| /* |
| Copyright (C) 2004 - 2007 rt2x00 SourceForge Project |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the |
| Free Software Foundation, Inc., |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| Module: rt2x00usb |
| Abstract: rt2x00 generic usb device routines. |
| */ |
| |
| /* |
| * Set enviroment defines for rt2x00.h |
| */ |
| #define DRV_NAME "rt2x00usb" |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #include "rt2x00.h" |
| #include "rt2x00usb.h" |
| |
| /* |
| * Interfacing with the HW. |
| */ |
| int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, |
| const u8 request, const u8 requesttype, |
| const u16 offset, const u16 value, |
| void *buffer, const u16 buffer_length, |
| u16 timeout) |
| { |
| struct usb_device *usb_dev = |
| interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); |
| int status; |
| unsigned int i; |
| unsigned int pipe = |
| (requesttype == USB_VENDOR_REQUEST_IN) ? |
| usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); |
| |
| for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| status = usb_control_msg(usb_dev, pipe, request, requesttype, |
| value, offset, buffer, buffer_length, |
| timeout); |
| if (status >= 0) |
| return 0; |
| |
| /* |
| * Check for errors, |
| * -ETIMEDOUT: We need a bit more time to complete. |
| * -ENODEV: Device has disappeared, no point continuing. |
| */ |
| if (status == -ETIMEDOUT) |
| timeout *= 2; |
| else if (status == -ENODEV) |
| break; |
| } |
| |
| ERROR(rt2x00dev, |
| "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n", |
| request, offset, status); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); |
| |
| int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, |
| const u8 request, const u8 requesttype, |
| const u16 offset, void *buffer, |
| const u16 buffer_length, u16 timeout) |
| { |
| int status; |
| |
| /* |
| * Check for Cache availability. |
| */ |
| if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) { |
| ERROR(rt2x00dev, "CSR cache not available.\n"); |
| return -ENOMEM; |
| } |
| |
| if (requesttype == USB_VENDOR_REQUEST_OUT) |
| memcpy(rt2x00dev->csr_cache, buffer, buffer_length); |
| |
| status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, |
| offset, 0, rt2x00dev->csr_cache, |
| buffer_length, timeout); |
| |
| if (!status && requesttype == USB_VENDOR_REQUEST_IN) |
| memcpy(buffer, rt2x00dev->csr_cache, buffer_length); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); |
| |
| /* |
| * TX data handlers. |
| */ |
| static void rt2x00usb_interrupt_txdone(struct urb *urb) |
| { |
| struct data_entry *entry = (struct data_entry *)urb->context; |
| struct data_ring *ring = entry->ring; |
| struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; |
| struct data_desc *txd = (struct data_desc *)entry->skb->data; |
| u32 word; |
| int tx_status; |
| |
| if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || |
| !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) |
| return; |
| |
| rt2x00_desc_read(txd, 0, &word); |
| |
| /* |
| * Remove the descriptor data from the buffer. |
| */ |
| skb_pull(entry->skb, ring->desc_size); |
| |
| /* |
| * Obtain the status about this packet. |
| */ |
| tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; |
| |
| rt2x00lib_txdone(entry, tx_status, 0); |
| |
| /* |
| * Make this entry available for reuse. |
| */ |
| entry->flags = 0; |
| rt2x00_ring_index_done_inc(entry->ring); |
| |
| /* |
| * If the data ring was full before the txdone handler |
| * we must make sure the packet queue in the mac80211 stack |
| * is reenabled when the txdone handler has finished. |
| */ |
| if (!rt2x00_ring_full(ring)) |
| ieee80211_wake_queue(rt2x00dev->hw, |
| entry->tx_status.control.queue); |
| } |
| |
| int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, |
| struct data_ring *ring, struct sk_buff *skb, |
| struct ieee80211_tx_control *control) |
| { |
| struct usb_device *usb_dev = |
| interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); |
| struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; |
| struct data_entry *entry = rt2x00_get_data_entry(ring); |
| u32 length = skb->len; |
| |
| if (rt2x00_ring_full(ring)) { |
| ieee80211_stop_queue(rt2x00dev->hw, control->queue); |
| return -EINVAL; |
| } |
| |
| if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) { |
| ERROR(rt2x00dev, |
| "Arrived at non-free entry in the non-full queue %d.\n" |
| "Please file bug report to %s.\n", |
| control->queue, DRV_PROJECT); |
| ieee80211_stop_queue(rt2x00dev->hw, control->queue); |
| return -EINVAL; |
| } |
| |
| /* |
| * Add the descriptor in front of the skb. |
| */ |
| skb_push(skb, rt2x00dev->hw->extra_tx_headroom); |
| memset(skb->data, 0x00, rt2x00dev->hw->extra_tx_headroom); |
| |
| rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, |
| ieee80211hdr, length, control); |
| memcpy(&entry->tx_status.control, control, sizeof(*control)); |
| entry->skb = skb; |
| |
| /* |
| * Length passed to usb_fill_urb cannot be an odd number, |
| * so add 1 byte to make it even. |
| */ |
| length += rt2x00dev->hw->extra_tx_headroom; |
| if (length % 2) |
| length++; |
| |
| __set_bit(ENTRY_OWNER_NIC, &entry->flags); |
| usb_fill_bulk_urb(entry->priv, usb_dev, |
| usb_sndbulkpipe(usb_dev, 1), |
| skb->data, length, rt2x00usb_interrupt_txdone, entry); |
| usb_submit_urb(entry->priv, GFP_ATOMIC); |
| |
| rt2x00_ring_index_inc(ring); |
| |
| if (rt2x00_ring_full(ring)) |
| ieee80211_stop_queue(rt2x00dev->hw, control->queue); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); |
| |
| /* |
| * RX data handlers. |
| */ |
| static void rt2x00usb_interrupt_rxdone(struct urb *urb) |
| { |
| struct data_entry *entry = (struct data_entry *)urb->context; |
| struct data_ring *ring = entry->ring; |
| struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; |
| struct sk_buff *skb; |
| struct rxdata_entry_desc desc; |
| int frame_size; |
| |
| if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || |
| !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) |
| return; |
| |
| /* |
| * Check if the received data is simply too small |
| * to be actually valid, or if the urb is signaling |
| * a problem. |
| */ |
| if (urb->actual_length < entry->ring->desc_size || urb->status) |
| goto skip_entry; |
| |
| memset(&desc, 0x00, sizeof(desc)); |
| rt2x00dev->ops->lib->fill_rxdone(entry, &desc); |
| |
| /* |
| * Allocate a new sk buffer to replace the current one. |
| * If allocation fails, we should drop the current frame |
| * so we can recycle the existing sk buffer for the new frame. |
| */ |
| frame_size = entry->ring->data_size + entry->ring->desc_size; |
| skb = dev_alloc_skb(frame_size + NET_IP_ALIGN); |
| if (!skb) |
| goto skip_entry; |
| |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, frame_size); |
| |
| /* |
| * Trim the skb_buffer to only contain the valid |
| * frame data (so ignore the device's descriptor). |
| */ |
| skb_trim(entry->skb, desc.size); |
| |
| /* |
| * Send the frame to rt2x00lib for further processing. |
| */ |
| rt2x00lib_rxdone(entry, entry->skb, &desc); |
| |
| /* |
| * Replace current entry's skb with the newly allocated one, |
| * and reinitialize the urb. |
| */ |
| entry->skb = skb; |
| urb->transfer_buffer = entry->skb->data; |
| urb->transfer_buffer_length = entry->skb->len; |
| |
| skip_entry: |
| if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { |
| __set_bit(ENTRY_OWNER_NIC, &entry->flags); |
| usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| rt2x00_ring_index_inc(ring); |
| } |
| |
| /* |
| * Radio handlers |
| */ |
| void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev) |
| { |
| struct usb_device *usb_dev = |
| interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); |
| struct data_ring *ring; |
| struct data_entry *entry; |
| unsigned int i; |
| |
| /* |
| * Initialize the TX rings |
| */ |
| txringall_for_each(rt2x00dev, ring) { |
| for (i = 0; i < ring->stats.limit; i++) |
| ring->entry[i].flags = 0; |
| |
| rt2x00_ring_index_clear(ring); |
| } |
| |
| /* |
| * Initialize and start the RX ring. |
| */ |
| rt2x00_ring_index_clear(rt2x00dev->rx); |
| |
| for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { |
| entry = &rt2x00dev->rx->entry[i]; |
| |
| usb_fill_bulk_urb(entry->priv, usb_dev, |
| usb_rcvbulkpipe(usb_dev, 1), |
| entry->skb->data, entry->skb->len, |
| rt2x00usb_interrupt_rxdone, entry); |
| |
| __set_bit(ENTRY_OWNER_NIC, &entry->flags); |
| usb_submit_urb(entry->priv, GFP_ATOMIC); |
| } |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio); |
| |
| void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) |
| { |
| struct data_ring *ring; |
| unsigned int i; |
| |
| rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, |
| REGISTER_TIMEOUT); |
| |
| /* |
| * Cancel all rings. |
| */ |
| ring_for_each(rt2x00dev, ring) { |
| for (i = 0; i < ring->stats.limit; i++) |
| usb_kill_urb(ring->entry[i].priv); |
| } |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); |
| |
| /* |
| * Device initialization handlers. |
| */ |
| static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, |
| struct data_ring *ring) |
| { |
| unsigned int i; |
| |
| /* |
| * Allocate the URB's |
| */ |
| for (i = 0; i < ring->stats.limit; i++) { |
| ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL); |
| if (!ring->entry[i].priv) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, |
| struct data_ring *ring) |
| { |
| unsigned int i; |
| |
| if (!ring->entry) |
| return; |
| |
| for (i = 0; i < ring->stats.limit; i++) { |
| usb_kill_urb(ring->entry[i].priv); |
| usb_free_urb(ring->entry[i].priv); |
| if (ring->entry[i].skb) |
| kfree_skb(ring->entry[i].skb); |
| } |
| } |
| |
| int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) |
| { |
| struct data_ring *ring; |
| struct sk_buff *skb; |
| unsigned int entry_size; |
| unsigned int i; |
| int status; |
| |
| /* |
| * Allocate DMA |
| */ |
| ring_for_each(rt2x00dev, ring) { |
| status = rt2x00usb_alloc_urb(rt2x00dev, ring); |
| if (status) |
| goto exit; |
| } |
| |
| /* |
| * For the RX ring, skb's should be allocated. |
| */ |
| entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; |
| for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { |
| skb = dev_alloc_skb(NET_IP_ALIGN + entry_size); |
| if (!skb) |
| goto exit; |
| |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, entry_size); |
| |
| rt2x00dev->rx->entry[i].skb = skb; |
| } |
| |
| return 0; |
| |
| exit: |
| rt2x00usb_uninitialize(rt2x00dev); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_initialize); |
| |
| void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) |
| { |
| struct data_ring *ring; |
| |
| ring_for_each(rt2x00dev, ring) |
| rt2x00usb_free_urb(rt2x00dev, ring); |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); |
| |
| /* |
| * USB driver handlers. |
| */ |
| static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) |
| { |
| kfree(rt2x00dev->rf); |
| rt2x00dev->rf = NULL; |
| |
| kfree(rt2x00dev->eeprom); |
| rt2x00dev->eeprom = NULL; |
| |
| kfree(rt2x00dev->csr_cache); |
| rt2x00dev->csr_cache = NULL; |
| } |
| |
| static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) |
| { |
| rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); |
| if (!rt2x00dev->csr_cache) |
| goto exit; |
| |
| rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); |
| if (!rt2x00dev->eeprom) |
| goto exit; |
| |
| rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); |
| if (!rt2x00dev->rf) |
| goto exit; |
| |
| return 0; |
| |
| exit: |
| ERROR_PROBE("Failed to allocate registers.\n"); |
| |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| return -ENOMEM; |
| } |
| |
| int rt2x00usb_probe(struct usb_interface *usb_intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *usb_dev = interface_to_usbdev(usb_intf); |
| struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info; |
| struct ieee80211_hw *hw; |
| struct rt2x00_dev *rt2x00dev; |
| int retval; |
| |
| usb_dev = usb_get_dev(usb_dev); |
| |
| hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); |
| if (!hw) { |
| ERROR_PROBE("Failed to allocate hardware.\n"); |
| retval = -ENOMEM; |
| goto exit_put_device; |
| } |
| |
| usb_set_intfdata(usb_intf, hw); |
| |
| rt2x00dev = hw->priv; |
| rt2x00dev->dev = usb_intf; |
| rt2x00dev->ops = ops; |
| rt2x00dev->hw = hw; |
| |
| retval = rt2x00usb_alloc_reg(rt2x00dev); |
| if (retval) |
| goto exit_free_device; |
| |
| retval = rt2x00lib_probe_dev(rt2x00dev); |
| if (retval) |
| goto exit_free_reg; |
| |
| return 0; |
| |
| exit_free_reg: |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| exit_free_device: |
| ieee80211_free_hw(hw); |
| |
| exit_put_device: |
| usb_put_dev(usb_dev); |
| |
| usb_set_intfdata(usb_intf, NULL); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_probe); |
| |
| void rt2x00usb_disconnect(struct usb_interface *usb_intf) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| |
| /* |
| * Free all allocated data. |
| */ |
| rt2x00lib_remove_dev(rt2x00dev); |
| rt2x00usb_free_reg(rt2x00dev); |
| ieee80211_free_hw(hw); |
| |
| /* |
| * Free the USB device data. |
| */ |
| usb_set_intfdata(usb_intf, NULL); |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); |
| |
| #ifdef CONFIG_PM |
| int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| int retval; |
| |
| retval = rt2x00lib_suspend(rt2x00dev, state); |
| if (retval) |
| return retval; |
| |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| /* |
| * Decrease usbdev refcount. |
| */ |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_suspend); |
| |
| int rt2x00usb_resume(struct usb_interface *usb_intf) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| int retval; |
| |
| usb_get_dev(interface_to_usbdev(usb_intf)); |
| |
| retval = rt2x00usb_alloc_reg(rt2x00dev); |
| if (retval) |
| return retval; |
| |
| retval = rt2x00lib_resume(rt2x00dev); |
| if (retval) |
| goto exit_free_reg; |
| |
| return 0; |
| |
| exit_free_reg: |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_resume); |
| #endif /* CONFIG_PM */ |
| |
| /* |
| * rt2x00pci module information. |
| */ |
| MODULE_AUTHOR(DRV_PROJECT); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DESCRIPTION("rt2x00 library"); |
| MODULE_LICENSE("GPL"); |