| /* |
| * linux/drivers/pinctrl/pinmux-falcon.c |
| * based on linux/drivers/pinctrl/pinmux-pxa910.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com> |
| * Copyright (C) 2012 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_address.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| |
| #include "pinctrl-lantiq.h" |
| |
| #include <lantiq_soc.h> |
| |
| /* Multiplexer Control Register */ |
| #define LTQ_PADC_MUX(x) (x * 0x4) |
| /* Pull Up Enable Register */ |
| #define LTQ_PADC_PUEN 0x80 |
| /* Pull Down Enable Register */ |
| #define LTQ_PADC_PDEN 0x84 |
| /* Slew Rate Control Register */ |
| #define LTQ_PADC_SRC 0x88 |
| /* Drive Current Control Register */ |
| #define LTQ_PADC_DCC 0x8C |
| /* Pad Control Availability Register */ |
| #define LTQ_PADC_AVAIL 0xF0 |
| |
| #define pad_r32(p, reg) ltq_r32(p + reg) |
| #define pad_w32(p, val, reg) ltq_w32(val, p + reg) |
| #define pad_w32_mask(c, clear, set, reg) \ |
| pad_w32(c, (pad_r32(c, reg) & ~(clear)) | (set), reg) |
| |
| #define pad_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) |
| |
| #define PORTS 5 |
| #define PINS 32 |
| #define PORT(x) (x / PINS) |
| #define PORT_PIN(x) (x % PINS) |
| |
| #define MFP_FALCON(a, f0, f1, f2, f3) \ |
| { \ |
| .name = #a, \ |
| .pin = a, \ |
| .func = { \ |
| FALCON_MUX_##f0, \ |
| FALCON_MUX_##f1, \ |
| FALCON_MUX_##f2, \ |
| FALCON_MUX_##f3, \ |
| }, \ |
| } |
| |
| #define GRP_MUX(a, m, p) \ |
| { \ |
| .name = a, \ |
| .mux = FALCON_MUX_##m, \ |
| .pins = p, \ |
| .npins = ARRAY_SIZE(p), \ |
| } |
| |
| enum falcon_mux { |
| FALCON_MUX_GPIO = 0, |
| FALCON_MUX_RST, |
| FALCON_MUX_NTR, |
| FALCON_MUX_MDIO, |
| FALCON_MUX_LED, |
| FALCON_MUX_SPI, |
| FALCON_MUX_ASC, |
| FALCON_MUX_I2C, |
| FALCON_MUX_HOSTIF, |
| FALCON_MUX_SLIC, |
| FALCON_MUX_JTAG, |
| FALCON_MUX_PCM, |
| FALCON_MUX_MII, |
| FALCON_MUX_PHY, |
| FALCON_MUX_NONE = 0xffff, |
| }; |
| |
| static struct pinctrl_pin_desc falcon_pads[PORTS * PINS]; |
| static int pad_count[PORTS]; |
| |
| static void lantiq_load_pin_desc(struct pinctrl_pin_desc *d, int bank, int len) |
| { |
| int base = bank * PINS; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| /* strlen("ioXYZ") + 1 = 6 */ |
| char *name = kzalloc(6, GFP_KERNEL); |
| snprintf(name, 6, "io%d", base + i); |
| d[i].number = base + i; |
| d[i].name = name; |
| } |
| pad_count[bank] = len; |
| } |
| |
| static struct ltq_mfp_pin falcon_mfp[] = { |
| /* pin f0 f1 f2 f3 */ |
| MFP_FALCON(GPIO0, RST, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO1, GPIO, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO2, GPIO, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO3, GPIO, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO4, NTR, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO5, NTR, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO6, RST, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO7, MDIO, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO8, MDIO, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO9, LED, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO10, LED, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO11, LED, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO12, LED, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO13, LED, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO14, LED, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO32, ASC, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO33, ASC, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO34, SPI, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO35, SPI, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO36, SPI, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO37, SPI, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO38, SPI, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO39, I2C, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO40, I2C, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO41, HOSTIF, GPIO, HOSTIF, JTAG), |
| MFP_FALCON(GPIO42, HOSTIF, GPIO, HOSTIF, NONE), |
| MFP_FALCON(GPIO43, SLIC, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO44, SLIC, GPIO, PCM, ASC), |
| MFP_FALCON(GPIO45, SLIC, GPIO, PCM, ASC), |
| MFP_FALCON(GPIO64, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO65, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO66, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO67, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO68, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO69, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO70, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO71, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO72, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO73, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO74, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO75, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO76, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO77, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO78, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO79, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO80, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO81, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO82, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO83, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO84, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO85, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO86, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO87, MII, GPIO, NONE, NONE), |
| MFP_FALCON(GPIO88, PHY, GPIO, NONE, NONE), |
| }; |
| |
| static const unsigned pins_por[] = {GPIO0}; |
| static const unsigned pins_ntr[] = {GPIO4}; |
| static const unsigned pins_ntr8k[] = {GPIO5}; |
| static const unsigned pins_hrst[] = {GPIO6}; |
| static const unsigned pins_mdio[] = {GPIO7, GPIO8}; |
| static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11, |
| GPIO12, GPIO13, GPIO14}; |
| static const unsigned pins_asc0[] = {GPIO32, GPIO33}; |
| static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36}; |
| static const unsigned pins_spi_cs0[] = {GPIO37}; |
| static const unsigned pins_spi_cs1[] = {GPIO38}; |
| static const unsigned pins_i2c[] = {GPIO39, GPIO40}; |
| static const unsigned pins_jtag[] = {GPIO41}; |
| static const unsigned pins_slic[] = {GPIO43, GPIO44, GPIO45}; |
| static const unsigned pins_pcm[] = {GPIO44, GPIO45}; |
| static const unsigned pins_asc1[] = {GPIO44, GPIO45}; |
| |
| static struct ltq_pin_group falcon_grps[] = { |
| GRP_MUX("por", RST, pins_por), |
| GRP_MUX("ntr", NTR, pins_ntr), |
| GRP_MUX("ntr8k", NTR, pins_ntr8k), |
| GRP_MUX("hrst", RST, pins_hrst), |
| GRP_MUX("mdio", MDIO, pins_mdio), |
| GRP_MUX("bootled", LED, pins_bled), |
| GRP_MUX("asc0", ASC, pins_asc0), |
| GRP_MUX("spi", SPI, pins_spi), |
| GRP_MUX("spi cs0", SPI, pins_spi_cs0), |
| GRP_MUX("spi cs1", SPI, pins_spi_cs1), |
| GRP_MUX("i2c", I2C, pins_i2c), |
| GRP_MUX("jtag", JTAG, pins_jtag), |
| GRP_MUX("slic", SLIC, pins_slic), |
| GRP_MUX("pcm", PCM, pins_pcm), |
| GRP_MUX("asc1", ASC, pins_asc1), |
| }; |
| |
| static const char * const ltq_rst_grps[] = {"por", "hrst"}; |
| static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k"}; |
| static const char * const ltq_mdio_grps[] = {"mdio"}; |
| static const char * const ltq_bled_grps[] = {"bootled"}; |
| static const char * const ltq_asc_grps[] = {"asc0", "asc1"}; |
| static const char * const ltq_spi_grps[] = {"spi", "spi cs0", "spi cs1"}; |
| static const char * const ltq_i2c_grps[] = {"i2c"}; |
| static const char * const ltq_jtag_grps[] = {"jtag"}; |
| static const char * const ltq_slic_grps[] = {"slic"}; |
| static const char * const ltq_pcm_grps[] = {"pcm"}; |
| |
| static struct ltq_pmx_func falcon_funcs[] = { |
| {"rst", ARRAY_AND_SIZE(ltq_rst_grps)}, |
| {"ntr", ARRAY_AND_SIZE(ltq_ntr_grps)}, |
| {"mdio", ARRAY_AND_SIZE(ltq_mdio_grps)}, |
| {"led", ARRAY_AND_SIZE(ltq_bled_grps)}, |
| {"asc", ARRAY_AND_SIZE(ltq_asc_grps)}, |
| {"spi", ARRAY_AND_SIZE(ltq_spi_grps)}, |
| {"i2c", ARRAY_AND_SIZE(ltq_i2c_grps)}, |
| {"jtag", ARRAY_AND_SIZE(ltq_jtag_grps)}, |
| {"slic", ARRAY_AND_SIZE(ltq_slic_grps)}, |
| {"pcm", ARRAY_AND_SIZE(ltq_pcm_grps)}, |
| }; |
| |
| |
| |
| |
| /* --------- pinconf related code --------- */ |
| static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev, |
| unsigned group, unsigned long *config) |
| { |
| return -ENOTSUPP; |
| } |
| |
| static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev, |
| unsigned group, unsigned long config) |
| { |
| return -ENOTSUPP; |
| } |
| |
| static int falcon_pinconf_get(struct pinctrl_dev *pctrldev, |
| unsigned pin, unsigned long *config) |
| { |
| struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); |
| enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); |
| void __iomem *mem = info->membase[PORT(pin)]; |
| |
| switch (param) { |
| case LTQ_PINCONF_PARAM_DRIVE_CURRENT: |
| *config = LTQ_PINCONF_PACK(param, |
| !!pad_getbit(mem, LTQ_PADC_DCC, PORT_PIN(pin))); |
| break; |
| |
| case LTQ_PINCONF_PARAM_SLEW_RATE: |
| *config = LTQ_PINCONF_PACK(param, |
| !!pad_getbit(mem, LTQ_PADC_SRC, PORT_PIN(pin))); |
| break; |
| |
| case LTQ_PINCONF_PARAM_PULL: |
| if (pad_getbit(mem, LTQ_PADC_PDEN, PORT_PIN(pin))) |
| *config = LTQ_PINCONF_PACK(param, 1); |
| else if (pad_getbit(mem, LTQ_PADC_PUEN, PORT_PIN(pin))) |
| *config = LTQ_PINCONF_PACK(param, 2); |
| else |
| *config = LTQ_PINCONF_PACK(param, 0); |
| |
| break; |
| |
| default: |
| return -ENOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int falcon_pinconf_set(struct pinctrl_dev *pctrldev, |
| unsigned pin, unsigned long config) |
| { |
| enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); |
| int arg = LTQ_PINCONF_UNPACK_ARG(config); |
| struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); |
| void __iomem *mem = info->membase[PORT(pin)]; |
| u32 reg; |
| |
| switch (param) { |
| case LTQ_PINCONF_PARAM_DRIVE_CURRENT: |
| reg = LTQ_PADC_DCC; |
| break; |
| |
| case LTQ_PINCONF_PARAM_SLEW_RATE: |
| reg = LTQ_PADC_SRC; |
| break; |
| |
| case LTQ_PINCONF_PARAM_PULL: |
| if (arg == 1) |
| reg = LTQ_PADC_PDEN; |
| else |
| reg = LTQ_PADC_PUEN; |
| break; |
| |
| default: |
| pr_err("%s: Invalid config param %04x\n", |
| pinctrl_dev_get_name(pctrldev), param); |
| return -ENOTSUPP; |
| } |
| |
| pad_w32(mem, BIT(PORT_PIN(pin)), reg); |
| if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) |
| return -ENOTSUPP; |
| return 0; |
| } |
| |
| static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev, |
| struct seq_file *s, unsigned offset) |
| { |
| unsigned long config; |
| struct pin_desc *desc; |
| |
| struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); |
| int port = PORT(offset); |
| |
| seq_printf(s, " (port %d) mux %d -- ", port, |
| pad_r32(info->membase[port], LTQ_PADC_MUX(PORT_PIN(offset)))); |
| |
| config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_PULL, 0); |
| if (!falcon_pinconf_get(pctrldev, offset, &config)) |
| seq_printf(s, "pull %d ", |
| (int)LTQ_PINCONF_UNPACK_ARG(config)); |
| |
| config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_DRIVE_CURRENT, 0); |
| if (!falcon_pinconf_get(pctrldev, offset, &config)) |
| seq_printf(s, "drive-current %d ", |
| (int)LTQ_PINCONF_UNPACK_ARG(config)); |
| |
| config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_SLEW_RATE, 0); |
| if (!falcon_pinconf_get(pctrldev, offset, &config)) |
| seq_printf(s, "slew-rate %d ", |
| (int)LTQ_PINCONF_UNPACK_ARG(config)); |
| |
| desc = pin_desc_get(pctrldev, offset); |
| if (desc) { |
| if (desc->gpio_owner) |
| seq_printf(s, " owner: %s", desc->gpio_owner); |
| } else { |
| seq_printf(s, " not registered"); |
| } |
| } |
| |
| static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev, |
| struct seq_file *s, unsigned selector) |
| { |
| } |
| |
| static struct pinconf_ops falcon_pinconf_ops = { |
| .pin_config_get = falcon_pinconf_get, |
| .pin_config_set = falcon_pinconf_set, |
| .pin_config_group_get = falcon_pinconf_group_get, |
| .pin_config_group_set = falcon_pinconf_group_set, |
| .pin_config_dbg_show = falcon_pinconf_dbg_show, |
| .pin_config_group_dbg_show = falcon_pinconf_group_dbg_show, |
| }; |
| |
| static struct pinctrl_desc falcon_pctrl_desc = { |
| .owner = THIS_MODULE, |
| .pins = falcon_pads, |
| .confops = &falcon_pinconf_ops, |
| }; |
| |
| static inline int falcon_mux_apply(struct pinctrl_dev *pctrldev, |
| int mfp, int mux) |
| { |
| struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); |
| int port = PORT(info->mfp[mfp].pin); |
| |
| if ((port >= PORTS) || (!info->membase[port])) |
| return -ENODEV; |
| |
| pad_w32(info->membase[port], mux, |
| LTQ_PADC_MUX(PORT_PIN(info->mfp[mfp].pin))); |
| return 0; |
| } |
| |
| static const struct ltq_cfg_param falcon_cfg_params[] = { |
| {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, |
| {"lantiq,drive-current", LTQ_PINCONF_PARAM_DRIVE_CURRENT}, |
| {"lantiq,slew-rate", LTQ_PINCONF_PARAM_SLEW_RATE}, |
| }; |
| |
| static struct ltq_pinmux_info falcon_info = { |
| .desc = &falcon_pctrl_desc, |
| .apply_mux = falcon_mux_apply, |
| .params = falcon_cfg_params, |
| .num_params = ARRAY_SIZE(falcon_cfg_params), |
| }; |
| |
| |
| |
| |
| /* --------- register the pinctrl layer --------- */ |
| |
| int pinctrl_falcon_get_range_size(int id) |
| { |
| u32 avail; |
| |
| if ((id >= PORTS) || (!falcon_info.membase[id])) |
| return -EINVAL; |
| |
| avail = pad_r32(falcon_info.membase[id], LTQ_PADC_AVAIL); |
| |
| return fls(avail); |
| } |
| |
| void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range) |
| { |
| pinctrl_add_gpio_range(falcon_info.pctrl, range); |
| } |
| |
| static int pinctrl_falcon_probe(struct platform_device *pdev) |
| { |
| struct device_node *np; |
| int pad_count = 0; |
| int ret = 0; |
| |
| /* load and remap the pad resources of the different banks */ |
| for_each_compatible_node(np, NULL, "lantiq,pad-falcon") { |
| struct platform_device *ppdev = of_find_device_by_node(np); |
| const __be32 *bank = of_get_property(np, "lantiq,bank", NULL); |
| struct resource res; |
| u32 avail; |
| int pins; |
| |
| if (!of_device_is_available(np)) |
| continue; |
| |
| if (!ppdev) { |
| dev_err(&pdev->dev, "failed to find pad pdev\n"); |
| continue; |
| } |
| if (!bank || *bank >= PORTS) |
| continue; |
| if (of_address_to_resource(np, 0, &res)) |
| continue; |
| falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL); |
| if (IS_ERR(falcon_info.clk[*bank])) { |
| dev_err(&ppdev->dev, "failed to get clock\n"); |
| return PTR_ERR(falcon_info.clk[*bank]); |
| } |
| falcon_info.membase[*bank] = devm_ioremap_resource(&pdev->dev, |
| &res); |
| if (IS_ERR(falcon_info.membase[*bank])) |
| return PTR_ERR(falcon_info.membase[*bank]); |
| |
| avail = pad_r32(falcon_info.membase[*bank], |
| LTQ_PADC_AVAIL); |
| pins = fls(avail); |
| lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins); |
| pad_count += pins; |
| clk_enable(falcon_info.clk[*bank]); |
| dev_dbg(&pdev->dev, "found %s with %d pads\n", |
| res.name, pins); |
| } |
| dev_dbg(&pdev->dev, "found a total of %d pads\n", pad_count); |
| falcon_pctrl_desc.name = dev_name(&pdev->dev); |
| falcon_pctrl_desc.npins = pad_count; |
| |
| falcon_info.mfp = falcon_mfp; |
| falcon_info.num_mfp = ARRAY_SIZE(falcon_mfp); |
| falcon_info.grps = falcon_grps; |
| falcon_info.num_grps = ARRAY_SIZE(falcon_grps); |
| falcon_info.funcs = falcon_funcs; |
| falcon_info.num_funcs = ARRAY_SIZE(falcon_funcs); |
| |
| ret = ltq_pinctrl_register(pdev, &falcon_info); |
| if (!ret) |
| dev_info(&pdev->dev, "Init done\n"); |
| return ret; |
| } |
| |
| static const struct of_device_id falcon_match[] = { |
| { .compatible = "lantiq,pinctrl-falcon" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, falcon_match); |
| |
| static struct platform_driver pinctrl_falcon_driver = { |
| .probe = pinctrl_falcon_probe, |
| .driver = { |
| .name = "pinctrl-falcon", |
| .owner = THIS_MODULE, |
| .of_match_table = falcon_match, |
| }, |
| }; |
| |
| int __init pinctrl_falcon_init(void) |
| { |
| return platform_driver_register(&pinctrl_falcon_driver); |
| } |
| |
| core_initcall_sync(pinctrl_falcon_init); |