usb: musb: remove 'ignore_disconnect' flag
This was related to an old bug on early versions
of TUSB6010 which we don't support anymore.
It's known to cause issues on several other
situations with more recent devices so we
better remove this flag now and come up
with a better workaround should one be deemed
necessary.
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 37a261a..fc4d97e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -380,7 +380,6 @@
dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
usb_otg_state_string(musb->xceiv->state));
}
- musb->ignore_disconnect = 0;
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -727,7 +726,6 @@
b_host:
musb->xceiv->state = OTG_STATE_B_HOST;
hcd->self.is_b_host = 1;
- musb->ignore_disconnect = 0;
del_timer(&musb->otg_timer);
break;
default:
@@ -750,7 +748,7 @@
usb_otg_state_string(musb->xceiv->state), devctl);
}
- if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+ if (int_usb & MUSB_INTR_DISCONNECT) {
dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
usb_otg_state_string(musb->xceiv->state),
MUSB_MODE(musb), devctl);
@@ -818,11 +816,6 @@
usb_otg_state_string(musb->xceiv->state));
switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
- /* We need to ignore disconnect on suspend
- * otherwise tusb 2.0 won't reconnect after a
- * power cycle, which breaks otg compliance.
- */
- musb->ignore_disconnect = 1;
musb_g_reset(musb);
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
@@ -834,7 +827,6 @@
+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
break;
case OTG_STATE_A_PERIPHERAL:
- musb->ignore_disconnect = 0;
del_timer(&musb->otg_timer);
musb_g_reset(musb);
break;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 7fb4819..8013a5f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -382,7 +382,6 @@
unsigned is_active:1;
unsigned is_multipoint:1;
- unsigned ignore_disconnect:1; /* during bus resets */
unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index ef7d110..17c6c0d 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -145,7 +145,6 @@
msleep(1);
}
- musb->ignore_disconnect = true;
power &= 0xf0;
musb_writeb(mbase, MUSB_POWER,
power | MUSB_POWER_RESET);
@@ -158,8 +157,6 @@
musb_writeb(mbase, MUSB_POWER,
power & ~MUSB_POWER_RESET);
- musb->ignore_disconnect = false;
-
power = musb_readb(mbase, MUSB_POWER);
if (power & MUSB_POWER_HSMODE) {
dev_dbg(musb->controller, "high-speed device connected\n");