| /* |
| * linux/include/linux/sunrpc/sched.h |
| * |
| * Scheduling primitives for kernel Sun RPC. |
| * |
| * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de> |
| */ |
| |
| #ifndef _LINUX_SUNRPC_SCHED_H_ |
| #define _LINUX_SUNRPC_SCHED_H_ |
| |
| #include <linux/timer.h> |
| #include <linux/sunrpc/types.h> |
| #include <linux/rcupdate.h> |
| #include <linux/spinlock.h> |
| #include <linux/wait.h> |
| #include <linux/workqueue.h> |
| #include <linux/sunrpc/xdr.h> |
| |
| /* |
| * This is the actual RPC procedure call info. |
| */ |
| struct rpc_procinfo; |
| struct rpc_message { |
| struct rpc_procinfo * rpc_proc; /* Procedure information */ |
| void * rpc_argp; /* Arguments */ |
| void * rpc_resp; /* Result */ |
| struct rpc_cred * rpc_cred; /* Credentials */ |
| }; |
| |
| struct rpc_call_ops; |
| struct rpc_wait_queue; |
| struct rpc_wait { |
| struct list_head list; /* wait queue links */ |
| struct list_head links; /* Links to related tasks */ |
| struct rpc_wait_queue * rpc_waitq; /* RPC wait queue we're on */ |
| }; |
| |
| /* |
| * This is the RPC task struct |
| */ |
| struct rpc_task { |
| #ifdef RPC_DEBUG |
| unsigned long tk_magic; /* 0xf00baa */ |
| #endif |
| atomic_t tk_count; /* Reference count */ |
| struct list_head tk_task; /* global list of tasks */ |
| struct rpc_clnt * tk_client; /* RPC client */ |
| struct rpc_rqst * tk_rqstp; /* RPC request */ |
| int tk_status; /* result of last operation */ |
| |
| /* |
| * RPC call state |
| */ |
| struct rpc_message tk_msg; /* RPC call info */ |
| __u8 tk_garb_retry; |
| __u8 tk_cred_retry; |
| |
| unsigned long tk_cookie; /* Cookie for batching tasks */ |
| |
| /* |
| * timeout_fn to be executed by timer bottom half |
| * callback to be executed after waking up |
| * action next procedure for async tasks |
| * tk_ops caller callbacks |
| */ |
| void (*tk_timeout_fn)(struct rpc_task *); |
| void (*tk_callback)(struct rpc_task *); |
| void (*tk_action)(struct rpc_task *); |
| const struct rpc_call_ops *tk_ops; |
| void * tk_calldata; |
| |
| /* |
| * tk_timer is used for async processing by the RPC scheduling |
| * primitives. You should not access this directly unless |
| * you have a pathological interest in kernel oopses. |
| */ |
| struct timer_list tk_timer; /* kernel timer */ |
| unsigned long tk_timeout; /* timeout for rpc_sleep() */ |
| unsigned short tk_flags; /* misc flags */ |
| unsigned char tk_priority : 2;/* Task priority */ |
| unsigned long tk_runstate; /* Task run status */ |
| struct workqueue_struct *tk_workqueue; /* Normally rpciod, but could |
| * be any workqueue |
| */ |
| union { |
| struct work_struct tk_work; /* Async task work queue */ |
| struct rpc_wait tk_wait; /* RPC wait */ |
| struct rcu_head tk_rcu; /* for task deletion */ |
| } u; |
| |
| unsigned short tk_timeouts; /* maj timeouts */ |
| size_t tk_bytes_sent; /* total bytes sent */ |
| unsigned long tk_start; /* RPC task init timestamp */ |
| long tk_rtt; /* round-trip time (jiffies) */ |
| |
| #ifdef RPC_DEBUG |
| unsigned short tk_pid; /* debugging aid */ |
| #endif |
| }; |
| #define tk_auth tk_client->cl_auth |
| #define tk_xprt tk_client->cl_xprt |
| |
| /* support walking a list of tasks on a wait queue */ |
| #define task_for_each(task, pos, head) \ |
| list_for_each(pos, head) \ |
| if ((task=list_entry(pos, struct rpc_task, u.tk_wait.list)),1) |
| |
| #define task_for_first(task, head) \ |
| if (!list_empty(head) && \ |
| ((task=list_entry((head)->next, struct rpc_task, u.tk_wait.list)),1)) |
| |
| typedef void (*rpc_action)(struct rpc_task *); |
| |
| struct rpc_call_ops { |
| void (*rpc_call_prepare)(struct rpc_task *, void *); |
| void (*rpc_call_done)(struct rpc_task *, void *); |
| void (*rpc_release)(void *); |
| }; |
| |
| |
| /* |
| * RPC task flags |
| */ |
| #define RPC_TASK_ASYNC 0x0001 /* is an async task */ |
| #define RPC_TASK_SWAPPER 0x0002 /* is swapping in/out */ |
| #define RPC_CALL_MAJORSEEN 0x0020 /* major timeout seen */ |
| #define RPC_TASK_ROOTCREDS 0x0040 /* force root creds */ |
| #define RPC_TASK_DYNAMIC 0x0080 /* task was kmalloc'ed */ |
| #define RPC_TASK_KILLED 0x0100 /* task was killed */ |
| #define RPC_TASK_SOFT 0x0200 /* Use soft timeouts */ |
| #define RPC_TASK_NOINTR 0x0400 /* uninterruptible task */ |
| |
| #define RPC_IS_ASYNC(t) ((t)->tk_flags & RPC_TASK_ASYNC) |
| #define RPC_IS_SWAPPER(t) ((t)->tk_flags & RPC_TASK_SWAPPER) |
| #define RPC_DO_ROOTOVERRIDE(t) ((t)->tk_flags & RPC_TASK_ROOTCREDS) |
| #define RPC_ASSASSINATED(t) ((t)->tk_flags & RPC_TASK_KILLED) |
| #define RPC_DO_CALLBACK(t) ((t)->tk_callback != NULL) |
| #define RPC_IS_SOFT(t) ((t)->tk_flags & RPC_TASK_SOFT) |
| #define RPC_TASK_UNINTERRUPTIBLE(t) ((t)->tk_flags & RPC_TASK_NOINTR) |
| |
| #define RPC_TASK_RUNNING 0 |
| #define RPC_TASK_QUEUED 1 |
| #define RPC_TASK_WAKEUP 2 |
| #define RPC_TASK_HAS_TIMER 3 |
| #define RPC_TASK_ACTIVE 4 |
| |
| #define RPC_IS_RUNNING(t) test_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) |
| #define rpc_set_running(t) set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) |
| #define rpc_test_and_set_running(t) \ |
| test_and_set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) |
| #define rpc_clear_running(t) \ |
| do { \ |
| smp_mb__before_clear_bit(); \ |
| clear_bit(RPC_TASK_RUNNING, &(t)->tk_runstate); \ |
| smp_mb__after_clear_bit(); \ |
| } while (0) |
| |
| #define RPC_IS_QUEUED(t) test_bit(RPC_TASK_QUEUED, &(t)->tk_runstate) |
| #define rpc_set_queued(t) set_bit(RPC_TASK_QUEUED, &(t)->tk_runstate) |
| #define rpc_clear_queued(t) \ |
| do { \ |
| smp_mb__before_clear_bit(); \ |
| clear_bit(RPC_TASK_QUEUED, &(t)->tk_runstate); \ |
| smp_mb__after_clear_bit(); \ |
| } while (0) |
| |
| #define rpc_start_wakeup(t) \ |
| (test_and_set_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate) == 0) |
| #define rpc_finish_wakeup(t) \ |
| do { \ |
| smp_mb__before_clear_bit(); \ |
| clear_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate); \ |
| smp_mb__after_clear_bit(); \ |
| } while (0) |
| |
| #define RPC_IS_ACTIVATED(t) test_bit(RPC_TASK_ACTIVE, &(t)->tk_runstate) |
| |
| /* |
| * Task priorities. |
| * Note: if you change these, you must also change |
| * the task initialization definitions below. |
| */ |
| #define RPC_PRIORITY_LOW 0 |
| #define RPC_PRIORITY_NORMAL 1 |
| #define RPC_PRIORITY_HIGH 2 |
| #define RPC_NR_PRIORITY (RPC_PRIORITY_HIGH+1) |
| |
| /* |
| * RPC synchronization objects |
| */ |
| struct rpc_wait_queue { |
| spinlock_t lock; |
| struct list_head tasks[RPC_NR_PRIORITY]; /* task queue for each priority level */ |
| unsigned long cookie; /* cookie of last task serviced */ |
| unsigned char maxpriority; /* maximum priority (0 if queue is not a priority queue) */ |
| unsigned char priority; /* current priority */ |
| unsigned char count; /* # task groups remaining serviced so far */ |
| unsigned char nr; /* # tasks remaining for cookie */ |
| unsigned short qlen; /* total # tasks waiting in queue */ |
| #ifdef RPC_DEBUG |
| const char * name; |
| #endif |
| }; |
| |
| /* |
| * This is the # requests to send consecutively |
| * from a single cookie. The aim is to improve |
| * performance of NFS operations such as read/write. |
| */ |
| #define RPC_BATCH_COUNT 16 |
| |
| #ifndef RPC_DEBUG |
| # define RPC_WAITQ_INIT(var,qname) { \ |
| .lock = __SPIN_LOCK_UNLOCKED(var.lock), \ |
| .tasks = { \ |
| [0] = LIST_HEAD_INIT(var.tasks[0]), \ |
| [1] = LIST_HEAD_INIT(var.tasks[1]), \ |
| [2] = LIST_HEAD_INIT(var.tasks[2]), \ |
| }, \ |
| } |
| #else |
| # define RPC_WAITQ_INIT(var,qname) { \ |
| .lock = __SPIN_LOCK_UNLOCKED(var.lock), \ |
| .tasks = { \ |
| [0] = LIST_HEAD_INIT(var.tasks[0]), \ |
| [1] = LIST_HEAD_INIT(var.tasks[1]), \ |
| [2] = LIST_HEAD_INIT(var.tasks[2]), \ |
| }, \ |
| .name = qname, \ |
| } |
| #endif |
| # define RPC_WAITQ(var,qname) struct rpc_wait_queue var = RPC_WAITQ_INIT(var,qname) |
| |
| #define RPC_IS_PRIORITY(q) ((q)->maxpriority > 0) |
| |
| /* |
| * Function prototypes |
| */ |
| struct rpc_task *rpc_new_task(struct rpc_clnt *, int flags, |
| const struct rpc_call_ops *ops, void *data); |
| struct rpc_task *rpc_run_task(struct rpc_clnt *clnt, int flags, |
| const struct rpc_call_ops *ops, void *data); |
| void rpc_init_task(struct rpc_task *task, struct rpc_clnt *clnt, |
| int flags, const struct rpc_call_ops *ops, |
| void *data); |
| void rpc_put_task(struct rpc_task *); |
| void rpc_exit_task(struct rpc_task *); |
| void rpc_release_calldata(const struct rpc_call_ops *, void *); |
| void rpc_killall_tasks(struct rpc_clnt *); |
| void rpc_execute(struct rpc_task *); |
| void rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *); |
| void rpc_init_wait_queue(struct rpc_wait_queue *, const char *); |
| void rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *, |
| rpc_action action, rpc_action timer); |
| void rpc_wake_up_task(struct rpc_task *); |
| void rpc_wake_up(struct rpc_wait_queue *); |
| struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *); |
| void rpc_wake_up_status(struct rpc_wait_queue *, int); |
| void rpc_delay(struct rpc_task *, unsigned long); |
| void * rpc_malloc(struct rpc_task *, size_t); |
| void rpc_free(void *); |
| int rpciod_up(void); |
| void rpciod_down(void); |
| int __rpc_wait_for_completion_task(struct rpc_task *task, int (*)(void *)); |
| #ifdef RPC_DEBUG |
| void rpc_show_tasks(void); |
| #endif |
| int rpc_init_mempool(void); |
| void rpc_destroy_mempool(void); |
| extern struct workqueue_struct *rpciod_workqueue; |
| |
| static inline void rpc_exit(struct rpc_task *task, int status) |
| { |
| task->tk_status = status; |
| task->tk_action = rpc_exit_task; |
| } |
| |
| static inline int rpc_wait_for_completion_task(struct rpc_task *task) |
| { |
| return __rpc_wait_for_completion_task(task, NULL); |
| } |
| |
| #ifdef RPC_DEBUG |
| static inline const char * rpc_qname(struct rpc_wait_queue *q) |
| { |
| return ((q && q->name) ? q->name : "unknown"); |
| } |
| #endif |
| |
| #endif /* _LINUX_SUNRPC_SCHED_H_ */ |