| /* Copyright (c) 2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| #include <linux/watchdog.h> |
| |
| #define WDT_RST 0x38 |
| #define WDT_EN 0x40 |
| #define WDT_BITE_TIME 0x5C |
| |
| struct qcom_wdt { |
| struct watchdog_device wdd; |
| struct clk *clk; |
| unsigned long rate; |
| struct notifier_block restart_nb; |
| void __iomem *base; |
| }; |
| |
| static inline |
| struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd) |
| { |
| return container_of(wdd, struct qcom_wdt, wdd); |
| } |
| |
| static int qcom_wdt_start(struct watchdog_device *wdd) |
| { |
| struct qcom_wdt *wdt = to_qcom_wdt(wdd); |
| |
| writel(0, wdt->base + WDT_EN); |
| writel(1, wdt->base + WDT_RST); |
| writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME); |
| writel(1, wdt->base + WDT_EN); |
| return 0; |
| } |
| |
| static int qcom_wdt_stop(struct watchdog_device *wdd) |
| { |
| struct qcom_wdt *wdt = to_qcom_wdt(wdd); |
| |
| writel(0, wdt->base + WDT_EN); |
| return 0; |
| } |
| |
| static int qcom_wdt_ping(struct watchdog_device *wdd) |
| { |
| struct qcom_wdt *wdt = to_qcom_wdt(wdd); |
| |
| writel(1, wdt->base + WDT_RST); |
| return 0; |
| } |
| |
| static int qcom_wdt_set_timeout(struct watchdog_device *wdd, |
| unsigned int timeout) |
| { |
| wdd->timeout = timeout; |
| return qcom_wdt_start(wdd); |
| } |
| |
| static const struct watchdog_ops qcom_wdt_ops = { |
| .start = qcom_wdt_start, |
| .stop = qcom_wdt_stop, |
| .ping = qcom_wdt_ping, |
| .set_timeout = qcom_wdt_set_timeout, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct watchdog_info qcom_wdt_info = { |
| .options = WDIOF_KEEPALIVEPING |
| | WDIOF_MAGICCLOSE |
| | WDIOF_SETTIMEOUT, |
| .identity = KBUILD_MODNAME, |
| }; |
| |
| static int qcom_wdt_restart(struct notifier_block *nb, unsigned long action, |
| void *data) |
| { |
| struct qcom_wdt *wdt = container_of(nb, struct qcom_wdt, restart_nb); |
| u32 timeout; |
| |
| /* |
| * Trigger watchdog bite: |
| * Setup BITE_TIME to be 128ms, and enable WDT. |
| */ |
| timeout = 128 * wdt->rate / 1000; |
| |
| writel(0, wdt->base + WDT_EN); |
| writel(1, wdt->base + WDT_RST); |
| writel(timeout, wdt->base + WDT_BITE_TIME); |
| writel(1, wdt->base + WDT_EN); |
| |
| /* |
| * Actually make sure the above sequence hits hardware before sleeping. |
| */ |
| wmb(); |
| |
| msleep(150); |
| return NOTIFY_DONE; |
| } |
| |
| static int qcom_wdt_probe(struct platform_device *pdev) |
| { |
| struct qcom_wdt *wdt; |
| struct resource *res; |
| struct device_node *np = pdev->dev.of_node; |
| u32 percpu_offset; |
| int ret; |
| |
| wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| /* We use CPU0's DGT for the watchdog */ |
| if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) |
| percpu_offset = 0; |
| |
| res->start += percpu_offset; |
| res->end += percpu_offset; |
| |
| wdt->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(wdt->base)) |
| return PTR_ERR(wdt->base); |
| |
| wdt->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(wdt->clk)) { |
| dev_err(&pdev->dev, "failed to get input clock\n"); |
| return PTR_ERR(wdt->clk); |
| } |
| |
| ret = clk_prepare_enable(wdt->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to setup clock\n"); |
| return ret; |
| } |
| |
| /* |
| * We use the clock rate to calculate the max timeout, so ensure it's |
| * not zero to avoid a divide-by-zero exception. |
| * |
| * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such |
| * that it would bite before a second elapses it's usefulness is |
| * limited. Bail if this is the case. |
| */ |
| wdt->rate = clk_get_rate(wdt->clk); |
| if (wdt->rate == 0 || |
| wdt->rate > 0x10000000U) { |
| dev_err(&pdev->dev, "invalid clock rate\n"); |
| ret = -EINVAL; |
| goto err_clk_unprepare; |
| } |
| |
| wdt->wdd.dev = &pdev->dev; |
| wdt->wdd.info = &qcom_wdt_info; |
| wdt->wdd.ops = &qcom_wdt_ops; |
| wdt->wdd.min_timeout = 1; |
| wdt->wdd.max_timeout = 0x10000000U / wdt->rate; |
| wdt->wdd.parent = &pdev->dev; |
| |
| /* |
| * If 'timeout-sec' unspecified in devicetree, assume a 30 second |
| * default, unless the max timeout is less than 30 seconds, then use |
| * the max instead. |
| */ |
| wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U); |
| watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev); |
| |
| ret = watchdog_register_device(&wdt->wdd); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register watchdog\n"); |
| goto err_clk_unprepare; |
| } |
| |
| /* |
| * WDT restart notifier has priority 0 (use as a last resort) |
| */ |
| wdt->restart_nb.notifier_call = qcom_wdt_restart; |
| ret = register_restart_handler(&wdt->restart_nb); |
| if (ret) |
| dev_err(&pdev->dev, "failed to setup restart handler\n"); |
| |
| platform_set_drvdata(pdev, wdt); |
| return 0; |
| |
| err_clk_unprepare: |
| clk_disable_unprepare(wdt->clk); |
| return ret; |
| } |
| |
| static int qcom_wdt_remove(struct platform_device *pdev) |
| { |
| struct qcom_wdt *wdt = platform_get_drvdata(pdev); |
| |
| unregister_restart_handler(&wdt->restart_nb); |
| watchdog_unregister_device(&wdt->wdd); |
| clk_disable_unprepare(wdt->clk); |
| return 0; |
| } |
| |
| static const struct of_device_id qcom_wdt_of_table[] = { |
| { .compatible = "qcom,kpss-timer" }, |
| { .compatible = "qcom,scss-timer" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_wdt_of_table); |
| |
| static struct platform_driver qcom_watchdog_driver = { |
| .probe = qcom_wdt_probe, |
| .remove = qcom_wdt_remove, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = qcom_wdt_of_table, |
| }, |
| }; |
| module_platform_driver(qcom_watchdog_driver); |
| |
| MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver"); |
| MODULE_LICENSE("GPL v2"); |