| /* |
| * drivers/usb/otg/ab8500_usb.c |
| * |
| * USB transceiver driver for AB8500 chip |
| * |
| * Copyright (C) 2010 ST-Ericsson AB |
| * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb/otg.h> |
| #include <linux/slab.h> |
| #include <linux/notifier.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/abx500.h> |
| #include <linux/mfd/abx500/ab8500.h> |
| |
| #define AB8500_MAIN_WD_CTRL_REG 0x01 |
| #define AB8500_USB_LINE_STAT_REG 0x80 |
| #define AB8500_USB_PHY_CTRL_REG 0x8A |
| |
| #define AB8500_BIT_OTG_STAT_ID (1 << 0) |
| #define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) |
| #define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) |
| #define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) |
| #define AB8500_BIT_WD_CTRL_KICK (1 << 1) |
| |
| #define AB8500_V1x_LINK_STAT_WAIT (HZ/10) |
| #define AB8500_WD_KICK_DELAY_US 100 /* usec */ |
| #define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ |
| #define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ |
| |
| /* Usb line status register */ |
| enum ab8500_usb_link_status { |
| USB_LINK_NOT_CONFIGURED = 0, |
| USB_LINK_STD_HOST_NC, |
| USB_LINK_STD_HOST_C_NS, |
| USB_LINK_STD_HOST_C_S, |
| USB_LINK_HOST_CHG_NM, |
| USB_LINK_HOST_CHG_HS, |
| USB_LINK_HOST_CHG_HS_CHIRP, |
| USB_LINK_DEDICATED_CHG, |
| USB_LINK_ACA_RID_A, |
| USB_LINK_ACA_RID_B, |
| USB_LINK_ACA_RID_C_NM, |
| USB_LINK_ACA_RID_C_HS, |
| USB_LINK_ACA_RID_C_HS_CHIRP, |
| USB_LINK_HM_IDGND, |
| USB_LINK_RESERVED, |
| USB_LINK_NOT_VALID_LINK |
| }; |
| |
| struct ab8500_usb { |
| struct otg_transceiver otg; |
| struct device *dev; |
| int irq_num_id_rise; |
| int irq_num_id_fall; |
| int irq_num_vbus_rise; |
| int irq_num_vbus_fall; |
| int irq_num_link_status; |
| unsigned vbus_draw; |
| struct delayed_work dwork; |
| struct work_struct phy_dis_work; |
| unsigned long link_status_wait; |
| int rev; |
| }; |
| |
| static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x) |
| { |
| return container_of(x, struct ab8500_usb, otg); |
| } |
| |
| static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) |
| { |
| abx500_set_register_interruptible(ab->dev, |
| AB8500_SYS_CTRL2_BLOCK, |
| AB8500_MAIN_WD_CTRL_REG, |
| AB8500_BIT_WD_CTRL_ENABLE); |
| |
| udelay(AB8500_WD_KICK_DELAY_US); |
| |
| abx500_set_register_interruptible(ab->dev, |
| AB8500_SYS_CTRL2_BLOCK, |
| AB8500_MAIN_WD_CTRL_REG, |
| (AB8500_BIT_WD_CTRL_ENABLE |
| | AB8500_BIT_WD_CTRL_KICK)); |
| |
| if (ab->rev > 0x10) /* v1.1 v2.0 */ |
| udelay(AB8500_WD_V11_DISABLE_DELAY_US); |
| else /* v1.0 */ |
| msleep(AB8500_WD_V10_DISABLE_DELAY_MS); |
| |
| abx500_set_register_interruptible(ab->dev, |
| AB8500_SYS_CTRL2_BLOCK, |
| AB8500_MAIN_WD_CTRL_REG, |
| 0); |
| } |
| |
| static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, |
| bool enable) |
| { |
| u8 ctrl_reg; |
| abx500_get_register_interruptible(ab->dev, |
| AB8500_USB, |
| AB8500_USB_PHY_CTRL_REG, |
| &ctrl_reg); |
| if (sel_host) { |
| if (enable) |
| ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; |
| else |
| ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; |
| } else { |
| if (enable) |
| ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; |
| else |
| ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; |
| } |
| |
| abx500_set_register_interruptible(ab->dev, |
| AB8500_USB, |
| AB8500_USB_PHY_CTRL_REG, |
| ctrl_reg); |
| |
| /* Needed to enable the phy.*/ |
| if (enable) |
| ab8500_usb_wd_workaround(ab); |
| } |
| |
| #define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true) |
| #define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false) |
| #define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true) |
| #define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false) |
| |
| static int ab8500_usb_link_status_update(struct ab8500_usb *ab) |
| { |
| u8 reg; |
| enum ab8500_usb_link_status lsts; |
| void *v = NULL; |
| enum usb_xceiv_events event; |
| |
| abx500_get_register_interruptible(ab->dev, |
| AB8500_USB, |
| AB8500_USB_LINE_STAT_REG, |
| ®); |
| |
| lsts = (reg >> 3) & 0x0F; |
| |
| switch (lsts) { |
| case USB_LINK_NOT_CONFIGURED: |
| case USB_LINK_RESERVED: |
| case USB_LINK_NOT_VALID_LINK: |
| /* TODO: Disable regulators. */ |
| ab8500_usb_host_phy_dis(ab); |
| ab8500_usb_peri_phy_dis(ab); |
| ab->otg.state = OTG_STATE_B_IDLE; |
| ab->otg.default_a = false; |
| ab->vbus_draw = 0; |
| event = USB_EVENT_NONE; |
| break; |
| |
| case USB_LINK_STD_HOST_NC: |
| case USB_LINK_STD_HOST_C_NS: |
| case USB_LINK_STD_HOST_C_S: |
| case USB_LINK_HOST_CHG_NM: |
| case USB_LINK_HOST_CHG_HS: |
| case USB_LINK_HOST_CHG_HS_CHIRP: |
| if (ab->otg.gadget) { |
| /* TODO: Enable regulators. */ |
| ab8500_usb_peri_phy_en(ab); |
| v = ab->otg.gadget; |
| } |
| event = USB_EVENT_VBUS; |
| break; |
| |
| case USB_LINK_HM_IDGND: |
| if (ab->otg.host) { |
| /* TODO: Enable regulators. */ |
| ab8500_usb_host_phy_en(ab); |
| v = ab->otg.host; |
| } |
| ab->otg.state = OTG_STATE_A_IDLE; |
| ab->otg.default_a = true; |
| event = USB_EVENT_ID; |
| break; |
| |
| case USB_LINK_ACA_RID_A: |
| case USB_LINK_ACA_RID_B: |
| /* TODO */ |
| case USB_LINK_ACA_RID_C_NM: |
| case USB_LINK_ACA_RID_C_HS: |
| case USB_LINK_ACA_RID_C_HS_CHIRP: |
| case USB_LINK_DEDICATED_CHG: |
| /* TODO: vbus_draw */ |
| event = USB_EVENT_CHARGER; |
| break; |
| } |
| |
| atomic_notifier_call_chain(&ab->otg.notifier, event, v); |
| |
| return 0; |
| } |
| |
| static void ab8500_usb_delayed_work(struct work_struct *work) |
| { |
| struct ab8500_usb *ab = container_of(work, struct ab8500_usb, |
| dwork.work); |
| |
| ab8500_usb_link_status_update(ab); |
| } |
| |
| static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) |
| { |
| struct ab8500_usb *ab = (struct ab8500_usb *) data; |
| |
| /* Wait for link status to become stable. */ |
| schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) |
| { |
| struct ab8500_usb *ab = (struct ab8500_usb *) data; |
| |
| /* Link status will not be updated till phy is disabled. */ |
| ab8500_usb_peri_phy_dis(ab); |
| |
| /* Wait for link status to become stable. */ |
| schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) |
| { |
| struct ab8500_usb *ab = (struct ab8500_usb *) data; |
| |
| ab8500_usb_link_status_update(ab); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void ab8500_usb_phy_disable_work(struct work_struct *work) |
| { |
| struct ab8500_usb *ab = container_of(work, struct ab8500_usb, |
| phy_dis_work); |
| |
| if (!ab->otg.host) |
| ab8500_usb_host_phy_dis(ab); |
| |
| if (!ab->otg.gadget) |
| ab8500_usb_peri_phy_dis(ab); |
| } |
| |
| static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA) |
| { |
| struct ab8500_usb *ab; |
| |
| if (!otg) |
| return -ENODEV; |
| |
| ab = xceiv_to_ab(otg); |
| |
| ab->vbus_draw = mA; |
| |
| if (mA) |
| atomic_notifier_call_chain(&ab->otg.notifier, |
| USB_EVENT_ENUMERATED, ab->otg.gadget); |
| return 0; |
| } |
| |
| /* TODO: Implement some way for charging or other drivers to read |
| * ab->vbus_draw. |
| */ |
| |
| static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend) |
| { |
| /* TODO */ |
| return 0; |
| } |
| |
| static int ab8500_usb_set_peripheral(struct otg_transceiver *otg, |
| struct usb_gadget *gadget) |
| { |
| struct ab8500_usb *ab; |
| |
| if (!otg) |
| return -ENODEV; |
| |
| ab = xceiv_to_ab(otg); |
| |
| /* Some drivers call this function in atomic context. |
| * Do not update ab8500 registers directly till this |
| * is fixed. |
| */ |
| |
| if (!gadget) { |
| /* TODO: Disable regulators. */ |
| ab->otg.gadget = NULL; |
| schedule_work(&ab->phy_dis_work); |
| } else { |
| ab->otg.gadget = gadget; |
| ab->otg.state = OTG_STATE_B_IDLE; |
| |
| /* Phy will not be enabled if cable is already |
| * plugged-in. Schedule to enable phy. |
| * Use same delay to avoid any race condition. |
| */ |
| schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| } |
| |
| return 0; |
| } |
| |
| static int ab8500_usb_set_host(struct otg_transceiver *otg, |
| struct usb_bus *host) |
| { |
| struct ab8500_usb *ab; |
| |
| if (!otg) |
| return -ENODEV; |
| |
| ab = xceiv_to_ab(otg); |
| |
| /* Some drivers call this function in atomic context. |
| * Do not update ab8500 registers directly till this |
| * is fixed. |
| */ |
| |
| if (!host) { |
| /* TODO: Disable regulators. */ |
| ab->otg.host = NULL; |
| schedule_work(&ab->phy_dis_work); |
| } else { |
| ab->otg.host = host; |
| /* Phy will not be enabled if cable is already |
| * plugged-in. Schedule to enable phy. |
| * Use same delay to avoid any race condition. |
| */ |
| schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| } |
| |
| return 0; |
| } |
| |
| static void ab8500_usb_irq_free(struct ab8500_usb *ab) |
| { |
| if (ab->rev < 0x20) { |
| free_irq(ab->irq_num_id_rise, ab); |
| free_irq(ab->irq_num_id_fall, ab); |
| free_irq(ab->irq_num_vbus_rise, ab); |
| free_irq(ab->irq_num_vbus_fall, ab); |
| } else { |
| free_irq(ab->irq_num_link_status, ab); |
| } |
| } |
| |
| static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, |
| struct ab8500_usb *ab) |
| { |
| int err; |
| |
| ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); |
| if (ab->irq_num_id_rise < 0) { |
| dev_err(&pdev->dev, "ID rise irq not found\n"); |
| return ab->irq_num_id_rise; |
| } |
| err = request_threaded_irq(ab->irq_num_id_rise, NULL, |
| ab8500_usb_v1x_common_irq, |
| IRQF_NO_SUSPEND | IRQF_SHARED, |
| "usb-id-rise", ab); |
| if (err < 0) { |
| dev_err(ab->dev, "request_irq failed for ID rise irq\n"); |
| goto fail0; |
| } |
| |
| ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); |
| if (ab->irq_num_id_fall < 0) { |
| dev_err(&pdev->dev, "ID fall irq not found\n"); |
| return ab->irq_num_id_fall; |
| } |
| err = request_threaded_irq(ab->irq_num_id_fall, NULL, |
| ab8500_usb_v1x_common_irq, |
| IRQF_NO_SUSPEND | IRQF_SHARED, |
| "usb-id-fall", ab); |
| if (err < 0) { |
| dev_err(ab->dev, "request_irq failed for ID fall irq\n"); |
| goto fail1; |
| } |
| |
| ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); |
| if (ab->irq_num_vbus_rise < 0) { |
| dev_err(&pdev->dev, "VBUS rise irq not found\n"); |
| return ab->irq_num_vbus_rise; |
| } |
| err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, |
| ab8500_usb_v1x_common_irq, |
| IRQF_NO_SUSPEND | IRQF_SHARED, |
| "usb-vbus-rise", ab); |
| if (err < 0) { |
| dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); |
| goto fail2; |
| } |
| |
| ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); |
| if (ab->irq_num_vbus_fall < 0) { |
| dev_err(&pdev->dev, "VBUS fall irq not found\n"); |
| return ab->irq_num_vbus_fall; |
| } |
| err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, |
| ab8500_usb_v1x_vbus_fall_irq, |
| IRQF_NO_SUSPEND | IRQF_SHARED, |
| "usb-vbus-fall", ab); |
| if (err < 0) { |
| dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); |
| goto fail3; |
| } |
| |
| return 0; |
| fail3: |
| free_irq(ab->irq_num_vbus_rise, ab); |
| fail2: |
| free_irq(ab->irq_num_id_fall, ab); |
| fail1: |
| free_irq(ab->irq_num_id_rise, ab); |
| fail0: |
| return err; |
| } |
| |
| static int ab8500_usb_v2_res_setup(struct platform_device *pdev, |
| struct ab8500_usb *ab) |
| { |
| int err; |
| |
| ab->irq_num_link_status = platform_get_irq_byname(pdev, |
| "USB_LINK_STATUS"); |
| if (ab->irq_num_link_status < 0) { |
| dev_err(&pdev->dev, "Link status irq not found\n"); |
| return ab->irq_num_link_status; |
| } |
| |
| err = request_threaded_irq(ab->irq_num_link_status, NULL, |
| ab8500_usb_v20_irq, |
| IRQF_NO_SUSPEND | IRQF_SHARED, |
| "usb-link-status", ab); |
| if (err < 0) { |
| dev_err(ab->dev, |
| "request_irq failed for link status irq\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int __devinit ab8500_usb_probe(struct platform_device *pdev) |
| { |
| struct ab8500_usb *ab; |
| int err; |
| int rev; |
| |
| rev = abx500_get_chip_id(&pdev->dev); |
| if (rev < 0) { |
| dev_err(&pdev->dev, "Chip id read failed\n"); |
| return rev; |
| } else if (rev < 0x10) { |
| dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); |
| return -ENODEV; |
| } |
| |
| ab = kzalloc(sizeof *ab, GFP_KERNEL); |
| if (!ab) |
| return -ENOMEM; |
| |
| ab->dev = &pdev->dev; |
| ab->rev = rev; |
| ab->otg.dev = ab->dev; |
| ab->otg.label = "ab8500"; |
| ab->otg.state = OTG_STATE_UNDEFINED; |
| ab->otg.set_host = ab8500_usb_set_host; |
| ab->otg.set_peripheral = ab8500_usb_set_peripheral; |
| ab->otg.set_suspend = ab8500_usb_set_suspend; |
| ab->otg.set_power = ab8500_usb_set_power; |
| |
| platform_set_drvdata(pdev, ab); |
| |
| ATOMIC_INIT_NOTIFIER_HEAD(&ab->otg.notifier); |
| |
| /* v1: Wait for link status to become stable. |
| * all: Updates form set_host and set_peripheral as they are atomic. |
| */ |
| INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); |
| |
| /* all: Disable phy when called from set_host and set_peripheral */ |
| INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); |
| |
| if (ab->rev < 0x20) { |
| err = ab8500_usb_v1x_res_setup(pdev, ab); |
| ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; |
| } else { |
| err = ab8500_usb_v2_res_setup(pdev, ab); |
| } |
| |
| if (err < 0) |
| goto fail0; |
| |
| err = otg_set_transceiver(&ab->otg); |
| if (err) { |
| dev_err(&pdev->dev, "Can't register transceiver\n"); |
| goto fail1; |
| } |
| |
| dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); |
| |
| return 0; |
| fail1: |
| ab8500_usb_irq_free(ab); |
| fail0: |
| kfree(ab); |
| return err; |
| } |
| |
| static int __devexit ab8500_usb_remove(struct platform_device *pdev) |
| { |
| struct ab8500_usb *ab = platform_get_drvdata(pdev); |
| |
| ab8500_usb_irq_free(ab); |
| |
| cancel_delayed_work_sync(&ab->dwork); |
| |
| cancel_work_sync(&ab->phy_dis_work); |
| |
| otg_set_transceiver(NULL); |
| |
| ab8500_usb_host_phy_dis(ab); |
| ab8500_usb_peri_phy_dis(ab); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| kfree(ab); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ab8500_usb_driver = { |
| .probe = ab8500_usb_probe, |
| .remove = __devexit_p(ab8500_usb_remove), |
| .driver = { |
| .name = "ab8500-usb", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init ab8500_usb_init(void) |
| { |
| return platform_driver_register(&ab8500_usb_driver); |
| } |
| subsys_initcall(ab8500_usb_init); |
| |
| static void __exit ab8500_usb_exit(void) |
| { |
| platform_driver_unregister(&ab8500_usb_driver); |
| } |
| module_exit(ab8500_usb_exit); |
| |
| MODULE_ALIAS("platform:ab8500_usb"); |
| MODULE_AUTHOR("ST-Ericsson AB"); |
| MODULE_DESCRIPTION("AB8500 usb transceiver driver"); |
| MODULE_LICENSE("GPL"); |