blob: 2097a7d3c5b82dabb482d9b670feef0ec1733d19 [file] [log] [blame]
/*
* Copyright (c) 2007 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/device.h>
#include <linux/mlx4/cmd.h>
#include "mlx4_en.h"
MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")");
static const char mlx4_en_version[] =
DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
DRV_VERSION " (" DRV_RELDATE ")\n";
#define MLX4_EN_PARM_INT(X, def_val, desc) \
static unsigned int X = def_val;\
module_param(X , uint, 0444); \
MODULE_PARM_DESC(X, desc);
/*
* Device scope module parameters
*/
/* Enable RSS UDP traffic */
MLX4_EN_PARM_INT(udp_rss, 1,
"Enable RSS for incomming UDP traffic or disabled (0)");
/* Priority pausing */
MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
" Per priority bit mask");
MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
" Per priority bit mask");
int en_print(const char *level, const struct mlx4_en_priv *priv,
const char *format, ...)
{
va_list args;
struct va_format vaf;
int i;
va_start(args, format);
vaf.fmt = format;
vaf.va = &args;
if (priv->registered)
i = printk("%s%s: %s: %pV",
level, DRV_NAME, priv->dev->name, &vaf);
else
i = printk("%s%s: %s: Port %d: %pV",
level, DRV_NAME, dev_name(&priv->mdev->pdev->dev),
priv->port, &vaf);
va_end(args);
return i;
}
static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
{
struct mlx4_en_profile *params = &mdev->profile;
int i;
params->udp_rss = udp_rss;
if (params->udp_rss && !(mdev->dev->caps.flags
& MLX4_DEV_CAP_FLAG_UDP_RSS)) {
mlx4_warn(mdev, "UDP RSS is not supported on this device.\n");
params->udp_rss = 0;
}
for (i = 1; i <= MLX4_MAX_PORTS; i++) {
params->prof[i].rx_pause = 1;
params->prof[i].rx_ppp = pfcrx;
params->prof[i].tx_pause = 1;
params->prof[i].tx_ppp = pfctx;
params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
params->prof[i].tx_ring_num = MLX4_EN_NUM_TX_RINGS +
(!!pfcrx) * MLX4_EN_NUM_PPP_RINGS;
params->prof[i].rss_rings = 0;
}
return 0;
}
static void *mlx4_en_get_netdev(struct mlx4_dev *dev, void *ctx, u8 port)
{
struct mlx4_en_dev *endev = ctx;
return endev->pndev[port];
}
static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
enum mlx4_dev_event event, int port)
{
struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr;
struct mlx4_en_priv *priv;
if (!mdev->pndev[port])
return;
priv = netdev_priv(mdev->pndev[port]);
switch (event) {
case MLX4_DEV_EVENT_PORT_UP:
case MLX4_DEV_EVENT_PORT_DOWN:
/* To prevent races, we poll the link state in a separate
task rather than changing it here */
priv->link_state = event;
queue_work(mdev->workqueue, &priv->linkstate_task);
break;
case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
mlx4_err(mdev, "Internal error detected, restarting device\n");
break;
default:
mlx4_warn(mdev, "Unhandled event: %d\n", event);
}
}
static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr)
{
struct mlx4_en_dev *mdev = endev_ptr;
int i;
mutex_lock(&mdev->state_lock);
mdev->device_up = false;
mutex_unlock(&mdev->state_lock);
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
if (mdev->pndev[i])
mlx4_en_destroy_netdev(mdev->pndev[i]);
flush_workqueue(mdev->workqueue);
destroy_workqueue(mdev->workqueue);
mlx4_mr_free(dev, &mdev->mr);
iounmap(mdev->uar_map);
mlx4_uar_free(dev, &mdev->priv_uar);
mlx4_pd_free(dev, mdev->priv_pdn);
kfree(mdev);
}
static void *mlx4_en_add(struct mlx4_dev *dev)
{
struct mlx4_en_dev *mdev;
int i;
int err;
printk_once(KERN_INFO "%s", mlx4_en_version);
mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
if (!mdev) {
dev_err(&dev->pdev->dev, "Device struct alloc failed, "
"aborting.\n");
err = -ENOMEM;
goto err_free_res;
}
if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
goto err_free_dev;
if (mlx4_uar_alloc(dev, &mdev->priv_uar))
goto err_pd;
mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT,
PAGE_SIZE);
if (!mdev->uar_map)
goto err_uar;
spin_lock_init(&mdev->uar_lock);
mdev->dev = dev;
mdev->dma_device = &(dev->pdev->dev);
mdev->pdev = dev->pdev;
mdev->device_up = false;
mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
if (!mdev->LSO_support)
mlx4_warn(mdev, "LSO not supported, please upgrade to later "
"FW version to enable LSO\n");
if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
MLX4_PERM_LOCAL_WRITE | MLX4_PERM_LOCAL_READ,
0, 0, &mdev->mr)) {
mlx4_err(mdev, "Failed allocating memory region\n");
goto err_map;
}
if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
mlx4_err(mdev, "Failed enabling memory region\n");
goto err_mr;
}
/* Build device profile according to supplied module parameters */
err = mlx4_en_get_profile(mdev);
if (err) {
mlx4_err(mdev, "Bad module parameters, aborting.\n");
goto err_mr;
}
/* Configure which ports to start according to module parameters */
mdev->port_cnt = 0;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
mdev->port_cnt++;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
if (!dev->caps.comp_pool) {
mdev->profile.prof[i].rx_ring_num =
rounddown_pow_of_two(max_t(int, MIN_RX_RINGS,
min_t(int,
dev->caps.num_comp_vectors,
MAX_RX_RINGS)));
} else {
mdev->profile.prof[i].rx_ring_num = rounddown_pow_of_two(
min_t(int, dev->caps.comp_pool/
dev->caps.num_ports - 1 , MAX_MSIX_P_PORT - 1));
}
}
/* Create our own workqueue for reset/multicast tasks
* Note: we cannot use the shared workqueue because of deadlocks caused
* by the rtnl lock */
mdev->workqueue = create_singlethread_workqueue("mlx4_en");
if (!mdev->workqueue) {
err = -ENOMEM;
goto err_mr;
}
/* At this stage all non-port specific tasks are complete:
* mark the card state as up */
mutex_init(&mdev->state_lock);
mdev->device_up = true;
/* Setup ports */
/* Create a netdev for each port */
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
mlx4_info(mdev, "Activating port:%d\n", i);
if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
mdev->pndev[i] = NULL;
}
return mdev;
err_mr:
mlx4_mr_free(dev, &mdev->mr);
err_map:
if (!mdev->uar_map)
iounmap(mdev->uar_map);
err_uar:
mlx4_uar_free(dev, &mdev->priv_uar);
err_pd:
mlx4_pd_free(dev, mdev->priv_pdn);
err_free_dev:
kfree(mdev);
err_free_res:
return NULL;
}
static struct mlx4_interface mlx4_en_interface = {
.add = mlx4_en_add,
.remove = mlx4_en_remove,
.event = mlx4_en_event,
.get_dev = mlx4_en_get_netdev,
.protocol = MLX4_PROT_ETH,
};
static int __init mlx4_en_init(void)
{
return mlx4_register_interface(&mlx4_en_interface);
}
static void __exit mlx4_en_cleanup(void)
{
mlx4_unregister_interface(&mlx4_en_interface);
}
module_init(mlx4_en_init);
module_exit(mlx4_en_cleanup);