arch/arm/boot/dts/qcom/sdxpoorwills-pcie.dtsi

/*
 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include <dt-bindings/clock/qcom,gcc-sdxpoorwills.h>

&soc {
	pcie0: qcom,pcie@1c00000 {
		compatible = "qcom,pci-msm";
		cell-index = <0>;

		reg = <0x01c00000 0x2000>,
		      <0x01c02000 0x1000>,
		      <0x40000000 0xf1d>,
		      <0x40000f20 0xa8>,
		      <0x40001000 0x1000>,
		      <0x40100000 0x100000>,
		      <0x40200000 0x100000>,
		      <0x40300000 0x1d00000>,
		      <0x01fce008 0x4>;

		reg-names = "parf", "phy", "dm_core", "elbi", "iatu",
				"conf", "io", "bars", "tcsr";

		#address-cells = <3>;
		#size-cells = <2>;
		ranges = <0x01000000 0x0 0x40200000 0x40200000 0x0 0x100000>,
			<0x02000000 0x0 0x40300000 0x40300000 0x0 0x1d00000>;
		interrupt-parent = <&pcie0>;
		interrupts = <0 1 2 3 4 5>;
		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0xffffffff>;
		interrupt-map = <0 0 0 0 &intc 0 119 0
				0 0 0 1 &intc 0 141 0
				0 0 0 2 &intc 0 142 0
				0 0 0 3 &intc 0 143 0
				0 0 0 4 &intc 0 144 0
				0 0 0 5 &intc 0 140 0>;

		interrupt-names = "int_msi", "int_a", "int_b", "int_c",
				"int_d", "int_global_int";

		qcom,phy-sequence = <0x840 0x03 0x0
				0x094 0x08 0x0
				0x154 0x33 0x0
				0x058 0x0f 0x0
				0x0a4 0x42 0x0
				0x1bc 0x11 0x0
				0x0bc 0x82 0x0
				0x0d4 0x03 0x0
				0x0d0 0x55 0x0
				0x0cc 0x55 0x0
				0x0b0 0x1a 0x0
				0x0ac 0x0a 0x0
				0x158 0x01 0x0
				0x074 0x06 0x0
				0x07c 0x16 0x0
				0x084 0x36 0x0
				0x1b0 0x1e 0x0
				0x1ac 0xb9 0x0
				0x050 0x07 0x0
				0x29c 0x12 0x0
				0x284 0x05 0x0
				0x234 0xd9 0x0
				0x238 0xcc 0x0
				0x51c 0x03 0x0
				0x518 0x1c 0x0
				0x524 0x14 0x0
				0x4ec 0x0e 0x0
				0x4f0 0x4a 0x0
				0x4f4 0x0f 0x0
				0x5b4 0x04 0x0
				0x434 0x7f 0x0
				0x444 0x70 0x0
				0x510 0x17 0x0
				0x4d8 0x01 0x0
				0x598 0xe0 0x0
				0x59c 0xc8 0x0
				0x5a0 0xc8 0x0
				0x5a4 0x09 0x0
				0x5a8 0xb1 0x0
				0x584 0x24 0x0
				0x588 0xe4 0x0
				0x58c 0xec 0x0
				0x590 0x39 0x0
				0x594 0x36 0x0
				0x570 0xef 0x0
				0x574 0xef 0x0
				0x578 0x2f 0x0
				0x57c 0xd3 0x0
				0x580 0x40 0x0
				0x4fc 0x00 0x0
				0x4f8 0xc0 0x0
				0x9a4 0x01 0x0
				0xc90 0x00 0x0
				0xc40 0x01 0x0
				0xc48 0x01 0x0
				0xca0 0x11 0x0
				0x048 0x90 0x0
				0xc1c 0xc1 0x0
				0x988 0x88 0x0
				0x998 0x08 0x0
				0x8dc 0x0d 0x0
				0x800 0x00 0x0
				0x844 0x03 0x0>;

		pinctrl-names = "default";
		pinctrl-0 = <&pcie0_clkreq_default
			&pcie0_perst_default
			&pcie0_wake_default>;

		perst-gpio = <&tlmm 57 0>;
		wake-gpio = <&tlmm 53 0>;

		gdsc-vdd-supply = <&gdsc_pcie>;
		vreg-1.8-supply = <&pmxpoorwills_l1>;
		vreg-0.9-supply = <&pmxpoorwills_l4>;
		vreg-cx-supply = <&pmxpoorwills_s5_level>;

		qcom,vreg-1.8-voltage-level = <1200000 1200000 24000>;
		qcom,vreg-0.9-voltage-level = <872000 872000 24000>;
		qcom,vreg-cx-voltage-level = <RPMH_REGULATOR_LEVEL_MAX
						RPMH_REGULATOR_LEVEL_SVS 0>;

		qcom,l0s-supported;
		qcom,l1-supported;
		qcom,l1ss-supported;
		qcom,aux-clk-sync;

		qcom,ep-latency = <10>;

		qcom,slv-addr-space-size = <0x40000000>;

		qcom,phy-status-offset = <0x814>;

		qcom,cpl-timeout = <0x2>;

		qcom,boot-option = <0x1>;

		linux,pci-domain = <0>;

		qcom,use-19p2mhz-aux-clk;

		qcom,msm-bus,name = "pcie0";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
				<45 512 0 0>,
				<45 512 500 800>;

		clocks = <&clock_gcc GCC_PCIE_PIPE_CLK>,
			<&clock_rpmh RPMH_CXO_CLK>,
			<&clock_gcc GCC_PCIE_AUX_CLK>,
			<&clock_gcc GCC_PCIE_CFG_AHB_CLK>,
			<&clock_gcc GCC_PCIE_MSTR_AXI_CLK>,
			<&clock_gcc GCC_PCIE_SLV_AXI_CLK>,
			<&clock_gcc GCC_PCIE_0_CLKREF_CLK>,
			<&clock_gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
			<&clock_gcc GCC_PCIE_SLEEP_CLK>,
			<&clock_gcc GCC_PCIE_PHY_REFGEN_CLK>;

		clock-names = "pcie_0_pipe_clk", "pcie_0_ref_clk_src",
				"pcie_0_aux_clk", "pcie_0_cfg_ahb_clk",
				"pcie_0_mstr_axi_clk", "pcie_0_slv_axi_clk",
				"pcie_0_ldo", "pcie_0_slv_q2a_axi_clk",
				"pcie_0_sleep_clk", "pcie_phy_refgen_clk";

		max-clock-frequency-hz = <0>, <0>, <0>, <0>, <0>, <0>,
					<0>, <0>, <0>, <0>, <100000000>;

		resets = <&clock_gcc GCC_PCIE_BCR>,
			<&clock_gcc GCC_PCIE_PHY_BCR>;

		reset-names = "pcie_0_core_reset",
				"pcie_0_phy_reset";
	};
};