| /* |
| * Copyright (C) 2007, 2008, Marvell International Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #ifndef MV_XOR_H |
| #define MV_XOR_H |
| |
| #include <linux/types.h> |
| #include <linux/io.h> |
| #include <linux/dmaengine.h> |
| #include <linux/interrupt.h> |
| |
| #define MV_XOR_POOL_SIZE PAGE_SIZE |
| #define MV_XOR_SLOT_SIZE 64 |
| #define MV_XOR_THRESHOLD 1 |
| #define MV_XOR_MAX_CHANNELS 2 |
| |
| #define MV_XOR_MIN_BYTE_COUNT SZ_128 |
| #define MV_XOR_MAX_BYTE_COUNT (SZ_16M - 1) |
| |
| /* Values for the XOR_CONFIG register */ |
| #define XOR_OPERATION_MODE_XOR 0 |
| #define XOR_OPERATION_MODE_MEMCPY 2 |
| #define XOR_DESCRIPTOR_SWAP BIT(14) |
| |
| #define XOR_DESC_DMA_OWNED BIT(31) |
| #define XOR_DESC_EOD_INT_EN BIT(31) |
| |
| #define XOR_CURR_DESC(chan) (chan->mmr_high_base + 0x10 + (chan->idx * 4)) |
| #define XOR_NEXT_DESC(chan) (chan->mmr_high_base + 0x00 + (chan->idx * 4)) |
| #define XOR_BYTE_COUNT(chan) (chan->mmr_high_base + 0x20 + (chan->idx * 4)) |
| #define XOR_DEST_POINTER(chan) (chan->mmr_high_base + 0xB0 + (chan->idx * 4)) |
| #define XOR_BLOCK_SIZE(chan) (chan->mmr_high_base + 0xC0 + (chan->idx * 4)) |
| #define XOR_INIT_VALUE_LOW(chan) (chan->mmr_high_base + 0xE0) |
| #define XOR_INIT_VALUE_HIGH(chan) (chan->mmr_high_base + 0xE4) |
| |
| #define XOR_CONFIG(chan) (chan->mmr_base + 0x10 + (chan->idx * 4)) |
| #define XOR_ACTIVATION(chan) (chan->mmr_base + 0x20 + (chan->idx * 4)) |
| #define XOR_INTR_CAUSE(chan) (chan->mmr_base + 0x30) |
| #define XOR_INTR_MASK(chan) (chan->mmr_base + 0x40) |
| #define XOR_ERROR_CAUSE(chan) (chan->mmr_base + 0x50) |
| #define XOR_ERROR_ADDR(chan) (chan->mmr_base + 0x60) |
| |
| #define XOR_INT_END_OF_DESC BIT(0) |
| #define XOR_INT_END_OF_CHAIN BIT(1) |
| #define XOR_INT_STOPPED BIT(2) |
| #define XOR_INT_PAUSED BIT(3) |
| #define XOR_INT_ERR_DECODE BIT(4) |
| #define XOR_INT_ERR_RDPROT BIT(5) |
| #define XOR_INT_ERR_WRPROT BIT(6) |
| #define XOR_INT_ERR_OWN BIT(7) |
| #define XOR_INT_ERR_PAR BIT(8) |
| #define XOR_INT_ERR_MBUS BIT(9) |
| |
| #define XOR_INTR_ERRORS (XOR_INT_ERR_DECODE | XOR_INT_ERR_RDPROT | \ |
| XOR_INT_ERR_WRPROT | XOR_INT_ERR_OWN | \ |
| XOR_INT_ERR_PAR | XOR_INT_ERR_MBUS) |
| |
| #define XOR_INTR_MASK_VALUE (XOR_INT_END_OF_DESC | XOR_INT_END_OF_CHAIN | \ |
| XOR_INT_STOPPED | XOR_INTR_ERRORS) |
| |
| #define WINDOW_BASE(w) (0x50 + ((w) << 2)) |
| #define WINDOW_SIZE(w) (0x70 + ((w) << 2)) |
| #define WINDOW_REMAP_HIGH(w) (0x90 + ((w) << 2)) |
| #define WINDOW_BAR_ENABLE(chan) (0x40 + ((chan) << 2)) |
| #define WINDOW_OVERRIDE_CTRL(chan) (0xA0 + ((chan) << 2)) |
| |
| struct mv_xor_device { |
| void __iomem *xor_base; |
| void __iomem *xor_high_base; |
| struct clk *clk; |
| struct mv_xor_chan *channels[MV_XOR_MAX_CHANNELS]; |
| }; |
| |
| /** |
| * struct mv_xor_chan - internal representation of a XOR channel |
| * @pending: allows batching of hardware operations |
| * @lock: serializes enqueue/dequeue operations to the descriptors pool |
| * @mmr_base: memory mapped register base |
| * @idx: the index of the xor channel |
| * @chain: device chain view of the descriptors |
| * @completed_slots: slots completed by HW but still need to be acked |
| * @device: parent device |
| * @common: common dmaengine channel object members |
| * @last_used: place holder for allocation to continue from where it left off |
| * @all_slots: complete domain of slots usable by the channel |
| * @slots_allocated: records the actual size of the descriptor slot pool |
| * @irq_tasklet: bottom half where mv_xor_slot_cleanup runs |
| */ |
| struct mv_xor_chan { |
| int pending; |
| spinlock_t lock; /* protects the descriptor slot pool */ |
| void __iomem *mmr_base; |
| void __iomem *mmr_high_base; |
| unsigned int idx; |
| int irq; |
| enum dma_transaction_type current_type; |
| struct list_head chain; |
| struct list_head completed_slots; |
| dma_addr_t dma_desc_pool; |
| void *dma_desc_pool_virt; |
| size_t pool_size; |
| struct dma_device dmadev; |
| struct dma_chan dmachan; |
| struct mv_xor_desc_slot *last_used; |
| struct list_head all_slots; |
| int slots_allocated; |
| struct tasklet_struct irq_tasklet; |
| char dummy_src[MV_XOR_MIN_BYTE_COUNT]; |
| char dummy_dst[MV_XOR_MIN_BYTE_COUNT]; |
| dma_addr_t dummy_src_addr, dummy_dst_addr; |
| }; |
| |
| /** |
| * struct mv_xor_desc_slot - software descriptor |
| * @slot_node: node on the mv_xor_chan.all_slots list |
| * @chain_node: node on the mv_xor_chan.chain list |
| * @completed_node: node on the mv_xor_chan.completed_slots list |
| * @hw_desc: virtual address of the hardware descriptor chain |
| * @phys: hardware address of the hardware descriptor chain |
| * @slot_used: slot in use or not |
| * @idx: pool index |
| * @tx_list: list of slots that make up a multi-descriptor transaction |
| * @async_tx: support for the async_tx api |
| */ |
| struct mv_xor_desc_slot { |
| struct list_head slot_node; |
| struct list_head chain_node; |
| struct list_head completed_node; |
| enum dma_transaction_type type; |
| void *hw_desc; |
| u16 slot_used; |
| u16 idx; |
| struct dma_async_tx_descriptor async_tx; |
| }; |
| |
| /* |
| * This structure describes XOR descriptor size 64bytes. The |
| * mv_phy_src_idx() macro must be used when indexing the values of the |
| * phy_src_addr[] array. This is due to the fact that the 'descriptor |
| * swap' feature, used on big endian systems, swaps descriptors data |
| * within blocks of 8 bytes. So two consecutive values of the |
| * phy_src_addr[] array are actually swapped in big-endian, which |
| * explains the different mv_phy_src_idx() implementation. |
| */ |
| #if defined(__LITTLE_ENDIAN) |
| struct mv_xor_desc { |
| u32 status; /* descriptor execution status */ |
| u32 crc32_result; /* result of CRC-32 calculation */ |
| u32 desc_command; /* type of operation to be carried out */ |
| u32 phy_next_desc; /* next descriptor address pointer */ |
| u32 byte_count; /* size of src/dst blocks in bytes */ |
| u32 phy_dest_addr; /* destination block address */ |
| u32 phy_src_addr[8]; /* source block addresses */ |
| u32 reserved0; |
| u32 reserved1; |
| }; |
| #define mv_phy_src_idx(src_idx) (src_idx) |
| #else |
| struct mv_xor_desc { |
| u32 crc32_result; /* result of CRC-32 calculation */ |
| u32 status; /* descriptor execution status */ |
| u32 phy_next_desc; /* next descriptor address pointer */ |
| u32 desc_command; /* type of operation to be carried out */ |
| u32 phy_dest_addr; /* destination block address */ |
| u32 byte_count; /* size of src/dst blocks in bytes */ |
| u32 phy_src_addr[8]; /* source block addresses */ |
| u32 reserved1; |
| u32 reserved0; |
| }; |
| #define mv_phy_src_idx(src_idx) (src_idx ^ 1) |
| #endif |
| |
| #define to_mv_sw_desc(addr_hw_desc) \ |
| container_of(addr_hw_desc, struct mv_xor_desc_slot, hw_desc) |
| |
| #define mv_hw_desc_slot_idx(hw_desc, idx) \ |
| ((void *)(((unsigned long)hw_desc) + ((idx) << 5))) |
| |
| #endif |