| /* |
| * AS3711 PMIC MFC driver |
| * |
| * Copyright (C) 2012 Renesas Electronics Corporation |
| * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the version 2 of the GNU General Public License as |
| * published by the Free Software Foundation |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/as3711.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| enum { |
| AS3711_REGULATOR, |
| AS3711_BACKLIGHT, |
| }; |
| |
| /* |
| * Ok to have it static: it is only used during probing and multiple I2C devices |
| * cannot be probed simultaneously. Just make sure to avoid stale data. |
| */ |
| static struct mfd_cell as3711_subdevs[] = { |
| [AS3711_REGULATOR] = {.name = "as3711-regulator",}, |
| [AS3711_BACKLIGHT] = {.name = "as3711-backlight",}, |
| }; |
| |
| static bool as3711_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case AS3711_GPIO_SIGNAL_IN: |
| case AS3711_INTERRUPT_STATUS_1: |
| case AS3711_INTERRUPT_STATUS_2: |
| case AS3711_INTERRUPT_STATUS_3: |
| case AS3711_CHARGER_STATUS_1: |
| case AS3711_CHARGER_STATUS_2: |
| case AS3711_REG_STATUS: |
| return true; |
| } |
| return false; |
| } |
| |
| static bool as3711_precious_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case AS3711_INTERRUPT_STATUS_1: |
| case AS3711_INTERRUPT_STATUS_2: |
| case AS3711_INTERRUPT_STATUS_3: |
| return true; |
| } |
| return false; |
| } |
| |
| static bool as3711_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case AS3711_SD_1_VOLTAGE: |
| case AS3711_SD_2_VOLTAGE: |
| case AS3711_SD_3_VOLTAGE: |
| case AS3711_SD_4_VOLTAGE: |
| case AS3711_LDO_1_VOLTAGE: |
| case AS3711_LDO_2_VOLTAGE: |
| case AS3711_LDO_3_VOLTAGE: |
| case AS3711_LDO_4_VOLTAGE: |
| case AS3711_LDO_5_VOLTAGE: |
| case AS3711_LDO_6_VOLTAGE: |
| case AS3711_LDO_7_VOLTAGE: |
| case AS3711_LDO_8_VOLTAGE: |
| case AS3711_SD_CONTROL: |
| case AS3711_GPIO_SIGNAL_OUT: |
| case AS3711_GPIO_SIGNAL_IN: |
| case AS3711_SD_CONTROL_1: |
| case AS3711_SD_CONTROL_2: |
| case AS3711_CURR_CONTROL: |
| case AS3711_CURR1_VALUE: |
| case AS3711_CURR2_VALUE: |
| case AS3711_CURR3_VALUE: |
| case AS3711_STEPUP_CONTROL_1: |
| case AS3711_STEPUP_CONTROL_2: |
| case AS3711_STEPUP_CONTROL_4: |
| case AS3711_STEPUP_CONTROL_5: |
| case AS3711_REG_STATUS: |
| case AS3711_INTERRUPT_STATUS_1: |
| case AS3711_INTERRUPT_STATUS_2: |
| case AS3711_INTERRUPT_STATUS_3: |
| case AS3711_CHARGER_STATUS_1: |
| case AS3711_CHARGER_STATUS_2: |
| case AS3711_ASIC_ID_1: |
| case AS3711_ASIC_ID_2: |
| return true; |
| } |
| return false; |
| } |
| |
| static const struct regmap_config as3711_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_reg = as3711_volatile_reg, |
| .readable_reg = as3711_readable_reg, |
| .precious_reg = as3711_precious_reg, |
| .max_register = AS3711_MAX_REGS, |
| .num_reg_defaults_raw = AS3711_MAX_REGS, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int as3711_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct as3711 *as3711; |
| struct as3711_platform_data *pdata = client->dev.platform_data; |
| unsigned int id1, id2; |
| int ret; |
| |
| if (!pdata) |
| dev_dbg(&client->dev, "Platform data not found\n"); |
| |
| as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL); |
| if (!as3711) { |
| dev_err(&client->dev, "Memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| as3711->dev = &client->dev; |
| i2c_set_clientdata(client, as3711); |
| |
| if (client->irq) |
| dev_notice(&client->dev, "IRQ not supported yet\n"); |
| |
| as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config); |
| if (IS_ERR(as3711->regmap)) { |
| ret = PTR_ERR(as3711->regmap); |
| dev_err(&client->dev, "regmap initialization failed: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_1, &id1); |
| if (!ret) |
| ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_2, &id2); |
| if (ret < 0) { |
| dev_err(&client->dev, "regmap_read() failed: %d\n", ret); |
| return ret; |
| } |
| if (id1 != 0x8b) |
| return -ENODEV; |
| dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2); |
| |
| /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ |
| if (pdata) { |
| as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; |
| as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); |
| as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; |
| as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); |
| } else { |
| as3711_subdevs[AS3711_REGULATOR].platform_data = NULL; |
| as3711_subdevs[AS3711_REGULATOR].pdata_size = 0; |
| as3711_subdevs[AS3711_BACKLIGHT].platform_data = NULL; |
| as3711_subdevs[AS3711_BACKLIGHT].pdata_size = 0; |
| } |
| |
| ret = mfd_add_devices(as3711->dev, -1, as3711_subdevs, |
| ARRAY_SIZE(as3711_subdevs), NULL, 0, NULL); |
| if (ret < 0) |
| dev_err(&client->dev, "add mfd devices failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int as3711_i2c_remove(struct i2c_client *client) |
| { |
| struct as3711 *as3711 = i2c_get_clientdata(client); |
| |
| mfd_remove_devices(as3711->dev); |
| return 0; |
| } |
| |
| static const struct i2c_device_id as3711_i2c_id[] = { |
| {.name = "as3711", .driver_data = 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, as3711_i2c_id); |
| |
| static struct i2c_driver as3711_i2c_driver = { |
| .driver = { |
| .name = "as3711", |
| .owner = THIS_MODULE, |
| }, |
| .probe = as3711_i2c_probe, |
| .remove = as3711_i2c_remove, |
| .id_table = as3711_i2c_id, |
| }; |
| |
| static int __init as3711_i2c_init(void) |
| { |
| return i2c_add_driver(&as3711_i2c_driver); |
| } |
| /* Initialise early */ |
| subsys_initcall(as3711_i2c_init); |
| |
| static void __exit as3711_i2c_exit(void) |
| { |
| i2c_del_driver(&as3711_i2c_driver); |
| } |
| module_exit(as3711_i2c_exit); |
| |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| MODULE_DESCRIPTION("AS3711 PMIC driver"); |
| MODULE_LICENSE("GPL v2"); |