drivers/scsi/fcal.c - kernel/msm-4.9 - Gitiles

 /* fcal.c: Fibre Channel Arbitrated Loop SCSI host adapter driver.
  *
  * Copyright (C) 1998,1999 Jakub Jelinek (jj@ultra.linux.cz)
  *
  */

 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <linux/init.h>
 #include <linux/config.h>
 #ifdef CONFIG_KMOD
 #include <linux/kmod.h>
 #endif

 #include <asm/irq.h>

 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include "../fc4/fcp_impl.h"
 #include "fcal.h"

 #include <linux/module.h>

 /* #define FCAL_DEBUG */

 #define fcal_printk printk ("FCAL %s: ", fc->name); printk

 #ifdef FCAL_DEBUG
 #define FCALD(x)  fcal_printk x;
 #define FCALND(x) printk ("FCAL: "); printk x;
 #else
 #define FCALD(x)
 #define FCALND(x)
 #endif

 static unsigned char alpa2target[] = {
 0x7e, 0x7d, 0x7c, 0xff, 0x7b, 0xff, 0xff, 0xff, 0x7a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x79,
 0x78, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x77, 0x76, 0xff, 0xff, 0x75, 0xff, 0x74, 0x73, 0x72,
 0xff, 0xff, 0xff, 0x71, 0xff, 0x70, 0x6f, 0x6e, 0xff, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x68, 0xff,
 0xff, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0xff, 0xff, 0x61, 0x60, 0xff, 0x5f, 0xff, 0xff, 0xff,
 0xff, 0xff, 0xff, 0x5e, 0xff, 0x5d, 0x5c, 0x5b, 0xff, 0x5a, 0x59, 0x58, 0x57, 0x56, 0x55, 0xff,
 0xff, 0x54, 0x53, 0x52, 0x51, 0x50, 0x4f, 0xff, 0xff, 0x4e, 0x4d, 0xff, 0x4c, 0xff, 0xff, 0xff,
 0xff, 0xff, 0xff, 0x4b, 0xff, 0x4a, 0x49, 0x48, 0xff, 0x47, 0x46, 0x45, 0x44, 0x43, 0x42, 0xff,
 0xff, 0x41, 0x40, 0x3f, 0x3e, 0x3d, 0x3c, 0xff, 0xff, 0x3b, 0x3a, 0xff, 0x39, 0xff, 0xff, 0xff,
 0x38, 0x37, 0x36, 0xff, 0x35, 0xff, 0xff, 0xff, 0x34, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x33,
 0x32, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x31, 0x30, 0xff, 0xff, 0x2f, 0xff, 0x2e, 0x2d, 0x2c,
 0xff, 0xff, 0xff, 0x2b, 0xff, 0x2a, 0x29, 0x28, 0xff, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0xff,
 0xff, 0x21, 0x20, 0x1f, 0x1e, 0x1d, 0x1c, 0xff, 0xff, 0x1b, 0x1a, 0xff, 0x19, 0xff, 0xff, 0xff,
 0xff, 0xff, 0xff, 0x18, 0xff, 0x17, 0x16, 0x15, 0xff, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0xff,
 0xff, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0xff, 0xff, 0x08, 0x07, 0xff, 0x06, 0xff, 0xff, 0xff,
 0x05, 0x04, 0x03, 0xff, 0x02, 0xff, 0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
 };

 static unsigned char target2alpa[] = {
 0xef, 0xe8, 0xe4, 0xe2, 0xe1, 0xe0, 0xdc, 0xda, 0xd9, 0xd6, 0xd5, 0xd4, 0xd3, 0xd2, 0xd1, 0xce,
 0xcd, 0xcc, 0xcb, 0xca, 0xc9, 0xc7, 0xc6, 0xc5, 0xc3, 0xbc, 0xba, 0xb9, 0xb6, 0xb5, 0xb4, 0xb3,
 0xb2, 0xb1, 0xae, 0xad, 0xac, 0xab, 0xaa, 0xa9, 0xa7, 0xa6, 0xa5, 0xa3, 0x9f, 0x9e, 0x9d, 0x9b,
 0x98, 0x97, 0x90, 0x8f, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7c, 0x7a, 0x79, 0x76, 0x75, 0x74, 0x73,
 0x72, 0x71, 0x6e, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5c, 0x5a, 0x59, 0x56,
 0x55, 0x54, 0x53, 0x52, 0x51, 0x4e, 0x4d, 0x4c, 0x4b, 0x4a, 0x49, 0x47, 0x46, 0x45, 0x43, 0x3c,
 0x3a, 0x39, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x27, 0x26,
 0x25, 0x23, 0x1f, 0x1e, 0x1d, 0x1b, 0x18, 0x17, 0x10, 0x0f, 0x08, 0x04, 0x02, 0x01, 0x00
 };

 static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd);

 int fcal_slave_configure(Scsi_Device *device)
 {
 	int depth_to_use;

 	if (device->tagged_supported)
 		depth_to_use = /* 254 */ 8;
 	else
 		depth_to_use = 2;

 	scsi_adjust_queue_depth(device,
 				(device->tagged_supported ?
 				 MSG_SIMPLE_TAG : 0),
 				depth_to_use);

 	return 0;
 }

 /* Detect all FC Arbitrated Loops attached to the machine.
    fc4 module has done all the work for us... */
 int __init fcal_detect(Scsi_Host_Template *tpnt)
 {
 	int nfcals = 0;
 	fc_channel *fc;
 	int fcalcount;
 	int i;

 	tpnt->proc_name = "fcal";
 	fcalcount = 0;
 	for_each_online_fc_channel(fc)
 		if (fc->posmap)
 			fcalcount++;
 	FCALND(("%d channels online\n", fcalcount))
 	if (!fcalcount) {
 #if defined(MODULE) && defined(CONFIG_FC4_SOCAL_MODULE) && defined(CONFIG_KMOD)
 		request_module("socal");

 		for_each_online_fc_channel(fc)
 			if (fc->posmap)
 				fcalcount++;
 		if (!fcalcount)
 #endif
 			return 0;
 	}
 	for_each_online_fc_channel(fc) {
 		struct Scsi_Host *host;
 		long *ages;
 		struct fcal *fcal;

 		if (!fc->posmap) continue;

 		/* Strange, this is already registered to some other SCSI host, then it cannot be fcal */
 		if (fc->scsi_name[0]) continue;
 		memcpy (fc->scsi_name, "FCAL", 4);

 		fc->can_queue = FCAL_CAN_QUEUE;
 		fc->rsp_size = 64;
 		fc->encode_addr = fcal_encode_addr;

 		ages = kmalloc (128 * sizeof(long), GFP_KERNEL);
 		if (!ages) continue;

 		host = scsi_register (tpnt, sizeof (struct fcal));
 		if (!host)
 		{
 			kfree(ages);
 			continue;
 		}

 		if (!try_module_get(fc->module)) {
 			kfree(ages);
 			scsi_unregister(host);
 			continue;
 		}

 		nfcals++;

 		fcal = (struct fcal *)host->hostdata;

 		fc->fcp_register(fc, TYPE_SCSI_FCP, 0);

 		for (i = 0; i < fc->posmap->len; i++) {
 			int status, target, alpa;

 			alpa = fc->posmap->list[i];
 			FCALD(("Sending PLOGI to %02x\n", alpa))
 			target = alpa2target[alpa];
 			status = fc_do_plogi(fc, alpa, fcal->node_wwn + target,
 					     fcal->nport_wwn + target);
 			FCALD(("PLOGI returned with status %d\n", status))
 			if (status != FC_STATUS_OK)
 				continue;
 			FCALD(("Sending PRLI to %02x\n", alpa))
 			status = fc_do_prli(fc, alpa);
 			FCALD(("PRLI returned with status %d\n", status))
 			if (status == FC_STATUS_OK)
 				fcal->map[target] = 1;
 		}

 		host->max_id = 127;
 		host->irq = fc->irq;
 #ifdef __sparc_v9__
 		host->unchecked_isa_dma = 1;
 #endif

 		fc->channels = 1;
 		fc->targets = 127;
 		fc->ages = ages;
 		memset (ages, 0, 128 * sizeof(long));

 		fcal->fc = fc;

 		FCALD(("Found FCAL\n"))
 	}
 	if (nfcals)
 #ifdef __sparc__
 		printk ("FCAL: Total of %d Sun Enterprise Network Array (A5000 or EX500) channels found\n", nfcals);
 #else
 		printk ("FCAL: Total of %d Fibre Channel Arbitrated Loops found\n", nfcals);
 #endif
 	return nfcals;
 }

 int fcal_release(struct Scsi_Host *host)
 {
 	struct fcal *fcal = (struct fcal *)host->hostdata;
 	fc_channel *fc = fcal->fc;

 	module_put(fc->module);

 	fc->fcp_register(fc, TYPE_SCSI_FCP, 1);
 	FCALND((" releasing fcal.\n"));
 	kfree (fc->ages);
 	FCALND(("released fcal!\n"));
 	return 0;
 }

 #undef SPRINTF
 #define SPRINTF(args...) { if (pos < (buffer + length)) pos += sprintf (pos, ## args); }

 int fcal_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int inout)
 {
 	struct fcal *fcal;
 	fc_channel *fc;
 	char *pos = buffer;
 	int i, j;

 	if (inout) return length;

 	fcal = (struct fcal *)host->hostdata;
 	fc = fcal->fc;

 #ifdef __sparc__
 	SPRINTF ("Sun Enterprise Network Array (A5000 or E?500) on %s PROM node %x\n", fc->name, fc->dev->prom_node);
 #else
 	SPRINTF ("Fibre Channel Arbitrated Loop on %s\n", fc->name);
 #endif
 	SPRINTF ("Initiator AL-PA: %02x\n", fc->sid);

 	SPRINTF ("\nAttached devices:\n");

 	for (i = 0; i < fc->posmap->len; i++) {
 		unsigned char alpa = fc->posmap->list[i];
 		unsigned char target;
 		u32 *u1, *u2;

 		target = alpa2target[alpa];
 		u1 = (u32 *)&fcal->nport_wwn[target];
 		u2 = (u32 *)&fcal->node_wwn[target];
 		if (!u1[0] && !u1[1]) {
 			SPRINTF ("  [AL-PA: %02x] Not responded to PLOGI\n", alpa);
 		} else if (!fcal->map[target]) {
 			SPRINTF ("  [AL-PA: %02x, Port WWN: %08x%08x, Node WWN: %08x%08x] Not responded to PRLI\n",
 				 alpa, u1[0], u1[1], u2[0], u2[1]);
 		} else {
 			Scsi_Device *scd;
 			shost_for_each_device(scd, host)
 				if (scd->id == target) {
 					SPRINTF ("  [AL-PA: %02x, Id: %02d, Port WWN: %08x%08x, Node WWN: %08x%08x]  ",
 						alpa, target, u1[0], u1[1], u2[0], u2[1]);
 					SPRINTF ("%s ", (scd->type < MAX_SCSI_DEVICE_CODE) ?
 						scsi_device_types[(short) scd->type] : "Unknown device");

 					for (j = 0; (j < 8) && (scd->vendor[j] >= 0x20); j++)
 						SPRINTF ("%c", scd->vendor[j]);
 					SPRINTF (" ");

 					for (j = 0; (j < 16) && (scd->model[j] >= 0x20); j++)
 						SPRINTF ("%c", scd->model[j]);

 					SPRINTF ("\n");
 				}
 		}
 	}
 	SPRINTF ("\n");

 	*start = buffer + offset;

 	if ((pos - buffer) < offset)
 		return 0;
 	else if (pos - buffer - offset < length)
 		return pos - buffer - offset;
 	else
 		return length;
 }

 /*
    For FC-AL, we use a simple addressing: we have just one channel 0,
    and all AL-PAs are mapped to targets 0..0x7e
  */
 static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd)
 {
 	struct fcal *f;

 	/* We don't support LUNs yet - I'm not sure if LUN should be in SCSI fcp_cdb, or in second byte of addr[0] */
 	if (SCpnt->cmnd[1] & 0xe0) return -EINVAL;
 	/* FC-PLDA tells us... */
 	memset(addr, 0, 8);
 	f = (struct fcal *)SCpnt->device->host->hostdata;
 	if (!f->map[SCpnt->device->id])
 		return -EINVAL;
 	/* Now, determine DID: It will be Native Identifier, so we zero upper
 	   2 bytes of the 3 byte DID, lowest byte will be AL-PA */
 	fcmd->did = target2alpa[SCpnt->device->id];
 	FCALD(("trying DID %06x\n", fcmd->did))
 	return 0;
 }

 static Scsi_Host_Template driver_template = {
 	.name			= "Fibre Channel Arbitrated Loop",
 	.detect			= fcal_detect,
 	.release		= fcal_release,
 	.proc_info		= fcal_proc_info,
 	.queuecommand		= fcp_scsi_queuecommand,
 	.slave_configure	= fcal_slave_configure,
 	.can_queue		= FCAL_CAN_QUEUE,
 	.this_id		= -1,
 	.sg_tablesize		= 1,
 	.cmd_per_lun		= 1,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_abort_handler	= fcp_scsi_abort,
 	.eh_device_reset_handler = fcp_scsi_dev_reset,
 	.eh_host_reset_handler	= fcp_scsi_host_reset,
 };
 #include "scsi_module.c"

 MODULE_LICENSE("GPL");
	/* fcal.c: Fibre Channel Arbitrated Loop SCSI host adapter driver.
	*
	* Copyright (C) 1998,1999 Jakub Jelinek (jj@ultra.linux.cz)
	*
	*/

	#include <linux/kernel.h>
	#include <linux/delay.h>
	#include <linux/types.h>
	#include <linux/string.h>
	#include <linux/slab.h>
	#include <linux/blkdev.h>
	#include <linux/proc_fs.h>
	#include <linux/stat.h>
	#include <linux/init.h>
	#include <linux/config.h>
	#ifdef CONFIG_KMOD
	#include <linux/kmod.h>
	#endif

	#include <asm/irq.h>

	#include "scsi.h"
	#include <scsi/scsi_host.h>
	#include "../fc4/fcp_impl.h"
	#include "fcal.h"

	#include <linux/module.h>

	/* #define FCAL_DEBUG */

	#define fcal_printk printk ("FCAL %s: ", fc->name); printk

	#ifdef FCAL_DEBUG
	#define FCALD(x) fcal_printk x;
	#define FCALND(x) printk ("FCAL: "); printk x;
	#else
	#define FCALD(x)
	#define FCALND(x)
	#endif

	static unsigned char alpa2target[] = {
	0x7e, 0x7d, 0x7c, 0xff, 0x7b, 0xff, 0xff, 0xff, 0x7a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x79,
	0x78, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x77, 0x76, 0xff, 0xff, 0x75, 0xff, 0x74, 0x73, 0x72,
	0xff, 0xff, 0xff, 0x71, 0xff, 0x70, 0x6f, 0x6e, 0xff, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x68, 0xff,
	0xff, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0xff, 0xff, 0x61, 0x60, 0xff, 0x5f, 0xff, 0xff, 0xff,
	0xff, 0xff, 0xff, 0x5e, 0xff, 0x5d, 0x5c, 0x5b, 0xff, 0x5a, 0x59, 0x58, 0x57, 0x56, 0x55, 0xff,
	0xff, 0x54, 0x53, 0x52, 0x51, 0x50, 0x4f, 0xff, 0xff, 0x4e, 0x4d, 0xff, 0x4c, 0xff, 0xff, 0xff,
	0xff, 0xff, 0xff, 0x4b, 0xff, 0x4a, 0x49, 0x48, 0xff, 0x47, 0x46, 0x45, 0x44, 0x43, 0x42, 0xff,
	0xff, 0x41, 0x40, 0x3f, 0x3e, 0x3d, 0x3c, 0xff, 0xff, 0x3b, 0x3a, 0xff, 0x39, 0xff, 0xff, 0xff,
	0x38, 0x37, 0x36, 0xff, 0x35, 0xff, 0xff, 0xff, 0x34, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x33,
	0x32, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x31, 0x30, 0xff, 0xff, 0x2f, 0xff, 0x2e, 0x2d, 0x2c,
	0xff, 0xff, 0xff, 0x2b, 0xff, 0x2a, 0x29, 0x28, 0xff, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0xff,
	0xff, 0x21, 0x20, 0x1f, 0x1e, 0x1d, 0x1c, 0xff, 0xff, 0x1b, 0x1a, 0xff, 0x19, 0xff, 0xff, 0xff,
	0xff, 0xff, 0xff, 0x18, 0xff, 0x17, 0x16, 0x15, 0xff, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0xff,
	0xff, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0xff, 0xff, 0x08, 0x07, 0xff, 0x06, 0xff, 0xff, 0xff,
	0x05, 0x04, 0x03, 0xff, 0x02, 0xff, 0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
	};

	static unsigned char target2alpa[] = {
	0xef, 0xe8, 0xe4, 0xe2, 0xe1, 0xe0, 0xdc, 0xda, 0xd9, 0xd6, 0xd5, 0xd4, 0xd3, 0xd2, 0xd1, 0xce,
	0xcd, 0xcc, 0xcb, 0xca, 0xc9, 0xc7, 0xc6, 0xc5, 0xc3, 0xbc, 0xba, 0xb9, 0xb6, 0xb5, 0xb4, 0xb3,
	0xb2, 0xb1, 0xae, 0xad, 0xac, 0xab, 0xaa, 0xa9, 0xa7, 0xa6, 0xa5, 0xa3, 0x9f, 0x9e, 0x9d, 0x9b,
	0x98, 0x97, 0x90, 0x8f, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7c, 0x7a, 0x79, 0x76, 0x75, 0x74, 0x73,
	0x72, 0x71, 0x6e, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5c, 0x5a, 0x59, 0x56,
	0x55, 0x54, 0x53, 0x52, 0x51, 0x4e, 0x4d, 0x4c, 0x4b, 0x4a, 0x49, 0x47, 0x46, 0x45, 0x43, 0x3c,
	0x3a, 0x39, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x27, 0x26,
	0x25, 0x23, 0x1f, 0x1e, 0x1d, 0x1b, 0x18, 0x17, 0x10, 0x0f, 0x08, 0x04, 0x02, 0x01, 0x00
	};

	static int fcal_encode_addr(Scsi_Cmnd SCpnt, u16 addr, fc_channel fc, fcp_cmnd fcmd);

	int fcal_slave_configure(Scsi_Device *device)
	{
	int depth_to_use;

	if (device->tagged_supported)
	depth_to_use = /* 254 */ 8;
	else
	depth_to_use = 2;

	scsi_adjust_queue_depth(device,
	(device->tagged_supported ?
	MSG_SIMPLE_TAG : 0),
	depth_to_use);

	return 0;
	}

	/* Detect all FC Arbitrated Loops attached to the machine.
	fc4 module has done all the work for us... */
	int __init fcal_detect(Scsi_Host_Template *tpnt)
	{
	int nfcals = 0;
	fc_channel *fc;
	int fcalcount;
	int i;

	tpnt->proc_name = "fcal";
	fcalcount = 0;
	for_each_online_fc_channel(fc)
	if (fc->posmap)
	fcalcount++;
	FCALND(("%d channels online\n", fcalcount))
	if (!fcalcount) {
	#if defined(MODULE) && defined(CONFIG_FC4_SOCAL_MODULE) && defined(CONFIG_KMOD)
	request_module("socal");

	for_each_online_fc_channel(fc)
	if (fc->posmap)
	fcalcount++;
	if (!fcalcount)
	#endif
	return 0;
	}
	for_each_online_fc_channel(fc) {
	struct Scsi_Host *host;
	long *ages;
	struct fcal *fcal;

	if (!fc->posmap) continue;

	/* Strange, this is already registered to some other SCSI host, then it cannot be fcal */
	if (fc->scsi_name[0]) continue;
	memcpy (fc->scsi_name, "FCAL", 4);

	fc->can_queue = FCAL_CAN_QUEUE;
	fc->rsp_size = 64;
	fc->encode_addr = fcal_encode_addr;

	ages = kmalloc (128 * sizeof(long), GFP_KERNEL);
	if (!ages) continue;

	host = scsi_register (tpnt, sizeof (struct fcal));
	if (!host)
	{
	kfree(ages);
	continue;
	}

	if (!try_module_get(fc->module)) {
	kfree(ages);
	scsi_unregister(host);
	continue;
	}

	nfcals++;

	fcal = (struct fcal *)host->hostdata;

	fc->fcp_register(fc, TYPE_SCSI_FCP, 0);

	for (i = 0; i < fc->posmap->len; i++) {
	int status, target, alpa;

	alpa = fc->posmap->list[i];
	FCALD(("Sending PLOGI to %02x\n", alpa))
	target = alpa2target[alpa];
	status = fc_do_plogi(fc, alpa, fcal->node_wwn + target,
	fcal->nport_wwn + target);
	FCALD(("PLOGI returned with status %d\n", status))
	if (status != FC_STATUS_OK)
	continue;
	FCALD(("Sending PRLI to %02x\n", alpa))
	status = fc_do_prli(fc, alpa);
	FCALD(("PRLI returned with status %d\n", status))
	if (status == FC_STATUS_OK)
	fcal->map[target] = 1;
	}

	host->max_id = 127;
	host->irq = fc->irq;
	#ifdef __sparc_v9__
	host->unchecked_isa_dma = 1;
	#endif

	fc->channels = 1;
	fc->targets = 127;
	fc->ages = ages;
	memset (ages, 0, 128 * sizeof(long));

	fcal->fc = fc;

	FCALD(("Found FCAL\n"))
	}
	if (nfcals)
	#ifdef __sparc__
	printk ("FCAL: Total of %d Sun Enterprise Network Array (A5000 or EX500) channels found\n", nfcals);
	#else
	printk ("FCAL: Total of %d Fibre Channel Arbitrated Loops found\n", nfcals);
	#endif
	return nfcals;
	}

	int fcal_release(struct Scsi_Host *host)
	{
	struct fcal fcal = (struct fcal )host->hostdata;
	fc_channel *fc = fcal->fc;

	module_put(fc->module);

	fc->fcp_register(fc, TYPE_SCSI_FCP, 1);
	FCALND((" releasing fcal.\n"));
	kfree (fc->ages);
	FCALND(("released fcal!\n"));
	return 0;
	}

	#undef SPRINTF
	#define SPRINTF(args...) { if (pos < (buffer + length)) pos += sprintf (pos, ## args); }

	int fcal_proc_info (struct Scsi_Host host, char buffer, char **start, off_t offset, int length, int inout)
	{
	struct fcal *fcal;
	fc_channel *fc;
	char *pos = buffer;
	int i, j;

	if (inout) return length;

	fcal = (struct fcal *)host->hostdata;
	fc = fcal->fc;

	#ifdef __sparc__
	SPRINTF ("Sun Enterprise Network Array (A5000 or E?500) on %s PROM node %x\n", fc->name, fc->dev->prom_node);
	#else
	SPRINTF ("Fibre Channel Arbitrated Loop on %s\n", fc->name);
	#endif
	SPRINTF ("Initiator AL-PA: %02x\n", fc->sid);

	SPRINTF ("\nAttached devices:\n");

	for (i = 0; i < fc->posmap->len; i++) {
	unsigned char alpa = fc->posmap->list[i];
	unsigned char target;
	u32 u1, u2;

	target = alpa2target[alpa];
	u1 = (u32 *)&fcal->nport_wwn[target];
	u2 = (u32 *)&fcal->node_wwn[target];
	if (!u1[0] && !u1[1]) {
	SPRINTF (" [AL-PA: %02x] Not responded to PLOGI\n", alpa);
	} else if (!fcal->map[target]) {
	SPRINTF (" [AL-PA: %02x, Port WWN: %08x%08x, Node WWN: %08x%08x] Not responded to PRLI\n",
	alpa, u1[0], u1[1], u2[0], u2[1]);
	} else {
	Scsi_Device *scd;
	shost_for_each_device(scd, host)
	if (scd->id == target) {
	SPRINTF (" [AL-PA: %02x, Id: %02d, Port WWN: %08x%08x, Node WWN: %08x%08x] ",
	alpa, target, u1[0], u1[1], u2[0], u2[1]);
	SPRINTF ("%s ", (scd->type < MAX_SCSI_DEVICE_CODE) ?
	scsi_device_types[(short) scd->type] : "Unknown device");

	for (j = 0; (j < 8) && (scd->vendor[j] >= 0x20); j++)
	SPRINTF ("%c", scd->vendor[j]);
	SPRINTF (" ");

	for (j = 0; (j < 16) && (scd->model[j] >= 0x20); j++)
	SPRINTF ("%c", scd->model[j]);

	SPRINTF ("\n");
	}
	}
	}
	SPRINTF ("\n");

	*start = buffer + offset;

	if ((pos - buffer) < offset)
	return 0;
	else if (pos - buffer - offset < length)
	return pos - buffer - offset;
	else
	return length;
	}

	/*
	For FC-AL, we use a simple addressing: we have just one channel 0,
	and all AL-PAs are mapped to targets 0..0x7e
	*/
	static int fcal_encode_addr(Scsi_Cmnd SCpnt, u16 addr, fc_channel fc, fcp_cmnd fcmd)
	{
	struct fcal *f;

	/* We don't support LUNs yet - I'm not sure if LUN should be in SCSI fcp_cdb, or in second byte of addr[0] */
	if (SCpnt->cmnd[1] & 0xe0) return -EINVAL;
	/* FC-PLDA tells us... */
	memset(addr, 0, 8);
	f = (struct fcal *)SCpnt->device->host->hostdata;
	if (!f->map[SCpnt->device->id])
	return -EINVAL;
	/* Now, determine DID: It will be Native Identifier, so we zero upper
	2 bytes of the 3 byte DID, lowest byte will be AL-PA */
	fcmd->did = target2alpa[SCpnt->device->id];
	FCALD(("trying DID %06x\n", fcmd->did))
	return 0;
	}

	static Scsi_Host_Template driver_template = {
	.name = "Fibre Channel Arbitrated Loop",
	.detect = fcal_detect,
	.release = fcal_release,
	.proc_info = fcal_proc_info,
	.queuecommand = fcp_scsi_queuecommand,
	.slave_configure = fcal_slave_configure,
	.can_queue = FCAL_CAN_QUEUE,
	.this_id = -1,
	.sg_tablesize = 1,
	.cmd_per_lun = 1,
	.use_clustering = ENABLE_CLUSTERING,
	.eh_abort_handler = fcp_scsi_abort,
	.eh_device_reset_handler = fcp_scsi_dev_reset,
	.eh_host_reset_handler = fcp_scsi_host_reset,
	};
	#include "scsi_module.c"

	MODULE_LICENSE("GPL");