| /* Copyright (c) 2008-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| /* |
| * SMD Packet Driver -- Provides a binary SMD non-muxed packet port |
| * interface. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/cdev.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/device.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/uaccess.h> |
| #include <linux/workqueue.h> |
| #include <linux/platform_device.h> |
| #include <linux/completion.h> |
| #include <linux/msm_smd_pkt.h> |
| #include <linux/poll.h> |
| #include <soc/qcom/smd.h> |
| #include <soc/qcom/smsm.h> |
| #include <soc/qcom/subsystem_restart.h> |
| #include <asm/ioctls.h> |
| #include <linux/pm.h> |
| #include <linux/of.h> |
| #include <linux/ipc_logging.h> |
| |
| #define MODULE_NAME "msm_smdpkt" |
| #define DEVICE_NAME "smdpkt" |
| #define WAKEUPSOURCE_TIMEOUT (2000) /* two seconds */ |
| |
| struct smd_pkt_dev { |
| struct list_head dev_list; |
| char dev_name[SMD_MAX_CH_NAME_LEN]; |
| char ch_name[SMD_MAX_CH_NAME_LEN]; |
| uint32_t edge; |
| |
| struct cdev cdev; |
| struct device *devicep; |
| void *pil; |
| |
| struct smd_channel *ch; |
| struct mutex ch_lock; |
| struct mutex rx_lock; |
| struct mutex tx_lock; |
| wait_queue_head_t ch_read_wait_queue; |
| wait_queue_head_t ch_write_wait_queue; |
| wait_queue_head_t ch_opened_wait_queue; |
| |
| int i; |
| int ref_cnt; |
| |
| int blocking_write; |
| int is_open; |
| int poll_mode; |
| unsigned int ch_size; |
| uint open_modem_wait; |
| |
| int has_reset; |
| int do_reset_notification; |
| struct completion ch_allocated; |
| struct wakeup_source pa_ws; /* Packet Arrival Wakeup Source */ |
| struct work_struct packet_arrival_work; |
| spinlock_t pa_spinlock; |
| int ws_locked; |
| |
| int sigs_updated; |
| }; |
| |
| |
| struct smd_pkt_driver { |
| struct list_head list; |
| int ref_cnt; |
| char pdriver_name[SMD_MAX_CH_NAME_LEN]; |
| struct platform_driver driver; |
| }; |
| |
| static DEFINE_MUTEX(smd_pkt_driver_lock_lha1); |
| static LIST_HEAD(smd_pkt_driver_list); |
| |
| struct class *smd_pkt_classp; |
| static dev_t smd_pkt_number; |
| static struct delayed_work loopback_work; |
| static void check_and_wakeup_reader(struct smd_pkt_dev *smd_pkt_devp); |
| static void check_and_wakeup_writer(struct smd_pkt_dev *smd_pkt_devp); |
| static uint32_t is_modem_smsm_inited(void); |
| |
| static DEFINE_MUTEX(smd_pkt_dev_lock_lha1); |
| static LIST_HEAD(smd_pkt_dev_list); |
| static int num_smd_pkt_ports; |
| |
| #define SMD_PKT_IPC_LOG_PAGE_CNT 2 |
| static void *smd_pkt_ilctxt; |
| |
| static int msm_smd_pkt_debug_mask; |
| module_param_named(debug_mask, msm_smd_pkt_debug_mask, int, 0664); |
| |
| enum { |
| SMD_PKT_STATUS = 1U << 0, |
| SMD_PKT_READ = 1U << 1, |
| SMD_PKT_WRITE = 1U << 2, |
| SMD_PKT_POLL = 1U << 5, |
| }; |
| |
| #define DEBUG |
| |
| #ifdef DEBUG |
| |
| #define SMD_PKT_LOG_STRING(x...) \ |
| do { \ |
| if (smd_pkt_ilctxt) \ |
| ipc_log_string(smd_pkt_ilctxt, "<SMD_PKT>: "x); \ |
| } while (0) |
| |
| #define D_STATUS(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_STATUS) \ |
| pr_info("Status: "x); \ |
| SMD_PKT_LOG_STRING(x); \ |
| } while (0) |
| |
| #define D_READ(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_READ) \ |
| pr_info("Read: "x); \ |
| SMD_PKT_LOG_STRING(x); \ |
| } while (0) |
| |
| #define D_WRITE(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_WRITE) \ |
| pr_info("Write: "x); \ |
| SMD_PKT_LOG_STRING(x); \ |
| } while (0) |
| |
| #define D_POLL(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_POLL) \ |
| pr_info("Poll: "x); \ |
| SMD_PKT_LOG_STRING(x); \ |
| } while (0) |
| |
| #define E_SMD_PKT_SSR(x) \ |
| do { \ |
| if (x->do_reset_notification) \ |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", \ |
| __func__, x->i); \ |
| } while (0) |
| #else |
| #define D_STATUS(x...) do {} while (0) |
| #define D_READ(x...) do {} while (0) |
| #define D_WRITE(x...) do {} while (0) |
| #define D_POLL(x...) do {} while (0) |
| #define E_SMD_PKT_SSR(x) do {} while (0) |
| #endif |
| |
| static ssize_t open_timeout_store(struct device *d, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned long tmp; |
| |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_for_each_entry(smd_pkt_devp, &smd_pkt_dev_list, dev_list) { |
| if (smd_pkt_devp->devicep == d) { |
| if (!kstrtoul(buf, 10, &tmp)) { |
| smd_pkt_devp->open_modem_wait = tmp; |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| return n; |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| pr_err("%s: unable to convert: %s to an int\n", |
| __func__, buf); |
| return -EINVAL; |
| } |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| |
| pr_err("%s: unable to match device to valid smd_pkt port\n", __func__); |
| return -EINVAL; |
| } |
| |
| static ssize_t open_timeout_show(struct device *d, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_for_each_entry(smd_pkt_devp, &smd_pkt_dev_list, dev_list) { |
| if (smd_pkt_devp->devicep == d) { |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| smd_pkt_devp->open_modem_wait); |
| } |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| pr_err("%s: unable to match device to valid smd_pkt port\n", __func__); |
| return -EINVAL; |
| |
| } |
| |
| static DEVICE_ATTR(open_timeout, 0664, open_timeout_show, open_timeout_store); |
| |
| /** |
| * loopback_edge_store() - Set the edge type for loopback device |
| * @d: Linux device structure |
| * @attr: Device attribute structure |
| * @buf: Input string |
| * @n: Length of the input string |
| * |
| * This function is used to set the loopback device edge runtime |
| * by writing to the loopback_edge node. |
| */ |
| static ssize_t loopback_edge_store(struct device *d, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned long tmp; |
| |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_for_each_entry(smd_pkt_devp, &smd_pkt_dev_list, dev_list) { |
| if (smd_pkt_devp->devicep == d) { |
| if (!kstrtoul(buf, 10, &tmp)) { |
| smd_pkt_devp->edge = tmp; |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| return n; |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| pr_err("%s: unable to convert: %s to an int\n", |
| __func__, buf); |
| return -EINVAL; |
| } |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| pr_err("%s: unable to match device to valid smd_pkt port\n", __func__); |
| return -EINVAL; |
| } |
| |
| /** |
| * loopback_edge_show() - Get the edge type for loopback device |
| * @d: Linux device structure |
| * @attr: Device attribute structure |
| * @buf: Output buffer |
| * |
| * This function is used to get the loopback device edge runtime |
| * by reading the loopback_edge node. |
| */ |
| static ssize_t loopback_edge_show(struct device *d, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_for_each_entry(smd_pkt_devp, &smd_pkt_dev_list, dev_list) { |
| if (smd_pkt_devp->devicep == d) { |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| smd_pkt_devp->edge); |
| } |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| pr_err("%s: unable to match device to valid smd_pkt port\n", __func__); |
| return -EINVAL; |
| |
| } |
| |
| static DEVICE_ATTR(loopback_edge, 0664, loopback_edge_show, |
| loopback_edge_store); |
| |
| static int notify_reset(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| smd_pkt_devp->do_reset_notification = 0; |
| |
| return -ENETRESET; |
| } |
| |
| static void clean_and_signal(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| smd_pkt_devp->do_reset_notification = 1; |
| smd_pkt_devp->has_reset = 1; |
| |
| smd_pkt_devp->is_open = 0; |
| |
| wake_up(&smd_pkt_devp->ch_read_wait_queue); |
| wake_up(&smd_pkt_devp->ch_write_wait_queue); |
| wake_up_interruptible(&smd_pkt_devp->ch_opened_wait_queue); |
| D_STATUS("%s smd_pkt_dev id:%d\n", __func__, smd_pkt_devp->i); |
| } |
| |
| static void loopback_probe_worker(struct work_struct *work) |
| { |
| |
| /* Wait for the modem SMSM to be inited for the SMD |
| ** Loopback channel to be allocated at the modem. Since |
| ** the wait need to be done atmost once, using msleep |
| ** doesn't degrade the performance. |
| */ |
| if (!is_modem_smsm_inited()) |
| schedule_delayed_work(&loopback_work, msecs_to_jiffies(1000)); |
| else |
| smsm_change_state(SMSM_APPS_STATE, |
| 0, SMSM_SMD_LOOPBACK); |
| |
| } |
| |
| static void packet_arrival_worker(struct work_struct *work) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned long flags; |
| |
| smd_pkt_devp = container_of(work, struct smd_pkt_dev, |
| packet_arrival_work); |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| if (smd_pkt_devp->ch && smd_pkt_devp->ws_locked) { |
| D_READ("%s locking smd_pkt_dev id:%d wakeup source\n", |
| __func__, smd_pkt_devp->i); |
| /* |
| * Keep system awake long enough to allow userspace client |
| * to process the packet. |
| */ |
| __pm_wakeup_event(&smd_pkt_devp->pa_ws, WAKEUPSOURCE_TIMEOUT); |
| } |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| } |
| |
| static long smd_pkt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret; |
| struct smd_pkt_dev *smd_pkt_devp; |
| uint32_t val; |
| |
| smd_pkt_devp = file->private_data; |
| if (!smd_pkt_devp) |
| return -EINVAL; |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| switch (cmd) { |
| case TIOCMGET: |
| smd_pkt_devp->sigs_updated = false; |
| ret = smd_tiocmget(smd_pkt_devp->ch); |
| D_STATUS("%s TIOCMGET command on smd_pkt_dev id:%d [%d]\n", |
| __func__, smd_pkt_devp->i, ret); |
| if (ret > 0) |
| ret = put_user((uint32_t)ret, (uint32_t __user *)arg); |
| break; |
| case TIOCMSET: |
| ret = get_user(val, (uint32_t *)arg); |
| if (ret) { |
| pr_err("Error getting TIOCMSET value\n"); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| return ret; |
| } |
| D_STATUS("%s TIOCSET command on smd_pkt_dev id:%d arg[0x%x]\n", |
| __func__, smd_pkt_devp->i, val); |
| ret = smd_tiocmset(smd_pkt_devp->ch, val, ~val); |
| break; |
| case SMD_PKT_IOCTL_BLOCKING_WRITE: |
| ret = get_user(smd_pkt_devp->blocking_write, (int *)arg); |
| break; |
| default: |
| pr_err_ratelimited("%s: Unrecognized ioctl command %d\n", |
| __func__, cmd); |
| ret = -ENOIOCTLCMD; |
| } |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| return ret; |
| } |
| |
| ssize_t smd_pkt_read(struct file *file, |
| char __user *_buf, |
| size_t count, |
| loff_t *ppos) |
| { |
| int r; |
| int bytes_read; |
| int pkt_size; |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned long flags; |
| void *buf; |
| |
| smd_pkt_devp = file->private_data; |
| |
| if (!smd_pkt_devp) { |
| pr_err_ratelimited("%s on NULL smd_pkt_dev\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err_ratelimited("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return -EINVAL; |
| } |
| |
| if (smd_pkt_devp->do_reset_notification) { |
| /* notify client that a reset occurred */ |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| return notify_reset(smd_pkt_devp); |
| } |
| D_READ("Begin %s on smd_pkt_dev id:%d buffer_size %zu\n", |
| __func__, smd_pkt_devp->i, count); |
| |
| buf = kmalloc(count, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| wait_for_packet: |
| r = wait_event_interruptible(smd_pkt_devp->ch_read_wait_queue, |
| !smd_pkt_devp->ch || |
| (smd_cur_packet_size(smd_pkt_devp->ch) > 0 |
| && smd_read_avail(smd_pkt_devp->ch)) || |
| smd_pkt_devp->has_reset); |
| |
| mutex_lock(&smd_pkt_devp->rx_lock); |
| if (smd_pkt_devp->has_reset) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| kfree(buf); |
| return notify_reset(smd_pkt_devp); |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| pr_err_ratelimited("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| kfree(buf); |
| return -EINVAL; |
| } |
| |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| /* qualify error message */ |
| if (r != -ERESTARTSYS) { |
| /* we get this anytime a signal comes in */ |
| pr_err_ratelimited("%s: wait_event_interruptible on smd_pkt_dev id:%d ret %i\n", |
| __func__, smd_pkt_devp->i, r); |
| } |
| kfree(buf); |
| return r; |
| } |
| |
| /* Here we have a whole packet waiting for us */ |
| pkt_size = smd_cur_packet_size(smd_pkt_devp->ch); |
| |
| if (!pkt_size) { |
| pr_err_ratelimited("%s: No data on smd_pkt_dev id:%d, False wakeup\n", |
| __func__, smd_pkt_devp->i); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| goto wait_for_packet; |
| } |
| |
| if (pkt_size < 0) { |
| pr_err_ratelimited("%s: Error %d obtaining packet size for Channel %s", |
| __func__, pkt_size, smd_pkt_devp->ch_name); |
| kfree(buf); |
| return pkt_size; |
| } |
| |
| if ((uint32_t)pkt_size > count) { |
| pr_err_ratelimited("%s: failure on smd_pkt_dev id: %d - packet size %d > buffer size %zu,", |
| __func__, smd_pkt_devp->i, |
| pkt_size, count); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| kfree(buf); |
| return -ETOOSMALL; |
| } |
| |
| bytes_read = 0; |
| do { |
| r = smd_read(smd_pkt_devp->ch, |
| (buf + bytes_read), |
| (pkt_size - bytes_read)); |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| if (smd_pkt_devp->has_reset) { |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| return notify_reset(smd_pkt_devp); |
| } |
| pr_err_ratelimited("%s Error while reading %d\n", |
| __func__, r); |
| kfree(buf); |
| return r; |
| } |
| bytes_read += r; |
| if (pkt_size != bytes_read) |
| wait_event(smd_pkt_devp->ch_read_wait_queue, |
| smd_read_avail(smd_pkt_devp->ch) || |
| smd_pkt_devp->has_reset); |
| if (smd_pkt_devp->has_reset) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| kfree(buf); |
| return notify_reset(smd_pkt_devp); |
| } |
| } while (pkt_size != bytes_read); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| if (smd_pkt_devp->poll_mode && |
| !smd_cur_packet_size(smd_pkt_devp->ch)) { |
| __pm_relax(&smd_pkt_devp->pa_ws); |
| smd_pkt_devp->ws_locked = 0; |
| smd_pkt_devp->poll_mode = 0; |
| D_READ("%s unlocked smd_pkt_dev id:%d wakeup_source\n", |
| __func__, smd_pkt_devp->i); |
| } |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| r = copy_to_user(_buf, buf, bytes_read); |
| if (r) { |
| kfree(buf); |
| return -EFAULT; |
| } |
| D_READ("Finished %s on smd_pkt_dev id:%d %d bytes\n", |
| __func__, smd_pkt_devp->i, bytes_read); |
| kfree(buf); |
| |
| /* check and wakeup read threads waiting on this device */ |
| check_and_wakeup_reader(smd_pkt_devp); |
| |
| return bytes_read; |
| } |
| |
| ssize_t smd_pkt_write(struct file *file, |
| const char __user *_buf, |
| size_t count, |
| loff_t *ppos) |
| { |
| int r = 0, bytes_written; |
| struct smd_pkt_dev *smd_pkt_devp; |
| DEFINE_WAIT(write_wait); |
| void *buf; |
| |
| smd_pkt_devp = file->private_data; |
| |
| if (!smd_pkt_devp) { |
| pr_err_ratelimited("%s on NULL smd_pkt_dev\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err_ratelimited("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return -EINVAL; |
| } |
| |
| if (smd_pkt_devp->do_reset_notification || smd_pkt_devp->has_reset) { |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| /* notify client that a reset occurred */ |
| return notify_reset(smd_pkt_devp); |
| } |
| D_WRITE("Begin %s on smd_pkt_dev id:%d data_size %zu\n", |
| __func__, smd_pkt_devp->i, count); |
| |
| buf = kmalloc(count, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| r = copy_from_user(buf, _buf, count); |
| if (r) { |
| kfree(buf); |
| return -EFAULT; |
| } |
| |
| mutex_lock(&smd_pkt_devp->tx_lock); |
| if (!smd_pkt_devp->blocking_write) { |
| if (smd_write_avail(smd_pkt_devp->ch) < count) { |
| pr_err_ratelimited("%s: Not enough space in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| kfree(buf); |
| return -ENOMEM; |
| } |
| } |
| |
| r = smd_write_start(smd_pkt_devp->ch, count); |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| pr_err_ratelimited("%s: Error:%d in smd_pkt_dev id:%d @ smd_write_start\n", |
| __func__, r, smd_pkt_devp->i); |
| kfree(buf); |
| return r; |
| } |
| |
| bytes_written = 0; |
| do { |
| prepare_to_wait(&smd_pkt_devp->ch_write_wait_queue, |
| &write_wait, TASK_UNINTERRUPTIBLE); |
| if (!smd_write_segment_avail(smd_pkt_devp->ch) && |
| !smd_pkt_devp->has_reset) { |
| smd_enable_read_intr(smd_pkt_devp->ch); |
| schedule(); |
| } |
| finish_wait(&smd_pkt_devp->ch_write_wait_queue, &write_wait); |
| smd_disable_read_intr(smd_pkt_devp->ch); |
| |
| if (smd_pkt_devp->has_reset) { |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| kfree(buf); |
| return notify_reset(smd_pkt_devp); |
| } |
| r = smd_write_segment(smd_pkt_devp->ch, |
| (void *)(buf + bytes_written), |
| (count - bytes_written)); |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| if (smd_pkt_devp->has_reset) { |
| E_SMD_PKT_SSR(smd_pkt_devp); |
| return notify_reset(smd_pkt_devp); |
| } |
| pr_err_ratelimited("%s on smd_pkt_dev id:%d failed r:%d\n", |
| __func__, smd_pkt_devp->i, r); |
| kfree(buf); |
| return r; |
| } |
| bytes_written += r; |
| } while (bytes_written != count); |
| smd_write_end(smd_pkt_devp->ch); |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| D_WRITE("Finished %s on smd_pkt_dev id:%d %zu bytes\n", |
| __func__, smd_pkt_devp->i, count); |
| |
| kfree(buf); |
| return count; |
| } |
| |
| static unsigned int smd_pkt_poll(struct file *file, poll_table *wait) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned int mask = 0; |
| |
| smd_pkt_devp = file->private_data; |
| if (!smd_pkt_devp) { |
| pr_err_ratelimited("%s on a NULL device\n", __func__); |
| return POLLERR; |
| } |
| |
| smd_pkt_devp->poll_mode = 1; |
| poll_wait(file, &smd_pkt_devp->ch_read_wait_queue, wait); |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| if (smd_pkt_devp->has_reset || !smd_pkt_devp->ch) { |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| return POLLERR; |
| } |
| |
| if (smd_read_avail(smd_pkt_devp->ch)) { |
| mask |= POLLIN | POLLRDNORM; |
| D_POLL("%s sets POLLIN for smd_pkt_dev id: %d\n", |
| __func__, smd_pkt_devp->i); |
| } |
| |
| if (smd_pkt_devp->sigs_updated) { |
| mask |= POLLPRI; |
| D_POLL("%s sets POLLPRI for smd_pkt_dev id: %d\n", |
| __func__, smd_pkt_devp->i); |
| } |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| return mask; |
| } |
| |
| static void check_and_wakeup_reader(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| int sz; |
| unsigned long flags; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| |
| sz = smd_cur_packet_size(smd_pkt_devp->ch); |
| if (sz == 0) { |
| D_READ("%s: No packet in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| if (!smd_read_avail(smd_pkt_devp->ch)) { |
| D_READ( |
| "%s: packet size is %d in smd_pkt_dev id:%d - but the data isn't here\n", |
| __func__, sz, smd_pkt_devp->i); |
| return; |
| } |
| |
| /* here we have a packet of size sz ready */ |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| __pm_stay_awake(&smd_pkt_devp->pa_ws); |
| smd_pkt_devp->ws_locked = 1; |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| wake_up(&smd_pkt_devp->ch_read_wait_queue); |
| schedule_work(&smd_pkt_devp->packet_arrival_work); |
| D_READ("%s: wake_up smd_pkt_dev id:%d\n", __func__, smd_pkt_devp->i); |
| } |
| |
| static void check_and_wakeup_writer(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| int sz; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| |
| sz = smd_write_segment_avail(smd_pkt_devp->ch); |
| if (sz) { |
| D_WRITE("%s: %d bytes write space in smd_pkt_dev id:%d\n", |
| __func__, sz, smd_pkt_devp->i); |
| smd_disable_read_intr(smd_pkt_devp->ch); |
| wake_up(&smd_pkt_devp->ch_write_wait_queue); |
| } |
| } |
| |
| static void ch_notify(void *priv, unsigned int event) |
| { |
| struct smd_pkt_dev *smd_pkt_devp = priv; |
| |
| if (smd_pkt_devp->ch == 0) { |
| if (event != SMD_EVENT_CLOSE) |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| |
| switch (event) { |
| case SMD_EVENT_DATA: { |
| D_STATUS("%s: DATA event in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| check_and_wakeup_reader(smd_pkt_devp); |
| if (smd_pkt_devp->blocking_write) |
| check_and_wakeup_writer(smd_pkt_devp); |
| break; |
| } |
| case SMD_EVENT_OPEN: |
| D_STATUS("%s: OPEN event in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| smd_pkt_devp->has_reset = 0; |
| smd_pkt_devp->is_open = 1; |
| wake_up_interruptible(&smd_pkt_devp->ch_opened_wait_queue); |
| break; |
| case SMD_EVENT_CLOSE: |
| D_STATUS("%s: CLOSE event in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| smd_pkt_devp->is_open = 0; |
| /* put port into reset state */ |
| clean_and_signal(smd_pkt_devp); |
| if (!strcmp(smd_pkt_devp->ch_name, "LOOPBACK")) |
| schedule_delayed_work(&loopback_work, |
| msecs_to_jiffies(1000)); |
| break; |
| case SMD_EVENT_STATUS: |
| smd_pkt_devp->sigs_updated = true; |
| break; |
| } |
| } |
| |
| static int smd_pkt_dummy_probe(struct platform_device *pdev) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_for_each_entry(smd_pkt_devp, &smd_pkt_dev_list, dev_list) { |
| if (smd_pkt_devp->edge == pdev->id |
| && !strcmp(pdev->name, smd_pkt_devp->ch_name)) { |
| complete_all(&smd_pkt_devp->ch_allocated); |
| D_STATUS("%s allocated SMD ch for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| break; |
| } |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| return 0; |
| } |
| |
| static uint32_t is_modem_smsm_inited(void) |
| { |
| uint32_t modem_state; |
| uint32_t ready_state = (SMSM_INIT | SMSM_SMDINIT); |
| |
| modem_state = smsm_get_state(SMSM_MODEM_STATE); |
| return (modem_state & ready_state) == ready_state; |
| } |
| |
| /** |
| * smd_pkt_add_driver() - Add platform drivers for smd pkt device |
| * |
| * @smd_pkt_devp: pointer to the smd pkt device structure |
| * |
| * @returns: 0 for success, standard Linux error code otherwise |
| * |
| * This function is used to register platform driver once for all |
| * smd pkt devices which have same names and increment the reference |
| * count for 2nd to nth devices. |
| */ |
| static int smd_pkt_add_driver(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| int r = 0; |
| struct smd_pkt_driver *smd_pkt_driverp; |
| struct smd_pkt_driver *item; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return -EINVAL; |
| } |
| D_STATUS("Begin %s on smd_pkt_ch[%s]\n", __func__, |
| smd_pkt_devp->ch_name); |
| |
| mutex_lock(&smd_pkt_driver_lock_lha1); |
| list_for_each_entry(item, &smd_pkt_driver_list, list) { |
| if (!strcmp(item->pdriver_name, smd_pkt_devp->ch_name)) { |
| D_STATUS("%s:%s Already Platform driver reg. cnt:%d\n", |
| __func__, smd_pkt_devp->ch_name, item->ref_cnt); |
| ++item->ref_cnt; |
| goto exit; |
| } |
| } |
| |
| smd_pkt_driverp = kzalloc(sizeof(*smd_pkt_driverp), GFP_KERNEL); |
| if (IS_ERR_OR_NULL(smd_pkt_driverp)) { |
| pr_err("%s: kzalloc() failed for smd_pkt_driver[%s]\n", |
| __func__, smd_pkt_devp->ch_name); |
| r = -ENOMEM; |
| goto exit; |
| } |
| |
| smd_pkt_driverp->driver.probe = smd_pkt_dummy_probe; |
| scnprintf(smd_pkt_driverp->pdriver_name, SMD_MAX_CH_NAME_LEN, |
| "%s", smd_pkt_devp->ch_name); |
| smd_pkt_driverp->driver.driver.name = smd_pkt_driverp->pdriver_name; |
| smd_pkt_driverp->driver.driver.owner = THIS_MODULE; |
| r = platform_driver_register(&smd_pkt_driverp->driver); |
| if (r) { |
| pr_err("%s: %s Platform driver reg. failed\n", |
| __func__, smd_pkt_devp->ch_name); |
| kfree(smd_pkt_driverp); |
| goto exit; |
| } |
| ++smd_pkt_driverp->ref_cnt; |
| list_add(&smd_pkt_driverp->list, &smd_pkt_driver_list); |
| |
| exit: |
| D_STATUS("End %s on smd_pkt_ch[%s]\n", __func__, smd_pkt_devp->ch_name); |
| mutex_unlock(&smd_pkt_driver_lock_lha1); |
| return r; |
| } |
| |
| /** |
| * smd_pkt_remove_driver() - Remove the platform drivers for smd pkt device |
| * |
| * @smd_pkt_devp: pointer to the smd pkt device structure |
| * |
| * This function is used to decrement the reference count on |
| * platform drivers for smd pkt devices and removes the drivers |
| * when the reference count becomes zero. |
| */ |
| static void smd_pkt_remove_driver(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| struct smd_pkt_driver *smd_pkt_driverp; |
| bool found_item = false; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return; |
| } |
| |
| D_STATUS("Begin %s on smd_pkt_ch[%s]\n", __func__, |
| smd_pkt_devp->ch_name); |
| mutex_lock(&smd_pkt_driver_lock_lha1); |
| list_for_each_entry(smd_pkt_driverp, &smd_pkt_driver_list, list) { |
| if (!strcmp(smd_pkt_driverp->pdriver_name, |
| smd_pkt_devp->ch_name)) { |
| found_item = true; |
| D_STATUS("%s:%s Platform driver cnt:%d\n", |
| __func__, smd_pkt_devp->ch_name, |
| smd_pkt_driverp->ref_cnt); |
| if (smd_pkt_driverp->ref_cnt > 0) |
| --smd_pkt_driverp->ref_cnt; |
| else |
| pr_warn("%s reference count <= 0\n", __func__); |
| break; |
| } |
| } |
| if (!found_item) |
| pr_err("%s:%s No item found in list.\n", |
| __func__, smd_pkt_devp->ch_name); |
| |
| if (found_item && smd_pkt_driverp->ref_cnt == 0) { |
| platform_driver_unregister(&smd_pkt_driverp->driver); |
| smd_pkt_driverp->driver.probe = NULL; |
| list_del(&smd_pkt_driverp->list); |
| kfree(smd_pkt_driverp); |
| } |
| mutex_unlock(&smd_pkt_driver_lock_lha1); |
| D_STATUS("End %s on smd_pkt_ch[%s]\n", __func__, smd_pkt_devp->ch_name); |
| } |
| |
| int smd_pkt_open(struct inode *inode, struct file *file) |
| { |
| int r = 0; |
| struct smd_pkt_dev *smd_pkt_devp; |
| const char *peripheral = NULL; |
| |
| smd_pkt_devp = container_of(inode->i_cdev, struct smd_pkt_dev, cdev); |
| |
| if (!smd_pkt_devp) { |
| pr_err_ratelimited("%s on a NULL device\n", __func__); |
| return -EINVAL; |
| } |
| D_STATUS("Begin %s on smd_pkt_dev id:%d\n", __func__, smd_pkt_devp->i); |
| |
| file->private_data = smd_pkt_devp; |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| if (smd_pkt_devp->ch == 0) { |
| unsigned int open_wait_rem; |
| |
| open_wait_rem = smd_pkt_devp->open_modem_wait * 1000; |
| reinit_completion(&smd_pkt_devp->ch_allocated); |
| |
| r = smd_pkt_add_driver(smd_pkt_devp); |
| if (r) { |
| pr_err_ratelimited("%s: %s Platform driver reg. failed\n", |
| __func__, smd_pkt_devp->ch_name); |
| goto out; |
| } |
| |
| peripheral = smd_edge_to_pil_str(smd_pkt_devp->edge); |
| if (!IS_ERR_OR_NULL(peripheral)) { |
| smd_pkt_devp->pil = subsystem_get(peripheral); |
| if (IS_ERR(smd_pkt_devp->pil)) { |
| r = PTR_ERR(smd_pkt_devp->pil); |
| pr_err_ratelimited("%s failed on smd_pkt_dev id:%d - subsystem_get failed for %s\n", |
| __func__, smd_pkt_devp->i, peripheral); |
| /* |
| * Sleep inorder to reduce the frequency of |
| * retry by user-space modules and to avoid |
| * possible watchdog bite. |
| */ |
| msleep(open_wait_rem); |
| goto release_pd; |
| } |
| } |
| |
| /* Wait for the modem SMSM to be inited for the SMD |
| ** Loopback channel to be allocated at the modem. Since |
| ** the wait need to be done atmost once, using msleep |
| ** doesn't degrade the performance. |
| */ |
| if (!strcmp(smd_pkt_devp->ch_name, "LOOPBACK")) { |
| if (!is_modem_smsm_inited()) |
| msleep(5000); |
| smsm_change_state(SMSM_APPS_STATE, |
| 0, SMSM_SMD_LOOPBACK); |
| msleep(100); |
| } |
| |
| /* |
| * Wait for a packet channel to be allocated so we know |
| * the modem is ready enough. |
| */ |
| if (open_wait_rem) { |
| r = wait_for_completion_interruptible_timeout( |
| &smd_pkt_devp->ch_allocated, |
| msecs_to_jiffies(open_wait_rem)); |
| if (r >= 0) |
| open_wait_rem = jiffies_to_msecs(r); |
| if (r == 0) |
| r = -ETIMEDOUT; |
| if (r == -ERESTARTSYS) { |
| pr_info_ratelimited("%s: wait on smd_pkt_dev id:%d allocation interrupted\n", |
| __func__, smd_pkt_devp->i); |
| goto release_pil; |
| } |
| if (r < 0) { |
| pr_err_ratelimited("%s: wait on smd_pkt_dev id:%d allocation failed rc:%d\n", |
| __func__, smd_pkt_devp->i, r); |
| goto release_pil; |
| } |
| } |
| |
| r = smd_named_open_on_edge(smd_pkt_devp->ch_name, |
| smd_pkt_devp->edge, |
| &smd_pkt_devp->ch, |
| smd_pkt_devp, |
| ch_notify); |
| if (r < 0) { |
| pr_err_ratelimited("%s: %s open failed %d\n", __func__, |
| smd_pkt_devp->ch_name, r); |
| goto release_pil; |
| } |
| |
| open_wait_rem = max_t(unsigned int, 2000, open_wait_rem); |
| r = wait_event_interruptible_timeout( |
| smd_pkt_devp->ch_opened_wait_queue, |
| smd_pkt_devp->is_open, |
| msecs_to_jiffies(open_wait_rem)); |
| if (r == 0) |
| r = -ETIMEDOUT; |
| |
| if (r < 0) { |
| /* close the ch to sync smd's state with smd_pkt */ |
| smd_close(smd_pkt_devp->ch); |
| smd_pkt_devp->ch = NULL; |
| } |
| |
| if (r == -ERESTARTSYS) { |
| pr_info_ratelimited("%s: wait on smd_pkt_dev id:%d OPEN interrupted\n", |
| __func__, smd_pkt_devp->i); |
| } else if (r < 0) { |
| pr_err_ratelimited("%s: wait on smd_pkt_dev id:%d OPEN event failed rc:%d\n", |
| __func__, smd_pkt_devp->i, r); |
| } else if (!smd_pkt_devp->is_open) { |
| pr_err_ratelimited("%s: Invalid OPEN event on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| r = -ENODEV; |
| } else { |
| smd_disable_read_intr(smd_pkt_devp->ch); |
| smd_pkt_devp->ch_size = |
| smd_write_avail(smd_pkt_devp->ch); |
| r = 0; |
| smd_pkt_devp->ref_cnt++; |
| D_STATUS("Finished %s on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| } |
| } else { |
| smd_pkt_devp->ref_cnt++; |
| } |
| release_pil: |
| if (peripheral && (r < 0)) { |
| subsystem_put(smd_pkt_devp->pil); |
| smd_pkt_devp->pil = NULL; |
| } |
| |
| release_pd: |
| if (r < 0) |
| smd_pkt_remove_driver(smd_pkt_devp); |
| out: |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| |
| return r; |
| } |
| |
| int smd_pkt_release(struct inode *inode, struct file *file) |
| { |
| int r = 0; |
| struct smd_pkt_dev *smd_pkt_devp = file->private_data; |
| unsigned long flags; |
| |
| if (!smd_pkt_devp) { |
| pr_err_ratelimited("%s on a NULL device\n", __func__); |
| return -EINVAL; |
| } |
| D_STATUS("Begin %s on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| mutex_lock(&smd_pkt_devp->rx_lock); |
| mutex_lock(&smd_pkt_devp->tx_lock); |
| if (smd_pkt_devp->ref_cnt > 0) |
| smd_pkt_devp->ref_cnt--; |
| |
| if (smd_pkt_devp->ch != 0 && smd_pkt_devp->ref_cnt == 0) { |
| clean_and_signal(smd_pkt_devp); |
| r = smd_close(smd_pkt_devp->ch); |
| smd_pkt_devp->ch = 0; |
| smd_pkt_devp->blocking_write = 0; |
| smd_pkt_devp->poll_mode = 0; |
| smd_pkt_remove_driver(smd_pkt_devp); |
| if (smd_pkt_devp->pil) |
| subsystem_put(smd_pkt_devp->pil); |
| smd_pkt_devp->has_reset = 0; |
| smd_pkt_devp->do_reset_notification = 0; |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| if (smd_pkt_devp->ws_locked) { |
| __pm_relax(&smd_pkt_devp->pa_ws); |
| smd_pkt_devp->ws_locked = 0; |
| } |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| smd_pkt_devp->sigs_updated = false; |
| } |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| if (flush_work(&smd_pkt_devp->packet_arrival_work)) |
| D_STATUS("%s: Flushed work for smd_pkt_dev id:%d\n", __func__, |
| smd_pkt_devp->i); |
| |
| D_STATUS("Finished %s on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| |
| return r; |
| } |
| |
| static const struct file_operations smd_pkt_fops = { |
| .owner = THIS_MODULE, |
| .open = smd_pkt_open, |
| .release = smd_pkt_release, |
| .read = smd_pkt_read, |
| .write = smd_pkt_write, |
| .poll = smd_pkt_poll, |
| .unlocked_ioctl = smd_pkt_ioctl, |
| .compat_ioctl = smd_pkt_ioctl, |
| }; |
| |
| static int smd_pkt_init_add_device(struct smd_pkt_dev *smd_pkt_devp, int i) |
| { |
| int r = 0; |
| |
| smd_pkt_devp->i = i; |
| |
| init_waitqueue_head(&smd_pkt_devp->ch_read_wait_queue); |
| init_waitqueue_head(&smd_pkt_devp->ch_write_wait_queue); |
| smd_pkt_devp->is_open = 0; |
| smd_pkt_devp->poll_mode = 0; |
| smd_pkt_devp->ws_locked = 0; |
| init_waitqueue_head(&smd_pkt_devp->ch_opened_wait_queue); |
| |
| spin_lock_init(&smd_pkt_devp->pa_spinlock); |
| mutex_init(&smd_pkt_devp->ch_lock); |
| mutex_init(&smd_pkt_devp->rx_lock); |
| mutex_init(&smd_pkt_devp->tx_lock); |
| wakeup_source_init(&smd_pkt_devp->pa_ws, smd_pkt_devp->dev_name); |
| INIT_WORK(&smd_pkt_devp->packet_arrival_work, packet_arrival_worker); |
| init_completion(&smd_pkt_devp->ch_allocated); |
| |
| cdev_init(&smd_pkt_devp->cdev, &smd_pkt_fops); |
| smd_pkt_devp->cdev.owner = THIS_MODULE; |
| |
| r = cdev_add(&smd_pkt_devp->cdev, (smd_pkt_number + i), 1); |
| if (r) { |
| pr_err("%s: cdev_add() failed for smd_pkt_dev id:%d ret:%i\n", |
| __func__, i, r); |
| return r; |
| } |
| |
| smd_pkt_devp->devicep = |
| device_create(smd_pkt_classp, |
| NULL, |
| (smd_pkt_number + i), |
| NULL, |
| smd_pkt_devp->dev_name); |
| |
| if (IS_ERR_OR_NULL(smd_pkt_devp->devicep)) { |
| pr_err("%s: device_create() failed for smd_pkt_dev id:%d\n", |
| __func__, i); |
| r = -ENOMEM; |
| cdev_del(&smd_pkt_devp->cdev); |
| wakeup_source_trash(&smd_pkt_devp->pa_ws); |
| return r; |
| } |
| if (device_create_file(smd_pkt_devp->devicep, |
| &dev_attr_open_timeout)) |
| pr_err("%s: unable to create device attr for smd_pkt_dev id:%d\n", |
| __func__, i); |
| |
| if (!strcmp(smd_pkt_devp->ch_name, "LOOPBACK")) { |
| if (device_create_file(smd_pkt_devp->devicep, |
| &dev_attr_loopback_edge)) |
| pr_err("%s: unable to create device attr for smd_pkt_dev id:%d\n", |
| __func__, i); |
| } |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_add(&smd_pkt_devp->dev_list, &smd_pkt_dev_list); |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| |
| return r; |
| } |
| |
| static void smd_pkt_core_deinit(void) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| struct smd_pkt_dev *index; |
| |
| mutex_lock(&smd_pkt_dev_lock_lha1); |
| list_for_each_entry_safe(smd_pkt_devp, index, &smd_pkt_dev_list, |
| dev_list) { |
| cdev_del(&smd_pkt_devp->cdev); |
| list_del(&smd_pkt_devp->dev_list); |
| device_destroy(smd_pkt_classp, |
| MKDEV(MAJOR(smd_pkt_number), smd_pkt_devp->i)); |
| kfree(smd_pkt_devp); |
| } |
| mutex_unlock(&smd_pkt_dev_lock_lha1); |
| |
| if (!IS_ERR_OR_NULL(smd_pkt_classp)) |
| class_destroy(smd_pkt_classp); |
| |
| unregister_chrdev_region(MAJOR(smd_pkt_number), num_smd_pkt_ports); |
| } |
| |
| static int smd_pkt_alloc_chrdev_region(void) |
| { |
| int r = alloc_chrdev_region(&smd_pkt_number, |
| 0, |
| num_smd_pkt_ports, |
| DEVICE_NAME); |
| |
| if (r) { |
| pr_err("%s: alloc_chrdev_region() failed ret:%i\n", |
| __func__, r); |
| return r; |
| } |
| |
| smd_pkt_classp = class_create(THIS_MODULE, DEVICE_NAME); |
| if (IS_ERR(smd_pkt_classp)) { |
| pr_err("%s: class_create() failed ENOMEM\n", __func__); |
| r = -ENOMEM; |
| unregister_chrdev_region(MAJOR(smd_pkt_number), |
| num_smd_pkt_ports); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int parse_smdpkt_devicetree(struct device_node *node, |
| struct smd_pkt_dev *smd_pkt_devp) |
| { |
| int edge; |
| char *key; |
| const char *ch_name; |
| const char *dev_name; |
| const char *remote_ss; |
| |
| key = "qcom,smdpkt-remote"; |
| remote_ss = of_get_property(node, key, NULL); |
| if (!remote_ss) |
| goto error; |
| |
| edge = smd_remote_ss_to_edge(remote_ss); |
| if (edge < 0) |
| goto error; |
| |
| smd_pkt_devp->edge = edge; |
| D_STATUS("%s: %s = %d", __func__, key, edge); |
| |
| key = "qcom,smdpkt-port-name"; |
| ch_name = of_get_property(node, key, NULL); |
| if (!ch_name) |
| goto error; |
| |
| strlcpy(smd_pkt_devp->ch_name, ch_name, SMD_MAX_CH_NAME_LEN); |
| D_STATUS("%s ch_name = %s\n", __func__, ch_name); |
| |
| key = "qcom,smdpkt-dev-name"; |
| dev_name = of_get_property(node, key, NULL); |
| if (!dev_name) |
| goto error; |
| |
| strlcpy(smd_pkt_devp->dev_name, dev_name, SMD_MAX_CH_NAME_LEN); |
| D_STATUS("%s dev_name = %s\n", __func__, dev_name); |
| |
| return 0; |
| |
| error: |
| pr_err("%s: missing key: %s\n", __func__, key); |
| return -ENODEV; |
| |
| } |
| |
| static int smd_pkt_devicetree_init(struct platform_device *pdev) |
| { |
| int ret; |
| int i = 0; |
| struct device_node *node; |
| struct smd_pkt_dev *smd_pkt_devp; |
| int subnode_num = 0; |
| |
| for_each_child_of_node(pdev->dev.of_node, node) |
| ++subnode_num; |
| |
| num_smd_pkt_ports = subnode_num; |
| |
| ret = smd_pkt_alloc_chrdev_region(); |
| if (ret) { |
| pr_err("%s: smd_pkt_alloc_chrdev_region() failed ret:%i\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| for_each_child_of_node(pdev->dev.of_node, node) { |
| smd_pkt_devp = kzalloc(sizeof(struct smd_pkt_dev), GFP_KERNEL); |
| if (IS_ERR_OR_NULL(smd_pkt_devp)) { |
| pr_err("%s: kzalloc() failed for smd_pkt_dev id:%d\n", |
| __func__, i); |
| ret = -ENOMEM; |
| goto error_destroy; |
| } |
| |
| ret = parse_smdpkt_devicetree(node, smd_pkt_devp); |
| if (ret) { |
| pr_err(" failed to parse_smdpkt_devicetree %d\n", i); |
| kfree(smd_pkt_devp); |
| goto error_destroy; |
| } |
| |
| ret = smd_pkt_init_add_device(smd_pkt_devp, i); |
| if (ret < 0) { |
| pr_err("add device failed for idx:%d ret=%d\n", i, ret); |
| kfree(smd_pkt_devp); |
| goto error_destroy; |
| } |
| i++; |
| } |
| |
| INIT_DELAYED_WORK(&loopback_work, loopback_probe_worker); |
| |
| D_STATUS("SMD Packet Port Driver Initialized.\n"); |
| return 0; |
| |
| error_destroy: |
| smd_pkt_core_deinit(); |
| return ret; |
| } |
| |
| static int msm_smd_pkt_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| if (pdev) { |
| if (pdev->dev.of_node) { |
| D_STATUS("%s device tree implementation\n", __func__); |
| ret = smd_pkt_devicetree_init(pdev); |
| if (ret) |
| pr_err("%s: device tree init failed\n", |
| __func__); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id msm_smd_pkt_match_table[] = { |
| { .compatible = "qcom,smdpkt" }, |
| {}, |
| }; |
| |
| static struct platform_driver msm_smd_pkt_driver = { |
| .probe = msm_smd_pkt_probe, |
| .driver = { |
| .name = MODULE_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = msm_smd_pkt_match_table, |
| }, |
| }; |
| |
| static int __init smd_pkt_init(void) |
| { |
| int rc; |
| |
| INIT_LIST_HEAD(&smd_pkt_dev_list); |
| INIT_LIST_HEAD(&smd_pkt_driver_list); |
| rc = platform_driver_register(&msm_smd_pkt_driver); |
| if (rc) { |
| pr_err("%s: msm_smd_driver register failed %d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| smd_pkt_ilctxt = ipc_log_context_create(SMD_PKT_IPC_LOG_PAGE_CNT, |
| "smd_pkt", 0); |
| return 0; |
| } |
| |
| static void __exit smd_pkt_cleanup(void) |
| { |
| smd_pkt_core_deinit(); |
| } |
| |
| module_init(smd_pkt_init); |
| module_exit(smd_pkt_cleanup); |
| |
| MODULE_DESCRIPTION("MSM Shared Memory Packet Port"); |
| MODULE_LICENSE("GPL v2"); |