arch/mips/sibyte/cfe/setup.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */

 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
 #include <linux/mm.h>
 #include <linux/blkdev.h>
 #include <linux/bootmem.h>
 #include <linux/pm.h>
 #include <linux/smp.h>

 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/sibyte/board.h>

 #include "cfe_api.h"
 #include "cfe_error.h"

 /* Max ram addressable in 32-bit segments */
 #ifdef CONFIG_64BIT
 #define MAX_RAM_SIZE (~0ULL)
 #else
 #ifdef CONFIG_HIGHMEM
 #ifdef CONFIG_64BIT_PHYS_ADDR
 #define MAX_RAM_SIZE (~0ULL)
 #else
 #define MAX_RAM_SIZE (0xffffffffULL)
 #endif
 #else
 #define MAX_RAM_SIZE (0x1fffffffULL)
 #endif
 #endif

 #define SIBYTE_MAX_MEM_REGIONS 8
 phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
 phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
 unsigned int board_mem_region_count;

 int cfe_cons_handle;

 #ifdef CONFIG_BLK_DEV_INITRD
 extern unsigned long initrd_start, initrd_end;
 #endif

 #ifdef CONFIG_KGDB
 extern int kgdb_port;
 #endif

 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;

 	if (smp_processor_id()) {
 		static int reboot_smp;

 		/* Don't repeat the process from another CPU */
 		if (!reboot_smp) {
 			/* Get CPU 0 to do the cfe_exit */
 			reboot_smp = 1;
 			smp_call_function(cfe_linux_exit, arg, 1, 0);
 		}
 	} else {
 		printk("Passing control back to CFE...\n");
 		cfe_exit(warm, 0);
 		printk("cfe_exit returned??\n");
 	}
 	while (1);
 }

 static void __noreturn cfe_linux_restart(char *command)
 {
 	static const int zero;

 	cfe_linux_exit((void *)&zero);
 }

 static void __noreturn cfe_linux_halt(void)
 {
 	static const int one = 1;

 	cfe_linux_exit((void *)&one);
 }

 static __init void prom_meminit(void)
 {
 	u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */
 	int mem_flags = 0;
 	unsigned int idx;
 	int rd_flag;
 #ifdef CONFIG_BLK_DEV_INITRD
 	unsigned long initrd_pstart;
 	unsigned long initrd_pend;

 	initrd_pstart = CPHYSADDR(initrd_start);
 	initrd_pend = CPHYSADDR(initrd_end);
 	if (initrd_start &&
 	    ((initrd_pstart > MAX_RAM_SIZE)
 	     || (initrd_pend > MAX_RAM_SIZE))) {
 		panic("initrd out of addressable memory");
 	}

 #endif /* INITRD */

 	for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE;
 	     idx++) {
 		rd_flag = 0;
 		if (type == CFE_MI_AVAILABLE) {
 			/*
 			 * See if this block contains (any portion of) the
 			 * ramdisk
 			 */
 #ifdef CONFIG_BLK_DEV_INITRD
 			if (initrd_start) {
 				if ((initrd_pstart > addr) &&
 				    (initrd_pstart < (addr + size))) {
 					add_memory_region(addr,
 					                  initrd_pstart - addr,
 					                  BOOT_MEM_RAM);
 					rd_flag = 1;
 				}
 				if ((initrd_pend > addr) &&
 				    (initrd_pend < (addr + size))) {
 					add_memory_region(initrd_pend,
 						(addr + size) - initrd_pend,
 						 BOOT_MEM_RAM);
 					rd_flag = 1;
 				}
 			}
 #endif
 			if (!rd_flag) {
 				if (addr > MAX_RAM_SIZE)
 					continue;
 				if (addr+size > MAX_RAM_SIZE)
 					size = MAX_RAM_SIZE - (addr+size) + 1;
 				/*
 				 * memcpy/__copy_user prefetch, which
 				 * will cause a bus error for
 				 * KSEG/KUSEG addrs not backed by RAM.
 				 * Hence, reserve some padding for the
 				 * prefetch distance.
 				 */
 				if (size > 512)
 					size -= 512;
 				add_memory_region(addr, size, BOOT_MEM_RAM);
 			}
 			board_mem_region_addrs[board_mem_region_count] = addr;
 			board_mem_region_sizes[board_mem_region_count] = size;
 			board_mem_region_count++;
 			if (board_mem_region_count ==
 			    SIBYTE_MAX_MEM_REGIONS) {
 				/*
 				 * Too many regions.  Need to configure more
 				 */
 				while(1);
 			}
 		}
 	}
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start) {
 		add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
 				  BOOT_MEM_RESERVED);
 	}
 #endif
 }

 #ifdef CONFIG_BLK_DEV_INITRD
 static int __init initrd_setup(char *str)
 {
 	char rdarg[64];
 	int idx;
 	char *tmp, *endptr;
 	unsigned long initrd_size;

 	/* Make a copy of the initrd argument so we can smash it up here */
 	for (idx = 0; idx < sizeof(rdarg)-1; idx++) {
 		if (!str[idx] || (str[idx] == ' ')) break;
 		rdarg[idx] = str[idx];
 	}

 	rdarg[idx] = 0;
 	str = rdarg;

 	/*
 	 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
 	 *  e.g. initrd=3abfd@80010000.  This is set up by the loader.
 	 */
 	for (tmp = str; *tmp != '@'; tmp++) {
 		if (!*tmp) {
 			goto fail;
 		}
 	}
 	*tmp = 0;
 	tmp++;
 	if (!*tmp) {
 		goto fail;
 	}
 	initrd_size = simple_strtoul(str, &endptr, 16);
 	if (*endptr) {
 		*(tmp-1) = '@';
 		goto fail;
 	}
 	*(tmp-1) = '@';
 	initrd_start = simple_strtoul(tmp, &endptr, 16);
 	if (*endptr) {
 		goto fail;
 	}
 	initrd_end = initrd_start + initrd_size;
 	printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
 	return 1;
  fail:
 	printk("Bad initrd argument.  Disabling initrd\n");
 	initrd_start = 0;
 	initrd_end = 0;
 	return 1;
 }

 #endif

 /*
  * prom_init is called just after the cpu type is determined, from setup_arch()
  */
 void __init prom_init(void)
 {
 	uint64_t cfe_ept, cfe_handle;
 	unsigned int cfe_eptseal;
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
 #ifdef CONFIG_KGDB
 	char *arg;
 #endif

 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
 	pm_power_off = cfe_linux_halt;

 	/*
 	 * Check if a loader was used; if NOT, the 4 arguments are
 	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
 	 */
 	if (argc < 0) {
 		cfe_handle = (uint64_t)(long)argc;
 		cfe_ept = (long)envp;
 		cfe_eptseal = (uint32_t)(unsigned long)prom_vec;
 	} else {
 		if ((int32_t)(long)prom_vec < 0) {
 			/*
 			 * Old loader; all it gives us is the handle,
 			 * so use the "known" entrypoint and assume
 			 * the seal.
 			 */
 			cfe_handle = (uint64_t)(long)prom_vec;
 			cfe_ept = (uint64_t)((int32_t)0x9fc00500);
 			cfe_eptseal = CFE_EPTSEAL;
 		} else {
 			/*
 			 * Newer loaders bundle the handle/ept/eptseal
 			 * Note: prom_vec is in the loader's useg
 			 * which is still alive in the TLB.
 			 */
 			cfe_handle = (uint64_t)((int32_t *)prom_vec)[0];
 			cfe_ept = (uint64_t)((int32_t *)prom_vec)[2];
 			cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3];
 		}
 	}
 	if (cfe_eptseal != CFE_EPTSEAL) {
 		/* too early for panic to do any good */
 		printk("CFE's entrypoint seal doesn't match. Spinning.");
 		while (1) ;
 	}
 	cfe_init(cfe_handle, cfe_ept);
 	/*
 	 * Get the handle for (at least) prom_putchar, possibly for
 	 * boot console
 	 */
 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
 	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
 		if (argc < 0) {
 			/*
 			 * It's OK for direct boot to not provide a
 			 *  command line
 			 */
 			strcpy(arcs_cmdline, "root=/dev/ram0 ");
 #ifdef CONFIG_SIBYTE_PTSWARM
 			strcat(arcs_cmdline, "console=ttyS0,115200 ");
 #endif
 		} else {
 			/* The loader should have set the command line */
 			/* too early for panic to do any good */
 			printk("LINUX_CMDLINE not defined in cfe.");
 			while (1) ;
 		}
 	}

 #ifdef CONFIG_KGDB
 	if ((arg = strstr(arcs_cmdline,"kgdb=duart")) != NULL)
 		kgdb_port = (arg[10] == '0') ? 0 : 1;
 	else
 		kgdb_port = 1;
 #endif

 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
 		/* Need to find out early whether we've got an initrd.  So scan
 		   the list looking now */
 		for (ptr = arcs_cmdline; *ptr; ptr++) {
 			while (*ptr == ' ') {
 				ptr++;
 			}
 			if (!strncmp(ptr, "initrd=", 7)) {
 				initrd_setup(ptr+7);
 				break;
 			} else {
 				while (*ptr && (*ptr != ' ')) {
 					ptr++;
 				}
 			}
 		}
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */

 	/* Not sure this is needed, but it's the safe way. */
 	arcs_cmdline[CL_SIZE-1] = 0;

 	mips_machgroup = MACH_GROUP_SIBYTE;
 	prom_meminit();
 }

 void __init prom_free_prom_memory(void)
 {
 	/* Not sure what I'm supposed to do here.  Nothing, I think */
 }

 void prom_putchar(char c)
 {
 	int ret;

 	while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0)
 		;
 }
	/*
	* Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/linkage.h>
	#include <linux/mm.h>
	#include <linux/blkdev.h>
	#include <linux/bootmem.h>
	#include <linux/pm.h>
	#include <linux/smp.h>

	#include <asm/bootinfo.h>
	#include <asm/reboot.h>
	#include <asm/sibyte/board.h>

	#include "cfe_api.h"
	#include "cfe_error.h"

	/* Max ram addressable in 32-bit segments */
	#ifdef CONFIG_64BIT
	#define MAX_RAM_SIZE (~0ULL)
	#else
	#ifdef CONFIG_HIGHMEM
	#ifdef CONFIG_64BIT_PHYS_ADDR
	#define MAX_RAM_SIZE (~0ULL)
	#else
	#define MAX_RAM_SIZE (0xffffffffULL)
	#endif
	#else
	#define MAX_RAM_SIZE (0x1fffffffULL)
	#endif
	#endif

	#define SIBYTE_MAX_MEM_REGIONS 8
	phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
	phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
	unsigned int board_mem_region_count;

	int cfe_cons_handle;

	#ifdef CONFIG_BLK_DEV_INITRD
	extern unsigned long initrd_start, initrd_end;
	#endif

	#ifdef CONFIG_KGDB
	extern int kgdb_port;
	#endif

	static void __noreturn cfe_linux_exit(void *arg)
	{
	int warm = (int )arg;

	if (smp_processor_id()) {
	static int reboot_smp;

	/* Don't repeat the process from another CPU */
	if (!reboot_smp) {
	/* Get CPU 0 to do the cfe_exit */
	reboot_smp = 1;
	smp_call_function(cfe_linux_exit, arg, 1, 0);
	}
	} else {
	printk("Passing control back to CFE...\n");
	cfe_exit(warm, 0);
	printk("cfe_exit returned??\n");
	}
	while (1);
	}

	static void __noreturn cfe_linux_restart(char *command)
	{
	static const int zero;

	cfe_linux_exit((void *)&zero);
	}

	static void __noreturn cfe_linux_halt(void)
	{
	static const int one = 1;

	cfe_linux_exit((void *)&one);
	}

	static __init void prom_meminit(void)
	{
	u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */
	int mem_flags = 0;
	unsigned int idx;
	int rd_flag;
	#ifdef CONFIG_BLK_DEV_INITRD
	unsigned long initrd_pstart;
	unsigned long initrd_pend;

	initrd_pstart = CPHYSADDR(initrd_start);
	initrd_pend = CPHYSADDR(initrd_end);
	if (initrd_start &&
	((initrd_pstart > MAX_RAM_SIZE)
	\|\| (initrd_pend > MAX_RAM_SIZE))) {
	panic("initrd out of addressable memory");
	}

	#endif /* INITRD */

	for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE;
	idx++) {
	rd_flag = 0;
	if (type == CFE_MI_AVAILABLE) {
	/*
	* See if this block contains (any portion of) the
	* ramdisk
	*/
	#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start) {
	if ((initrd_pstart > addr) &&
	(initrd_pstart < (addr + size))) {
	add_memory_region(addr,
	initrd_pstart - addr,
	BOOT_MEM_RAM);
	rd_flag = 1;
	}
	if ((initrd_pend > addr) &&
	(initrd_pend < (addr + size))) {
	add_memory_region(initrd_pend,
	(addr + size) - initrd_pend,
	BOOT_MEM_RAM);
	rd_flag = 1;
	}
	}
	#endif
	if (!rd_flag) {
	if (addr > MAX_RAM_SIZE)
	continue;
	if (addr+size > MAX_RAM_SIZE)
	size = MAX_RAM_SIZE - (addr+size) + 1;
	/*
	* memcpy/__copy_user prefetch, which
	* will cause a bus error for
	* KSEG/KUSEG addrs not backed by RAM.
	* Hence, reserve some padding for the
	* prefetch distance.
	*/
	if (size > 512)
	size -= 512;
	add_memory_region(addr, size, BOOT_MEM_RAM);
	}
	board_mem_region_addrs[board_mem_region_count] = addr;
	board_mem_region_sizes[board_mem_region_count] = size;
	board_mem_region_count++;
	if (board_mem_region_count ==
	SIBYTE_MAX_MEM_REGIONS) {
	/*
	* Too many regions. Need to configure more
	*/
	while(1);
	}
	}
	}
	#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start) {
	add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
	BOOT_MEM_RESERVED);
	}
	#endif
	}

	#ifdef CONFIG_BLK_DEV_INITRD
	static int __init initrd_setup(char *str)
	{
	char rdarg[64];
	int idx;
	char tmp, endptr;
	unsigned long initrd_size;

	/* Make a copy of the initrd argument so we can smash it up here */
	for (idx = 0; idx < sizeof(rdarg)-1; idx++) {
	if (!str[idx] \|\| (str[idx] == ' ')) break;
	rdarg[idx] = str[idx];
	}

	rdarg[idx] = 0;
	str = rdarg;

	/*
	*Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
	* e.g. initrd=3abfd@80010000. This is set up by the loader.
	*/
	for (tmp = str; *tmp != '@'; tmp++) {
	if (!*tmp) {
	goto fail;
	}
	}
	*tmp = 0;
	tmp++;
	if (!*tmp) {
	goto fail;
	}
	initrd_size = simple_strtoul(str, &endptr, 16);
	if (*endptr) {
	*(tmp-1) = '@';
	goto fail;
	}
	*(tmp-1) = '@';
	initrd_start = simple_strtoul(tmp, &endptr, 16);
	if (*endptr) {
	goto fail;
	}
	initrd_end = initrd_start + initrd_size;
	printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
	return 1;
	fail:
	printk("Bad initrd argument. Disabling initrd\n");
	initrd_start = 0;
	initrd_end = 0;
	return 1;
	}

	#endif

	/*
	* prom_init is called just after the cpu type is determined, from setup_arch()
	*/
	void __init prom_init(void)
	{
	uint64_t cfe_ept, cfe_handle;
	unsigned int cfe_eptseal;
	int argc = fw_arg0;
	char envp = (char ) fw_arg2;
	int prom_vec = (int ) fw_arg3;
	#ifdef CONFIG_KGDB
	char *arg;
	#endif

	_machine_restart = cfe_linux_restart;
	_machine_halt = cfe_linux_halt;
	pm_power_off = cfe_linux_halt;

	/*
	* Check if a loader was used; if NOT, the 4 arguments are
	* what CFE gives us (handle, 0, EPT and EPTSEAL)
	*/
	if (argc < 0) {
	cfe_handle = (uint64_t)(long)argc;
	cfe_ept = (long)envp;
	cfe_eptseal = (uint32_t)(unsigned long)prom_vec;
	} else {
	if ((int32_t)(long)prom_vec < 0) {
	/*
	* Old loader; all it gives us is the handle,
	* so use the "known" entrypoint and assume
	* the seal.
	*/
	cfe_handle = (uint64_t)(long)prom_vec;
	cfe_ept = (uint64_t)((int32_t)0x9fc00500);
	cfe_eptseal = CFE_EPTSEAL;
	} else {
	/*
	* Newer loaders bundle the handle/ept/eptseal
	* Note: prom_vec is in the loader's useg
	* which is still alive in the TLB.
	*/
	cfe_handle = (uint64_t)((int32_t *)prom_vec)[0];
	cfe_ept = (uint64_t)((int32_t *)prom_vec)[2];
	cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3];
	}
	}
	if (cfe_eptseal != CFE_EPTSEAL) {
	/* too early for panic to do any good */
	printk("CFE's entrypoint seal doesn't match. Spinning.");
	while (1) ;
	}
	cfe_init(cfe_handle, cfe_ept);
	/*
	* Get the handle for (at least) prom_putchar, possibly for
	* boot console
	*/
	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
	if (argc < 0) {
	/*
	* It's OK for direct boot to not provide a
	* command line
	*/
	strcpy(arcs_cmdline, "root=/dev/ram0 ");
	#ifdef CONFIG_SIBYTE_PTSWARM
	strcat(arcs_cmdline, "console=ttyS0,115200 ");
	#endif
	} else {
	/* The loader should have set the command line */
	/* too early for panic to do any good */
	printk("LINUX_CMDLINE not defined in cfe.");
	while (1) ;
	}
	}

	#ifdef CONFIG_KGDB
	if ((arg = strstr(arcs_cmdline,"kgdb=duart")) != NULL)
	kgdb_port = (arg[10] == '0') ? 0 : 1;
	else
	kgdb_port = 1;
	#endif

	#ifdef CONFIG_BLK_DEV_INITRD
	{
	char *ptr;
	/* Need to find out early whether we've got an initrd. So scan
	the list looking now */
	for (ptr = arcs_cmdline; *ptr; ptr++) {
	while (*ptr == ' ') {
	ptr++;
	}
	if (!strncmp(ptr, "initrd=", 7)) {
	initrd_setup(ptr+7);
	break;
	} else {
	while (ptr && (ptr != ' ')) {
	ptr++;
	}
	}
	}
	}
	#endif /* CONFIG_BLK_DEV_INITRD */

	/* Not sure this is needed, but it's the safe way. */
	arcs_cmdline[CL_SIZE-1] = 0;

	mips_machgroup = MACH_GROUP_SIBYTE;
	prom_meminit();
	}

	void __init prom_free_prom_memory(void)
	{
	/* Not sure what I'm supposed to do here. Nothing, I think */
	}

	void prom_putchar(char c)
	{
	int ret;

	while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0)
	;
	}