[media] rc: rename the remaining things to rc_core
The Remote Controller subsystem is meant to be used not only by Infra Red
but also for similar types of Remote Controllers. The core is not specific
to Infra Red. As such, rename:
- ir-core.h to rc-core.h
- IR_CORE to RC_CORE
- namespace inside rc-core.c/rc-core.h
To be consistent with the other changes.
No functional change on this patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index ef193758..42b4feb 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -1,16 +1,17 @@
-menuconfig IR_CORE
- tristate "Infrared remote controller adapters"
+menuconfig RC_CORE
+ tristate "Remote Controller adapters"
depends on INPUT
default INPUT
---help---
Enable support for Remote Controllers on Linux. This is
needed in order to support several video capture adapters.
+ Currently, all supported devices use InfraRed.
Enable this option if you have a video capture board even
if you don't need IR, as otherwise, you may not be able to
compile the driver for your adapter.
-if IR_CORE
+if RC_CORE
config LIRC
tristate
@@ -27,7 +28,7 @@
config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -37,7 +38,7 @@
config IR_RC5_DECODER
tristate "Enable IR raw decoder for the RC-5 protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -47,7 +48,7 @@
config IR_RC6_DECODER
tristate "Enable IR raw decoder for the RC6 protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -57,7 +58,7 @@
config IR_JVC_DECODER
tristate "Enable IR raw decoder for the JVC protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -67,7 +68,7 @@
config IR_SONY_DECODER
tristate "Enable IR raw decoder for the Sony protocol"
- depends on IR_CORE
+ depends on RC_CORE
default y
---help---
@@ -76,7 +77,7 @@
config IR_RC5_SZ_DECODER
tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -88,7 +89,7 @@
config IR_LIRC_CODEC
tristate "Enable IR to LIRC bridge"
- depends on IR_CORE
+ depends on RC_CORE
depends on LIRC
default y
@@ -99,7 +100,7 @@
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP
- depends on IR_CORE
+ depends on RC_CORE
---help---
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
@@ -113,7 +114,7 @@
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
@@ -125,7 +126,7 @@
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a Windows Media Center Edition
@@ -137,7 +138,7 @@
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP
- depends on IR_CORE
+ depends on RC_CORE
---help---
Say Y here to enable support for integrated infrared receiver
/transciever made by Nuvoton (formerly Winbond). This chip is
@@ -150,7 +151,7 @@
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a Streamzap PC Remote
@@ -162,7 +163,7 @@
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
depends on X86 && PNP
- depends on IR_CORE
+ depends on RC_CORE
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
@@ -176,4 +177,4 @@
To compile this driver as a module, choose M here: the module will
be called winbond_cir.
-endif #IR_CORE
+endif #RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 8c0e4cb..21251ba 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -2,7 +2,7 @@
obj-y += keymaps/
-obj-$(CONFIG_IR_CORE) += rc-core.o
+obj-$(CONFIG_RC_CORE) += rc-core.o
obj-$(CONFIG_LIRC) += lirc_dev.o
obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 0a4151f..1ace458 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -37,7 +37,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "ene_ir.h"
static int sample_period;
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 8d4b35d..b6ba3c7 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -38,7 +38,7 @@
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/time.h>
#include <linux/timer.h>
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index ceabea6..f9086c5 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -16,7 +16,7 @@
#include <linux/wait.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "rc-core-priv.h"
#define LIRCBUF_SIZE 256
diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig
index 14b22f5..8e615fd 100644
--- a/drivers/media/rc/keymaps/Kconfig
+++ b/drivers/media/rc/keymaps/Kconfig
@@ -1,6 +1,6 @@
config RC_MAP
tristate "Compile Remote Controller keymap modules"
- depends on IR_CORE
+ depends on RC_CORE
default y
---help---
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index 43fcf90..9c8577d 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -9,7 +9,7 @@
* (at your option) any later version.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
static struct ir_scancode lirc[] = {
{ },
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 539bec2..db7787a 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -37,7 +37,7 @@
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRIVER_VERSION "1.91"
#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 0ce328f..bf3f58f 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -32,7 +32,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/pci_ids.h>
#include "nuvoton-cir.h"
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 3616c32..48065b7 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -18,7 +18,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
struct ir_raw_handler {
struct list_head list;
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 5b67eea..d91b62c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -1103,11 +1103,11 @@
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
*/
-static int __init ir_core_init(void)
+static int __init rc_core_init(void)
{
int rc = class_register(&ir_input_class);
if (rc) {
- printk(KERN_ERR "ir_core: unable to register rc class\n");
+ printk(KERN_ERR "rc_core: unable to register rc class\n");
return rc;
}
@@ -1118,18 +1118,18 @@
return 0;
}
-static void __exit ir_core_exit(void)
+static void __exit rc_core_exit(void)
{
class_unregister(&ir_input_class);
ir_unregister_map(&empty_map);
}
-module_init(ir_core_init);
-module_exit(ir_core_exit);
+module_init(rc_core_init);
+module_exit(rc_core_exit);
-int ir_core_debug; /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
+int rc_core_debug; /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(rc_core_debug);
+module_param_named(debug, rc_core_debug, int, 0644);
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/rc-raw.c b/drivers/media/rc/rc-raw.c
index ab9b1e40..165412f 100644
--- a/drivers/media/rc/rc-raw.c
+++ b/drivers/media/rc/rc-raw.c
@@ -357,7 +357,7 @@
load_lirc_codec();
/* If needed, we may later add some init code. In this case,
- it is needed to change the CONFIG_MODULE test at ir-core.h
+ it is needed to change the CONFIG_MODULE test at rc-core.h
*/
}
#endif
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index f05f5c1..ea2cb63 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -36,7 +36,7 @@
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRIVER_VERSION "1.61"
#define DRIVER_NAME "streamzap"
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 0ee16ec..186de55 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -50,7 +50,7 @@
#include <linux/io.h>
#include <linux/bitrev.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRVNAME "winbond-cir"