| /* |
| * Regulator driver for National Semiconductors LP3971 PMIC chip |
| * |
| * Copyright (C) 2009 Samsung Electronics |
| * Author: Marek Szyprowski <m.szyprowski@samsung.com> |
| * |
| * Based on wm8350.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/bug.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/lp3971.h> |
| #include <linux/slab.h> |
| |
| struct lp3971 { |
| struct device *dev; |
| struct mutex io_lock; |
| struct i2c_client *i2c; |
| }; |
| |
| static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg); |
| static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val); |
| |
| #define LP3971_SYS_CONTROL1_REG 0x07 |
| |
| /* System control register 1 initial value, |
| bits 4 and 5 are EPROM programmable */ |
| #define SYS_CONTROL1_INIT_VAL 0x40 |
| #define SYS_CONTROL1_INIT_MASK 0xCF |
| |
| #define LP3971_BUCK_VOL_ENABLE_REG 0x10 |
| #define LP3971_BUCK_VOL_CHANGE_REG 0x20 |
| |
| /* Voltage control registers shift: |
| LP3971_BUCK1 -> 0 |
| LP3971_BUCK2 -> 4 |
| LP3971_BUCK3 -> 6 |
| */ |
| #define BUCK_VOL_CHANGE_SHIFT(x) (((!!x) << 2) | (x & ~0x01)) |
| #define BUCK_VOL_CHANGE_FLAG_GO 0x01 |
| #define BUCK_VOL_CHANGE_FLAG_TARGET 0x02 |
| #define BUCK_VOL_CHANGE_FLAG_MASK 0x03 |
| |
| #define LP3971_BUCK1_BASE 0x23 |
| #define LP3971_BUCK2_BASE 0x29 |
| #define LP3971_BUCK3_BASE 0x32 |
| |
| static const int buck_base_addr[] = { |
| LP3971_BUCK1_BASE, |
| LP3971_BUCK2_BASE, |
| LP3971_BUCK3_BASE, |
| }; |
| |
| #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x]) |
| #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1) |
| |
| static const unsigned int buck_voltage_map[] = { |
| 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, |
| 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, |
| 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000, |
| 3000000, 3300000, |
| }; |
| |
| #define BUCK_TARGET_VOL_MASK 0x3f |
| |
| #define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2) |
| |
| #define LP3971_LDO_ENABLE_REG 0x12 |
| #define LP3971_LDO_VOL_CONTR_BASE 0x39 |
| |
| /* Voltage control registers: |
| LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0 |
| LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0 |
| LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1 |
| LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1 |
| LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2 |
| */ |
| #define LP3971_LDO_VOL_CONTR_REG(x) (LP3971_LDO_VOL_CONTR_BASE + (x >> 1)) |
| |
| /* Voltage control registers shift: |
| LP3971_LDO1 -> 0, LP3971_LDO2 -> 4 |
| LP3971_LDO3 -> 0, LP3971_LDO4 -> 4 |
| LP3971_LDO5 -> 0 |
| */ |
| #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2) |
| #define LDO_VOL_CONTR_MASK 0x0f |
| |
| static const unsigned int ldo45_voltage_map[] = { |
| 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000, |
| 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000, |
| }; |
| |
| static const unsigned int ldo123_voltage_map[] = { |
| 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, |
| 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, |
| }; |
| |
| #define LDO_VOL_MIN_IDX 0x00 |
| #define LDO_VOL_MAX_IDX 0x0f |
| |
| static int lp3971_ldo_is_enabled(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int ldo = rdev_get_id(dev) - LP3971_LDO1; |
| u16 mask = 1 << (1 + ldo); |
| u16 val; |
| |
| val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG); |
| return (val & mask) != 0; |
| } |
| |
| static int lp3971_ldo_enable(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int ldo = rdev_get_id(dev) - LP3971_LDO1; |
| u16 mask = 1 << (1 + ldo); |
| |
| return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask); |
| } |
| |
| static int lp3971_ldo_disable(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int ldo = rdev_get_id(dev) - LP3971_LDO1; |
| u16 mask = 1 << (1 + ldo); |
| |
| return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0); |
| } |
| |
| static int lp3971_ldo_get_voltage_sel(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int ldo = rdev_get_id(dev) - LP3971_LDO1; |
| u16 val, reg; |
| |
| reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo)); |
| val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK; |
| |
| return val; |
| } |
| |
| static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev, |
| unsigned int selector) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int ldo = rdev_get_id(dev) - LP3971_LDO1; |
| |
| return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo), |
| LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), |
| selector << LDO_VOL_CONTR_SHIFT(ldo)); |
| } |
| |
| static struct regulator_ops lp3971_ldo_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .is_enabled = lp3971_ldo_is_enabled, |
| .enable = lp3971_ldo_enable, |
| .disable = lp3971_ldo_disable, |
| .get_voltage_sel = lp3971_ldo_get_voltage_sel, |
| .set_voltage_sel = lp3971_ldo_set_voltage_sel, |
| }; |
| |
| static int lp3971_dcdc_is_enabled(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int buck = rdev_get_id(dev) - LP3971_DCDC1; |
| u16 mask = 1 << (buck * 2); |
| u16 val; |
| |
| val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG); |
| return (val & mask) != 0; |
| } |
| |
| static int lp3971_dcdc_enable(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int buck = rdev_get_id(dev) - LP3971_DCDC1; |
| u16 mask = 1 << (buck * 2); |
| |
| return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask); |
| } |
| |
| static int lp3971_dcdc_disable(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int buck = rdev_get_id(dev) - LP3971_DCDC1; |
| u16 mask = 1 << (buck * 2); |
| |
| return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0); |
| } |
| |
| static int lp3971_dcdc_get_voltage_sel(struct regulator_dev *dev) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int buck = rdev_get_id(dev) - LP3971_DCDC1; |
| u16 reg; |
| |
| reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck)); |
| reg &= BUCK_TARGET_VOL_MASK; |
| |
| return reg; |
| } |
| |
| static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev, |
| unsigned int selector) |
| { |
| struct lp3971 *lp3971 = rdev_get_drvdata(dev); |
| int buck = rdev_get_id(dev) - LP3971_DCDC1; |
| int ret; |
| |
| ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck), |
| BUCK_TARGET_VOL_MASK, selector); |
| if (ret) |
| return ret; |
| |
| ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG, |
| BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck), |
| BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck)); |
| if (ret) |
| return ret; |
| |
| return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG, |
| BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck), |
| 0 << BUCK_VOL_CHANGE_SHIFT(buck)); |
| } |
| |
| static struct regulator_ops lp3971_dcdc_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .is_enabled = lp3971_dcdc_is_enabled, |
| .enable = lp3971_dcdc_enable, |
| .disable = lp3971_dcdc_disable, |
| .get_voltage_sel = lp3971_dcdc_get_voltage_sel, |
| .set_voltage_sel = lp3971_dcdc_set_voltage_sel, |
| }; |
| |
| static const struct regulator_desc regulators[] = { |
| { |
| .name = "LDO1", |
| .id = LP3971_LDO1, |
| .ops = &lp3971_ldo_ops, |
| .n_voltages = ARRAY_SIZE(ldo123_voltage_map), |
| .volt_table = ldo123_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO2", |
| .id = LP3971_LDO2, |
| .ops = &lp3971_ldo_ops, |
| .n_voltages = ARRAY_SIZE(ldo123_voltage_map), |
| .volt_table = ldo123_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO3", |
| .id = LP3971_LDO3, |
| .ops = &lp3971_ldo_ops, |
| .n_voltages = ARRAY_SIZE(ldo123_voltage_map), |
| .volt_table = ldo123_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO4", |
| .id = LP3971_LDO4, |
| .ops = &lp3971_ldo_ops, |
| .n_voltages = ARRAY_SIZE(ldo45_voltage_map), |
| .volt_table = ldo45_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO5", |
| .id = LP3971_LDO5, |
| .ops = &lp3971_ldo_ops, |
| .n_voltages = ARRAY_SIZE(ldo45_voltage_map), |
| .volt_table = ldo45_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC1", |
| .id = LP3971_DCDC1, |
| .ops = &lp3971_dcdc_ops, |
| .n_voltages = ARRAY_SIZE(buck_voltage_map), |
| .volt_table = buck_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC2", |
| .id = LP3971_DCDC2, |
| .ops = &lp3971_dcdc_ops, |
| .n_voltages = ARRAY_SIZE(buck_voltage_map), |
| .volt_table = buck_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC3", |
| .id = LP3971_DCDC3, |
| .ops = &lp3971_dcdc_ops, |
| .n_voltages = ARRAY_SIZE(buck_voltage_map), |
| .volt_table = buck_voltage_map, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count, |
| u16 *dest) |
| { |
| int ret; |
| |
| if (count != 1) |
| return -EIO; |
| ret = i2c_smbus_read_byte_data(i2c, reg); |
| if (ret < 0) |
| return ret; |
| |
| *dest = ret; |
| return 0; |
| } |
| |
| static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count, |
| const u16 *src) |
| { |
| if (count != 1) |
| return -EIO; |
| return i2c_smbus_write_byte_data(i2c, reg, *src); |
| } |
| |
| static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg) |
| { |
| u16 val = 0; |
| |
| mutex_lock(&lp3971->io_lock); |
| |
| lp3971_i2c_read(lp3971->i2c, reg, 1, &val); |
| |
| dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, |
| (unsigned)val&0xff); |
| |
| mutex_unlock(&lp3971->io_lock); |
| |
| return val & 0xff; |
| } |
| |
| static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val) |
| { |
| u16 tmp; |
| int ret; |
| |
| mutex_lock(&lp3971->io_lock); |
| |
| ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp); |
| tmp = (tmp & ~mask) | val; |
| if (ret == 0) { |
| ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp); |
| dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, |
| (unsigned)val&0xff); |
| } |
| mutex_unlock(&lp3971->io_lock); |
| |
| return ret; |
| } |
| |
| static int setup_regulators(struct lp3971 *lp3971, |
| struct lp3971_platform_data *pdata) |
| { |
| int i, err; |
| |
| /* Instantiate the regulators */ |
| for (i = 0; i < pdata->num_regulators; i++) { |
| struct regulator_config config = { }; |
| struct lp3971_regulator_subdev *reg = &pdata->regulators[i]; |
| struct regulator_dev *rdev; |
| |
| config.dev = lp3971->dev; |
| config.init_data = reg->initdata; |
| config.driver_data = lp3971; |
| |
| rdev = devm_regulator_register(lp3971->dev, |
| ®ulators[reg->id], &config); |
| if (IS_ERR(rdev)) { |
| err = PTR_ERR(rdev); |
| dev_err(lp3971->dev, "regulator init failed: %d\n", |
| err); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int lp3971_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct lp3971 *lp3971; |
| struct lp3971_platform_data *pdata = dev_get_platdata(&i2c->dev); |
| int ret; |
| u16 val; |
| |
| if (!pdata) { |
| dev_dbg(&i2c->dev, "No platform init data supplied\n"); |
| return -ENODEV; |
| } |
| |
| lp3971 = devm_kzalloc(&i2c->dev, sizeof(struct lp3971), GFP_KERNEL); |
| if (lp3971 == NULL) |
| return -ENOMEM; |
| |
| lp3971->i2c = i2c; |
| lp3971->dev = &i2c->dev; |
| |
| mutex_init(&lp3971->io_lock); |
| |
| /* Detect LP3971 */ |
| ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val); |
| if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) |
| ret = -ENODEV; |
| if (ret < 0) { |
| dev_err(&i2c->dev, "failed to detect device\n"); |
| return ret; |
| } |
| |
| ret = setup_regulators(lp3971, pdata); |
| if (ret < 0) |
| return ret; |
| |
| i2c_set_clientdata(i2c, lp3971); |
| return 0; |
| } |
| |
| static const struct i2c_device_id lp3971_i2c_id[] = { |
| { "lp3971", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id); |
| |
| static struct i2c_driver lp3971_i2c_driver = { |
| .driver = { |
| .name = "LP3971", |
| }, |
| .probe = lp3971_i2c_probe, |
| .id_table = lp3971_i2c_id, |
| }; |
| |
| module_i2c_driver(lp3971_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>"); |
| MODULE_DESCRIPTION("LP3971 PMIC driver"); |