| /* |
| * RapidIO interconnect services |
| * (RapidIO Interconnect Specification, http://www.rapidio.org) |
| * |
| * Copyright 2005 MontaVista Software, Inc. |
| * Matt Porter <mporter@kernel.crashing.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/rio.h> |
| #include <linux/rio_drv.h> |
| #include <linux/rio_ids.h> |
| #include <linux/rio_regs.h> |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| |
| #include "rio.h" |
| |
| static LIST_HEAD(rio_mports); |
| |
| /** |
| * rio_local_get_device_id - Get the base/extended device id for a port |
| * @port: RIO master port from which to get the deviceid |
| * |
| * Reads the base/extended device id from the local device |
| * implementing the master port. Returns the 8/16-bit device |
| * id. |
| */ |
| u16 rio_local_get_device_id(struct rio_mport *port) |
| { |
| u32 result; |
| |
| rio_local_read_config_32(port, RIO_DID_CSR, &result); |
| |
| return (RIO_GET_DID(result)); |
| } |
| |
| /** |
| * rio_request_inb_mbox - request inbound mailbox service |
| * @mport: RIO master port from which to allocate the mailbox resource |
| * @dev_id: Device specific pointer to pass on event |
| * @mbox: Mailbox number to claim |
| * @entries: Number of entries in inbound mailbox queue |
| * @minb: Callback to execute when inbound message is received |
| * |
| * Requests ownership of an inbound mailbox resource and binds |
| * a callback function to the resource. Returns %0 on success. |
| */ |
| int rio_request_inb_mbox(struct rio_mport *mport, |
| void *dev_id, |
| int mbox, |
| int entries, |
| void (*minb) (struct rio_mport * mport, void *dev_id, int mbox, |
| int slot)) |
| { |
| int rc = 0; |
| |
| struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); |
| |
| if (res) { |
| rio_init_mbox_res(res, mbox, mbox); |
| |
| /* Make sure this mailbox isn't in use */ |
| if ((rc = |
| request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE], |
| res)) < 0) { |
| kfree(res); |
| goto out; |
| } |
| |
| mport->inb_msg[mbox].res = res; |
| |
| /* Hook the inbound message callback */ |
| mport->inb_msg[mbox].mcback = minb; |
| |
| rc = rio_open_inb_mbox(mport, dev_id, mbox, entries); |
| } else |
| rc = -ENOMEM; |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * rio_release_inb_mbox - release inbound mailbox message service |
| * @mport: RIO master port from which to release the mailbox resource |
| * @mbox: Mailbox number to release |
| * |
| * Releases ownership of an inbound mailbox resource. Returns 0 |
| * if the request has been satisfied. |
| */ |
| int rio_release_inb_mbox(struct rio_mport *mport, int mbox) |
| { |
| rio_close_inb_mbox(mport, mbox); |
| |
| /* Release the mailbox resource */ |
| return release_resource(mport->inb_msg[mbox].res); |
| } |
| |
| /** |
| * rio_request_outb_mbox - request outbound mailbox service |
| * @mport: RIO master port from which to allocate the mailbox resource |
| * @dev_id: Device specific pointer to pass on event |
| * @mbox: Mailbox number to claim |
| * @entries: Number of entries in outbound mailbox queue |
| * @moutb: Callback to execute when outbound message is sent |
| * |
| * Requests ownership of an outbound mailbox resource and binds |
| * a callback function to the resource. Returns 0 on success. |
| */ |
| int rio_request_outb_mbox(struct rio_mport *mport, |
| void *dev_id, |
| int mbox, |
| int entries, |
| void (*moutb) (struct rio_mport * mport, void *dev_id, int mbox, int slot)) |
| { |
| int rc = 0; |
| |
| struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); |
| |
| if (res) { |
| rio_init_mbox_res(res, mbox, mbox); |
| |
| /* Make sure this outbound mailbox isn't in use */ |
| if ((rc = |
| request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE], |
| res)) < 0) { |
| kfree(res); |
| goto out; |
| } |
| |
| mport->outb_msg[mbox].res = res; |
| |
| /* Hook the inbound message callback */ |
| mport->outb_msg[mbox].mcback = moutb; |
| |
| rc = rio_open_outb_mbox(mport, dev_id, mbox, entries); |
| } else |
| rc = -ENOMEM; |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * rio_release_outb_mbox - release outbound mailbox message service |
| * @mport: RIO master port from which to release the mailbox resource |
| * @mbox: Mailbox number to release |
| * |
| * Releases ownership of an inbound mailbox resource. Returns 0 |
| * if the request has been satisfied. |
| */ |
| int rio_release_outb_mbox(struct rio_mport *mport, int mbox) |
| { |
| rio_close_outb_mbox(mport, mbox); |
| |
| /* Release the mailbox resource */ |
| return release_resource(mport->outb_msg[mbox].res); |
| } |
| |
| /** |
| * rio_setup_inb_dbell - bind inbound doorbell callback |
| * @mport: RIO master port to bind the doorbell callback |
| * @dev_id: Device specific pointer to pass on event |
| * @res: Doorbell message resource |
| * @dinb: Callback to execute when doorbell is received |
| * |
| * Adds a doorbell resource/callback pair into a port's |
| * doorbell event list. Returns 0 if the request has been |
| * satisfied. |
| */ |
| static int |
| rio_setup_inb_dbell(struct rio_mport *mport, void *dev_id, struct resource *res, |
| void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, u16 dst, |
| u16 info)) |
| { |
| int rc = 0; |
| struct rio_dbell *dbell; |
| |
| if (!(dbell = kmalloc(sizeof(struct rio_dbell), GFP_KERNEL))) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| dbell->res = res; |
| dbell->dinb = dinb; |
| dbell->dev_id = dev_id; |
| |
| list_add_tail(&dbell->node, &mport->dbells); |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * rio_request_inb_dbell - request inbound doorbell message service |
| * @mport: RIO master port from which to allocate the doorbell resource |
| * @dev_id: Device specific pointer to pass on event |
| * @start: Doorbell info range start |
| * @end: Doorbell info range end |
| * @dinb: Callback to execute when doorbell is received |
| * |
| * Requests ownership of an inbound doorbell resource and binds |
| * a callback function to the resource. Returns 0 if the request |
| * has been satisfied. |
| */ |
| int rio_request_inb_dbell(struct rio_mport *mport, |
| void *dev_id, |
| u16 start, |
| u16 end, |
| void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, |
| u16 dst, u16 info)) |
| { |
| int rc = 0; |
| |
| struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); |
| |
| if (res) { |
| rio_init_dbell_res(res, start, end); |
| |
| /* Make sure these doorbells aren't in use */ |
| if ((rc = |
| request_resource(&mport->riores[RIO_DOORBELL_RESOURCE], |
| res)) < 0) { |
| kfree(res); |
| goto out; |
| } |
| |
| /* Hook the doorbell callback */ |
| rc = rio_setup_inb_dbell(mport, dev_id, res, dinb); |
| } else |
| rc = -ENOMEM; |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * rio_release_inb_dbell - release inbound doorbell message service |
| * @mport: RIO master port from which to release the doorbell resource |
| * @start: Doorbell info range start |
| * @end: Doorbell info range end |
| * |
| * Releases ownership of an inbound doorbell resource and removes |
| * callback from the doorbell event list. Returns 0 if the request |
| * has been satisfied. |
| */ |
| int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end) |
| { |
| int rc = 0, found = 0; |
| struct rio_dbell *dbell; |
| |
| list_for_each_entry(dbell, &mport->dbells, node) { |
| if ((dbell->res->start == start) && (dbell->res->end == end)) { |
| found = 1; |
| break; |
| } |
| } |
| |
| /* If we can't find an exact match, fail */ |
| if (!found) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| /* Delete from list */ |
| list_del(&dbell->node); |
| |
| /* Release the doorbell resource */ |
| rc = release_resource(dbell->res); |
| |
| /* Free the doorbell event */ |
| kfree(dbell); |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * rio_request_outb_dbell - request outbound doorbell message range |
| * @rdev: RIO device from which to allocate the doorbell resource |
| * @start: Doorbell message range start |
| * @end: Doorbell message range end |
| * |
| * Requests ownership of a doorbell message range. Returns a resource |
| * if the request has been satisfied or %NULL on failure. |
| */ |
| struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start, |
| u16 end) |
| { |
| struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); |
| |
| if (res) { |
| rio_init_dbell_res(res, start, end); |
| |
| /* Make sure these doorbells aren't in use */ |
| if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res) |
| < 0) { |
| kfree(res); |
| res = NULL; |
| } |
| } |
| |
| return res; |
| } |
| |
| /** |
| * rio_release_outb_dbell - release outbound doorbell message range |
| * @rdev: RIO device from which to release the doorbell resource |
| * @res: Doorbell resource to be freed |
| * |
| * Releases ownership of a doorbell message range. Returns 0 if the |
| * request has been satisfied. |
| */ |
| int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res) |
| { |
| int rc = release_resource(res); |
| |
| kfree(res); |
| |
| return rc; |
| } |
| |
| /** |
| * rio_mport_get_feature - query for devices' extended features |
| * @port: Master port to issue transaction |
| * @local: Indicate a local master port or remote device access |
| * @destid: Destination ID of the device |
| * @hopcount: Number of switch hops to the device |
| * @ftr: Extended feature code |
| * |
| * Tell if a device supports a given RapidIO capability. |
| * Returns the offset of the requested extended feature |
| * block within the device's RIO configuration space or |
| * 0 in case the device does not support it. Possible |
| * values for @ftr: |
| * |
| * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices |
| * |
| * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices |
| * |
| * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices |
| * |
| * %RIO_EFB_SER_EP_ID LP/Serial EP Devices |
| * |
| * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices |
| * |
| * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices |
| */ |
| u32 |
| rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, |
| u8 hopcount, int ftr) |
| { |
| u32 asm_info, ext_ftr_ptr, ftr_header; |
| |
| if (local) |
| rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info); |
| else |
| rio_mport_read_config_32(port, destid, hopcount, |
| RIO_ASM_INFO_CAR, &asm_info); |
| |
| ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK; |
| |
| while (ext_ftr_ptr) { |
| if (local) |
| rio_local_read_config_32(port, ext_ftr_ptr, |
| &ftr_header); |
| else |
| rio_mport_read_config_32(port, destid, hopcount, |
| ext_ftr_ptr, &ftr_header); |
| if (RIO_GET_BLOCK_ID(ftr_header) == ftr) |
| return ext_ftr_ptr; |
| if (!(ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header))) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did |
| * @vid: RIO vid to match or %RIO_ANY_ID to match all vids |
| * @did: RIO did to match or %RIO_ANY_ID to match all dids |
| * @asm_vid: RIO asm_vid to match or %RIO_ANY_ID to match all asm_vids |
| * @asm_did: RIO asm_did to match or %RIO_ANY_ID to match all asm_dids |
| * @from: Previous RIO device found in search, or %NULL for new search |
| * |
| * Iterates through the list of known RIO devices. If a RIO device is |
| * found with a matching @vid, @did, @asm_vid, @asm_did, the reference |
| * count to the device is incrememted and a pointer to its device |
| * structure is returned. Otherwise, %NULL is returned. A new search |
| * is initiated by passing %NULL to the @from argument. Otherwise, if |
| * @from is not %NULL, searches continue from next device on the global |
| * list. The reference count for @from is always decremented if it is |
| * not %NULL. |
| */ |
| struct rio_dev *rio_get_asm(u16 vid, u16 did, |
| u16 asm_vid, u16 asm_did, struct rio_dev *from) |
| { |
| struct list_head *n; |
| struct rio_dev *rdev; |
| |
| WARN_ON(in_interrupt()); |
| spin_lock(&rio_global_list_lock); |
| n = from ? from->global_list.next : rio_devices.next; |
| |
| while (n && (n != &rio_devices)) { |
| rdev = rio_dev_g(n); |
| if ((vid == RIO_ANY_ID || rdev->vid == vid) && |
| (did == RIO_ANY_ID || rdev->did == did) && |
| (asm_vid == RIO_ANY_ID || rdev->asm_vid == asm_vid) && |
| (asm_did == RIO_ANY_ID || rdev->asm_did == asm_did)) |
| goto exit; |
| n = n->next; |
| } |
| rdev = NULL; |
| exit: |
| rio_dev_put(from); |
| rdev = rio_dev_get(rdev); |
| spin_unlock(&rio_global_list_lock); |
| return rdev; |
| } |
| |
| /** |
| * rio_get_device - Begin or continue searching for a RIO device by vid/did |
| * @vid: RIO vid to match or %RIO_ANY_ID to match all vids |
| * @did: RIO did to match or %RIO_ANY_ID to match all dids |
| * @from: Previous RIO device found in search, or %NULL for new search |
| * |
| * Iterates through the list of known RIO devices. If a RIO device is |
| * found with a matching @vid and @did, the reference count to the |
| * device is incrememted and a pointer to its device structure is returned. |
| * Otherwise, %NULL is returned. A new search is initiated by passing %NULL |
| * to the @from argument. Otherwise, if @from is not %NULL, searches |
| * continue from next device on the global list. The reference count for |
| * @from is always decremented if it is not %NULL. |
| */ |
| struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from) |
| { |
| return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from); |
| } |
| |
| static void rio_fixup_device(struct rio_dev *dev) |
| { |
| } |
| |
| static int __devinit rio_init(void) |
| { |
| struct rio_dev *dev = NULL; |
| |
| while ((dev = rio_get_device(RIO_ANY_ID, RIO_ANY_ID, dev)) != NULL) { |
| rio_fixup_device(dev); |
| } |
| return 0; |
| } |
| |
| device_initcall(rio_init); |
| |
| int rio_init_mports(void) |
| { |
| int rc = 0; |
| struct rio_mport *port; |
| |
| list_for_each_entry(port, &rio_mports, node) { |
| if (!request_mem_region(port->iores.start, |
| port->iores.end - port->iores.start, |
| port->name)) { |
| printk(KERN_ERR |
| "RIO: Error requesting master port region 0x%016llx-0x%016llx\n", |
| (u64)port->iores.start, (u64)port->iores.end - 1); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| if (port->host_deviceid >= 0) |
| rio_enum_mport(port); |
| else |
| rio_disc_mport(port); |
| } |
| |
| out: |
| return rc; |
| } |
| |
| void rio_register_mport(struct rio_mport *port) |
| { |
| list_add_tail(&port->node, &rio_mports); |
| } |
| |
| EXPORT_SYMBOL_GPL(rio_local_get_device_id); |
| EXPORT_SYMBOL_GPL(rio_get_device); |
| EXPORT_SYMBOL_GPL(rio_get_asm); |
| EXPORT_SYMBOL_GPL(rio_request_inb_dbell); |
| EXPORT_SYMBOL_GPL(rio_release_inb_dbell); |
| EXPORT_SYMBOL_GPL(rio_request_outb_dbell); |
| EXPORT_SYMBOL_GPL(rio_release_outb_dbell); |
| EXPORT_SYMBOL_GPL(rio_request_inb_mbox); |
| EXPORT_SYMBOL_GPL(rio_release_inb_mbox); |
| EXPORT_SYMBOL_GPL(rio_request_outb_mbox); |
| EXPORT_SYMBOL_GPL(rio_release_outb_mbox); |