include/asm-cris/bitops.h - kernel/msm-4.9 - Gitiles

 /* asm/bitops.h for Linux/CRIS
  *
  * TODO: asm versions if speed is needed
  *
  * All bit operations return 0 if the bit was cleared before the
  * operation and != 0 if it was not.
  *
  * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
  */

 #ifndef _CRIS_BITOPS_H
 #define _CRIS_BITOPS_H

 /* Currently this is unsuitable for consumption outside the kernel.  */
 #ifdef __KERNEL__

 #include <asm/arch/bitops.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <linux/compiler.h>

 /*
  * Some hacks to defeat gcc over-optimizations..
  */
 struct __dummy { unsigned long a[100]; };
 #define ADDR (*(struct __dummy *) addr)
 #define CONST_ADDR (*(const struct __dummy *) addr)

 /*
  * set_bit - Atomically set a bit in memory
  * @nr: the bit to set
  * @addr: the address to start counting from
  *
  * This function is atomic and may not be reordered.  See __set_bit()
  * if you do not require the atomic guarantees.
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */

 #define set_bit(nr, addr)    (void)test_and_set_bit(nr, addr)

 #define __set_bit(nr, addr)    (void)__test_and_set_bit(nr, addr)

 /*
  * clear_bit - Clears a bit in memory
  * @nr: Bit to clear
  * @addr: Address to start counting from
  *
  * clear_bit() is atomic and may not be reordered.  However, it does
  * not contain a memory barrier, so if it is used for locking purposes,
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */

 #define clear_bit(nr, addr)  (void)test_and_clear_bit(nr, addr)

 #define __clear_bit(nr, addr)  (void)__test_and_clear_bit(nr, addr)

 /*
  * change_bit - Toggle a bit in memory
  * @nr: Bit to change
  * @addr: Address to start counting from
  *
  * change_bit() is atomic and may not be reordered.
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */

 #define change_bit(nr, addr) (void)test_and_change_bit(nr, addr)

 /*
  * __change_bit - Toggle a bit in memory
  * @nr: the bit to change
  * @addr: the address to start counting from
  *
  * Unlike change_bit(), this function is non-atomic and may be reordered.
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */

 #define __change_bit(nr, addr) (void)__test_and_change_bit(nr, addr)

 /**
  * test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
  *
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */

 extern inline int test_and_set_bit(int nr, volatile unsigned long *addr)
 {
 	unsigned int mask, retval;
 	unsigned long flags;
 	unsigned int *adr = (unsigned int *)addr;

 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	cris_atomic_save(addr, flags);
 	retval = (mask & *adr) != 0;
 	*adr |= mask;
 	cris_atomic_restore(addr, flags);
 	local_irq_restore(flags);
 	return retval;
 }

 extern inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
 {
 	unsigned int mask, retval;
 	unsigned int *adr = (unsigned int *)addr;

 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	retval = (mask & *adr) != 0;
 	*adr |= mask;
 	return retval;
 }

 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
 #define smp_mb__before_clear_bit()      barrier()
 #define smp_mb__after_clear_bit()       barrier()

 /**
  * test_and_clear_bit - Clear a bit and return its old value
  * @nr: Bit to clear
  * @addr: Address to count from
  *
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */

 extern inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
 {
 	unsigned int mask, retval;
 	unsigned long flags;
 	unsigned int *adr = (unsigned int *)addr;

 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	cris_atomic_save(addr, flags);
 	retval = (mask & *adr) != 0;
 	*adr &= ~mask;
 	cris_atomic_restore(addr, flags);
 	return retval;
 }

 /**
  * __test_and_clear_bit - Clear a bit and return its old value
  * @nr: Bit to clear
  * @addr: Address to count from
  *
  * This operation is non-atomic and can be reordered.
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */

 extern inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
 {
 	unsigned int mask, retval;
 	unsigned int *adr = (unsigned int *)addr;

 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	retval = (mask & *adr) != 0;
 	*adr &= ~mask;
 	return retval;
 }
 /**
  * test_and_change_bit - Change a bit and return its old value
  * @nr: Bit to change
  * @addr: Address to count from
  *
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */

 extern inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 {
 	unsigned int mask, retval;
 	unsigned long flags;
 	unsigned int *adr = (unsigned int *)addr;
 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	cris_atomic_save(addr, flags);
 	retval = (mask & *adr) != 0;
 	*adr ^= mask;
 	cris_atomic_restore(addr, flags);
 	return retval;
 }

 /* WARNING: non atomic and it can be reordered! */

 extern inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
 {
 	unsigned int mask, retval;
 	unsigned int *adr = (unsigned int *)addr;

 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	retval = (mask & *adr) != 0;
 	*adr ^= mask;

 	return retval;
 }

 /**
  * test_bit - Determine whether a bit is set
  * @nr: bit number to test
  * @addr: Address to start counting from
  *
  * This routine doesn't need to be atomic.
  */

 extern inline int test_bit(int nr, const volatile unsigned long *addr)
 {
 	unsigned int mask;
 	unsigned int *adr = (unsigned int *)addr;

 	adr += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	return ((mask & *adr) != 0);
 }

 /*
  * Find-bit routines..
  */

 /*
  * Since we define it "external", it collides with the built-in
  * definition, which doesn't have the same semantics.  We don't want to
  * use -fno-builtin, so just hide the name ffs.
  */
 #define ffs kernel_ffs

 /*
  * fls: find last bit set.
  */

 #define fls(x) generic_fls(x)

 /*
  * hweightN - returns the hamming weight of a N-bit word
  * @x: the word to weigh
  *
  * The Hamming Weight of a number is the total number of bits set in it.
  */

 #define hweight32(x) generic_hweight32(x)
 #define hweight16(x) generic_hweight16(x)
 #define hweight8(x) generic_hweight8(x)

 /**
  * find_next_zero_bit - find the first zero bit in a memory region
  * @addr: The address to base the search on
  * @offset: The bitnumber to start searching at
  * @size: The maximum size to search
  */
 extern inline int find_next_zero_bit (const unsigned long * addr, int size, int offset)
 {
 	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
 	unsigned long result = offset & ~31UL;
 	unsigned long tmp;

 	if (offset >= size)
 		return size;
 	size -= result;
 	offset &= 31UL;
 	if (offset) {
 		tmp = *(p++);
 		tmp |= ~0UL >> (32-offset);
 		if (size < 32)
 			goto found_first;
 		if (~tmp)
 			goto found_middle;
 		size -= 32;
 		result += 32;
 	}
 	while (size & ~31UL) {
 		if (~(tmp = *(p++)))
 			goto found_middle;
 		result += 32;
 		size -= 32;
 	}
 	if (!size)
 		return result;
 	tmp = *p;

  found_first:
 	tmp |= ~0UL >> size;
  found_middle:
 	return result + ffz(tmp);
 }

 /**
  * find_next_bit - find the first set bit in a memory region
  * @addr: The address to base the search on
  * @offset: The bitnumber to start searching at
  * @size: The maximum size to search
  */
 static __inline__ int find_next_bit(const unsigned long *addr, int size, int offset)
 {
 	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
         unsigned long result = offset & ~31UL;
         unsigned long tmp;

         if (offset >= size)
                 return size;
         size -= result;
         offset &= 31UL;
         if (offset) {
                 tmp = *(p++);
                 tmp &= (~0UL << offset);
                 if (size < 32)
                         goto found_first;
                 if (tmp)
                         goto found_middle;
                 size -= 32;
                 result += 32;
         }
         while (size & ~31UL) {
                 if ((tmp = *(p++)))
                         goto found_middle;
                 result += 32;
                 size -= 32;
         }
         if (!size)
                 return result;
         tmp = *p;

 found_first:
         tmp &= (~0UL >> (32 - size));
         if (tmp == 0UL)        /* Are any bits set? */
                 return result + size; /* Nope. */
 found_middle:
         return result + __ffs(tmp);
 }

 /**
  * find_first_zero_bit - find the first zero bit in a memory region
  * @addr: The address to start the search at
  * @size: The maximum size to search
  *
  * Returns the bit-number of the first zero bit, not the number of the byte
  * containing a bit.
  */

 #define find_first_zero_bit(addr, size) \
         find_next_zero_bit((addr), (size), 0)
 #define find_first_bit(addr, size) \
         find_next_bit((addr), (size), 0)

 #define ext2_set_bit                 test_and_set_bit
 #define ext2_set_bit_atomic(l,n,a)   test_and_set_bit(n,a)
 #define ext2_clear_bit               test_and_clear_bit
 #define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
 #define ext2_test_bit                test_bit
 #define ext2_find_first_zero_bit     find_first_zero_bit
 #define ext2_find_next_zero_bit      find_next_zero_bit

 /* Bitmap functions for the minix filesystem.  */
 #define minix_set_bit(nr,addr) test_and_set_bit(nr,addr)
 #define minix_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
 #define minix_test_bit(nr,addr) test_bit(nr,addr)
 #define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)

 extern inline int sched_find_first_bit(const unsigned long *b)
 {
 	if (unlikely(b[0]))
 		return __ffs(b[0]);
 	if (unlikely(b[1]))
 		return __ffs(b[1]) + 32;
 	if (unlikely(b[2]))
 		return __ffs(b[2]) + 64;
 	if (unlikely(b[3]))
 		return __ffs(b[3]) + 96;
 	if (b[4])
 		return __ffs(b[4]) + 128;
 	return __ffs(b[5]) + 32 + 128;
 }

 #endif /* __KERNEL__ */

 #endif /* _CRIS_BITOPS_H */
	/* asm/bitops.h for Linux/CRIS
	*
	* TODO: asm versions if speed is needed
	*
	* All bit operations return 0 if the bit was cleared before the
	* operation and != 0 if it was not.
	*
	* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
	*/

	#ifndef _CRIS_BITOPS_H
	#define _CRIS_BITOPS_H

	/* Currently this is unsuitable for consumption outside the kernel. */
	#ifdef __KERNEL__

	#include <asm/arch/bitops.h>
	#include <asm/system.h>
	#include <asm/atomic.h>
	#include <linux/compiler.h>

	/*
	* Some hacks to defeat gcc over-optimizations..
	*/
	struct __dummy { unsigned long a[100]; };
	#define ADDR ((struct __dummy ) addr)
	#define CONST_ADDR ((const struct __dummy ) addr)

	/*
	* set_bit - Atomically set a bit in memory
	* @nr: the bit to set
	* @addr: the address to start counting from
	*
	* This function is atomic and may not be reordered. See __set_bit()
	* if you do not require the atomic guarantees.
	* Note that @nr may be almost arbitrarily large; this function is not
	* restricted to acting on a single-word quantity.
	*/

	#define set_bit(nr, addr) (void)test_and_set_bit(nr, addr)

	#define __set_bit(nr, addr) (void)__test_and_set_bit(nr, addr)

	/*
	* clear_bit - Clears a bit in memory
	* @nr: Bit to clear
	* @addr: Address to start counting from
	*
	* clear_bit() is atomic and may not be reordered. However, it does
	* not contain a memory barrier, so if it is used for locking purposes,
	* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
	* in order to ensure changes are visible on other processors.
	*/

	#define clear_bit(nr, addr) (void)test_and_clear_bit(nr, addr)

	#define __clear_bit(nr, addr) (void)__test_and_clear_bit(nr, addr)

	/*
	* change_bit - Toggle a bit in memory
	* @nr: Bit to change
	* @addr: Address to start counting from
	*
	* change_bit() is atomic and may not be reordered.
	* Note that @nr may be almost arbitrarily large; this function is not
	* restricted to acting on a single-word quantity.
	*/

	#define change_bit(nr, addr) (void)test_and_change_bit(nr, addr)

	/*
	* __change_bit - Toggle a bit in memory
	* @nr: the bit to change
	* @addr: the address to start counting from
	*
	* Unlike change_bit(), this function is non-atomic and may be reordered.
	* If it's called on the same region of memory simultaneously, the effect
	* may be that only one operation succeeds.
	*/

	#define __change_bit(nr, addr) (void)__test_and_change_bit(nr, addr)

	/**
	* test_and_set_bit - Set a bit and return its old value
	* @nr: Bit to set
	* @addr: Address to count from
	*
	* This operation is atomic and cannot be reordered.
	* It also implies a memory barrier.
	*/

	extern inline int test_and_set_bit(int nr, volatile unsigned long *addr)
	{
	unsigned int mask, retval;
	unsigned long flags;
	unsigned int adr = (unsigned int )addr;

	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	cris_atomic_save(addr, flags);
	retval = (mask & *adr) != 0;
	*adr \|= mask;
	cris_atomic_restore(addr, flags);
	local_irq_restore(flags);
	return retval;
	}

	extern inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
	{
	unsigned int mask, retval;
	unsigned int adr = (unsigned int )addr;

	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	retval = (mask & *adr) != 0;
	*adr \|= mask;
	return retval;
	}

	/*
	* clear_bit() doesn't provide any barrier for the compiler.
	*/
	#define smp_mb__before_clear_bit() barrier()
	#define smp_mb__after_clear_bit() barrier()

	/**
	* test_and_clear_bit - Clear a bit and return its old value
	* @nr: Bit to clear
	* @addr: Address to count from
	*
	* This operation is atomic and cannot be reordered.
	* It also implies a memory barrier.
	*/

	extern inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
	{
	unsigned int mask, retval;
	unsigned long flags;
	unsigned int adr = (unsigned int )addr;

	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	cris_atomic_save(addr, flags);
	retval = (mask & *adr) != 0;
	*adr &= ~mask;
	cris_atomic_restore(addr, flags);
	return retval;
	}

	/**
	* __test_and_clear_bit - Clear a bit and return its old value
	* @nr: Bit to clear
	* @addr: Address to count from
	*
	* This operation is non-atomic and can be reordered.
	* If two examples of this operation race, one can appear to succeed
	* but actually fail. You must protect multiple accesses with a lock.
	*/

	extern inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
	{
	unsigned int mask, retval;
	unsigned int adr = (unsigned int )addr;

	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	retval = (mask & *adr) != 0;
	*adr &= ~mask;
	return retval;
	}
	/**
	* test_and_change_bit - Change a bit and return its old value
	* @nr: Bit to change
	* @addr: Address to count from
	*
	* This operation is atomic and cannot be reordered.
	* It also implies a memory barrier.
	*/

	extern inline int test_and_change_bit(int nr, volatile unsigned long *addr)
	{
	unsigned int mask, retval;
	unsigned long flags;
	unsigned int adr = (unsigned int )addr;
	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	cris_atomic_save(addr, flags);
	retval = (mask & *adr) != 0;
	*adr ^= mask;
	cris_atomic_restore(addr, flags);
	return retval;
	}

	/* WARNING: non atomic and it can be reordered! */

	extern inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
	{
	unsigned int mask, retval;
	unsigned int adr = (unsigned int )addr;

	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	retval = (mask & *adr) != 0;
	*adr ^= mask;

	return retval;
	}

	/**
	* test_bit - Determine whether a bit is set
	* @nr: bit number to test
	* @addr: Address to start counting from
	*
	* This routine doesn't need to be atomic.
	*/

	extern inline int test_bit(int nr, const volatile unsigned long *addr)
	{
	unsigned int mask;
	unsigned int adr = (unsigned int )addr;

	adr += nr >> 5;
	mask = 1 << (nr & 0x1f);
	return ((mask & *adr) != 0);
	}

	/*
	* Find-bit routines..
	*/

	/*
	* Since we define it "external", it collides with the built-in
	* definition, which doesn't have the same semantics. We don't want to
	* use -fno-builtin, so just hide the name ffs.
	*/
	#define ffs kernel_ffs

	/*
	* fls: find last bit set.
	*/

	#define fls(x) generic_fls(x)

	/*
	* hweightN - returns the hamming weight of a N-bit word
	* @x: the word to weigh
	*
	* The Hamming Weight of a number is the total number of bits set in it.
	*/

	#define hweight32(x) generic_hweight32(x)
	#define hweight16(x) generic_hweight16(x)
	#define hweight8(x) generic_hweight8(x)

	/**
	* find_next_zero_bit - find the first zero bit in a memory region
	* @addr: The address to base the search on
	* @offset: The bitnumber to start searching at
	* @size: The maximum size to search
	*/
	extern inline int find_next_zero_bit (const unsigned long * addr, int size, int offset)
	{
	unsigned long p = ((unsigned long ) addr) + (offset >> 5);
	unsigned long result = offset & ~31UL;
	unsigned long tmp;

	if (offset >= size)
	return size;
	size -= result;
	offset &= 31UL;
	if (offset) {
	tmp = *(p++);
	tmp \|= ~0UL >> (32-offset);
	if (size < 32)
	goto found_first;
	if (~tmp)
	goto found_middle;
	size -= 32;
	result += 32;
	}
	while (size & ~31UL) {
	if (~(tmp = *(p++)))
	goto found_middle;
	result += 32;
	size -= 32;
	}
	if (!size)
	return result;
	tmp = *p;

	found_first:
	tmp \|= ~0UL >> size;
	found_middle:
	return result + ffz(tmp);
	}

	/**
	* find_next_bit - find the first set bit in a memory region
	* @addr: The address to base the search on
	* @offset: The bitnumber to start searching at
	* @size: The maximum size to search
	*/
	static __inline__ int find_next_bit(const unsigned long *addr, int size, int offset)
	{
	unsigned long p = ((unsigned long ) addr) + (offset >> 5);
	unsigned long result = offset & ~31UL;
	unsigned long tmp;

	if (offset >= size)
	return size;
	size -= result;
	offset &= 31UL;
	if (offset) {
	tmp = *(p++);
	tmp &= (~0UL << offset);
	if (size < 32)
	goto found_first;
	if (tmp)
	goto found_middle;
	size -= 32;
	result += 32;
	}
	while (size & ~31UL) {
	if ((tmp = *(p++)))
	goto found_middle;
	result += 32;
	size -= 32;
	}
	if (!size)
	return result;
	tmp = *p;

	found_first:
	tmp &= (~0UL >> (32 - size));
	if (tmp == 0UL) /* Are any bits set? */
	return result + size; /* Nope. */
	found_middle:
	return result + __ffs(tmp);
	}

	/**
	* find_first_zero_bit - find the first zero bit in a memory region
	* @addr: The address to start the search at
	* @size: The maximum size to search
	*
	* Returns the bit-number of the first zero bit, not the number of the byte
	* containing a bit.
	*/

	#define find_first_zero_bit(addr, size) \
	find_next_zero_bit((addr), (size), 0)
	#define find_first_bit(addr, size) \
	find_next_bit((addr), (size), 0)

	#define ext2_set_bit test_and_set_bit
	#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a)
	#define ext2_clear_bit test_and_clear_bit
	#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
	#define ext2_test_bit test_bit
	#define ext2_find_first_zero_bit find_first_zero_bit
	#define ext2_find_next_zero_bit find_next_zero_bit

	/* Bitmap functions for the minix filesystem. */
	#define minix_set_bit(nr,addr) test_and_set_bit(nr,addr)
	#define minix_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
	#define minix_test_bit(nr,addr) test_bit(nr,addr)
	#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)

	extern inline int sched_find_first_bit(const unsigned long *b)
	{
	if (unlikely(b[0]))
	return __ffs(b[0]);
	if (unlikely(b[1]))
	return __ffs(b[1]) + 32;
	if (unlikely(b[2]))
	return __ffs(b[2]) + 64;
	if (unlikely(b[3]))
	return __ffs(b[3]) + 96;
	if (b[4])
	return __ffs(b[4]) + 128;
	return __ffs(b[5]) + 32 + 128;
	}

	#endif /* __KERNEL__ */

	#endif /* _CRIS_BITOPS_H */