| /* |
| * ChromeOS EC keyboard driver |
| * |
| * Copyright (C) 2012 Google, Inc |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * This driver uses the Chrome OS EC byte-level message-based protocol for |
| * communicating the keyboard state (which keys are pressed) from a keyboard EC |
| * to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing, |
| * but everything else (including deghosting) is done here. The main |
| * motivation for this is to keep the EC firmware as simple as possible, since |
| * it cannot be easily upgraded and EC flash/IRAM space is relatively |
| * expensive. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/kernel.h> |
| #include <linux/notifier.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/mfd/cros_ec.h> |
| #include <linux/mfd/cros_ec_commands.h> |
| |
| /* |
| * @rows: Number of rows in the keypad |
| * @cols: Number of columns in the keypad |
| * @row_shift: log2 or number of rows, rounded up |
| * @keymap_data: Matrix keymap data used to convert to keyscan values |
| * @ghost_filter: true to enable the matrix key-ghosting filter |
| * @dev: Device pointer |
| * @idev: Input device |
| * @ec: Top level ChromeOS device to use to talk to EC |
| * @event_notifier: interrupt event notifier for transport devices |
| */ |
| struct cros_ec_keyb { |
| unsigned int rows; |
| unsigned int cols; |
| int row_shift; |
| const struct matrix_keymap_data *keymap_data; |
| bool ghost_filter; |
| |
| struct device *dev; |
| struct input_dev *idev; |
| struct cros_ec_device *ec; |
| struct notifier_block notifier; |
| }; |
| |
| |
| static bool cros_ec_keyb_row_has_ghosting(struct cros_ec_keyb *ckdev, |
| uint8_t *buf, int row) |
| { |
| int pressed_in_row = 0; |
| int row_has_teeth = 0; |
| int col, mask; |
| |
| mask = 1 << row; |
| for (col = 0; col < ckdev->cols; col++) { |
| if (buf[col] & mask) { |
| pressed_in_row++; |
| row_has_teeth |= buf[col] & ~mask; |
| if (pressed_in_row > 1 && row_has_teeth) { |
| /* ghosting */ |
| dev_dbg(ckdev->dev, |
| "ghost found at: r%d c%d, pressed %d, teeth 0x%x\n", |
| row, col, pressed_in_row, |
| row_has_teeth); |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| /* |
| * Returns true when there is at least one combination of pressed keys that |
| * results in ghosting. |
| */ |
| static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf) |
| { |
| int row; |
| |
| /* |
| * Ghosting happens if for any pressed key X there are other keys |
| * pressed both in the same row and column of X as, for instance, |
| * in the following diagram: |
| * |
| * . . Y . g . |
| * . . . . . . |
| * . . . . . . |
| * . . X . Z . |
| * |
| * In this case only X, Y, and Z are pressed, but g appears to be |
| * pressed too (see Wikipedia). |
| * |
| * We can detect ghosting in a single pass (*) over the keyboard state |
| * by maintaining two arrays. pressed_in_row counts how many pressed |
| * keys we have found in a row. row_has_teeth is true if any of the |
| * pressed keys for this row has other pressed keys in its column. If |
| * at any point of the scan we find that a row has multiple pressed |
| * keys, and at least one of them is at the intersection with a column |
| * with multiple pressed keys, we're sure there is ghosting. |
| * Conversely, if there is ghosting, we will detect such situation for |
| * at least one key during the pass. |
| * |
| * (*) This looks linear in the number of keys, but it's not. We can |
| * cheat because the number of rows is small. |
| */ |
| for (row = 0; row < ckdev->rows; row++) |
| if (cros_ec_keyb_row_has_ghosting(ckdev, buf, row)) |
| return true; |
| |
| return false; |
| } |
| |
| /* |
| * Compares the new keyboard state to the old one and produces key |
| * press/release events accordingly. The keyboard state is 13 bytes (one byte |
| * per column) |
| */ |
| static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev, |
| uint8_t *kb_state, int len) |
| { |
| struct input_dev *idev = ckdev->idev; |
| int col, row; |
| int new_state; |
| int num_cols; |
| |
| num_cols = len; |
| |
| if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) { |
| /* |
| * Simple-minded solution: ignore this state. The obvious |
| * improvement is to only ignore changes to keys involved in |
| * the ghosting, but process the other changes. |
| */ |
| dev_dbg(ckdev->dev, "ghosting found\n"); |
| return; |
| } |
| |
| for (col = 0; col < ckdev->cols; col++) { |
| for (row = 0; row < ckdev->rows; row++) { |
| int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift); |
| const unsigned short *keycodes = idev->keycode; |
| int code; |
| |
| code = keycodes[pos]; |
| new_state = kb_state[col] & (1 << row); |
| if (!!new_state != test_bit(code, idev->key)) { |
| dev_dbg(ckdev->dev, |
| "changed: [r%d c%d]: byte %02x\n", |
| row, col, new_state); |
| |
| input_report_key(idev, code, new_state); |
| } |
| } |
| } |
| input_sync(ckdev->idev); |
| } |
| |
| static int cros_ec_keyb_open(struct input_dev *dev) |
| { |
| struct cros_ec_keyb *ckdev = input_get_drvdata(dev); |
| |
| return blocking_notifier_chain_register(&ckdev->ec->event_notifier, |
| &ckdev->notifier); |
| } |
| |
| static void cros_ec_keyb_close(struct input_dev *dev) |
| { |
| struct cros_ec_keyb *ckdev = input_get_drvdata(dev); |
| |
| blocking_notifier_chain_unregister(&ckdev->ec->event_notifier, |
| &ckdev->notifier); |
| } |
| |
| static int cros_ec_keyb_get_state(struct cros_ec_keyb *ckdev, uint8_t *kb_state) |
| { |
| return ckdev->ec->command_recv(ckdev->ec, EC_CMD_MKBP_STATE, |
| kb_state, ckdev->cols); |
| } |
| |
| static int cros_ec_keyb_work(struct notifier_block *nb, |
| unsigned long state, void *_notify) |
| { |
| int ret; |
| struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb, |
| notifier); |
| uint8_t kb_state[ckdev->cols]; |
| |
| ret = cros_ec_keyb_get_state(ckdev, kb_state); |
| if (ret >= 0) |
| cros_ec_keyb_process(ckdev, kb_state, ret); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int cros_ec_keyb_probe(struct platform_device *pdev) |
| { |
| struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); |
| struct device *dev = ec->dev; |
| struct cros_ec_keyb *ckdev; |
| struct input_dev *idev; |
| struct device_node *np; |
| int err; |
| |
| np = pdev->dev.of_node; |
| if (!np) |
| return -ENODEV; |
| |
| ckdev = devm_kzalloc(&pdev->dev, sizeof(*ckdev), GFP_KERNEL); |
| if (!ckdev) |
| return -ENOMEM; |
| err = matrix_keypad_parse_of_params(&pdev->dev, &ckdev->rows, |
| &ckdev->cols); |
| if (err) |
| return err; |
| |
| idev = devm_input_allocate_device(&pdev->dev); |
| if (!idev) |
| return -ENOMEM; |
| |
| ckdev->ec = ec; |
| ckdev->notifier.notifier_call = cros_ec_keyb_work; |
| ckdev->dev = dev; |
| dev_set_drvdata(&pdev->dev, ckdev); |
| |
| idev->name = ec->ec_name; |
| idev->phys = ec->phys_name; |
| __set_bit(EV_REP, idev->evbit); |
| |
| idev->id.bustype = BUS_VIRTUAL; |
| idev->id.version = 1; |
| idev->id.product = 0; |
| idev->dev.parent = &pdev->dev; |
| idev->open = cros_ec_keyb_open; |
| idev->close = cros_ec_keyb_close; |
| |
| ckdev->ghost_filter = of_property_read_bool(np, |
| "google,needs-ghost-filter"); |
| |
| err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols, |
| NULL, idev); |
| if (err) { |
| dev_err(dev, "cannot build key matrix\n"); |
| return err; |
| } |
| |
| ckdev->row_shift = get_count_order(ckdev->cols); |
| |
| input_set_capability(idev, EV_MSC, MSC_SCAN); |
| input_set_drvdata(idev, ckdev); |
| ckdev->idev = idev; |
| err = input_register_device(ckdev->idev); |
| if (err) { |
| dev_err(dev, "cannot register input device\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| /* Clear any keys in the buffer */ |
| static void cros_ec_keyb_clear_keyboard(struct cros_ec_keyb *ckdev) |
| { |
| uint8_t old_state[ckdev->cols]; |
| uint8_t new_state[ckdev->cols]; |
| unsigned long duration; |
| int i, ret; |
| |
| /* |
| * Keep reading until we see that the scan state does not change. |
| * That indicates that we are done. |
| * |
| * Assume that the EC keyscan buffer is at most 32 deep. |
| */ |
| duration = jiffies; |
| ret = cros_ec_keyb_get_state(ckdev, new_state); |
| for (i = 1; !ret && i < 32; i++) { |
| memcpy(old_state, new_state, sizeof(old_state)); |
| ret = cros_ec_keyb_get_state(ckdev, new_state); |
| if (0 == memcmp(old_state, new_state, sizeof(old_state))) |
| break; |
| } |
| duration = jiffies - duration; |
| dev_info(ckdev->dev, "Discarded %d keyscan(s) in %dus\n", i, |
| jiffies_to_usecs(duration)); |
| } |
| |
| static int cros_ec_keyb_resume(struct device *dev) |
| { |
| struct cros_ec_keyb *ckdev = dev_get_drvdata(dev); |
| |
| /* |
| * When the EC is not a wake source, then it could not have caused the |
| * resume, so we clear the EC's key scan buffer. If the EC was a |
| * wake source (e.g. the lid is open and the user might press a key to |
| * wake) then the key scan buffer should be preserved. |
| */ |
| if (ckdev->ec->was_wake_device) |
| cros_ec_keyb_clear_keyboard(ckdev); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); |
| |
| static struct platform_driver cros_ec_keyb_driver = { |
| .probe = cros_ec_keyb_probe, |
| .driver = { |
| .name = "cros-ec-keyb", |
| .pm = &cros_ec_keyb_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(cros_ec_keyb_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("ChromeOS EC keyboard driver"); |
| MODULE_ALIAS("platform:cros-ec-keyb"); |