| /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/usb/msm_hsusb.h> |
| #include <linux/err.h> |
| #include <linux/clkdev.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/io.h> |
| #include <asm/setup.h> |
| |
| #include <mach/board.h> |
| #include <mach/irqs.h> |
| #include <mach/sirc.h> |
| #include <mach/vreg.h> |
| #include <linux/platform_data/mmc-msm_sdcc.h> |
| |
| #include "devices.h" |
| #include "common.h" |
| |
| static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300; |
| static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156; |
| |
| /* Leave smc91x resources empty here, as we'll fill them in |
| * at run-time: they vary from board to board, and the true |
| * configuration won't be known until boot. |
| */ |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| static int __init msm_init_smc91x(void) |
| { |
| if (machine_is_qsd8x50_surf()) { |
| smc91x_resources[0].start = qsd8x50_surf_smc91x_base; |
| smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; |
| smc91x_resources[1].start = |
| gpio_to_irq(qsd8x50_surf_smc91x_gpio); |
| smc91x_resources[1].end = |
| gpio_to_irq(qsd8x50_surf_smc91x_gpio); |
| platform_device_register(&smc91x_device); |
| } |
| |
| return 0; |
| } |
| module_init(msm_init_smc91x); |
| |
| static int hsusb_phy_init_seq[] = { |
| 0x08, 0x31, /* Increase HS Driver Amplitude */ |
| 0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */ |
| -1 |
| }; |
| |
| static struct msm_otg_platform_data msm_otg_pdata = { |
| .phy_init_seq = hsusb_phy_init_seq, |
| .mode = USB_PERIPHERAL, |
| .otg_control = OTG_PHY_CONTROL, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &msm_device_gpio_8x50, |
| &msm_device_uart3, |
| &msm_device_smd, |
| &msm_device_otg, |
| &msm_device_hsusb, |
| &msm_device_hsusb_host, |
| }; |
| |
| static struct msm_mmc_gpio sdc1_gpio_cfg[] = { |
| {51, "sdc1_dat_3"}, |
| {52, "sdc1_dat_2"}, |
| {53, "sdc1_dat_1"}, |
| {54, "sdc1_dat_0"}, |
| {55, "sdc1_cmd"}, |
| {56, "sdc1_clk"} |
| }; |
| |
| static struct vreg *vreg_mmc; |
| static unsigned long vreg_sts; |
| |
| static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd) |
| { |
| int rc = 0; |
| struct platform_device *pdev; |
| |
| pdev = container_of(dv, struct platform_device, dev); |
| |
| if (vdd == 0) { |
| if (!vreg_sts) |
| return 0; |
| |
| clear_bit(pdev->id, &vreg_sts); |
| |
| if (!vreg_sts) { |
| rc = vreg_disable(vreg_mmc); |
| if (rc) |
| pr_err("vreg_mmc disable failed for slot " |
| "%d: %d\n", pdev->id, rc); |
| } |
| return 0; |
| } |
| |
| if (!vreg_sts) { |
| rc = vreg_set_level(vreg_mmc, 2900); |
| if (rc) |
| pr_err("vreg_mmc set level failed for slot %d: %d\n", |
| pdev->id, rc); |
| rc = vreg_enable(vreg_mmc); |
| if (rc) |
| pr_err("vreg_mmc enable failed for slot %d: %d\n", |
| pdev->id, rc); |
| } |
| set_bit(pdev->id, &vreg_sts); |
| return 0; |
| } |
| |
| static struct msm_mmc_gpio_data sdc1_gpio = { |
| .gpio = sdc1_gpio_cfg, |
| .size = ARRAY_SIZE(sdc1_gpio_cfg), |
| }; |
| |
| static struct msm_mmc_platform_data qsd8x50_sdc1_data = { |
| .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, |
| .translate_vdd = msm_sdcc_setup_power, |
| .gpio_data = &sdc1_gpio, |
| }; |
| |
| static void __init qsd8x50_init_mmc(void) |
| { |
| vreg_mmc = vreg_get(NULL, "gp5"); |
| |
| if (IS_ERR(vreg_mmc)) { |
| pr_err("vreg get for vreg_mmc failed (%ld)\n", |
| PTR_ERR(vreg_mmc)); |
| return; |
| } |
| |
| msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0); |
| } |
| |
| static void __init qsd8x50_map_io(void) |
| { |
| msm_map_qsd8x50_io(); |
| msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50); |
| } |
| |
| static void __init qsd8x50_init_irq(void) |
| { |
| msm_init_irq(); |
| msm_init_sirc(); |
| } |
| |
| static void __init qsd8x50_init(void) |
| { |
| msm_device_otg.dev.platform_data = &msm_otg_pdata; |
| msm_device_hsusb.dev.parent = &msm_device_otg.dev; |
| msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| qsd8x50_init_mmc(); |
| } |
| |
| static void __init qsd8x50_init_late(void) |
| { |
| smd_debugfs_init(); |
| } |
| |
| MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") |
| .atag_offset = 0x100, |
| .map_io = qsd8x50_map_io, |
| .init_irq = qsd8x50_init_irq, |
| .init_machine = qsd8x50_init, |
| .init_late = qsd8x50_init_late, |
| .init_time = qsd8x50_timer_init, |
| MACHINE_END |
| |
| MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") |
| .atag_offset = 0x100, |
| .map_io = qsd8x50_map_io, |
| .init_irq = qsd8x50_init_irq, |
| .init_machine = qsd8x50_init, |
| .init_late = qsd8x50_init_late, |
| .init_time = qsd8x50_timer_init, |
| MACHINE_END |