| /* |
| * Copyright (C) 2015 Free Electrons |
| * Copyright (C) 2015 NextThing Co |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_plane_helper.h> |
| |
| #include <linux/component.h> |
| #include <linux/reset.h> |
| |
| #include "sun4i_backend.h" |
| #include "sun4i_drv.h" |
| |
| static u32 sunxi_rgb2yuv_coef[12] = { |
| 0x00000107, 0x00000204, 0x00000064, 0x00000108, |
| 0x00003f69, 0x00003ed6, 0x000001c1, 0x00000808, |
| 0x000001c1, 0x00003e88, 0x00003fb8, 0x00000808 |
| }; |
| |
| void sun4i_backend_apply_color_correction(struct sun4i_backend *backend) |
| { |
| int i; |
| |
| DRM_DEBUG_DRIVER("Applying RGB to YUV color correction\n"); |
| |
| /* Set color correction */ |
| regmap_write(backend->regs, SUN4I_BACKEND_OCCTL_REG, |
| SUN4I_BACKEND_OCCTL_ENABLE); |
| |
| for (i = 0; i < 12; i++) |
| regmap_write(backend->regs, SUN4I_BACKEND_OCRCOEF_REG(i), |
| sunxi_rgb2yuv_coef[i]); |
| } |
| EXPORT_SYMBOL(sun4i_backend_apply_color_correction); |
| |
| void sun4i_backend_disable_color_correction(struct sun4i_backend *backend) |
| { |
| DRM_DEBUG_DRIVER("Disabling color correction\n"); |
| |
| /* Disable color correction */ |
| regmap_update_bits(backend->regs, SUN4I_BACKEND_OCCTL_REG, |
| SUN4I_BACKEND_OCCTL_ENABLE, 0); |
| } |
| EXPORT_SYMBOL(sun4i_backend_disable_color_correction); |
| |
| void sun4i_backend_commit(struct sun4i_backend *backend) |
| { |
| DRM_DEBUG_DRIVER("Committing changes\n"); |
| |
| regmap_write(backend->regs, SUN4I_BACKEND_REGBUFFCTL_REG, |
| SUN4I_BACKEND_REGBUFFCTL_AUTOLOAD_DIS | |
| SUN4I_BACKEND_REGBUFFCTL_LOADCTL); |
| } |
| EXPORT_SYMBOL(sun4i_backend_commit); |
| |
| void sun4i_backend_layer_enable(struct sun4i_backend *backend, |
| int layer, bool enable) |
| { |
| u32 val; |
| |
| DRM_DEBUG_DRIVER("Enabling layer %d\n", layer); |
| |
| if (enable) |
| val = SUN4I_BACKEND_MODCTL_LAY_EN(layer); |
| else |
| val = 0; |
| |
| regmap_update_bits(backend->regs, SUN4I_BACKEND_MODCTL_REG, |
| SUN4I_BACKEND_MODCTL_LAY_EN(layer), val); |
| } |
| EXPORT_SYMBOL(sun4i_backend_layer_enable); |
| |
| static int sun4i_backend_drm_format_to_layer(struct drm_plane *plane, |
| u32 format, u32 *mode) |
| { |
| if ((plane->type == DRM_PLANE_TYPE_PRIMARY) && |
| (format == DRM_FORMAT_ARGB8888)) |
| format = DRM_FORMAT_XRGB8888; |
| |
| switch (format) { |
| case DRM_FORMAT_ARGB8888: |
| *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB8888; |
| break; |
| |
| case DRM_FORMAT_XRGB8888: |
| *mode = SUN4I_BACKEND_LAY_FBFMT_XRGB8888; |
| break; |
| |
| case DRM_FORMAT_RGB888: |
| *mode = SUN4I_BACKEND_LAY_FBFMT_RGB888; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int sun4i_backend_update_layer_coord(struct sun4i_backend *backend, |
| int layer, struct drm_plane *plane) |
| { |
| struct drm_plane_state *state = plane->state; |
| struct drm_framebuffer *fb = state->fb; |
| |
| DRM_DEBUG_DRIVER("Updating layer %d\n", layer); |
| |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) { |
| DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", |
| state->crtc_w, state->crtc_h); |
| regmap_write(backend->regs, SUN4I_BACKEND_DISSIZE_REG, |
| SUN4I_BACKEND_DISSIZE(state->crtc_w, |
| state->crtc_h)); |
| } |
| |
| /* Set the line width */ |
| DRM_DEBUG_DRIVER("Layer line width: %d bits\n", fb->pitches[0] * 8); |
| regmap_write(backend->regs, SUN4I_BACKEND_LAYLINEWIDTH_REG(layer), |
| fb->pitches[0] * 8); |
| |
| /* Set height and width */ |
| DRM_DEBUG_DRIVER("Layer size W: %u H: %u\n", |
| state->crtc_w, state->crtc_h); |
| regmap_write(backend->regs, SUN4I_BACKEND_LAYSIZE_REG(layer), |
| SUN4I_BACKEND_LAYSIZE(state->crtc_w, |
| state->crtc_h)); |
| |
| /* Set base coordinates */ |
| DRM_DEBUG_DRIVER("Layer coordinates X: %d Y: %d\n", |
| state->crtc_x, state->crtc_y); |
| regmap_write(backend->regs, SUN4I_BACKEND_LAYCOOR_REG(layer), |
| SUN4I_BACKEND_LAYCOOR(state->crtc_x, |
| state->crtc_y)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sun4i_backend_update_layer_coord); |
| |
| int sun4i_backend_update_layer_formats(struct sun4i_backend *backend, |
| int layer, struct drm_plane *plane) |
| { |
| struct drm_plane_state *state = plane->state; |
| struct drm_framebuffer *fb = state->fb; |
| bool interlaced = false; |
| u32 val; |
| int ret; |
| |
| if (plane->state->crtc) |
| interlaced = plane->state->crtc->state->adjusted_mode.flags |
| & DRM_MODE_FLAG_INTERLACE; |
| |
| regmap_update_bits(backend->regs, SUN4I_BACKEND_MODCTL_REG, |
| SUN4I_BACKEND_MODCTL_ITLMOD_EN, |
| interlaced ? SUN4I_BACKEND_MODCTL_ITLMOD_EN : 0); |
| |
| DRM_DEBUG_DRIVER("Switching display backend interlaced mode %s\n", |
| interlaced ? "on" : "off"); |
| |
| ret = sun4i_backend_drm_format_to_layer(plane, fb->pixel_format, &val); |
| if (ret) { |
| DRM_DEBUG_DRIVER("Invalid format\n"); |
| return ret; |
| } |
| |
| regmap_update_bits(backend->regs, SUN4I_BACKEND_ATTCTL_REG1(layer), |
| SUN4I_BACKEND_ATTCTL_REG1_LAY_FBFMT, val); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sun4i_backend_update_layer_formats); |
| |
| int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, |
| int layer, struct drm_plane *plane) |
| { |
| struct drm_plane_state *state = plane->state; |
| struct drm_framebuffer *fb = state->fb; |
| struct drm_gem_cma_object *gem; |
| u32 lo_paddr, hi_paddr; |
| dma_addr_t paddr; |
| int bpp; |
| |
| /* Get the physical address of the buffer in memory */ |
| gem = drm_fb_cma_get_gem_obj(fb, 0); |
| |
| DRM_DEBUG_DRIVER("Using GEM @ %pad\n", &gem->paddr); |
| |
| /* Compute the start of the displayed memory */ |
| bpp = drm_format_plane_cpp(fb->pixel_format, 0); |
| paddr = gem->paddr + fb->offsets[0]; |
| paddr += (state->src_x >> 16) * bpp; |
| paddr += (state->src_y >> 16) * fb->pitches[0]; |
| |
| DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr); |
| |
| /* Write the 32 lower bits of the address (in bits) */ |
| lo_paddr = paddr << 3; |
| DRM_DEBUG_DRIVER("Setting address lower bits to 0x%x\n", lo_paddr); |
| regmap_write(backend->regs, SUN4I_BACKEND_LAYFB_L32ADD_REG(layer), |
| lo_paddr); |
| |
| /* And the upper bits */ |
| hi_paddr = paddr >> 29; |
| DRM_DEBUG_DRIVER("Setting address high bits to 0x%x\n", hi_paddr); |
| regmap_update_bits(backend->regs, SUN4I_BACKEND_LAYFB_H4ADD_REG, |
| SUN4I_BACKEND_LAYFB_H4ADD_MSK(layer), |
| SUN4I_BACKEND_LAYFB_H4ADD(layer, hi_paddr)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sun4i_backend_update_layer_buffer); |
| |
| static int sun4i_backend_init_sat(struct device *dev) { |
| struct sun4i_backend *backend = dev_get_drvdata(dev); |
| int ret; |
| |
| backend->sat_reset = devm_reset_control_get(dev, "sat"); |
| if (IS_ERR(backend->sat_reset)) { |
| dev_err(dev, "Couldn't get the SAT reset line\n"); |
| return PTR_ERR(backend->sat_reset); |
| } |
| |
| ret = reset_control_deassert(backend->sat_reset); |
| if (ret) { |
| dev_err(dev, "Couldn't deassert the SAT reset line\n"); |
| return ret; |
| } |
| |
| backend->sat_clk = devm_clk_get(dev, "sat"); |
| if (IS_ERR(backend->sat_clk)) { |
| dev_err(dev, "Couldn't get our SAT clock\n"); |
| ret = PTR_ERR(backend->sat_clk); |
| goto err_assert_reset; |
| } |
| |
| ret = clk_prepare_enable(backend->sat_clk); |
| if (ret) { |
| dev_err(dev, "Couldn't enable the SAT clock\n"); |
| return ret; |
| } |
| |
| return 0; |
| |
| err_assert_reset: |
| reset_control_assert(backend->sat_reset); |
| return ret; |
| } |
| |
| static int sun4i_backend_free_sat(struct device *dev) { |
| struct sun4i_backend *backend = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(backend->sat_clk); |
| reset_control_assert(backend->sat_reset); |
| |
| return 0; |
| } |
| |
| static struct regmap_config sun4i_backend_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x5800, |
| }; |
| |
| static int sun4i_backend_bind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct drm_device *drm = data; |
| struct sun4i_drv *drv = drm->dev_private; |
| struct sun4i_backend *backend; |
| struct resource *res; |
| void __iomem *regs; |
| int i, ret; |
| |
| backend = devm_kzalloc(dev, sizeof(*backend), GFP_KERNEL); |
| if (!backend) |
| return -ENOMEM; |
| dev_set_drvdata(dev, backend); |
| drv->backend = backend; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| backend->regs = devm_regmap_init_mmio(dev, regs, |
| &sun4i_backend_regmap_config); |
| if (IS_ERR(backend->regs)) { |
| dev_err(dev, "Couldn't create the backend0 regmap\n"); |
| return PTR_ERR(backend->regs); |
| } |
| |
| backend->reset = devm_reset_control_get(dev, NULL); |
| if (IS_ERR(backend->reset)) { |
| dev_err(dev, "Couldn't get our reset line\n"); |
| return PTR_ERR(backend->reset); |
| } |
| |
| ret = reset_control_deassert(backend->reset); |
| if (ret) { |
| dev_err(dev, "Couldn't deassert our reset line\n"); |
| return ret; |
| } |
| |
| backend->bus_clk = devm_clk_get(dev, "ahb"); |
| if (IS_ERR(backend->bus_clk)) { |
| dev_err(dev, "Couldn't get the backend bus clock\n"); |
| ret = PTR_ERR(backend->bus_clk); |
| goto err_assert_reset; |
| } |
| clk_prepare_enable(backend->bus_clk); |
| |
| backend->mod_clk = devm_clk_get(dev, "mod"); |
| if (IS_ERR(backend->mod_clk)) { |
| dev_err(dev, "Couldn't get the backend module clock\n"); |
| ret = PTR_ERR(backend->mod_clk); |
| goto err_disable_bus_clk; |
| } |
| clk_prepare_enable(backend->mod_clk); |
| |
| backend->ram_clk = devm_clk_get(dev, "ram"); |
| if (IS_ERR(backend->ram_clk)) { |
| dev_err(dev, "Couldn't get the backend RAM clock\n"); |
| ret = PTR_ERR(backend->ram_clk); |
| goto err_disable_mod_clk; |
| } |
| clk_prepare_enable(backend->ram_clk); |
| |
| if (of_device_is_compatible(dev->of_node, |
| "allwinner,sun8i-a33-display-backend")) { |
| ret = sun4i_backend_init_sat(dev); |
| if (ret) { |
| dev_err(dev, "Couldn't init SAT resources\n"); |
| goto err_disable_ram_clk; |
| } |
| } |
| |
| /* Reset the registers */ |
| for (i = 0x800; i < 0x1000; i += 4) |
| regmap_write(backend->regs, i, 0); |
| |
| /* Disable registers autoloading */ |
| regmap_write(backend->regs, SUN4I_BACKEND_REGBUFFCTL_REG, |
| SUN4I_BACKEND_REGBUFFCTL_AUTOLOAD_DIS); |
| |
| /* Enable the backend */ |
| regmap_write(backend->regs, SUN4I_BACKEND_MODCTL_REG, |
| SUN4I_BACKEND_MODCTL_DEBE_EN | |
| SUN4I_BACKEND_MODCTL_START_CTL); |
| |
| return 0; |
| |
| err_disable_ram_clk: |
| clk_disable_unprepare(backend->ram_clk); |
| err_disable_mod_clk: |
| clk_disable_unprepare(backend->mod_clk); |
| err_disable_bus_clk: |
| clk_disable_unprepare(backend->bus_clk); |
| err_assert_reset: |
| reset_control_assert(backend->reset); |
| return ret; |
| } |
| |
| static void sun4i_backend_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct sun4i_backend *backend = dev_get_drvdata(dev); |
| |
| if (of_device_is_compatible(dev->of_node, |
| "allwinner,sun8i-a33-display-backend")) |
| sun4i_backend_free_sat(dev); |
| |
| clk_disable_unprepare(backend->ram_clk); |
| clk_disable_unprepare(backend->mod_clk); |
| clk_disable_unprepare(backend->bus_clk); |
| reset_control_assert(backend->reset); |
| } |
| |
| static struct component_ops sun4i_backend_ops = { |
| .bind = sun4i_backend_bind, |
| .unbind = sun4i_backend_unbind, |
| }; |
| |
| static int sun4i_backend_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &sun4i_backend_ops); |
| } |
| |
| static int sun4i_backend_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &sun4i_backend_ops); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sun4i_backend_of_table[] = { |
| { .compatible = "allwinner,sun5i-a13-display-backend" }, |
| { .compatible = "allwinner,sun6i-a31-display-backend" }, |
| { .compatible = "allwinner,sun8i-a33-display-backend" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sun4i_backend_of_table); |
| |
| static struct platform_driver sun4i_backend_platform_driver = { |
| .probe = sun4i_backend_probe, |
| .remove = sun4i_backend_remove, |
| .driver = { |
| .name = "sun4i-backend", |
| .of_match_table = sun4i_backend_of_table, |
| }, |
| }; |
| module_platform_driver(sun4i_backend_platform_driver); |
| |
| MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); |
| MODULE_DESCRIPTION("Allwinner A10 Display Backend Driver"); |
| MODULE_LICENSE("GPL"); |