| /* |
| * HID driver for N-Trig touchscreens |
| * |
| * Copyright (c) 2008 Rafi Rubin |
| * Copyright (c) 2009 Stephane Chatty |
| * |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/hid.h> |
| #include <linux/module.h> |
| |
| #include "hid-ids.h" |
| |
| #define NTRIG_DUPLICATE_USAGES 0x001 |
| |
| #define nt_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ |
| EV_KEY, (c)) |
| |
| struct ntrig_data { |
| __s32 x, y, id, w, h; |
| char reading_a_point, found_contact_id; |
| char pen_active; |
| char finger_active; |
| char inverted; |
| }; |
| |
| /* |
| * this driver is aimed at two firmware versions in circulation: |
| * - dual pen/finger single touch |
| * - finger multitouch, pen not working |
| */ |
| |
| static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| switch (usage->hid & HID_USAGE_PAGE) { |
| |
| case HID_UP_GENDESK: |
| switch (usage->hid) { |
| case HID_GD_X: |
| hid_map_usage(hi, usage, bit, max, |
| EV_ABS, ABS_MT_POSITION_X); |
| input_set_abs_params(hi->input, ABS_X, |
| field->logical_minimum, |
| field->logical_maximum, 0, 0); |
| return 1; |
| case HID_GD_Y: |
| hid_map_usage(hi, usage, bit, max, |
| EV_ABS, ABS_MT_POSITION_Y); |
| input_set_abs_params(hi->input, ABS_Y, |
| field->logical_minimum, |
| field->logical_maximum, 0, 0); |
| return 1; |
| } |
| return 0; |
| |
| case HID_UP_DIGITIZER: |
| switch (usage->hid) { |
| /* we do not want to map these for now */ |
| case HID_DG_CONTACTID: /* value is useless */ |
| case HID_DG_INPUTMODE: |
| case HID_DG_DEVICEINDEX: |
| case HID_DG_CONTACTCOUNT: |
| case HID_DG_CONTACTMAX: |
| return -1; |
| |
| /* original mapping by Rafi Rubin */ |
| case HID_DG_CONFIDENCE: |
| nt_map_key_clear(BTN_TOOL_DOUBLETAP); |
| return 1; |
| |
| /* width/height mapped on TouchMajor/TouchMinor/Orientation */ |
| case HID_DG_WIDTH: |
| hid_map_usage(hi, usage, bit, max, |
| EV_ABS, ABS_MT_TOUCH_MAJOR); |
| return 1; |
| case HID_DG_HEIGHT: |
| hid_map_usage(hi, usage, bit, max, |
| EV_ABS, ABS_MT_TOUCH_MINOR); |
| input_set_abs_params(hi->input, ABS_MT_ORIENTATION, |
| 0, 1, 0, 0); |
| return 1; |
| } |
| return 0; |
| |
| case 0xff000000: |
| /* we do not want to map these: no input-oriented meaning */ |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| if (usage->type == EV_KEY || usage->type == EV_REL |
| || usage->type == EV_ABS) |
| clear_bit(usage->code, *bit); |
| |
| return 0; |
| } |
| |
| /* |
| * this function is called upon all reports |
| * so that we can filter contact point information, |
| * decide whether we are in multi or single touch mode |
| * and call input_mt_sync after each point if necessary |
| */ |
| static int ntrig_event (struct hid_device *hid, struct hid_field *field, |
| struct hid_usage *usage, __s32 value) |
| { |
| struct input_dev *input = field->hidinput->input; |
| struct ntrig_data *nd = hid_get_drvdata(hid); |
| |
| if (hid->claimed & HID_CLAIMED_INPUT) { |
| switch (usage->hid) { |
| |
| case HID_DG_INRANGE: |
| if (field->application & 0x3) |
| nd->pen_active = (value != 0); |
| else |
| nd->finger_active = (value != 0); |
| return 0; |
| |
| case HID_DG_INVERT: |
| nd->inverted = value; |
| return 0; |
| |
| case HID_GD_X: |
| nd->x = value; |
| nd->reading_a_point = 1; |
| break; |
| case HID_GD_Y: |
| nd->y = value; |
| break; |
| case HID_DG_CONTACTID: |
| nd->id = value; |
| /* we receive this only when in multitouch mode */ |
| nd->found_contact_id = 1; |
| break; |
| case HID_DG_WIDTH: |
| nd->w = value; |
| break; |
| case HID_DG_HEIGHT: |
| nd->h = value; |
| /* |
| * when in single touch mode, this is the last |
| * report received in a finger event. We want |
| * to emit a normal (X, Y) position |
| */ |
| if (!nd->found_contact_id) { |
| if (nd->pen_active && nd->finger_active) { |
| input_report_key(input, BTN_TOOL_DOUBLETAP, 0); |
| input_report_key(input, BTN_TOOL_DOUBLETAP, 1); |
| } |
| input_event(input, EV_ABS, ABS_X, nd->x); |
| input_event(input, EV_ABS, ABS_Y, nd->y); |
| } |
| break; |
| case HID_DG_TIPPRESSURE: |
| /* |
| * when in single touch mode, this is the last |
| * report received in a pen event. We want |
| * to emit a normal (X, Y) position |
| */ |
| if (! nd->found_contact_id) { |
| if (nd->pen_active && nd->finger_active) { |
| input_report_key(input, |
| nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN |
| , 0); |
| input_report_key(input, |
| nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN |
| , 1); |
| } |
| input_event(input, EV_ABS, ABS_X, nd->x); |
| input_event(input, EV_ABS, ABS_Y, nd->y); |
| input_event(input, EV_ABS, ABS_PRESSURE, value); |
| } |
| break; |
| case 0xff000002: |
| /* |
| * we receive this when the device is in multitouch |
| * mode. The first of the three values tagged with |
| * this usage tells if the contact point is real |
| * or a placeholder |
| */ |
| if (!nd->reading_a_point || value != 1) |
| break; |
| /* emit a normal (X, Y) for the first point only */ |
| if (nd->id == 0) { |
| input_event(input, EV_ABS, ABS_X, nd->x); |
| input_event(input, EV_ABS, ABS_Y, nd->y); |
| } |
| input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x); |
| input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y); |
| if (nd->w > nd->h) { |
| input_event(input, EV_ABS, |
| ABS_MT_ORIENTATION, 1); |
| input_event(input, EV_ABS, |
| ABS_MT_TOUCH_MAJOR, nd->w); |
| input_event(input, EV_ABS, |
| ABS_MT_TOUCH_MINOR, nd->h); |
| } else { |
| input_event(input, EV_ABS, |
| ABS_MT_ORIENTATION, 0); |
| input_event(input, EV_ABS, |
| ABS_MT_TOUCH_MAJOR, nd->h); |
| input_event(input, EV_ABS, |
| ABS_MT_TOUCH_MINOR, nd->w); |
| } |
| input_mt_sync(field->hidinput->input); |
| nd->reading_a_point = 0; |
| nd->found_contact_id = 0; |
| break; |
| |
| default: |
| /* fallback to the generic hidinput handling */ |
| return 0; |
| } |
| } |
| |
| /* we have handled the hidinput part, now remains hiddev */ |
| if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) |
| hid->hiddev_hid_event(hid, field, usage, value); |
| |
| return 1; |
| } |
| |
| static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| { |
| int ret; |
| struct ntrig_data *nd; |
| |
| nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL); |
| if (!nd) { |
| dev_err(&hdev->dev, "cannot allocate N-Trig data\n"); |
| return -ENOMEM; |
| } |
| nd->reading_a_point = 0; |
| nd->found_contact_id = 0; |
| hid_set_drvdata(hdev, nd); |
| |
| ret = hid_parse(hdev); |
| if (!ret) |
| ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); |
| |
| if (ret) |
| kfree (nd); |
| |
| return ret; |
| } |
| |
| static void ntrig_remove(struct hid_device *hdev) |
| { |
| hid_hw_stop(hdev); |
| kfree(hid_get_drvdata(hdev)); |
| } |
| |
| static const struct hid_device_id ntrig_devices[] = { |
| { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN), |
| .driver_data = NTRIG_DUPLICATE_USAGES }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, ntrig_devices); |
| |
| static const struct hid_usage_id ntrig_grabbed_usages[] = { |
| { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, |
| { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} |
| }; |
| |
| static struct hid_driver ntrig_driver = { |
| .name = "ntrig", |
| .id_table = ntrig_devices, |
| .probe = ntrig_probe, |
| .remove = ntrig_remove, |
| .input_mapping = ntrig_input_mapping, |
| .input_mapped = ntrig_input_mapped, |
| .usage_table = ntrig_grabbed_usages, |
| .event = ntrig_event, |
| }; |
| |
| static int __init ntrig_init(void) |
| { |
| return hid_register_driver(&ntrig_driver); |
| } |
| |
| static void __exit ntrig_exit(void) |
| { |
| hid_unregister_driver(&ntrig_driver); |
| } |
| |
| module_init(ntrig_init); |
| module_exit(ntrig_exit); |
| MODULE_LICENSE("GPL"); |