| /* |
| * Macintosh IDE Driver |
| * |
| * Copyright (C) 1998 by Michael Schmitz |
| * |
| * This driver was written based on information obtained from the MacOS IDE |
| * driver binary by Mikael Forselius |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/ide.h> |
| |
| #include <asm/macintosh.h> |
| #include <asm/macints.h> |
| #include <asm/mac_baboon.h> |
| |
| #define IDE_BASE 0x50F1A000 /* Base address of IDE controller */ |
| |
| /* |
| * Generic IDE registers as offsets from the base |
| * These match MkLinux so they should be correct. |
| */ |
| |
| #define IDE_CONTROL 0x38 /* control/altstatus */ |
| |
| /* |
| * Mac-specific registers |
| */ |
| |
| /* |
| * this register is odd; it doesn't seem to do much and it's |
| * not word-aligned like virtually every other hardware register |
| * on the Mac... |
| */ |
| |
| #define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra: |
| * |
| * Bit 0+1: some interrupt flags |
| * Bit 2+3: some interrupt enable |
| * Bit 4: ?? |
| * Bit 5: IDE interrupt flag (any hwif) |
| * Bit 6: maybe IDE interrupt enable (any hwif) ?? |
| * Bit 7: Any interrupt condition |
| */ |
| |
| volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR); |
| |
| int macide_test_irq(ide_hwif_t *hwif) |
| { |
| if (*ide_ifr & 0x20) |
| return 1; |
| return 0; |
| } |
| |
| static void macide_clear_irq(ide_drive_t *drive) |
| { |
| *ide_ifr &= ~0x20; |
| } |
| |
| static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base, |
| int irq) |
| { |
| int i; |
| |
| memset(hw, 0, sizeof(*hw)); |
| |
| for (i = 0; i < 8; i++) |
| hw->io_ports_array[i] = base + i * 4; |
| |
| hw->io_ports.ctl_addr = base + IDE_CONTROL; |
| |
| hw->irq = irq; |
| } |
| |
| static const struct ide_port_ops macide_port_ops = { |
| .clear_irq = macide_clear_irq, |
| .test_irq = macide_test_irq, |
| }; |
| |
| static const struct ide_port_info macide_port_info = { |
| .port_ops = &macide_port_ops, |
| .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, |
| .irq_flags = IRQF_SHARED, |
| .chipset = ide_generic, |
| }; |
| |
| static const char *mac_ide_name[] = |
| { "Quadra", "Powerbook", "Powerbook Baboon" }; |
| |
| /* |
| * Probe for a Macintosh IDE interface |
| */ |
| |
| static int __init macide_init(void) |
| { |
| unsigned long base; |
| int irq; |
| struct ide_hw hw, *hws[] = { &hw }; |
| struct ide_port_info d = macide_port_info; |
| |
| if (!MACH_IS_MAC) |
| return -ENODEV; |
| |
| switch (macintosh_config->ide_type) { |
| case MAC_IDE_QUADRA: |
| base = IDE_BASE; |
| irq = IRQ_NUBUS_F; |
| break; |
| case MAC_IDE_PB: |
| base = IDE_BASE; |
| irq = IRQ_NUBUS_C; |
| break; |
| case MAC_IDE_BABOON: |
| base = BABOON_BASE; |
| d.port_ops = NULL; |
| irq = IRQ_BABOON_1; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| printk(KERN_INFO "ide: Macintosh %s IDE controller\n", |
| mac_ide_name[macintosh_config->ide_type - 1]); |
| |
| macide_setup_ports(&hw, base, irq); |
| |
| return ide_host_add(&d, hws, 1, NULL); |
| } |
| |
| module_init(macide_init); |
| |
| MODULE_LICENSE("GPL"); |