| /* |
| * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "pmi632.dtsi" |
| |
| &spmi_bus { |
| /delete-node/ qcom,pmi8950@2; |
| /delete-node/ qcom,pmi8950@3; |
| }; |
| |
| &pm8953_typec { |
| status = "disabled"; |
| }; |
| |
| &pmi632_pon { |
| qcom,ps-hold-hard-reset-disable; |
| qcom,ps-hold-shutdown-disable; |
| }; |
| |
| &usb3 { |
| extcon = <&pmi632_charger>, <&pmi632_charger>, <0>, |
| <&pmi632_charger>, <&pmi632_charger>; |
| vbus_dwc3-supply = <&smb5_vbus>; |
| }; |
| |
| /{ |
| mtp_batterydata: qcom,battery-data { |
| qcom,batt-id-range-pct = <15>; |
| //<20202/04/22-JessicaTseng, Add Fuji & Kayo battery profiles |
| #if 1 |
| #include "qg-batterydata-Fuji-3000mah-Jan22th2019-pmi632.dtsi" |
| #include "qg-batterydata-Kayo-3000mah-Nov4th2019-pmi632.dtsi" |
| #else |
| #include "qg-batterydata-ascent-3450mah.dtsi" |
| #include "qg-batterydata-mlp356477-2800mah.dtsi" |
| #endif |
| //>2020/04/22-JessicaTseng |
| }; |
| }; |
| |
| &pmi632_vadc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&quiet_therm_default &smb_therm_default>; |
| }; |
| |
| &pmi632_gpios { |
| quiet_therm { |
| quiet_therm_default: quiet_therm_default { |
| pins = "gpio3"; |
| bias-high-impedance; |
| }; |
| }; |
| |
| smb_therm { |
| smb_therm_default: smb_therm_default { |
| pins = "gpio4"; |
| bias-high-impedance; |
| }; |
| }; |
| }; |
| |
| &pmi632_qg { |
| qcom,battery-data = <&mtp_batterydata>; |
| }; |
| |
| &pmi632_charger { |
| qcom,battery-data = <&mtp_batterydata>; |
| }; |
| |
| &pm8953_gpios { |
| bklt_en { |
| bklt_en_default: bklt_en_default { |
| pins = "gpio4"; |
| function = "normal"; |
| power-source = <0>; |
| output-high; |
| }; |
| }; |
| }; |
| |
| &pm8953_pwm { |
| status = "ok"; |
| }; |
| |
| &thermal_zones { |
| pmi-vbat-lvl0 { |
| cooling-maps { |
| vbat_map0 { |
| trip = <&pmi632_vbat_lvl0>; |
| /* throttle from fmax to 1689600KHz */ |
| cooling-device = <&CPU0 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| vbat_map1 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = <&CPU1 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| vbat_map2 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = <&CPU2 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| vbat_map3 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = <&CPU3 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| vbat_map4 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = |
| <&CPU4 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_map5 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = |
| <&CPU5 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_map6 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_map7 { |
| trip = <&pmi632_vbat_lvl0>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| |
| pmi-ibat-lvl0 { |
| cooling-maps { |
| ibat_map0 { |
| trip = <&pmi632_ibat_lvl0>; |
| /* throttle from fmax to 1689600KHz */ |
| cooling-device = <&CPU0 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| ibat_map1 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = <&CPU1 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| ibat_map2 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = <&CPU2 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| ibat_map3 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = <&CPU3 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| ibat_map4 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = |
| <&CPU4 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| ibat_map5 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = |
| <&CPU5 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| ibat_map6 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| ibat_map7 { |
| trip = <&pmi632_ibat_lvl0>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| |
| soc { |
| cooling-maps { |
| soc_map0 { |
| trip = <&pmi632_low_soc>; |
| /* throttle from fmax to 1689600KHz */ |
| cooling-device = <&CPU0 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| soc_map1 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = <&CPU1 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| soc_map2 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = <&CPU2 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| soc_map3 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = <&CPU3 (THERMAL_MAX_LIMIT - 4) |
| (THERMAL_MAX_LIMIT - 4)>; |
| }; |
| soc_map4 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = |
| <&CPU4 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_map5 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = |
| <&CPU5 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_map6 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_map7 { |
| trip = <&pmi632_low_soc>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| |
| quiet-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pmi632_adc_tm 0x53>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| case-therm-step { |
| status = "disabled"; |
| }; |
| |
| quiet-therm-step { |
| polling-delay-passive = <2000>; |
| polling-delay = <0>; |
| thermal-sensors = <&pmi632_adc_tm 0x53>; |
| thermal-governor = "step_wise"; |
| |
| trips { |
| quiet_batt_trip1: quiet_batt-trip1 { |
| temperature = <38000>; |
| hysteresis = <3000>; |
| type = "passive"; |
| }; |
| quiet_batt_trip2: quiet_batt-trip2 { |
| temperature = <40000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| quiet_batt_trip3: quiet_batt-trip3 { |
| temperature = <43000>; |
| hysteresis = <3000>; |
| type = "passive"; |
| }; |
| quiet_cpus_trip: quiet_cpus-trip { |
| temperature = <43000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| quiet_modem_trip0: quiet_modem-trip0 { |
| temperature = <45000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| quiet_batt_trip4: quiet_batt-trip4 { |
| temperature = <48000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| quiet_modem_trip1: quiet_modem-trip1 { |
| temperature = <48000>; |
| hysteresis = <3000>; |
| type = "passive"; |
| }; |
| quiet_modem_trip2: quiet_modem-trip2 { |
| temperature = <54000>; |
| hysteresis = <4000>; |
| type = "passive"; |
| }; |
| }; |
| cooling-maps { |
| skin_cpu0 { |
| trip = <&quiet_cpus_trip>; |
| /* throttle from fmax to 1689600KHz */ |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu1 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU1 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu2 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU2 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu3 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU3 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu4 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu5 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU5 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu6 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU6 THERMAL_NO_LIMIT 3>; |
| }; |
| skin_cpu7 { |
| trip = <&quiet_cpus_trip>; |
| cooling-device = <&CPU7 THERMAL_NO_LIMIT 3>; |
| }; |
| modem_lvl1 { |
| trip = <&quiet_modem_trip1>; |
| cooling-device = <&modem_pa 2 2>; |
| }; |
| modem_lvl2 { |
| trip = <&quiet_modem_trip2>; |
| cooling-device = <&modem_pa 3 3>; |
| }; |
| modem_proc_lvl1 { |
| trip = <&quiet_modem_trip0>; |
| cooling-device = <&modem_proc 1 1>; |
| }; |
| modem_proc_lvl2 { |
| trip = <&quiet_modem_trip2>; |
| cooling-device = <&modem_proc 3 3>; |
| }; |
| battery_lvl1 { |
| trip = <&quiet_batt_trip1>; |
| cooling-device = <&pmi632_charger 2 2>; |
| }; |
| battery_lvl2 { |
| trip = <&quiet_batt_trip2>; |
| cooling-device = <&pmi632_charger 3 3>; |
| }; |
| battery_lvl3 { |
| trip = <&quiet_batt_trip3>; |
| cooling-device = <&pmi632_charger 4 4>; |
| }; |
| battery_lvl4 { |
| trip = <&quiet_batt_trip4>; |
| cooling-device = <&pmi632_charger 5 5>; |
| }; |
| }; |
| }; |
| }; |
| |
| /* |
| &tlmm { |
| pmx_mdss { |
| mdss_dsi_active: mdss_dsi_active { |
| mux { |
| pins = "gpio61"; |
| }; |
| config { |
| pins = "gpio61"; |
| }; |
| }; |
| mdss_dsi_suspend: mdss_dsi_suspend { |
| mux { |
| pins = "gpio61"; |
| }; |
| config { |
| pins = "gpio61"; |
| }; |
| }; |
| }; |
| }; |
| */ |