| /* |
| * Serial Port driver for Open Firmware platform devices |
| * |
| * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/serial_core.h> |
| #include <linux/serial_8250.h> |
| |
| #include <asm/of_platform.h> |
| #include <asm/prom.h> |
| |
| struct of_serial_info { |
| int type; |
| int line; |
| }; |
| |
| /* |
| * Fill a struct uart_port for a given device node |
| */ |
| static int __devinit of_platform_serial_setup(struct of_device *ofdev, |
| int type, struct uart_port *port) |
| { |
| struct resource resource; |
| struct device_node *np = ofdev->node; |
| const unsigned int *clk, *spd; |
| int ret; |
| |
| memset(port, 0, sizeof *port); |
| spd = of_get_property(np, "current-speed", NULL); |
| clk = of_get_property(np, "clock-frequency", NULL); |
| if (!clk) { |
| dev_warn(&ofdev->dev, "no clock-frequency property set\n"); |
| return -ENODEV; |
| } |
| |
| ret = of_address_to_resource(np, 0, &resource); |
| if (ret) { |
| dev_warn(&ofdev->dev, "invalid address\n"); |
| return ret; |
| } |
| |
| spin_lock_init(&port->lock); |
| port->mapbase = resource.start; |
| port->irq = irq_of_parse_and_map(np, 0); |
| port->iotype = UPIO_MEM; |
| port->type = type; |
| port->uartclk = *clk; |
| port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
| | UPF_FIXED_PORT; |
| port->dev = &ofdev->dev; |
| port->custom_divisor = *clk / (16 * (*spd)); |
| |
| return 0; |
| } |
| |
| /* |
| * Try to register a serial port |
| */ |
| static int __devinit of_platform_serial_probe(struct of_device *ofdev, |
| const struct of_device_id *id) |
| { |
| struct of_serial_info *info; |
| struct uart_port port; |
| int port_type; |
| int ret; |
| |
| if (of_find_property(ofdev->node, "used-by-rtas", NULL)) |
| return -EBUSY; |
| |
| info = kmalloc(sizeof(*info), GFP_KERNEL); |
| if (info == NULL) |
| return -ENOMEM; |
| |
| port_type = (unsigned long)id->data; |
| ret = of_platform_serial_setup(ofdev, port_type, &port); |
| if (ret) |
| goto out; |
| |
| switch (port_type) { |
| case PORT_8250 ... PORT_MAX_8250: |
| ret = serial8250_register_port(&port); |
| break; |
| default: |
| /* need to add code for these */ |
| case PORT_UNKNOWN: |
| dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); |
| ret = -ENODEV; |
| break; |
| } |
| if (ret < 0) |
| goto out; |
| |
| info->type = port_type; |
| info->line = ret; |
| ofdev->dev.driver_data = info; |
| return 0; |
| out: |
| kfree(info); |
| irq_dispose_mapping(port.irq); |
| return ret; |
| } |
| |
| /* |
| * Release a line |
| */ |
| static int of_platform_serial_remove(struct of_device *ofdev) |
| { |
| struct of_serial_info *info = ofdev->dev.driver_data; |
| switch (info->type) { |
| case PORT_8250 ... PORT_MAX_8250: |
| serial8250_unregister_port(info->line); |
| break; |
| default: |
| /* need to add code for these */ |
| break; |
| } |
| kfree(info); |
| return 0; |
| } |
| |
| /* |
| * A few common types, add more as needed. |
| */ |
| static struct of_device_id __devinitdata of_platform_serial_table[] = { |
| { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, |
| { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, |
| { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, |
| { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, |
| { .type = "serial", .data = (void *)PORT_UNKNOWN, }, |
| { /* end of list */ }, |
| }; |
| |
| static struct of_platform_driver __devinitdata of_platform_serial_driver = { |
| .owner = THIS_MODULE, |
| .name = "of_serial", |
| .probe = of_platform_serial_probe, |
| .remove = of_platform_serial_remove, |
| .match_table = of_platform_serial_table, |
| }; |
| |
| static int __init of_platform_serial_init(void) |
| { |
| return of_register_platform_driver(&of_platform_serial_driver); |
| } |
| module_init(of_platform_serial_init); |
| |
| static void __exit of_platform_serial_exit(void) |
| { |
| return of_unregister_platform_driver(&of_platform_serial_driver); |
| }; |
| module_exit(of_platform_serial_exit); |
| |
| MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); |