drivers/cpufreq/cpufreq-cpu0.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * The OPP code in function cpu0_set_target() is reused from
  * drivers/cpufreq/omap-cpufreq.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt

 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/thermal.h>

 static unsigned int transition_latency;
 static unsigned int voltage_tolerance; /* in percentage */

 static struct device *cpu_dev;
 static struct clk *cpu_clk;
 static struct regulator *cpu_reg;
 static struct cpufreq_frequency_table *freq_table;
 static struct thermal_cooling_device *cdev;

 static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	struct dev_pm_opp *opp;
 	unsigned long volt = 0, volt_old = 0, tol = 0;
 	unsigned int old_freq, new_freq;
 	long freq_Hz, freq_exact;
 	int ret;

 	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
 	if (freq_Hz <= 0)
 		freq_Hz = freq_table[index].frequency * 1000;

 	freq_exact = freq_Hz;
 	new_freq = freq_Hz / 1000;
 	old_freq = clk_get_rate(cpu_clk) / 1000;

 	if (!IS_ERR(cpu_reg)) {
 		rcu_read_lock();
 		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			pr_err("failed to find OPP for %ld\n", freq_Hz);
 			return PTR_ERR(opp);
 		}
 		volt = dev_pm_opp_get_voltage(opp);
 		rcu_read_unlock();
 		tol = volt * voltage_tolerance / 100;
 		volt_old = regulator_get_voltage(cpu_reg);
 	}

 	pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
 		 old_freq / 1000, volt_old ? volt_old / 1000 : -1,
 		 new_freq / 1000, volt ? volt / 1000 : -1);

 	/* scaling up?  scale voltage before frequency */
 	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
 		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
 		if (ret) {
 			pr_err("failed to scale voltage up: %d\n", ret);
 			return ret;
 		}
 	}

 	ret = clk_set_rate(cpu_clk, freq_exact);
 	if (ret) {
 		pr_err("failed to set clock rate: %d\n", ret);
 		if (!IS_ERR(cpu_reg))
 			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
 		return ret;
 	}

 	/* scaling down?  scale voltage after frequency */
 	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
 		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
 		if (ret) {
 			pr_err("failed to scale voltage down: %d\n", ret);
 			clk_set_rate(cpu_clk, old_freq * 1000);
 		}
 	}

 	return ret;
 }

 static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
 {
 	policy->clk = cpu_clk;
 	return cpufreq_generic_init(policy, freq_table, transition_latency);
 }

 static struct cpufreq_driver cpu0_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = cpu0_set_target,
 	.get = cpufreq_generic_get,
 	.init = cpu0_cpufreq_init,
 	.name = "generic_cpu0",
 	.attr = cpufreq_generic_attr,
 };

 static int cpu0_cpufreq_probe(struct platform_device *pdev)
 {
 	struct device_node *np;
 	int ret;

 	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
 		pr_err("failed to get cpu0 device\n");
 		return -ENODEV;
 	}

 	np = of_node_get(cpu_dev->of_node);
 	if (!np) {
 		pr_err("failed to find cpu0 node\n");
 		return -ENOENT;
 	}

 	cpu_reg = devm_regulator_get_optional(cpu_dev, "cpu0");
 	if (IS_ERR(cpu_reg)) {
 		/*
 		 * If cpu0 regulator supply node is present, but regulator is
 		 * not yet registered, we should try defering probe.
 		 */
 		if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
 			dev_err(cpu_dev, "cpu0 regulator not ready, retry\n");
 			ret = -EPROBE_DEFER;
 			goto out_put_node;
 		}
 		pr_warn("failed to get cpu0 regulator: %ld\n",
 			PTR_ERR(cpu_reg));
 	}

 	cpu_clk = devm_clk_get(cpu_dev, NULL);
 	if (IS_ERR(cpu_clk)) {
 		ret = PTR_ERR(cpu_clk);
 		pr_err("failed to get cpu0 clock: %d\n", ret);
 		goto out_put_node;
 	}

 	ret = of_init_opp_table(cpu_dev);
 	if (ret) {
 		pr_err("failed to init OPP table: %d\n", ret);
 		goto out_put_node;
 	}

 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		pr_err("failed to init cpufreq table: %d\n", ret);
 		goto out_put_node;
 	}

 	of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);

 	if (of_property_read_u32(np, "clock-latency", &transition_latency))
 		transition_latency = CPUFREQ_ETERNAL;

 	if (!IS_ERR(cpu_reg)) {
 		struct dev_pm_opp *opp;
 		unsigned long min_uV, max_uV;
 		int i;

 		/*
 		 * OPP is maintained in order of increasing frequency, and
 		 * freq_table initialised from OPP is therefore sorted in the
 		 * same order.
 		 */
 		for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
 			;
 		rcu_read_lock();
 		opp = dev_pm_opp_find_freq_exact(cpu_dev,
 				freq_table[0].frequency * 1000, true);
 		min_uV = dev_pm_opp_get_voltage(opp);
 		opp = dev_pm_opp_find_freq_exact(cpu_dev,
 				freq_table[i-1].frequency * 1000, true);
 		max_uV = dev_pm_opp_get_voltage(opp);
 		rcu_read_unlock();
 		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
 		if (ret > 0)
 			transition_latency += ret * 1000;
 	}

 	ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
 	if (ret) {
 		pr_err("failed register driver: %d\n", ret);
 		goto out_free_table;
 	}

 	/*
 	 * For now, just loading the cooling device;
 	 * thermal DT code takes care of matching them.
 	 */
 	if (of_find_property(np, "#cooling-cells", NULL)) {
 		cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
 		if (IS_ERR(cdev))
 			pr_err("running cpufreq without cooling device: %ld\n",
 			       PTR_ERR(cdev));
 	}

 	of_node_put(np);
 	return 0;

 out_free_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 out_put_node:
 	of_node_put(np);
 	return ret;
 }

 static int cpu0_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_cooling_unregister(cdev);
 	cpufreq_unregister_driver(&cpu0_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);

 	return 0;
 }

 static struct platform_driver cpu0_cpufreq_platdrv = {
 	.driver = {
 		.name	= "cpufreq-cpu0",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= cpu0_cpufreq_probe,
 	.remove		= cpu0_cpufreq_remove,
 };
 module_platform_driver(cpu0_cpufreq_platdrv);

 MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
 MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
 MODULE_LICENSE("GPL");
	/*
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* The OPP code in function cpu0_set_target() is reused from
	* drivers/cpufreq/omap-cpufreq.c
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/clk.h>
	#include <linux/cpu.h>
	#include <linux/cpu_cooling.h>
	#include <linux/cpufreq.h>
	#include <linux/cpumask.h>
	#include <linux/err.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/pm_opp.h>
	#include <linux/platform_device.h>
	#include <linux/regulator/consumer.h>
	#include <linux/slab.h>
	#include <linux/thermal.h>

	static unsigned int transition_latency;
	static unsigned int voltage_tolerance; /* in percentage */

	static struct device *cpu_dev;
	static struct clk *cpu_clk;
	static struct regulator *cpu_reg;
	static struct cpufreq_frequency_table *freq_table;
	static struct thermal_cooling_device *cdev;

	static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
	{
	struct dev_pm_opp *opp;
	unsigned long volt = 0, volt_old = 0, tol = 0;
	unsigned int old_freq, new_freq;
	long freq_Hz, freq_exact;
	int ret;

	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
	if (freq_Hz <= 0)
	freq_Hz = freq_table[index].frequency * 1000;

	freq_exact = freq_Hz;
	new_freq = freq_Hz / 1000;
	old_freq = clk_get_rate(cpu_clk) / 1000;

	if (!IS_ERR(cpu_reg)) {
	rcu_read_lock();
	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
	if (IS_ERR(opp)) {
	rcu_read_unlock();
	pr_err("failed to find OPP for %ld\n", freq_Hz);
	return PTR_ERR(opp);
	}
	volt = dev_pm_opp_get_voltage(opp);
	rcu_read_unlock();
	tol = volt * voltage_tolerance / 100;
	volt_old = regulator_get_voltage(cpu_reg);
	}

	pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
	old_freq / 1000, volt_old ? volt_old / 1000 : -1,
	new_freq / 1000, volt ? volt / 1000 : -1);

	/* scaling up? scale voltage before frequency */
	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
	ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
	if (ret) {
	pr_err("failed to scale voltage up: %d\n", ret);
	return ret;
	}
	}

	ret = clk_set_rate(cpu_clk, freq_exact);
	if (ret) {
	pr_err("failed to set clock rate: %d\n", ret);
	if (!IS_ERR(cpu_reg))
	regulator_set_voltage_tol(cpu_reg, volt_old, tol);
	return ret;
	}

	/* scaling down? scale voltage after frequency */
	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
	ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
	if (ret) {
	pr_err("failed to scale voltage down: %d\n", ret);
	clk_set_rate(cpu_clk, old_freq * 1000);
	}
	}

	return ret;
	}

	static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
	{
	policy->clk = cpu_clk;
	return cpufreq_generic_init(policy, freq_table, transition_latency);
	}

	static struct cpufreq_driver cpu0_cpufreq_driver = {
	.flags = CPUFREQ_STICKY,
	.verify = cpufreq_generic_frequency_table_verify,
	.target_index = cpu0_set_target,
	.get = cpufreq_generic_get,
	.init = cpu0_cpufreq_init,
	.name = "generic_cpu0",
	.attr = cpufreq_generic_attr,
	};

	static int cpu0_cpufreq_probe(struct platform_device *pdev)
	{
	struct device_node *np;
	int ret;

	cpu_dev = get_cpu_device(0);
	if (!cpu_dev) {
	pr_err("failed to get cpu0 device\n");
	return -ENODEV;
	}

	np = of_node_get(cpu_dev->of_node);
	if (!np) {
	pr_err("failed to find cpu0 node\n");
	return -ENOENT;
	}

	cpu_reg = devm_regulator_get_optional(cpu_dev, "cpu0");
	if (IS_ERR(cpu_reg)) {
	/*
	* If cpu0 regulator supply node is present, but regulator is
	* not yet registered, we should try defering probe.
	*/
	if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
	dev_err(cpu_dev, "cpu0 regulator not ready, retry\n");
	ret = -EPROBE_DEFER;
	goto out_put_node;
	}
	pr_warn("failed to get cpu0 regulator: %ld\n",
	PTR_ERR(cpu_reg));
	}

	cpu_clk = devm_clk_get(cpu_dev, NULL);
	if (IS_ERR(cpu_clk)) {
	ret = PTR_ERR(cpu_clk);
	pr_err("failed to get cpu0 clock: %d\n", ret);
	goto out_put_node;
	}

	ret = of_init_opp_table(cpu_dev);
	if (ret) {
	pr_err("failed to init OPP table: %d\n", ret);
	goto out_put_node;
	}

	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
	if (ret) {
	pr_err("failed to init cpufreq table: %d\n", ret);
	goto out_put_node;
	}

	of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);

	if (of_property_read_u32(np, "clock-latency", &transition_latency))
	transition_latency = CPUFREQ_ETERNAL;

	if (!IS_ERR(cpu_reg)) {
	struct dev_pm_opp *opp;
	unsigned long min_uV, max_uV;
	int i;

	/*
	* OPP is maintained in order of increasing frequency, and
	* freq_table initialised from OPP is therefore sorted in the
	* same order.
	*/
	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
	;
	rcu_read_lock();
	opp = dev_pm_opp_find_freq_exact(cpu_dev,
	freq_table[0].frequency * 1000, true);
	min_uV = dev_pm_opp_get_voltage(opp);
	opp = dev_pm_opp_find_freq_exact(cpu_dev,
	freq_table[i-1].frequency * 1000, true);
	max_uV = dev_pm_opp_get_voltage(opp);
	rcu_read_unlock();
	ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
	if (ret > 0)
	transition_latency += ret * 1000;
	}

	ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
	if (ret) {
	pr_err("failed register driver: %d\n", ret);
	goto out_free_table;
	}

	/*
	* For now, just loading the cooling device;
	* thermal DT code takes care of matching them.
	*/
	if (of_find_property(np, "#cooling-cells", NULL)) {
	cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
	if (IS_ERR(cdev))
	pr_err("running cpufreq without cooling device: %ld\n",
	PTR_ERR(cdev));
	}

	of_node_put(np);
	return 0;

	out_free_table:
	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
	out_put_node:
	of_node_put(np);
	return ret;
	}

	static int cpu0_cpufreq_remove(struct platform_device *pdev)
	{
	cpufreq_cooling_unregister(cdev);
	cpufreq_unregister_driver(&cpu0_cpufreq_driver);
	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);

	return 0;
	}

	static struct platform_driver cpu0_cpufreq_platdrv = {
	.driver = {
	.name = "cpufreq-cpu0",
	.owner = THIS_MODULE,
	},
	.probe = cpu0_cpufreq_probe,
	.remove = cpu0_cpufreq_remove,
	};
	module_platform_driver(cpu0_cpufreq_platdrv);

	MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
	MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
	MODULE_LICENSE("GPL");