| /* |
| * Copyright (c) 2014 Linaro Ltd. |
| * Copyright (c) 2014 Hisilicon Limited. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * Now only support 7 bit address. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| |
| /* Register Map */ |
| #define HIX5I2C_CTRL 0x00 |
| #define HIX5I2C_COM 0x04 |
| #define HIX5I2C_ICR 0x08 |
| #define HIX5I2C_SR 0x0c |
| #define HIX5I2C_SCL_H 0x10 |
| #define HIX5I2C_SCL_L 0x14 |
| #define HIX5I2C_TXR 0x18 |
| #define HIX5I2C_RXR 0x1c |
| |
| /* I2C_CTRL_REG */ |
| #define I2C_ENABLE BIT(8) |
| #define I2C_UNMASK_TOTAL BIT(7) |
| #define I2C_UNMASK_START BIT(6) |
| #define I2C_UNMASK_END BIT(5) |
| #define I2C_UNMASK_SEND BIT(4) |
| #define I2C_UNMASK_RECEIVE BIT(3) |
| #define I2C_UNMASK_ACK BIT(2) |
| #define I2C_UNMASK_ARBITRATE BIT(1) |
| #define I2C_UNMASK_OVER BIT(0) |
| #define I2C_UNMASK_ALL (I2C_UNMASK_ACK | I2C_UNMASK_OVER) |
| |
| /* I2C_COM_REG */ |
| #define I2C_NO_ACK BIT(4) |
| #define I2C_START BIT(3) |
| #define I2C_READ BIT(2) |
| #define I2C_WRITE BIT(1) |
| #define I2C_STOP BIT(0) |
| |
| /* I2C_ICR_REG */ |
| #define I2C_CLEAR_START BIT(6) |
| #define I2C_CLEAR_END BIT(5) |
| #define I2C_CLEAR_SEND BIT(4) |
| #define I2C_CLEAR_RECEIVE BIT(3) |
| #define I2C_CLEAR_ACK BIT(2) |
| #define I2C_CLEAR_ARBITRATE BIT(1) |
| #define I2C_CLEAR_OVER BIT(0) |
| #define I2C_CLEAR_ALL (I2C_CLEAR_START | I2C_CLEAR_END | \ |
| I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \ |
| I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \ |
| I2C_CLEAR_OVER) |
| |
| /* I2C_SR_REG */ |
| #define I2C_BUSY BIT(7) |
| #define I2C_START_INTR BIT(6) |
| #define I2C_END_INTR BIT(5) |
| #define I2C_SEND_INTR BIT(4) |
| #define I2C_RECEIVE_INTR BIT(3) |
| #define I2C_ACK_INTR BIT(2) |
| #define I2C_ARBITRATE_INTR BIT(1) |
| #define I2C_OVER_INTR BIT(0) |
| |
| #define HIX5I2C_MAX_FREQ 400000 /* 400k */ |
| #define HIX5I2C_READ_OPERATION 0x01 |
| |
| enum hix5hd2_i2c_state { |
| HIX5I2C_STAT_RW_ERR = -1, |
| HIX5I2C_STAT_INIT, |
| HIX5I2C_STAT_RW, |
| HIX5I2C_STAT_SND_STOP, |
| HIX5I2C_STAT_RW_SUCCESS, |
| }; |
| |
| struct hix5hd2_i2c_priv { |
| struct i2c_adapter adap; |
| struct i2c_msg *msg; |
| struct completion msg_complete; |
| unsigned int msg_idx; |
| unsigned int msg_len; |
| int stop; |
| void __iomem *regs; |
| struct clk *clk; |
| struct device *dev; |
| spinlock_t lock; /* IRQ synchronization */ |
| int err; |
| unsigned int freq; |
| enum hix5hd2_i2c_state state; |
| }; |
| |
| static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c_priv *priv) |
| { |
| u32 val = readl_relaxed(priv->regs + HIX5I2C_SR); |
| |
| writel_relaxed(val, priv->regs + HIX5I2C_ICR); |
| |
| return val; |
| } |
| |
| static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c_priv *priv) |
| { |
| writel_relaxed(I2C_CLEAR_ALL, priv->regs + HIX5I2C_ICR); |
| } |
| |
| static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c_priv *priv) |
| { |
| writel_relaxed(0, priv->regs + HIX5I2C_CTRL); |
| } |
| |
| static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c_priv *priv) |
| { |
| writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL, |
| priv->regs + HIX5I2C_CTRL); |
| } |
| |
| static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c_priv *priv) |
| { |
| u32 rate, val; |
| u32 scl, sysclock; |
| |
| /* close all i2c interrupt */ |
| val = readl_relaxed(priv->regs + HIX5I2C_CTRL); |
| writel_relaxed(val & (~I2C_UNMASK_TOTAL), priv->regs + HIX5I2C_CTRL); |
| |
| rate = priv->freq; |
| sysclock = clk_get_rate(priv->clk); |
| scl = (sysclock / (rate * 2)) / 2 - 1; |
| writel_relaxed(scl, priv->regs + HIX5I2C_SCL_H); |
| writel_relaxed(scl, priv->regs + HIX5I2C_SCL_L); |
| |
| /* restore original interrupt*/ |
| writel_relaxed(val, priv->regs + HIX5I2C_CTRL); |
| |
| dev_dbg(priv->dev, "%s: sysclock=%d, rate=%d, scl=%d\n", |
| __func__, sysclock, rate, scl); |
| } |
| |
| static void hix5hd2_i2c_init(struct hix5hd2_i2c_priv *priv) |
| { |
| hix5hd2_i2c_disable_irq(priv); |
| hix5hd2_i2c_drv_setrate(priv); |
| hix5hd2_i2c_clr_all_irq(priv); |
| hix5hd2_i2c_enable_irq(priv); |
| } |
| |
| static void hix5hd2_i2c_reset(struct hix5hd2_i2c_priv *priv) |
| { |
| clk_disable_unprepare(priv->clk); |
| msleep(20); |
| clk_prepare_enable(priv->clk); |
| hix5hd2_i2c_init(priv); |
| } |
| |
| static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c_priv *priv) |
| { |
| unsigned long stop_time; |
| u32 int_status; |
| |
| /* wait for 100 milli seconds for the bus to be idle */ |
| stop_time = jiffies + msecs_to_jiffies(100); |
| do { |
| int_status = hix5hd2_i2c_clr_pend_irq(priv); |
| if (!(int_status & I2C_BUSY)) |
| return 0; |
| |
| usleep_range(50, 200); |
| } while (time_before(jiffies, stop_time)); |
| |
| return -EBUSY; |
| } |
| |
| static void hix5hd2_rw_over(struct hix5hd2_i2c_priv *priv) |
| { |
| if (priv->state == HIX5I2C_STAT_SND_STOP) |
| dev_dbg(priv->dev, "%s: rw and send stop over\n", __func__); |
| else |
| dev_dbg(priv->dev, "%s: have not data to send\n", __func__); |
| |
| priv->state = HIX5I2C_STAT_RW_SUCCESS; |
| priv->err = 0; |
| } |
| |
| static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c_priv *priv) |
| { |
| if (priv->stop) { |
| priv->state = HIX5I2C_STAT_SND_STOP; |
| writel_relaxed(I2C_STOP, priv->regs + HIX5I2C_COM); |
| } else { |
| hix5hd2_rw_over(priv); |
| } |
| } |
| |
| static void hix5hd2_read_handle(struct hix5hd2_i2c_priv *priv) |
| { |
| if (priv->msg_len == 1) { |
| /* the last byte don't need send ACK */ |
| writel_relaxed(I2C_READ | I2C_NO_ACK, priv->regs + HIX5I2C_COM); |
| } else if (priv->msg_len > 1) { |
| /* if i2c master receive data will send ACK */ |
| writel_relaxed(I2C_READ, priv->regs + HIX5I2C_COM); |
| } else { |
| hix5hd2_rw_handle_stop(priv); |
| } |
| } |
| |
| static void hix5hd2_write_handle(struct hix5hd2_i2c_priv *priv) |
| { |
| u8 data; |
| |
| if (priv->msg_len > 0) { |
| data = priv->msg->buf[priv->msg_idx++]; |
| writel_relaxed(data, priv->regs + HIX5I2C_TXR); |
| writel_relaxed(I2C_WRITE, priv->regs + HIX5I2C_COM); |
| } else { |
| hix5hd2_rw_handle_stop(priv); |
| } |
| } |
| |
| static int hix5hd2_rw_preprocess(struct hix5hd2_i2c_priv *priv) |
| { |
| u8 data; |
| |
| if (priv->state == HIX5I2C_STAT_INIT) { |
| priv->state = HIX5I2C_STAT_RW; |
| } else if (priv->state == HIX5I2C_STAT_RW) { |
| if (priv->msg->flags & I2C_M_RD) { |
| data = readl_relaxed(priv->regs + HIX5I2C_RXR); |
| priv->msg->buf[priv->msg_idx++] = data; |
| } |
| priv->msg_len--; |
| } else { |
| dev_dbg(priv->dev, "%s: error: priv->state = %d, msg_len = %d\n", |
| __func__, priv->state, priv->msg_len); |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id) |
| { |
| struct hix5hd2_i2c_priv *priv = dev_id; |
| u32 int_status; |
| int ret; |
| |
| spin_lock(&priv->lock); |
| |
| int_status = hix5hd2_i2c_clr_pend_irq(priv); |
| |
| /* handle error */ |
| if (int_status & I2C_ARBITRATE_INTR) { |
| /* bus error */ |
| dev_dbg(priv->dev, "ARB bus loss\n"); |
| priv->err = -EAGAIN; |
| priv->state = HIX5I2C_STAT_RW_ERR; |
| goto stop; |
| } else if (int_status & I2C_ACK_INTR) { |
| /* ack error */ |
| dev_dbg(priv->dev, "No ACK from device\n"); |
| priv->err = -ENXIO; |
| priv->state = HIX5I2C_STAT_RW_ERR; |
| goto stop; |
| } |
| |
| if (int_status & I2C_OVER_INTR) { |
| if (priv->msg_len > 0) { |
| ret = hix5hd2_rw_preprocess(priv); |
| if (ret) { |
| priv->err = ret; |
| priv->state = HIX5I2C_STAT_RW_ERR; |
| goto stop; |
| } |
| if (priv->msg->flags & I2C_M_RD) |
| hix5hd2_read_handle(priv); |
| else |
| hix5hd2_write_handle(priv); |
| } else { |
| hix5hd2_rw_over(priv); |
| } |
| } |
| |
| stop: |
| if ((priv->state == HIX5I2C_STAT_RW_SUCCESS && |
| priv->msg->len == priv->msg_idx) || |
| (priv->state == HIX5I2C_STAT_RW_ERR)) { |
| hix5hd2_i2c_disable_irq(priv); |
| hix5hd2_i2c_clr_pend_irq(priv); |
| complete(&priv->msg_complete); |
| } |
| |
| spin_unlock(&priv->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| hix5hd2_i2c_clr_all_irq(priv); |
| hix5hd2_i2c_enable_irq(priv); |
| |
| if (priv->msg->flags & I2C_M_RD) |
| writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION, |
| priv->regs + HIX5I2C_TXR); |
| else |
| writel_relaxed(priv->msg->addr << 1, |
| priv->regs + HIX5I2C_TXR); |
| |
| writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv, |
| struct i2c_msg *msgs, int stop) |
| { |
| unsigned long timeout; |
| int ret; |
| |
| priv->msg = msgs; |
| priv->msg_idx = 0; |
| priv->msg_len = priv->msg->len; |
| priv->stop = stop; |
| priv->err = 0; |
| priv->state = HIX5I2C_STAT_INIT; |
| |
| reinit_completion(&priv->msg_complete); |
| hix5hd2_i2c_message_start(priv, stop); |
| |
| timeout = wait_for_completion_timeout(&priv->msg_complete, |
| priv->adap.timeout); |
| if (timeout == 0) { |
| priv->state = HIX5I2C_STAT_RW_ERR; |
| priv->err = -ETIMEDOUT; |
| dev_warn(priv->dev, "%s timeout=%d\n", |
| msgs->flags & I2C_M_RD ? "rx" : "tx", |
| priv->adap.timeout); |
| } |
| ret = priv->state; |
| |
| /* |
| * If this is the last message to be transfered (stop == 1) |
| * Then check if the bus can be brought back to idle. |
| */ |
| if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop) |
| ret = hix5hd2_i2c_wait_bus_idle(priv); |
| |
| if (ret < 0) |
| hix5hd2_i2c_reset(priv); |
| |
| return priv->err; |
| } |
| |
| static int hix5hd2_i2c_xfer(struct i2c_adapter *adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct hix5hd2_i2c_priv *priv = i2c_get_adapdata(adap); |
| int i, ret, stop; |
| |
| pm_runtime_get_sync(priv->dev); |
| |
| for (i = 0; i < num; i++, msgs++) { |
| stop = (i == num - 1); |
| ret = hix5hd2_i2c_xfer_msg(priv, msgs, stop); |
| if (ret < 0) |
| goto out; |
| } |
| |
| if (i == num) { |
| ret = num; |
| } else { |
| /* Only one message, cannot access the device */ |
| if (i == 1) |
| ret = -EREMOTEIO; |
| else |
| ret = i; |
| |
| dev_warn(priv->dev, "xfer message failed\n"); |
| } |
| |
| out: |
| pm_runtime_mark_last_busy(priv->dev); |
| pm_runtime_put_autosuspend(priv->dev); |
| return ret; |
| } |
| |
| static u32 hix5hd2_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); |
| } |
| |
| static const struct i2c_algorithm hix5hd2_i2c_algorithm = { |
| .master_xfer = hix5hd2_i2c_xfer, |
| .functionality = hix5hd2_i2c_func, |
| }; |
| |
| static int hix5hd2_i2c_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct hix5hd2_i2c_priv *priv; |
| struct resource *mem; |
| unsigned int freq; |
| int irq, ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(np, "clock-frequency", &freq)) { |
| /* use 100k as default value */ |
| priv->freq = 100000; |
| } else { |
| if (freq > HIX5I2C_MAX_FREQ) { |
| priv->freq = HIX5I2C_MAX_FREQ; |
| dev_warn(priv->dev, "use max freq %d instead\n", |
| HIX5I2C_MAX_FREQ); |
| } else { |
| priv->freq = freq; |
| } |
| } |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->regs = devm_ioremap_resource(&pdev->dev, mem); |
| if (IS_ERR(priv->regs)) |
| return PTR_ERR(priv->regs); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) { |
| dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n"); |
| return irq; |
| } |
| |
| priv->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(priv->clk)) { |
| dev_err(&pdev->dev, "cannot get clock\n"); |
| return PTR_ERR(priv->clk); |
| } |
| clk_prepare_enable(priv->clk); |
| |
| strlcpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name)); |
| priv->dev = &pdev->dev; |
| priv->adap.owner = THIS_MODULE; |
| priv->adap.algo = &hix5hd2_i2c_algorithm; |
| priv->adap.retries = 3; |
| priv->adap.dev.of_node = np; |
| priv->adap.algo_data = priv; |
| priv->adap.dev.parent = &pdev->dev; |
| i2c_set_adapdata(&priv->adap, priv); |
| platform_set_drvdata(pdev, priv); |
| spin_lock_init(&priv->lock); |
| init_completion(&priv->msg_complete); |
| |
| hix5hd2_i2c_init(priv); |
| |
| ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq, |
| IRQF_NO_SUSPEND | IRQF_ONESHOT, |
| dev_name(&pdev->dev), priv); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq); |
| goto err_clk; |
| } |
| |
| pm_suspend_ignore_children(&pdev->dev, true); |
| pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC); |
| pm_runtime_use_autosuspend(priv->dev); |
| pm_runtime_set_active(priv->dev); |
| pm_runtime_enable(priv->dev); |
| |
| ret = i2c_add_adapter(&priv->adap); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to add bus to i2c core\n"); |
| goto err_runtime; |
| } |
| |
| return ret; |
| |
| err_runtime: |
| pm_runtime_disable(priv->dev); |
| pm_runtime_set_suspended(priv->dev); |
| err_clk: |
| clk_disable_unprepare(priv->clk); |
| return ret; |
| } |
| |
| static int hix5hd2_i2c_remove(struct platform_device *pdev) |
| { |
| struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev); |
| |
| i2c_del_adapter(&priv->adap); |
| pm_runtime_disable(priv->dev); |
| pm_runtime_set_suspended(priv->dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int hix5hd2_i2c_runtime_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| return 0; |
| } |
| |
| static int hix5hd2_i2c_runtime_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev); |
| |
| clk_prepare_enable(priv->clk); |
| hix5hd2_i2c_init(priv); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops hix5hd2_i2c_pm_ops = { |
| SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend, |
| hix5hd2_i2c_runtime_resume, |
| NULL) |
| }; |
| |
| static const struct of_device_id hix5hd2_i2c_match[] = { |
| { .compatible = "hisilicon,hix5hd2-i2c" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match); |
| |
| static struct platform_driver hix5hd2_i2c_driver = { |
| .probe = hix5hd2_i2c_probe, |
| .remove = hix5hd2_i2c_remove, |
| .driver = { |
| .name = "hix5hd2-i2c", |
| .pm = &hix5hd2_i2c_pm_ops, |
| .of_match_table = hix5hd2_i2c_match, |
| }, |
| }; |
| |
| module_platform_driver(hix5hd2_i2c_driver); |
| |
| MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver"); |
| MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:i2c-hix5hd2"); |