| /* |
| * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer |
| * |
| * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net> |
| * |
| * This file is subject to the terms and conditions of version 2 of |
| * the GNU General Public License. See the file COPYING in the main |
| * directory of this archive for more details. |
| * |
| * 7-bit I2C slave address 0x1c/0x1d (pin selectable) |
| * |
| * TODO: orientation / freefall events, autosleep |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/events.h> |
| #include <linux/delay.h> |
| |
| #define MMA8452_STATUS 0x00 |
| #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0)) |
| #define MMA8452_OUT_X 0x01 /* MSB first, 12-bit */ |
| #define MMA8452_OUT_Y 0x03 |
| #define MMA8452_OUT_Z 0x05 |
| #define MMA8452_INT_SRC 0x0c |
| #define MMA8452_WHO_AM_I 0x0d |
| #define MMA8452_DATA_CFG 0x0e |
| #define MMA8452_DATA_CFG_FS_MASK GENMASK(1, 0) |
| #define MMA8452_DATA_CFG_FS_2G 0 |
| #define MMA8452_DATA_CFG_FS_4G 1 |
| #define MMA8452_DATA_CFG_FS_8G 2 |
| #define MMA8452_DATA_CFG_HPF_MASK BIT(4) |
| #define MMA8452_HP_FILTER_CUTOFF 0x0f |
| #define MMA8452_HP_FILTER_CUTOFF_SEL_MASK GENMASK(1, 0) |
| #define MMA8452_TRANSIENT_CFG 0x1d |
| #define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0) |
| #define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1) |
| #define MMA8452_TRANSIENT_CFG_ELE BIT(4) |
| #define MMA8452_TRANSIENT_SRC 0x1e |
| #define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1) |
| #define MMA8452_TRANSIENT_SRC_YTRANSE BIT(3) |
| #define MMA8452_TRANSIENT_SRC_ZTRANSE BIT(5) |
| #define MMA8452_TRANSIENT_THS 0x1f |
| #define MMA8452_TRANSIENT_THS_MASK GENMASK(6, 0) |
| #define MMA8452_TRANSIENT_COUNT 0x20 |
| #define MMA8452_CTRL_REG1 0x2a |
| #define MMA8452_CTRL_ACTIVE BIT(0) |
| #define MMA8452_CTRL_DR_MASK GENMASK(5, 3) |
| #define MMA8452_CTRL_DR_SHIFT 3 |
| #define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */ |
| #define MMA8452_CTRL_REG2 0x2b |
| #define MMA8452_CTRL_REG2_RST BIT(6) |
| #define MMA8452_CTRL_REG4 0x2d |
| #define MMA8452_CTRL_REG5 0x2e |
| #define MMA8452_OFF_X 0x2f |
| #define MMA8452_OFF_Y 0x30 |
| #define MMA8452_OFF_Z 0x31 |
| |
| #define MMA8452_MAX_REG 0x31 |
| |
| #define MMA8452_INT_DRDY BIT(0) |
| #define MMA8452_INT_TRANS BIT(5) |
| |
| #define MMA8452_DEVICE_ID 0x2a |
| |
| struct mma8452_data { |
| struct i2c_client *client; |
| struct mutex lock; |
| u8 ctrl_reg1; |
| u8 data_cfg; |
| }; |
| |
| static int mma8452_drdy(struct mma8452_data *data) |
| { |
| int tries = 150; |
| |
| while (tries-- > 0) { |
| int ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_STATUS); |
| if (ret < 0) |
| return ret; |
| if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY) |
| return 0; |
| msleep(20); |
| } |
| |
| dev_err(&data->client->dev, "data not ready\n"); |
| return -EIO; |
| } |
| |
| static int mma8452_read(struct mma8452_data *data, __be16 buf[3]) |
| { |
| int ret = mma8452_drdy(data); |
| if (ret < 0) |
| return ret; |
| return i2c_smbus_read_i2c_block_data(data->client, |
| MMA8452_OUT_X, 3 * sizeof(__be16), (u8 *) buf); |
| } |
| |
| static ssize_t mma8452_show_int_plus_micros(char *buf, |
| const int (*vals)[2], int n) |
| { |
| size_t len = 0; |
| |
| while (n-- > 0) |
| len += scnprintf(buf + len, PAGE_SIZE - len, |
| "%d.%06d ", vals[n][0], vals[n][1]); |
| |
| /* replace trailing space by newline */ |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n, |
| int val, int val2) |
| { |
| while (n-- > 0) |
| if (val == vals[n][0] && val2 == vals[n][1]) |
| return n; |
| |
| return -EINVAL; |
| } |
| |
| static int mma8452_get_odr_index(struct mma8452_data *data) |
| { |
| return (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >> |
| MMA8452_CTRL_DR_SHIFT; |
| } |
| |
| static const int mma8452_samp_freq[8][2] = { |
| {800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000}, |
| {6, 250000}, {1, 560000} |
| }; |
| |
| /* |
| * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048 |
| * The userspace interface uses m/s^2 and we declare micro units |
| * So scale factor is given by: |
| * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 |
| */ |
| static const int mma8452_scales[3][2] = { |
| {0, 9577}, {0, 19154}, {0, 38307} |
| }; |
| |
| /* Datasheet table 35 (step time vs sample frequency) */ |
| static const int mma8452_transient_time_step_us[8] = { |
| 1250, |
| 2500, |
| 5000, |
| 10000, |
| 20000, |
| 20000, |
| 20000, |
| 20000 |
| }; |
| |
| /* Datasheet table 18 (normal mode) */ |
| static const int mma8452_hp_filter_cutoff[8][4][2] = { |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 800 Hz sample */ |
| { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 400 Hz sample */ |
| { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, /* 200 Hz sample */ |
| { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, /* 100 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 50 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 12.5 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 6.25 Hz sample */ |
| { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} } /* 1.56 Hz sample */ |
| }; |
| |
| static ssize_t mma8452_show_samp_freq_avail(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return mma8452_show_int_plus_micros(buf, mma8452_samp_freq, |
| ARRAY_SIZE(mma8452_samp_freq)); |
| } |
| |
| static ssize_t mma8452_show_scale_avail(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return mma8452_show_int_plus_micros(buf, mma8452_scales, |
| ARRAY_SIZE(mma8452_scales)); |
| } |
| |
| static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int i = mma8452_get_odr_index(data); |
| |
| return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[i], |
| ARRAY_SIZE(mma8452_hp_filter_cutoff[0])); |
| } |
| |
| static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail); |
| static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO, |
| mma8452_show_scale_avail, NULL, 0); |
| static IIO_DEVICE_ATTR(in_accel_filter_high_pass_3db_frequency_available, |
| S_IRUGO, mma8452_show_hp_cutoff_avail, NULL, 0); |
| |
| static int mma8452_get_samp_freq_index(struct mma8452_data *data, |
| int val, int val2) |
| { |
| return mma8452_get_int_plus_micros_index(mma8452_samp_freq, |
| ARRAY_SIZE(mma8452_samp_freq), val, val2); |
| } |
| |
| static int mma8452_get_scale_index(struct mma8452_data *data, |
| int val, int val2) |
| { |
| return mma8452_get_int_plus_micros_index(mma8452_scales, |
| ARRAY_SIZE(mma8452_scales), val, val2); |
| } |
| |
| static int mma8452_get_hp_filter_index(struct mma8452_data *data, |
| int val, int val2) |
| { |
| int i = mma8452_get_odr_index(data); |
| |
| return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[i], |
| ARRAY_SIZE(mma8452_hp_filter_cutoff[0]), val, val2); |
| } |
| |
| static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz) |
| { |
| int i, ret; |
| |
| ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF); |
| if (ret < 0) |
| return ret; |
| |
| i = mma8452_get_odr_index(data); |
| ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK; |
| *hz = mma8452_hp_filter_cutoff[i][ret][0]; |
| *uHz = mma8452_hp_filter_cutoff[i][ret][1]; |
| |
| return 0; |
| } |
| |
| static int mma8452_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| __be16 buffer[3]; |
| int i, ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| if (iio_buffer_enabled(indio_dev)) |
| return -EBUSY; |
| |
| mutex_lock(&data->lock); |
| ret = mma8452_read(data, buffer); |
| mutex_unlock(&data->lock); |
| if (ret < 0) |
| return ret; |
| *val = sign_extend32( |
| be16_to_cpu(buffer[chan->scan_index]) >> 4, 11); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK; |
| *val = mma8452_scales[i][0]; |
| *val2 = mma8452_scales[i][1]; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| i = mma8452_get_odr_index(data); |
| *val = mma8452_samp_freq[i][0]; |
| *val2 = mma8452_samp_freq[i][1]; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| ret = i2c_smbus_read_byte_data(data->client, MMA8452_OFF_X + |
| chan->scan_index); |
| if (ret < 0) |
| return ret; |
| *val = sign_extend32(ret, 7); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: |
| if (data->data_cfg & MMA8452_DATA_CFG_HPF_MASK) { |
| ret = mma8452_read_hp_filter(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } else { |
| *val = 0; |
| *val2 = 0; |
| } |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| return -EINVAL; |
| } |
| |
| static int mma8452_standby(struct mma8452_data *data) |
| { |
| return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1, |
| data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE); |
| } |
| |
| static int mma8452_active(struct mma8452_data *data) |
| { |
| return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1, |
| data->ctrl_reg1); |
| } |
| |
| static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&data->lock); |
| |
| /* config can only be changed when in standby */ |
| ret = mma8452_standby(data); |
| if (ret < 0) |
| goto fail; |
| |
| ret = i2c_smbus_write_byte_data(data->client, reg, val); |
| if (ret < 0) |
| goto fail; |
| |
| ret = mma8452_active(data); |
| if (ret < 0) |
| goto fail; |
| |
| ret = 0; |
| fail: |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, |
| int val, int val2) |
| { |
| int i, reg; |
| |
| i = mma8452_get_hp_filter_index(data, val, val2); |
| if (i < 0) |
| return i; |
| |
| reg = i2c_smbus_read_byte_data(data->client, |
| MMA8452_HP_FILTER_CUTOFF); |
| if (reg < 0) |
| return reg; |
| reg &= ~MMA8452_HP_FILTER_CUTOFF_SEL_MASK; |
| reg |= i; |
| |
| return mma8452_change_config(data, MMA8452_HP_FILTER_CUTOFF, reg); |
| } |
| |
| static int mma8452_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int i, ret; |
| |
| if (iio_buffer_enabled(indio_dev)) |
| return -EBUSY; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| i = mma8452_get_samp_freq_index(data, val, val2); |
| if (i < 0) |
| return i; |
| |
| data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK; |
| data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT; |
| return mma8452_change_config(data, MMA8452_CTRL_REG1, |
| data->ctrl_reg1); |
| case IIO_CHAN_INFO_SCALE: |
| i = mma8452_get_scale_index(data, val, val2); |
| if (i < 0) |
| return i; |
| data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK; |
| data->data_cfg |= i; |
| return mma8452_change_config(data, MMA8452_DATA_CFG, |
| data->data_cfg); |
| case IIO_CHAN_INFO_CALIBBIAS: |
| if (val < -128 || val > 127) |
| return -EINVAL; |
| return mma8452_change_config(data, MMA8452_OFF_X + |
| chan->scan_index, val); |
| |
| case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: |
| if (val == 0 && val2 == 0) { |
| data->data_cfg &= ~MMA8452_DATA_CFG_HPF_MASK; |
| } else { |
| data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK; |
| ret = mma8452_set_hp_filter_frequency(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } |
| return mma8452_change_config(data, MMA8452_DATA_CFG, |
| data->data_cfg); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_read_thresh(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret, us; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_TRANSIENT_THS); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret & MMA8452_TRANSIENT_THS_MASK; |
| return IIO_VAL_INT; |
| |
| case IIO_EV_INFO_PERIOD: |
| ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_TRANSIENT_COUNT); |
| if (ret < 0) |
| return ret; |
| |
| us = ret * mma8452_transient_time_step_us[ |
| mma8452_get_odr_index(data)]; |
| *val = us / USEC_PER_SEC; |
| *val2 = us % USEC_PER_SEC; |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: |
| ret = i2c_smbus_read_byte_data(data->client, |
| MMA8452_TRANSIENT_CFG); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & MMA8452_TRANSIENT_CFG_HPF_BYP) { |
| *val = 0; |
| *val2 = 0; |
| } else { |
| ret = mma8452_read_hp_filter(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_write_thresh(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret, reg, steps; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| if (val < 0 || val > MMA8452_TRANSIENT_THS_MASK) |
| return -EINVAL; |
| |
| return mma8452_change_config(data, MMA8452_TRANSIENT_THS, val); |
| |
| case IIO_EV_INFO_PERIOD: |
| steps = (val * USEC_PER_SEC + val2) / |
| mma8452_transient_time_step_us[ |
| mma8452_get_odr_index(data)]; |
| |
| if (steps < 0 || steps > 0xff) |
| return -EINVAL; |
| |
| return mma8452_change_config(data, MMA8452_TRANSIENT_COUNT, |
| steps); |
| case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: |
| reg = i2c_smbus_read_byte_data(data->client, |
| MMA8452_TRANSIENT_CFG); |
| if (reg < 0) |
| return reg; |
| |
| if (val == 0 && val2 == 0) { |
| reg |= MMA8452_TRANSIENT_CFG_HPF_BYP; |
| } else { |
| reg &= ~MMA8452_TRANSIENT_CFG_HPF_BYP; |
| ret = mma8452_set_hp_filter_frequency(data, val, val2); |
| if (ret < 0) |
| return ret; |
| } |
| return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, reg); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma8452_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG); |
| if (ret < 0) |
| return ret; |
| |
| return ret & MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index) ? 1 : 0; |
| } |
| |
| static int mma8452_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| int state) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int val; |
| |
| val = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG); |
| if (val < 0) |
| return val; |
| |
| if (state) |
| val |= MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index); |
| else |
| val &= ~MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index); |
| |
| val |= MMA8452_TRANSIENT_CFG_ELE; |
| |
| return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, val); |
| } |
| |
| static void mma8452_transient_interrupt(struct iio_dev *indio_dev) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| s64 ts = iio_get_time_ns(); |
| int src; |
| |
| src = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_SRC); |
| if (src < 0) |
| return; |
| |
| if (src & MMA8452_TRANSIENT_SRC_XTRANSE) |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_RISING), |
| ts); |
| |
| if (src & MMA8452_TRANSIENT_SRC_YTRANSE) |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_RISING), |
| ts); |
| |
| if (src & MMA8452_TRANSIENT_SRC_ZTRANSE) |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_RISING), |
| ts); |
| } |
| |
| static irqreturn_t mma8452_interrupt(int irq, void *p) |
| { |
| struct iio_dev *indio_dev = p; |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int ret = IRQ_NONE; |
| int src; |
| |
| src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC); |
| if (src < 0) |
| return IRQ_NONE; |
| |
| if (src & MMA8452_INT_DRDY) { |
| iio_trigger_poll_chained(indio_dev->trig); |
| ret = IRQ_HANDLED; |
| } |
| |
| if (src & MMA8452_INT_TRANS) { |
| mma8452_transient_interrupt(indio_dev); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t mma8452_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct mma8452_data *data = iio_priv(indio_dev); |
| u8 buffer[16]; /* 3 16-bit channels + padding + ts */ |
| int ret; |
| |
| ret = mma8452_read(data, (__be16 *) buffer); |
| if (ret < 0) |
| goto done; |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, buffer, |
| iio_get_time_ns()); |
| |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| return IRQ_HANDLED; |
| } |
| |
| static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, |
| unsigned reg, unsigned writeval, |
| unsigned *readval) |
| { |
| int ret; |
| struct mma8452_data *data = iio_priv(indio_dev); |
| |
| if (reg > MMA8452_MAX_REG) |
| return -EINVAL; |
| |
| if (!readval) |
| return mma8452_change_config(data, reg, writeval); |
| |
| ret = i2c_smbus_read_byte_data(data->client, reg); |
| if (ret < 0) |
| return ret; |
| |
| *readval = ret; |
| |
| return 0; |
| } |
| |
| static const struct iio_event_spec mma8452_transient_event[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD) | |
| BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) |
| }, |
| }; |
| |
| /* |
| * Threshold is configured in fixed 8G/127 steps regardless of |
| * currently selected scale for measurement. |
| */ |
| static IIO_CONST_ATTR_NAMED(accel_transient_scale, in_accel_scale, "0.617742"); |
| |
| static struct attribute *mma8452_event_attributes[] = { |
| &iio_const_attr_accel_transient_scale.dev_attr.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group mma8452_event_attribute_group = { |
| .attrs = mma8452_event_attributes, |
| .name = "events", |
| }; |
| |
| #define MMA8452_CHANNEL(axis, idx) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_CALIBBIAS), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| .event_spec = mma8452_transient_event, \ |
| .num_event_specs = ARRAY_SIZE(mma8452_transient_event), \ |
| } |
| |
| static const struct iio_chan_spec mma8452_channels[] = { |
| MMA8452_CHANNEL(X, 0), |
| MMA8452_CHANNEL(Y, 1), |
| MMA8452_CHANNEL(Z, 2), |
| IIO_CHAN_SOFT_TIMESTAMP(3), |
| }; |
| |
| static struct attribute *mma8452_attributes[] = { |
| &iio_dev_attr_sampling_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_filter_high_pass_3db_frequency_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group mma8452_group = { |
| .attrs = mma8452_attributes, |
| }; |
| |
| static const struct iio_info mma8452_info = { |
| .attrs = &mma8452_group, |
| .read_raw = &mma8452_read_raw, |
| .write_raw = &mma8452_write_raw, |
| .event_attrs = &mma8452_event_attribute_group, |
| .read_event_value = &mma8452_read_thresh, |
| .write_event_value = &mma8452_write_thresh, |
| .read_event_config = &mma8452_read_event_config, |
| .write_event_config = &mma8452_write_event_config, |
| .debugfs_reg_access = &mma8452_reg_access_dbg, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static const unsigned long mma8452_scan_masks[] = {0x7, 0}; |
| |
| static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig, |
| bool state) |
| { |
| struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); |
| struct mma8452_data *data = iio_priv(indio_dev); |
| int reg; |
| |
| reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4); |
| if (reg < 0) |
| return reg; |
| |
| if (state) |
| reg |= MMA8452_INT_DRDY; |
| else |
| reg &= ~MMA8452_INT_DRDY; |
| |
| return mma8452_change_config(data, MMA8452_CTRL_REG4, reg); |
| } |
| |
| static int mma8452_validate_device(struct iio_trigger *trig, |
| struct iio_dev *indio_dev) |
| { |
| struct iio_dev *indio = iio_trigger_get_drvdata(trig); |
| |
| if (indio != indio_dev) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static const struct iio_trigger_ops mma8452_trigger_ops = { |
| .set_trigger_state = mma8452_data_rdy_trigger_set_state, |
| .validate_device = mma8452_validate_device, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int mma8452_trigger_setup(struct iio_dev *indio_dev) |
| { |
| struct mma8452_data *data = iio_priv(indio_dev); |
| struct iio_trigger *trig; |
| int ret; |
| |
| trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d", |
| indio_dev->name, |
| indio_dev->id); |
| if (!trig) |
| return -ENOMEM; |
| |
| trig->dev.parent = &data->client->dev; |
| trig->ops = &mma8452_trigger_ops; |
| iio_trigger_set_drvdata(trig, indio_dev); |
| |
| ret = iio_trigger_register(trig); |
| if (ret) |
| return ret; |
| |
| indio_dev->trig = trig; |
| return 0; |
| } |
| |
| static void mma8452_trigger_cleanup(struct iio_dev *indio_dev) |
| { |
| if (indio_dev->trig) |
| iio_trigger_unregister(indio_dev->trig); |
| } |
| |
| static int mma8452_reset(struct i2c_client *client) |
| { |
| int i; |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2, |
| MMA8452_CTRL_REG2_RST); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < 10; i++) { |
| usleep_range(100, 200); |
| ret = i2c_smbus_read_byte_data(client, MMA8452_CTRL_REG2); |
| if (ret == -EIO) |
| continue; /* I2C comm reset */ |
| if (ret < 0) |
| return ret; |
| if (!(ret & MMA8452_CTRL_REG2_RST)) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int mma8452_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct mma8452_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I); |
| if (ret < 0) |
| return ret; |
| if (ret != MMA8452_DEVICE_ID) |
| return -ENODEV; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| data->client = client; |
| mutex_init(&data->lock); |
| |
| i2c_set_clientdata(client, indio_dev); |
| indio_dev->info = &mma8452_info; |
| indio_dev->name = id->name; |
| indio_dev->dev.parent = &client->dev; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = mma8452_channels; |
| indio_dev->num_channels = ARRAY_SIZE(mma8452_channels); |
| indio_dev->available_scan_masks = mma8452_scan_masks; |
| |
| ret = mma8452_reset(client); |
| if (ret < 0) |
| return ret; |
| |
| data->data_cfg = MMA8452_DATA_CFG_FS_2G; |
| ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG, |
| data->data_cfg); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * By default set transient threshold to max to avoid events if |
| * enabling without configuring threshold. |
| */ |
| ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS, |
| MMA8452_TRANSIENT_THS_MASK); |
| if (ret < 0) |
| return ret; |
| |
| if (client->irq) { |
| /* |
| * Although we enable the transient interrupt source once and |
| * for all here the transient event detection itself is not |
| * enabled until userspace asks for it by |
| * mma8452_write_event_config() |
| */ |
| int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS; |
| int enabled_interrupts = MMA8452_INT_TRANS; |
| |
| /* Assume wired to INT1 pin */ |
| ret = i2c_smbus_write_byte_data(client, |
| MMA8452_CTRL_REG5, |
| supported_interrupts); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(client, |
| MMA8452_CTRL_REG4, |
| enabled_interrupts); |
| if (ret < 0) |
| return ret; |
| |
| ret = mma8452_trigger_setup(indio_dev); |
| if (ret < 0) |
| return ret; |
| } |
| |
| data->ctrl_reg1 = MMA8452_CTRL_ACTIVE | |
| (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT); |
| ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1, |
| data->ctrl_reg1); |
| if (ret < 0) |
| goto trigger_cleanup; |
| |
| ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| mma8452_trigger_handler, NULL); |
| if (ret < 0) |
| goto trigger_cleanup; |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(&client->dev, |
| client->irq, |
| NULL, mma8452_interrupt, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| client->name, indio_dev); |
| if (ret) |
| goto buffer_cleanup; |
| } |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) |
| goto buffer_cleanup; |
| |
| return 0; |
| |
| buffer_cleanup: |
| iio_triggered_buffer_cleanup(indio_dev); |
| |
| trigger_cleanup: |
| mma8452_trigger_cleanup(indio_dev); |
| |
| return ret; |
| } |
| |
| static int mma8452_remove(struct i2c_client *client) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| |
| iio_device_unregister(indio_dev); |
| iio_triggered_buffer_cleanup(indio_dev); |
| mma8452_trigger_cleanup(indio_dev); |
| mma8452_standby(iio_priv(indio_dev)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mma8452_suspend(struct device *dev) |
| { |
| return mma8452_standby(iio_priv(i2c_get_clientdata( |
| to_i2c_client(dev)))); |
| } |
| |
| static int mma8452_resume(struct device *dev) |
| { |
| return mma8452_active(iio_priv(i2c_get_clientdata( |
| to_i2c_client(dev)))); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume); |
| #define MMA8452_PM_OPS (&mma8452_pm_ops) |
| #else |
| #define MMA8452_PM_OPS NULL |
| #endif |
| |
| static const struct i2c_device_id mma8452_id[] = { |
| { "mma8452", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mma8452_id); |
| |
| static const struct of_device_id mma8452_dt_ids[] = { |
| { .compatible = "fsl,mma8452" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mma8452_dt_ids); |
| |
| static struct i2c_driver mma8452_driver = { |
| .driver = { |
| .name = "mma8452", |
| .of_match_table = of_match_ptr(mma8452_dt_ids), |
| .pm = MMA8452_PM_OPS, |
| }, |
| .probe = mma8452_probe, |
| .remove = mma8452_remove, |
| .id_table = mma8452_id, |
| }; |
| module_i2c_driver(mma8452_driver); |
| |
| MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); |
| MODULE_DESCRIPTION("Freescale MMA8452 accelerometer driver"); |
| MODULE_LICENSE("GPL"); |