| /* |
| * acerhdf - A driver which monitors the temperature |
| * of the aspire one netbook, turns on/off the fan |
| * as soon as the upper/lower threshold is reached. |
| * |
| * (C) 2009 - Peter Feuerer peter (a) piie.net |
| * http://piie.net |
| * 2009 Borislav Petkov bp (a) alien8.de |
| * |
| * Inspired by and many thanks to: |
| * o acerfand - Rachel Greenham |
| * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com |
| * - Petr Tomasek tomasek (#) etf,cuni,cz |
| * - Carlos Corbacho cathectic (at) gmail.com |
| * o lkml - Matthew Garrett |
| * - Borislav Petkov |
| * - Andreas Mohr |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #define pr_fmt(fmt) "acerhdf: " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/dmi.h> |
| #include <linux/acpi.h> |
| #include <linux/thermal.h> |
| #include <linux/platform_device.h> |
| |
| /* |
| * The driver is started with "kernel mode off" by default. That means, the BIOS |
| * is still in control of the fan. In this mode the driver allows to read the |
| * temperature of the cpu and a userspace tool may take over control of the fan. |
| * If the driver is switched to "kernel mode" (e.g. via module parameter) the |
| * driver is in full control of the fan. If you want the module to be started in |
| * kernel mode by default, define the following: |
| */ |
| #undef START_IN_KERNEL_MODE |
| |
| #define DRV_VER "0.5.30" |
| |
| /* |
| * According to the Atom N270 datasheet, |
| * (http://download.intel.com/design/processor/datashts/320032.pdf) the |
| * CPU's optimal operating limits denoted in junction temperature as |
| * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, |
| * assume 89°C is critical temperature. |
| */ |
| #define ACERHDF_TEMP_CRIT 89000 |
| #define ACERHDF_FAN_OFF 0 |
| #define ACERHDF_FAN_AUTO 1 |
| |
| /* |
| * No matter what value the user puts into the fanon variable, turn on the fan |
| * at 80 degree Celsius to prevent hardware damage |
| */ |
| #define ACERHDF_MAX_FANON 80000 |
| |
| /* |
| * Maximum interval between two temperature checks is 15 seconds, as the die |
| * can get hot really fast under heavy load (plus we shouldn't forget about |
| * possible impact of _external_ aggressive sources such as heaters, sun etc.) |
| */ |
| #define ACERHDF_MAX_INTERVAL 15 |
| |
| #ifdef START_IN_KERNEL_MODE |
| static int kernelmode = 1; |
| #else |
| static int kernelmode; |
| #endif |
| |
| static unsigned int interval = 10; |
| static unsigned int fanon = 60000; |
| static unsigned int fanoff = 53000; |
| static unsigned int verbose; |
| static unsigned int fanstate = ACERHDF_FAN_AUTO; |
| static char force_bios[16]; |
| static char force_product[16]; |
| static unsigned int prev_interval; |
| static struct thermal_zone_device *thz_dev; |
| static struct thermal_cooling_device *cl_dev; |
| static struct platform_device *acerhdf_dev; |
| |
| module_param(kernelmode, uint, 0); |
| MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off"); |
| module_param(interval, uint, 0600); |
| MODULE_PARM_DESC(interval, "Polling interval of temperature check"); |
| module_param(fanon, uint, 0600); |
| MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature"); |
| module_param(fanoff, uint, 0600); |
| MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature"); |
| module_param(verbose, uint, 0600); |
| MODULE_PARM_DESC(verbose, "Enable verbose dmesg output"); |
| module_param_string(force_bios, force_bios, 16, 0); |
| MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check"); |
| module_param_string(force_product, force_product, 16, 0); |
| MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check"); |
| |
| /* |
| * cmd_off: to switch the fan completely off and check if the fan is off |
| * cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then |
| * the fan speed depending on the temperature |
| */ |
| struct fancmd { |
| u8 cmd_off; |
| u8 cmd_auto; |
| }; |
| |
| struct manualcmd { |
| u8 mreg; |
| u8 moff; |
| }; |
| |
| /* default register and command to disable fan in manual mode */ |
| static const struct manualcmd mcmd = { |
| .mreg = 0x94, |
| .moff = 0xff, |
| }; |
| |
| /* BIOS settings */ |
| struct bios_settings_t { |
| const char *vendor; |
| const char *product; |
| const char *version; |
| unsigned char fanreg; |
| unsigned char tempreg; |
| struct fancmd cmd; |
| int mcmd_enable; |
| }; |
| |
| /* Register addresses and values for different BIOS versions */ |
| static const struct bios_settings_t bios_tbl[] = { |
| /* AOA110 */ |
| {"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00}, 0}, |
| {"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00}, 0}, |
| /* AOA150 */ |
| {"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0}, |
| /* LT1005u */ |
| {"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0}, |
| /* Acer 1410 */ |
| {"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| /* Acer 1810xx */ |
| {"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1810T", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| /* Acer 5755G */ |
| {"Acer", "Aspire 5755G", "V1.20", 0xab, 0xb4, {0x00, 0x08}, 0}, |
| {"Acer", "Aspire 5755G", "V1.21", 0xab, 0xb3, {0x00, 0x08}, 0}, |
| /* Acer 521 */ |
| {"Acer", "AO521", "V1.11", 0x55, 0x58, {0x1f, 0x00}, 0}, |
| /* Acer 531 */ |
| {"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0}, |
| /* Acer 751 */ |
| {"Acer", "AO751h", "V0.3206", 0x55, 0x58, {0x21, 0x00}, 0}, |
| {"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00}, 0}, |
| /* Acer 753 */ |
| {"Acer", "Aspire One 753", "V1.24", 0x93, 0xac, {0x14, 0x04}, 1}, |
| /* Acer 1825 */ |
| {"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| /* Acer Extensa 5420 */ |
| {"Acer", "Extensa 5420", "V1.17", 0x93, 0xac, {0x14, 0x04}, 1}, |
| /* Acer Aspire 5315 */ |
| {"Acer", "Aspire 5315", "V1.19", 0x93, 0xac, {0x14, 0x04}, 1}, |
| /* Acer Aspire 5739 */ |
| {"Acer", "Aspire 5739G", "V1.3311", 0x55, 0x58, {0x20, 0x00}, 0}, |
| /* Acer TravelMate 7730 */ |
| {"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00}, 0}, |
| /* Acer TravelMate TM8573T */ |
| {"Acer", "TM8573T", "V1.13", 0x93, 0xa8, {0x14, 0x04}, 1}, |
| /* Gateway */ |
| {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00}, 0}, |
| {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Gateway", "LT31", "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| /* Packard Bell */ |
| {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00}, 0}, |
| {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00}, 0}, |
| {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00}, 0}, |
| {"Packard Bell", "ENBFT", "V1.3118", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "ENBFT", "V1.3127", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTMA", "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| {"Packard Bell", "DOTVR46", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0}, |
| /* pewpew-terminator */ |
| {"", "", "", 0, 0, {0, 0}, 0} |
| }; |
| |
| static const struct bios_settings_t *bios_cfg __read_mostly; |
| |
| static int acerhdf_get_temp(int *temp) |
| { |
| u8 read_temp; |
| |
| if (ec_read(bios_cfg->tempreg, &read_temp)) |
| return -EINVAL; |
| |
| *temp = read_temp * 1000; |
| |
| return 0; |
| } |
| |
| static int acerhdf_get_fanstate(int *state) |
| { |
| u8 fan; |
| |
| if (ec_read(bios_cfg->fanreg, &fan)) |
| return -EINVAL; |
| |
| if (fan != bios_cfg->cmd.cmd_off) |
| *state = ACERHDF_FAN_AUTO; |
| else |
| *state = ACERHDF_FAN_OFF; |
| |
| return 0; |
| } |
| |
| static void acerhdf_change_fanstate(int state) |
| { |
| unsigned char cmd; |
| |
| if (verbose) |
| pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON"); |
| |
| if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) { |
| pr_err("invalid fan state %d requested, setting to auto!\n", |
| state); |
| state = ACERHDF_FAN_AUTO; |
| } |
| |
| cmd = (state == ACERHDF_FAN_OFF) ? bios_cfg->cmd.cmd_off |
| : bios_cfg->cmd.cmd_auto; |
| fanstate = state; |
| |
| ec_write(bios_cfg->fanreg, cmd); |
| |
| if (bios_cfg->mcmd_enable && state == ACERHDF_FAN_OFF) { |
| if (verbose) |
| pr_notice("turning off fan manually\n"); |
| ec_write(mcmd.mreg, mcmd.moff); |
| } |
| } |
| |
| static void acerhdf_check_param(struct thermal_zone_device *thermal) |
| { |
| if (fanon > ACERHDF_MAX_FANON) { |
| pr_err("fanon temperature too high, set to %d\n", |
| ACERHDF_MAX_FANON); |
| fanon = ACERHDF_MAX_FANON; |
| } |
| |
| if (kernelmode && prev_interval != interval) { |
| if (interval > ACERHDF_MAX_INTERVAL) { |
| pr_err("interval too high, set to %d\n", |
| ACERHDF_MAX_INTERVAL); |
| interval = ACERHDF_MAX_INTERVAL; |
| } |
| if (verbose) |
| pr_notice("interval changed to: %d\n", interval); |
| thermal->polling_delay = interval*1000; |
| prev_interval = interval; |
| } |
| } |
| |
| /* |
| * This is the thermal zone callback which does the delayed polling of the fan |
| * state. We do check /sysfs-originating settings here in acerhdf_check_param() |
| * as late as the polling interval is since we can't do that in the respective |
| * accessors of the module parameters. |
| */ |
| static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, |
| unsigned long *t) |
| { |
| int temp, err = 0; |
| |
| acerhdf_check_param(thermal); |
| |
| err = acerhdf_get_temp(&temp); |
| if (err) |
| return err; |
| |
| if (verbose) |
| pr_notice("temp %d\n", temp); |
| |
| *t = temp; |
| return 0; |
| } |
| |
| static int acerhdf_bind(struct thermal_zone_device *thermal, |
| struct thermal_cooling_device *cdev) |
| { |
| /* if the cooling device is the one from acerhdf bind it */ |
| if (cdev != cl_dev) |
| return 0; |
| |
| if (thermal_zone_bind_cooling_device(thermal, 0, cdev, |
| THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) { |
| pr_err("error binding cooling dev\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int acerhdf_unbind(struct thermal_zone_device *thermal, |
| struct thermal_cooling_device *cdev) |
| { |
| if (cdev != cl_dev) |
| return 0; |
| |
| if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) { |
| pr_err("error unbinding cooling dev\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static inline void acerhdf_revert_to_bios_mode(void) |
| { |
| acerhdf_change_fanstate(ACERHDF_FAN_AUTO); |
| kernelmode = 0; |
| if (thz_dev) |
| thz_dev->polling_delay = 0; |
| pr_notice("kernel mode fan control OFF\n"); |
| } |
| static inline void acerhdf_enable_kernelmode(void) |
| { |
| kernelmode = 1; |
| |
| thz_dev->polling_delay = interval*1000; |
| thermal_zone_device_update(thz_dev); |
| pr_notice("kernel mode fan control ON\n"); |
| } |
| |
| static int acerhdf_get_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode *mode) |
| { |
| if (verbose) |
| pr_notice("kernel mode fan control %d\n", kernelmode); |
| |
| *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED |
| : THERMAL_DEVICE_DISABLED; |
| |
| return 0; |
| } |
| |
| /* |
| * set operation mode; |
| * enabled: the thermal layer of the kernel takes care about |
| * the temperature and the fan. |
| * disabled: the BIOS takes control of the fan. |
| */ |
| static int acerhdf_set_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode mode) |
| { |
| if (mode == THERMAL_DEVICE_DISABLED && kernelmode) |
| acerhdf_revert_to_bios_mode(); |
| else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode) |
| acerhdf_enable_kernelmode(); |
| |
| return 0; |
| } |
| |
| static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip, |
| enum thermal_trip_type *type) |
| { |
| if (trip == 0) |
| *type = THERMAL_TRIP_ACTIVE; |
| |
| return 0; |
| } |
| |
| static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip, |
| unsigned long *temp) |
| { |
| if (trip == 0) |
| *temp = fanon; |
| |
| return 0; |
| } |
| |
| static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal, |
| unsigned long *temperature) |
| { |
| *temperature = ACERHDF_TEMP_CRIT; |
| return 0; |
| } |
| |
| /* bind callback functions to thermalzone */ |
| static struct thermal_zone_device_ops acerhdf_dev_ops = { |
| .bind = acerhdf_bind, |
| .unbind = acerhdf_unbind, |
| .get_temp = acerhdf_get_ec_temp, |
| .get_mode = acerhdf_get_mode, |
| .set_mode = acerhdf_set_mode, |
| .get_trip_type = acerhdf_get_trip_type, |
| .get_trip_temp = acerhdf_get_trip_temp, |
| .get_crit_temp = acerhdf_get_crit_temp, |
| }; |
| |
| |
| /* |
| * cooling device callback functions |
| * get maximal fan cooling state |
| */ |
| static int acerhdf_get_max_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| *state = 1; |
| |
| return 0; |
| } |
| |
| static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| int err = 0, tmp; |
| |
| err = acerhdf_get_fanstate(&tmp); |
| if (err) |
| return err; |
| |
| *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0; |
| return 0; |
| } |
| |
| /* change current fan state - is overwritten when running in kernel mode */ |
| static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long state) |
| { |
| int cur_temp, cur_state, err = 0; |
| |
| if (!kernelmode) |
| return 0; |
| |
| err = acerhdf_get_temp(&cur_temp); |
| if (err) { |
| pr_err("error reading temperature, hand off control to BIOS\n"); |
| goto err_out; |
| } |
| |
| err = acerhdf_get_fanstate(&cur_state); |
| if (err) { |
| pr_err("error reading fan state, hand off control to BIOS\n"); |
| goto err_out; |
| } |
| |
| if (state == 0) { |
| /* turn fan off only if below fanoff temperature */ |
| if ((cur_state == ACERHDF_FAN_AUTO) && |
| (cur_temp < fanoff)) |
| acerhdf_change_fanstate(ACERHDF_FAN_OFF); |
| } else { |
| if (cur_state == ACERHDF_FAN_OFF) |
| acerhdf_change_fanstate(ACERHDF_FAN_AUTO); |
| } |
| return 0; |
| |
| err_out: |
| acerhdf_revert_to_bios_mode(); |
| return -EINVAL; |
| } |
| |
| /* bind fan callbacks to fan device */ |
| static struct thermal_cooling_device_ops acerhdf_cooling_ops = { |
| .get_max_state = acerhdf_get_max_state, |
| .get_cur_state = acerhdf_get_cur_state, |
| .set_cur_state = acerhdf_set_cur_state, |
| }; |
| |
| /* suspend / resume functionality */ |
| static int acerhdf_suspend(struct device *dev) |
| { |
| if (kernelmode) |
| acerhdf_change_fanstate(ACERHDF_FAN_AUTO); |
| |
| if (verbose) |
| pr_notice("going suspend\n"); |
| |
| return 0; |
| } |
| |
| static int acerhdf_probe(struct platform_device *device) |
| { |
| return 0; |
| } |
| |
| static int acerhdf_remove(struct platform_device *device) |
| { |
| return 0; |
| } |
| |
| static const struct dev_pm_ops acerhdf_pm_ops = { |
| .suspend = acerhdf_suspend, |
| .freeze = acerhdf_suspend, |
| }; |
| |
| static struct platform_driver acerhdf_driver = { |
| .driver = { |
| .name = "acerhdf", |
| .owner = THIS_MODULE, |
| .pm = &acerhdf_pm_ops, |
| }, |
| .probe = acerhdf_probe, |
| .remove = acerhdf_remove, |
| }; |
| |
| /* checks if str begins with start */ |
| static int str_starts_with(const char *str, const char *start) |
| { |
| unsigned long str_len = 0, start_len = 0; |
| |
| str_len = strlen(str); |
| start_len = strlen(start); |
| |
| if (str_len >= start_len && |
| !strncmp(str, start, start_len)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* check hardware */ |
| static int acerhdf_check_hardware(void) |
| { |
| char const *vendor, *version, *product; |
| const struct bios_settings_t *bt = NULL; |
| |
| /* get BIOS data */ |
| vendor = dmi_get_system_info(DMI_SYS_VENDOR); |
| version = dmi_get_system_info(DMI_BIOS_VERSION); |
| product = dmi_get_system_info(DMI_PRODUCT_NAME); |
| |
| if (!vendor || !version || !product) { |
| pr_err("error getting hardware information\n"); |
| return -EINVAL; |
| } |
| |
| pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER); |
| |
| if (force_bios[0]) { |
| version = force_bios; |
| pr_info("forcing BIOS version: %s\n", version); |
| kernelmode = 0; |
| } |
| |
| if (force_product[0]) { |
| product = force_product; |
| pr_info("forcing BIOS product: %s\n", product); |
| kernelmode = 0; |
| } |
| |
| if (verbose) |
| pr_info("BIOS info: %s %s, product: %s\n", |
| vendor, version, product); |
| |
| /* search BIOS version and vendor in BIOS settings table */ |
| for (bt = bios_tbl; bt->vendor[0]; bt++) { |
| /* |
| * check if actual hardware BIOS vendor, product and version |
| * IDs start with the strings of BIOS table entry |
| */ |
| if (str_starts_with(vendor, bt->vendor) && |
| str_starts_with(product, bt->product) && |
| str_starts_with(version, bt->version)) { |
| bios_cfg = bt; |
| break; |
| } |
| } |
| |
| if (!bios_cfg) { |
| pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n", |
| vendor, product, version); |
| return -EINVAL; |
| } |
| |
| /* |
| * if started with kernel mode off, prevent the kernel from switching |
| * off the fan |
| */ |
| if (!kernelmode) { |
| pr_notice("Fan control off, to enable do:\n"); |
| pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zone0/mode\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int acerhdf_register_platform(void) |
| { |
| int err = 0; |
| |
| err = platform_driver_register(&acerhdf_driver); |
| if (err) |
| return err; |
| |
| acerhdf_dev = platform_device_alloc("acerhdf", -1); |
| if (!acerhdf_dev) { |
| err = -ENOMEM; |
| goto err_device_alloc; |
| } |
| err = platform_device_add(acerhdf_dev); |
| if (err) |
| goto err_device_add; |
| |
| return 0; |
| |
| err_device_add: |
| platform_device_put(acerhdf_dev); |
| err_device_alloc: |
| platform_driver_unregister(&acerhdf_driver); |
| return err; |
| } |
| |
| static void acerhdf_unregister_platform(void) |
| { |
| platform_device_unregister(acerhdf_dev); |
| platform_driver_unregister(&acerhdf_driver); |
| } |
| |
| static int acerhdf_register_thermal(void) |
| { |
| cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL, |
| &acerhdf_cooling_ops); |
| |
| if (IS_ERR(cl_dev)) |
| return -EINVAL; |
| |
| thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL, |
| &acerhdf_dev_ops, NULL, 0, |
| (kernelmode) ? interval*1000 : 0); |
| if (IS_ERR(thz_dev)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void acerhdf_unregister_thermal(void) |
| { |
| if (cl_dev) { |
| thermal_cooling_device_unregister(cl_dev); |
| cl_dev = NULL; |
| } |
| |
| if (thz_dev) { |
| thermal_zone_device_unregister(thz_dev); |
| thz_dev = NULL; |
| } |
| } |
| |
| static int __init acerhdf_init(void) |
| { |
| int err = 0; |
| |
| err = acerhdf_check_hardware(); |
| if (err) |
| goto out_err; |
| |
| err = acerhdf_register_platform(); |
| if (err) |
| goto out_err; |
| |
| err = acerhdf_register_thermal(); |
| if (err) |
| goto err_unreg; |
| |
| return 0; |
| |
| err_unreg: |
| acerhdf_unregister_thermal(); |
| acerhdf_unregister_platform(); |
| |
| out_err: |
| return err; |
| } |
| |
| static void __exit acerhdf_exit(void) |
| { |
| acerhdf_change_fanstate(ACERHDF_FAN_AUTO); |
| acerhdf_unregister_thermal(); |
| acerhdf_unregister_platform(); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Peter Feuerer"); |
| MODULE_DESCRIPTION("Aspire One temperature and fan driver"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5755G:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAO521*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5739G:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*One*753:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5315:"); |
| MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:"); |
| MODULE_ALIAS("dmi:*:*Acer*:TM8573T:"); |
| MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); |
| MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:"); |
| MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:"); |
| MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:"); |
| MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:"); |
| MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:"); |
| MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:"); |
| MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:"); |
| MODULE_ALIAS("dmi:*:*Acer*:pnExtensa 5420*:"); |
| |
| module_init(acerhdf_init); |
| module_exit(acerhdf_exit); |