MIPS: BCM63XX: Use pr_* instead of printk
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Joe Perches <joe@perches.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11300/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 33727e7..b2097c0 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -7,6 +7,8 @@
* Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -31,7 +33,6 @@
#include <uapi/linux/bcm933xx_hcs.h>
-#define PFX "board_bcm963xx: "
#define HCS_OFFSET_128K 0x20000
@@ -740,7 +741,7 @@
memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
return 0;
} else {
- printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+ pr_err("unable to fill SPROM for given bustype\n");
return -EINVAL;
}
}
@@ -784,7 +785,7 @@
cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
else
strcpy(cfe_version, "unknown");
- printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+ pr_info("CFE version: %s\n", cfe_version);
bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
@@ -808,8 +809,7 @@
char name[17];
memcpy(name, board_name, 16);
name[16] = 0;
- printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
- name);
+ pr_err("unknown bcm963xx board: %s\n", name);
return;
}
@@ -854,7 +854,7 @@
{
if (!board.name[0])
panic("unable to detect bcm963xx board");
- printk(KERN_INFO PFX "board name: %s\n", board.name);
+ pr_info("board name: %s\n", board.name);
/* make sure we're running on expected cpu */
if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
@@ -910,7 +910,7 @@
memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
if (ssb_arch_register_fallback_sprom(
&bcm63xx_get_fallback_sprom) < 0)
- pr_err(PFX "failed to register fallback SPROM\n");
+ pr_err("failed to register fallback SPROM\n");
}
#endif
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 307ec8b..1c7c3fb 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -376,10 +376,10 @@
bcm63xx_cpu_freq = detect_cpu_clock();
bcm63xx_memory_size = detect_memory_size();
- printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
- bcm63xx_cpu_id, bcm63xx_cpu_rev);
- printk(KERN_INFO "CPU frequency is %u MHz\n",
- bcm63xx_cpu_freq / 1000000);
- printk(KERN_INFO "%uMB of RAM installed\n",
- bcm63xx_memory_size >> 20);
+ pr_info("Detected Broadcom 0x%04x CPU revision %02x\n",
+ bcm63xx_cpu_id, bcm63xx_cpu_rev);
+ pr_info("CPU frequency is %u MHz\n",
+ bcm63xx_cpu_freq / 1000000);
+ pr_info("%uMB of RAM installed\n",
+ bcm63xx_memory_size >> 20);
}
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
index a551bab..9496cd2 100644
--- a/arch/mips/bcm63xx/dev-pcmcia.c
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -139,6 +139,6 @@
return platform_device_register(&bcm63xx_pcmcia_device);
out_err:
- printk(KERN_ERR "unable to set pcmcia chip select\n");
+ pr_err("unable to set pcmcia chip select\n");
return ret;
}
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 1a47ec2..c961390 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -311,7 +311,7 @@
break;
default:
- printk(KERN_ERR "bogus flow type combination given !\n");
+ pr_err("bogus flow type combination given !\n");
return -EINVAL;
}
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 240fb4f..2be9caa 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -24,7 +24,7 @@
void bcm63xx_machine_halt(void)
{
- printk(KERN_INFO "System halted\n");
+ pr_info("System halted\n");
while (1)
;
}
@@ -34,7 +34,7 @@
u32 reg;
/* soft reset all blocks */
- printk(KERN_INFO "soft-resetting all blocks ...\n");
+ pr_info("soft-resetting all blocks ...\n");
reg = bcm_perf_readl(PERF_SOFTRESET_REG);
reg &= ~SOFTRESET_6348_ALL;
bcm_perf_writel(reg, PERF_SOFTRESET_REG);
@@ -46,7 +46,7 @@
mdelay(10);
/* Jump to the power on address. */
- printk(KERN_INFO "jumping to reset vector.\n");
+ pr_info("jumping to reset vector.\n");
/* set high vectors (base at 0xbfc00000 */
set_c0_status(ST0_BEV | ST0_ERL);
/* run uncached in kseg0 */
@@ -110,7 +110,7 @@
if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
bcm6348_a1_reboot();
- printk(KERN_INFO "triggering watchdog soft-reset...\n");
+ pr_info("triggering watchdog soft-reset...\n");
if (BCMCPU_IS_6328()) {
bcm_wdt_writel(1, WDT_SOFTRESET_REG);
} else {
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
index 5f11359..2110359 100644
--- a/arch/mips/bcm63xx/timer.c
+++ b/arch/mips/bcm63xx/timer.c
@@ -195,7 +195,7 @@
irq = bcm63xx_get_irq_number(IRQ_TIMER);
ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
if (ret) {
- printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
+ pr_err("%s: failed to register irq\n", __func__);
return ret;
}