| /* |
| * KZM-A9-GT board support |
| * |
| * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/pcf857x.h> |
| #include <linux/input.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sh_mmcif.h> |
| #include <linux/mmc/sh_mobile_sdhi.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/platform_device.h> |
| #include <linux/smsc911x.h> |
| #include <linux/usb/r8a66597.h> |
| #include <linux/videodev2.h> |
| #include <sound/sh_fsi.h> |
| #include <sound/simple_card.h> |
| #include <mach/irqs.h> |
| #include <mach/sh73a0.h> |
| #include <mach/common.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <video/sh_mobile_lcdc.h> |
| |
| /* |
| * external GPIO |
| */ |
| #define GPIO_PCF8575_BASE (GPIO_NR) |
| #define GPIO_PCF8575_PORT10 (GPIO_NR + 8) |
| #define GPIO_PCF8575_PORT11 (GPIO_NR + 9) |
| #define GPIO_PCF8575_PORT12 (GPIO_NR + 10) |
| #define GPIO_PCF8575_PORT13 (GPIO_NR + 11) |
| #define GPIO_PCF8575_PORT14 (GPIO_NR + 12) |
| #define GPIO_PCF8575_PORT15 (GPIO_NR + 13) |
| #define GPIO_PCF8575_PORT16 (GPIO_NR + 14) |
| |
| /* |
| * FSI-AK4648 |
| * |
| * this command is required when playback. |
| * |
| * # amixer set "LINEOUT Mixer DACL" on |
| */ |
| |
| /* SMSC 9221 */ |
| static struct resource smsc9221_resources[] = { |
| [0] = { |
| .start = 0x10000000, /* CS4 */ |
| .end = 0x100000ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x260), /* IRQ3 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct smsc911x_platform_config smsc9221_platdata = { |
| .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, |
| .phy_interface = PHY_INTERFACE_MODE_MII, |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| }; |
| |
| static struct platform_device smsc_device = { |
| .name = "smsc911x", |
| .dev = { |
| .platform_data = &smsc9221_platdata, |
| }, |
| .resource = smsc9221_resources, |
| .num_resources = ARRAY_SIZE(smsc9221_resources), |
| }; |
| |
| /* USB external chip */ |
| static struct r8a66597_platdata usb_host_data = { |
| .on_chip = 0, |
| .xtal = R8A66597_PLATDATA_XTAL_48MHZ, |
| }; |
| |
| static struct resource usb_resources[] = { |
| [0] = { |
| .start = 0x10010000, |
| .end = 0x1001ffff - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x220), /* IRQ1 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device usb_host_device = { |
| .name = "r8a66597_hcd", |
| .dev = { |
| .platform_data = &usb_host_data, |
| .dma_mask = NULL, |
| .coherent_dma_mask = 0xffffffff, |
| }, |
| .num_resources = ARRAY_SIZE(usb_resources), |
| .resource = usb_resources, |
| }; |
| |
| /* LCDC */ |
| static struct fb_videomode kzm_lcdc_mode = { |
| .name = "WVGA Panel", |
| .xres = 800, |
| .yres = 480, |
| .left_margin = 220, |
| .right_margin = 110, |
| .hsync_len = 70, |
| .upper_margin = 20, |
| .lower_margin = 5, |
| .vsync_len = 5, |
| .sync = 0, |
| }; |
| |
| static struct sh_mobile_lcdc_info lcdc_info = { |
| .clock_source = LCDC_CLK_BUS, |
| .ch[0] = { |
| .chan = LCDC_CHAN_MAINLCD, |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .interface_type = RGB24, |
| .lcd_modes = &kzm_lcdc_mode, |
| .num_modes = 1, |
| .clock_divider = 5, |
| .flags = 0, |
| .panel_cfg = { |
| .width = 152, |
| .height = 91, |
| }, |
| } |
| }; |
| |
| static struct resource lcdc_resources[] = { |
| [0] = { |
| .name = "LCDC", |
| .start = 0xfe940000, |
| .end = 0xfe943fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x580), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device lcdc_device = { |
| .name = "sh_mobile_lcdc_fb", |
| .num_resources = ARRAY_SIZE(lcdc_resources), |
| .resource = lcdc_resources, |
| .dev = { |
| .platform_data = &lcdc_info, |
| .coherent_dma_mask = ~0, |
| }, |
| }; |
| |
| /* MMCIF */ |
| static struct resource sh_mmcif_resources[] = { |
| [0] = { |
| .name = "MMCIF", |
| .start = 0xe6bd0000, |
| .end = 0xe6bd00ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gic_spi(141), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = gic_spi(140), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mmcif_plat_data sh_mmcif_platdata = { |
| .ocr = MMC_VDD_165_195, |
| .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, |
| }; |
| |
| static struct platform_device mmc_device = { |
| .name = "sh_mmcif", |
| .dev = { |
| .dma_mask = NULL, |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &sh_mmcif_platdata, |
| }, |
| .num_resources = ARRAY_SIZE(sh_mmcif_resources), |
| .resource = sh_mmcif_resources, |
| }; |
| |
| /* SDHI */ |
| static struct sh_mobile_sdhi_info sdhi0_info = { |
| .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, |
| .tmio_caps = MMC_CAP_SD_HIGHSPEED, |
| .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, |
| }; |
| |
| static struct resource sdhi0_resources[] = { |
| [0] = { |
| .name = "SDHI0", |
| .start = 0xee100000, |
| .end = 0xee1000ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, |
| .start = gic_spi(83), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .name = SH_MOBILE_SDHI_IRQ_SDCARD, |
| .start = gic_spi(84), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .name = SH_MOBILE_SDHI_IRQ_SDIO, |
| .start = gic_spi(85), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi0_device = { |
| .name = "sh_mobile_sdhi", |
| .num_resources = ARRAY_SIZE(sdhi0_resources), |
| .resource = sdhi0_resources, |
| .dev = { |
| .platform_data = &sdhi0_info, |
| }, |
| }; |
| |
| /* KEY */ |
| #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } |
| |
| static struct gpio_keys_button gpio_buttons[] = { |
| GPIO_KEY(KEY_BACK, GPIO_PCF8575_PORT10, "SW3"), |
| GPIO_KEY(KEY_RIGHT, GPIO_PCF8575_PORT11, "SW2-R"), |
| GPIO_KEY(KEY_LEFT, GPIO_PCF8575_PORT12, "SW2-L"), |
| GPIO_KEY(KEY_ENTER, GPIO_PCF8575_PORT13, "SW2-P"), |
| GPIO_KEY(KEY_UP, GPIO_PCF8575_PORT14, "SW2-U"), |
| GPIO_KEY(KEY_DOWN, GPIO_PCF8575_PORT15, "SW2-D"), |
| GPIO_KEY(KEY_HOME, GPIO_PCF8575_PORT16, "SW1"), |
| }; |
| |
| static struct gpio_keys_platform_data gpio_key_info = { |
| .buttons = gpio_buttons, |
| .nbuttons = ARRAY_SIZE(gpio_buttons), |
| .poll_interval = 250, /* poling at this point */ |
| }; |
| |
| static struct platform_device gpio_keys_device = { |
| /* gpio-pcf857x.c driver doesn't support gpio_to_irq() */ |
| .name = "gpio-keys-polled", |
| .dev = { |
| .platform_data = &gpio_key_info, |
| }, |
| }; |
| |
| /* FSI-AK4648 */ |
| static struct sh_fsi_platform_info fsi_info = { |
| .port_a = { |
| }, |
| }; |
| |
| static struct resource fsi_resources[] = { |
| [0] = { |
| .name = "FSI", |
| .start = 0xEC230000, |
| .end = 0xEC230400 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gic_spi(146), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device fsi_device = { |
| .name = "sh_fsi2", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(fsi_resources), |
| .resource = fsi_resources, |
| .dev = { |
| .platform_data = &fsi_info, |
| }, |
| }; |
| |
| static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = { |
| .fmt = SND_SOC_DAIFMT_LEFT_J, |
| .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, |
| .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, |
| .sysclk = 11289600, |
| }; |
| |
| static struct asoc_simple_card_info fsi2_ak4648_info = { |
| .name = "AK4648", |
| .card = "FSI2A-AK4648", |
| .cpu_dai = "fsia-dai", |
| .codec = "ak4642-codec.0-0012", |
| .platform = "sh_fsi2", |
| .codec_dai = "ak4642-hifi", |
| .init = &fsi2_ak4648_init_info, |
| }; |
| |
| static struct platform_device fsi_ak4648_device = { |
| .name = "asoc-simple-card", |
| .dev = { |
| .platform_data = &fsi2_ak4648_info, |
| }, |
| }; |
| |
| /* I2C */ |
| static struct pcf857x_platform_data pcf8575_pdata = { |
| .gpio_base = GPIO_PCF8575_BASE, |
| }; |
| |
| static struct i2c_board_info i2c0_devices[] = { |
| { |
| I2C_BOARD_INFO("ak4648", 0x12), |
| }, |
| { |
| I2C_BOARD_INFO("r2025sd", 0x32), |
| } |
| }; |
| |
| static struct i2c_board_info i2c1_devices[] = { |
| { |
| I2C_BOARD_INFO("st1232-ts", 0x55), |
| .irq = intcs_evt2irq(0x300), /* IRQ8 */ |
| }, |
| }; |
| |
| static struct i2c_board_info i2c3_devices[] = { |
| { |
| I2C_BOARD_INFO("pcf8575", 0x20), |
| .platform_data = &pcf8575_pdata, |
| }, |
| }; |
| |
| static struct platform_device *kzm_devices[] __initdata = { |
| &smsc_device, |
| &usb_host_device, |
| &lcdc_device, |
| &mmc_device, |
| &sdhi0_device, |
| &gpio_keys_device, |
| &fsi_device, |
| &fsi_ak4648_device, |
| }; |
| |
| /* |
| * FIXME |
| * |
| * This is quick hack for enabling LCDC backlight |
| */ |
| static int __init as3711_enable_lcdc_backlight(void) |
| { |
| struct i2c_adapter *a = i2c_get_adapter(0); |
| struct i2c_msg msg; |
| int i, ret; |
| __u8 magic[] = { |
| 0x40, 0x2a, |
| 0x43, 0x3c, |
| 0x44, 0x3c, |
| 0x45, 0x3c, |
| 0x54, 0x03, |
| 0x51, 0x00, |
| 0x51, 0x01, |
| 0xff, 0x00, /* wait */ |
| 0x43, 0xf0, |
| 0x44, 0xf0, |
| 0x45, 0xf0, |
| }; |
| |
| if (!machine_is_kzm9g()) |
| return 0; |
| |
| if (!a) |
| return 0; |
| |
| msg.addr = 0x40; |
| msg.len = 2; |
| msg.flags = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(magic); i += 2) { |
| msg.buf = magic + i; |
| |
| if (0xff == msg.buf[0]) { |
| udelay(500); |
| continue; |
| } |
| |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret < 0) { |
| pr_err("i2c transfer fail\n"); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| device_initcall(as3711_enable_lcdc_backlight); |
| |
| static void __init kzm_init(void) |
| { |
| sh73a0_pinmux_init(); |
| |
| /* enable SCIFA4 */ |
| gpio_request(GPIO_FN_SCIFA4_TXD, NULL); |
| gpio_request(GPIO_FN_SCIFA4_RXD, NULL); |
| gpio_request(GPIO_FN_SCIFA4_RTS_, NULL); |
| gpio_request(GPIO_FN_SCIFA4_CTS_, NULL); |
| |
| /* CS4 for SMSC/USB */ |
| gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */ |
| |
| /* SMSC */ |
| gpio_request(GPIO_PORT224, NULL); /* IRQ3 */ |
| gpio_direction_input(GPIO_PORT224); |
| |
| /* LCDC */ |
| gpio_request(GPIO_FN_LCDD23, NULL); |
| gpio_request(GPIO_FN_LCDD22, NULL); |
| gpio_request(GPIO_FN_LCDD21, NULL); |
| gpio_request(GPIO_FN_LCDD20, NULL); |
| gpio_request(GPIO_FN_LCDD19, NULL); |
| gpio_request(GPIO_FN_LCDD18, NULL); |
| gpio_request(GPIO_FN_LCDD17, NULL); |
| gpio_request(GPIO_FN_LCDD16, NULL); |
| gpio_request(GPIO_FN_LCDD15, NULL); |
| gpio_request(GPIO_FN_LCDD14, NULL); |
| gpio_request(GPIO_FN_LCDD13, NULL); |
| gpio_request(GPIO_FN_LCDD12, NULL); |
| gpio_request(GPIO_FN_LCDD11, NULL); |
| gpio_request(GPIO_FN_LCDD10, NULL); |
| gpio_request(GPIO_FN_LCDD9, NULL); |
| gpio_request(GPIO_FN_LCDD8, NULL); |
| gpio_request(GPIO_FN_LCDD7, NULL); |
| gpio_request(GPIO_FN_LCDD6, NULL); |
| gpio_request(GPIO_FN_LCDD5, NULL); |
| gpio_request(GPIO_FN_LCDD4, NULL); |
| gpio_request(GPIO_FN_LCDD3, NULL); |
| gpio_request(GPIO_FN_LCDD2, NULL); |
| gpio_request(GPIO_FN_LCDD1, NULL); |
| gpio_request(GPIO_FN_LCDD0, NULL); |
| gpio_request(GPIO_FN_LCDDISP, NULL); |
| gpio_request(GPIO_FN_LCDDCK, NULL); |
| |
| gpio_request(GPIO_PORT222, NULL); /* LCDCDON */ |
| gpio_request(GPIO_PORT226, NULL); /* SC */ |
| gpio_direction_output(GPIO_PORT222, 1); |
| gpio_direction_output(GPIO_PORT226, 1); |
| |
| /* Touchscreen */ |
| gpio_request(GPIO_PORT223, NULL); /* IRQ8 */ |
| gpio_direction_input(GPIO_PORT223); |
| |
| /* enable MMCIF */ |
| gpio_request(GPIO_FN_MMCCLK0, NULL); |
| gpio_request(GPIO_FN_MMCCMD0_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_0_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_1_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_2_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_3_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_4_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_5_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_6_PU, NULL); |
| gpio_request(GPIO_FN_MMCD0_7_PU, NULL); |
| |
| /* enable SD */ |
| gpio_request(GPIO_FN_SDHIWP0, NULL); |
| gpio_request(GPIO_FN_SDHICD0, NULL); |
| gpio_request(GPIO_FN_SDHICMD0, NULL); |
| gpio_request(GPIO_FN_SDHICLK0, NULL); |
| gpio_request(GPIO_FN_SDHID0_3, NULL); |
| gpio_request(GPIO_FN_SDHID0_2, NULL); |
| gpio_request(GPIO_FN_SDHID0_1, NULL); |
| gpio_request(GPIO_FN_SDHID0_0, NULL); |
| gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); |
| gpio_request(GPIO_PORT15, NULL); |
| gpio_direction_output(GPIO_PORT15, 1); /* power */ |
| |
| /* I2C 3 */ |
| gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); |
| gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); |
| |
| /* enable FSI2 port A (ak4648) */ |
| gpio_request(GPIO_FN_FSIACK, NULL); |
| gpio_request(GPIO_FN_FSIAILR, NULL); |
| gpio_request(GPIO_FN_FSIAIBT, NULL); |
| gpio_request(GPIO_FN_FSIAISLD, NULL); |
| gpio_request(GPIO_FN_FSIAOSLD, NULL); |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| /* Early BRESP enable, Shared attribute override enable, 64K*8way */ |
| l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); |
| #endif |
| |
| i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); |
| i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); |
| i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices)); |
| |
| sh73a0_add_standard_devices(); |
| platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices)); |
| } |
| |
| static const char *kzm9g_boards_compat_dt[] __initdata = { |
| "renesas,kzm9g", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(KZM9G_DT, "kzm9g") |
| .map_io = sh73a0_map_io, |
| .init_early = sh73a0_add_early_devices, |
| .nr_irqs = NR_IRQS_LEGACY, |
| .init_irq = sh73a0_init_irq, |
| .handle_irq = gic_handle_irq, |
| .init_machine = kzm_init, |
| .init_late = shmobile_init_late, |
| .timer = &shmobile_timer, |
| .dt_compat = kzm9g_boards_compat_dt, |
| MACHINE_END |