ARM: dts: msm: Enable sdhc1 and sdhc2 for sdm670 mtp and cdp
Add DT entries to support eMMC and SD card in sdm670 mtp and cdp. The
properties which are not applicable to sdm670 rumi have been either
deleted or overwritten in the rumi dtsi files.
Change-Id: Icdc32f3c6364a32ad3a4982be8c9b6f0b0c73729
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm670-cdp.dtsi b/arch/arm64/boot/dts/qcom/sdm670-cdp.dtsi
index 4f40678..5a5a7dc 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-cdp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-cdp.dtsi
@@ -35,3 +35,37 @@
&qupv3_se6_4uart {
status = "disabled";
};
+
+&sdhc_1 {
+ vdd-supply = <&pm660l_l4>;
+ qcom,vdd-voltage-level = <2960000 2960000>;
+ qcom,vdd-current-level = <200 570000>;
+
+ vdd-io-supply = <&pm660_l8>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <200 325000>;
+
+ pinctrl-names = "active", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+ status = "ok";
+};
+
+&sdhc_2 {
+ vdd-supply = <&pm660l_l5>;
+ qcom,vdd-voltage-level = <2960000 2960000>;
+ qcom,vdd-current-level = <200 800000>;
+
+ vdd-io-supply = <&pm660l_l2>;
+ qcom,vdd-io-voltage-level = <1800000 2960000>;
+ qcom,vdd-io-current-level = <200 22000>;
+
+ pinctrl-names = "active", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670-mtp.dtsi b/arch/arm64/boot/dts/qcom/sdm670-mtp.dtsi
index 4f40678..5a5a7dc 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-mtp.dtsi
@@ -35,3 +35,37 @@
&qupv3_se6_4uart {
status = "disabled";
};
+
+&sdhc_1 {
+ vdd-supply = <&pm660l_l4>;
+ qcom,vdd-voltage-level = <2960000 2960000>;
+ qcom,vdd-current-level = <200 570000>;
+
+ vdd-io-supply = <&pm660_l8>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <200 325000>;
+
+ pinctrl-names = "active", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+ status = "ok";
+};
+
+&sdhc_2 {
+ vdd-supply = <&pm660l_l5>;
+ qcom,vdd-voltage-level = <2960000 2960000>;
+ qcom,vdd-current-level = <200 800000>;
+
+ vdd-io-supply = <&pm660l_l2>;
+ qcom,vdd-io-voltage-level = <1800000 2960000>;
+ qcom,vdd-io-current-level = <200 22000>;
+
+ pinctrl-names = "active", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670-pinctrl.dtsi b/arch/arm64/boot/dts/qcom/sdm670-pinctrl.dtsi
index 73df253..a080db4 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-pinctrl.dtsi
@@ -1196,6 +1196,20 @@
};
};
+ sdc1_rclk_on: sdc1_rclk_on {
+ config {
+ pins = "sdc1_rclk";
+ bias-pull-down; /* pull down */
+ };
+ };
+
+ sdc1_rclk_off: sdc1_rclk_off {
+ config {
+ pins = "sdc1_rclk";
+ bias-pull-down; /* pull down */
+ };
+ };
+
sdc2_clk_on: sdc2_clk_on {
config {
pins = "sdc2_clk";
diff --git a/arch/arm64/boot/dts/qcom/sdm670-rumi.dtsi b/arch/arm64/boot/dts/qcom/sdm670-rumi.dtsi
index ca9d8c7..3fd9ad2 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-rumi.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-rumi.dtsi
@@ -127,6 +127,8 @@
qcom,clk-rates = <400000 20000000 25000000 50000000>;
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ /delete-property/qcom,devfreq,freq-table;
+
status = "ok";
};
@@ -146,6 +148,8 @@
qcom,clk-rates = <400000 20000000 25000000 50000000>;
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50";
+ /delete-property/qcom,devfreq,freq-table;
+
status = "ok";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 6e987f1..3025224 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -1895,6 +1895,12 @@
qcom,bus-width = <8>;
qcom,large-address-bus;
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
+ 192000000 384000000>;
+ qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
+
+ qcom,devfreq,freq-table = <50000000 200000000>;
+
clocks = <&clock_gcc GCC_SDCC1_AHB_CLK>,
<&clock_gcc GCC_SDCC1_APPS_CLK>;
clock-names = "iface_clk", "core_clk";
@@ -1916,6 +1922,12 @@
qcom,bus-width = <4>;
qcom,large-address-bus;
+ qcom,clk-rates = <400000 20000000 25000000
+ 50000000 100000000 201500000>;
+ qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50",
+ "SDR104";
+
+ qcom,devfreq,freq-table = <50000000 201500000>;
clocks = <&clock_gcc GCC_SDCC2_AHB_CLK>,
<&clock_gcc GCC_SDCC2_APPS_CLK>;
clock-names = "iface_clk", "core_clk";