drivers/net/wireless/iwlwifi/iwl-prph.h - kernel/msm-4.9 - Gitiles

 /******************************************************************************
  *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
  *
  * GPL LICENSE SUMMARY
  *
  * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  * USA
  *
  * The full GNU General Public License is included in this distribution
  * in the file called COPYING.
  *
  * Contact Information:
  *  Intel Linux Wireless <ilw@linux.intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *
  * BSD LICENSE
  *
  * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *  * Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  *  * Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
  *  * Neither the name Intel Corporation nor the names of its
  *    contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *****************************************************************************/

 #ifndef	__iwl_prph_h__
 #define __iwl_prph_h__

 /*
  * Registers in this file are internal, not PCI bus memory mapped.
  * Driver accesses these via HBUS_TARG_PRPH_* registers.
  */
 #define PRPH_BASE	(0x00000)
 #define PRPH_END	(0xFFFFF)

 /* APMG (power management) constants */
 #define APMG_BASE			(PRPH_BASE + 0x3000)
 #define APMG_CLK_CTRL_REG		(APMG_BASE + 0x0000)
 #define APMG_CLK_EN_REG			(APMG_BASE + 0x0004)
 #define APMG_CLK_DIS_REG		(APMG_BASE + 0x0008)
 #define APMG_PS_CTRL_REG		(APMG_BASE + 0x000c)
 #define APMG_PCIDEV_STT_REG		(APMG_BASE + 0x0010)
 #define APMG_RFKILL_REG			(APMG_BASE + 0x0014)
 #define APMG_RTC_INT_STT_REG		(APMG_BASE + 0x001c)
 #define APMG_RTC_INT_MSK_REG		(APMG_BASE + 0x0020)
 #define APMG_DIGITAL_SVR_REG		(APMG_BASE + 0x0058)
 #define APMG_ANALOG_SVR_REG		(APMG_BASE + 0x006C)

 #define APMS_CLK_VAL_MRB_FUNC_MODE	(0x00000001)
 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)

 #define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
 #define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
 #define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)
 #define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN		(0x00000000)
 #define APMG_PS_CTRL_VAL_PWR_SRC_VAUX		(0x02000000)
 #define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK	(0x000001E0) /* bit 8:5 */
 #define APMG_SVR_DIGITAL_VOLTAGE_1_32		(0x00000060)

 #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)

 #define APMG_RTC_INT_STT_RFKILL		(0x10000000)

 /* Device system time */
 #define DEVICE_SYSTEM_TIME_REG 0xA0206C

 /*****************************************************************************
  *                        7000/3000 series SHR DTS addresses                 *
  *****************************************************************************/

 #define SHR_MISC_WFM_DTS_EN	(0x00a10024)
 #define DTSC_CFG_MODE		(0x00a10604)
 #define DTSC_VREF_AVG		(0x00a10648)
 #define DTSC_VREF5_AVG		(0x00a1064c)
 #define DTSC_CFG_MODE_PERIODIC	(0x2)
 #define DTSC_PTAT_AVG		(0x00a10650)


 /**
  * Tx Scheduler
  *
  * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
  * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
  * host DRAM.  It steers each frame's Tx command (which contains the frame
  * data) into one of up to 7 prioritized Tx DMA FIFO channels within the
  * device.  A queue maps to only one (selectable by driver) Tx DMA channel,
  * but one DMA channel may take input from several queues.
  *
  * Tx DMA FIFOs have dedicated purposes.
  *
  * For 5000 series and up, they are used differently
  * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
  *
  * 0 -- EDCA BK (background) frames, lowest priority
  * 1 -- EDCA BE (best effort) frames, normal priority
  * 2 -- EDCA VI (video) frames, higher priority
  * 3 -- EDCA VO (voice) and management frames, highest priority
  * 4 -- unused
  * 5 -- unused
  * 6 -- unused
  * 7 -- Commands
  *
  * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
  * In addition, driver can map the remaining queues to Tx DMA/FIFO
  * channels 0-3 to support 11n aggregation via EDCA DMA channels.
  *
  * The driver sets up each queue to work in one of two modes:
  *
  * 1)  Scheduler-Ack, in which the scheduler automatically supports a
  *     block-ack (BA) window of up to 64 TFDs.  In this mode, each queue
  *     contains TFDs for a unique combination of Recipient Address (RA)
  *     and Traffic Identifier (TID), that is, traffic of a given
  *     Quality-Of-Service (QOS) priority, destined for a single station.
  *
  *     In scheduler-ack mode, the scheduler keeps track of the Tx status of
  *     each frame within the BA window, including whether it's been transmitted,
  *     and whether it's been acknowledged by the receiving station.  The device
  *     automatically processes block-acks received from the receiving STA,
  *     and reschedules un-acked frames to be retransmitted (successful
  *     Tx completion may end up being out-of-order).
  *
  *     The driver must maintain the queue's Byte Count table in host DRAM
  *     for this mode.
  *     This mode does not support fragmentation.
  *
  * 2)  FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
  *     The device may automatically retry Tx, but will retry only one frame
  *     at a time, until receiving ACK from receiving station, or reaching
  *     retry limit and giving up.
  *
  *     The command queue (#4/#9) must use this mode!
  *     This mode does not require use of the Byte Count table in host DRAM.
  *
  * Driver controls scheduler operation via 3 means:
  * 1)  Scheduler registers
  * 2)  Shared scheduler data base in internal SRAM
  * 3)  Shared data in host DRAM
  *
  * Initialization:
  *
  * When loading, driver should allocate memory for:
  * 1)  16 TFD circular buffers, each with space for (typically) 256 TFDs.
  * 2)  16 Byte Count circular buffers in 16 KBytes contiguous memory
  *     (1024 bytes for each queue).
  *
  * After receiving "Alive" response from uCode, driver must initialize
  * the scheduler (especially for queue #4/#9, the command queue, otherwise
  * the driver can't issue commands!):
  */
 #define SCD_MEM_LOWER_BOUND		(0x0000)

 /**
  * Max Tx window size is the max number of contiguous TFDs that the scheduler
  * can keep track of at one time when creating block-ack chains of frames.
  * Note that "64" matches the number of ack bits in a block-ack packet.
  */
 #define SCD_WIN_SIZE				64
 #define SCD_FRAME_LIMIT				64

 #define SCD_TXFIFO_POS_TID			(0)
 #define SCD_TXFIFO_POS_RA			(4)
 #define SCD_QUEUE_RA_TID_MAP_RATID_MSK	(0x01FF)

 /* agn SCD */
 #define SCD_QUEUE_STTS_REG_POS_TXF	(0)
 #define SCD_QUEUE_STTS_REG_POS_ACTIVE	(3)
 #define SCD_QUEUE_STTS_REG_POS_WSL	(4)
 #define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
 #define SCD_QUEUE_STTS_REG_MSK		(0x017F0000)

 #define SCD_QUEUE_CTX_REG1_CREDIT_POS		(8)
 #define SCD_QUEUE_CTX_REG1_CREDIT_MSK		(0x00FFFF00)
 #define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS	(24)
 #define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK	(0xFF000000)
 #define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS		(0)
 #define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK		(0x0000007F)
 #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS	(16)
 #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK	(0x007F0000)

 /* Context Data */
 #define SCD_CONTEXT_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x600)
 #define SCD_CONTEXT_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x6A0)

 /* Tx status */
 #define SCD_TX_STTS_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x6A0)
 #define SCD_TX_STTS_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x7E0)

 /* Translation Data */
 #define SCD_TRANS_TBL_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x7E0)
 #define SCD_TRANS_TBL_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x808)

 #define SCD_CONTEXT_QUEUE_OFFSET(x)\
 	(SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))

 #define SCD_TX_STTS_QUEUE_OFFSET(x)\
 	(SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))

 #define SCD_TRANS_TBL_OFFSET_QUEUE(x) \
 	((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)

 #define SCD_BASE			(PRPH_BASE + 0xa02c00)

 #define SCD_SRAM_BASE_ADDR	(SCD_BASE + 0x0)
 #define SCD_DRAM_BASE_ADDR	(SCD_BASE + 0x8)
 #define SCD_AIT			(SCD_BASE + 0x0c)
 #define SCD_TXFACT		(SCD_BASE + 0x10)
 #define SCD_ACTIVE		(SCD_BASE + 0x14)
 #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
 #define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)

 static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl)
 {
 	if (chnl < 20)
 		return SCD_BASE + 0x18 + chnl * 4;
 	WARN_ON_ONCE(chnl >= 32);
 	return SCD_BASE + 0x284 + (chnl - 20) * 4;
 }

 static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl)
 {
 	if (chnl < 20)
 		return SCD_BASE + 0x68 + chnl * 4;
 	WARN_ON_ONCE(chnl >= 32);
 	return SCD_BASE + 0x2B4 + (chnl - 20) * 4;
 }

 static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
 {
 	if (chnl < 20)
 		return SCD_BASE + 0x10c + chnl * 4;
 	WARN_ON_ONCE(chnl >= 32);
 	return SCD_BASE + 0x384 + (chnl - 20) * 4;
 }

 /*********************** END TX SCHEDULER *************************************/

 #endif				/* __iwl_prph_h__ */
	/******************************************************************************
	*
	* This file is provided under a dual BSD/GPLv2 license. When using or
	* redistributing this file, you may do so under either license.
	*
	* GPL LICENSE SUMMARY
	*
	* Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
	* USA
	*
	* The full GNU General Public License is included in this distribution
	* in the file called COPYING.
	*
	* Contact Information:
	* Intel Linux Wireless <ilw@linux.intel.com>
	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	*
	* BSD LICENSE
	*
	* Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*****************************************************************************/

	#ifndef __iwl_prph_h__
	#define __iwl_prph_h__

	/*
	* Registers in this file are internal, not PCI bus memory mapped.
	* Driver accesses these via HBUS_TARG_PRPH_* registers.
	*/
	#define PRPH_BASE (0x00000)
	#define PRPH_END (0xFFFFF)

	/* APMG (power management) constants */
	#define APMG_BASE (PRPH_BASE + 0x3000)
	#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
	#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
	#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
	#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
	#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
	#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
	#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
	#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
	#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
	#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)

	#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
	#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
	#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)

	#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
	#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
	#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
	#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
	#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
	#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
	#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)

	#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)

	#define APMG_RTC_INT_STT_RFKILL (0x10000000)

	/* Device system time */
	#define DEVICE_SYSTEM_TIME_REG 0xA0206C

	/*****************************************************************************
	* 7000/3000 series SHR DTS addresses *
	*****************************************************************************/

	#define SHR_MISC_WFM_DTS_EN (0x00a10024)
	#define DTSC_CFG_MODE (0x00a10604)
	#define DTSC_VREF_AVG (0x00a10648)
	#define DTSC_VREF5_AVG (0x00a1064c)
	#define DTSC_CFG_MODE_PERIODIC (0x2)
	#define DTSC_PTAT_AVG (0x00a10650)


	/**
	* Tx Scheduler
	*
	* The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
	* (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
	* host DRAM. It steers each frame's Tx command (which contains the frame
	* data) into one of up to 7 prioritized Tx DMA FIFO channels within the
	* device. A queue maps to only one (selectable by driver) Tx DMA channel,
	* but one DMA channel may take input from several queues.
	*
	* Tx DMA FIFOs have dedicated purposes.
	*
	* For 5000 series and up, they are used differently
	* (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
	*
	* 0 -- EDCA BK (background) frames, lowest priority
	* 1 -- EDCA BE (best effort) frames, normal priority
	* 2 -- EDCA VI (video) frames, higher priority
	* 3 -- EDCA VO (voice) and management frames, highest priority
	* 4 -- unused
	* 5 -- unused
	* 6 -- unused
	* 7 -- Commands
	*
	* Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
	* In addition, driver can map the remaining queues to Tx DMA/FIFO
	* channels 0-3 to support 11n aggregation via EDCA DMA channels.
	*
	* The driver sets up each queue to work in one of two modes:
	*
	* 1) Scheduler-Ack, in which the scheduler automatically supports a
	* block-ack (BA) window of up to 64 TFDs. In this mode, each queue
	* contains TFDs for a unique combination of Recipient Address (RA)
	* and Traffic Identifier (TID), that is, traffic of a given
	* Quality-Of-Service (QOS) priority, destined for a single station.
	*
	* In scheduler-ack mode, the scheduler keeps track of the Tx status of
	* each frame within the BA window, including whether it's been transmitted,
	* and whether it's been acknowledged by the receiving station. The device
	* automatically processes block-acks received from the receiving STA,
	* and reschedules un-acked frames to be retransmitted (successful
	* Tx completion may end up being out-of-order).
	*
	* The driver must maintain the queue's Byte Count table in host DRAM
	* for this mode.
	* This mode does not support fragmentation.
	*
	* 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
	* The device may automatically retry Tx, but will retry only one frame
	* at a time, until receiving ACK from receiving station, or reaching
	* retry limit and giving up.
	*
	* The command queue (#4/#9) must use this mode!
	* This mode does not require use of the Byte Count table in host DRAM.
	*
	* Driver controls scheduler operation via 3 means:
	* 1) Scheduler registers
	* 2) Shared scheduler data base in internal SRAM
	* 3) Shared data in host DRAM
	*
	* Initialization:
	*
	* When loading, driver should allocate memory for:
	* 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs.
	* 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory
	* (1024 bytes for each queue).
	*
	* After receiving "Alive" response from uCode, driver must initialize
	* the scheduler (especially for queue #4/#9, the command queue, otherwise
	* the driver can't issue commands!):
	*/
	#define SCD_MEM_LOWER_BOUND (0x0000)

	/**
	* Max Tx window size is the max number of contiguous TFDs that the scheduler
	* can keep track of at one time when creating block-ack chains of frames.
	* Note that "64" matches the number of ack bits in a block-ack packet.
	*/
	#define SCD_WIN_SIZE 64
	#define SCD_FRAME_LIMIT 64

	#define SCD_TXFIFO_POS_TID (0)
	#define SCD_TXFIFO_POS_RA (4)
	#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)

	/* agn SCD */
	#define SCD_QUEUE_STTS_REG_POS_TXF (0)
	#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
	#define SCD_QUEUE_STTS_REG_POS_WSL (4)
	#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
	#define SCD_QUEUE_STTS_REG_MSK (0x017F0000)

	#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
	#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
	#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
	#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
	#define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
	#define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
	#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
	#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)

	/* Context Data */
	#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600)
	#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)

	/* Tx status */
	#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
	#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)

	/* Translation Data */
	#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
	#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808)

	#define SCD_CONTEXT_QUEUE_OFFSET(x)\
	(SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))

	#define SCD_TX_STTS_QUEUE_OFFSET(x)\
	(SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))

	#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \
	((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)

	#define SCD_BASE (PRPH_BASE + 0xa02c00)

	#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0)
	#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8)
	#define SCD_AIT (SCD_BASE + 0x0c)
	#define SCD_TXFACT (SCD_BASE + 0x10)
	#define SCD_ACTIVE (SCD_BASE + 0x14)
	#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
	#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
	#define SCD_AGGR_SEL (SCD_BASE + 0x248)
	#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)

	static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl)
	{
	if (chnl < 20)
	return SCD_BASE + 0x18 + chnl * 4;
	WARN_ON_ONCE(chnl >= 32);
	return SCD_BASE + 0x284 + (chnl - 20) * 4;
	}

	static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl)
	{
	if (chnl < 20)
	return SCD_BASE + 0x68 + chnl * 4;
	WARN_ON_ONCE(chnl >= 32);
	return SCD_BASE + 0x2B4 + (chnl - 20) * 4;
	}

	static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
	{
	if (chnl < 20)
	return SCD_BASE + 0x10c + chnl * 4;
	WARN_ON_ONCE(chnl >= 32);
	return SCD_BASE + 0x384 + (chnl - 20) * 4;
	}

	/********************* END TX SCHEDULER ***********************************/

	#endif /* __iwl_prph_h__ */