| /* |
| * Copyright (C) 2011 Instituto Nokia de Tecnologia |
| * |
| * Authors: |
| * Lauro Ramos Venancio <lauro.venancio@openbossa.org> |
| * Aloisio Almeida Jr <aloisio.almeida@openbossa.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the |
| * Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/nfc.h> |
| #include <linux/netdevice.h> |
| #include <net/nfc/nfc.h> |
| |
| #define VERSION "0.1" |
| |
| #define PN533_VENDOR_ID 0x4CC |
| #define PN533_PRODUCT_ID 0x2533 |
| |
| #define SCM_VENDOR_ID 0x4E6 |
| #define SCL3711_PRODUCT_ID 0x5591 |
| |
| static const struct usb_device_id pn533_table[] = { |
| { USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID) }, |
| { USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, pn533_table); |
| |
| /* frame definitions */ |
| #define PN533_FRAME_TAIL_SIZE 2 |
| #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ |
| PN533_FRAME_TAIL_SIZE) |
| #define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) |
| #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) |
| #define PN533_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) |
| |
| /* start of frame */ |
| #define PN533_SOF 0x00FF |
| |
| /* frame identifier: in/out/error */ |
| #define PN533_FRAME_IDENTIFIER(f) (f->data[0]) |
| #define PN533_DIR_OUT 0xD4 |
| #define PN533_DIR_IN 0xD5 |
| |
| /* PN533 Commands */ |
| #define PN533_FRAME_CMD(f) (f->data[1]) |
| #define PN533_FRAME_CMD_PARAMS_PTR(f) (&f->data[2]) |
| #define PN533_FRAME_CMD_PARAMS_LEN(f) (f->datalen - 2) |
| |
| #define PN533_CMD_GET_FIRMWARE_VERSION 0x02 |
| #define PN533_CMD_RF_CONFIGURATION 0x32 |
| #define PN533_CMD_IN_DATA_EXCHANGE 0x40 |
| #define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A |
| #define PN533_CMD_IN_ATR 0x50 |
| #define PN533_CMD_IN_RELEASE 0x52 |
| #define PN533_CMD_IN_JUMP_FOR_DEP 0x56 |
| |
| #define PN533_CMD_RESPONSE(cmd) (cmd + 1) |
| |
| /* PN533 Return codes */ |
| #define PN533_CMD_RET_MASK 0x3F |
| #define PN533_CMD_MI_MASK 0x40 |
| #define PN533_CMD_RET_SUCCESS 0x00 |
| |
| struct pn533; |
| |
| typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, |
| u8 *params, int params_len); |
| |
| /* structs for pn533 commands */ |
| |
| /* PN533_CMD_GET_FIRMWARE_VERSION */ |
| struct pn533_fw_version { |
| u8 ic; |
| u8 ver; |
| u8 rev; |
| u8 support; |
| }; |
| |
| /* PN533_CMD_RF_CONFIGURATION */ |
| #define PN533_CFGITEM_MAX_RETRIES 0x05 |
| |
| #define PN533_CONFIG_MAX_RETRIES_NO_RETRY 0x00 |
| #define PN533_CONFIG_MAX_RETRIES_ENDLESS 0xFF |
| |
| struct pn533_config_max_retries { |
| u8 mx_rty_atr; |
| u8 mx_rty_psl; |
| u8 mx_rty_passive_act; |
| } __packed; |
| |
| /* PN533_CMD_IN_LIST_PASSIVE_TARGET */ |
| |
| /* felica commands opcode */ |
| #define PN533_FELICA_OPC_SENSF_REQ 0 |
| #define PN533_FELICA_OPC_SENSF_RES 1 |
| /* felica SENSF_REQ parameters */ |
| #define PN533_FELICA_SENSF_SC_ALL 0xFFFF |
| #define PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE 0 |
| #define PN533_FELICA_SENSF_RC_SYSTEM_CODE 1 |
| #define PN533_FELICA_SENSF_RC_ADVANCED_PROTOCOL 2 |
| |
| /* type B initiator_data values */ |
| #define PN533_TYPE_B_AFI_ALL_FAMILIES 0 |
| #define PN533_TYPE_B_POLL_METHOD_TIMESLOT 0 |
| #define PN533_TYPE_B_POLL_METHOD_PROBABILISTIC 1 |
| |
| union pn533_cmd_poll_initdata { |
| struct { |
| u8 afi; |
| u8 polling_method; |
| } __packed type_b; |
| struct { |
| u8 opcode; |
| __be16 sc; |
| u8 rc; |
| u8 tsn; |
| } __packed felica; |
| }; |
| |
| /* Poll modulations */ |
| enum { |
| PN533_POLL_MOD_106KBPS_A, |
| PN533_POLL_MOD_212KBPS_FELICA, |
| PN533_POLL_MOD_424KBPS_FELICA, |
| PN533_POLL_MOD_106KBPS_JEWEL, |
| PN533_POLL_MOD_847KBPS_B, |
| |
| __PN533_POLL_MOD_AFTER_LAST, |
| }; |
| #define PN533_POLL_MOD_MAX (__PN533_POLL_MOD_AFTER_LAST - 1) |
| |
| struct pn533_poll_modulations { |
| struct { |
| u8 maxtg; |
| u8 brty; |
| union pn533_cmd_poll_initdata initiator_data; |
| } __packed data; |
| u8 len; |
| }; |
| |
| const struct pn533_poll_modulations poll_mod[] = { |
| [PN533_POLL_MOD_106KBPS_A] = { |
| .data = { |
| .maxtg = 1, |
| .brty = 0, |
| }, |
| .len = 2, |
| }, |
| [PN533_POLL_MOD_212KBPS_FELICA] = { |
| .data = { |
| .maxtg = 1, |
| .brty = 1, |
| .initiator_data.felica = { |
| .opcode = PN533_FELICA_OPC_SENSF_REQ, |
| .sc = PN533_FELICA_SENSF_SC_ALL, |
| .rc = PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE, |
| .tsn = 0, |
| }, |
| }, |
| .len = 7, |
| }, |
| [PN533_POLL_MOD_424KBPS_FELICA] = { |
| .data = { |
| .maxtg = 1, |
| .brty = 2, |
| .initiator_data.felica = { |
| .opcode = PN533_FELICA_OPC_SENSF_REQ, |
| .sc = PN533_FELICA_SENSF_SC_ALL, |
| .rc = PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE, |
| .tsn = 0, |
| }, |
| }, |
| .len = 7, |
| }, |
| [PN533_POLL_MOD_106KBPS_JEWEL] = { |
| .data = { |
| .maxtg = 1, |
| .brty = 4, |
| }, |
| .len = 2, |
| }, |
| [PN533_POLL_MOD_847KBPS_B] = { |
| .data = { |
| .maxtg = 1, |
| .brty = 8, |
| .initiator_data.type_b = { |
| .afi = PN533_TYPE_B_AFI_ALL_FAMILIES, |
| .polling_method = |
| PN533_TYPE_B_POLL_METHOD_TIMESLOT, |
| }, |
| }, |
| .len = 3, |
| }, |
| }; |
| |
| /* PN533_CMD_IN_ATR */ |
| |
| struct pn533_cmd_activate_param { |
| u8 tg; |
| u8 next; |
| } __packed; |
| |
| struct pn533_cmd_activate_response { |
| u8 status; |
| u8 nfcid3t[10]; |
| u8 didt; |
| u8 bst; |
| u8 brt; |
| u8 to; |
| u8 ppt; |
| /* optional */ |
| u8 gt[]; |
| } __packed; |
| |
| /* PN533_CMD_IN_JUMP_FOR_DEP */ |
| struct pn533_cmd_jump_dep { |
| u8 active; |
| u8 baud; |
| u8 next; |
| u8 gt[]; |
| } __packed; |
| |
| struct pn533_cmd_jump_dep_response { |
| u8 status; |
| u8 tg; |
| u8 nfcid3t[10]; |
| u8 didt; |
| u8 bst; |
| u8 brt; |
| u8 to; |
| u8 ppt; |
| /* optional */ |
| u8 gt[]; |
| } __packed; |
| |
| struct pn533 { |
| struct usb_device *udev; |
| struct usb_interface *interface; |
| struct nfc_dev *nfc_dev; |
| |
| struct urb *out_urb; |
| int out_maxlen; |
| struct pn533_frame *out_frame; |
| |
| struct urb *in_urb; |
| int in_maxlen; |
| struct pn533_frame *in_frame; |
| |
| struct tasklet_struct tasklet; |
| struct pn533_frame *tklt_in_frame; |
| int tklt_in_error; |
| |
| pn533_cmd_complete_t cmd_complete; |
| void *cmd_complete_arg; |
| struct semaphore cmd_lock; |
| u8 cmd; |
| |
| struct pn533_poll_modulations *poll_mod_active[PN533_POLL_MOD_MAX + 1]; |
| u8 poll_mod_count; |
| u8 poll_mod_curr; |
| u32 poll_protocols; |
| |
| u8 tgt_available_prots; |
| u8 tgt_active_prot; |
| }; |
| |
| struct pn533_frame { |
| u8 preamble; |
| __be16 start_frame; |
| u8 datalen; |
| u8 datalen_checksum; |
| u8 data[]; |
| } __packed; |
| |
| /* The rule: value + checksum = 0 */ |
| static inline u8 pn533_checksum(u8 value) |
| { |
| return ~value + 1; |
| } |
| |
| /* The rule: sum(data elements) + checksum = 0 */ |
| static u8 pn533_data_checksum(u8 *data, int datalen) |
| { |
| u8 sum = 0; |
| int i; |
| |
| for (i = 0; i < datalen; i++) |
| sum += data[i]; |
| |
| return pn533_checksum(sum); |
| } |
| |
| /** |
| * pn533_tx_frame_ack - create a ack frame |
| * @frame: The frame to be set as ack |
| * |
| * Ack is different type of standard frame. As a standard frame, it has |
| * preamble and start_frame. However the checksum of this frame must fail, |
| * i.e. datalen + datalen_checksum must NOT be zero. When the checksum test |
| * fails and datalen = 0 and datalen_checksum = 0xFF, the frame is a ack. |
| * After datalen_checksum field, the postamble is placed. |
| */ |
| static void pn533_tx_frame_ack(struct pn533_frame *frame) |
| { |
| frame->preamble = 0; |
| frame->start_frame = cpu_to_be16(PN533_SOF); |
| frame->datalen = 0; |
| frame->datalen_checksum = 0xFF; |
| /* data[0] is used as postamble */ |
| frame->data[0] = 0; |
| } |
| |
| static void pn533_tx_frame_init(struct pn533_frame *frame, u8 cmd) |
| { |
| frame->preamble = 0; |
| frame->start_frame = cpu_to_be16(PN533_SOF); |
| PN533_FRAME_IDENTIFIER(frame) = PN533_DIR_OUT; |
| PN533_FRAME_CMD(frame) = cmd; |
| frame->datalen = 2; |
| } |
| |
| static void pn533_tx_frame_finish(struct pn533_frame *frame) |
| { |
| frame->datalen_checksum = pn533_checksum(frame->datalen); |
| |
| PN533_FRAME_CHECKSUM(frame) = |
| pn533_data_checksum(frame->data, frame->datalen); |
| |
| PN533_FRAME_POSTAMBLE(frame) = 0; |
| } |
| |
| static bool pn533_rx_frame_is_valid(struct pn533_frame *frame) |
| { |
| u8 checksum; |
| |
| if (frame->start_frame != cpu_to_be16(PN533_SOF)) |
| return false; |
| |
| checksum = pn533_checksum(frame->datalen); |
| if (checksum != frame->datalen_checksum) |
| return false; |
| |
| checksum = pn533_data_checksum(frame->data, frame->datalen); |
| if (checksum != PN533_FRAME_CHECKSUM(frame)) |
| return false; |
| |
| return true; |
| } |
| |
| static bool pn533_rx_frame_is_ack(struct pn533_frame *frame) |
| { |
| if (frame->start_frame != cpu_to_be16(PN533_SOF)) |
| return false; |
| |
| if (frame->datalen != 0 || frame->datalen_checksum != 0xFF) |
| return false; |
| |
| return true; |
| } |
| |
| static bool pn533_rx_frame_is_cmd_response(struct pn533_frame *frame, u8 cmd) |
| { |
| return (PN533_FRAME_CMD(frame) == PN533_CMD_RESPONSE(cmd)); |
| } |
| |
| static void pn533_tasklet_cmd_complete(unsigned long arg) |
| { |
| struct pn533 *dev = (struct pn533 *) arg; |
| struct pn533_frame *in_frame = dev->tklt_in_frame; |
| int rc; |
| |
| if (dev->tklt_in_error) |
| rc = dev->cmd_complete(dev, dev->cmd_complete_arg, NULL, |
| dev->tklt_in_error); |
| else |
| rc = dev->cmd_complete(dev, dev->cmd_complete_arg, |
| PN533_FRAME_CMD_PARAMS_PTR(in_frame), |
| PN533_FRAME_CMD_PARAMS_LEN(in_frame)); |
| |
| if (rc != -EINPROGRESS) |
| up(&dev->cmd_lock); |
| } |
| |
| static void pn533_recv_response(struct urb *urb) |
| { |
| struct pn533 *dev = urb->context; |
| struct pn533_frame *in_frame; |
| |
| dev->tklt_in_frame = NULL; |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" |
| " status: %d", urb->status); |
| dev->tklt_in_error = urb->status; |
| goto sched_tasklet; |
| default: |
| nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:" |
| " %d", urb->status); |
| dev->tklt_in_error = urb->status; |
| goto sched_tasklet; |
| } |
| |
| in_frame = dev->in_urb->transfer_buffer; |
| |
| if (!pn533_rx_frame_is_valid(in_frame)) { |
| nfc_dev_err(&dev->interface->dev, "Received an invalid frame"); |
| dev->tklt_in_error = -EIO; |
| goto sched_tasklet; |
| } |
| |
| if (!pn533_rx_frame_is_cmd_response(in_frame, dev->cmd)) { |
| nfc_dev_err(&dev->interface->dev, "The received frame is not " |
| "response to the last command"); |
| dev->tklt_in_error = -EIO; |
| goto sched_tasklet; |
| } |
| |
| nfc_dev_dbg(&dev->interface->dev, "Received a valid frame"); |
| dev->tklt_in_error = 0; |
| dev->tklt_in_frame = in_frame; |
| |
| sched_tasklet: |
| tasklet_schedule(&dev->tasklet); |
| } |
| |
| static int pn533_submit_urb_for_response(struct pn533 *dev, gfp_t flags) |
| { |
| dev->in_urb->complete = pn533_recv_response; |
| |
| return usb_submit_urb(dev->in_urb, flags); |
| } |
| |
| static void pn533_recv_ack(struct urb *urb) |
| { |
| struct pn533 *dev = urb->context; |
| struct pn533_frame *in_frame; |
| int rc; |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" |
| " status: %d", urb->status); |
| dev->tklt_in_error = urb->status; |
| goto sched_tasklet; |
| default: |
| nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:" |
| " %d", urb->status); |
| dev->tklt_in_error = urb->status; |
| goto sched_tasklet; |
| } |
| |
| in_frame = dev->in_urb->transfer_buffer; |
| |
| if (!pn533_rx_frame_is_ack(in_frame)) { |
| nfc_dev_err(&dev->interface->dev, "Received an invalid ack"); |
| dev->tklt_in_error = -EIO; |
| goto sched_tasklet; |
| } |
| |
| nfc_dev_dbg(&dev->interface->dev, "Received a valid ack"); |
| |
| rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC); |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "usb_submit_urb failed with" |
| " result %d", rc); |
| dev->tklt_in_error = rc; |
| goto sched_tasklet; |
| } |
| |
| return; |
| |
| sched_tasklet: |
| dev->tklt_in_frame = NULL; |
| tasklet_schedule(&dev->tasklet); |
| } |
| |
| static int pn533_submit_urb_for_ack(struct pn533 *dev, gfp_t flags) |
| { |
| dev->in_urb->complete = pn533_recv_ack; |
| |
| return usb_submit_urb(dev->in_urb, flags); |
| } |
| |
| static int pn533_send_ack(struct pn533 *dev, gfp_t flags) |
| { |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| pn533_tx_frame_ack(dev->out_frame); |
| |
| dev->out_urb->transfer_buffer = dev->out_frame; |
| dev->out_urb->transfer_buffer_length = PN533_FRAME_ACK_SIZE; |
| rc = usb_submit_urb(dev->out_urb, flags); |
| |
| return rc; |
| } |
| |
| static int __pn533_send_cmd_frame_async(struct pn533 *dev, |
| struct pn533_frame *out_frame, |
| struct pn533_frame *in_frame, |
| int in_frame_len, |
| pn533_cmd_complete_t cmd_complete, |
| void *arg, gfp_t flags) |
| { |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", |
| PN533_FRAME_CMD(out_frame)); |
| |
| dev->cmd = PN533_FRAME_CMD(out_frame); |
| dev->cmd_complete = cmd_complete; |
| dev->cmd_complete_arg = arg; |
| |
| dev->out_urb->transfer_buffer = out_frame; |
| dev->out_urb->transfer_buffer_length = |
| PN533_FRAME_SIZE(out_frame); |
| |
| dev->in_urb->transfer_buffer = in_frame; |
| dev->in_urb->transfer_buffer_length = in_frame_len; |
| |
| rc = usb_submit_urb(dev->out_urb, flags); |
| if (rc) |
| return rc; |
| |
| rc = pn533_submit_urb_for_ack(dev, flags); |
| if (rc) |
| goto error; |
| |
| return 0; |
| |
| error: |
| usb_unlink_urb(dev->out_urb); |
| return rc; |
| } |
| |
| static int pn533_send_cmd_frame_async(struct pn533 *dev, |
| struct pn533_frame *out_frame, |
| struct pn533_frame *in_frame, |
| int in_frame_len, |
| pn533_cmd_complete_t cmd_complete, |
| void *arg, gfp_t flags) |
| { |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| if (down_trylock(&dev->cmd_lock)) |
| return -EBUSY; |
| |
| rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, |
| in_frame_len, cmd_complete, arg, flags); |
| if (rc) |
| goto error; |
| |
| return 0; |
| error: |
| up(&dev->cmd_lock); |
| return rc; |
| } |
| |
| struct pn533_sync_cmd_response { |
| int rc; |
| struct completion done; |
| }; |
| |
| static int pn533_sync_cmd_complete(struct pn533 *dev, void *_arg, |
| u8 *params, int params_len) |
| { |
| struct pn533_sync_cmd_response *arg = _arg; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| arg->rc = 0; |
| |
| if (params_len < 0) /* error */ |
| arg->rc = params_len; |
| |
| complete(&arg->done); |
| |
| return 0; |
| } |
| |
| static int pn533_send_cmd_frame_sync(struct pn533 *dev, |
| struct pn533_frame *out_frame, |
| struct pn533_frame *in_frame, |
| int in_frame_len) |
| { |
| int rc; |
| struct pn533_sync_cmd_response arg; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| init_completion(&arg.done); |
| |
| rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, |
| pn533_sync_cmd_complete, &arg, GFP_KERNEL); |
| if (rc) |
| return rc; |
| |
| wait_for_completion(&arg.done); |
| |
| return arg.rc; |
| } |
| |
| static void pn533_send_complete(struct urb *urb) |
| { |
| struct pn533 *dev = urb->context; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" |
| " status: %d", urb->status); |
| break; |
| default: |
| nfc_dev_dbg(&dev->interface->dev, "Nonzero urb status received:" |
| " %d", urb->status); |
| } |
| } |
| |
| struct pn533_target_type_a { |
| __be16 sens_res; |
| u8 sel_res; |
| u8 nfcid_len; |
| u8 nfcid_data[]; |
| } __packed; |
| |
| |
| #define PN533_TYPE_A_SENS_RES_NFCID1(x) ((u8)((be16_to_cpu(x) & 0x00C0) >> 6)) |
| #define PN533_TYPE_A_SENS_RES_SSD(x) ((u8)((be16_to_cpu(x) & 0x001F) >> 0)) |
| #define PN533_TYPE_A_SENS_RES_PLATCONF(x) ((u8)((be16_to_cpu(x) & 0x0F00) >> 8)) |
| |
| #define PN533_TYPE_A_SENS_RES_SSD_JEWEL 0x00 |
| #define PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL 0x0C |
| |
| #define PN533_TYPE_A_SEL_PROT(x) (((x) & 0x60) >> 5) |
| #define PN533_TYPE_A_SEL_CASCADE(x) (((x) & 0x04) >> 2) |
| |
| #define PN533_TYPE_A_SEL_PROT_MIFARE 0 |
| #define PN533_TYPE_A_SEL_PROT_ISO14443 1 |
| #define PN533_TYPE_A_SEL_PROT_DEP 2 |
| #define PN533_TYPE_A_SEL_PROT_ISO14443_DEP 3 |
| |
| static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a, |
| int target_data_len) |
| { |
| u8 ssd; |
| u8 platconf; |
| |
| if (target_data_len < sizeof(struct pn533_target_type_a)) |
| return false; |
| |
| /* The lenght check of nfcid[] and ats[] are not being performed because |
| the values are not being used */ |
| |
| /* Requirement 4.6.3.3 from NFC Forum Digital Spec */ |
| ssd = PN533_TYPE_A_SENS_RES_SSD(type_a->sens_res); |
| platconf = PN533_TYPE_A_SENS_RES_PLATCONF(type_a->sens_res); |
| |
| if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && |
| platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || |
| (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && |
| platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) |
| return false; |
| |
| /* Requirements 4.8.2.1, 4.8.2.3, 4.8.2.5 and 4.8.2.7 from NFC Forum */ |
| if (PN533_TYPE_A_SEL_CASCADE(type_a->sel_res) != 0) |
| return false; |
| |
| return true; |
| } |
| |
| static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data, |
| int tgt_data_len) |
| { |
| struct pn533_target_type_a *tgt_type_a; |
| |
| tgt_type_a = (struct pn533_target_type_a *) tgt_data; |
| |
| if (!pn533_target_type_a_is_valid(tgt_type_a, tgt_data_len)) |
| return -EPROTO; |
| |
| switch (PN533_TYPE_A_SEL_PROT(tgt_type_a->sel_res)) { |
| case PN533_TYPE_A_SEL_PROT_MIFARE: |
| nfc_tgt->supported_protocols = NFC_PROTO_MIFARE_MASK; |
| break; |
| case PN533_TYPE_A_SEL_PROT_ISO14443: |
| nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK; |
| break; |
| case PN533_TYPE_A_SEL_PROT_DEP: |
| nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK; |
| break; |
| case PN533_TYPE_A_SEL_PROT_ISO14443_DEP: |
| nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK | |
| NFC_PROTO_NFC_DEP_MASK; |
| break; |
| } |
| |
| nfc_tgt->sens_res = be16_to_cpu(tgt_type_a->sens_res); |
| nfc_tgt->sel_res = tgt_type_a->sel_res; |
| |
| return 0; |
| } |
| |
| struct pn533_target_felica { |
| u8 pol_res; |
| u8 opcode; |
| u8 nfcid2[8]; |
| u8 pad[8]; |
| /* optional */ |
| u8 syst_code[]; |
| } __packed; |
| |
| #define PN533_FELICA_SENSF_NFCID2_DEP_B1 0x01 |
| #define PN533_FELICA_SENSF_NFCID2_DEP_B2 0xFE |
| |
| static bool pn533_target_felica_is_valid(struct pn533_target_felica *felica, |
| int target_data_len) |
| { |
| if (target_data_len < sizeof(struct pn533_target_felica)) |
| return false; |
| |
| if (felica->opcode != PN533_FELICA_OPC_SENSF_RES) |
| return false; |
| |
| return true; |
| } |
| |
| static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data, |
| int tgt_data_len) |
| { |
| struct pn533_target_felica *tgt_felica; |
| |
| tgt_felica = (struct pn533_target_felica *) tgt_data; |
| |
| if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len)) |
| return -EPROTO; |
| |
| if (tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1 && |
| tgt_felica->nfcid2[1] == |
| PN533_FELICA_SENSF_NFCID2_DEP_B2) |
| nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK; |
| else |
| nfc_tgt->supported_protocols = NFC_PROTO_FELICA_MASK; |
| |
| return 0; |
| } |
| |
| struct pn533_target_jewel { |
| __be16 sens_res; |
| u8 jewelid[4]; |
| } __packed; |
| |
| static bool pn533_target_jewel_is_valid(struct pn533_target_jewel *jewel, |
| int target_data_len) |
| { |
| u8 ssd; |
| u8 platconf; |
| |
| if (target_data_len < sizeof(struct pn533_target_jewel)) |
| return false; |
| |
| /* Requirement 4.6.3.3 from NFC Forum Digital Spec */ |
| ssd = PN533_TYPE_A_SENS_RES_SSD(jewel->sens_res); |
| platconf = PN533_TYPE_A_SENS_RES_PLATCONF(jewel->sens_res); |
| |
| if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && |
| platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || |
| (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && |
| platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) |
| return false; |
| |
| return true; |
| } |
| |
| static int pn533_target_found_jewel(struct nfc_target *nfc_tgt, u8 *tgt_data, |
| int tgt_data_len) |
| { |
| struct pn533_target_jewel *tgt_jewel; |
| |
| tgt_jewel = (struct pn533_target_jewel *) tgt_data; |
| |
| if (!pn533_target_jewel_is_valid(tgt_jewel, tgt_data_len)) |
| return -EPROTO; |
| |
| nfc_tgt->supported_protocols = NFC_PROTO_JEWEL_MASK; |
| nfc_tgt->sens_res = be16_to_cpu(tgt_jewel->sens_res); |
| |
| return 0; |
| } |
| |
| struct pn533_type_b_prot_info { |
| u8 bitrate; |
| u8 fsci_type; |
| u8 fwi_adc_fo; |
| } __packed; |
| |
| #define PN533_TYPE_B_PROT_FCSI(x) (((x) & 0xF0) >> 4) |
| #define PN533_TYPE_B_PROT_TYPE(x) (((x) & 0x0F) >> 0) |
| #define PN533_TYPE_B_PROT_TYPE_RFU_MASK 0x8 |
| |
| struct pn533_type_b_sens_res { |
| u8 opcode; |
| u8 nfcid[4]; |
| u8 appdata[4]; |
| struct pn533_type_b_prot_info prot_info; |
| } __packed; |
| |
| #define PN533_TYPE_B_OPC_SENSB_RES 0x50 |
| |
| struct pn533_target_type_b { |
| struct pn533_type_b_sens_res sensb_res; |
| u8 attrib_res_len; |
| u8 attrib_res[]; |
| } __packed; |
| |
| static bool pn533_target_type_b_is_valid(struct pn533_target_type_b *type_b, |
| int target_data_len) |
| { |
| if (target_data_len < sizeof(struct pn533_target_type_b)) |
| return false; |
| |
| if (type_b->sensb_res.opcode != PN533_TYPE_B_OPC_SENSB_RES) |
| return false; |
| |
| if (PN533_TYPE_B_PROT_TYPE(type_b->sensb_res.prot_info.fsci_type) & |
| PN533_TYPE_B_PROT_TYPE_RFU_MASK) |
| return false; |
| |
| return true; |
| } |
| |
| static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data, |
| int tgt_data_len) |
| { |
| struct pn533_target_type_b *tgt_type_b; |
| |
| tgt_type_b = (struct pn533_target_type_b *) tgt_data; |
| |
| if (!pn533_target_type_b_is_valid(tgt_type_b, tgt_data_len)) |
| return -EPROTO; |
| |
| nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK; |
| |
| return 0; |
| } |
| |
| struct pn533_poll_response { |
| u8 nbtg; |
| u8 tg; |
| u8 target_data[]; |
| } __packed; |
| |
| static int pn533_target_found(struct pn533 *dev, |
| struct pn533_poll_response *resp, int resp_len) |
| { |
| int target_data_len; |
| struct nfc_target nfc_tgt; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s - modulation=%d", __func__, |
| dev->poll_mod_curr); |
| |
| if (resp->tg != 1) |
| return -EPROTO; |
| |
| target_data_len = resp_len - sizeof(struct pn533_poll_response); |
| |
| switch (dev->poll_mod_curr) { |
| case PN533_POLL_MOD_106KBPS_A: |
| rc = pn533_target_found_type_a(&nfc_tgt, resp->target_data, |
| target_data_len); |
| break; |
| case PN533_POLL_MOD_212KBPS_FELICA: |
| case PN533_POLL_MOD_424KBPS_FELICA: |
| rc = pn533_target_found_felica(&nfc_tgt, resp->target_data, |
| target_data_len); |
| break; |
| case PN533_POLL_MOD_106KBPS_JEWEL: |
| rc = pn533_target_found_jewel(&nfc_tgt, resp->target_data, |
| target_data_len); |
| break; |
| case PN533_POLL_MOD_847KBPS_B: |
| rc = pn533_target_found_type_b(&nfc_tgt, resp->target_data, |
| target_data_len); |
| break; |
| default: |
| nfc_dev_err(&dev->interface->dev, "Unknown current poll" |
| " modulation"); |
| return -EPROTO; |
| } |
| |
| if (rc) |
| return rc; |
| |
| if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) { |
| nfc_dev_dbg(&dev->interface->dev, "The target found does not" |
| " have the desired protocol"); |
| return -EAGAIN; |
| } |
| |
| nfc_dev_dbg(&dev->interface->dev, "Target found - supported protocols: " |
| "0x%x", nfc_tgt.supported_protocols); |
| |
| dev->tgt_available_prots = nfc_tgt.supported_protocols; |
| |
| nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1); |
| |
| return 0; |
| } |
| |
| static void pn533_poll_reset_mod_list(struct pn533 *dev) |
| { |
| dev->poll_mod_count = 0; |
| } |
| |
| static void pn533_poll_add_mod(struct pn533 *dev, u8 mod_index) |
| { |
| dev->poll_mod_active[dev->poll_mod_count] = |
| (struct pn533_poll_modulations *) &poll_mod[mod_index]; |
| dev->poll_mod_count++; |
| } |
| |
| static void pn533_poll_create_mod_list(struct pn533 *dev, u32 protocols) |
| { |
| pn533_poll_reset_mod_list(dev); |
| |
| if (protocols & NFC_PROTO_MIFARE_MASK |
| || protocols & NFC_PROTO_ISO14443_MASK |
| || protocols & NFC_PROTO_NFC_DEP_MASK) |
| pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_A); |
| |
| if (protocols & NFC_PROTO_FELICA_MASK |
| || protocols & NFC_PROTO_NFC_DEP_MASK) { |
| pn533_poll_add_mod(dev, PN533_POLL_MOD_212KBPS_FELICA); |
| pn533_poll_add_mod(dev, PN533_POLL_MOD_424KBPS_FELICA); |
| } |
| |
| if (protocols & NFC_PROTO_JEWEL_MASK) |
| pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_JEWEL); |
| |
| if (protocols & NFC_PROTO_ISO14443_MASK) |
| pn533_poll_add_mod(dev, PN533_POLL_MOD_847KBPS_B); |
| } |
| |
| static void pn533_start_poll_frame(struct pn533_frame *frame, |
| struct pn533_poll_modulations *mod) |
| { |
| |
| pn533_tx_frame_init(frame, PN533_CMD_IN_LIST_PASSIVE_TARGET); |
| |
| memcpy(PN533_FRAME_CMD_PARAMS_PTR(frame), &mod->data, mod->len); |
| frame->datalen += mod->len; |
| |
| pn533_tx_frame_finish(frame); |
| } |
| |
| static int pn533_start_poll_complete(struct pn533 *dev, void *arg, |
| u8 *params, int params_len) |
| { |
| struct pn533_poll_response *resp; |
| struct pn533_poll_modulations *next_mod; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| if (params_len == -ENOENT) { |
| nfc_dev_dbg(&dev->interface->dev, "Polling operation has been" |
| " stopped"); |
| goto stop_poll; |
| } |
| |
| if (params_len < 0) { |
| nfc_dev_err(&dev->interface->dev, "Error %d when running poll", |
| params_len); |
| goto stop_poll; |
| } |
| |
| resp = (struct pn533_poll_response *) params; |
| if (resp->nbtg) { |
| rc = pn533_target_found(dev, resp, params_len); |
| |
| /* We must stop the poll after a valid target found */ |
| if (rc == 0) |
| goto stop_poll; |
| |
| if (rc != -EAGAIN) |
| nfc_dev_err(&dev->interface->dev, "The target found is" |
| " not valid - continuing to poll"); |
| } |
| |
| dev->poll_mod_curr = (dev->poll_mod_curr + 1) % dev->poll_mod_count; |
| |
| next_mod = dev->poll_mod_active[dev->poll_mod_curr]; |
| |
| nfc_dev_dbg(&dev->interface->dev, "Polling next modulation (0x%x)", |
| dev->poll_mod_curr); |
| |
| pn533_start_poll_frame(dev->out_frame, next_mod); |
| |
| /* Don't need to down the semaphore again */ |
| rc = __pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen, pn533_start_poll_complete, |
| NULL, GFP_ATOMIC); |
| |
| if (rc == -EPERM) { |
| nfc_dev_dbg(&dev->interface->dev, "Cannot poll next modulation" |
| " because poll has been stopped"); |
| goto stop_poll; |
| } |
| |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "Error %d when trying to poll" |
| " next modulation", rc); |
| goto stop_poll; |
| } |
| |
| /* Inform caller function to do not up the semaphore */ |
| return -EINPROGRESS; |
| |
| stop_poll: |
| pn533_poll_reset_mod_list(dev); |
| dev->poll_protocols = 0; |
| return 0; |
| } |
| |
| static int pn533_start_poll(struct nfc_dev *nfc_dev, u32 protocols) |
| { |
| struct pn533 *dev = nfc_get_drvdata(nfc_dev); |
| struct pn533_poll_modulations *start_mod; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s - protocols=0x%x", __func__, |
| protocols); |
| |
| if (dev->poll_mod_count) { |
| nfc_dev_err(&dev->interface->dev, "Polling operation already" |
| " active"); |
| return -EBUSY; |
| } |
| |
| if (dev->tgt_active_prot) { |
| nfc_dev_err(&dev->interface->dev, "Cannot poll with a target" |
| " already activated"); |
| return -EBUSY; |
| } |
| |
| pn533_poll_create_mod_list(dev, protocols); |
| |
| if (!dev->poll_mod_count) { |
| nfc_dev_err(&dev->interface->dev, "No valid protocols" |
| " specified"); |
| rc = -EINVAL; |
| goto error; |
| } |
| |
| nfc_dev_dbg(&dev->interface->dev, "It will poll %d modulations types", |
| dev->poll_mod_count); |
| |
| dev->poll_mod_curr = 0; |
| start_mod = dev->poll_mod_active[dev->poll_mod_curr]; |
| |
| pn533_start_poll_frame(dev->out_frame, start_mod); |
| |
| rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen, pn533_start_poll_complete, |
| NULL, GFP_KERNEL); |
| |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "Error %d when trying to" |
| " start poll", rc); |
| goto error; |
| } |
| |
| dev->poll_protocols = protocols; |
| |
| return 0; |
| |
| error: |
| pn533_poll_reset_mod_list(dev); |
| return rc; |
| } |
| |
| static void pn533_stop_poll(struct nfc_dev *nfc_dev) |
| { |
| struct pn533 *dev = nfc_get_drvdata(nfc_dev); |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| if (!dev->poll_mod_count) { |
| nfc_dev_dbg(&dev->interface->dev, "Polling operation was not" |
| " running"); |
| return; |
| } |
| |
| /* An ack will cancel the last issued command (poll) */ |
| pn533_send_ack(dev, GFP_KERNEL); |
| |
| /* prevent pn533_start_poll_complete to issue a new poll meanwhile */ |
| usb_kill_urb(dev->in_urb); |
| } |
| |
| static int pn533_activate_target_nfcdep(struct pn533 *dev) |
| { |
| struct pn533_cmd_activate_param param; |
| struct pn533_cmd_activate_response *resp; |
| u16 gt_len; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_ATR); |
| |
| param.tg = 1; |
| param.next = 0; |
| memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), ¶m, |
| sizeof(struct pn533_cmd_activate_param)); |
| dev->out_frame->datalen += sizeof(struct pn533_cmd_activate_param); |
| |
| pn533_tx_frame_finish(dev->out_frame); |
| |
| rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen); |
| if (rc) |
| return rc; |
| |
| resp = (struct pn533_cmd_activate_response *) |
| PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame); |
| rc = resp->status & PN533_CMD_RET_MASK; |
| if (rc != PN533_CMD_RET_SUCCESS) |
| return -EIO; |
| |
| /* ATR_RES general bytes are located at offset 16 */ |
| gt_len = PN533_FRAME_CMD_PARAMS_LEN(dev->in_frame) - 16; |
| rc = nfc_set_remote_general_bytes(dev->nfc_dev, resp->gt, gt_len); |
| |
| return rc; |
| } |
| |
| static int pn533_activate_target(struct nfc_dev *nfc_dev, u32 target_idx, |
| u32 protocol) |
| { |
| struct pn533 *dev = nfc_get_drvdata(nfc_dev); |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s - protocol=%u", __func__, |
| protocol); |
| |
| if (dev->poll_mod_count) { |
| nfc_dev_err(&dev->interface->dev, "Cannot activate while" |
| " polling"); |
| return -EBUSY; |
| } |
| |
| if (dev->tgt_active_prot) { |
| nfc_dev_err(&dev->interface->dev, "There is already an active" |
| " target"); |
| return -EBUSY; |
| } |
| |
| if (!dev->tgt_available_prots) { |
| nfc_dev_err(&dev->interface->dev, "There is no available target" |
| " to activate"); |
| return -EINVAL; |
| } |
| |
| if (!(dev->tgt_available_prots & (1 << protocol))) { |
| nfc_dev_err(&dev->interface->dev, "The target does not support" |
| " the requested protocol %u", protocol); |
| return -EINVAL; |
| } |
| |
| if (protocol == NFC_PROTO_NFC_DEP) { |
| rc = pn533_activate_target_nfcdep(dev); |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "Error %d when" |
| " activating target with" |
| " NFC_DEP protocol", rc); |
| return rc; |
| } |
| } |
| |
| dev->tgt_active_prot = protocol; |
| dev->tgt_available_prots = 0; |
| |
| return 0; |
| } |
| |
| static void pn533_deactivate_target(struct nfc_dev *nfc_dev, u32 target_idx) |
| { |
| struct pn533 *dev = nfc_get_drvdata(nfc_dev); |
| u8 tg; |
| u8 status; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| if (!dev->tgt_active_prot) { |
| nfc_dev_err(&dev->interface->dev, "There is no active target"); |
| return; |
| } |
| |
| dev->tgt_active_prot = 0; |
| |
| pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_RELEASE); |
| |
| tg = 1; |
| memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), &tg, sizeof(u8)); |
| dev->out_frame->datalen += sizeof(u8); |
| |
| pn533_tx_frame_finish(dev->out_frame); |
| |
| rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen); |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "Error when sending release" |
| " command to the controller"); |
| return; |
| } |
| |
| status = PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame)[0]; |
| rc = status & PN533_CMD_RET_MASK; |
| if (rc != PN533_CMD_RET_SUCCESS) |
| nfc_dev_err(&dev->interface->dev, "Error 0x%x when releasing" |
| " the target", rc); |
| |
| return; |
| } |
| |
| |
| static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, |
| u8 *params, int params_len) |
| { |
| struct pn533_cmd_jump_dep *cmd; |
| struct pn533_cmd_jump_dep_response *resp; |
| struct nfc_target nfc_target; |
| u8 target_gt_len; |
| int rc; |
| |
| if (params_len == -ENOENT) { |
| nfc_dev_dbg(&dev->interface->dev, ""); |
| return 0; |
| } |
| |
| if (params_len < 0) { |
| nfc_dev_err(&dev->interface->dev, |
| "Error %d when bringing DEP link up", |
| params_len); |
| return 0; |
| } |
| |
| if (dev->tgt_available_prots && |
| !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) { |
| nfc_dev_err(&dev->interface->dev, |
| "The target does not support DEP"); |
| return -EINVAL; |
| } |
| |
| resp = (struct pn533_cmd_jump_dep_response *) params; |
| cmd = (struct pn533_cmd_jump_dep *) arg; |
| rc = resp->status & PN533_CMD_RET_MASK; |
| if (rc != PN533_CMD_RET_SUCCESS) { |
| nfc_dev_err(&dev->interface->dev, |
| "Bringing DEP link up failed %d", rc); |
| return 0; |
| } |
| |
| if (!dev->tgt_available_prots) { |
| nfc_dev_dbg(&dev->interface->dev, "Creating new target"); |
| |
| nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK; |
| rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1); |
| if (rc) |
| return 0; |
| |
| dev->tgt_available_prots = 0; |
| } |
| |
| dev->tgt_active_prot = NFC_PROTO_NFC_DEP; |
| |
| /* ATR_RES general bytes are located at offset 17 */ |
| target_gt_len = PN533_FRAME_CMD_PARAMS_LEN(dev->in_frame) - 17; |
| rc = nfc_set_remote_general_bytes(dev->nfc_dev, |
| resp->gt, target_gt_len); |
| if (rc == 0) |
| rc = nfc_dep_link_is_up(dev->nfc_dev, |
| dev->nfc_dev->targets[0].idx, |
| !cmd->active, NFC_RF_INITIATOR); |
| |
| return 0; |
| } |
| |
| static int pn533_dep_link_up(struct nfc_dev *nfc_dev, int target_idx, |
| u8 comm_mode, u8 rf_mode) |
| { |
| struct pn533 *dev = nfc_get_drvdata(nfc_dev); |
| struct pn533_cmd_jump_dep *cmd; |
| u8 cmd_len, local_gt_len, *local_gt; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| if (rf_mode == NFC_RF_TARGET) { |
| nfc_dev_err(&dev->interface->dev, "Target mode not supported"); |
| return -EOPNOTSUPP; |
| } |
| |
| |
| if (dev->poll_mod_count) { |
| nfc_dev_err(&dev->interface->dev, |
| "Cannot bring the DEP link up while polling"); |
| return -EBUSY; |
| } |
| |
| if (dev->tgt_active_prot) { |
| nfc_dev_err(&dev->interface->dev, |
| "There is already an active target"); |
| return -EBUSY; |
| } |
| |
| local_gt = nfc_get_local_general_bytes(dev->nfc_dev, &local_gt_len); |
| if (local_gt_len > NFC_MAX_GT_LEN) |
| return -EINVAL; |
| |
| cmd_len = sizeof(struct pn533_cmd_jump_dep) + local_gt_len; |
| cmd = kzalloc(cmd_len, GFP_KERNEL); |
| if (cmd == NULL) |
| return -ENOMEM; |
| |
| pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_JUMP_FOR_DEP); |
| |
| cmd->active = !comm_mode; |
| cmd->baud = 0; |
| if (local_gt != NULL) { |
| cmd->next = 4; /* We have some Gi */ |
| memcpy(cmd->gt, local_gt, local_gt_len); |
| } else { |
| cmd->next = 0; |
| } |
| |
| memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), cmd, cmd_len); |
| dev->out_frame->datalen += cmd_len; |
| |
| pn533_tx_frame_finish(dev->out_frame); |
| |
| rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen, pn533_in_dep_link_up_complete, |
| cmd, GFP_KERNEL); |
| if (rc) |
| goto out; |
| |
| |
| out: |
| kfree(cmd); |
| |
| return rc; |
| } |
| |
| static int pn533_dep_link_down(struct nfc_dev *nfc_dev) |
| { |
| pn533_deactivate_target(nfc_dev, 0); |
| |
| return 0; |
| } |
| |
| #define PN533_CMD_DATAEXCH_HEAD_LEN (sizeof(struct pn533_frame) + 3) |
| #define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 |
| |
| static int pn533_data_exchange_tx_frame(struct pn533 *dev, struct sk_buff *skb) |
| { |
| int payload_len = skb->len; |
| struct pn533_frame *out_frame; |
| u8 tg; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s - Sending %d bytes", __func__, |
| payload_len); |
| |
| if (payload_len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { |
| /* TODO: Implement support to multi-part data exchange */ |
| nfc_dev_err(&dev->interface->dev, "Data length greater than the" |
| " max allowed: %d", |
| PN533_CMD_DATAEXCH_DATA_MAXLEN); |
| return -ENOSYS; |
| } |
| |
| skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN); |
| out_frame = (struct pn533_frame *) skb->data; |
| |
| pn533_tx_frame_init(out_frame, PN533_CMD_IN_DATA_EXCHANGE); |
| |
| tg = 1; |
| memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame), &tg, sizeof(u8)); |
| out_frame->datalen += sizeof(u8); |
| |
| /* The data is already in the out_frame, just update the datalen */ |
| out_frame->datalen += payload_len; |
| |
| pn533_tx_frame_finish(out_frame); |
| skb_put(skb, PN533_FRAME_TAIL_SIZE); |
| |
| return 0; |
| } |
| |
| struct pn533_data_exchange_arg { |
| struct sk_buff *skb_resp; |
| struct sk_buff *skb_out; |
| data_exchange_cb_t cb; |
| void *cb_context; |
| }; |
| |
| static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, |
| u8 *params, int params_len) |
| { |
| struct pn533_data_exchange_arg *arg = _arg; |
| struct sk_buff *skb_resp = arg->skb_resp; |
| struct pn533_frame *in_frame = (struct pn533_frame *) skb_resp->data; |
| int err = 0; |
| u8 status; |
| u8 cmd_ret; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| dev_kfree_skb_irq(arg->skb_out); |
| |
| if (params_len < 0) { /* error */ |
| err = params_len; |
| goto error; |
| } |
| |
| skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); |
| |
| status = params[0]; |
| |
| cmd_ret = status & PN533_CMD_RET_MASK; |
| if (cmd_ret != PN533_CMD_RET_SUCCESS) { |
| nfc_dev_err(&dev->interface->dev, "PN533 reported error %d when" |
| " exchanging data", cmd_ret); |
| err = -EIO; |
| goto error; |
| } |
| |
| if (status & PN533_CMD_MI_MASK) { |
| /* TODO: Implement support to multi-part data exchange */ |
| nfc_dev_err(&dev->interface->dev, "Multi-part message not yet" |
| " supported"); |
| /* Prevent the other messages from controller */ |
| pn533_send_ack(dev, GFP_ATOMIC); |
| err = -ENOSYS; |
| goto error; |
| } |
| |
| skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); |
| skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_SIZE); |
| |
| arg->cb(arg->cb_context, skb_resp, 0); |
| kfree(arg); |
| return 0; |
| |
| error: |
| dev_kfree_skb_irq(skb_resp); |
| arg->cb(arg->cb_context, NULL, err); |
| kfree(arg); |
| return 0; |
| } |
| |
| static int pn533_data_exchange(struct nfc_dev *nfc_dev, u32 target_idx, |
| struct sk_buff *skb, |
| data_exchange_cb_t cb, |
| void *cb_context) |
| { |
| struct pn533 *dev = nfc_get_drvdata(nfc_dev); |
| struct pn533_frame *out_frame, *in_frame; |
| struct pn533_data_exchange_arg *arg; |
| struct sk_buff *skb_resp; |
| int skb_resp_len; |
| int rc; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| if (!dev->tgt_active_prot) { |
| nfc_dev_err(&dev->interface->dev, "Cannot exchange data if" |
| " there is no active target"); |
| rc = -EINVAL; |
| goto error; |
| } |
| |
| rc = pn533_data_exchange_tx_frame(dev, skb); |
| if (rc) |
| goto error; |
| |
| skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + |
| PN533_CMD_DATAEXCH_DATA_MAXLEN + |
| PN533_FRAME_TAIL_SIZE; |
| |
| skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); |
| if (!skb_resp) { |
| rc = -ENOMEM; |
| goto error; |
| } |
| |
| in_frame = (struct pn533_frame *) skb_resp->data; |
| out_frame = (struct pn533_frame *) skb->data; |
| |
| arg = kmalloc(sizeof(struct pn533_data_exchange_arg), GFP_KERNEL); |
| if (!arg) { |
| rc = -ENOMEM; |
| goto free_skb_resp; |
| } |
| |
| arg->skb_resp = skb_resp; |
| arg->skb_out = skb; |
| arg->cb = cb; |
| arg->cb_context = cb_context; |
| |
| rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, |
| pn533_data_exchange_complete, arg, |
| GFP_KERNEL); |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "Error %d when trying to" |
| " perform data_exchange", rc); |
| goto free_arg; |
| } |
| |
| return 0; |
| |
| free_arg: |
| kfree(arg); |
| free_skb_resp: |
| kfree_skb(skb_resp); |
| error: |
| kfree_skb(skb); |
| return rc; |
| } |
| |
| static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, |
| u8 cfgdata_len) |
| { |
| int rc; |
| u8 *params; |
| |
| nfc_dev_dbg(&dev->interface->dev, "%s", __func__); |
| |
| pn533_tx_frame_init(dev->out_frame, PN533_CMD_RF_CONFIGURATION); |
| |
| params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame); |
| params[0] = cfgitem; |
| memcpy(¶ms[1], cfgdata, cfgdata_len); |
| dev->out_frame->datalen += (1 + cfgdata_len); |
| |
| pn533_tx_frame_finish(dev->out_frame); |
| |
| rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen); |
| |
| return rc; |
| } |
| |
| struct nfc_ops pn533_nfc_ops = { |
| .dev_up = NULL, |
| .dev_down = NULL, |
| .dep_link_up = pn533_dep_link_up, |
| .dep_link_down = pn533_dep_link_down, |
| .start_poll = pn533_start_poll, |
| .stop_poll = pn533_stop_poll, |
| .activate_target = pn533_activate_target, |
| .deactivate_target = pn533_deactivate_target, |
| .data_exchange = pn533_data_exchange, |
| }; |
| |
| static int pn533_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct pn533_fw_version *fw_ver; |
| struct pn533 *dev; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| struct pn533_config_max_retries max_retries; |
| int in_endpoint = 0; |
| int out_endpoint = 0; |
| int rc = -ENOMEM; |
| int i; |
| u32 protocols; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| dev->udev = usb_get_dev(interface_to_usbdev(interface)); |
| dev->interface = interface; |
| sema_init(&dev->cmd_lock, 1); |
| |
| iface_desc = interface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| |
| if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) { |
| dev->in_maxlen = le16_to_cpu(endpoint->wMaxPacketSize); |
| in_endpoint = endpoint->bEndpointAddress; |
| } |
| |
| if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) { |
| dev->out_maxlen = |
| le16_to_cpu(endpoint->wMaxPacketSize); |
| out_endpoint = endpoint->bEndpointAddress; |
| } |
| } |
| |
| if (!in_endpoint || !out_endpoint) { |
| nfc_dev_err(&interface->dev, "Could not find bulk-in or" |
| " bulk-out endpoint"); |
| rc = -ENODEV; |
| goto error; |
| } |
| |
| dev->in_frame = kmalloc(dev->in_maxlen, GFP_KERNEL); |
| dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); |
| dev->out_frame = kmalloc(dev->out_maxlen, GFP_KERNEL); |
| dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); |
| |
| if (!dev->in_frame || !dev->out_frame || |
| !dev->in_urb || !dev->out_urb) |
| goto error; |
| |
| usb_fill_bulk_urb(dev->in_urb, dev->udev, |
| usb_rcvbulkpipe(dev->udev, in_endpoint), |
| NULL, 0, NULL, dev); |
| usb_fill_bulk_urb(dev->out_urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, out_endpoint), |
| NULL, 0, |
| pn533_send_complete, dev); |
| |
| tasklet_init(&dev->tasklet, pn533_tasklet_cmd_complete, (ulong)dev); |
| |
| usb_set_intfdata(interface, dev); |
| |
| pn533_tx_frame_init(dev->out_frame, PN533_CMD_GET_FIRMWARE_VERSION); |
| pn533_tx_frame_finish(dev->out_frame); |
| |
| rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, |
| dev->in_maxlen); |
| if (rc) |
| goto kill_tasklet; |
| |
| fw_ver = (struct pn533_fw_version *) |
| PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame); |
| nfc_dev_info(&dev->interface->dev, "NXP PN533 firmware ver %d.%d now" |
| " attached", fw_ver->ver, fw_ver->rev); |
| |
| protocols = NFC_PROTO_JEWEL_MASK |
| | NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK |
| | NFC_PROTO_ISO14443_MASK |
| | NFC_PROTO_NFC_DEP_MASK; |
| |
| dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, |
| PN533_CMD_DATAEXCH_HEAD_LEN, |
| PN533_FRAME_TAIL_SIZE); |
| if (!dev->nfc_dev) |
| goto kill_tasklet; |
| |
| nfc_set_parent_dev(dev->nfc_dev, &interface->dev); |
| nfc_set_drvdata(dev->nfc_dev, dev); |
| |
| rc = nfc_register_device(dev->nfc_dev); |
| if (rc) |
| goto free_nfc_dev; |
| |
| max_retries.mx_rty_atr = PN533_CONFIG_MAX_RETRIES_ENDLESS; |
| max_retries.mx_rty_psl = 2; |
| max_retries.mx_rty_passive_act = PN533_CONFIG_MAX_RETRIES_NO_RETRY; |
| |
| rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES, |
| (u8 *) &max_retries, sizeof(max_retries)); |
| |
| if (rc) { |
| nfc_dev_err(&dev->interface->dev, "Error on setting MAX_RETRIES" |
| " config"); |
| goto free_nfc_dev; |
| } |
| |
| return 0; |
| |
| free_nfc_dev: |
| nfc_free_device(dev->nfc_dev); |
| kill_tasklet: |
| tasklet_kill(&dev->tasklet); |
| error: |
| kfree(dev->in_frame); |
| usb_free_urb(dev->in_urb); |
| kfree(dev->out_frame); |
| usb_free_urb(dev->out_urb); |
| kfree(dev); |
| return rc; |
| } |
| |
| static void pn533_disconnect(struct usb_interface *interface) |
| { |
| struct pn533 *dev; |
| |
| dev = usb_get_intfdata(interface); |
| usb_set_intfdata(interface, NULL); |
| |
| nfc_unregister_device(dev->nfc_dev); |
| nfc_free_device(dev->nfc_dev); |
| |
| usb_kill_urb(dev->in_urb); |
| usb_kill_urb(dev->out_urb); |
| |
| tasklet_kill(&dev->tasklet); |
| |
| kfree(dev->in_frame); |
| usb_free_urb(dev->in_urb); |
| kfree(dev->out_frame); |
| usb_free_urb(dev->out_urb); |
| kfree(dev); |
| |
| nfc_dev_info(&interface->dev, "NXP PN533 NFC device disconnected"); |
| } |
| |
| static struct usb_driver pn533_driver = { |
| .name = "pn533", |
| .probe = pn533_probe, |
| .disconnect = pn533_disconnect, |
| .id_table = pn533_table, |
| }; |
| |
| module_usb_driver(pn533_driver); |
| |
| MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>," |
| " Aloisio Almeida Jr <aloisio.almeida@openbossa.org>"); |
| MODULE_DESCRIPTION("PN533 usb driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |