| /* |
| * cpia CPiA driver |
| * |
| * Supports CPiA based Video Camera's. |
| * |
| * (C) Copyright 1999-2000 Peter Pregler |
| * (C) Copyright 1999-2000 Scott J. Bertin |
| * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com> |
| * (C) Copyright 2000 STMicroelectronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */ |
| /* #define _CPIA_DEBUG_ 1 */ |
| |
| #include <linux/config.h> |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/vmalloc.h> |
| #include <linux/slab.h> |
| #include <linux/proc_fs.h> |
| #include <linux/ctype.h> |
| #include <linux/pagemap.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| #include <asm/semaphore.h> |
| |
| #ifdef CONFIG_KMOD |
| #include <linux/kmod.h> |
| #endif |
| |
| #include "cpia.h" |
| |
| #ifdef CONFIG_VIDEO_CPIA_PP |
| extern int cpia_pp_init(void); |
| #endif |
| #ifdef CONFIG_VIDEO_CPIA_USB |
| extern int cpia_usb_init(void); |
| #endif |
| |
| static int video_nr = -1; |
| |
| #ifdef MODULE |
| module_param(video_nr, int, 0); |
| MODULE_AUTHOR("Scott J. Bertin <sbertin@securenym.net> & Peter Pregler <Peter_Pregler@email.com> & Johannes Erdfelt <johannes@erdfeld.com>"); |
| MODULE_DESCRIPTION("V4L-driver for Vision CPiA based cameras"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("video"); |
| #endif |
| |
| static unsigned short colorspace_conv = 0; |
| module_param(colorspace_conv, ushort, 0444); |
| MODULE_PARM_DESC(colorspace_conv, |
| "\n<n> Colorspace conversion:" |
| "\n0 = disable" |
| "\n1 = enable" |
| "\nDefault value is 0" |
| "\n"); |
| |
| #define ABOUT "V4L-Driver for Vision CPiA based cameras" |
| |
| #ifndef VID_HARDWARE_CPIA |
| #define VID_HARDWARE_CPIA 24 /* FIXME -> from linux/videodev.h */ |
| #endif |
| |
| #define CPIA_MODULE_CPIA (0<<5) |
| #define CPIA_MODULE_SYSTEM (1<<5) |
| #define CPIA_MODULE_VP_CTRL (5<<5) |
| #define CPIA_MODULE_CAPTURE (6<<5) |
| #define CPIA_MODULE_DEBUG (7<<5) |
| |
| #define INPUT (DATA_IN << 8) |
| #define OUTPUT (DATA_OUT << 8) |
| |
| #define CPIA_COMMAND_GetCPIAVersion (INPUT | CPIA_MODULE_CPIA | 1) |
| #define CPIA_COMMAND_GetPnPID (INPUT | CPIA_MODULE_CPIA | 2) |
| #define CPIA_COMMAND_GetCameraStatus (INPUT | CPIA_MODULE_CPIA | 3) |
| #define CPIA_COMMAND_GotoHiPower (OUTPUT | CPIA_MODULE_CPIA | 4) |
| #define CPIA_COMMAND_GotoLoPower (OUTPUT | CPIA_MODULE_CPIA | 5) |
| #define CPIA_COMMAND_GotoSuspend (OUTPUT | CPIA_MODULE_CPIA | 7) |
| #define CPIA_COMMAND_GotoPassThrough (OUTPUT | CPIA_MODULE_CPIA | 8) |
| #define CPIA_COMMAND_ModifyCameraStatus (OUTPUT | CPIA_MODULE_CPIA | 10) |
| |
| #define CPIA_COMMAND_ReadVCRegs (INPUT | CPIA_MODULE_SYSTEM | 1) |
| #define CPIA_COMMAND_WriteVCReg (OUTPUT | CPIA_MODULE_SYSTEM | 2) |
| #define CPIA_COMMAND_ReadMCPorts (INPUT | CPIA_MODULE_SYSTEM | 3) |
| #define CPIA_COMMAND_WriteMCPort (OUTPUT | CPIA_MODULE_SYSTEM | 4) |
| #define CPIA_COMMAND_SetBaudRate (OUTPUT | CPIA_MODULE_SYSTEM | 5) |
| #define CPIA_COMMAND_SetECPTiming (OUTPUT | CPIA_MODULE_SYSTEM | 6) |
| #define CPIA_COMMAND_ReadIDATA (INPUT | CPIA_MODULE_SYSTEM | 7) |
| #define CPIA_COMMAND_WriteIDATA (OUTPUT | CPIA_MODULE_SYSTEM | 8) |
| #define CPIA_COMMAND_GenericCall (OUTPUT | CPIA_MODULE_SYSTEM | 9) |
| #define CPIA_COMMAND_I2CStart (OUTPUT | CPIA_MODULE_SYSTEM | 10) |
| #define CPIA_COMMAND_I2CStop (OUTPUT | CPIA_MODULE_SYSTEM | 11) |
| #define CPIA_COMMAND_I2CWrite (OUTPUT | CPIA_MODULE_SYSTEM | 12) |
| #define CPIA_COMMAND_I2CRead (INPUT | CPIA_MODULE_SYSTEM | 13) |
| |
| #define CPIA_COMMAND_GetVPVersion (INPUT | CPIA_MODULE_VP_CTRL | 1) |
| #define CPIA_COMMAND_ResetFrameCounter (INPUT | CPIA_MODULE_VP_CTRL | 2) |
| #define CPIA_COMMAND_SetColourParams (OUTPUT | CPIA_MODULE_VP_CTRL | 3) |
| #define CPIA_COMMAND_SetExposure (OUTPUT | CPIA_MODULE_VP_CTRL | 4) |
| #define CPIA_COMMAND_SetColourBalance (OUTPUT | CPIA_MODULE_VP_CTRL | 6) |
| #define CPIA_COMMAND_SetSensorFPS (OUTPUT | CPIA_MODULE_VP_CTRL | 7) |
| #define CPIA_COMMAND_SetVPDefaults (OUTPUT | CPIA_MODULE_VP_CTRL | 8) |
| #define CPIA_COMMAND_SetApcor (OUTPUT | CPIA_MODULE_VP_CTRL | 9) |
| #define CPIA_COMMAND_SetFlickerCtrl (OUTPUT | CPIA_MODULE_VP_CTRL | 10) |
| #define CPIA_COMMAND_SetVLOffset (OUTPUT | CPIA_MODULE_VP_CTRL | 11) |
| #define CPIA_COMMAND_GetColourParams (INPUT | CPIA_MODULE_VP_CTRL | 16) |
| #define CPIA_COMMAND_GetColourBalance (INPUT | CPIA_MODULE_VP_CTRL | 17) |
| #define CPIA_COMMAND_GetExposure (INPUT | CPIA_MODULE_VP_CTRL | 18) |
| #define CPIA_COMMAND_SetSensorMatrix (OUTPUT | CPIA_MODULE_VP_CTRL | 19) |
| #define CPIA_COMMAND_ColourBars (OUTPUT | CPIA_MODULE_VP_CTRL | 25) |
| #define CPIA_COMMAND_ReadVPRegs (INPUT | CPIA_MODULE_VP_CTRL | 30) |
| #define CPIA_COMMAND_WriteVPReg (OUTPUT | CPIA_MODULE_VP_CTRL | 31) |
| |
| #define CPIA_COMMAND_GrabFrame (OUTPUT | CPIA_MODULE_CAPTURE | 1) |
| #define CPIA_COMMAND_UploadFrame (OUTPUT | CPIA_MODULE_CAPTURE | 2) |
| #define CPIA_COMMAND_SetGrabMode (OUTPUT | CPIA_MODULE_CAPTURE | 3) |
| #define CPIA_COMMAND_InitStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 4) |
| #define CPIA_COMMAND_FiniStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 5) |
| #define CPIA_COMMAND_StartStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 6) |
| #define CPIA_COMMAND_EndStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 7) |
| #define CPIA_COMMAND_SetFormat (OUTPUT | CPIA_MODULE_CAPTURE | 8) |
| #define CPIA_COMMAND_SetROI (OUTPUT | CPIA_MODULE_CAPTURE | 9) |
| #define CPIA_COMMAND_SetCompression (OUTPUT | CPIA_MODULE_CAPTURE | 10) |
| #define CPIA_COMMAND_SetCompressionTarget (OUTPUT | CPIA_MODULE_CAPTURE | 11) |
| #define CPIA_COMMAND_SetYUVThresh (OUTPUT | CPIA_MODULE_CAPTURE | 12) |
| #define CPIA_COMMAND_SetCompressionParams (OUTPUT | CPIA_MODULE_CAPTURE | 13) |
| #define CPIA_COMMAND_DiscardFrame (OUTPUT | CPIA_MODULE_CAPTURE | 14) |
| #define CPIA_COMMAND_GrabReset (OUTPUT | CPIA_MODULE_CAPTURE | 15) |
| |
| #define CPIA_COMMAND_OutputRS232 (OUTPUT | CPIA_MODULE_DEBUG | 1) |
| #define CPIA_COMMAND_AbortProcess (OUTPUT | CPIA_MODULE_DEBUG | 4) |
| #define CPIA_COMMAND_SetDramPage (OUTPUT | CPIA_MODULE_DEBUG | 5) |
| #define CPIA_COMMAND_StartDramUpload (OUTPUT | CPIA_MODULE_DEBUG | 6) |
| #define CPIA_COMMAND_StartDummyDtream (OUTPUT | CPIA_MODULE_DEBUG | 8) |
| #define CPIA_COMMAND_AbortStream (OUTPUT | CPIA_MODULE_DEBUG | 9) |
| #define CPIA_COMMAND_DownloadDRAM (OUTPUT | CPIA_MODULE_DEBUG | 10) |
| #define CPIA_COMMAND_Null (OUTPUT | CPIA_MODULE_DEBUG | 11) |
| |
| enum { |
| FRAME_READY, /* Ready to grab into */ |
| FRAME_GRABBING, /* In the process of being grabbed into */ |
| FRAME_DONE, /* Finished grabbing, but not been synced yet */ |
| FRAME_UNUSED, /* Unused (no MCAPTURE) */ |
| }; |
| |
| #define COMMAND_NONE 0x0000 |
| #define COMMAND_SETCOMPRESSION 0x0001 |
| #define COMMAND_SETCOMPRESSIONTARGET 0x0002 |
| #define COMMAND_SETCOLOURPARAMS 0x0004 |
| #define COMMAND_SETFORMAT 0x0008 |
| #define COMMAND_PAUSE 0x0010 |
| #define COMMAND_RESUME 0x0020 |
| #define COMMAND_SETYUVTHRESH 0x0040 |
| #define COMMAND_SETECPTIMING 0x0080 |
| #define COMMAND_SETCOMPRESSIONPARAMS 0x0100 |
| #define COMMAND_SETEXPOSURE 0x0200 |
| #define COMMAND_SETCOLOURBALANCE 0x0400 |
| #define COMMAND_SETSENSORFPS 0x0800 |
| #define COMMAND_SETAPCOR 0x1000 |
| #define COMMAND_SETFLICKERCTRL 0x2000 |
| #define COMMAND_SETVLOFFSET 0x4000 |
| #define COMMAND_SETLIGHTS 0x8000 |
| |
| #define ROUND_UP_EXP_FOR_FLICKER 15 |
| |
| /* Constants for automatic frame rate adjustment */ |
| #define MAX_EXP 302 |
| #define MAX_EXP_102 255 |
| #define LOW_EXP 140 |
| #define VERY_LOW_EXP 70 |
| #define TC 94 |
| #define EXP_ACC_DARK 50 |
| #define EXP_ACC_LIGHT 90 |
| #define HIGH_COMP_102 160 |
| #define MAX_COMP 239 |
| #define DARK_TIME 3 |
| #define LIGHT_TIME 3 |
| |
| /* Maximum number of 10ms loops to wait for the stream to become ready */ |
| #define READY_TIMEOUT 100 |
| |
| /* Developer's Guide Table 5 p 3-34 |
| * indexed by [mains][sensorFps.baserate][sensorFps.divisor]*/ |
| static u8 flicker_jumps[2][2][4] = |
| { { { 76, 38, 19, 9 }, { 92, 46, 23, 11 } }, |
| { { 64, 32, 16, 8 }, { 76, 38, 19, 9} } |
| }; |
| |
| /* forward declaration of local function */ |
| static void reset_camera_struct(struct cam_data *cam); |
| static int find_over_exposure(int brightness); |
| static void set_flicker(struct cam_params *params, volatile u32 *command_flags, |
| int on); |
| |
| |
| /********************************************************************** |
| * |
| * Memory management |
| * |
| **********************************************************************/ |
| static void *rvmalloc(unsigned long size) |
| { |
| void *mem; |
| unsigned long adr; |
| |
| size = PAGE_ALIGN(size); |
| mem = vmalloc_32(size); |
| if (!mem) |
| return NULL; |
| |
| memset(mem, 0, size); /* Clear the ram out, no junk to the user */ |
| adr = (unsigned long) mem; |
| while (size > 0) { |
| SetPageReserved(vmalloc_to_page((void *)adr)); |
| adr += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| |
| return mem; |
| } |
| |
| static void rvfree(void *mem, unsigned long size) |
| { |
| unsigned long adr; |
| |
| if (!mem) |
| return; |
| |
| adr = (unsigned long) mem; |
| while ((long) size > 0) { |
| ClearPageReserved(vmalloc_to_page((void *)adr)); |
| adr += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| vfree(mem); |
| } |
| |
| /********************************************************************** |
| * |
| * /proc interface |
| * |
| **********************************************************************/ |
| #ifdef CONFIG_PROC_FS |
| static struct proc_dir_entry *cpia_proc_root=NULL; |
| |
| static int cpia_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| char *out = page; |
| int len, tmp; |
| struct cam_data *cam = data; |
| char tmpstr[29]; |
| |
| /* IMPORTANT: This output MUST be kept under PAGE_SIZE |
| * or we need to get more sophisticated. */ |
| |
| out += sprintf(out, "read-only\n-----------------------\n"); |
| out += sprintf(out, "V4L Driver version: %d.%d.%d\n", |
| CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER); |
| out += sprintf(out, "CPIA Version: %d.%02d (%d.%d)\n", |
| cam->params.version.firmwareVersion, |
| cam->params.version.firmwareRevision, |
| cam->params.version.vcVersion, |
| cam->params.version.vcRevision); |
| out += sprintf(out, "CPIA PnP-ID: %04x:%04x:%04x\n", |
| cam->params.pnpID.vendor, cam->params.pnpID.product, |
| cam->params.pnpID.deviceRevision); |
| out += sprintf(out, "VP-Version: %d.%d %04x\n", |
| cam->params.vpVersion.vpVersion, |
| cam->params.vpVersion.vpRevision, |
| cam->params.vpVersion.cameraHeadID); |
| |
| out += sprintf(out, "system_state: %#04x\n", |
| cam->params.status.systemState); |
| out += sprintf(out, "grab_state: %#04x\n", |
| cam->params.status.grabState); |
| out += sprintf(out, "stream_state: %#04x\n", |
| cam->params.status.streamState); |
| out += sprintf(out, "fatal_error: %#04x\n", |
| cam->params.status.fatalError); |
| out += sprintf(out, "cmd_error: %#04x\n", |
| cam->params.status.cmdError); |
| out += sprintf(out, "debug_flags: %#04x\n", |
| cam->params.status.debugFlags); |
| out += sprintf(out, "vp_status: %#04x\n", |
| cam->params.status.vpStatus); |
| out += sprintf(out, "error_code: %#04x\n", |
| cam->params.status.errorCode); |
| /* QX3 specific entries */ |
| if (cam->params.qx3.qx3_detected) { |
| out += sprintf(out, "button: %4d\n", |
| cam->params.qx3.button); |
| out += sprintf(out, "cradled: %4d\n", |
| cam->params.qx3.cradled); |
| } |
| out += sprintf(out, "video_size: %s\n", |
| cam->params.format.videoSize == VIDEOSIZE_CIF ? |
| "CIF " : "QCIF"); |
| out += sprintf(out, "roi: (%3d, %3d) to (%3d, %3d)\n", |
| cam->params.roi.colStart*8, |
| cam->params.roi.rowStart*4, |
| cam->params.roi.colEnd*8, |
| cam->params.roi.rowEnd*4); |
| out += sprintf(out, "actual_fps: %3d\n", cam->fps); |
| out += sprintf(out, "transfer_rate: %4dkB/s\n", |
| cam->transfer_rate); |
| |
| out += sprintf(out, "\nread-write\n"); |
| out += sprintf(out, "----------------------- current min" |
| " max default comment\n"); |
| out += sprintf(out, "brightness: %8d %8d %8d %8d\n", |
| cam->params.colourParams.brightness, 0, 100, 50); |
| if (cam->params.version.firmwareVersion == 1 && |
| cam->params.version.firmwareRevision == 2) |
| /* 1-02 firmware limits contrast to 80 */ |
| tmp = 80; |
| else |
| tmp = 96; |
| |
| out += sprintf(out, "contrast: %8d %8d %8d %8d" |
| " steps of 8\n", |
| cam->params.colourParams.contrast, 0, tmp, 48); |
| out += sprintf(out, "saturation: %8d %8d %8d %8d\n", |
| cam->params.colourParams.saturation, 0, 100, 50); |
| tmp = (25000+5000*cam->params.sensorFps.baserate)/ |
| (1<<cam->params.sensorFps.divisor); |
| out += sprintf(out, "sensor_fps: %4d.%03d %8d %8d %8d\n", |
| tmp/1000, tmp%1000, 3, 30, 15); |
| out += sprintf(out, "stream_start_line: %8d %8d %8d %8d\n", |
| 2*cam->params.streamStartLine, 0, |
| cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144, |
| cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120); |
| out += sprintf(out, "sub_sample: %8s %8s %8s %8s\n", |
| cam->params.format.subSample == SUBSAMPLE_420 ? |
| "420" : "422", "420", "422", "422"); |
| out += sprintf(out, "yuv_order: %8s %8s %8s %8s\n", |
| cam->params.format.yuvOrder == YUVORDER_YUYV ? |
| "YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV"); |
| out += sprintf(out, "ecp_timing: %8s %8s %8s %8s\n", |
| cam->params.ecpTiming ? "slow" : "normal", "slow", |
| "normal", "normal"); |
| |
| if (cam->params.colourBalance.balanceMode == 2) { |
| sprintf(tmpstr, "auto"); |
| } else { |
| sprintf(tmpstr, "manual"); |
| } |
| out += sprintf(out, "color_balance_mode: %8s %8s %8s" |
| " %8s\n", tmpstr, "manual", "auto", "auto"); |
| out += sprintf(out, "red_gain: %8d %8d %8d %8d\n", |
| cam->params.colourBalance.redGain, 0, 212, 32); |
| out += sprintf(out, "green_gain: %8d %8d %8d %8d\n", |
| cam->params.colourBalance.greenGain, 0, 212, 6); |
| out += sprintf(out, "blue_gain: %8d %8d %8d %8d\n", |
| cam->params.colourBalance.blueGain, 0, 212, 92); |
| |
| if (cam->params.version.firmwareVersion == 1 && |
| cam->params.version.firmwareRevision == 2) |
| /* 1-02 firmware limits gain to 2 */ |
| sprintf(tmpstr, "%8d %8d %8d", 1, 2, 2); |
| else |
| sprintf(tmpstr, "%8d %8d %8d", 1, 8, 2); |
| |
| if (cam->params.exposure.gainMode == 0) |
| out += sprintf(out, "max_gain: unknown %28s" |
| " powers of 2\n", tmpstr); |
| else |
| out += sprintf(out, "max_gain: %8d %28s" |
| " 1,2,4 or 8 \n", |
| 1<<(cam->params.exposure.gainMode-1), tmpstr); |
| |
| switch(cam->params.exposure.expMode) { |
| case 1: |
| case 3: |
| sprintf(tmpstr, "manual"); |
| break; |
| case 2: |
| sprintf(tmpstr, "auto"); |
| break; |
| default: |
| sprintf(tmpstr, "unknown"); |
| break; |
| } |
| out += sprintf(out, "exposure_mode: %8s %8s %8s" |
| " %8s\n", tmpstr, "manual", "auto", "auto"); |
| out += sprintf(out, "centre_weight: %8s %8s %8s %8s\n", |
| (2-cam->params.exposure.centreWeight) ? "on" : "off", |
| "off", "on", "on"); |
| out += sprintf(out, "gain: %8d %8d max_gain %8d 1,2,4,8 possible\n", |
| 1<<cam->params.exposure.gain, 1, 1); |
| if (cam->params.version.firmwareVersion == 1 && |
| cam->params.version.firmwareRevision == 2) |
| /* 1-02 firmware limits fineExp/2 to 127 */ |
| tmp = 254; |
| else |
| tmp = 510; |
| |
| out += sprintf(out, "fine_exp: %8d %8d %8d %8d\n", |
| cam->params.exposure.fineExp*2, 0, tmp, 0); |
| if (cam->params.version.firmwareVersion == 1 && |
| cam->params.version.firmwareRevision == 2) |
| /* 1-02 firmware limits coarseExpHi to 0 */ |
| tmp = MAX_EXP_102; |
| else |
| tmp = MAX_EXP; |
| |
| out += sprintf(out, "coarse_exp: %8d %8d %8d" |
| " %8d\n", cam->params.exposure.coarseExpLo+ |
| 256*cam->params.exposure.coarseExpHi, 0, tmp, 185); |
| out += sprintf(out, "red_comp: %8d %8d %8d %8d\n", |
| cam->params.exposure.redComp, COMP_RED, 255, COMP_RED); |
| out += sprintf(out, "green1_comp: %8d %8d %8d %8d\n", |
| cam->params.exposure.green1Comp, COMP_GREEN1, 255, |
| COMP_GREEN1); |
| out += sprintf(out, "green2_comp: %8d %8d %8d %8d\n", |
| cam->params.exposure.green2Comp, COMP_GREEN2, 255, |
| COMP_GREEN2); |
| out += sprintf(out, "blue_comp: %8d %8d %8d %8d\n", |
| cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE); |
| |
| out += sprintf(out, "apcor_gain1: %#8x %#8x %#8x %#8x\n", |
| cam->params.apcor.gain1, 0, 0xff, 0x1c); |
| out += sprintf(out, "apcor_gain2: %#8x %#8x %#8x %#8x\n", |
| cam->params.apcor.gain2, 0, 0xff, 0x1a); |
| out += sprintf(out, "apcor_gain4: %#8x %#8x %#8x %#8x\n", |
| cam->params.apcor.gain4, 0, 0xff, 0x2d); |
| out += sprintf(out, "apcor_gain8: %#8x %#8x %#8x %#8x\n", |
| cam->params.apcor.gain8, 0, 0xff, 0x2a); |
| out += sprintf(out, "vl_offset_gain1: %8d %8d %8d %8d\n", |
| cam->params.vlOffset.gain1, 0, 255, 24); |
| out += sprintf(out, "vl_offset_gain2: %8d %8d %8d %8d\n", |
| cam->params.vlOffset.gain2, 0, 255, 28); |
| out += sprintf(out, "vl_offset_gain4: %8d %8d %8d %8d\n", |
| cam->params.vlOffset.gain4, 0, 255, 30); |
| out += sprintf(out, "vl_offset_gain8: %8d %8d %8d %8d\n", |
| cam->params.vlOffset.gain8, 0, 255, 30); |
| out += sprintf(out, "flicker_control: %8s %8s %8s %8s\n", |
| cam->params.flickerControl.flickerMode ? "on" : "off", |
| "off", "on", "off"); |
| out += sprintf(out, "mains_frequency: %8d %8d %8d %8d" |
| " only 50/60\n", |
| cam->mainsFreq ? 60 : 50, 50, 60, 50); |
| if(cam->params.flickerControl.allowableOverExposure < 0) |
| out += sprintf(out, "allowable_overexposure: %4dauto auto %8d auto\n", |
| -cam->params.flickerControl.allowableOverExposure, |
| 255); |
| else |
| out += sprintf(out, "allowable_overexposure: %8d auto %8d auto\n", |
| cam->params.flickerControl.allowableOverExposure, |
| 255); |
| out += sprintf(out, "compression_mode: "); |
| switch(cam->params.compression.mode) { |
| case CPIA_COMPRESSION_NONE: |
| out += sprintf(out, "%8s", "none"); |
| break; |
| case CPIA_COMPRESSION_AUTO: |
| out += sprintf(out, "%8s", "auto"); |
| break; |
| case CPIA_COMPRESSION_MANUAL: |
| out += sprintf(out, "%8s", "manual"); |
| break; |
| default: |
| out += sprintf(out, "%8s", "unknown"); |
| break; |
| } |
| out += sprintf(out, " none,auto,manual auto\n"); |
| out += sprintf(out, "decimation_enable: %8s %8s %8s %8s\n", |
| cam->params.compression.decimation == |
| DECIMATION_ENAB ? "on":"off", "off", "on", |
| "off"); |
| out += sprintf(out, "compression_target: %9s %9s %9s %9s\n", |
| cam->params.compressionTarget.frTargeting == |
| CPIA_COMPRESSION_TARGET_FRAMERATE ? |
| "framerate":"quality", |
| "framerate", "quality", "quality"); |
| out += sprintf(out, "target_framerate: %8d %8d %8d %8d\n", |
| cam->params.compressionTarget.targetFR, 1, 30, 15); |
| out += sprintf(out, "target_quality: %8d %8d %8d %8d\n", |
| cam->params.compressionTarget.targetQ, 1, 64, 5); |
| out += sprintf(out, "y_threshold: %8d %8d %8d %8d\n", |
| cam->params.yuvThreshold.yThreshold, 0, 31, 6); |
| out += sprintf(out, "uv_threshold: %8d %8d %8d %8d\n", |
| cam->params.yuvThreshold.uvThreshold, 0, 31, 6); |
| out += sprintf(out, "hysteresis: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.hysteresis, 0, 255, 3); |
| out += sprintf(out, "threshold_max: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.threshMax, 0, 255, 11); |
| out += sprintf(out, "small_step: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.smallStep, 0, 255, 1); |
| out += sprintf(out, "large_step: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.largeStep, 0, 255, 3); |
| out += sprintf(out, "decimation_hysteresis: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.decimationHysteresis, |
| 0, 255, 2); |
| out += sprintf(out, "fr_diff_step_thresh: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.frDiffStepThresh, |
| 0, 255, 5); |
| out += sprintf(out, "q_diff_step_thresh: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.qDiffStepThresh, |
| 0, 255, 3); |
| out += sprintf(out, "decimation_thresh_mod: %8d %8d %8d %8d\n", |
| cam->params.compressionParams.decimationThreshMod, |
| 0, 255, 2); |
| /* QX3 specific entries */ |
| if (cam->params.qx3.qx3_detected) { |
| out += sprintf(out, "toplight: %8s %8s %8s %8s\n", |
| cam->params.qx3.toplight ? "on" : "off", |
| "off", "on", "off"); |
| out += sprintf(out, "bottomlight: %8s %8s %8s %8s\n", |
| cam->params.qx3.bottomlight ? "on" : "off", |
| "off", "on", "off"); |
| } |
| |
| len = out - page; |
| len -= off; |
| if (len < count) { |
| *eof = 1; |
| if (len <= 0) return 0; |
| } else |
| len = count; |
| |
| *start = page + off; |
| return len; |
| } |
| |
| |
| static int match(char *checkstr, char **buffer, unsigned long *count, |
| int *find_colon, int *err) |
| { |
| int ret, colon_found = 1; |
| int len = strlen(checkstr); |
| ret = (len <= *count && strncmp(*buffer, checkstr, len) == 0); |
| if (ret) { |
| *buffer += len; |
| *count -= len; |
| if (*find_colon) { |
| colon_found = 0; |
| while (*count && (**buffer == ' ' || **buffer == '\t' || |
| (!colon_found && **buffer == ':'))) { |
| if (**buffer == ':') |
| colon_found = 1; |
| --*count; |
| ++*buffer; |
| } |
| if (!*count || !colon_found) |
| *err = -EINVAL; |
| *find_colon = 0; |
| } |
| } |
| return ret; |
| } |
| |
| static unsigned long int value(char **buffer, unsigned long *count, int *err) |
| { |
| char *p; |
| unsigned long int ret; |
| ret = simple_strtoul(*buffer, &p, 0); |
| if (p == *buffer) |
| *err = -EINVAL; |
| else { |
| *count -= p - *buffer; |
| *buffer = p; |
| } |
| return ret; |
| } |
| |
| static int cpia_write_proc(struct file *file, const char __user *buf, |
| unsigned long count, void *data) |
| { |
| struct cam_data *cam = data; |
| struct cam_params new_params; |
| char *page, *buffer; |
| int retval, find_colon; |
| int size = count; |
| unsigned long val = 0; |
| u32 command_flags = 0; |
| u8 new_mains; |
| |
| /* |
| * This code to copy from buf to page is shamelessly copied |
| * from the comx driver |
| */ |
| if (count > PAGE_SIZE) { |
| printk(KERN_ERR "count is %lu > %d!!!\n", count, (int)PAGE_SIZE); |
| return -ENOSPC; |
| } |
| |
| if (!(page = (char *)__get_free_page(GFP_KERNEL))) return -ENOMEM; |
| |
| if(copy_from_user(page, buf, count)) |
| { |
| retval = -EFAULT; |
| goto out; |
| } |
| |
| if (page[count-1] == '\n') |
| page[count-1] = '\0'; |
| else if (count < PAGE_SIZE) |
| page[count] = '\0'; |
| else if (page[count]) { |
| retval = -EINVAL; |
| goto out; |
| } |
| |
| buffer = page; |
| |
| if (down_interruptible(&cam->param_lock)) |
| return -ERESTARTSYS; |
| |
| /* |
| * Skip over leading whitespace |
| */ |
| while (count && isspace(*buffer)) { |
| --count; |
| ++buffer; |
| } |
| |
| memcpy(&new_params, &cam->params, sizeof(struct cam_params)); |
| new_mains = cam->mainsFreq; |
| |
| #define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval)) |
| #define VALUE (value(&buffer,&count, &retval)) |
| #define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \ |
| new_params.version.firmwareRevision == (y)) |
| |
| retval = 0; |
| while (count && !retval) { |
| find_colon = 1; |
| if (MATCH("brightness")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 100) |
| new_params.colourParams.brightness = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOLOURPARAMS; |
| if(new_params.flickerControl.allowableOverExposure < 0) |
| new_params.flickerControl.allowableOverExposure = |
| -find_over_exposure(new_params.colourParams.brightness); |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| |
| } else if (MATCH("contrast")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 100) { |
| /* contrast is in steps of 8, so round*/ |
| val = ((val + 3) / 8) * 8; |
| /* 1-02 firmware limits contrast to 80*/ |
| if (FIRMWARE_VERSION(1,2) && val > 80) |
| val = 80; |
| |
| new_params.colourParams.contrast = val; |
| } else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOLOURPARAMS; |
| } else if (MATCH("saturation")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 100) |
| new_params.colourParams.saturation = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOLOURPARAMS; |
| } else if (MATCH("sensor_fps")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| /* find values so that sensorFPS is minimized, |
| * but >= val */ |
| if (val > 30) |
| retval = -EINVAL; |
| else if (val > 25) { |
| new_params.sensorFps.divisor = 0; |
| new_params.sensorFps.baserate = 1; |
| } else if (val > 15) { |
| new_params.sensorFps.divisor = 0; |
| new_params.sensorFps.baserate = 0; |
| } else if (val > 12) { |
| new_params.sensorFps.divisor = 1; |
| new_params.sensorFps.baserate = 1; |
| } else if (val > 7) { |
| new_params.sensorFps.divisor = 1; |
| new_params.sensorFps.baserate = 0; |
| } else if (val > 6) { |
| new_params.sensorFps.divisor = 2; |
| new_params.sensorFps.baserate = 1; |
| } else if (val > 3) { |
| new_params.sensorFps.divisor = 2; |
| new_params.sensorFps.baserate = 0; |
| } else { |
| new_params.sensorFps.divisor = 3; |
| /* Either base rate would work here */ |
| new_params.sensorFps.baserate = 1; |
| } |
| new_params.flickerControl.coarseJump = |
| flicker_jumps[new_mains] |
| [new_params.sensorFps.baserate] |
| [new_params.sensorFps.divisor]; |
| if (new_params.flickerControl.flickerMode) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } |
| command_flags |= COMMAND_SETSENSORFPS; |
| cam->exposure_status = EXPOSURE_NORMAL; |
| } else if (MATCH("stream_start_line")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| int max_line = 288; |
| |
| if (new_params.format.videoSize == VIDEOSIZE_QCIF) |
| max_line = 144; |
| if (val <= max_line) |
| new_params.streamStartLine = val/2; |
| else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("sub_sample")) { |
| if (!retval && MATCH("420")) |
| new_params.format.subSample = SUBSAMPLE_420; |
| else if (!retval && MATCH("422")) |
| new_params.format.subSample = SUBSAMPLE_422; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETFORMAT; |
| } else if (MATCH("yuv_order")) { |
| if (!retval && MATCH("YUYV")) |
| new_params.format.yuvOrder = YUVORDER_YUYV; |
| else if (!retval && MATCH("UYVY")) |
| new_params.format.yuvOrder = YUVORDER_UYVY; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETFORMAT; |
| } else if (MATCH("ecp_timing")) { |
| if (!retval && MATCH("normal")) |
| new_params.ecpTiming = 0; |
| else if (!retval && MATCH("slow")) |
| new_params.ecpTiming = 1; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETECPTIMING; |
| } else if (MATCH("color_balance_mode")) { |
| if (!retval && MATCH("manual")) |
| new_params.colourBalance.balanceMode = 3; |
| else if (!retval && MATCH("auto")) |
| new_params.colourBalance.balanceMode = 2; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETCOLOURBALANCE; |
| } else if (MATCH("red_gain")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 212) { |
| new_params.colourBalance.redGain = val; |
| new_params.colourBalance.balanceMode = 1; |
| } else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOLOURBALANCE; |
| } else if (MATCH("green_gain")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 212) { |
| new_params.colourBalance.greenGain = val; |
| new_params.colourBalance.balanceMode = 1; |
| } else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOLOURBALANCE; |
| } else if (MATCH("blue_gain")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 212) { |
| new_params.colourBalance.blueGain = val; |
| new_params.colourBalance.balanceMode = 1; |
| } else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOLOURBALANCE; |
| } else if (MATCH("max_gain")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| /* 1-02 firmware limits gain to 2 */ |
| if (FIRMWARE_VERSION(1,2) && val > 2) |
| val = 2; |
| switch(val) { |
| case 1: |
| new_params.exposure.gainMode = 1; |
| break; |
| case 2: |
| new_params.exposure.gainMode = 2; |
| break; |
| case 4: |
| new_params.exposure.gainMode = 3; |
| break; |
| case 8: |
| new_params.exposure.gainMode = 4; |
| break; |
| default: |
| retval = -EINVAL; |
| break; |
| } |
| } |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else if (MATCH("exposure_mode")) { |
| if (!retval && MATCH("auto")) |
| new_params.exposure.expMode = 2; |
| else if (!retval && MATCH("manual")) { |
| if (new_params.exposure.expMode == 2) |
| new_params.exposure.expMode = 3; |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| new_params.flickerControl.flickerMode = 0; |
| } else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else if (MATCH("centre_weight")) { |
| if (!retval && MATCH("on")) |
| new_params.exposure.centreWeight = 1; |
| else if (!retval && MATCH("off")) |
| new_params.exposure.centreWeight = 2; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else if (MATCH("gain")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| switch(val) { |
| case 1: |
| new_params.exposure.gain = 0; |
| break; |
| case 2: |
| new_params.exposure.gain = 1; |
| break; |
| case 4: |
| new_params.exposure.gain = 2; |
| break; |
| case 8: |
| new_params.exposure.gain = 3; |
| break; |
| default: |
| retval = -EINVAL; |
| break; |
| } |
| new_params.exposure.expMode = 1; |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| new_params.flickerControl.flickerMode = 0; |
| command_flags |= COMMAND_SETEXPOSURE; |
| if (new_params.exposure.gain > |
| new_params.exposure.gainMode-1) |
| retval = -EINVAL; |
| } |
| } else if (MATCH("fine_exp")) { |
| if (!retval) |
| val = VALUE/2; |
| |
| if (!retval) { |
| if (val < 256) { |
| /* 1-02 firmware limits fineExp/2 to 127*/ |
| if (FIRMWARE_VERSION(1,2) && val > 127) |
| val = 127; |
| new_params.exposure.fineExp = val; |
| new_params.exposure.expMode = 1; |
| command_flags |= COMMAND_SETEXPOSURE; |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| new_params.flickerControl.flickerMode = 0; |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("coarse_exp")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= MAX_EXP) { |
| if (FIRMWARE_VERSION(1,2) && |
| val > MAX_EXP_102) |
| val = MAX_EXP_102; |
| new_params.exposure.coarseExpLo = |
| val & 0xff; |
| new_params.exposure.coarseExpHi = |
| val >> 8; |
| new_params.exposure.expMode = 1; |
| command_flags |= COMMAND_SETEXPOSURE; |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| new_params.flickerControl.flickerMode = 0; |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("red_comp")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val >= COMP_RED && val <= 255) { |
| new_params.exposure.redComp = val; |
| new_params.exposure.compMode = 1; |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("green1_comp")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val >= COMP_GREEN1 && val <= 255) { |
| new_params.exposure.green1Comp = val; |
| new_params.exposure.compMode = 1; |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("green2_comp")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val >= COMP_GREEN2 && val <= 255) { |
| new_params.exposure.green2Comp = val; |
| new_params.exposure.compMode = 1; |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("blue_comp")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val >= COMP_BLUE && val <= 255) { |
| new_params.exposure.blueComp = val; |
| new_params.exposure.compMode = 1; |
| command_flags |= COMMAND_SETEXPOSURE; |
| } else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("apcor_gain1")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| command_flags |= COMMAND_SETAPCOR; |
| if (val <= 0xff) |
| new_params.apcor.gain1 = val; |
| else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("apcor_gain2")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| command_flags |= COMMAND_SETAPCOR; |
| if (val <= 0xff) |
| new_params.apcor.gain2 = val; |
| else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("apcor_gain4")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| command_flags |= COMMAND_SETAPCOR; |
| if (val <= 0xff) |
| new_params.apcor.gain4 = val; |
| else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("apcor_gain8")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| command_flags |= COMMAND_SETAPCOR; |
| if (val <= 0xff) |
| new_params.apcor.gain8 = val; |
| else |
| retval = -EINVAL; |
| } |
| } else if (MATCH("vl_offset_gain1")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.vlOffset.gain1 = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETVLOFFSET; |
| } else if (MATCH("vl_offset_gain2")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.vlOffset.gain2 = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETVLOFFSET; |
| } else if (MATCH("vl_offset_gain4")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.vlOffset.gain4 = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETVLOFFSET; |
| } else if (MATCH("vl_offset_gain8")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.vlOffset.gain8 = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETVLOFFSET; |
| } else if (MATCH("flicker_control")) { |
| if (!retval && MATCH("on")) { |
| set_flicker(&new_params, &command_flags, 1); |
| } else if (!retval && MATCH("off")) { |
| set_flicker(&new_params, &command_flags, 0); |
| } else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else if (MATCH("mains_frequency")) { |
| if (!retval && MATCH("50")) { |
| new_mains = 0; |
| new_params.flickerControl.coarseJump = |
| flicker_jumps[new_mains] |
| [new_params.sensorFps.baserate] |
| [new_params.sensorFps.divisor]; |
| if (new_params.flickerControl.flickerMode) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else if (!retval && MATCH("60")) { |
| new_mains = 1; |
| new_params.flickerControl.coarseJump = |
| flicker_jumps[new_mains] |
| [new_params.sensorFps.baserate] |
| [new_params.sensorFps.divisor]; |
| if (new_params.flickerControl.flickerMode) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else |
| retval = -EINVAL; |
| } else if (MATCH("allowable_overexposure")) { |
| if (!retval && MATCH("auto")) { |
| new_params.flickerControl.allowableOverExposure = |
| -find_over_exposure(new_params.colourParams.brightness); |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) { |
| new_params.flickerControl. |
| allowableOverExposure = val; |
| if(new_params.flickerControl.flickerMode != 0) |
| command_flags |= COMMAND_SETFLICKERCTRL; |
| } else |
| retval = -EINVAL; |
| } |
| } |
| } else if (MATCH("compression_mode")) { |
| if (!retval && MATCH("none")) |
| new_params.compression.mode = |
| CPIA_COMPRESSION_NONE; |
| else if (!retval && MATCH("auto")) |
| new_params.compression.mode = |
| CPIA_COMPRESSION_AUTO; |
| else if (!retval && MATCH("manual")) |
| new_params.compression.mode = |
| CPIA_COMPRESSION_MANUAL; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETCOMPRESSION; |
| } else if (MATCH("decimation_enable")) { |
| if (!retval && MATCH("off")) |
| new_params.compression.decimation = 0; |
| else if (!retval && MATCH("on")) |
| new_params.compression.decimation = 1; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETCOMPRESSION; |
| } else if (MATCH("compression_target")) { |
| if (!retval && MATCH("quality")) |
| new_params.compressionTarget.frTargeting = |
| CPIA_COMPRESSION_TARGET_QUALITY; |
| else if (!retval && MATCH("framerate")) |
| new_params.compressionTarget.frTargeting = |
| CPIA_COMPRESSION_TARGET_FRAMERATE; |
| else |
| retval = -EINVAL; |
| |
| command_flags |= COMMAND_SETCOMPRESSIONTARGET; |
| } else if (MATCH("target_framerate")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if(val > 0 && val <= 30) |
| new_params.compressionTarget.targetFR = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONTARGET; |
| } else if (MATCH("target_quality")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if(val > 0 && val <= 64) |
| new_params.compressionTarget.targetQ = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONTARGET; |
| } else if (MATCH("y_threshold")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val < 32) |
| new_params.yuvThreshold.yThreshold = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETYUVTHRESH; |
| } else if (MATCH("uv_threshold")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val < 32) |
| new_params.yuvThreshold.uvThreshold = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETYUVTHRESH; |
| } else if (MATCH("hysteresis")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.hysteresis = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("threshold_max")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.threshMax = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("small_step")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.smallStep = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("large_step")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.largeStep = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("decimation_hysteresis")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.decimationHysteresis = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("fr_diff_step_thresh")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.frDiffStepThresh = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("q_diff_step_thresh")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.qDiffStepThresh = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("decimation_thresh_mod")) { |
| if (!retval) |
| val = VALUE; |
| |
| if (!retval) { |
| if (val <= 0xff) |
| new_params.compressionParams.decimationThreshMod = val; |
| else |
| retval = -EINVAL; |
| } |
| command_flags |= COMMAND_SETCOMPRESSIONPARAMS; |
| } else if (MATCH("toplight")) { |
| if (!retval && MATCH("on")) |
| new_params.qx3.toplight = 1; |
| else if (!retval && MATCH("off")) |
| new_params.qx3.toplight = 0; |
| else |
| retval = -EINVAL; |
| command_flags |= COMMAND_SETLIGHTS; |
| } else if (MATCH("bottomlight")) { |
| if (!retval && MATCH("on")) |
| new_params.qx3.bottomlight = 1; |
| else if (!retval && MATCH("off")) |
| new_params.qx3.bottomlight = 0; |
| else |
| retval = -EINVAL; |
| command_flags |= COMMAND_SETLIGHTS; |
| } else { |
| DBG("No match found\n"); |
| retval = -EINVAL; |
| } |
| |
| if (!retval) { |
| while (count && isspace(*buffer) && *buffer != '\n') { |
| --count; |
| ++buffer; |
| } |
| if (count) { |
| if (*buffer == '\0' && count != 1) |
| retval = -EINVAL; |
| else if (*buffer != '\n' && *buffer != ';' && |
| *buffer != '\0') |
| retval = -EINVAL; |
| else { |
| --count; |
| ++buffer; |
| } |
| } |
| } |
| } |
| #undef MATCH |
| #undef VALUE |
| #undef FIRMWARE_VERSION |
| if (!retval) { |
| if (command_flags & COMMAND_SETCOLOURPARAMS) { |
| /* Adjust cam->vp to reflect these changes */ |
| cam->vp.brightness = |
| new_params.colourParams.brightness*65535/100; |
| cam->vp.contrast = |
| new_params.colourParams.contrast*65535/100; |
| cam->vp.colour = |
| new_params.colourParams.saturation*65535/100; |
| } |
| if((command_flags & COMMAND_SETEXPOSURE) && |
| new_params.exposure.expMode == 2) |
| cam->exposure_status = EXPOSURE_NORMAL; |
| |
| memcpy(&cam->params, &new_params, sizeof(struct cam_params)); |
| cam->mainsFreq = new_mains; |
| cam->cmd_queue |= command_flags; |
| retval = size; |
| } else |
| DBG("error: %d\n", retval); |
| |
| up(&cam->param_lock); |
| |
| out: |
| free_page((unsigned long)page); |
| return retval; |
| } |
| |
| static void create_proc_cpia_cam(struct cam_data *cam) |
| { |
| char name[7]; |
| struct proc_dir_entry *ent; |
| |
| if (!cpia_proc_root || !cam) |
| return; |
| |
| sprintf(name, "video%d", cam->vdev.minor); |
| |
| ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root); |
| if (!ent) |
| return; |
| |
| ent->data = cam; |
| ent->read_proc = cpia_read_proc; |
| ent->write_proc = cpia_write_proc; |
| /* |
| size of the proc entry is 3736 bytes for the standard webcam; |
| the extra features of the QX3 microscope add 189 bytes. |
| (we have not yet probed the camera to see which type it is). |
| */ |
| ent->size = 3736 + 189; |
| cam->proc_entry = ent; |
| } |
| |
| static void destroy_proc_cpia_cam(struct cam_data *cam) |
| { |
| char name[7]; |
| |
| if (!cam || !cam->proc_entry) |
| return; |
| |
| sprintf(name, "video%d", cam->vdev.minor); |
| remove_proc_entry(name, cpia_proc_root); |
| cam->proc_entry = NULL; |
| } |
| |
| static void proc_cpia_create(void) |
| { |
| cpia_proc_root = proc_mkdir("cpia", NULL); |
| |
| if (cpia_proc_root) |
| cpia_proc_root->owner = THIS_MODULE; |
| else |
| LOG("Unable to initialise /proc/cpia\n"); |
| } |
| |
| static void __exit proc_cpia_destroy(void) |
| { |
| remove_proc_entry("cpia", NULL); |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* ----------------------- debug functions ---------------------- */ |
| |
| #define printstatus(cam) \ |
| DBG("%02x %02x %02x %02x %02x %02x %02x %02x\n",\ |
| cam->params.status.systemState, cam->params.status.grabState, \ |
| cam->params.status.streamState, cam->params.status.fatalError, \ |
| cam->params.status.cmdError, cam->params.status.debugFlags, \ |
| cam->params.status.vpStatus, cam->params.status.errorCode); |
| |
| /* ----------------------- v4l helpers -------------------------- */ |
| |
| /* supported frame palettes and depths */ |
| static inline int valid_mode(u16 palette, u16 depth) |
| { |
| if ((palette == VIDEO_PALETTE_YUV422 && depth == 16) || |
| (palette == VIDEO_PALETTE_YUYV && depth == 16)) |
| return 1; |
| |
| if (colorspace_conv) |
| return (palette == VIDEO_PALETTE_GREY && depth == 8) || |
| (palette == VIDEO_PALETTE_RGB555 && depth == 16) || |
| (palette == VIDEO_PALETTE_RGB565 && depth == 16) || |
| (palette == VIDEO_PALETTE_RGB24 && depth == 24) || |
| (palette == VIDEO_PALETTE_RGB32 && depth == 32) || |
| (palette == VIDEO_PALETTE_UYVY && depth == 16); |
| |
| return 0; |
| } |
| |
| static int match_videosize( int width, int height ) |
| { |
| /* return the best match, where 'best' is as always |
| * the largest that is not bigger than what is requested. */ |
| if (width>=352 && height>=288) |
| return VIDEOSIZE_352_288; /* CIF */ |
| |
| if (width>=320 && height>=240) |
| return VIDEOSIZE_320_240; /* SIF */ |
| |
| if (width>=288 && height>=216) |
| return VIDEOSIZE_288_216; |
| |
| if (width>=256 && height>=192) |
| return VIDEOSIZE_256_192; |
| |
| if (width>=224 && height>=168) |
| return VIDEOSIZE_224_168; |
| |
| if (width>=192 && height>=144) |
| return VIDEOSIZE_192_144; |
| |
| if (width>=176 && height>=144) |
| return VIDEOSIZE_176_144; /* QCIF */ |
| |
| if (width>=160 && height>=120) |
| return VIDEOSIZE_160_120; /* QSIF */ |
| |
| if (width>=128 && height>=96) |
| return VIDEOSIZE_128_96; |
| |
| if (width>=88 && height>=72) |
| return VIDEOSIZE_88_72; |
| |
| if (width>=64 && height>=48) |
| return VIDEOSIZE_64_48; |
| |
| if (width>=48 && height>=48) |
| return VIDEOSIZE_48_48; |
| |
| return -1; |
| } |
| |
| /* these are the capture sizes we support */ |
| static void set_vw_size(struct cam_data *cam) |
| { |
| /* the col/row/start/end values are the result of simple math */ |
| /* study the SetROI-command in cpia developers guide p 2-22 */ |
| /* streamStartLine is set to the recommended value in the cpia */ |
| /* developers guide p 3-37 */ |
| switch(cam->video_size) { |
| case VIDEOSIZE_CIF: |
| cam->vw.width = 352; |
| cam->vw.height = 288; |
| cam->params.format.videoSize=VIDEOSIZE_CIF; |
| cam->params.roi.colStart=0; |
| cam->params.roi.rowStart=0; |
| cam->params.streamStartLine = 120; |
| break; |
| case VIDEOSIZE_SIF: |
| cam->vw.width = 320; |
| cam->vw.height = 240; |
| cam->params.format.videoSize=VIDEOSIZE_CIF; |
| cam->params.roi.colStart=2; |
| cam->params.roi.rowStart=6; |
| cam->params.streamStartLine = 120; |
| break; |
| case VIDEOSIZE_288_216: |
| cam->vw.width = 288; |
| cam->vw.height = 216; |
| cam->params.format.videoSize=VIDEOSIZE_CIF; |
| cam->params.roi.colStart=4; |
| cam->params.roi.rowStart=9; |
| cam->params.streamStartLine = 120; |
| break; |
| case VIDEOSIZE_256_192: |
| cam->vw.width = 256; |
| cam->vw.height = 192; |
| cam->params.format.videoSize=VIDEOSIZE_CIF; |
| cam->params.roi.colStart=6; |
| cam->params.roi.rowStart=12; |
| cam->params.streamStartLine = 120; |
| break; |
| case VIDEOSIZE_224_168: |
| cam->vw.width = 224; |
| cam->vw.height = 168; |
| cam->params.format.videoSize=VIDEOSIZE_CIF; |
| cam->params.roi.colStart=8; |
| cam->params.roi.rowStart=15; |
| cam->params.streamStartLine = 120; |
| break; |
| case VIDEOSIZE_192_144: |
| cam->vw.width = 192; |
| cam->vw.height = 144; |
| cam->params.format.videoSize=VIDEOSIZE_CIF; |
| cam->params.roi.colStart=10; |
| cam->params.roi.rowStart=18; |
| cam->params.streamStartLine = 120; |
| break; |
| case VIDEOSIZE_QCIF: |
| cam->vw.width = 176; |
| cam->vw.height = 144; |
| cam->params.format.videoSize=VIDEOSIZE_QCIF; |
| cam->params.roi.colStart=0; |
| cam->params.roi.rowStart=0; |
| cam->params.streamStartLine = 60; |
| break; |
| case VIDEOSIZE_QSIF: |
| cam->vw.width = 160; |
| cam->vw.height = 120; |
| cam->params.format.videoSize=VIDEOSIZE_QCIF; |
| cam->params.roi.colStart=1; |
| cam->params.roi.rowStart=3; |
| cam->params.streamStartLine = 60; |
| break; |
| case VIDEOSIZE_128_96: |
| cam->vw.width = 128; |
| cam->vw.height = 96; |
| cam->params.format.videoSize=VIDEOSIZE_QCIF; |
| cam->params.roi.colStart=3; |
| cam->params.roi.rowStart=6; |
| cam->params.streamStartLine = 60; |
| break; |
| case VIDEOSIZE_88_72: |
| cam->vw.width = 88; |
| cam->vw.height = 72; |
| cam->params.format.videoSize=VIDEOSIZE_QCIF; |
| cam->params.roi.colStart=5; |
| cam->params.roi.rowStart=9; |
| cam->params.streamStartLine = 60; |
| break; |
| case VIDEOSIZE_64_48: |
| cam->vw.width = 64; |
| cam->vw.height = 48; |
| cam->params.format.videoSize=VIDEOSIZE_QCIF; |
| cam->params.roi.colStart=7; |
| cam->params.roi.rowStart=12; |
| cam->params.streamStartLine = 60; |
| break; |
| case VIDEOSIZE_48_48: |
| cam->vw.width = 48; |
| cam->vw.height = 48; |
| cam->params.format.videoSize=VIDEOSIZE_QCIF; |
| cam->params.roi.colStart=8; |
| cam->params.roi.rowStart=6; |
| cam->params.streamStartLine = 60; |
| break; |
| default: |
| LOG("bad videosize value: %d\n", cam->video_size); |
| return; |
| } |
| |
| if(cam->vc.width == 0) |
| cam->vc.width = cam->vw.width; |
| if(cam->vc.height == 0) |
| cam->vc.height = cam->vw.height; |
| |
| cam->params.roi.colStart += cam->vc.x >> 3; |
| cam->params.roi.colEnd = cam->params.roi.colStart + |
| (cam->vc.width >> 3); |
| cam->params.roi.rowStart += cam->vc.y >> 2; |
| cam->params.roi.rowEnd = cam->params.roi.rowStart + |
| (cam->vc.height >> 2); |
| |
| return; |
| } |
| |
| static int allocate_frame_buf(struct cam_data *cam) |
| { |
| int i; |
| |
| cam->frame_buf = rvmalloc(FRAME_NUM * CPIA_MAX_FRAME_SIZE); |
| if (!cam->frame_buf) |
| return -ENOBUFS; |
| |
| for (i = 0; i < FRAME_NUM; i++) |
| cam->frame[i].data = cam->frame_buf + i * CPIA_MAX_FRAME_SIZE; |
| |
| return 0; |
| } |
| |
| static int free_frame_buf(struct cam_data *cam) |
| { |
| int i; |
| |
| rvfree(cam->frame_buf, FRAME_NUM*CPIA_MAX_FRAME_SIZE); |
| cam->frame_buf = NULL; |
| for (i=0; i < FRAME_NUM; i++) |
| cam->frame[i].data = NULL; |
| |
| return 0; |
| } |
| |
| |
| static inline void free_frames(struct cpia_frame frame[FRAME_NUM]) |
| { |
| int i; |
| |
| for (i=0; i < FRAME_NUM; i++) |
| frame[i].state = FRAME_UNUSED; |
| return; |
| } |
| |
| /********************************************************************** |
| * |
| * General functions |
| * |
| **********************************************************************/ |
| /* send an arbitrary command to the camera */ |
| static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d) |
| { |
| int retval, datasize; |
| u8 cmd[8], data[8]; |
| |
| switch(command) { |
| case CPIA_COMMAND_GetCPIAVersion: |
| case CPIA_COMMAND_GetPnPID: |
| case CPIA_COMMAND_GetCameraStatus: |
| case CPIA_COMMAND_GetVPVersion: |
| datasize=8; |
| break; |
| case CPIA_COMMAND_GetColourParams: |
| case CPIA_COMMAND_GetColourBalance: |
| case CPIA_COMMAND_GetExposure: |
| down(&cam->param_lock); |
| datasize=8; |
| break; |
| case CPIA_COMMAND_ReadMCPorts: |
| case CPIA_COMMAND_ReadVCRegs: |
| datasize = 4; |
| break; |
| default: |
| datasize=0; |
| break; |
| } |
| |
| cmd[0] = command>>8; |
| cmd[1] = command&0xff; |
| cmd[2] = a; |
| cmd[3] = b; |
| cmd[4] = c; |
| cmd[5] = d; |
| cmd[6] = datasize; |
| cmd[7] = 0; |
| |
| retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data); |
| if (retval) { |
| DBG("%x - failed, retval=%d\n", command, retval); |
| if (command == CPIA_COMMAND_GetColourParams || |
| command == CPIA_COMMAND_GetColourBalance || |
| command == CPIA_COMMAND_GetExposure) |
| up(&cam->param_lock); |
| } else { |
| switch(command) { |
| case CPIA_COMMAND_GetCPIAVersion: |
| cam->params.version.firmwareVersion = data[0]; |
| cam->params.version.firmwareRevision = data[1]; |
| cam->params.version.vcVersion = data[2]; |
| cam->params.version.vcRevision = data[3]; |
| break; |
| case CPIA_COMMAND_GetPnPID: |
| cam->params.pnpID.vendor = data[0]+(((u16)data[1])<<8); |
| cam->params.pnpID.product = data[2]+(((u16)data[3])<<8); |
| cam->params.pnpID.deviceRevision = |
| data[4]+(((u16)data[5])<<8); |
| break; |
| case CPIA_COMMAND_GetCameraStatus: |
| cam->params.status.systemState = data[0]; |
| cam->params.status.grabState = data[1]; |
| cam->params.status.streamState = data[2]; |
| cam->params.status.fatalError = data[3]; |
| cam->params.status.cmdError = data[4]; |
| cam->params.status.debugFlags = data[5]; |
| cam->params.status.vpStatus = data[6]; |
| cam->params.status.errorCode = data[7]; |
| break; |
| case CPIA_COMMAND_GetVPVersion: |
| cam->params.vpVersion.vpVersion = data[0]; |
| cam->params.vpVersion.vpRevision = data[1]; |
| cam->params.vpVersion.cameraHeadID = |
| data[2]+(((u16)data[3])<<8); |
| break; |
| case CPIA_COMMAND_GetColourParams: |
| cam->params.colourParams.brightness = data[0]; |
| cam->params.colourParams.contrast = data[1]; |
| cam->params.colourParams.saturation = data[2]; |
| up(&cam->param_lock); |
| break; |
| case CPIA_COMMAND_GetColourBalance: |
| cam->params.colourBalance.redGain = data[0]; |
| cam->params.colourBalance.greenGain = data[1]; |
| cam->params.colourBalance.blueGain = data[2]; |
| up(&cam->param_lock); |
| break; |
| case CPIA_COMMAND_GetExposure: |
| cam->params.exposure.gain = data[0]; |
| cam->params.exposure.fineExp = data[1]; |
| cam->params.exposure.coarseExpLo = data[2]; |
| cam->params.exposure.coarseExpHi = data[3]; |
| cam->params.exposure.redComp = data[4]; |
| cam->params.exposure.green1Comp = data[5]; |
| cam->params.exposure.green2Comp = data[6]; |
| cam->params.exposure.blueComp = data[7]; |
| up(&cam->param_lock); |
| break; |
| |
| case CPIA_COMMAND_ReadMCPorts: |
| if (!cam->params.qx3.qx3_detected) |
| break; |
| /* test button press */ |
| cam->params.qx3.button = ((data[1] & 0x02) == 0); |
| if (cam->params.qx3.button) { |
| /* button pressed - unlock the latch */ |
| do_command(cam,CPIA_COMMAND_WriteMCPort,3,0xDF,0xDF,0); |
| do_command(cam,CPIA_COMMAND_WriteMCPort,3,0xFF,0xFF,0); |
| } |
| |
| /* test whether microscope is cradled */ |
| cam->params.qx3.cradled = ((data[2] & 0x40) == 0); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| return retval; |
| } |
| |
| /* send a command to the camera with an additional data transaction */ |
| static int do_command_extended(struct cam_data *cam, u16 command, |
| u8 a, u8 b, u8 c, u8 d, |
| u8 e, u8 f, u8 g, u8 h, |
| u8 i, u8 j, u8 k, u8 l) |
| { |
| int retval; |
| u8 cmd[8], data[8]; |
| |
| cmd[0] = command>>8; |
| cmd[1] = command&0xff; |
| cmd[2] = a; |
| cmd[3] = b; |
| cmd[4] = c; |
| cmd[5] = d; |
| cmd[6] = 8; |
| cmd[7] = 0; |
| data[0] = e; |
| data[1] = f; |
| data[2] = g; |
| data[3] = h; |
| data[4] = i; |
| data[5] = j; |
| data[6] = k; |
| data[7] = l; |
| |
| retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data); |
| if (retval) |
| DBG("%x - failed\n", command); |
| |
| return retval; |
| } |
| |
| /********************************************************************** |
| * |
| * Colorspace conversion |
| * |
| **********************************************************************/ |
| #define LIMIT(x) ((((x)>0xffffff)?0xff0000:(((x)<=0xffff)?0:(x)&0xff0000))>>16) |
| |
| static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt, |
| int linesize, int mmap_kludge) |
| { |
| int y, u, v, r, g, b, y1; |
| |
| /* Odd lines use the same u and v as the previous line. |
| * Because of compression, it is necessary to get this |
| * information from the decoded image. */ |
| switch(out_fmt) { |
| case VIDEO_PALETTE_RGB555: |
| y = (*yuv++ - 16) * 76310; |
| y1 = (*yuv - 16) * 76310; |
| r = ((*(rgb+1-linesize)) & 0x7c) << 1; |
| g = ((*(rgb-linesize)) & 0xe0) >> 4 | |
| ((*(rgb+1-linesize)) & 0x03) << 6; |
| b = ((*(rgb-linesize)) & 0x1f) << 3; |
| u = (-53294 * r - 104635 * g + 157929 * b) / 5756495; |
| v = (157968 * r - 132278 * g - 25690 * b) / 5366159; |
| r = 104635 * v; |
| g = -25690 * u - 53294 * v; |
| b = 132278 * u; |
| *rgb++ = ((LIMIT(g+y) & 0xf8) << 2) | (LIMIT(b+y) >> 3); |
| *rgb++ = ((LIMIT(r+y) & 0xf8) >> 1) | (LIMIT(g+y) >> 6); |
| *rgb++ = ((LIMIT(g+y1) & 0xf8) << 2) | (LIMIT(b+y1) >> 3); |
| *rgb = ((LIMIT(r+y1) & 0xf8) >> 1) | (LIMIT(g+y1) >> 6); |
| return 4; |
| case VIDEO_PALETTE_RGB565: |
| y = (*yuv++ - 16) * 76310; |
| y1 = (*yuv - 16) * 76310; |
| r = (*(rgb+1-linesize)) & 0xf8; |
| g = ((*(rgb-linesize)) & 0xe0) >> 3 | |
| ((*(rgb+1-linesize)) & 0x07) << 5; |
| b = ((*(rgb-linesize)) & 0x1f) << 3; |
| u = (-53294 * r - 104635 * g + 157929 * b) / 5756495; |
| v = (157968 * r - 132278 * g - 25690 * b) / 5366159; |
| r = 104635 * v; |
| g = -25690 * u - 53294 * v; |
| b = 132278 * u; |
| *rgb++ = ((LIMIT(g+y) & 0xfc) << 3) | (LIMIT(b+y) >> 3); |
| *rgb++ = (LIMIT(r+y) & 0xf8) | (LIMIT(g+y) >> 5); |
| *rgb++ = ((LIMIT(g+y1) & 0xfc) << 3) | (LIMIT(b+y1) >> 3); |
| *rgb = (LIMIT(r+y1) & 0xf8) | (LIMIT(g+y1) >> 5); |
| return 4; |
| break; |
| case VIDEO_PALETTE_RGB24: |
| case VIDEO_PALETTE_RGB32: |
| y = (*yuv++ - 16) * 76310; |
| y1 = (*yuv - 16) * 76310; |
| if (mmap_kludge) { |
| r = *(rgb+2-linesize); |
| g = *(rgb+1-linesize); |
| b = *(rgb-linesize); |
| } else { |
| r = *(rgb-linesize); |
| g = *(rgb+1-linesize); |
| b = *(rgb+2-linesize); |
| } |
| u = (-53294 * r - 104635 * g + 157929 * b) / 5756495; |
| v = (157968 * r - 132278 * g - 25690 * b) / 5366159; |
| r = 104635 * v; |
| g = -25690 * u + -53294 * v; |
| b = 132278 * u; |
| if (mmap_kludge) { |
| *rgb++ = LIMIT(b+y); |
| *rgb++ = LIMIT(g+y); |
| *rgb++ = LIMIT(r+y); |
| if(out_fmt == VIDEO_PALETTE_RGB32) |
| rgb++; |
| *rgb++ = LIMIT(b+y1); |
| *rgb++ = LIMIT(g+y1); |
| *rgb = LIMIT(r+y1); |
| } else { |
| *rgb++ = LIMIT(r+y); |
| *rgb++ = LIMIT(g+y); |
| *rgb++ = LIMIT(b+y); |
| if(out_fmt == VIDEO_PALETTE_RGB32) |
| rgb++; |
| *rgb++ = LIMIT(r+y1); |
| *rgb++ = LIMIT(g+y1); |
| *rgb = LIMIT(b+y1); |
| } |
| if(out_fmt == VIDEO_PALETTE_RGB32) |
| return 8; |
| return 6; |
| case VIDEO_PALETTE_YUV422: |
| case VIDEO_PALETTE_YUYV: |
| y = *yuv++; |
| u = *(rgb+1-linesize); |
| y1 = *yuv; |
| v = *(rgb+3-linesize); |
| *rgb++ = y; |
| *rgb++ = u; |
| *rgb++ = y1; |
| *rgb = v; |
| return 4; |
| case VIDEO_PALETTE_UYVY: |
| u = *(rgb-linesize); |
| y = *yuv++; |
| v = *(rgb+2-linesize); |
| y1 = *yuv; |
| *rgb++ = u; |
| *rgb++ = y; |
| *rgb++ = v; |
| *rgb = y1; |
| return 4; |
| case VIDEO_PALETTE_GREY: |
| *rgb++ = *yuv++; |
| *rgb = *yuv; |
| return 2; |
| default: |
| DBG("Empty: %d\n", out_fmt); |
| return 0; |
| } |
| } |
| |
| |
| static int yuvconvert(unsigned char *yuv, unsigned char *rgb, int out_fmt, |
| int in_uyvy, int mmap_kludge) |
| { |
| int y, u, v, r, g, b, y1; |
| |
| switch(out_fmt) { |
| case VIDEO_PALETTE_RGB555: |
| case VIDEO_PALETTE_RGB565: |
| case VIDEO_PALETTE_RGB24: |
| case VIDEO_PALETTE_RGB32: |
| if (in_uyvy) { |
| u = *yuv++ - 128; |
| y = (*yuv++ - 16) * 76310; |
| v = *yuv++ - 128; |
| y1 = (*yuv - 16) * 76310; |
| } else { |
| y = (*yuv++ - 16) * 76310; |
| u = *yuv++ - 128; |
| y1 = (*yuv++ - 16) * 76310; |
| v = *yuv - 128; |
| } |
| r = 104635 * v; |
| g = -25690 * u + -53294 * v; |
| b = 132278 * u; |
| break; |
| default: |
| y = *yuv++; |
| u = *yuv++; |
| y1 = *yuv++; |
| v = *yuv; |
| /* Just to avoid compiler warnings */ |
| r = 0; |
| g = 0; |
| b = 0; |
| break; |
| } |
| switch(out_fmt) { |
| case VIDEO_PALETTE_RGB555: |
| *rgb++ = ((LIMIT(g+y) & 0xf8) << 2) | (LIMIT(b+y) >> 3); |
| *rgb++ = ((LIMIT(r+y) & 0xf8) >> 1) | (LIMIT(g+y) >> 6); |
| *rgb++ = ((LIMIT(g+y1) & 0xf8) << 2) | (LIMIT(b+y1) >> 3); |
| *rgb = ((LIMIT(r+y1) & 0xf8) >> 1) | (LIMIT(g+y1) >> 6); |
| return 4; |
| case VIDEO_PALETTE_RGB565: |
| *rgb++ = ((LIMIT(g+y) & 0xfc) << 3) | (LIMIT(b+y) >> 3); |
| *rgb++ = (LIMIT(r+y) & 0xf8) | (LIMIT(g+y) >> 5); |
| *rgb++ = ((LIMIT(g+y1) & 0xfc) << 3) | (LIMIT(b+y1) >> 3); |
| *rgb = (LIMIT(r+y1) & 0xf8) | (LIMIT(g+y1) >> 5); |
| return 4; |
| case VIDEO_PALETTE_RGB24: |
| if (mmap_kludge) { |
| *rgb++ = LIMIT(b+y); |
| *rgb++ = LIMIT(g+y); |
| *rgb++ = LIMIT(r+y); |
| *rgb++ = LIMIT(b+y1); |
| *rgb++ = LIMIT(g+y1); |
| *rgb = LIMIT(r+y1); |
| } else { |
| *rgb++ = LIMIT(r+y); |
| *rgb++ = LIMIT(g+y); |
| *rgb++ = LIMIT(b+y); |
| *rgb++ = LIMIT(r+y1); |
| *rgb++ = LIMIT(g+y1); |
| *rgb = LIMIT(b+y1); |
| } |
| return 6; |
| case VIDEO_PALETTE_RGB32: |
| if (mmap_kludge) { |
| *rgb++ = LIMIT(b+y); |
| *rgb++ = LIMIT(g+y); |
| *rgb++ = LIMIT(r+y); |
| rgb++; |
| *rgb++ = LIMIT(b+y1); |
| *rgb++ = LIMIT(g+y1); |
| *rgb = LIMIT(r+y1); |
| } else { |
| *rgb++ = LIMIT(r+y); |
| *rgb++ = LIMIT(g+y); |
| *rgb++ = LIMIT(b+y); |
| rgb++; |
| *rgb++ = LIMIT(r+y1); |
| *rgb++ = LIMIT(g+y1); |
| *rgb = LIMIT(b+y1); |
| } |
| return 8; |
| case VIDEO_PALETTE_GREY: |
| *rgb++ = y; |
| *rgb = y1; |
| return 2; |
| case VIDEO_PALETTE_YUV422: |
| case VIDEO_PALETTE_YUYV: |
| *rgb++ = y; |
| *rgb++ = u; |
| *rgb++ = y1; |
| *rgb = v; |
| return 4; |
| case VIDEO_PALETTE_UYVY: |
| *rgb++ = u; |
| *rgb++ = y; |
| *rgb++ = v; |
| *rgb = y1; |
| return 4; |
| default: |
| DBG("Empty: %d\n", out_fmt); |
| return 0; |
| } |
| } |
| |
| static int skipcount(int count, int fmt) |
| { |
| switch(fmt) { |
| case VIDEO_PALETTE_GREY: |
| return count; |
| case VIDEO_PALETTE_RGB555: |
| case VIDEO_PALETTE_RGB565: |
| case VIDEO_PALETTE_YUV422: |
| case VIDEO_PALETTE_YUYV: |
| case VIDEO_PALETTE_UYVY: |
| return 2*count; |
| case VIDEO_PALETTE_RGB24: |
| return 3*count; |
| case VIDEO_PALETTE_RGB32: |
| return 4*count; |
| default: |
| return 0; |
| } |
| } |
| |
| static int parse_picture(struct cam_data *cam, int size) |
| { |
| u8 *obuf, *ibuf, *end_obuf; |
| int ll, in_uyvy, compressed, decimation, even_line, origsize, out_fmt; |
| int rows, cols, linesize, subsample_422; |
| |
| /* make sure params don't change while we are decoding */ |
| down(&cam->param_lock); |
| |
| obuf = cam->decompressed_frame.data; |
| end_obuf = obuf+CPIA_MAX_FRAME_SIZE; |
| ibuf = cam->raw_image; |
| origsize = size; |
| out_fmt = cam->vp.palette; |
| |
| if ((ibuf[0] != MAGIC_0) || (ibuf[1] != MAGIC_1)) { |
| LOG("header not found\n"); |
| up(&cam->param_lock); |
| return -1; |
| } |
| |
| if ((ibuf[16] != VIDEOSIZE_QCIF) && (ibuf[16] != VIDEOSIZE_CIF)) { |
| LOG("wrong video size\n"); |
| up(&cam->param_lock); |
| return -1; |
| } |
| |
| if (ibuf[17] != SUBSAMPLE_420 && ibuf[17] != SUBSAMPLE_422) { |
| LOG("illegal subtype %d\n",ibuf[17]); |
| up(&cam->param_lock); |
| return -1; |
| } |
| subsample_422 = ibuf[17] == SUBSAMPLE_422; |
| |
| if (ibuf[18] != YUVORDER_YUYV && ibuf[18] != YUVORDER_UYVY) { |
| LOG("illegal yuvorder %d\n",ibuf[18]); |
| up(&cam->param_lock); |
| return -1; |
| } |
| in_uyvy = ibuf[18] == YUVORDER_UYVY; |
| |
| if ((ibuf[24] != cam->params.roi.colStart) || |
| (ibuf[25] != cam->params.roi.colEnd) || |
| (ibuf[26] != cam->params.roi.rowStart) || |
| (ibuf[27] != cam->params.roi.rowEnd)) { |
| LOG("ROI mismatch\n"); |
| up(&cam->param_lock); |
| return -1; |
| } |
| cols = 8*(ibuf[25] - ibuf[24]); |
| rows = 4*(ibuf[27] - ibuf[26]); |
| |
| |
| if ((ibuf[28] != NOT_COMPRESSED) && (ibuf[28] != COMPRESSED)) { |
| LOG("illegal compression %d\n",ibuf[28]); |
| up(&cam->param_lock); |
| return -1; |
| } |
| compressed = (ibuf[28] == COMPRESSED); |
| |
| if (ibuf[29] != NO_DECIMATION && ibuf[29] != DECIMATION_ENAB) { |
| LOG("illegal decimation %d\n",ibuf[29]); |
| up(&cam->param_lock); |
| return -1; |
| } |
| decimation = (ibuf[29] == DECIMATION_ENAB); |
| |
| cam->params.yuvThreshold.yThreshold = ibuf[30]; |
| cam->params.yuvThreshold.uvThreshold = ibuf[31]; |
| cam->params.status.systemState = ibuf[32]; |
| cam->params.status.grabState = ibuf[33]; |
| cam->params.status.streamState = ibuf[34]; |
| cam->params.status.fatalError = ibuf[35]; |
| cam->params.status.cmdError = ibuf[36]; |
| cam->params.status.debugFlags = ibuf[37]; |
| cam->params.status.vpStatus = ibuf[38]; |
| cam->params.status.errorCode = ibuf[39]; |
| cam->fps = ibuf[41]; |
| up(&cam->param_lock); |
| |
| linesize = skipcount(cols, out_fmt); |
| ibuf += FRAME_HEADER_SIZE; |
| size -= FRAME_HEADER_SIZE; |
| ll = ibuf[0] | (ibuf[1] << 8); |
| ibuf += 2; |
| even_line = 1; |
| |
| while (size > 0) { |
| size -= (ll+2); |
| if (size < 0) { |
| LOG("Insufficient data in buffer\n"); |
| return -1; |
| } |
| |
| while (ll > 1) { |
| if (!compressed || (compressed && !(*ibuf & 1))) { |
| if(subsample_422 || even_line) { |
| obuf += yuvconvert(ibuf, obuf, out_fmt, |
| in_uyvy, cam->mmap_kludge); |
| ibuf += 4; |
| ll -= 4; |
| } else { |
| /* SUBSAMPLE_420 on an odd line */ |
| obuf += convert420(ibuf, obuf, |
| out_fmt, linesize, |
| cam->mmap_kludge); |
| ibuf += 2; |
| ll -= 2; |
| } |
| } else { |
| /*skip compressed interval from previous frame*/ |
| obuf += skipcount(*ibuf >> 1, out_fmt); |
| if (obuf > end_obuf) { |
| LOG("Insufficient buffer size\n"); |
| return -1; |
| } |
| ++ibuf; |
| ll--; |
| } |
| } |
| if (ll == 1) { |
| if (*ibuf != EOL) { |
| DBG("EOL not found giving up after %d/%d" |
| " bytes\n", origsize-size, origsize); |
| return -1; |
| } |
| |
| ++ibuf; /* skip over EOL */ |
| |
| if ((size > 3) && (ibuf[0] == EOI) && (ibuf[1] == EOI) && |
| (ibuf[2] == EOI) && (ibuf[3] == EOI)) { |
| size -= 4; |
| break; |
| } |
| |
| if(decimation) { |
| /* skip the odd lines for now */ |
| obuf += linesize; |
| } |
| |
| if (size > 1) { |
| ll = ibuf[0] | (ibuf[1] << 8); |
| ibuf += 2; /* skip over line length */ |
| } |
| if(!decimation) |
| even_line = !even_line; |
| } else { |
| LOG("line length was not 1 but %d after %d/%d bytes\n", |
| ll, origsize-size, origsize); |
| return -1; |
| } |
| } |
| |
| if(decimation) { |
| /* interpolate odd rows */ |
| int i, j; |
| u8 *prev, *next; |
| prev = cam->decompressed_frame.data; |
| obuf = prev+linesize; |
| next = obuf+linesize; |
| for(i=1; i<rows-1; i+=2) { |
| for(j=0; j<linesize; ++j) { |
| *obuf++ = ((int)*prev++ + *next++) / 2; |
| } |
| prev += linesize; |
| obuf += linesize; |
| next += linesize; |
| } |
| /* last row is odd, just copy previous row */ |
| memcpy(obuf, prev, linesize); |
| } |
| |
| cam->decompressed_frame.count = obuf-cam->decompressed_frame.data; |
| |
| return cam->decompressed_frame.count; |
| } |
| |
| /* InitStreamCap wrapper to select correct start line */ |
| static inline int init_stream_cap(struct cam_data *cam) |
| { |
| return do_command(cam, CPIA_COMMAND_InitStreamCap, |
| 0, cam->params.streamStartLine, 0, 0); |
| } |
| |
| |
| /* find_over_exposure |
| * Finds a suitable value of OverExposure for use with SetFlickerCtrl |
| * Some calculation is required because this value changes with the brightness |
| * set with SetColourParameters |
| * |
| * Parameters: Brightness - last brightness value set with SetColourParameters |
| * |
| * Returns: OverExposure value to use with SetFlickerCtrl |
| */ |
| #define FLICKER_MAX_EXPOSURE 250 |
| #define FLICKER_ALLOWABLE_OVER_EXPOSURE 146 |
| #define FLICKER_BRIGHTNESS_CONSTANT 59 |
| static int find_over_exposure(int brightness) |
| { |
| int MaxAllowableOverExposure, OverExposure; |
| |
| MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness - |
| FLICKER_BRIGHTNESS_CONSTANT; |
| |
| if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) { |
| OverExposure = MaxAllowableOverExposure; |
| } else { |
| OverExposure = FLICKER_ALLOWABLE_OVER_EXPOSURE; |
| } |
| |
| return OverExposure; |
| } |
| #undef FLICKER_MAX_EXPOSURE |
| #undef FLICKER_ALLOWABLE_OVER_EXPOSURE |
| #undef FLICKER_BRIGHTNESS_CONSTANT |
| |
| /* update various camera modes and settings */ |
| static void dispatch_commands(struct cam_data *cam) |
| { |
| down(&cam->param_lock); |
| if (cam->cmd_queue==COMMAND_NONE) { |
| up(&cam->param_lock); |
| return; |
| } |
| DEB_BYTE(cam->cmd_queue); |
| DEB_BYTE(cam->cmd_queue>>8); |
| if (cam->cmd_queue & COMMAND_SETFORMAT) { |
| do_command(cam, CPIA_COMMAND_SetFormat, |
| cam->params.format.videoSize, |
| cam->params.format.subSample, |
| cam->params.format.yuvOrder, 0); |
| do_command(cam, CPIA_COMMAND_SetROI, |
| cam->params.roi.colStart, cam->params.roi.colEnd, |
| cam->params.roi.rowStart, cam->params.roi.rowEnd); |
| cam->first_frame = 1; |
| } |
| |
| if (cam->cmd_queue & COMMAND_SETCOLOURPARAMS) |
| do_command(cam, CPIA_COMMAND_SetColourParams, |
| cam->params.colourParams.brightness, |
| cam->params.colourParams.contrast, |
| cam->params.colourParams.saturation, 0); |
| |
| if (cam->cmd_queue & COMMAND_SETAPCOR) |
| do_command(cam, CPIA_COMMAND_SetApcor, |
| cam->params.apcor.gain1, |
| cam->params.apcor.gain2, |
| cam->params.apcor.gain4, |
| cam->params.apcor.gain8); |
| |
| if (cam->cmd_queue & COMMAND_SETVLOFFSET) |
| do_command(cam, CPIA_COMMAND_SetVLOffset, |
| cam->params.vlOffset.gain1, |
| cam->params.vlOffset.gain2, |
| cam->params.vlOffset.gain4, |
| cam->params.vlOffset.gain8); |
| |
| if (cam->cmd_queue & COMMAND_SETEXPOSURE) { |
| do_command_extended(cam, CPIA_COMMAND_SetExposure, |
| cam->params.exposure.gainMode, |
| 1, |
| cam->params.exposure.compMode, |
| cam->params.exposure.centreWeight, |
| cam->params.exposure.gain, |
| cam->params.exposure.fineExp, |
| cam->params.exposure.coarseExpLo, |
| cam->params.exposure.coarseExpHi, |
| cam->params.exposure.redComp, |
| cam->params.exposure.green1Comp, |
| cam->params.exposure.green2Comp, |
| cam->params.exposure.blueComp); |
| if(cam->params.exposure.expMode != 1) { |
| do_command_extended(cam, CPIA_COMMAND_SetExposure, |
| 0, |
| cam->params.exposure.expMode, |
| 0, 0, |
| cam->params.exposure.gain, |
| cam->params.exposure.fineExp, |
| cam->params.exposure.coarseExpLo, |
| cam->params.exposure.coarseExpHi, |
| 0, 0, 0, 0); |
| } |
| } |
| |
| if (cam->cmd_queue & COMMAND_SETCOLOURBALANCE) { |
| if (cam->params.colourBalance.balanceMode == 1) { |
| do_command(cam, CPIA_COMMAND_SetColourBalance, |
| 1, |
| cam->params.colourBalance.redGain, |
| cam->params.colourBalance.greenGain, |
| cam->params.colourBalance.blueGain); |
| do_command(cam, CPIA_COMMAND_SetColourBalance, |
| 3, 0, 0, 0); |
| } |
| if (cam->params.colourBalance.balanceMode == 2) { |
| do_command(cam, CPIA_COMMAND_SetColourBalance, |
| 2, 0, 0, 0); |
| } |
| if (cam->params.colourBalance.balanceMode == 3) { |
| do_command(cam, CPIA_COMMAND_SetColourBalance, |
| 3, 0, 0, 0); |
| } |
| } |
| |
| if (cam->cmd_queue & COMMAND_SETCOMPRESSIONTARGET) |
| do_command(cam, CPIA_COMMAND_SetCompressionTarget, |
| cam->params.compressionTarget.frTargeting, |
| cam->params.compressionTarget.targetFR, |
| cam->params.compressionTarget.targetQ, 0); |
| |
| if (cam->cmd_queue & COMMAND_SETYUVTHRESH) |
| do_command(cam, CPIA_COMMAND_SetYUVThresh, |
| cam->params.yuvThreshold.yThreshold, |
| cam->params.yuvThreshold.uvThreshold, 0, 0); |
| |
| if (cam->cmd_queue & COMMAND_SETCOMPRESSIONPARAMS) |
| do_command_extended(cam, CPIA_COMMAND_SetCompressionParams, |
| 0, 0, 0, 0, |
| cam->params.compressionParams.hysteresis, |
| cam->params.compressionParams.threshMax, |
| cam->params.compressionParams.smallStep, |
| cam->params.compressionParams.largeStep, |
| cam->params.compressionParams.decimationHysteresis, |
| cam->params.compressionParams.frDiffStepThresh, |
| cam->params.compressionParams.qDiffStepThresh, |
| cam->params.compressionParams.decimationThreshMod); |
| |
| if (cam->cmd_queue & COMMAND_SETCOMPRESSION) |
| do_command(cam, CPIA_COMMAND_SetCompression, |
| cam->params.compression.mode, |
| cam->params.compression.decimation, 0, 0); |
| |
| if (cam->cmd_queue & COMMAND_SETSENSORFPS) |
| do_command(cam, CPIA_COMMAND_SetSensorFPS, |
| cam->params.sensorFps.divisor, |
| cam->params.sensorFps.baserate, 0, 0); |
| |
| if (cam->cmd_queue & COMMAND_SETFLICKERCTRL) |
| do_command(cam, CPIA_COMMAND_SetFlickerCtrl, |
| cam->params.flickerControl.flickerMode, |
| cam->params.flickerControl.coarseJump, |
| abs(cam->params.flickerControl.allowableOverExposure), |
| 0); |
| |
| if (cam->cmd_queue & COMMAND_SETECPTIMING) |
| do_command(cam, CPIA_COMMAND_SetECPTiming, |
| cam->params.ecpTiming, 0, 0, 0); |
| |
| if (cam->cmd_queue & COMMAND_PAUSE) |
| do_command(cam, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0); |
| |
| if (cam->cmd_queue & COMMAND_RESUME) |
| init_stream_cap(cam); |
| |
| if (cam->cmd_queue & COMMAND_SETLIGHTS && cam->params.qx3.qx3_detected) |
| { |
| int p1 = (cam->params.qx3.bottomlight == 0) << 1; |
| int p2 = (cam->params.qx3.toplight == 0) << 3; |
| do_command(cam, CPIA_COMMAND_WriteVCReg, 0x90, 0x8F, 0x50, 0); |
| do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0); |
| } |
| |
| cam->cmd_queue = COMMAND_NONE; |
| up(&cam->param_lock); |
| return; |
| } |
| |
| |
| |
| static void set_flicker(struct cam_params *params, volatile u32 *command_flags, |
| int on) |
| { |
| /* Everything in here is from the Windows driver */ |
| #define FIRMWARE_VERSION(x,y) (params->version.firmwareVersion == (x) && \ |
| params->version.firmwareRevision == (y)) |
| /* define for compgain calculation */ |
| #if 0 |
| #define COMPGAIN(base, curexp, newexp) \ |
| (u8) ((((float) base - 128.0) * ((float) curexp / (float) newexp)) + 128.5) |
| #define EXP_FROM_COMP(basecomp, curcomp, curexp) \ |
| (u16)((float)curexp * (float)(u8)(curcomp + 128) / (float)(u8)(basecomp - 128)) |
| #else |
| /* equivalent functions without floating point math */ |
| #define COMPGAIN(base, curexp, newexp) \ |
| (u8)(128 + (((u32)(2*(base-128)*curexp + newexp)) / (2* newexp)) ) |
| #define EXP_FROM_COMP(basecomp, curcomp, curexp) \ |
| (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128))) |
| #endif |
| |
| |
| int currentexp = params->exposure.coarseExpLo + |
| params->exposure.coarseExpHi*256; |
| int startexp; |
| if (on) { |
| int cj = params->flickerControl.coarseJump; |
| params->flickerControl.flickerMode = 1; |
| params->flickerControl.disabled = 0; |
| if(params->exposure.expMode != 2) |
| *command_flags |= COMMAND_SETEXPOSURE; |
| params->exposure.expMode = 2; |
| currentexp = currentexp << params->exposure.gain; |
| params->exposure.gain = 0; |
| /* round down current exposure to nearest value */ |
| startexp = (currentexp + ROUND_UP_EXP_FOR_FLICKER) / cj; |
| if(startexp < 1) |
| startexp = 1; |
| startexp = (startexp * cj) - 1; |
| if(FIRMWARE_VERSION(1,2)) |
| while(startexp > MAX_EXP_102) |
| startexp -= cj; |
| else |
| while(startexp > MAX_EXP) |
| startexp -= cj; |
| params->exposure.coarseExpLo = startexp & 0xff; |
| params->exposure.coarseExpHi = startexp >> 8; |
| if (currentexp > startexp) { |
| if (currentexp > (2 * startexp)) |
| currentexp = 2 * startexp; |
| params->exposure.redComp = COMPGAIN (COMP_RED, currentexp, startexp); |
| params->exposure.green1Comp = COMPGAIN (COMP_GREEN1, currentexp, startexp); |
| params->exposure.green2Comp = COMPGAIN (COMP_GREEN2, currentexp, startexp); |
| params->exposure.blueComp = COMPGAIN (COMP_BLUE, currentexp, startexp); |
| } else { |
| params->exposure.redComp = COMP_RED; |
| params->exposure.green1Comp = COMP_GREEN1; |
| params->exposure.green2Comp = COMP_GREEN2; |
| params->exposure.blueComp = COMP_BLUE; |
| } |
| if(FIRMWARE_VERSION(1,2)) |
| params->exposure.compMode = 0; |
| else |
| params->exposure.compMode = 1; |
| |
| params->apcor.gain1 = 0x18; |
| params->apcor.gain2 = 0x18; |
| params->apcor.gain4 = 0x16; |
| params->apcor.gain8 = 0x14; |
| *command_flags |= COMMAND_SETAPCOR; |
| } else { |
| params->flickerControl.flickerMode = 0; |
| params->flickerControl.disabled = 1; |
| /* Coarse = average of equivalent coarse for each comp channel */ |
| startexp = EXP_FROM_COMP(COMP_RED, params->exposure.redComp, currentexp); |
| startexp += EXP_FROM_COMP(COMP_GREEN1, params->exposure.green1Comp, currentexp); |
| startexp += EXP_FROM_COMP(COMP_GREEN2, params->exposure.green2Comp, currentexp); |
| startexp += EXP_FROM_COMP(COMP_BLUE, params->exposure.blueComp, currentexp); |
| startexp = startexp >> 2; |
| while(startexp > MAX_EXP && |
| params->exposure.gain < params->exposure.gainMode-1) { |
| startexp = startexp >> 1; |
| ++params->exposure.gain; |
| } |
| if(FIRMWARE_VERSION(1,2) && startexp > MAX_EXP_102) |
| startexp = MAX_EXP_102; |
| if(startexp > MAX_EXP) |
| startexp = MAX_EXP; |
| params->exposure.coarseExpLo = startexp&0xff; |
| params->exposure.coarseExpHi = startexp >> 8; |
| params->exposure.redComp = COMP_RED; |
| params->exposure.green1Comp = COMP_GREEN1; |
| params->exposure.green2Comp = COMP_GREEN2; |
| params->exposure.blueComp = COMP_BLUE; |
| params->exposure.compMode = 1; |
| *command_flags |= COMMAND_SETEXPOSURE; |
| params->apcor.gain1 = 0x18; |
| params->apcor.gain2 = 0x16; |
| params->apcor.gain4 = 0x24; |
| params->apcor.gain8 = 0x34; |
| *command_flags |= COMMAND_SETAPCOR; |
| } |
| params->vlOffset.gain1 = 20; |
| params->vlOffset.gain2 = 24; |
| params->vlOffset.gain4 = 26; |
| params->vlOffset.gain8 = 26; |
| *command_flags |= COMMAND_SETVLOFFSET; |
| #undef FIRMWARE_VERSION |
| #undef EXP_FROM_COMP |
| #undef COMPGAIN |
| } |
| |
| #define FIRMWARE_VERSION(x,y) (cam->params.version.firmwareVersion == (x) && \ |
| cam->params.version.firmwareRevision == (y)) |
| /* monitor the exposure and adjust the sensor frame rate if needed */ |
| static void monitor_exposure(struct cam_data *cam) |
| { |
| u8 exp_acc, bcomp, gain, coarseL, cmd[8], data[8]; |
| int retval, light_exp, dark_exp, very_dark_exp; |
| int old_exposure, new_exposure, framerate; |
| |
| /* get necessary stats and register settings from camera */ |
| /* do_command can't handle this, so do it ourselves */ |
| cmd[0] = CPIA_COMMAND_ReadVPRegs>>8; |
| cmd[1] = CPIA_COMMAND_ReadVPRegs&0xff; |
| cmd[2] = 30; |
| cmd[3] = 4; |
| cmd[4] = 9; |
| cmd[5] = 8; |
| cmd[6] = 8; |
| cmd[7] = 0; |
| retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data); |
| if (retval) { |
| LOG("ReadVPRegs(30,4,9,8) - failed, retval=%d\n", |
| retval); |
| return; |
| } |
| exp_acc = data[0]; |
| bcomp = data[1]; |
| gain = data[2]; |
| coarseL = data[3]; |
| |
| down(&cam->param_lock); |
| light_exp = cam->params.colourParams.brightness + |
| TC - 50 + EXP_ACC_LIGHT; |
| if(light_exp > 255) |
| light_exp = 255; |
| dark_exp = cam->params.colourParams.brightness + |
| TC - 50 - EXP_ACC_DARK; |
| if(dark_exp < 0) |
| dark_exp = 0; |
| very_dark_exp = dark_exp/2; |
| |
| old_exposure = cam->params.exposure.coarseExpHi * 256 + |
| cam->params.exposure.coarseExpLo; |
| |
| if(!cam->params.flickerControl.disabled) { |
| /* Flicker control on */ |
| int max_comp = FIRMWARE_VERSION(1,2) ? MAX_COMP : HIGH_COMP_102; |
| bcomp += 128; /* decode */ |
| if(bcomp >= max_comp && exp_acc < dark_exp) { |
| /* dark */ |
| if(exp_acc < very_dark_exp) { |
| /* very dark */ |
| if(cam->exposure_status == EXPOSURE_VERY_DARK) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_VERY_DARK; |
| cam->exposure_count = 1; |
| } |
| } else { |
| /* just dark */ |
| if(cam->exposure_status == EXPOSURE_DARK) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_DARK; |
| cam->exposure_count = 1; |
| } |
| } |
| } else if(old_exposure <= LOW_EXP || exp_acc > light_exp) { |
| /* light */ |
| if(old_exposure <= VERY_LOW_EXP) { |
| /* very light */ |
| if(cam->exposure_status == EXPOSURE_VERY_LIGHT) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_VERY_LIGHT; |
| cam->exposure_count = 1; |
| } |
| } else { |
| /* just light */ |
| if(cam->exposure_status == EXPOSURE_LIGHT) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_LIGHT; |
| cam->exposure_count = 1; |
| } |
| } |
| } else { |
| /* not dark or light */ |
| cam->exposure_status = EXPOSURE_NORMAL; |
| } |
| } else { |
| /* Flicker control off */ |
| if(old_exposure >= MAX_EXP && exp_acc < dark_exp) { |
| /* dark */ |
| if(exp_acc < very_dark_exp) { |
| /* very dark */ |
| if(cam->exposure_status == EXPOSURE_VERY_DARK) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_VERY_DARK; |
| cam->exposure_count = 1; |
| } |
| } else { |
| /* just dark */ |
| if(cam->exposure_status == EXPOSURE_DARK) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_DARK; |
| cam->exposure_count = 1; |
| } |
| } |
| } else if(old_exposure <= LOW_EXP || exp_acc > light_exp) { |
| /* light */ |
| if(old_exposure <= VERY_LOW_EXP) { |
| /* very light */ |
| if(cam->exposure_status == EXPOSURE_VERY_LIGHT) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_VERY_LIGHT; |
| cam->exposure_count = 1; |
| } |
| } else { |
| /* just light */ |
| if(cam->exposure_status == EXPOSURE_LIGHT) |
| ++cam->exposure_count; |
| else { |
| cam->exposure_status = EXPOSURE_LIGHT; |
| cam->exposure_count = 1; |
| } |
| } |
| } else { |
| /* not dark or light */ |
| cam->exposure_status = EXPOSURE_NORMAL; |
| } |
| } |
| |
| framerate = cam->fps; |
| if(framerate > 30 || framerate < 1) |
| framerate = 1; |
| |
| if(!cam->params.flickerControl.disabled) { |
| /* Flicker control on */ |
| if((cam->exposure_status == EXPOSURE_VERY_DARK || |
| cam->exposure_status == EXPOSURE_DARK) && |
| cam->exposure_count >= DARK_TIME*framerate && |
| cam->params.sensorFps.divisor < 3) { |
| |
| /* dark for too long */ |
| ++cam->params.sensorFps.divisor; |
| cam->cmd_queue |= COMMAND_SETSENSORFPS; |
| |
| cam->params.flickerControl.coarseJump = |
| flicker_jumps[cam->mainsFreq] |
| [cam->params.sensorFps.baserate] |
| [cam->params.sensorFps.divisor]; |
| cam->cmd_queue |= COMMAND_SETFLICKERCTRL; |
| |
| new_exposure = cam->params.flickerControl.coarseJump-1; |
| while(new_exposure < old_exposure/2) |
| new_exposure += cam->params.flickerControl.coarseJump; |
| cam->params.exposure.coarseExpLo = new_exposure & 0xff; |
| cam->params.exposure.coarseExpHi = new_exposure >> 8; |
| cam->cmd_queue |= COMMAND_SETEXPOSURE; |
| cam->exposure_status = EXPOSURE_NORMAL; |
| LOG("Automatically decreasing sensor_fps\n"); |
| |
| } else if((cam->exposure_status == EXPOSURE_VERY_LIGHT || |
| cam->exposure_status == EXPOSURE_LIGHT) && |
| cam->exposure_count >= LIGHT_TIME*framerate && |
| cam->params.sensorFps.divisor > 0) { |
| |
| /* light for too long */ |
| int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ; |
| |
| --cam->params.sensorFps.divisor; |
| cam->cmd_queue |= COMMAND_SETSENSORFPS; |
| |
| cam->params.flickerControl.coarseJump = |
| flicker_jumps[cam->mainsFreq] |
| [cam->params.sensorFps.baserate] |
| [cam->params.sensorFps.divisor]; |
| cam->cmd_queue |= COMMAND_SETFLICKERCTRL; |
| |
| new_exposure = cam->params.flickerControl.coarseJump-1; |
| while(new_exposure < 2*old_exposure && |
| new_exposure+ |
| cam->params.flickerControl.coarseJump < max_exp) |
| new_exposure += cam->params.flickerControl.coarseJump; |
| cam->params.exposure.coarseExpLo = new_exposure & 0xff; |
| cam->params.exposure.coarseExpHi = new_exposure >> 8; |
| cam->cmd_queue |= COMMAND_SETEXPOSURE; |
| cam->exposure_status = EXPOSURE_NORMAL; |
| LOG("Automatically increasing sensor_fps\n"); |
| } |
| } else { |
| /* Flicker control off */ |
| if((cam->exposure_status == EXPOSURE_VERY_DARK || |
| cam->exposure_status == EXPOSURE_DARK) && |
| cam->exposure_count >= DARK_TIME*framerate && |
| cam->params.sensorFps.divisor < 3) { |
| |
| /* dark for too long */ |
| ++cam->params.sensorFps.divisor; |
| cam->cmd_queue |= COMMAND_SETSENSORFPS; |
| |
| if(cam->params.exposure.gain > 0) { |
| --cam->params.exposure.gain; |
| cam->cmd_queue |= COMMAND_SETEXPOSURE; |
| } |
| cam->exposure_status = EXPOSURE_NORMAL; |
| LOG("Automatically decreasing sensor_fps\n"); |
| |
| } else if((cam->exposure_status == EXPOSURE_VERY_LIGHT || |
| cam->exposure_status == EXPOSURE_LIGHT) && |
| cam->exposure_count >= LIGHT_TIME*framerate && |
| cam->params.sensorFps.divisor > 0) { |
| |
| /* light for too long */ |
| --cam->params.sensorFps.divisor; |
| cam->cmd_queue |= COMMAND_SETSENSORFPS; |
| |
| if(cam->params.exposure.gain < |
| cam->params.exposure.gainMode-1) { |
| ++cam->params.exposure.gain; |
| cam->cmd_queue |= COMMAND_SETEXPOSURE; |
| } |
| cam->exposure_status = EXPOSURE_NORMAL; |
| LOG("Automatically increasing sensor_fps\n"); |
| } |
| } |
| up(&cam->param_lock); |
| } |
| |
| /*-----------------------------------------------------------------*/ |
| /* if flicker is switched off, this function switches it back on.It checks, |
| however, that conditions are suitable before restarting it. |
| This should only be called for firmware version 1.2. |
| |
| It also adjust the colour balance when an exposure step is detected - as |
| long as flicker is running |
| */ |
| static void restart_flicker(struct cam_data *cam) |
| { |
| int cam_exposure, old_exp; |
| if(!FIRMWARE_VERSION(1,2)) |
| return; |
| down(&cam->param_lock); |
| if(cam->params.flickerControl.flickerMode == 0 || |
| cam->raw_image[39] == 0) { |
| up(&cam->param_lock); |
| return; |
| } |
| cam_exposure = cam->raw_image[39]*2; |
| old_exp = cam->params.exposure.coarseExpLo + |
| cam->params.exposure.coarseExpHi*256; |
| /* |
| see how far away camera exposure is from a valid |
| flicker exposure value |
| */ |
| cam_exposure %= cam->params.flickerControl.coarseJump; |
| if(!cam->params.flickerControl.disabled && |
| cam_exposure <= cam->params.flickerControl.coarseJump - 3) { |
| /* Flicker control auto-disabled */ |
| cam->params.flickerControl.disabled = 1; |
| } |
| |
| if(cam->params.flickerControl.disabled && |
| cam->params.flickerControl.flickerMode && |
| old_exp > cam->params.flickerControl.coarseJump + |
| ROUND_UP_EXP_FOR_FLICKER) { |
| /* exposure is now high enough to switch |
| flicker control back on */ |
| set_flicker(&cam->params, &cam->cmd_queue, 1); |
| if((cam->cmd_queue & COMMAND_SETEXPOSURE) && |
| cam->params.exposure.expMode == 2) |
| cam->exposure_status = EXPOSURE_NORMAL; |
| |
| } |
| up(&cam->param_lock); |
| } |
| #undef FIRMWARE_VERSION |
| |
| static int clear_stall(struct cam_data *cam) |
| { |
| /* FIXME: Does this actually work? */ |
| LOG("Clearing stall\n"); |
| |
| cam->ops->streamRead(cam->lowlevel_data, cam->raw_image, 0); |
| do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0); |
| return cam->params.status.streamState != STREAM_PAUSED; |
| } |
| |
| /* kernel thread function to read image from camera */ |
| static int fetch_frame(void *data) |
| { |
| int image_size, retry; |
| struct cam_data *cam = (struct cam_data *)data; |
| unsigned long oldjif, rate, diff; |
| |
| /* Allow up to two bad images in a row to be read and |
| * ignored before an error is reported */ |
| for (retry = 0; retry < 3; ++retry) { |
| if (retry) |
| DBG("retry=%d\n", retry); |
| |
| if (!cam->ops) |
| continue; |
| |
| /* load first frame always uncompressed */ |
| if (cam->first_frame && |
| cam->params.compression.mode != CPIA_COMPRESSION_NONE) { |
| do_command(cam, CPIA_COMMAND_SetCompression, |
| CPIA_COMPRESSION_NONE, |
| NO_DECIMATION, 0, 0); |
| /* Trial & error - Discarding a frame prevents the |
| first frame from having an error in the data. */ |
| do_command(cam, CPIA_COMMAND_DiscardFrame, 0, 0, 0, 0); |
| } |
| |
| /* init camera upload */ |
| if (do_command(cam, CPIA_COMMAND_GrabFrame, 0, |
| cam->params.streamStartLine, 0, 0)) |
| continue; |
| |
| if (cam->ops->wait_for_stream_ready) { |
| /* loop until image ready */ |
| int count = 0; |
| do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0); |
| while (cam->params.status.streamState != STREAM_READY) { |
| if(++count > READY_TIMEOUT) |
| break; |
| if(cam->params.status.streamState == |
| STREAM_PAUSED) { |
| /* Bad news */ |
| if(!clear_stall(cam)) |
| return -EIO; |
| } |
| |
| cond_resched(); |
| |
| /* sleep for 10 ms, hopefully ;) */ |
| msleep_interruptible(10); |
| if (signal_pending(current)) |
| return -EINTR; |
| |
| do_command(cam, CPIA_COMMAND_GetCameraStatus, |
| 0, 0, 0, 0); |
| } |
| if(cam->params.status.streamState != STREAM_READY) { |
| continue; |
| } |
| } |
| |
| cond_resched(); |
| |
| /* grab image from camera */ |
| oldjif = jiffies; |
| image_size = cam->ops->streamRead(cam->lowlevel_data, |
| cam->raw_image, 0); |
| if (image_size <= 0) { |
| DBG("streamRead failed: %d\n", image_size); |
| continue; |
| } |
| |
| rate = image_size * HZ / 1024; |
| diff = jiffies-oldjif; |
| cam->transfer_rate = diff==0 ? rate : rate/diff; |
| /* diff==0 ? unlikely but possible */ |
| |
| /* Switch flicker control back on if it got turned off */ |
| restart_flicker(cam); |
| |
| /* If AEC is enabled, monitor the exposure and |
| adjust the sensor frame rate if needed */ |
| if(cam->params.exposure.expMode == 2) |
| monitor_exposure(cam); |
| |
| /* camera idle now so dispatch queued commands */ |
| dispatch_commands(cam); |
| |
| /* Update our knowledge of the camera state */ |
| do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0); |
| do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); |
| do_command(cam, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0); |
| |
| /* decompress and convert image to by copying it from |
| * raw_image to decompressed_frame |
| */ |
| |
| cond_resched(); |
| |
| cam->image_size = parse_picture(cam, image_size); |
| if (cam->image_size <= 0) { |
| DBG("parse_picture failed %d\n", cam->image_size); |
| if(cam->params.compression.mode != |
| CPIA_COMPRESSION_NONE) { |
| /* Compression may not work right if we |
| had a bad frame, get the next one |
| uncompressed. */ |
| cam->first_frame = 1; |
| do_command(cam, CPIA_COMMAND_SetGrabMode, |
| CPIA_GRAB_SINGLE, 0, 0, 0); |
| /* FIXME: Trial & error - need up to 70ms for |
| the grab mode change to complete ? */ |
| msleep_interruptible(70); |
| if (signal_pending(current)) |
| return -EINTR; |
| } |
| } else |
| break; |
| } |
| |
| if (retry < 3) { |
| /* FIXME: this only works for double buffering */ |
| if (cam->frame[cam->curframe].state == FRAME_READY) { |
| memcpy(cam->frame[cam->curframe].data, |
| cam->decompressed_frame.data, |
| cam->decompressed_frame.count); |
| cam->frame[cam->curframe].state = FRAME_DONE; |
| } else |
| cam->decompressed_frame.state = FRAME_DONE; |
| |
| if (cam->first_frame) { |
| cam->first_frame = 0; |
| do_command(cam, CPIA_COMMAND_SetCompression, |
| cam->params.compression.mode, |
| cam->params.compression.decimation, 0, 0); |
| |
| /* Switch from single-grab to continuous grab */ |
| do_command(cam, CPIA_COMMAND_SetGrabMode, |
| CPIA_GRAB_CONTINUOUS, 0, 0, 0); |
| } |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| static int capture_frame(struct cam_data *cam, struct video_mmap *vm) |
| { |
| if (!cam->frame_buf) { |
| /* we do lazy allocation */ |
| int err; |
| if ((err = allocate_frame_buf(cam))) |
| return err; |
| } |
| |
| cam->curframe = vm->frame; |
| cam->frame[cam->curframe].state = FRAME_READY; |
| return fetch_frame(cam); |
| } |
| |
| static int goto_high_power(struct cam_data *cam) |
| { |
| if (do_command(cam, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0)) |
| return -EIO; |
| msleep_interruptible(40); /* windows driver does it too */ |
| if(signal_pending(current)) |
| return -EINTR; |
| if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0)) |
| return -EIO; |
| if (cam->params.status.systemState == HI_POWER_STATE) { |
| DBG("camera now in HIGH power state\n"); |
| return 0; |
| } |
| printstatus(cam); |
| return -EIO; |
| } |
| |
| static int goto_low_power(struct cam_data *cam) |
| { |
| if (do_command(cam, CPIA_COMMAND_GotoLoPower, 0, 0, 0, 0)) |
| return -1; |
| if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0)) |
| return -1; |
| if (cam->params.status.systemState == LO_POWER_STATE) { |
| DBG("camera now in LOW power state\n"); |
| return 0; |
| } |
| printstatus(cam); |
| return -1; |
| } |
| |
| static void save_camera_state(struct cam_data *cam) |
| { |
| if(!(cam->cmd_queue & COMMAND_SETCOLOURBALANCE)) |
| do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0); |
| if(!(cam->cmd_queue & COMMAND_SETEXPOSURE)) |
| do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); |
| |
| DBG("%d/%d/%d/%d/%d/%d/%d/%d\n", |
| cam->params.exposure.gain, |
| cam->params.exposure.fineExp, |
| cam->params.exposure.coarseExpLo, |
| cam->params.exposure.coarseExpHi, |
| cam->params.exposure.redComp, |
| cam->params.exposure.green1Comp, |
| cam->params.exposure.green2Comp, |
| cam->params.exposure.blueComp); |
| DBG("%d/%d/%d\n", |
| cam->params.colourBalance.redGain, |
| cam->params.colourBalance.greenGain, |
| cam->params.colourBalance.blueGain); |
| } |
| |
| static int set_camera_state(struct cam_data *cam) |
| { |
| cam->cmd_queue = COMMAND_SETCOMPRESSION | |
| COMMAND_SETCOMPRESSIONTARGET | |
| COMMAND_SETCOLOURPARAMS | |
| COMMAND_SETFORMAT | |
| COMMAND_SETYUVTHRESH | |
| COMMAND_SETECPTIMING | |
| COMMAND_SETCOMPRESSIONPARAMS | |
| COMMAND_SETEXPOSURE | |
| COMMAND_SETCOLOURBALANCE | |
| COMMAND_SETSENSORFPS | |
| COMMAND_SETAPCOR | |
| COMMAND_SETFLICKERCTRL | |
| COMMAND_SETVLOFFSET; |
| |
| do_command(cam, CPIA_COMMAND_SetGrabMode, CPIA_GRAB_SINGLE,0,0,0); |
| dispatch_commands(cam); |
| |
| /* Wait 6 frames for the sensor to get all settings and |
| AEC/ACB to settle */ |
| msleep_interruptible(6*(cam->params.sensorFps.baserate ? 33 : 40) * |
| (1 << cam->params.sensorFps.divisor) + 10); |
| |
| if(signal_pending(current)) |
| return -EINTR; |
| |
| save_camera_state(cam); |
| |
| return 0; |
| } |
| |
| static void get_version_information(struct cam_data *cam) |
| { |
| /* GetCPIAVersion */ |
| do_command(cam, CPIA_COMMAND_GetCPIAVersion, 0, 0, 0, 0); |
| |
| /* GetPnPID */ |
| do_command(cam, CPIA_COMMAND_GetPnPID, 0, 0, 0, 0); |
| } |
| |
| /* initialize camera */ |
| static int reset_camera(struct cam_data *cam) |
| { |
| int err; |
| /* Start the camera in low power mode */ |
| if (goto_low_power(cam)) { |
| if (cam->params.status.systemState != WARM_BOOT_STATE) |
| return -ENODEV; |
| |
| /* FIXME: this is just dirty trial and error */ |
| err = goto_high_power(cam); |
| if(err) |
| return err; |
| do_command(cam, CPIA_COMMAND_DiscardFrame, 0, 0, 0, 0); |
| if (goto_low_power(cam)) |
| return -ENODEV; |
| } |
| |
| /* procedure described in developer's guide p3-28 */ |
| |
| /* Check the firmware version. */ |
| cam->params.version.firmwareVersion = 0; |
| get_version_information(cam); |
| if (cam->params.version.firmwareVersion != 1) |
| return -ENODEV; |
| |
| /* A bug in firmware 1-02 limits gainMode to 2 */ |
| if(cam->params.version.firmwareRevision <= 2 && |
| cam->params.exposure.gainMode > 2) { |
| cam->params.exposure.gainMode = 2; |
| } |
| |
| /* set QX3 detected flag */ |
| cam->params.qx3.qx3_detected = (cam->params.pnpID.vendor == 0x0813 && |
| cam->params.pnpID.product == 0x0001); |
| |
| /* The fatal error checking should be done after |
| * the camera powers up (developer's guide p 3-38) */ |
| |
| /* Set streamState before transition to high power to avoid bug |
| * in firmware 1-02 */ |
| do_command(cam, CPIA_COMMAND_ModifyCameraStatus, STREAMSTATE, 0, |
| STREAM_NOT_READY, 0); |
| |
| /* GotoHiPower */ |
| err = goto_high_power(cam); |
| if (err) |
| return err; |
| |
| /* Check the camera status */ |
| if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0)) |
| return -EIO; |
| |
| if (cam->params.status.fatalError) { |
| DBG("fatal_error: %#04x\n", |
| cam->params.status.fatalError); |
| DBG("vp_status: %#04x\n", |
| cam->params.status.vpStatus); |
| if (cam->params.status.fatalError & ~(COM_FLAG|CPIA_FLAG)) { |
| /* Fatal error in camera */ |
| return -EIO; |
| } else if (cam->params.status.fatalError & (COM_FLAG|CPIA_FLAG)) { |
| /* Firmware 1-02 may do this for parallel port cameras, |
| * just clear the flags (developer's guide p 3-38) */ |
| do_command(cam, CPIA_COMMAND_ModifyCameraStatus, |
| FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0); |
| } |
| } |
| |
| /* Check the camera status again */ |
| if (cam->params.status.fatalError) { |
| if (cam->params.status.fatalError) |
| return -EIO; |
| } |
| |
| /* VPVersion can't be retrieved before the camera is in HiPower, |
| * so get it here instead of in get_version_information. */ |
| do_command(cam, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0); |
| |
| /* set camera to a known state */ |
| return set_camera_state(cam); |
| } |
| |
| static void put_cam(struct cpia_camera_ops* ops) |
| { |
| if (ops->owner) |
| module_put(ops->owner); |
| } |
| |
| /* ------------------------- V4L interface --------------------- */ |
| static int cpia_open(struct inode *inode, struct file *file) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct cam_data *cam = dev->priv; |
| int err; |
| |
| if (!cam) { |
| DBG("Internal error, cam_data not found!\n"); |
| return -ENODEV; |
| } |
| |
| if (cam->open_count > 0) { |
| DBG("Camera already open\n"); |
| return -EBUSY; |
| } |
| |
| if (!try_module_get(cam->ops->owner)) |
| return -ENODEV; |
| |
| down(&cam->busy_lock); |
| err = -ENOMEM; |
| if (!cam->raw_image) { |
| cam->raw_image = rvmalloc(CPIA_MAX_IMAGE_SIZE); |
| if (!cam->raw_image) |
| goto oops; |
| } |
| |
| if (!cam->decompressed_frame.data) { |
| cam->decompressed_frame.data = rvmalloc(CPIA_MAX_FRAME_SIZE); |
| if (!cam->decompressed_frame.data) |
| goto oops; |
| } |
| |
| /* open cpia */ |
| err = -ENODEV; |
| if (cam->ops->open(cam->lowlevel_data)) |
| goto oops; |
| |
| /* reset the camera */ |
| if ((err = reset_camera(cam)) != 0) { |
| cam->ops->close(cam->lowlevel_data); |
| goto oops; |
| } |
| |
| err = -EINTR; |
| if(signal_pending(current)) |
| goto oops; |
| |
| /* Set ownership of /proc/cpia/videoX to current user */ |
| if(cam->proc_entry) |
| cam->proc_entry->uid = current->uid; |
| |
| /* set mark for loading first frame uncompressed */ |
| cam->first_frame = 1; |
| |
| /* init it to something */ |
| cam->mmap_kludge = 0; |
| |
| ++cam->open_count; |
| file->private_data = dev; |
| up(&cam->busy_lock); |
| return 0; |
| |
| oops: |
| if (cam->decompressed_frame.data) { |
| rvfree(cam->decompressed_frame.data, CPIA_MAX_FRAME_SIZE); |
| cam->decompressed_frame.data = NULL; |
| } |
| if (cam->raw_image) { |
| rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE); |
| cam->raw_image = NULL; |
| } |
| up(&cam->busy_lock); |
| put_cam(cam->ops); |
| return err; |
| } |
| |
| static int cpia_close(struct inode *inode, struct file *file) |
| { |
| struct video_device *dev = file->private_data; |
| struct cam_data *cam = dev->priv; |
| |
| if (cam->ops) { |
| /* Return ownership of /proc/cpia/videoX to root */ |
| if(cam->proc_entry) |
| cam->proc_entry->uid = 0; |
| |
| /* save camera state for later open (developers guide ch 3.5.3) */ |
| save_camera_state(cam); |
| |
| /* GotoLoPower */ |
| goto_low_power(cam); |
| |
| /* Update the camera status */ |
| do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); |
| |
| /* cleanup internal state stuff */ |
| free_frames(cam->frame); |
| |
| /* close cpia */ |
| cam->ops->close(cam->lowlevel_data); |
| |
| put_cam(cam->ops); |
| } |
| |
| if (--cam->open_count == 0) { |
| /* clean up capture-buffers */ |
| if (cam->raw_image) { |
| rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE); |
| cam->raw_image = NULL; |
| } |
| |
| if (cam->decompressed_frame.data) { |
| rvfree(cam->decompressed_frame.data, CPIA_MAX_FRAME_SIZE); |
| cam->decompressed_frame.data = NULL; |
| } |
| |
| if (cam->frame_buf) |
| free_frame_buf(cam); |
| |
| if (!cam->ops) |
| kfree(cam); |
| } |
| file->private_data = NULL; |
| |
| return 0; |
| } |
| |
| static ssize_t cpia_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct video_device *dev = file->private_data; |
| struct cam_data *cam = dev->priv; |
| int err; |
| |
| /* make this _really_ smp and multithread-safe */ |
| if (down_interruptible(&cam->busy_lock)) |
| return -EINTR; |
| |
| if (!buf) { |
| DBG("buf NULL\n"); |
| up(&cam->busy_lock); |
| return -EINVAL; |
| } |
| |
| if (!count) { |
| DBG("count 0\n"); |
| up(&cam->busy_lock); |
| return 0; |
| } |
| |
| if (!cam->ops) { |
| DBG("ops NULL\n"); |
| up(&cam->busy_lock); |
| return -ENODEV; |
| } |
| |
| /* upload frame */ |
| cam->decompressed_frame.state = FRAME_READY; |
| cam->mmap_kludge=0; |
| if((err = fetch_frame(cam)) != 0) { |
| DBG("ERROR from fetch_frame: %d\n", err); |
| up(&cam->busy_lock); |
| return err; |
| } |
| cam->decompressed_frame.state = FRAME_UNUSED; |
| |
| /* copy data to user space */ |
| if (cam->decompressed_frame.count > count) { |
| DBG("count wrong: %d, %lu\n", cam->decompressed_frame.count, |
| (unsigned long) count); |
| up(&cam->busy_lock); |
| return -EFAULT; |
| } |
| if (copy_to_user(buf, cam->decompressed_frame.data, |
| cam->decompressed_frame.count)) { |
| DBG("copy_to_user failed\n"); |
| up(&cam->busy_lock); |
| return -EFAULT; |
| } |
| |
| up(&cam->busy_lock); |
| return cam->decompressed_frame.count; |
| } |
| |
| static int cpia_do_ioctl(struct inode *inode, struct file *file, |
| unsigned int ioctlnr, void *arg) |
| { |
| struct video_device *dev = file->private_data; |
| struct cam_data *cam = dev->priv; |
| int retval = 0; |
| |
| if (!cam || !cam->ops) |
| return -ENODEV; |
| |
| /* make this _really_ smp-safe */ |
| if (down_interruptible(&cam->busy_lock)) |
| return -EINTR; |
| |
| //DBG("cpia_ioctl: %u\n", ioctlnr); |
| |
| switch (ioctlnr) { |
| /* query capabilites */ |
| case VIDIOCGCAP: |
| { |
| struct video_capability *b = arg; |
| |
| DBG("VIDIOCGCAP\n"); |
| strcpy(b->name, "CPiA Camera"); |
| b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE; |
| b->channels = 1; |
| b->audios = 0; |
| b->maxwidth = 352; /* VIDEOSIZE_CIF */ |
| b->maxheight = 288; |
| b->minwidth = 48; /* VIDEOSIZE_48_48 */ |
| b->minheight = 48; |
| break; |
| } |
| |
| /* get/set video source - we are a camera and nothing else */ |
| case VIDIOCGCHAN: |
| { |
| struct video_channel *v = arg; |
| |
| DBG("VIDIOCGCHAN\n"); |
| if (v->channel != 0) { |
| retval = -EINVAL; |
| break; |
| } |
| |
| v->channel = 0; |
| strcpy(v->name, "Camera"); |
| v->tuners = 0; |
| v->flags = 0; |
| v->type = VIDEO_TYPE_CAMERA; |
| v->norm = 0; |
| break; |
| } |
| |
| case VIDIOCSCHAN: |
| { |
| struct video_channel *v = arg; |
| |
| DBG("VIDIOCSCHAN\n"); |
| if (v->channel != 0) |
| retval = -EINVAL; |
| break; |
| } |
| |
| /* image properties */ |
| case VIDIOCGPICT: |
| { |
| struct video_picture *pic = arg; |
| DBG("VIDIOCGPICT\n"); |
| *pic = cam->vp; |
| break; |
| } |
| |
| case VIDIOCSPICT: |
| { |
| struct video_picture *vp = arg; |
| |
| DBG("VIDIOCSPICT\n"); |
| |
| /* check validity */ |
| DBG("palette: %d\n", vp->palette); |
| DBG("depth: %d\n", vp->depth); |
| if (!valid_mode(vp->palette, vp->depth)) { |
| retval = -EINVAL; |
| break; |
| } |
| |
| down(&cam->param_lock); |
| /* brightness, colour, contrast need no check 0-65535 */ |
| cam->vp = *vp; |
| /* update cam->params.colourParams */ |
| cam->params.colourParams.brightness = vp->brightness*100/65535; |
| cam->params.colourParams.contrast = vp->contrast*100/65535; |
| cam->params.colourParams.saturation = vp->colour*100/65535; |
| /* contrast is in steps of 8, so round */ |
| cam->params.colourParams.contrast = |
| ((cam->params.colourParams.contrast + 3) / 8) * 8; |
| if (cam->params.version.firmwareVersion == 1 && |
| cam->params.version.firmwareRevision == 2 && |
| cam->params.colourParams.contrast > 80) { |
| /* 1-02 firmware limits contrast to 80 */ |
| cam->params.colourParams.contrast = 80; |
| } |
| |
| /* Adjust flicker control if necessary */ |
| if(cam->params.flickerControl.allowableOverExposure < 0) |
| cam->params.flickerControl.allowableOverExposure = |
| -find_over_exposure(cam->params.colourParams.brightness); |
| if(cam->params.flickerControl.flickerMode != 0) |
| cam->cmd_queue |= COMMAND_SETFLICKERCTRL; |
| |
| |
| /* queue command to update camera */ |
| cam->cmd_queue |= COMMAND_SETCOLOURPARAMS; |
| up(&cam->param_lock); |
| DBG("VIDIOCSPICT: %d / %d // %d / %d / %d / %d\n", |
| vp->depth, vp->palette, vp->brightness, vp->hue, vp->colour, |
| vp->contrast); |
| break; |
| } |
| |
| /* get/set capture window */ |
| case VIDIOCGWIN: |
| { |
| struct video_window *vw = arg; |
| DBG("VIDIOCGWIN\n"); |
| |
| *vw = cam->vw; |
| break; |
| } |
| |
| case VIDIOCSWIN: |
| { |
| /* copy_from_user, check validity, copy to internal structure */ |
| struct video_window *vw = arg; |
| DBG("VIDIOCSWIN\n"); |
| |
| if (vw->clipcount != 0) { /* clipping not supported */ |
| retval = -EINVAL; |
| break; |
| } |
| if (vw->clips != NULL) { /* clipping not supported */ |
| retval = -EINVAL; |
| break; |
| } |
| |
| /* we set the video window to something smaller or equal to what |
| * is requested by the user??? |
| */ |
| down(&cam->param_lock); |
| if (vw->width != cam->vw.width || vw->height != cam->vw.height) { |
| int video_size = match_videosize(vw->width, vw->height); |
| |
| if (video_size < 0) { |
| retval = -EINVAL; |
| up(&cam->param_lock); |
| break; |
| } |
| cam->video_size = video_size; |
| |
| /* video size is changing, reset the subcapture area */ |
| memset(&cam->vc, 0, sizeof(cam->vc)); |
| |
| set_vw_size(cam); |
| DBG("%d / %d\n", cam->vw.width, cam->vw.height); |
| cam->cmd_queue |= COMMAND_SETFORMAT; |
| } |
| |
| up(&cam->param_lock); |
| |
| /* setformat ignored by camera during streaming, |
| * so stop/dispatch/start */ |
| if (cam->cmd_queue & COMMAND_SETFORMAT) { |
| DBG("\n"); |
| dispatch_commands(cam); |
| } |
| DBG("%d/%d:%d\n", cam->video_size, |
| cam->vw.width, cam->vw.height); |
| break; |
| } |
| |
| /* mmap interface */ |
| case VIDIOCGMBUF: |
| { |
| struct video_mbuf *vm = arg; |
| int i; |
| |
| DBG("VIDIOCGMBUF\n"); |
| memset(vm, 0, sizeof(*vm)); |
| vm->size = CPIA_MAX_FRAME_SIZE*FRAME_NUM; |
| vm->frames = FRAME_NUM; |
| for (i = 0; i < FRAME_NUM; i++) |
| vm->offsets[i] = CPIA_MAX_FRAME_SIZE * i; |
| break; |
| } |
| |
| case VIDIOCMCAPTURE: |
| { |
| struct video_mmap *vm = arg; |
| int video_size; |
| |
| DBG("VIDIOCMCAPTURE: %d / %d / %dx%d\n", vm->format, vm->frame, |
| vm->width, vm->height); |
| if (vm->frame<0||vm->frame>=FRAME_NUM) { |
| retval = -EINVAL; |
| break; |
| } |
| |
| /* set video format */ |
| cam->vp.palette = vm->format; |
| switch(vm->format) { |
| case VIDEO_PALETTE_GREY: |
| cam->vp.depth=8; |
| break; |
| case VIDEO_PALETTE_RGB555: |
| case VIDEO_PALETTE_RGB565: |
| case VIDEO_PALETTE_YUV422: |
| case VIDEO_PALETTE_YUYV: |
| case VIDEO_PALETTE_UYVY: |
| cam->vp.depth = 16; |
| break; |
| case VIDEO_PALETTE_RGB24: |
| cam->vp.depth = 24; |
| break; |
| case VIDEO_PALETTE_RGB32: |
| cam->vp.depth = 32; |
| break; |
| default: |
| retval = -EINVAL; |
| break; |
| } |
| if (retval) |
| break; |
| |
| /* set video size */ |
| video_size = match_videosize(vm->width, vm->height); |
| if (video_size < 0) { |
| retval = -EINVAL; |
| break; |
| } |
| if (video_size != cam->video_size) { |
| cam->video_size = video_size; |
| |
| /* video size is changing, reset the subcapture area */ |
| memset(&cam->vc, 0, sizeof(cam->vc)); |
| |
| set_vw_size(cam); |
| cam->cmd_queue |= COMMAND_SETFORMAT; |
| dispatch_commands(cam); |
| } |
| /* according to v4l-spec we must start streaming here */ |
| cam->mmap_kludge = 1; |
| retval = capture_frame(cam, vm); |
| |
| break; |
| } |
| |
| case VIDIOCSYNC: |
| { |
| int *frame = arg; |
| |
| //DBG("VIDIOCSYNC: %d\n", *frame); |
| |
| if (*frame<0 || *frame >= FRAME_NUM) { |
| retval = -EINVAL; |
| break; |
| } |
| |
| switch (cam->frame[*frame].state) { |
| case FRAME_UNUSED: |
| case FRAME_READY: |
| case FRAME_GRABBING: |
| DBG("sync to unused frame %d\n", *frame); |
| retval = -EINVAL; |
| break; |
| |
| case FRAME_DONE: |
| cam->frame[*frame].state = FRAME_UNUSED; |
| //DBG("VIDIOCSYNC: %d synced\n", *frame); |
| break; |
| } |
| if (retval == -EINTR) { |
| /* FIXME - xawtv does not handle this nice */ |
| retval = 0; |
| } |
| break; |
| } |
| |
| case VIDIOCGCAPTURE: |
| { |
| struct video_capture *vc = arg; |
| |
| DBG("VIDIOCGCAPTURE\n"); |
| |
| *vc = cam->vc; |
| |
| break; |
| } |
| |
| case VIDIOCSCAPTURE: |
| { |
| struct video_capture *vc = arg; |
| |
| DBG("VIDIOCSCAPTURE\n"); |
| |
| if (vc->decimation != 0) { /* How should this be used? */ |
| retval = -EINVAL; |
| break; |
| } |
| if (vc->flags != 0) { /* Even/odd grab not supported */ |
| retval = -EINVAL; |
| break; |
| } |
| |
| /* Clip to the resolution we can set for the ROI |
| (every 8 columns and 4 rows) */ |
| vc->x = vc->x & ~(__u32)7; |
| vc->y = vc->y & ~(__u32)3; |
| vc->width = vc->width & ~(__u32)7; |
| vc->height = vc->height & ~(__u32)3; |
| |
| if(vc->width == 0 || vc->height == 0 || |
| vc->x + vc->width > cam->vw.width || |
| vc->y + vc->height > cam->vw.height) { |
| retval = -EINVAL; |
| break; |
| } |
| |
| DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height); |
| |
| down(&cam->param_lock); |
| |
| cam->vc.x = vc->x; |
| cam->vc.y = vc->y; |
| cam->vc.width = vc->width; |
| cam->vc.height = vc->height; |
| |
| set_vw_size(cam); |
| cam->cmd_queue |= COMMAND_SETFORMAT; |
| |
| up(&cam->param_lock); |
| |
| /* setformat ignored by camera during streaming, |
| * so stop/dispatch/start */ |
| dispatch_commands(cam); |
| break; |
| } |
| |
| case VIDIOCGUNIT: |
| { |
| struct video_unit *vu = arg; |
| |
| DBG("VIDIOCGUNIT\n"); |
| |
| vu->video = cam->vdev.minor; |
| vu->vbi = VIDEO_NO_UNIT; |
| vu->radio = VIDEO_NO_UNIT; |
| vu->audio = VIDEO_NO_UNIT; |
| vu->teletext = VIDEO_NO_UNIT; |
| |
| break; |
| } |
| |
| |
| /* pointless to implement overlay with this camera */ |
| case VIDIOCCAPTURE: |
| case VIDIOCGFBUF: |
| case VIDIOCSFBUF: |
| case VIDIOCKEY: |
| /* tuner interface - we have none */ |
| case VIDIOCGTUNER: |
| case VIDIOCSTUNER: |
| case VIDIOCGFREQ: |
| case VIDIOCSFREQ: |
| /* audio interface - we have none */ |
| case VIDIOCGAUDIO: |
| case VIDIOCSAUDIO: |
| retval = -EINVAL; |
| break; |
| default: |
| retval = -ENOIOCTLCMD; |
| break; |
| } |
| |
| up(&cam->busy_lock); |
| return retval; |
| } |
| |
| static int cpia_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| return video_usercopy(inode, file, cmd, arg, cpia_do_ioctl); |
| } |
| |
| |
| /* FIXME */ |
| static int cpia_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct video_device *dev = file->private_data; |
| unsigned long start = vma->vm_start; |
| unsigned long size = vma->vm_end - vma->vm_start; |
| unsigned long page, pos; |
| struct cam_data *cam = dev->priv; |
| int retval; |
| |
| if (!cam || !cam->ops) |
| return -ENODEV; |
| |
| DBG("cpia_mmap: %ld\n", size); |
| |
| if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE) |
| return -EINVAL; |
| |
| if (!cam || !cam->ops) |
| return -ENODEV; |
| |
| /* make this _really_ smp-safe */ |
| if (down_interruptible(&cam->busy_lock)) |
| return -EINTR; |
| |
| if (!cam->frame_buf) { /* we do lazy allocation */ |
| if ((retval = allocate_frame_buf(cam))) { |
| up(&cam->busy_lock); |
| return retval; |
| } |
| } |
| |
| pos = (unsigned long)(cam->frame_buf); |
| while (size > 0) { |
| page = vmalloc_to_pfn((void *)pos); |
| if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { |
| up(&cam->busy_lock); |
| return -EAGAIN; |
| } |
| start += PAGE_SIZE; |
| pos += PAGE_SIZE; |
| if (size > PAGE_SIZE) |
| size -= PAGE_SIZE; |
| else |
| size = 0; |
| } |
| |
| DBG("cpia_mmap: %ld\n", size); |
| up(&cam->busy_lock); |
| |
| return 0; |
| } |
| |
| static struct file_operations cpia_fops = { |
| .owner = THIS_MODULE, |
| .open = cpia_open, |
| .release = cpia_close, |
| .read = cpia_read, |
| .mmap = cpia_mmap, |
| .ioctl = cpia_ioctl, |
| .llseek = no_llseek, |
| }; |
| |
| static struct video_device cpia_template = { |
| .owner = THIS_MODULE, |
| .name = "CPiA Camera", |
| .type = VID_TYPE_CAPTURE, |
| .hardware = VID_HARDWARE_CPIA, |
| .fops = &cpia_fops, |
| }; |
| |
| /* initialise cam_data structure */ |
| static void reset_camera_struct(struct cam_data *cam) |
| { |
| /* The following parameter values are the defaults from |
| * "Software Developer's Guide for CPiA Cameras". Any changes |
| * to the defaults are noted in comments. */ |
| cam->params.colourParams.brightness = 50; |
| cam->params.colourParams.contrast = 48; |
| cam->params.colourParams.saturation = 50; |
| cam->params.exposure.gainMode = 4; |
| cam->params.exposure.expMode = 2; /* AEC */ |
| cam->params.exposure.compMode = 1; |
| cam->params.exposure.centreWeight = 1; |
| cam->params.exposure.gain = 0; |
| cam->params.exposure.fineExp = 0; |
| cam->params.exposure.coarseExpLo = 185; |
| cam->params.exposure.coarseExpHi = 0; |
| cam->params.exposure.redComp = COMP_RED; |
| cam->params.exposure.green1Comp = COMP_GREEN1; |
| cam->params.exposure.green2Comp = COMP_GREEN2; |
| cam->params.exposure.blueComp = COMP_BLUE; |
| cam->params.colourBalance.balanceMode = 2; /* ACB */ |
| cam->params.colourBalance.redGain = 32; |
| cam->params.colourBalance.greenGain = 6; |
| cam->params.colourBalance.blueGain = 92; |
| cam->params.apcor.gain1 = 0x18; |
| cam->params.apcor.gain2 = 0x16; |
| cam->params.apcor.gain4 = 0x24; |
| cam->params.apcor.gain8 = 0x34; |
| cam->params.flickerControl.flickerMode = 0; |
| cam->params.flickerControl.disabled = 1; |
| |
| cam->params.flickerControl.coarseJump = |
| flicker_jumps[cam->mainsFreq] |
| [cam->params.sensorFps.baserate] |
| [cam->params.sensorFps.divisor]; |
| cam->params.flickerControl.allowableOverExposure = |
| -find_over_exposure(cam->params.colourParams.brightness); |
| cam->params.vlOffset.gain1 = 20; |
| cam->params.vlOffset.gain2 = 24; |
| cam->params.vlOffset.gain4 = 26; |
| cam->params.vlOffset.gain8 = 26; |
| cam->params.compressionParams.hysteresis = 3; |
| cam->params.compressionParams.threshMax = 11; |
| cam->params.compressionParams.smallStep = 1; |
| cam->params.compressionParams.largeStep = 3; |
| cam->params.compressionParams.decimationHysteresis = 2; |
| cam->params.compressionParams.frDiffStepThresh = 5; |
| cam->params.compressionParams.qDiffStepThresh = 3; |
| cam->params.compressionParams.decimationThreshMod = 2; |
| /* End of default values from Software Developer's Guide */ |
| |
| cam->transfer_rate = 0; |
| cam->exposure_status = EXPOSURE_NORMAL; |
| |
| /* Set Sensor FPS to 15fps. This seems better than 30fps |
| * for indoor lighting. */ |
| cam->params.sensorFps.divisor = 1; |
| cam->params.sensorFps.baserate = 1; |
| |
| cam->params.yuvThreshold.yThreshold = 6; /* From windows driver */ |
| cam->params.yuvThreshold.uvThreshold = 6; /* From windows driver */ |
| |
| cam->params.format.subSample = SUBSAMPLE_422; |
| cam->params.format.yuvOrder = YUVORDER_YUYV; |
| |
| cam->params.compression.mode = CPIA_COMPRESSION_AUTO; |
| cam->params.compressionTarget.frTargeting = |
| CPIA_COMPRESSION_TARGET_QUALITY; |
| cam->params.compressionTarget.targetFR = 15; /* From windows driver */ |
| cam->params.compressionTarget.targetQ = 5; /* From windows driver */ |
| |
| cam->params.qx3.qx3_detected = 0; |
| cam->params.qx3.toplight = 0; |
| cam->params.qx3.bottomlight = 0; |
| cam->params.qx3.button = 0; |
| cam->params.qx3.cradled = 0; |
| |
| cam->video_size = VIDEOSIZE_CIF; |
| |
| cam->vp.colour = 32768; /* 50% */ |
| cam->vp.hue = 32768; /* 50% */ |
| cam->vp.brightness = 32768; /* 50% */ |
| cam->vp.contrast = 32768; /* 50% */ |
| cam->vp.whiteness = 0; /* not used -> grayscale only */ |
| cam->vp.depth = 24; /* to be set by user */ |
| cam->vp.palette = VIDEO_PALETTE_RGB24; /* to be set by user */ |
| |
| cam->vc.x = 0; |
| cam->vc.y = 0; |
| cam->vc.width = 0; |
| cam->vc.height = 0; |
| |
| cam->vw.x = 0; |
| cam->vw.y = 0; |
| set_vw_size(cam); |
| cam->vw.chromakey = 0; |
| cam->vw.flags = 0; |
| cam->vw.clipcount = 0; |
| cam->vw.clips = NULL; |
| |
| cam->cmd_queue = COMMAND_NONE; |
| cam->first_frame = 1; |
| |
| return; |
| } |
| |
| /* initialize cam_data structure */ |
| static void init_camera_struct(struct cam_data *cam, |
| struct cpia_camera_ops *ops ) |
| { |
| int i; |
| |
| /* Default everything to 0 */ |
| memset(cam, 0, sizeof(struct cam_data)); |
| |
| cam->ops = ops; |
| init_MUTEX(&cam->param_lock); |
| init_MUTEX(&cam->busy_lock); |
| |
| reset_camera_struct(cam); |
| |
| cam->proc_entry = NULL; |
| |
| memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template)); |
| cam->vdev.priv = cam; |
| |
| cam->curframe = 0; |
| for (i = 0; i < FRAME_NUM; i++) { |
| cam->frame[i].width = 0; |
| cam->frame[i].height = 0; |
| cam->frame[i].state = FRAME_UNUSED; |
| cam->frame[i].data = NULL; |
| } |
| cam->decompressed_frame.width = 0; |
| cam->decompressed_frame.height = 0; |
| cam->decompressed_frame.state = FRAME_UNUSED; |
| cam->decompressed_frame.data = NULL; |
| } |
| |
| struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel) |
| { |
| struct cam_data *camera; |
| |
| if ((camera = kmalloc(sizeof(struct cam_data), GFP_KERNEL)) == NULL) |
| return NULL; |
| |
| |
| init_camera_struct( camera, ops ); |
| camera->lowlevel_data = lowlevel; |
| |
| /* register v4l device */ |
| if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { |
| kfree(camera); |
| printk(KERN_DEBUG "video_register_device failed\n"); |
| return NULL; |
| } |
| |
| /* get version information from camera: open/reset/close */ |
| |
| /* open cpia */ |
| if (camera->ops->open(camera->lowlevel_data)) |
| return camera; |
| |
| /* reset the camera */ |
| if (reset_camera(camera) != 0) { |
| camera->ops->close(camera->lowlevel_data); |
| return camera; |
| } |
| |
| /* close cpia */ |
| camera->ops->close(camera->lowlevel_data); |
| |
| #ifdef CONFIG_PROC_FS |
| create_proc_cpia_cam(camera); |
| #endif |
| |
| printk(KERN_INFO " CPiA Version: %d.%02d (%d.%d)\n", |
| camera->params.version.firmwareVersion, |
| camera->params.version.firmwareRevision, |
| camera->params.version.vcVersion, |
| camera->params.version.vcRevision); |
| printk(KERN_INFO " CPiA PnP-ID: %04x:%04x:%04x\n", |
| camera->params.pnpID.vendor, |
| camera->params.pnpID.product, |
| camera->params.pnpID.deviceRevision); |
| printk(KERN_INFO " VP-Version: %d.%d %04x\n", |
| camera->params.vpVersion.vpVersion, |
| camera->params.vpVersion.vpRevision, |
| camera->params.vpVersion.cameraHeadID); |
| |
| return camera; |
| } |
| |
| void cpia_unregister_camera(struct cam_data *cam) |
| { |
| DBG("unregistering video\n"); |
| video_unregister_device(&cam->vdev); |
| if (cam->open_count) { |
| put_cam(cam->ops); |
| DBG("camera open -- setting ops to NULL\n"); |
| cam->ops = NULL; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor); |
| destroy_proc_cpia_cam(cam); |
| #endif |
| if (!cam->open_count) { |
| DBG("freeing camera\n"); |
| kfree(cam); |
| } |
| } |
| |
| static int __init cpia_init(void) |
| { |
| printk(KERN_INFO "%s v%d.%d.%d\n", ABOUT, |
| CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER); |
| |
| printk(KERN_WARNING "Since in-kernel colorspace conversion is not " |
| "allowed, it is disabled by default now. Users should fix the " |
| "applications in case they don't work without conversion " |
| "reenabled by setting the 'colorspace_conv' module " |
| "parameter to 1"); |
| |
| #ifdef CONFIG_PROC_FS |
| proc_cpia_create(); |
| #endif |
| |
| #ifdef CONFIG_VIDEO_CPIA_PP |
| cpia_pp_init(); |
| #endif |
| #ifdef CONFIG_VIDEO_CPIA_USB |
| cpia_usb_init(); |
| #endif |
| |
| return 0; |
| } |
| |
| static void __exit cpia_exit(void) |
| { |
| #ifdef CONFIG_PROC_FS |
| proc_cpia_destroy(); |
| #endif |
| } |
| |
| module_init(cpia_init); |
| module_exit(cpia_exit); |
| |
| /* Exported symbols for modules. */ |
| |
| EXPORT_SYMBOL(cpia_register_camera); |
| EXPORT_SYMBOL(cpia_unregister_camera); |