| /* |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_qos.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/of.h> |
| #include <linux/clk/msm-clock-generic.h> |
| #include <linux/suspend.h> |
| #include <linux/of_platform.h> |
| #include <linux/pm_opp.h> |
| #include <soc/qcom/clock-local2.h> |
| #include <soc/qcom/pm.h> |
| #include <soc/qcom/clock-pll.h> |
| #include <soc/qcom/clock-alpha-pll.h> |
| #include <linux/regulator/rpm-smd-regulator.h> |
| |
| #include <dt-bindings/clock/msm-clocks-8953.h> |
| |
| #include "clock.h" |
| |
| #define APCS_PLL_MODE 0x0 |
| #define APCS_PLL_L_VAL 0x8 |
| #define APCS_PLL_ALPHA_VAL 0x10 |
| #define APCS_PLL_USER_CTL 0x18 |
| #define APCS_PLL_CONFIG_CTL_LO 0x20 |
| #define APCS_PLL_CONFIG_CTL_HI 0x24 |
| #define APCS_PLL_STATUS 0x28 |
| #define APCS_PLL_TEST_CTL_LO 0x30 |
| #define APCS_PLL_TEST_CTL_HI 0x34 |
| |
| #define PLL_MODE(x) (*(x)->base + (unsigned long) (x)->mode_reg) |
| |
| #define GLB_DIAG 0x0b11101c |
| |
| static struct clk_ops clk_ops_variable_rate; |
| |
| DEFINE_EXT_CLK(xo_a_clk, NULL); |
| static DEFINE_VDD_REGS_INIT(vdd_cpu_perf, 1); |
| static DEFINE_VDD_REGS_INIT(vdd_cpu_pwr, 1); |
| static DEFINE_VDD_REGS_INIT(vdd_cci, 1); |
| |
| enum { |
| APCS_C0_PLL_BASE, |
| APCS_C1_PLL_BASE, |
| APCS_CCI_PLL_BASE, |
| N_PLL_BASES, |
| }; |
| |
| enum vdd_mx_pll_levels { |
| VDD_MX_OFF, |
| VDD_MX_MIN, |
| VDD_MX_LOWER, |
| VDD_MX_SVS, |
| VDD_MX_TUR, |
| VDD_MX_NUM, |
| }; |
| |
| static int vdd_pll_levels[] = { |
| RPM_REGULATOR_LEVEL_NONE, /* VDD_PLL_OFF */ |
| RPM_REGULATOR_LEVEL_MIN_SVS, /* VDD_PLL_MIN */ |
| RPM_REGULATOR_LEVEL_LOW_SVS, /* VDD_PLL_LOW_SVS */ |
| RPM_REGULATOR_LEVEL_SVS, /* VDD_PLL_SVS */ |
| RPM_REGULATOR_LEVEL_TURBO, /* VDD_PLL_TUR */ |
| }; |
| |
| static DEFINE_VDD_REGULATORS(vdd_mx, VDD_MX_NUM, 1, |
| vdd_pll_levels, NULL); |
| |
| #define VDD_MX_FMAX_MAP2(l1, f1, l2, f2) \ |
| .vdd_class = &vdd_mx, \ |
| .fmax = (unsigned long[VDD_MX_NUM]) { \ |
| [VDD_MX_##l1] = (f1), \ |
| [VDD_MX_##l2] = (f2), \ |
| }, \ |
| .num_fmax = VDD_MX_NUM |
| |
| #define VDD_MX_FMAX_MAP1(l1, f1) \ |
| .vdd_class = &vdd_mx, \ |
| .fmax = (unsigned long[VDD_MX_NUM]) { \ |
| [VDD_MX_##l1] = (f1), \ |
| }, \ |
| .num_fmax = VDD_MX_NUM |
| |
| static void __iomem *virt_bases[N_PLL_BASES]; |
| |
| /* Power PLL */ |
| static struct pll_clk apcs_c0_pll = { |
| .mode_reg = (void __iomem *)APCS_PLL_MODE, |
| .l_reg = (void __iomem *)APCS_PLL_L_VAL, |
| .alpha_reg = (void __iomem *)APCS_PLL_ALPHA_VAL, |
| .config_reg = (void __iomem *)APCS_PLL_USER_CTL, |
| .config_ctl_reg = (void __iomem *)APCS_PLL_CONFIG_CTL_LO, |
| .config_ctl_hi_reg = (void __iomem *)APCS_PLL_CONFIG_CTL_HI, |
| .test_ctl_lo_reg = (void __iomem *)APCS_PLL_TEST_CTL_LO, |
| .test_ctl_hi_reg = (void __iomem *)APCS_PLL_TEST_CTL_HI, |
| .status_reg = (void __iomem *)APCS_PLL_MODE, |
| .init_test_ctl = true, |
| .test_ctl_dbg = true, |
| .masks = { |
| .main_output_mask = BIT(0), |
| .early_output_mask = BIT(3), |
| .lock_mask = BIT(31), |
| }, |
| .vals = { |
| .config_ctl_val = 0x200D4828, |
| .config_ctl_hi_val = 0x006, |
| .test_ctl_hi_val = 0x00004000, |
| .test_ctl_lo_val = 0x1C000000, |
| }, |
| .max_rate = 2016000000UL, |
| .min_rate = 614400000UL, |
| .src_rate = 19200000UL, |
| .base = &virt_bases[APCS_C0_PLL_BASE], |
| .c = { |
| .parent = &xo_a_clk.c, |
| .dbg_name = "apcs_c0_pll", |
| .ops = &clk_ops_variable_rate, |
| VDD_MX_FMAX_MAP2(MIN, 1200000000UL, LOWER, 2016000000UL), |
| CLK_INIT(apcs_c0_pll.c), |
| }, |
| }; |
| |
| /* Perf PLL */ |
| static struct pll_clk apcs_c1_pll = { |
| .mode_reg = (void __iomem *)APCS_PLL_MODE, |
| .l_reg = (void __iomem *)APCS_PLL_L_VAL, |
| .alpha_reg = (void __iomem *)APCS_PLL_ALPHA_VAL, |
| .config_reg = (void __iomem *)APCS_PLL_USER_CTL, |
| .config_ctl_reg = (void __iomem *)APCS_PLL_CONFIG_CTL_LO, |
| .config_ctl_hi_reg = (void __iomem *)APCS_PLL_CONFIG_CTL_HI, |
| .test_ctl_lo_reg = (void __iomem *)APCS_PLL_TEST_CTL_LO, |
| .test_ctl_hi_reg = (void __iomem *)APCS_PLL_TEST_CTL_HI, |
| .status_reg = (void __iomem *)APCS_PLL_MODE, |
| .init_test_ctl = true, |
| .test_ctl_dbg = true, |
| .masks = { |
| .main_output_mask = BIT(0), |
| .early_output_mask = BIT(3), |
| .lock_mask = BIT(31), |
| }, |
| .vals = { |
| .config_ctl_val = 0x200D4828, |
| .config_ctl_hi_val = 0x006, |
| .test_ctl_hi_val = 0x00004000, |
| .test_ctl_lo_val = 0x1C000000, |
| }, |
| .max_rate = 2016000000UL, |
| .min_rate = 633600000UL, |
| .src_rate = 19200000UL, |
| .base = &virt_bases[APCS_C1_PLL_BASE], |
| .c = { |
| .parent = &xo_a_clk.c, |
| .dbg_name = "apcs_c1_pll", |
| .ops = &clk_ops_variable_rate, |
| VDD_MX_FMAX_MAP2(MIN, 1200000000UL, LOWER, 2016000000UL), |
| CLK_INIT(apcs_c1_pll.c), |
| }, |
| }; |
| |
| static struct alpha_pll_masks pll_masks_p = { |
| .lock_mask = BIT(31), |
| .update_mask = BIT(22), |
| .output_mask = 0xf, |
| .vco_mask = BM(21, 20) >> 20, |
| .vco_shift = 20, |
| .alpha_en_mask = BIT(24), |
| .cal_l_val_mask = BM(31, 16), |
| }; |
| |
| static struct alpha_pll_vco_tbl apcs_cci_pll_vco[] = { |
| VCO(2, 500000000, 1000000000), |
| }; |
| |
| static struct alpha_pll_clk apcs_cci_pll = { |
| .masks = &pll_masks_p, |
| .offset = 0x00, |
| .vco_tbl = apcs_cci_pll_vco, |
| .num_vco = ARRAY_SIZE(apcs_cci_pll_vco), |
| .enable_config = 0x8, /* Early output */ |
| .slew = true, |
| .config_ctl_val = 0x4001055b, |
| .cal_l_val = 0x27 << 16, /* Mid of VCO mode - 748.8MHz */ |
| .base = &virt_bases[APCS_CCI_PLL_BASE], |
| .c = { |
| .parent = &xo_a_clk.c, |
| .rate = 787200000, |
| .dbg_name = "apcs_cci_pll", |
| .ops = &clk_ops_dyna_alpha_pll, |
| VDD_MX_FMAX_MAP1(SVS, 1000000000UL), |
| CLK_INIT(apcs_cci_pll.c), |
| }, |
| }; |
| |
| enum { |
| A53SS_MUX_PERF, |
| A53SS_MUX_PWR, |
| A53SS_MUX_CCI, |
| A53SS_MUX_NUM, |
| }; |
| |
| static const char * const pll_names[] = { "c1", "c0", "cci" }; |
| static const char * const mux_names[] = { "c1", "c0", "cci" }; |
| |
| struct a53_cpu_clk { |
| u32 cpu_reg_mask; |
| cpumask_t cpumask; |
| bool hw_low_power_ctrl; |
| struct pm_qos_request req; |
| struct clk c; |
| struct latency_level latency_lvl; |
| s32 cpu_latency_no_l2_pc_us; |
| }; |
| |
| static struct mux_div_clk perf_cpussmux = { |
| .ops = &rcg_mux_div_ops, |
| .data = { |
| .max_div = 32, |
| .min_div = 2, |
| .is_half_divider = true, |
| }, |
| .c = { |
| .dbg_name = "perf_cpussmux", |
| .ops = &clk_ops_mux_div_clk, |
| CLK_INIT(perf_cpussmux.c), |
| }, |
| .div_mask = BM(4, 0), |
| .src_mask = BM(10, 8) >> 8, |
| .src_shift = 8, |
| MUX_SRC_LIST( |
| { &apcs_c1_pll.c, 5}, |
| ), |
| }; |
| |
| static struct mux_div_clk pwr_cpussmux = { |
| .ops = &rcg_mux_div_ops, |
| .data = { |
| .max_div = 32, |
| .min_div = 2, |
| .is_half_divider = true, |
| }, |
| .c = { |
| .dbg_name = "pwr_cpussmux", |
| .ops = &clk_ops_mux_div_clk, |
| CLK_INIT(pwr_cpussmux.c), |
| }, |
| .div_mask = BM(4, 0), |
| .src_mask = BM(10, 8) >> 8, |
| .src_shift = 8, |
| MUX_SRC_LIST( |
| { &apcs_c0_pll.c, 5}, |
| ), |
| }; |
| |
| static struct mux_div_clk cci_cpussmux = { |
| .ops = &rcg_mux_div_ops, |
| .data = { |
| .skip_odd_div = true, |
| .max_div = 32, |
| .min_div = 2, |
| .is_half_divider = true, |
| }, |
| .c = { |
| .dbg_name = "cci_cpussmux", |
| .ops = &clk_ops_mux_div_clk, |
| CLK_INIT(cci_cpussmux.c), |
| }, |
| .div_mask = BM(4, 0), |
| .src_mask = BM(10, 8) >> 8, |
| .src_shift = 8, |
| MUX_SRC_LIST( |
| { &apcs_cci_pll.c, 5}, |
| ), |
| }; |
| |
| static struct a53_cpu_clk pwr_clk; |
| static struct a53_cpu_clk perf_clk; |
| static struct a53_cpu_clk cci_clk; |
| |
| static void do_nothing(void *unused) { } |
| |
| static inline struct a53_cpu_clk *to_a53_cpu_clk(struct clk *c) |
| { |
| return container_of(c, struct a53_cpu_clk, c); |
| } |
| |
| static enum handoff a53_cpu_clk_handoff(struct clk *c) |
| { |
| c->rate = clk_get_rate(c->parent); |
| return HANDOFF_DISABLED_CLK; |
| } |
| |
| static long a53_cpu_clk_round_rate(struct clk *c, unsigned long rate) |
| { |
| return clk_round_rate(c->parent, rate); |
| } |
| |
| static int a53_cpu_clk_set_rate(struct clk *c, unsigned long rate) |
| { |
| int ret = 0; |
| struct a53_cpu_clk *cpuclk = to_a53_cpu_clk(c); |
| bool hw_low_power_ctrl = cpuclk->hw_low_power_ctrl; |
| |
| /* |
| * If hardware control of the clock tree is enabled during power |
| * collapse, setup a PM QOS request to prevent power collapse and |
| * wake up one of the CPUs in this clock domain, to ensure software |
| * control while the clock rate is being switched. |
| */ |
| if (hw_low_power_ctrl) { |
| memset(&cpuclk->req, 0, sizeof(cpuclk->req)); |
| cpumask_copy(&cpuclk->req.cpus_affine, |
| (const struct cpumask *)&cpuclk->cpumask); |
| cpuclk->req.type = PM_QOS_REQ_AFFINE_CORES; |
| pm_qos_add_request(&cpuclk->req, PM_QOS_CPU_DMA_LATENCY, |
| cpuclk->cpu_latency_no_l2_pc_us - 1); |
| smp_call_function_any(&cpuclk->cpumask, do_nothing, |
| NULL, 1); |
| } |
| |
| ret = clk_set_rate(c->parent, rate); |
| |
| /* Remove PM QOS request */ |
| if (hw_low_power_ctrl) |
| pm_qos_remove_request(&cpuclk->req); |
| |
| return ret; |
| } |
| |
| static void __iomem *variable_pll_list_registers(struct clk *c, int n, |
| struct clk_register_data **regs, u32 *size) |
| { |
| struct pll_clk *pll = to_pll_clk(c); |
| static struct clk_register_data data[] = { |
| {"MODE", 0x0}, |
| {"L", 0x8}, |
| {"ALPHA", 0x10}, |
| {"USER_CTL", 0x18}, |
| {"CONFIG_CTL_LO", 0x20}, |
| {"CONFIG_CTL_HI", 0x24}, |
| {"STATUS", 0x28}, |
| }; |
| if (n) |
| return ERR_PTR(-EINVAL); |
| |
| *regs = data; |
| *size = ARRAY_SIZE(data); |
| return PLL_MODE(pll); |
| } |
| |
| static const struct clk_ops clk_ops_cpu = { |
| .set_rate = a53_cpu_clk_set_rate, |
| .round_rate = a53_cpu_clk_round_rate, |
| .handoff = a53_cpu_clk_handoff, |
| }; |
| |
| static struct a53_cpu_clk perf_clk = { |
| .cpu_reg_mask = 0x103, |
| .latency_lvl = { |
| .affinity_level = LPM_AFF_LVL_L2, |
| .reset_level = LPM_RESET_LVL_GDHS, |
| .level_name = "perf", |
| }, |
| .cpu_latency_no_l2_pc_us = 280, |
| .c = { |
| .parent = &perf_cpussmux.c, |
| .ops = &clk_ops_cpu, |
| .vdd_class = &vdd_cpu_perf, |
| .dbg_name = "perf_clk", |
| CLK_INIT(perf_clk.c), |
| }, |
| }; |
| |
| static struct a53_cpu_clk pwr_clk = { |
| .cpu_reg_mask = 0x3, |
| .latency_lvl = { |
| .affinity_level = LPM_AFF_LVL_L2, |
| .reset_level = LPM_RESET_LVL_GDHS, |
| .level_name = "pwr", |
| }, |
| .cpu_latency_no_l2_pc_us = 280, |
| .c = { |
| .parent = &pwr_cpussmux.c, |
| .ops = &clk_ops_cpu, |
| .vdd_class = &vdd_cpu_pwr, |
| .dbg_name = "pwr_clk", |
| CLK_INIT(pwr_clk.c), |
| }, |
| }; |
| |
| static struct a53_cpu_clk cci_clk = { |
| .c = { |
| .parent = &cci_cpussmux.c, |
| .ops = &clk_ops_cpu, |
| .vdd_class = &vdd_cci, |
| .dbg_name = "cci_clk", |
| CLK_INIT(cci_clk.c), |
| }, |
| }; |
| |
| static void __iomem *meas_base; |
| |
| static struct measure_clk apc0_m_clk = { |
| .c = { |
| .ops = &clk_ops_empty, |
| .dbg_name = "apc0_m_clk", |
| CLK_INIT(apc0_m_clk.c), |
| }, |
| }; |
| |
| static struct measure_clk apc1_m_clk = { |
| .c = { |
| .ops = &clk_ops_empty, |
| .dbg_name = "apc1_m_clk", |
| CLK_INIT(apc1_m_clk.c), |
| }, |
| }; |
| |
| static struct measure_clk cci_m_clk = { |
| .c = { |
| .ops = &clk_ops_empty, |
| .dbg_name = "cci_m_clk", |
| CLK_INIT(cci_m_clk.c), |
| }, |
| }; |
| |
| static struct mux_clk cpu_debug_ter_mux = { |
| .ops = &mux_reg_ops, |
| .mask = 0x3, |
| .shift = 8, |
| MUX_SRC_LIST( |
| { &apc0_m_clk.c, 0}, |
| { &apc1_m_clk.c, 1}, |
| { &cci_m_clk.c, 2}, |
| ), |
| .base = &meas_base, |
| .c = { |
| .dbg_name = "cpu_debug_ter_mux", |
| .ops = &clk_ops_gen_mux, |
| CLK_INIT(cpu_debug_ter_mux.c), |
| }, |
| }; |
| |
| static struct mux_clk cpu_debug_sec_mux = { |
| .ops = &mux_reg_ops, |
| .mask = 0x7, |
| .shift = 12, |
| MUX_SRC_LIST( |
| { &cpu_debug_ter_mux.c, 0}, |
| ), |
| MUX_REC_SRC_LIST( |
| &cpu_debug_ter_mux.c, |
| ), |
| .base = &meas_base, |
| .c = { |
| .dbg_name = "cpu_debug_sec_mux", |
| .ops = &clk_ops_gen_mux, |
| CLK_INIT(cpu_debug_sec_mux.c), |
| }, |
| }; |
| |
| static struct mux_clk cpu_debug_pri_mux = { |
| .ops = &mux_reg_ops, |
| .mask = 0x3, |
| .shift = 16, |
| MUX_SRC_LIST( |
| { &cpu_debug_sec_mux.c, 0}, |
| ), |
| MUX_REC_SRC_LIST( |
| &cpu_debug_sec_mux.c, |
| ), |
| .base = &meas_base, |
| .c = { |
| .dbg_name = "cpu_debug_pri_mux", |
| .ops = &clk_ops_gen_mux, |
| CLK_INIT(cpu_debug_pri_mux.c), |
| }, |
| }; |
| |
| static struct clk_lookup a53_cpu_clocks[] = { |
| /* PLLs */ |
| CLK_LIST(apcs_c0_pll), |
| CLK_LIST(apcs_c1_pll), |
| CLK_LIST(apcs_cci_pll), |
| |
| /* Muxes */ |
| CLK_LIST(pwr_cpussmux), |
| CLK_LIST(perf_cpussmux), |
| CLK_LIST(cci_cpussmux), |
| |
| /* CPU clocks */ |
| CLK_LIST(pwr_clk), |
| CLK_LIST(perf_clk), |
| CLK_LIST(cci_clk), |
| |
| /* debug clocks */ |
| CLK_LIST(apc0_m_clk), |
| CLK_LIST(apc1_m_clk), |
| CLK_LIST(cci_m_clk), |
| CLK_LIST(cpu_debug_pri_mux), |
| }; |
| |
| static struct mux_div_clk *a53ssmux[] = { &perf_cpussmux, &pwr_cpussmux, |
| &cci_cpussmux }; |
| |
| static struct a53_cpu_clk *cpuclk[] = { &perf_clk, &pwr_clk, |
| &cci_clk }; |
| |
| static struct clk *logical_cpu_to_clk(int cpu) |
| { |
| struct device_node *cpu_node; |
| const u32 *cell; |
| u64 hwid; |
| |
| cpu_node = of_get_cpu_node(cpu, NULL); |
| if (!cpu_node) |
| goto fail; |
| |
| cell = of_get_property(cpu_node, "reg", NULL); |
| if (!cell) { |
| pr_err("%s: missing reg property\n", cpu_node->full_name); |
| goto fail; |
| } |
| |
| hwid = of_read_number(cell, of_n_addr_cells(cpu_node)); |
| if ((hwid | pwr_clk.cpu_reg_mask) == pwr_clk.cpu_reg_mask) |
| return &pwr_clk.c; |
| |
| if ((hwid | perf_clk.cpu_reg_mask) == perf_clk.cpu_reg_mask) |
| return &perf_clk.c; |
| |
| fail: |
| return NULL; |
| } |
| |
| static int of_get_fmax_vdd_class(struct platform_device *pdev, struct clk *c, |
| char *prop_name) |
| { |
| struct device_node *of = pdev->dev.of_node; |
| int prop_len, i; |
| struct clk_vdd_class *vdd = c->vdd_class; |
| u32 *array; |
| |
| if (!of_find_property(of, prop_name, &prop_len)) { |
| dev_err(&pdev->dev, "missing %s\n", prop_name); |
| return -EINVAL; |
| } |
| |
| prop_len /= sizeof(u32); |
| if (prop_len % 2) { |
| dev_err(&pdev->dev, "bad length %d\n", prop_len); |
| return -EINVAL; |
| } |
| |
| prop_len /= 2; |
| vdd->level_votes = devm_kzalloc(&pdev->dev, |
| prop_len * sizeof(*vdd->level_votes), |
| GFP_KERNEL); |
| if (!vdd->level_votes) |
| return -ENOMEM; |
| |
| vdd->vdd_uv = devm_kzalloc(&pdev->dev, prop_len * sizeof(int), |
| GFP_KERNEL); |
| if (!vdd->vdd_uv) |
| return -ENOMEM; |
| |
| c->fmax = devm_kzalloc(&pdev->dev, prop_len * sizeof(unsigned long), |
| GFP_KERNEL); |
| if (!c->fmax) |
| return -ENOMEM; |
| |
| array = devm_kzalloc(&pdev->dev, |
| prop_len * sizeof(u32) * 2, GFP_KERNEL); |
| if (!array) |
| return -ENOMEM; |
| |
| of_property_read_u32_array(of, prop_name, array, prop_len * 2); |
| for (i = 0; i < prop_len; i++) { |
| c->fmax[i] = array[2 * i]; |
| vdd->vdd_uv[i] = array[2 * i + 1]; |
| } |
| |
| devm_kfree(&pdev->dev, array); |
| vdd->num_levels = prop_len; |
| vdd->cur_level = prop_len; |
| vdd->use_max_uV = true; |
| c->num_fmax = prop_len; |
| return 0; |
| } |
| |
| static void get_speed_bin(struct platform_device *pdev, int *bin, |
| int *version) |
| { |
| struct resource *res; |
| void __iomem *base; |
| u32 pte_efuse; |
| |
| *bin = 0; |
| *version = 0; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "efuse"); |
| if (!res) { |
| dev_info(&pdev->dev, |
| "No speed/PVS binning available. Defaulting to 0!\n"); |
| return; |
| } |
| |
| base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!base) { |
| dev_warn(&pdev->dev, |
| "Unable to read efuse data. Defaulting to 0!\n"); |
| return; |
| } |
| |
| pte_efuse = readl_relaxed(base); |
| devm_iounmap(&pdev->dev, base); |
| |
| *bin = (pte_efuse >> 8) & 0x7; |
| |
| dev_info(&pdev->dev, "Speed bin: %d PVS Version: %d\n", *bin, |
| *version); |
| } |
| |
| static int cpu_parse_devicetree(struct platform_device *pdev, int mux_id) |
| { |
| struct resource *res; |
| char rcg_name[] = "apcs-xxx-rcg-base"; |
| char vdd_name[] = "vdd-xxx"; |
| struct regulator *regulator; |
| |
| snprintf(rcg_name, ARRAY_SIZE(rcg_name), "apcs-%s-rcg-base", |
| mux_names[mux_id]); |
| |
| res = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, rcg_name); |
| if (!res) { |
| dev_err(&pdev->dev, "missing %s\n", rcg_name); |
| return -EINVAL; |
| } |
| |
| a53ssmux[mux_id]->base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!a53ssmux[mux_id]->base) { |
| dev_err(&pdev->dev, "ioremap failed for %s\n", rcg_name); |
| return -ENOMEM; |
| } |
| |
| snprintf(vdd_name, ARRAY_SIZE(vdd_name), "vdd-%s", mux_names[mux_id]); |
| regulator = devm_regulator_get(&pdev->dev, vdd_name); |
| if (IS_ERR(regulator)) { |
| if (PTR_ERR(regulator) != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "unable to get regulator\n"); |
| return PTR_ERR(regulator); |
| } |
| |
| cpuclk[mux_id]->c.vdd_class->regulator[0] = regulator; |
| |
| return 0; |
| } |
| |
| static int add_opp(struct clk *c, struct device *cpudev, |
| unsigned long max_rate) |
| { |
| unsigned long rate = 0; |
| int level; |
| long ret, uv, corner; |
| int j = 1; |
| |
| if (!cpudev) { |
| pr_warn("clock-cpu: NULL CPU device\n"); |
| return -ENODEV; |
| } |
| |
| while (1) { |
| rate = c->fmax[j++]; |
| |
| level = find_vdd_level(c, rate); |
| if (level <= 0) { |
| pr_warn("clock-cpu: no vdd level for %lu.\n", rate); |
| return -EINVAL; |
| } |
| |
| corner = c->vdd_class->vdd_uv[level]; |
| if (corner < 0) |
| return -EINVAL; |
| |
| /* Get actual voltage corresponding to each corner */ |
| uv = regulator_list_corner_voltage(c->vdd_class->regulator[0], |
| corner); |
| if (uv < 0) { |
| pr_warn("%s: no uv for corner %ld - err: %ld\n", |
| c->dbg_name, corner, uv); |
| return uv; |
| } |
| |
| /* |
| * Populate both CPU and regulator devices with the |
| * freq-to-corner OPP table to maintain backward |
| * compatibility. |
| */ |
| ret = dev_pm_opp_add(cpudev, rate, uv); |
| if (ret) { |
| pr_warn("clock-cpu: couldn't add OPP for %lu\n", |
| rate); |
| return ret; |
| } |
| |
| if (rate >= max_rate) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void print_opp_table(int a53_c0_cpu, int a53_c1_cpu) |
| { |
| struct dev_pm_opp *oppfmax, *oppfmin; |
| unsigned long apc0_fmax, apc1_fmax, apc0_fmin, apc1_fmin; |
| |
| apc0_fmax = pwr_clk.c.fmax[pwr_clk.c.num_fmax - 1]; |
| apc0_fmin = pwr_clk.c.fmax[1]; |
| apc1_fmax = perf_clk.c.fmax[perf_clk.c.num_fmax - 1]; |
| apc1_fmin = perf_clk.c.fmax[1]; |
| |
| rcu_read_lock(); |
| oppfmax = dev_pm_opp_find_freq_exact(get_cpu_device(a53_c0_cpu), |
| apc0_fmax, true); |
| oppfmin = dev_pm_opp_find_freq_exact(get_cpu_device(a53_c0_cpu), |
| apc0_fmin, true); |
| /* |
| * One time information during boot. Important to know that this |
| * looks sane since it can eventually make its way to the |
| * scheduler. |
| */ |
| pr_info("clock_cpu: a53_c0: OPP voltage for %lu: %ld\n", |
| apc0_fmin, dev_pm_opp_get_voltage(oppfmin)); |
| pr_info("clock_cpu: a53_c0: OPP voltage for %lu: %ld\n", |
| apc0_fmax, dev_pm_opp_get_voltage(oppfmax)); |
| |
| oppfmax = dev_pm_opp_find_freq_exact(get_cpu_device(a53_c1_cpu), |
| apc1_fmax, true); |
| oppfmin = dev_pm_opp_find_freq_exact(get_cpu_device(a53_c1_cpu), |
| apc1_fmin, true); |
| pr_info("clock_cpu: a53_c1: OPP voltage for %lu: %lu\n", apc1_fmin, |
| dev_pm_opp_get_voltage(oppfmin)); |
| pr_info("clock_cpu: a53_c1: OPP voltage for %lu: %lu\n", apc1_fmax, |
| dev_pm_opp_get_voltage(oppfmax)); |
| rcu_read_unlock(); |
| } |
| |
| static void populate_opp_table(struct platform_device *pdev) |
| { |
| unsigned long apc0_fmax, apc1_fmax; |
| int cpu, a53_c0_cpu = 0, a53_c1_cpu = 0; |
| struct device *dev; |
| |
| apc0_fmax = pwr_clk.c.fmax[pwr_clk.c.num_fmax - 1]; |
| |
| apc1_fmax = perf_clk.c.fmax[perf_clk.c.num_fmax - 1]; |
| |
| for_each_possible_cpu(cpu) { |
| if (logical_cpu_to_clk(cpu) == &pwr_clk.c) { |
| a53_c0_cpu = cpu; |
| dev = get_cpu_device(cpu); |
| if (!dev) { |
| pr_err("can't find cpu device for attaching OPPs\n"); |
| return; |
| } |
| |
| WARN(add_opp(&pwr_clk.c, dev, apc0_fmax), |
| "Failed to add OPP levels for %d\n", cpu); |
| } |
| |
| if (logical_cpu_to_clk(cpu) == &perf_clk.c) { |
| a53_c1_cpu = cpu; |
| dev = get_cpu_device(cpu); |
| if (!dev) { |
| pr_err("can't find cpu device for attaching OPPs\n"); |
| return; |
| } |
| |
| WARN(add_opp(&perf_clk.c, dev, apc1_fmax), |
| "Failed to add OPP levels for %d\n", cpu); |
| } |
| } |
| /* One time print during bootup */ |
| pr_info("clock-cpu: OPP tables populated (cpu %d and %d)", |
| a53_c0_cpu, a53_c1_cpu); |
| |
| print_opp_table(a53_c0_cpu, a53_c1_cpu); |
| |
| } |
| |
| static int clock_sdm632_pm_event(struct notifier_block *this, |
| unsigned long event, void *ptr) |
| { |
| switch (event) { |
| case PM_POST_HIBERNATION: |
| case PM_POST_SUSPEND: |
| clk_unprepare(&pwr_clk.c); |
| clk_unprepare(&perf_clk.c); |
| clk_unprepare(&cci_clk.c); |
| break; |
| case PM_HIBERNATION_PREPARE: |
| case PM_SUSPEND_PREPARE: |
| clk_prepare(&pwr_clk.c); |
| clk_prepare(&perf_clk.c); |
| clk_prepare(&cci_clk.c); |
| break; |
| default: |
| break; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block clock_sdm632_pm_notifier = { |
| .notifier_call = clock_sdm632_pm_event, |
| }; |
| |
| /** |
| * clock_panic_callback() - panic notification callback function. |
| * This function is invoked when a kernel panic occurs. |
| * @nfb: Notifier block pointer |
| * @event: Value passed unmodified to notifier function |
| * @data: Pointer passed unmodified to notifier function |
| * |
| * Return: NOTIFY_OK |
| */ |
| static int clock_panic_callback(struct notifier_block *nfb, |
| unsigned long event, void *data) |
| { |
| unsigned long rate; |
| |
| rate = (perf_clk.c.count) ? perf_clk.c.rate : 0; |
| pr_err("%s frequency: %10lu Hz\n", perf_clk.c.dbg_name, rate); |
| |
| rate = (pwr_clk.c.count) ? pwr_clk.c.rate : 0; |
| pr_err("%s frequency: %10lu Hz\n", pwr_clk.c.dbg_name, rate); |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block clock_panic_notifier = { |
| .notifier_call = clock_panic_callback, |
| .priority = 1, |
| }; |
| |
| /* Configure PLL at Nominal frequency */ |
| static unsigned long pwrcl_early_boot_rate = 1363200000; |
| static unsigned long perfcl_early_boot_rate = 1401600000; |
| static unsigned long cci_early_boot_rate = 691200000; |
| |
| static int clock_a53_probe(struct platform_device *pdev) |
| { |
| int speed_bin, version, rc, cpu, mux_id; |
| char prop_name[] = "qcom,speedX-bin-vX-XXX"; |
| int mux_num = A53SS_MUX_NUM; |
| struct clk *xo_clk; |
| |
| get_speed_bin(pdev, &speed_bin, &version); |
| |
| xo_clk = devm_clk_get(&pdev->dev, "xo_a"); |
| if (IS_ERR(xo_clk)) { |
| if (PTR_ERR(xo_clk) != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "Unable to get xo clock\n"); |
| return PTR_ERR(xo_clk); |
| } |
| xo_a_clk.c.parent = xo_clk; |
| |
| /* PLL core logic */ |
| vdd_mx.regulator[0] = devm_regulator_get(&pdev->dev, "vdd-mx"); |
| if (IS_ERR(vdd_mx.regulator[0])) { |
| dev_err(&pdev->dev, "Get vdd-mx regulator!!!\n"); |
| if (PTR_ERR(vdd_mx.regulator[0]) != -EPROBE_DEFER) |
| dev_err(&pdev->dev, |
| "Unable to get vdd-mx regulator!!!\n"); |
| return PTR_ERR(vdd_mx.regulator[0]); |
| } |
| |
| for (mux_id = 0; mux_id < mux_num; mux_id++) { |
| rc = cpu_parse_devicetree(pdev, mux_id); |
| if (rc) |
| return rc; |
| |
| snprintf(prop_name, ARRAY_SIZE(prop_name), |
| "qcom,speed%d-bin-v%d-%s", |
| speed_bin, version, mux_names[mux_id]); |
| |
| rc = of_get_fmax_vdd_class(pdev, &cpuclk[mux_id]->c, |
| prop_name); |
| if (rc) { |
| /* Fall back to most conservative PVS table */ |
| dev_err(&pdev->dev, "Unable to load voltage plan %s!\n", |
| prop_name); |
| |
| snprintf(prop_name, ARRAY_SIZE(prop_name), |
| "qcom,speed0-bin-v0-%s", mux_names[mux_id]); |
| rc = of_get_fmax_vdd_class(pdev, &cpuclk[mux_id]->c, |
| prop_name); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Unable to load safe voltage plan\n"); |
| return rc; |
| } |
| dev_info(&pdev->dev, "Safe voltage plan loaded.\n"); |
| } |
| } |
| |
| /* Debug MUX */ |
| meas_base = devm_ioremap(&pdev->dev, GLB_DIAG, SZ_8); |
| if (!meas_base) { |
| dev_err(&pdev->dev, "Failed to ioremap GLB_DIAG registers\n"); |
| return -ENOMEM; |
| } |
| |
| rc = of_msm_clock_register(pdev->dev.of_node, a53_cpu_clocks, |
| ARRAY_SIZE(a53_cpu_clocks)); |
| |
| if (rc) { |
| dev_err(&pdev->dev, "msm_clock_register failed\n"); |
| return rc; |
| } |
| |
| /* Force to move to PLL configuartion */ |
| rc = clk_set_rate(&cci_clk.c, cci_early_boot_rate); |
| if (rc) |
| dev_err(&pdev->dev, "Can't set CCI PLL rate for CCI\n"); |
| |
| rc = clk_set_rate(&pwr_clk.c, pwrcl_early_boot_rate); |
| if (rc) |
| dev_err(&pdev->dev, "Can't set pwr PLL rate for Cluster-0 %ld\n", |
| pwrcl_early_boot_rate); |
| |
| rc = clk_set_rate(&perf_clk.c, perfcl_early_boot_rate); |
| if (rc) |
| dev_err(&pdev->dev, "Can't set perf PLL rate for Cluster-1 %ld\n", |
| perfcl_early_boot_rate); |
| |
| rc = clock_rcgwr_init(pdev); |
| if (rc) |
| dev_err(&pdev->dev, "Failed to init RCGwR\n"); |
| |
| /* |
| * We don't want the CPU clocks to be turned off at late init |
| * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the |
| * refcount of these clocks. Any cpufreq/hotplug manager can assume |
| * that the clocks have already been prepared and enabled by the time |
| * they take over. |
| */ |
| get_online_cpus(); |
| for_each_online_cpu(cpu) { |
| WARN(clk_prepare_enable(&cpuclk[cpu/4]->c), |
| "Unable to turn on CPU clock"); |
| WARN(clk_prepare_enable(&cci_clk.c), |
| "Unable to turn on CCI clock"); |
| } |
| put_online_cpus(); |
| |
| for_each_possible_cpu(cpu) { |
| if (logical_cpu_to_clk(cpu) == &perf_clk.c) |
| cpumask_set_cpu(cpu, &perf_clk.cpumask); |
| if (logical_cpu_to_clk(cpu) == &pwr_clk.c) |
| cpumask_set_cpu(cpu, &pwr_clk.cpumask); |
| } |
| |
| pwr_clk.hw_low_power_ctrl = true; |
| perf_clk.hw_low_power_ctrl = true; |
| |
| register_pm_notifier(&clock_sdm632_pm_notifier); |
| |
| populate_opp_table(pdev); |
| |
| atomic_notifier_chain_register(&panic_notifier_list, |
| &clock_panic_notifier); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id clock_a53_match_table[] = { |
| {.compatible = "qcom,cpu-clock-sdm632"}, |
| {} |
| }; |
| |
| static struct platform_driver clock_a53_driver = { |
| .probe = clock_a53_probe, |
| .driver = { |
| .name = "cpu-clock-sdm632", |
| .of_match_table = clock_a53_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init clock_a53_init(void) |
| { |
| return platform_driver_register(&clock_a53_driver); |
| } |
| arch_initcall(clock_a53_init); |
| |
| static int __init clock_cpu_lpm_get_latency(void) |
| { |
| int rc = 0; |
| struct device_node *ofnode = of_find_compatible_node(NULL, NULL, |
| "qcom,cpu-clock-sdm632"); |
| |
| if (!ofnode) |
| return 0; |
| |
| rc = lpm_get_latency(&perf_clk.latency_lvl, |
| &perf_clk.cpu_latency_no_l2_pc_us); |
| if (rc < 0) |
| pr_err("Failed to get the L2 PC value for perf\n"); |
| |
| rc = lpm_get_latency(&pwr_clk.latency_lvl, |
| &pwr_clk.cpu_latency_no_l2_pc_us); |
| if (rc < 0) |
| pr_err("Failed to get the L2 PC value for pwr\n"); |
| |
| pr_debug("Latency for pwr/perf cluster %d : %d\n", |
| pwr_clk.cpu_latency_no_l2_pc_us, |
| perf_clk.cpu_latency_no_l2_pc_us); |
| |
| return rc; |
| } |
| late_initcall(clock_cpu_lpm_get_latency); |
| |
| #define PWR_PLL_BASE 0xb116000 |
| #define PERF_PLL_BASE 0xb016000 |
| #define CCI_PLL_BASE 0xb1d0000 |
| #define APCS_ALIAS1_CMD_RCGR 0xb011050 |
| #define APCS_ALIAS1_CFG_OFF 0x4 |
| #define APCS_ALIAS1_CORE_CBCR_OFF 0x8 |
| #define SRC_SEL 0x4 |
| #define SRC_DIV 0x1 |
| |
| /* Dummy clock for setting the rate of CCI PLL in early_init*/ |
| DEFINE_CLK_DUMMY(p_clk, 19200000); |
| |
| static int __init cpu_clock_init(void) |
| { |
| void __iomem *base; |
| int regval = 0, count; |
| struct device_node *ofnode = of_find_compatible_node(NULL, NULL, |
| "qcom,cpu-clock-sdm632"); |
| if (!ofnode) |
| return 0; |
| |
| virt_bases[APCS_C0_PLL_BASE] = ioremap_nocache(PWR_PLL_BASE, SZ_1K); |
| virt_bases[APCS_C1_PLL_BASE] = ioremap_nocache(PERF_PLL_BASE, SZ_1K); |
| virt_bases[APCS_CCI_PLL_BASE] = ioremap_nocache(CCI_PLL_BASE, SZ_1K); |
| clk_ops_variable_rate = clk_ops_variable_rate_pll_hwfsm; |
| clk_ops_variable_rate.list_registers = variable_pll_list_registers; |
| |
| /* Initialize the PLLs */ |
| __variable_rate_pll_init(&apcs_c0_pll.c); |
| __variable_rate_pll_init(&apcs_c1_pll.c); |
| __init_alpha_pll(&apcs_cci_pll.c); |
| |
| /* Enable the PLLs */ |
| apcs_c0_pll.c.ops->set_rate(&apcs_c0_pll.c, pwrcl_early_boot_rate); |
| clk_ops_variable_rate_pll.enable(&apcs_c0_pll.c); |
| |
| apcs_c1_pll.c.ops->set_rate(&apcs_c1_pll.c, perfcl_early_boot_rate); |
| clk_ops_variable_rate_pll.enable(&apcs_c1_pll.c); |
| |
| apcs_cci_pll.c.parent = (struct clk *)&p_clk; |
| apcs_cci_pll.c.ops->set_rate(&apcs_cci_pll.c, cci_early_boot_rate); |
| clk_ops_dyna_alpha_pll.enable(&apcs_cci_pll.c); |
| |
| base = ioremap_nocache(APCS_ALIAS1_CMD_RCGR, SZ_8); |
| regval = readl_relaxed(base); |
| |
| /* Source from GPLL0 */ |
| regval = (SRC_SEL << 8) | SRC_DIV; /* 0x401 */ |
| writel_relaxed(regval, base + APCS_ALIAS1_CFG_OFF); |
| /* Make sure src sel and src div is set before update bit */ |
| mb(); |
| |
| /* update bit */ |
| regval = readl_relaxed(base); |
| regval |= BIT(0); |
| writel_relaxed(regval, base); |
| /* Make sure src sel and src div is set before update bit */ |
| mb(); |
| |
| /* Wait for update to take effect */ |
| for (count = 500; count > 0; count--) { |
| if (!(readl_relaxed(base)) & BIT(0)) |
| break; |
| udelay(1); |
| } |
| |
| /* Enable the branch */ |
| regval = readl_relaxed(base + APCS_ALIAS1_CORE_CBCR_OFF); |
| regval |= BIT(0); |
| writel_relaxed(regval, base + APCS_ALIAS1_CORE_CBCR_OFF); |
| |
| /* Branch enable should be complete */ |
| mb(); |
| iounmap(base); |
| |
| pr_info("CPU clocks configured\n"); |
| |
| return 0; |
| } |
| early_initcall(cpu_clock_init); |