| /* |
| * Authors: Frank Rowand <frank_rowand@mvista.com>, |
| * Debbie Chu <debbie_chu@mvista.com>, or source@mvista.com |
| * Further modifications by Armin Kuster <akuster@mvista.com> |
| * |
| * 2000 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| * Based on arch/ppc/kernel/indirect.c, Copyright (C) 1998 Gabriel Paubert. |
| */ |
| |
| #include <linux/pci.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| #include <asm/machdep.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <asm/ocp.h> |
| #include <asm/ibm4xx.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/ibm_ocp_pci.h> |
| |
| |
| extern void bios_fixup(struct pci_controller *, struct pcil0_regs *); |
| extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, |
| unsigned char pin); |
| |
| void |
| ppc405_pcibios_fixup_resources(struct pci_dev *dev) |
| { |
| int i; |
| unsigned long max_host_addr; |
| unsigned long min_host_addr; |
| struct resource *res; |
| |
| /* |
| * openbios puts some graphics cards in the same range as the host |
| * controller uses to map to SDRAM. Fix it. |
| */ |
| |
| min_host_addr = 0; |
| max_host_addr = PPC405_PCI_MEM_BASE - 1; |
| |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| res = dev->resource + i; |
| if (!res->start) |
| continue; |
| if ((res->flags & IORESOURCE_MEM) && |
| (((res->start >= min_host_addr) |
| && (res->start <= max_host_addr)) |
| || ((res->end >= min_host_addr) |
| && (res->end <= max_host_addr)) |
| || ((res->start < min_host_addr) |
| && (res->end > max_host_addr)) |
| ) |
| ) { |
| |
| /* force pcibios_assign_resources() to assign a new address */ |
| res->end -= res->start; |
| res->start = 0; |
| } |
| } |
| } |
| |
| static int |
| ppc4xx_exclude_device(unsigned char bus, unsigned char devfn) |
| { |
| /* We prevent us from seeing ourselves to avoid having |
| * the kernel try to remap our BAR #1 and fuck up bus |
| * master from external PCI devices |
| */ |
| return (bus == 0 && devfn == 0); |
| } |
| |
| void |
| ppc4xx_find_bridges(void) |
| { |
| struct pci_controller *hose_a; |
| struct pcil0_regs *pcip; |
| unsigned int tmp_addr; |
| unsigned int tmp_size; |
| unsigned int reg_index; |
| unsigned int new_pmm_max = 0; |
| unsigned int new_pmm_min = 0; |
| |
| isa_io_base = 0; |
| isa_mem_base = 0; |
| pci_dram_offset = 0; |
| |
| #if (PSR_PCI_ARBIT_EN > 1) |
| /* Check if running in slave mode */ |
| if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) { |
| printk("Running as PCI slave, kernel PCI disabled !\n"); |
| return; |
| } |
| #endif |
| /* Setup PCI32 hose */ |
| hose_a = pcibios_alloc_controller(); |
| if (!hose_a) |
| return; |
| setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR, |
| PPC405_PCI_CONFIG_DATA); |
| |
| pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE); |
| if (pcip != NULL) { |
| |
| #if defined(CONFIG_BIOS_FIXUP) |
| bios_fixup(hose_a, pcip); |
| #endif |
| new_pmm_min = 0xffffffff; |
| for (reg_index = 0; reg_index < 3; reg_index++) { |
| tmp_size = in_le32(&pcip->pmm[reg_index].ma); // mask & attrs |
| /* test the enable bit */ |
| if ((tmp_size & 0x1) == 0) |
| continue; |
| tmp_addr = in_le32(&pcip->pmm[reg_index].pcila); // PCI addr |
| if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) { |
| printk(KERN_DEBUG |
| "Disabling mapping to PCI mem addr 0x%8.8x\n", |
| tmp_addr); |
| out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1); // *_PMMOMA |
| continue; |
| } |
| tmp_addr = in_le32(&pcip->pmm[reg_index].la); // *_PMMOLA |
| if (tmp_addr < new_pmm_min) |
| new_pmm_min = tmp_addr; |
| tmp_addr = tmp_addr + |
| (0xffffffff - (tmp_size & 0xffffc000)); |
| if (tmp_addr > PPC405_PCI_UPPER_MEM) { |
| new_pmm_max = tmp_addr; // PPC405_PCI_UPPER_MEM |
| } else { |
| new_pmm_max = PPC405_PCI_UPPER_MEM; |
| } |
| |
| } // for |
| |
| iounmap(pcip); |
| } |
| |
| hose_a->first_busno = 0; |
| hose_a->last_busno = 0xff; |
| hose_a->pci_mem_offset = 0; |
| |
| /* Setup bridge memory/IO ranges & resources |
| * TODO: Handle firmwares setting up a legacy ISA mem base |
| */ |
| hose_a->io_space.start = PPC405_PCI_LOWER_IO; |
| hose_a->io_space.end = PPC405_PCI_UPPER_IO; |
| hose_a->mem_space.start = new_pmm_min; |
| hose_a->mem_space.end = new_pmm_max; |
| hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE; |
| hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000); |
| hose_a->io_resource.start = 0; |
| hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO; |
| hose_a->io_resource.flags = IORESOURCE_IO; |
| hose_a->io_resource.name = "PCI I/O"; |
| hose_a->mem_resources[0].start = new_pmm_min; |
| hose_a->mem_resources[0].end = new_pmm_max; |
| hose_a->mem_resources[0].flags = IORESOURCE_MEM; |
| hose_a->mem_resources[0].name = "PCI Memory"; |
| isa_io_base = (int) hose_a->io_base_virt; |
| isa_mem_base = 0; /* ISA not implemented */ |
| ISA_DMA_THRESHOLD = 0x00ffffff; /* ??? ISA not implemented */ |
| |
| /* Scan busses & initial setup by pci_auto */ |
| hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); |
| hose_a->last_busno = 0; |
| |
| /* Setup ppc_md */ |
| ppc_md.pcibios_fixup = NULL; |
| ppc_md.pci_exclude_device = ppc4xx_exclude_device; |
| ppc_md.pcibios_fixup_resources = ppc405_pcibios_fixup_resources; |
| ppc_md.pci_swizzle = common_swizzle; |
| ppc_md.pci_map_irq = ppc405_map_irq; |
| } |