| /* |
| * Copyright 2003 Digi International (www.digi.com) |
| * Scott H Kilau <Scott_Kilau at digi dot com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the |
| * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR |
| * PURPOSE. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!! |
| * |
| ************************************************************************* |
| * |
| * Driver includes |
| * |
| *************************************************************************/ |
| |
| #ifndef __DGNC_DRIVER_H |
| #define __DGNC_DRIVER_H |
| |
| #include <linux/types.h> /* To pick up the varions Linux types */ |
| #include <linux/tty.h> /* To pick up the various tty structs/defines */ |
| #include <linux/interrupt.h> /* For irqreturn_t type */ |
| |
| #include "dgnc_types.h" /* Additional types needed by the Digi header files */ |
| #include "digi.h" /* Digi specific ioctl header */ |
| #include "dgnc_kcompat.h" /* Kernel 2.4/2.6 compat includes */ |
| #include "dgnc_sysfs.h" /* Support for SYSFS */ |
| |
| /************************************************************************* |
| * |
| * Driver defines |
| * |
| *************************************************************************/ |
| |
| /* |
| * Driver identification, error and debugging statments |
| * |
| * In theory, you can change all occurances of "digi" in the next |
| * three lines, and the driver printk's will all automagically change. |
| * |
| * APR((fmt, args, ...)); Always prints message |
| * DPR((fmt, args, ...)); Only prints if DGNC_TRACER is defined at |
| * compile time and dgnc_debug!=0 |
| */ |
| #define PROCSTR "dgnc" /* /proc entries */ |
| #define DEVSTR "/dev/dg/dgnc" /* /dev entries */ |
| #define DRVSTR "dgnc" /* Driver name string |
| * displayed by APR */ |
| #define APR(args) do { PRINTF_TO_KMEM(args); printk(DRVSTR": "); printk args; \ |
| } while (0) |
| #define RAPR(args) do { PRINTF_TO_KMEM(args); printk args; } while (0) |
| |
| #define TRC_TO_CONSOLE 1 |
| |
| /* |
| * Debugging levels can be set using debug insmod variable |
| * They can also be compiled out completely. |
| */ |
| |
| #define DBG_INIT (dgnc_debug & 0x01) |
| #define DBG_BASIC (dgnc_debug & 0x02) |
| #define DBG_CORE (dgnc_debug & 0x04) |
| |
| #define DBG_OPEN (dgnc_debug & 0x08) |
| #define DBG_CLOSE (dgnc_debug & 0x10) |
| #define DBG_READ (dgnc_debug & 0x20) |
| #define DBG_WRITE (dgnc_debug & 0x40) |
| |
| #define DBG_IOCTL (dgnc_debug & 0x80) |
| |
| #define DBG_PROC (dgnc_debug & 0x100) |
| #define DBG_PARAM (dgnc_debug & 0x200) |
| #define DBG_PSCAN (dgnc_debug & 0x400) |
| #define DBG_EVENT (dgnc_debug & 0x800) |
| |
| #define DBG_DRAIN (dgnc_debug & 0x1000) |
| #define DBG_MSIGS (dgnc_debug & 0x2000) |
| |
| #define DBG_MGMT (dgnc_debug & 0x4000) |
| #define DBG_INTR (dgnc_debug & 0x8000) |
| |
| #define DBG_CARR (dgnc_debug & 0x10000) |
| |
| |
| #if defined(DGNC_TRACER) |
| |
| # if defined(TRC_TO_KMEM) |
| /* Choose one: */ |
| # define TRC_ON_OVERFLOW_WRAP_AROUND |
| # undef TRC_ON_OVERFLOW_SHIFT_BUFFER |
| # endif //TRC_TO_KMEM |
| |
| # define TRC_MAXMSG 1024 |
| # define TRC_OVERFLOW "(OVERFLOW)" |
| # define TRC_DTRC "/usr/bin/dtrc" |
| |
| #if defined TRC_TO_CONSOLE |
| #define PRINTF_TO_CONSOLE(args) { printk(DRVSTR": "); printk args; } |
| #else //!defined TRACE_TO_CONSOLE |
| #define PRINTF_TO_CONSOLE(args) |
| #endif |
| |
| #if defined TRC_TO_KMEM |
| #define PRINTF_TO_KMEM(args) dgnc_tracef args |
| #else //!defined TRC_TO_KMEM |
| #define PRINTF_TO_KMEM(args) |
| #endif |
| |
| #define TRC(args) { PRINTF_TO_KMEM(args); PRINTF_TO_CONSOLE(args) } |
| |
| # define DPR_INIT(ARGS) if (DBG_INIT) TRC(ARGS) |
| # define DPR_BASIC(ARGS) if (DBG_BASIC) TRC(ARGS) |
| # define DPR_CORE(ARGS) if (DBG_CORE) TRC(ARGS) |
| # define DPR_OPEN(ARGS) if (DBG_OPEN) TRC(ARGS) |
| # define DPR_CLOSE(ARGS) if (DBG_CLOSE) TRC(ARGS) |
| # define DPR_READ(ARGS) if (DBG_READ) TRC(ARGS) |
| # define DPR_WRITE(ARGS) if (DBG_WRITE) TRC(ARGS) |
| # define DPR_IOCTL(ARGS) if (DBG_IOCTL) TRC(ARGS) |
| # define DPR_PROC(ARGS) if (DBG_PROC) TRC(ARGS) |
| # define DPR_PARAM(ARGS) if (DBG_PARAM) TRC(ARGS) |
| # define DPR_PSCAN(ARGS) if (DBG_PSCAN) TRC(ARGS) |
| # define DPR_EVENT(ARGS) if (DBG_EVENT) TRC(ARGS) |
| # define DPR_DRAIN(ARGS) if (DBG_DRAIN) TRC(ARGS) |
| # define DPR_CARR(ARGS) if (DBG_CARR) TRC(ARGS) |
| # define DPR_MGMT(ARGS) if (DBG_MGMT) TRC(ARGS) |
| # define DPR_INTR(ARGS) if (DBG_INTR) TRC(ARGS) |
| # define DPR_MSIGS(ARGS) if (DBG_MSIGS) TRC(ARGS) |
| |
| # define DPR(ARGS) if (dgnc_debug) TRC(ARGS) |
| # define P(X) dgnc_tracef(#X "=%p\n", X) |
| # define X(X) dgnc_tracef(#X "=%x\n", X) |
| |
| #else//!defined DGNC_TRACER |
| |
| #define PRINTF_TO_KMEM(args) |
| # define TRC(ARGS) |
| # define DPR_INIT(ARGS) |
| # define DPR_BASIC(ARGS) |
| # define DPR_CORE(ARGS) |
| # define DPR_OPEN(ARGS) |
| # define DPR_CLOSE(ARGS) |
| # define DPR_READ(ARGS) |
| # define DPR_WRITE(ARGS) |
| # define DPR_IOCTL(ARGS) |
| # define DPR_PROC(ARGS) |
| # define DPR_PARAM(ARGS) |
| # define DPR_PSCAN(ARGS) |
| # define DPR_EVENT(ARGS) |
| # define DPR_DRAIN(ARGS) |
| # define DPR_CARR(ARGS) |
| # define DPR_MGMT(ARGS) |
| # define DPR_INTR(ARGS) |
| # define DPR_MSIGS(ARGS) |
| |
| # define DPR(args) |
| |
| #endif//DGNC_TRACER |
| |
| /* Number of boards we support at once. */ |
| #define MAXBOARDS 20 |
| #define MAXPORTS 8 |
| #define MAXTTYNAMELEN 200 |
| |
| /* Our 3 magic numbers for our board, channel and unit structs */ |
| #define DGNC_BOARD_MAGIC 0x5c6df104 |
| #define DGNC_CHANNEL_MAGIC 0x6c6df104 |
| #define DGNC_UNIT_MAGIC 0x7c6df104 |
| |
| /* Serial port types */ |
| #define DGNC_SERIAL 0 |
| #define DGNC_PRINT 1 |
| |
| #define SERIAL_TYPE_NORMAL 1 |
| |
| #define PORT_NUM(dev) ((dev) & 0x7f) |
| #define IS_PRINT(dev) (((dev) & 0xff) >= 0x80) |
| |
| /* MAX number of stop characters we will send when our read queue is getting full */ |
| #define MAX_STOPS_SENT 5 |
| |
| /* 4 extra for alignment play space */ |
| #define WRITEBUFLEN ((4096) + 4) |
| #define MYFLIPLEN N_TTY_BUF_SIZE |
| |
| #define dgnc_jiffies_from_ms(a) (((a) * HZ) / 1000) |
| |
| /* |
| * Define a local default termios struct. All ports will be created |
| * with this termios initially. This is the same structure that is defined |
| * as the default in tty_io.c with the same settings overriden as in serial.c |
| * |
| * In short, this should match the internal serial ports' defaults. |
| */ |
| #define DEFAULT_IFLAGS (ICRNL | IXON) |
| #define DEFAULT_OFLAGS (OPOST | ONLCR) |
| #define DEFAULT_CFLAGS (B9600 | CS8 | CREAD | HUPCL | CLOCAL) |
| #define DEFAULT_LFLAGS (ISIG | ICANON | ECHO | ECHOE | ECHOK | \ |
| ECHOCTL | ECHOKE | IEXTEN) |
| |
| #ifndef _POSIX_VDISABLE |
| #define _POSIX_VDISABLE '\0' |
| #endif |
| |
| #define SNIFF_MAX 65536 /* Sniff buffer size (2^n) */ |
| #define SNIFF_MASK (SNIFF_MAX - 1) /* Sniff wrap mask */ |
| |
| /* |
| * Lock function/defines. |
| * Makes spotting lock/unlock locations easier. |
| */ |
| # define DGNC_SPINLOCK_INIT(x) spin_lock_init(&(x)) |
| # define DGNC_LOCK(x,y) spin_lock_irqsave(&(x), y) |
| # define DGNC_UNLOCK(x,y) spin_unlock_irqrestore(&(x), y) |
| |
| /* |
| * All the possible states the driver can be while being loaded. |
| */ |
| enum { |
| DRIVER_INITIALIZED = 0, |
| DRIVER_READY |
| }; |
| |
| /* |
| * All the possible states the board can be while booting up. |
| */ |
| enum { |
| BOARD_FAILED = 0, |
| BOARD_FOUND, |
| BOARD_READY |
| }; |
| |
| |
| /************************************************************************* |
| * |
| * Structures and closely related defines. |
| * |
| *************************************************************************/ |
| |
| struct board_t; |
| struct channel_t; |
| |
| /************************************************************************ |
| * Per board operations structure * |
| ************************************************************************/ |
| struct board_ops { |
| void (*tasklet) (unsigned long data); |
| irqreturn_t (*intr) (int irq, void *voidbrd); |
| void (*uart_init) (struct channel_t *ch); |
| void (*uart_off) (struct channel_t *ch); |
| int (*drain) (struct tty_struct *tty, uint seconds); |
| void (*param) (struct tty_struct *tty); |
| void (*vpd) (struct board_t *brd); |
| void (*assert_modem_signals) (struct channel_t *ch); |
| void (*flush_uart_write) (struct channel_t *ch); |
| void (*flush_uart_read) (struct channel_t *ch); |
| void (*disable_receiver) (struct channel_t *ch); |
| void (*enable_receiver) (struct channel_t *ch); |
| void (*send_break) (struct channel_t *ch, int); |
| void (*send_start_character) (struct channel_t *ch); |
| void (*send_stop_character) (struct channel_t *ch); |
| void (*copy_data_from_queue_to_uart) (struct channel_t *ch); |
| uint (*get_uart_bytes_left) (struct channel_t *ch); |
| void (*send_immediate_char) (struct channel_t *ch, unsigned char); |
| }; |
| |
| /************************************************************************ |
| * Device flag definitions for bd_flags. |
| ************************************************************************/ |
| #define BD_IS_PCI_EXPRESS 0x0001 /* Is a PCI Express board */ |
| |
| |
| /* |
| * Per-board information |
| */ |
| struct board_t { |
| int magic; /* Board Magic number. */ |
| int boardnum; /* Board number: 0-32 */ |
| |
| int type; /* Type of board */ |
| char *name; /* Product Name */ |
| struct pci_dev *pdev; /* Pointer to the pci_dev struct */ |
| unsigned long bd_flags; /* Board flags */ |
| u16 vendor; /* PCI vendor ID */ |
| u16 device; /* PCI device ID */ |
| u16 subvendor; /* PCI subsystem vendor ID */ |
| u16 subdevice; /* PCI subsystem device ID */ |
| uchar rev; /* PCI revision ID */ |
| uint pci_bus; /* PCI bus value */ |
| uint pci_slot; /* PCI slot value */ |
| uint maxports; /* MAX ports this board can handle */ |
| uchar dvid; /* Board specific device id */ |
| uchar vpd[128]; /* VPD of board, if found */ |
| uchar serial_num[20]; /* Serial number of board, if found in VPD */ |
| |
| spinlock_t bd_lock; /* Used to protect board */ |
| |
| spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and |
| * the interrupt routine from each other. |
| */ |
| |
| uint state; /* State of card. */ |
| wait_queue_head_t state_wait; /* Place to sleep on for state change */ |
| |
| struct tasklet_struct helper_tasklet; /* Poll helper tasklet */ |
| |
| uint nasync; /* Number of ports on card */ |
| |
| uint irq; /* Interrupt request number */ |
| ulong intr_count; /* Count of interrupts */ |
| ulong intr_modem; /* Count of interrupts */ |
| ulong intr_tx; /* Count of interrupts */ |
| ulong intr_rx; /* Count of interrupts */ |
| |
| ulong membase; /* Start of base memory of the card */ |
| ulong membase_end; /* End of base memory of the card */ |
| |
| u8 __iomem *re_map_membase;/* Remapped memory of the card */ |
| |
| ulong iobase; /* Start of io base of the card */ |
| ulong iobase_end; /* End of io base of the card */ |
| |
| uint bd_uart_offset; /* Space between each UART */ |
| |
| struct channel_t *channels[MAXPORTS]; /* array of pointers to our channels. */ |
| |
| struct tty_driver SerialDriver; |
| char SerialName[200]; |
| struct tty_driver PrintDriver; |
| char PrintName[200]; |
| |
| uint dgnc_Major_Serial_Registered; |
| uint dgnc_Major_TransparentPrint_Registered; |
| |
| uint dgnc_Serial_Major; |
| uint dgnc_TransparentPrint_Major; |
| |
| uint TtyRefCnt; |
| |
| char *flipbuf; /* Our flip buffer, alloced if board is found */ |
| |
| u16 dpatype; /* The board "type", as defined by DPA */ |
| u16 dpastatus; /* The board "status", as defined by DPA */ |
| |
| /* |
| * Mgmt data. |
| */ |
| char *msgbuf_head; |
| char *msgbuf; |
| |
| uint bd_dividend; /* Board/UARTs specific dividend */ |
| |
| struct board_ops *bd_ops; |
| |
| /* /proc/<board> entries */ |
| struct proc_dir_entry *proc_entry_pointer; |
| struct dgnc_proc_entry *dgnc_board_table; |
| |
| }; |
| |
| |
| /************************************************************************ |
| * Unit flag definitions for un_flags. |
| ************************************************************************/ |
| #define UN_ISOPEN 0x0001 /* Device is open */ |
| #define UN_CLOSING 0x0002 /* Line is being closed */ |
| #define UN_IMM 0x0004 /* Service immediately */ |
| #define UN_BUSY 0x0008 /* Some work this channel */ |
| #define UN_BREAKI 0x0010 /* Input break received */ |
| #define UN_PWAIT 0x0020 /* Printer waiting for terminal */ |
| #define UN_TIME 0x0040 /* Waiting on time */ |
| #define UN_EMPTY 0x0080 /* Waiting output queue empty */ |
| #define UN_LOW 0x0100 /* Waiting output low water mark*/ |
| #define UN_EXCL_OPEN 0x0200 /* Open for exclusive use */ |
| #define UN_WOPEN 0x0400 /* Device waiting for open */ |
| #define UN_WIOCTL 0x0800 /* Device waiting for open */ |
| #define UN_HANGUP 0x8000 /* Carrier lost */ |
| |
| struct device; |
| |
| /************************************************************************ |
| * Structure for terminal or printer unit. |
| ************************************************************************/ |
| struct un_t { |
| int magic; /* Unit Magic Number. */ |
| struct channel_t *un_ch; |
| ulong un_time; |
| uint un_type; |
| uint un_open_count; /* Counter of opens to port */ |
| struct tty_struct *un_tty;/* Pointer to unit tty structure */ |
| uint un_flags; /* Unit flags */ |
| wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */ |
| uint un_dev; /* Minor device number */ |
| struct device *un_sysfs; |
| }; |
| |
| |
| /************************************************************************ |
| * Device flag definitions for ch_flags. |
| ************************************************************************/ |
| #define CH_PRON 0x0001 /* Printer on string */ |
| #define CH_STOP 0x0002 /* Output is stopped */ |
| #define CH_STOPI 0x0004 /* Input is stopped */ |
| #define CH_CD 0x0008 /* Carrier is present */ |
| #define CH_FCAR 0x0010 /* Carrier forced on */ |
| #define CH_HANGUP 0x0020 /* Hangup received */ |
| |
| #define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ |
| #define CH_OPENING 0x0080 /* Port in fragile open state */ |
| #define CH_CLOSING 0x0100 /* Port in fragile close state */ |
| #define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ |
| #define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ |
| #define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ |
| #define CH_BREAK_SENDING 0x1000 /* Break is being sent */ |
| #define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ |
| #define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ |
| #define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ |
| #define CH_FORCED_STOP 0x20000 /* Output is forcibly stopped */ |
| #define CH_FORCED_STOPI 0x40000 /* Input is forcibly stopped */ |
| |
| /* |
| * Definitions for ch_sniff_flags |
| */ |
| #define SNIFF_OPEN 0x1 |
| #define SNIFF_WAIT_DATA 0x2 |
| #define SNIFF_WAIT_SPACE 0x4 |
| |
| |
| /* Our Read/Error/Write queue sizes */ |
| #define RQUEUEMASK 0x1FFF /* 8 K - 1 */ |
| #define EQUEUEMASK 0x1FFF /* 8 K - 1 */ |
| #define WQUEUEMASK 0x0FFF /* 4 K - 1 */ |
| #define RQUEUESIZE (RQUEUEMASK + 1) |
| #define EQUEUESIZE RQUEUESIZE |
| #define WQUEUESIZE (WQUEUEMASK + 1) |
| |
| |
| /************************************************************************ |
| * Channel information structure. |
| ************************************************************************/ |
| struct channel_t { |
| int magic; /* Channel Magic Number */ |
| struct board_t *ch_bd; /* Board structure pointer */ |
| struct digi_t ch_digi; /* Transparent Print structure */ |
| struct un_t ch_tun; /* Terminal unit info */ |
| struct un_t ch_pun; /* Printer unit info */ |
| |
| spinlock_t ch_lock; /* provide for serialization */ |
| wait_queue_head_t ch_flags_wait; |
| |
| uint ch_portnum; /* Port number, 0 offset. */ |
| uint ch_open_count; /* open count */ |
| uint ch_flags; /* Channel flags */ |
| |
| ulong ch_close_delay; /* How long we should drop RTS/DTR for */ |
| |
| ulong ch_cpstime; /* Time for CPS calculations */ |
| |
| tcflag_t ch_c_iflag; /* channel iflags */ |
| tcflag_t ch_c_cflag; /* channel cflags */ |
| tcflag_t ch_c_oflag; /* channel oflags */ |
| tcflag_t ch_c_lflag; /* channel lflags */ |
| uchar ch_stopc; /* Stop character */ |
| uchar ch_startc; /* Start character */ |
| |
| uint ch_old_baud; /* Cache of the current baud */ |
| uint ch_custom_speed;/* Custom baud, if set */ |
| |
| uint ch_wopen; /* Waiting for open process cnt */ |
| |
| uchar ch_mostat; /* FEP output modem status */ |
| uchar ch_mistat; /* FEP input modem status */ |
| |
| struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ |
| struct cls_uart_struct __iomem *ch_cls_uart; /* Pointer to the "mapped" UART struct */ |
| |
| uchar ch_cached_lsr; /* Cached value of the LSR register */ |
| |
| uchar *ch_rqueue; /* Our read queue buffer - malloc'ed */ |
| ushort ch_r_head; /* Head location of the read queue */ |
| ushort ch_r_tail; /* Tail location of the read queue */ |
| |
| uchar *ch_equeue; /* Our error queue buffer - malloc'ed */ |
| ushort ch_e_head; /* Head location of the error queue */ |
| ushort ch_e_tail; /* Tail location of the error queue */ |
| |
| uchar *ch_wqueue; /* Our write queue buffer - malloc'ed */ |
| ushort ch_w_head; /* Head location of the write queue */ |
| ushort ch_w_tail; /* Tail location of the write queue */ |
| |
| ulong ch_rxcount; /* total of data received so far */ |
| ulong ch_txcount; /* total of data transmitted so far */ |
| |
| uchar ch_r_tlevel; /* Receive Trigger level */ |
| uchar ch_t_tlevel; /* Transmit Trigger level */ |
| |
| uchar ch_r_watermark; /* Receive Watermark */ |
| |
| ulong ch_stop_sending_break; /* Time we should STOP sending a break */ |
| |
| uint ch_stops_sent; /* How many times I have sent a stop character |
| * to try to stop the other guy sending. |
| */ |
| ulong ch_err_parity; /* Count of parity errors on channel */ |
| ulong ch_err_frame; /* Count of framing errors on channel */ |
| ulong ch_err_break; /* Count of breaks on channel */ |
| ulong ch_err_overrun; /* Count of overruns on channel */ |
| |
| ulong ch_xon_sends; /* Count of xons transmitted */ |
| ulong ch_xoff_sends; /* Count of xoffs transmitted */ |
| |
| ulong ch_intr_modem; /* Count of interrupts */ |
| ulong ch_intr_tx; /* Count of interrupts */ |
| ulong ch_intr_rx; /* Count of interrupts */ |
| |
| |
| /* /proc/<board>/<channel> entries */ |
| struct proc_dir_entry *proc_entry_pointer; |
| struct dgnc_proc_entry *dgnc_channel_table; |
| |
| uint ch_sniff_in; |
| uint ch_sniff_out; |
| char *ch_sniff_buf; /* Sniff buffer for proc */ |
| ulong ch_sniff_flags; /* Channel flags */ |
| wait_queue_head_t ch_sniff_wait; |
| }; |
| |
| |
| /************************************************************************* |
| * |
| * Prototypes for non-static functions used in more than one module |
| * |
| *************************************************************************/ |
| |
| extern int dgnc_ms_sleep(ulong ms); |
| extern char *dgnc_ioctl_name(int cmd); |
| |
| /* |
| * Our Global Variables. |
| */ |
| extern int dgnc_driver_state; /* The state of the driver */ |
| extern uint dgnc_Major; /* Our driver/mgmt major */ |
| extern int dgnc_debug; /* Debug variable */ |
| extern int dgnc_rawreadok; /* Set if user wants rawreads */ |
| extern int dgnc_poll_tick; /* Poll interval - 20 ms */ |
| extern int dgnc_trcbuf_size; /* Size of the ringbuffer */ |
| extern spinlock_t dgnc_global_lock; /* Driver global spinlock */ |
| extern uint dgnc_NumBoards; /* Total number of boards */ |
| extern struct board_t *dgnc_Board[MAXBOARDS]; /* Array of board structs */ |
| extern ulong dgnc_poll_counter; /* Times the poller has run */ |
| extern char *dgnc_state_text[]; /* Array of state text */ |
| extern char *dgnc_driver_state_text[];/* Array of driver state text */ |
| |
| #endif |