_LED_SWITCH) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL0(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| flash_node->trigger & |
| FLASH_LED0_TRIGGER ? |
| FLASH_LED_HDRM_SNS_ENABLE : |
| FLASH_LED_HDRM_SNS_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense enable failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL1(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| flash_node->trigger & |
| FLASH_LED1_TRIGGER ? |
| FLASH_LED_HDRM_SNS_ENABLE : |
| FLASH_LED_HDRM_SNS_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense enable failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else if (flash_node->id == FLASH_LED_0) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL0(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| FLASH_LED_HDRM_SNS_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense disable failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else if (flash_node->id == FLASH_LED_1) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL1(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| FLASH_LED_HDRM_SNS_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense disable failed\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_STROBE_CTRL(led->base), |
| (flash_node->id == FLASH_LED_SWITCH ? FLASH_STROBE_MASK |
| | FLASH_LED_STROBE_TYPE_HW |
| : flash_node->trigger | |
| FLASH_LED_STROBE_TYPE_HW), |
| flash_node->trigger); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Strobe reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else if (flash_node->type == FLASH) { |
| if (flash_node->trigger & FLASH_LED0_TRIGGER) |
| max_curr_avail_ma += flash_node->max_current; |
| if (flash_node->trigger & FLASH_LED1_TRIGGER) |
| max_curr_avail_ma += flash_node->max_current; |
| |
| psy_prop.intval = true; |
| rc = power_supply_set_property(led->battery_psy, |
| POWER_SUPPLY_PROP_FLASH_ACTIVE, |
| &psy_prop); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Failed to setup OTG pulse skip enable\n"); |
| goto exit_flash_led_work; |
| } |
| |
| if (led->pdata->power_detect_en || |
| led->pdata->die_current_derate_en) { |
| if (led->battery_psy) { |
| power_supply_get_property(led->battery_psy, |
| POWER_SUPPLY_PROP_STATUS, |
| &psy_prop); |
| if (psy_prop.intval < 0) { |
| dev_err(&led->pdev->dev, |
| "Invalid battery status\n"); |
| goto exit_flash_led_work; |
| } |
| |
| if (psy_prop.intval == |
| POWER_SUPPLY_STATUS_CHARGING) |
| led->charging_enabled = true; |
| else if (psy_prop.intval == |
| POWER_SUPPLY_STATUS_DISCHARGING |
| || psy_prop.intval == |
| POWER_SUPPLY_STATUS_NOT_CHARGING) |
| led->charging_enabled = false; |
| } |
| max_curr_avail_ma = |
| qpnp_flash_led_get_max_avail_current |
| (flash_node, led); |
| if (max_curr_avail_ma < 0) { |
| dev_err(&led->pdev->dev, |
| "Failed to get max avail curr\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| |
| if (flash_node->id == FLASH_LED_SWITCH) { |
| if (flash_node->trigger & FLASH_LED0_TRIGGER) |
| total_curr_ma += flash_node->prgm_current; |
| if (flash_node->trigger & FLASH_LED1_TRIGGER) |
| total_curr_ma += flash_node->prgm_current2; |
| |
| if (max_curr_avail_ma < total_curr_ma) { |
| flash_node->prgm_current = |
| (flash_node->prgm_current * |
| max_curr_avail_ma) / total_curr_ma; |
| flash_node->prgm_current2 = |
| (flash_node->prgm_current2 * |
| max_curr_avail_ma) / total_curr_ma; |
| } |
| |
| val = (u8)(flash_node->prgm_current * |
| FLASH_MAX_LEVEL / flash_node->max_current); |
| rc = qpnp_led_masked_write(led, |
| led->current_addr, FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Current register write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| val = (u8)(flash_node->prgm_current2 * |
| FLASH_MAX_LEVEL / flash_node->max_current); |
| rc = qpnp_led_masked_write(led, |
| led->current2_addr, FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Current register write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else { |
| if (max_curr_avail_ma < flash_node->prgm_current) { |
| dev_err(&led->pdev->dev, |
| "battery only supprots %d mA\n", |
| max_curr_avail_ma); |
| flash_node->prgm_current = |
| (u16)max_curr_avail_ma; |
| } |
| |
| val = (u8)(flash_node->prgm_current * |
| FLASH_MAX_LEVEL |
| / flash_node->max_current); |
| if (flash_node->id == FLASH_LED_0) { |
| rc = qpnp_led_masked_write( |
| led, |
| led->current_addr, |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "current reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else if (flash_node->id == FLASH_LED_1) { |
| rc = qpnp_led_masked_write( |
| led, |
| led->current2_addr, |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "current reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| } |
| |
| val = (u8)((flash_node->duration - FLASH_DURATION_DIVIDER) |
| / FLASH_DURATION_DIVIDER); |
| rc = qpnp_led_masked_write(led, |
| FLASH_SAFETY_TIMER(led->base), |
| FLASH_SAFETY_TIMER_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Safety timer reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_MAX_CURRENT(led->base), |
| FLASH_CURRENT_MASK, FLASH_MAX_LEVEL); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Max current reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| if (!led->charging_enabled) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_MODULE_ENABLE_CTRL(led->base), |
| FLASH_MODULE_ENABLE, FLASH_MODULE_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Module enable reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| usleep_range(FLASH_RAMP_UP_DELAY_US_MIN, |
| FLASH_RAMP_UP_DELAY_US_MAX); |
| } |
| |
| if (led->revid_data->pmic_subtype == PMI8996_SUBTYPE && |
| !led->revid_data->rev3) { |
| rc = power_supply_set_property(led->battery_psy, |
| POWER_SUPPLY_PROP_FLASH_TRIGGER, |
| &psy_prop); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Failed to disable charger i/p curr limit\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| |
| if (led->pdata->hdrm_sns_ch0_en || |
| led->pdata->hdrm_sns_ch1_en) { |
| if (flash_node->id == FLASH_LED_SWITCH) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL0(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| (flash_node->trigger & |
| FLASH_LED0_TRIGGER ? |
| FLASH_LED_HDRM_SNS_ENABLE : |
| FLASH_LED_HDRM_SNS_DISABLE)); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense enable failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL1(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| (flash_node->trigger & |
| FLASH_LED1_TRIGGER ? |
| FLASH_LED_HDRM_SNS_ENABLE : |
| FLASH_LED_HDRM_SNS_DISABLE)); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense enable failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else if (flash_node->id == FLASH_LED_0) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL0(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| FLASH_LED_HDRM_SNS_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense disable failed\n"); |
| goto exit_flash_led_work; |
| } |
| } else if (flash_node->id == FLASH_LED_1) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL1(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| FLASH_LED_HDRM_SNS_ENABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense disable failed\n"); |
| goto exit_flash_led_work; |
| } |
| } |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_STROBE_CTRL(led->base), |
| (flash_node->id == FLASH_LED_SWITCH ? FLASH_STROBE_MASK |
| | FLASH_LED_STROBE_TYPE_HW |
| : flash_node->trigger | |
| FLASH_LED_STROBE_TYPE_HW), |
| flash_node->trigger); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Strobe reg write failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| if (led->strobe_debug && led->dbg_feature_en) { |
| udelay(2000); |
| rc = regmap_read(led->regmap, |
| FLASH_LED_FAULT_STATUS(led->base), |
| &temp); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Unable to read from addr= %x, rc(%d)\n", |
| FLASH_LED_FAULT_STATUS(led->base), rc); |
| goto exit_flash_led_work; |
| } |
| led->fault_reg = temp; |
| } |
| } else { |
| pr_err("Both Torch and Flash cannot be select at same time\n"); |
| for (i = 0; i < led->num_leds; i++) |
| led->flash_node[i].flash_on = false; |
| goto turn_off; |
| } |
| |
| flash_node->flash_on = true; |
| mutex_unlock(&led->flash_led_lock); |
| |
| return; |
| |
| turn_off: |
| if (led->flash_node[led->num_leds - 1].id == FLASH_LED_SWITCH && |
| flash_node->id != FLASH_LED_SWITCH) |
| led->flash_node[led->num_leds - 1].trigger &= |
| ~(0x80 >> flash_node->id); |
| if (flash_node->type == TORCH) { |
| /* |
| * Checking LED fault status detects hardware open fault. |
| * If fault occurs, all subsequent LED enablement requests |
| * will be rejected to protect hardware. |
| */ |
| rc = regmap_read(led->regmap, |
| FLASH_LED_FAULT_STATUS(led->base), &temp); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Failed to read out fault status register\n"); |
| goto exit_flash_led_work; |
| } |
| |
| led->open_fault |= (val & FLASH_LED_OPEN_FAULT_DETECTED); |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_STROBE_CTRL(led->base), |
| (flash_node->id == FLASH_LED_SWITCH ? FLASH_STROBE_MASK |
| | FLASH_LED_STROBE_TYPE_HW |
| : flash_node->trigger |
| | FLASH_LED_STROBE_TYPE_HW), |
| FLASH_LED_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Strobe disable failed\n"); |
| goto exit_flash_led_work; |
| } |
| |
| usleep_range(FLASH_RAMP_DN_DELAY_US_MIN, FLASH_RAMP_DN_DELAY_US_MAX); |
| exit_flash_hdrm_sns: |
| if (led->pdata->hdrm_sns_ch0_en) { |
| if (flash_node->id == FLASH_LED_0 || |
| flash_node->id == FLASH_LED_SWITCH) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL0(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| FLASH_LED_HDRM_SNS_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense disable failed\n"); |
| goto exit_flash_hdrm_sns; |
| } |
| } |
| } |
| |
| if (led->pdata->hdrm_sns_ch1_en) { |
| if (flash_node->id == FLASH_LED_1 || |
| flash_node->id == FLASH_LED_SWITCH) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_HDRM_SNS_ENABLE_CTRL1(led->base), |
| FLASH_LED_HDRM_SNS_ENABLE_MASK, |
| FLASH_LED_HDRM_SNS_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Headroom sense disable failed\n"); |
| goto exit_flash_hdrm_sns; |
| } |
| } |
| } |
| exit_flash_led_work: |
| rc = qpnp_flash_led_module_disable(led, flash_node); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Module disable failed\n"); |
| goto exit_flash_led_work; |
| } |
| error_enable_gpio: |
| if (flash_node->flash_on && flash_node->num_regulators > 0) |
| flash_regulator_enable(led, flash_node, false); |
| |
| flash_node->flash_on = false; |
| mutex_unlock(&led->flash_led_lock); |
| } |
| |
| static void qpnp_flash_led_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct flash_node_data *flash_node; |
| struct qpnp_flash_led *led; |
| |
| flash_node = container_of(led_cdev, struct flash_node_data, cdev); |
| led = dev_get_drvdata(&flash_node->pdev->dev); |
| |
| if (value < LED_OFF) { |
| pr_err("Invalid brightness value\n"); |
| return; |
| } |
| |
| if (value > flash_node->cdev.max_brightness) |
| value = flash_node->cdev.max_brightness; |
| |
| flash_node->cdev.brightness = value; |
| if (led->flash_node[led->num_leds - 1].id == |
| FLASH_LED_SWITCH) { |
| if (flash_node->type == TORCH) |
| led->flash_node[led->num_leds - 1].type = TORCH; |
| else if (flash_node->type == FLASH) |
| led->flash_node[led->num_leds - 1].type = FLASH; |
| |
| led->flash_node[led->num_leds - 1].max_current |
| = flash_node->max_current; |
| |
| if (flash_node->id == FLASH_LED_0 || |
| flash_node->id == FLASH_LED_1) { |
| if (value < FLASH_LED_MIN_CURRENT_MA && value != 0) |
| value = FLASH_LED_MIN_CURRENT_MA; |
| |
| flash_node->prgm_current = value; |
| flash_node->flash_on = value ? true : false; |
| } else if (flash_node->id == FLASH_LED_SWITCH) { |
| if (!value) { |
| flash_node->prgm_current = 0; |
| flash_node->prgm_current2 = 0; |
| } |
| } |
| } else { |
| if (value < FLASH_LED_MIN_CURRENT_MA && value != 0) |
| value = FLASH_LED_MIN_CURRENT_MA; |
| flash_node->prgm_current = value; |
| } |
| |
| queue_work(led->ordered_workq, &flash_node->work); |
| } |
| |
| static int qpnp_flash_led_init_settings(struct qpnp_flash_led *led) |
| { |
| int rc; |
| u8 val, temp_val; |
| uint val_int; |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_MODULE_ENABLE_CTRL(led->base), |
| FLASH_MODULE_ENABLE_MASK, |
| FLASH_LED_MODULE_CTRL_DEFAULT); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Module disable failed\n"); |
| return rc; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_STROBE_CTRL(led->base), |
| FLASH_STROBE_MASK, FLASH_LED_DISABLE); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Strobe disable failed\n"); |
| return rc; |
| } |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_TMR_CTRL(led->base), |
| FLASH_TMR_MASK, FLASH_TMR_SAFETY); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "LED timer ctrl reg write failed(%d)\n", rc); |
| return rc; |
| } |
| |
| val = (u8)(led->pdata->headroom / FLASH_LED_HEADROOM_DIVIDER - |
| FLASH_LED_HEADROOM_OFFSET); |
| rc = qpnp_led_masked_write(led, |
| FLASH_HEADROOM(led->base), |
| FLASH_HEADROOM_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Headroom reg write failed\n"); |
| return rc; |
| } |
| |
| val = qpnp_flash_led_get_startup_dly(led->pdata->startup_dly); |
| |
| rc = qpnp_led_masked_write(led, |
| FLASH_STARTUP_DELAY(led->base), |
| FLASH_STARTUP_DLY_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Startup delay reg write failed\n"); |
| return rc; |
| } |
| |
| val = (u8)(led->pdata->clamp_current * FLASH_MAX_LEVEL / |
| FLASH_LED_MAX_CURRENT_MA); |
| rc = qpnp_led_masked_write(led, |
| FLASH_CLAMP_CURRENT(led->base), |
| FLASH_CURRENT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Clamp current reg write failed\n"); |
| return rc; |
| } |
| |
| if (led->pdata->pmic_charger_support) |
| val = FLASH_LED_FLASH_HW_VREG_OK; |
| else |
| val = FLASH_LED_FLASH_SW_VREG_OK; |
| rc = qpnp_led_masked_write(led, |
| FLASH_VREG_OK_FORCE(led->base), |
| FLASH_VREG_OK_FORCE_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "VREG OK force reg write failed\n"); |
| return rc; |
| } |
| |
| if (led->pdata->self_check_en) |
| val = FLASH_MODULE_ENABLE; |
| else |
| val = FLASH_LED_DISABLE; |
| rc = qpnp_led_masked_write(led, |
| FLASH_FAULT_DETECT(led->base), |
| FLASH_FAULT_DETECT_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Fault detect reg write failed\n"); |
| return rc; |
| } |
| |
| val = 0x0; |
| val |= led->pdata->mask3_en << FLASH_LED_MASK3_ENABLE_SHIFT; |
| val |= FLASH_LED_MASK_MODULE_MASK2_ENABLE; |
| rc = qpnp_led_masked_write(led, FLASH_MASK_ENABLE(led->base), |
| FLASH_MASK_MODULE_CONTRL_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Mask module enable failed\n"); |
| return rc; |
| } |
| |
| rc = regmap_read(led->regmap, FLASH_PERPH_RESET_CTRL(led->base), |
| &val_int); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "Unable to read from address %x, rc(%d)\n", |
| FLASH_PERPH_RESET_CTRL(led->base), rc); |
| return -EINVAL; |
| } |
| val = (u8)val_int; |
| |
| if (led->pdata->follow_rb_disable) { |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_UNLOCK_SECURE(led->base), |
| FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Secure reg write failed\n"); |
| return -EINVAL; |
| } |
| |
| val |= FLASH_FOLLOW_OTST2_RB_MASK; |
| rc = qpnp_led_masked_write(led, |
| FLASH_PERPH_RESET_CTRL(led->base), |
| FLASH_FOLLOW_OTST2_RB_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "failed to reset OTST2_RB bit\n"); |
| return rc; |
| } |
| } else { |
| rc = qpnp_led_masked_write(led, |
| FLASH_LED_UNLOCK_SECURE(led->base), |
| FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Secure reg write failed\n"); |
| return -EINVAL; |
| } |
| |
| val &= ~FLASH_FOLLOW_OTST2_RB_MASK; |
| rc = qpnp_led_masked_write(led, |
| FLASH_PERPH_RESET_CTRL(led->base), |
| FLASH_FOLLOW_OTST2_RB_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "failed to reset OTST2_RB bit\n"); |
| return rc; |
| } |
| } |
| |
| if (!led->pdata->thermal_derate_en) |
| val = 0x0; |
| else { |
| val = led->pdata->thermal_derate_en << 7; |
| val |= led->pdata->thermal_derate_rate << 3; |
| val |= (led->pdata->thermal_derate_threshold - |
| FLASH_LED_THERMAL_THRESHOLD_MIN) / |
| FLASH_LED_THERMAL_DEVIDER; |
| } |
| rc = qpnp_led_masked_write(led, |
| FLASH_THERMAL_DRATE(led->base), |
| FLASH_THERMAL_DERATE_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Thermal derate reg write failed\n"); |
| return rc; |
| } |
| |
| if (!led->pdata->current_ramp_en) |
| val = 0x0; |
| else { |
| val = led->pdata->current_ramp_en << 7; |
| val |= led->pdata->ramp_up_step << 3; |
| val |= led->pdata->ramp_dn_step; |
| } |
| rc = qpnp_led_masked_write(led, |
| FLASH_CURRENT_RAMP(led->base), |
| FLASH_CURRENT_RAMP_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "Current ramp reg write failed\n"); |
| return rc; |
| } |
| |
| if (!led->pdata->vph_pwr_droop_en) |
| val = 0x0; |
| else { |
| val = led->pdata->vph_pwr_droop_en << 7; |
| val |= ((led->pdata->vph_pwr_droop_threshold - |
| FLASH_LED_VPH_DROOP_THRESHOLD_MIN_MV) / |
| FLASH_LED_VPH_DROOP_THRESHOLD_DIVIDER) << 4; |
| temp_val = |
| qpnp_flash_led_get_droop_debounce_time( |
| led->pdata->vph_pwr_droop_debounce_time); |
| if (temp_val == 0xFF) { |
| dev_err(&led->pdev->dev, "Invalid debounce time\n"); |
| return temp_val; |
| } |
| |
| val |= temp_val; |
| } |
| rc = qpnp_led_masked_write(led, |
| FLASH_VPH_PWR_DROOP(led->base), |
| FLASH_VPH_PWR_DROOP_MASK, val); |
| if (rc) { |
| dev_err(&led->pdev->dev, "VPH PWR droop reg write failed\n"); |
| return rc; |
| } |
| |
| led->battery_psy = power_supply_get_by_name("battery"); |
| if (!led->battery_psy) { |
| dev_err(&led->pdev->dev, |
| "Failed to get battery power supply\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_flash_led_parse_each_led_dt(struct qpnp_flash_led *led, |
| struct flash_node_data *flash_node) |
| { |
| const char *temp_string; |
| struct device_node *node = flash_node->cdev.dev->of_node; |
| struct device_node *temp = NULL; |
| int rc = 0, num_regs = 0; |
| u32 val; |
| |
| rc = of_property_read_string(node, "label", &temp_string); |
| if (!rc) { |
| if (strcmp(temp_string, "flash") == 0) |
| flash_node->type = FLASH; |
| else if (strcmp(temp_string, "torch") == 0) |
| flash_node->type = TORCH; |
| else if (strcmp(temp_string, "switch") == 0) |
| flash_node->type = SWITCH; |
| else { |
| dev_err(&led->pdev->dev, "Wrong flash LED type\n"); |
| return -EINVAL; |
| } |
| } else if (rc < 0) { |
| dev_err(&led->pdev->dev, "Unable to read flash type\n"); |
| return rc; |
| } |
| |
| rc = of_property_read_u32(node, "qcom,current", &val); |
| if (!rc) { |
| if (val < FLASH_LED_MIN_CURRENT_MA) |
| val = FLASH_LED_MIN_CURRENT_MA; |
| flash_node->prgm_current = val; |
| } else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, "Unable to read current\n"); |
| return rc; |
| } |
| |
| rc = of_property_read_u32(node, "qcom,id", &val); |
| if (!rc) |
| flash_node->id = (u8)val; |
| else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, "Unable to read led ID\n"); |
| return rc; |
| } |
| |
| if (flash_node->type == SWITCH || flash_node->type == FLASH) { |
| rc = of_property_read_u32(node, "qcom,duration", &val); |
| if (!rc) |
| flash_node->duration = (u16)val; |
| else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, "Unable to read duration\n"); |
| return rc; |
| } |
| } |
| |
| switch (led->peripheral_type) { |
| case FLASH_SUBTYPE_SINGLE: |
| flash_node->trigger = FLASH_LED0_TRIGGER; |
| break; |
| case FLASH_SUBTYPE_DUAL: |
| if (flash_node->id == FLASH_LED_0) |
| flash_node->trigger = FLASH_LED0_TRIGGER; |
| else if (flash_node->id == FLASH_LED_1) |
| flash_node->trigger = FLASH_LED1_TRIGGER; |
| break; |
| default: |
| dev_err(&led->pdev->dev, "Invalid peripheral type\n"); |
| } |
| |
| while ((temp = of_get_next_child(node, temp))) { |
| if (of_find_property(temp, "regulator-name", NULL)) |
| num_regs++; |
| } |
| |
| if (num_regs) |
| flash_node->num_regulators = num_regs; |
| |
| return rc; |
| } |
| |
| static int qpnp_flash_led_parse_common_dt( |
| struct qpnp_flash_led *led, |
| struct device_node *node) |
| { |
| int rc; |
| u32 val, temp_val; |
| const char *temp; |
| |
| led->pdata->headroom = FLASH_LED_HEADROOM_DEFAULT_MV; |
| rc = of_property_read_u32(node, "qcom,headroom", &val); |
| if (!rc) |
| led->pdata->headroom = (u16)val; |
| else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, "Unable to read headroom\n"); |
| return rc; |
| } |
| |
| led->pdata->startup_dly = FLASH_LED_STARTUP_DELAY_DEFAULT_US; |
| rc = of_property_read_u32(node, "qcom,startup-dly", &val); |
| if (!rc) |
| led->pdata->startup_dly = (u8)val; |
| else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, "Unable to read startup delay\n"); |
| return rc; |
| } |
| |
| led->pdata->clamp_current = FLASH_LED_CLAMP_CURRENT_DEFAULT_MA; |
| rc = of_property_read_u32(node, "qcom,clamp-current", &val); |
| if (!rc) { |
| if (val < FLASH_LED_MIN_CURRENT_MA) |
| val = FLASH_LED_MIN_CURRENT_MA; |
| led->pdata->clamp_current = (u16)val; |
| } else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, "Unable to read clamp current\n"); |
| return rc; |
| } |
| |
| led->pdata->pmic_charger_support = |
| of_property_read_bool(node, |
| "qcom,pmic-charger-support"); |
| |
| led->pdata->self_check_en = |
| of_property_read_bool(node, "qcom,self-check-enabled"); |
| |
| led->pdata->thermal_derate_en = |
| of_property_read_bool(node, |
| "qcom,thermal-derate-enabled"); |
| |
| if (led->pdata->thermal_derate_en) { |
| led->pdata->thermal_derate_rate = |
| FLASH_LED_THERMAL_DERATE_RATE_DEFAULT_PERCENT; |
| rc = of_property_read_string(node, "qcom,thermal-derate-rate", |
| &temp); |
| if (!rc) { |
| temp_val = |
| qpnp_flash_led_get_thermal_derate_rate(temp); |
| if (temp_val < 0) { |
| dev_err(&led->pdev->dev, |
| "Invalid thermal derate rate\n"); |
| return -EINVAL; |
| } |
| led->pdata->thermal_derate_rate = (u8)temp_val; |
| } else { |
| dev_err(&led->pdev->dev, |
| "Unable to read thermal derate rate\n"); |
| return -EINVAL; |
| } |
| |
| led->pdata->thermal_derate_threshold = |
| FLASH_LED_THERMAL_DERATE_THRESHOLD_DEFAULT_C; |
| rc = of_property_read_u32(node, "qcom,thermal-derate-threshold", |
| &val); |
| if (!rc) |
| led->pdata->thermal_derate_threshold = (u8)val; |
| else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, |
| "Unable to read thermal derate threshold\n"); |
| return rc; |
| } |
| } |
| |
| led->pdata->current_ramp_en = |
| of_property_read_bool(node, |
| "qcom,current-ramp-enabled"); |
| if (led->pdata->current_ramp_en) { |
| led->pdata->ramp_up_step = FLASH_LED_RAMP_UP_STEP_DEFAULT_US; |
| rc = of_property_read_string(node, "qcom,ramp_up_step", &temp); |
| if (!rc) { |
| temp_val = qpnp_flash_led_get_ramp_step(temp); |
| if (temp_val < 0) { |
| dev_err(&led->pdev->dev, |
| "Invalid ramp up step values\n"); |
| return -EINVAL; |
| } |
| led->pdata->ramp_up_step = (u8)temp_val; |
| } else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, |
| "Unable to read ramp up steps\n"); |
| return rc; |
| } |
| |
| led->pdata->ramp_dn_step = FLASH_LED_RAMP_DN_STEP_DEFAULT_US; |
| rc = of_property_read_string(node, "qcom,ramp_dn_step", &temp); |
| if (!rc) { |
| temp_val = qpnp_flash_led_get_ramp_step(temp); |
| if (temp_val < 0) { |
| dev_err(&led->pdev->dev, |
| "Invalid ramp down step values\n"); |
| return rc; |
| } |
| led->pdata->ramp_dn_step = (u8)temp_val; |
| } else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, |
| "Unable to read ramp down steps\n"); |
| return rc; |
| } |
| } |
| |
| led->pdata->vph_pwr_droop_en = of_property_read_bool(node, |
| "qcom,vph-pwr-droop-enabled"); |
| if (led->pdata->vph_pwr_droop_en) { |
| led->pdata->vph_pwr_droop_threshold = |
| FLASH_LED_VPH_PWR_DROOP_THRESHOLD_DEFAULT_MV; |
| rc = of_property_read_u32(node, |
| "qcom,vph-pwr-droop-threshold", &val); |
| if (!rc) { |
| led->pdata->vph_pwr_droop_threshold = (u16)val; |
| } else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, |
| "Unable to read VPH PWR droop threshold\n"); |
| return rc; |
| } |
| |
| led->pdata->vph_pwr_droop_debounce_time = |
| FLASH_LED_VPH_PWR_DROOP_DEBOUNCE_TIME_DEFAULT_US; |
| rc = of_property_read_u32(node, |
| "qcom,vph-pwr-droop-debounce-time", &val); |
| if (!rc) |
| led->pdata->vph_pwr_droop_debounce_time = (u8)val; |
| else if (rc != -EINVAL) { |
| dev_err(&led->pdev->dev, |
| "Unable to read VPH PWR droop debounce time\n"); |
| return rc; |
| } |
| } |
| |
| led->pdata->hdrm_sns_ch0_en = of_property_read_bool(node, |
| "qcom,headroom-sense-ch0-enabled"); |
| |
| led->pdata->hdrm_sns_ch1_en = of_property_read_bool(node, |
| "qcom,headroom-sense-ch1-enabled"); |
| |
| led->pdata->power_detect_en = of_property_read_bool(node, |
| "qcom,power-detect-enabled"); |
| |
| led->pdata->mask3_en = of_property_read_bool(node, |
| "qcom,otst2-module-enabled"); |
| |
| led->pdata->follow_rb_disable = of_property_read_bool(node, |
| "qcom,follow-otst2-rb-disabled"); |
| |
| led->pdata->die_current_derate_en = of_property_read_bool(node, |
| "qcom,die-current-derate-enabled"); |
| |
| if (led->pdata->die_current_derate_en) { |
| led->vadc_dev = qpnp_get_vadc(&led->pdev->dev, "die-temp"); |
| if (IS_ERR(led->vadc_dev)) { |
| pr_err("VADC channel property Missing\n"); |
| return -EINVAL; |
| } |
| |
| if (of_find_property(node, "qcom,die-temp-threshold", |
| &led->pdata->temp_threshold_num)) { |
| if (led->pdata->temp_threshold_num > 0) { |
| led->pdata->die_temp_threshold_degc = |
| devm_kzalloc(&led->pdev->dev, |
| led->pdata->temp_threshold_num, |
| GFP_KERNEL); |
| |
| if (led->pdata->die_temp_threshold_degc |
| == NULL) { |
| dev_err(&led->pdev->dev, |
| "failed to allocate die temp array\n"); |
| return -ENOMEM; |
| } |
| led->pdata->temp_threshold_num /= |
| sizeof(unsigned int); |
| |
| rc = of_property_read_u32_array(node, |
| "qcom,die-temp-threshold", |
| led->pdata->die_temp_threshold_degc, |
| led->pdata->temp_threshold_num); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "couldn't read temp threshold rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| } |
| |
| if (of_find_property(node, "qcom,die-temp-derate-current", |
| &led->pdata->temp_derate_curr_num)) { |
| if (led->pdata->temp_derate_curr_num > 0) { |
| led->pdata->die_temp_derate_curr_ma = |
| devm_kzalloc(&led->pdev->dev, |
| led->pdata->temp_derate_curr_num, |
| GFP_KERNEL); |
| if (led->pdata->die_temp_derate_curr_ma |
| == NULL) { |
| dev_err(&led->pdev->dev, |
| "failed to allocate die derate current array\n"); |
| return -ENOMEM; |
| } |
| led->pdata->temp_derate_curr_num /= |
| sizeof(unsigned int); |
| |
| rc = of_property_read_u32_array(node, |
| "qcom,die-temp-derate-current", |
| led->pdata->die_temp_derate_curr_ma, |
| led->pdata->temp_derate_curr_num); |
| if (rc) { |
| dev_err(&led->pdev->dev, |
| "couldn't read temp limits rc =%d\n", |
| rc); |
| return rc; |
| } |
| } |
| } |
| if (led->pdata->temp_threshold_num != |
| led->pdata->temp_derate_curr_num) { |
| pr_err("Both array size are not same\n"); |
| return -EINVAL; |
| } |
| } |
| |
| led->pinctrl = devm_pinctrl_get(&led->pdev->dev); |
| if (IS_ERR_OR_NULL(led->pinctrl)) { |
| dev_err(&led->pdev->dev, "Unable to acquire pinctrl\n"); |
| led->pinctrl = NULL; |
| return 0; |
| } |
| |
| led->gpio_state_active = pinctrl_lookup_state(led->pinctrl, |
| "flash_led_enable"); |
| if (IS_ERR_OR_NULL(led->gpio_state_active)) { |
| dev_err(&led->pdev->dev, "Cannot lookup LED active state\n"); |
| devm_pinctrl_put(led->pinctrl); |
| led->pinctrl = NULL; |
| return PTR_ERR(led->gpio_state_active); |
| } |
| |
| led->gpio_state_suspend = pinctrl_lookup_state(led->pinctrl, |
| "flash_led_disable"); |
| if (IS_ERR_OR_NULL(led->gpio_state_suspend)) { |
| dev_err(&led->pdev->dev, "Cannot lookup LED disable state\n"); |
| devm_pinctrl_put(led->pinctrl); |
| led->pinctrl = NULL; |
| return PTR_ERR(led->gpio_state_suspend); |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_flash_led_probe(struct platform_device *pdev) |
| { |
| struct qpnp_flash_led *led; |
| unsigned int base; |
| struct device_node *node, *temp; |
| struct dentry *root, *file; |
| int rc, i = 0, j, num_leds = 0; |
| u32 val; |
| |
| root = NULL; |
| node = pdev->dev.of_node; |
| if (node == NULL) { |
| dev_info(&pdev->dev, "No flash device defined\n"); |
| return -ENODEV; |
| } |
| |
| rc = of_property_read_u32(pdev->dev.of_node, "reg", &base); |
| if (rc < 0) { |
| dev_err(&pdev->dev, |
| "Couldn't find reg in node = %s rc = %d\n", |
| pdev->dev.of_node->full_name, rc); |
| return rc; |
| } |
| |
| led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| led->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!led->regmap) { |
| dev_err(&pdev->dev, "Couldn't get parent's regmap\n"); |
| return -EINVAL; |
| } |
| |
| led->base = base; |
| led->pdev = pdev; |
| led->current_addr = FLASH_LED0_CURRENT(led->base); |
| led->current2_addr = FLASH_LED1_CURRENT(led->base); |
| qpnp_flash_led_prepare = qpnp_flash_led_prepare_v1; |
| |
| led->pdata = devm_kzalloc(&pdev->dev, sizeof(*led->pdata), GFP_KERNEL); |
| if (!led->pdata) |
| return -ENOMEM; |
| |
| rc = qpnp_flash_led_get_peripheral_type(led); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "Failed to get peripheral type\n"); |
| return rc; |
| } |
| led->peripheral_type = (u8) rc; |
| |
| rc = qpnp_flash_led_parse_common_dt(led, node); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Failed to get common config for flash LEDs\n"); |
| return rc; |
| } |
| |
| rc = qpnp_flash_led_init_settings(led); |
| if (rc) { |
| dev_err(&pdev->dev, "Failed to initialize flash LED\n"); |
| return rc; |
| } |
| |
| rc = qpnp_get_pmic_revid(led); |
| if (rc) |
| return rc; |
| |
| temp = NULL; |
| while ((temp = of_get_next_child(node, temp))) |
| num_leds++; |
| |
| if (!num_leds) |
| return -ECHILD; |
| |
| led->flash_node = devm_kzalloc(&pdev->dev, |
| (sizeof(struct flash_node_data) * num_leds), |
| GFP_KERNEL); |
| if (!led->flash_node) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| mutex_init(&led->flash_led_lock); |
| |
| led->ordered_workq = alloc_ordered_workqueue("flash_led_workqueue", 0); |
| if (!led->ordered_workq) { |
| dev_err(&pdev->dev, "Failed to allocate ordered workqueue\n"); |
| return -ENOMEM; |
| } |
| |
| for_each_child_of_node(node, temp) { |
| j = -1; |
| led->flash_node[i].cdev.brightness_set = |
| qpnp_flash_led_brightness_set; |
| led->flash_node[i].cdev.brightness_get = |
| qpnp_flash_led_brightness_get; |
| led->flash_node[i].pdev = pdev; |
| |
| INIT_WORK(&led->flash_node[i].work, qpnp_flash_led_work); |
| rc = of_property_read_string(temp, "qcom,led-name", |
| &led->flash_node[i].cdev.name); |
| if (rc < 0) { |
| dev_err(&led->pdev->dev, |
| "Unable to read flash name\n"); |
| return rc; |
| } |
| |
| rc = of_property_read_string(temp, "qcom,default-led-trigger", |
| &led->flash_node[i].cdev.default_trigger); |
| if (rc < 0) { |
| dev_err(&led->pdev->dev, |
| "Unable to read trigger name\n"); |
| return rc; |
| } |
| |
| rc = of_property_read_u32(temp, "qcom,max-current", &val); |
| if (!rc) { |
| if (val < FLASH_LED_MIN_CURRENT_MA) |
| val = FLASH_LED_MIN_CURRENT_MA; |
| led->flash_node[i].max_current = (u16)val; |
| led->flash_node[i].cdev.max_brightness = val; |
| } else { |
| dev_err(&led->pdev->dev, |
| "Unable to read max current\n"); |
| return rc; |
| } |
| rc = led_classdev_register(&pdev->dev, |
| &led->flash_node[i].cdev); |
| if (rc) { |
| dev_err(&pdev->dev, "Unable to register led\n"); |
| goto error_led_register; |
| } |
| |
| led->flash_node[i].cdev.dev->of_node = temp; |
| |
| rc = qpnp_flash_led_parse_each_led_dt(led, &led->flash_node[i]); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Failed to parse config for each LED\n"); |
| goto error_led_register; |
| } |
| |
| if (led->flash_node[i].num_regulators) { |
| rc = flash_regulator_parse_dt(led, &led->flash_node[i]); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Unable to parse regulator data\n"); |
| goto error_led_register; |
| } |
| |
| rc = flash_regulator_setup(led, &led->flash_node[i], |
| true); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Unable to set up regulator\n"); |
| goto error_led_register; |
| } |
| } |
| |
| for (j = 0; j < ARRAY_SIZE(qpnp_flash_led_attrs); j++) { |
| rc = |
| sysfs_create_file(&led->flash_node[i].cdev.dev->kobj, |
| &qpnp_flash_led_attrs[j].attr); |
| if (rc) |
| goto error_led_register; |
| } |
| i++; |
| } |
| |
| led->num_leds = i; |
| |
| root = debugfs_create_dir("flashLED", NULL); |
| if (IS_ERR_OR_NULL(root)) { |
| pr_err("Error creating top level directory err%ld", |
| (long)root); |
| if (PTR_ERR(root) == -ENODEV) |
| pr_err("debugfs is not enabled in kernel"); |
| goto error_free_led_sysfs; |
| } |
| |
| led->dbgfs_root = root; |
| file = debugfs_create_file("enable_debug", 0600, root, led, |
| &flash_led_dfs_dbg_feature_fops); |
| if (!file) { |
| pr_err("error creating 'enable_debug' entry\n"); |
| goto error_led_debugfs; |
| } |
| |
| file = debugfs_create_file("latched", 0600, root, led, |
| &flash_led_dfs_latched_reg_fops); |
| if (!file) { |
| pr_err("error creating 'latched' entry\n"); |
| goto error_led_debugfs; |
| } |
| |
| file = debugfs_create_file("strobe", 0600, root, led, |
| &flash_led_dfs_strobe_reg_fops); |
| if (!file) { |
| pr_err("error creating 'strobe' entry\n"); |
| goto error_led_debugfs; |
| } |
| |
| dev_set_drvdata(&pdev->dev, led); |
| |
| return 0; |
| |
| error_led_debugfs: |
| debugfs_remove_recursive(root); |
| error_free_led_sysfs: |
| i = led->num_leds - 1; |
| j = ARRAY_SIZE(qpnp_flash_led_attrs) - 1; |
| error_led_register: |
| for (; i >= 0; i--) { |
| for (; j >= 0; j--) |
| sysfs_remove_file(&led->flash_node[i].cdev.dev->kobj, |
| &qpnp_flash_led_attrs[j].attr); |
| j = ARRAY_SIZE(qpnp_flash_led_attrs) - 1; |
| led_classdev_unregister(&led->flash_node[i].cdev); |
| } |
| mutex_destroy(&led->flash_led_lock); |
| destroy_workqueue(led->ordered_workq); |
| |
| return rc; |
| } |
| |
| static int qpnp_flash_led_remove(struct platform_device *pdev) |
| { |
| struct qpnp_flash_led *led = dev_get_drvdata(&pdev->dev); |
| int i, j; |
| |
| for (i = led->num_leds - 1; i >= 0; i--) { |
| if (led->flash_node[i].reg_data) { |
| if (led->flash_node[i].flash_on) |
| flash_regulator_enable(led, |
| &led->flash_node[i], false); |
| flash_regulator_setup(led, &led->flash_node[i], |
| false); |
| } |
| for (j = 0; j < ARRAY_SIZE(qpnp_flash_led_attrs); j++) |
| sysfs_remove_file(&led->flash_node[i].cdev.dev->kobj, |
| &qpnp_flash_led_attrs[j].attr); |
| led_classdev_unregister(&led->flash_node[i].cdev); |
| } |
| debugfs_remove_recursive(led->dbgfs_root); |
| mutex_destroy(&led->flash_led_lock); |
| destroy_workqueue(led->ordered_workq); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id spmi_match_table[] = { |
| { .compatible = "qcom,qpnp-flash-led",}, |
| { }, |
| }; |
| |
| static struct platform_driver qpnp_flash_led_driver = { |
| .driver = { |
| .name = "qcom,qpnp-flash-led", |
| .of_match_table = spmi_match_table, |
| }, |
| .probe = qpnp_flash_led_probe, |
| .remove = qpnp_flash_led_remove, |
| }; |
| |
| static int __init qpnp_flash_led_init(void) |
| { |
| return platform_driver_register(&qpnp_flash_led_driver); |
| } |
| late_initcall(qpnp_flash_led_init); |
| |
| static void __exit qpnp_flash_led_exit(void) |
| { |
| platform_driver_unregister(&qpnp_flash_led_driver); |
| } |
| module_exit(qpnp_flash_led_exit); |
| |
| MODULE_DESCRIPTION("QPNP Flash LED driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("leds:leds-qpnp-flash"); |