arch/x86/pci/acpi.c - kernel/msm-4.9 - Gitiles

 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <asm/numa.h>
 #include <asm/pci_x86.h>

 struct pci_root_info {
 	struct acpi_device *bridge;
 	char name[16];
 	struct pci_sysdata sd;
 #ifdef	CONFIG_PCI_MMCONFIG
 	bool mcfg_added;
 	u16 segment;
 	u8 start_bus;
 	u8 end_bus;
 #endif
 };

 static bool pci_use_crs = true;
 static bool pci_ignore_seg = false;

 static int __init set_use_crs(const struct dmi_system_id *id)
 {
 	pci_use_crs = true;
 	return 0;
 }

 static int __init set_nouse_crs(const struct dmi_system_id *id)
 {
 	pci_use_crs = false;
 	return 0;
 }

 static int __init set_ignore_seg(const struct dmi_system_id *id)
 {
 	printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
 	pci_ignore_seg = true;
 	return 0;
 }

 static const struct dmi_system_id pci_crs_quirks[] __initconst = {
 	/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
 	{
 		.callback = set_use_crs,
 		.ident = "IBM System x3800",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
 		},
 	},
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
 	/* 2006 AMD HT/VIA system with two host bridges */
         {
 		.callback = set_use_crs,
 		.ident = "ASRock ALiveSATA2-GLAN",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
                 },
         },
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
 	/* 2006 AMD HT/VIA system with two host bridges */
 	{
 		.callback = set_use_crs,
 		.ident = "ASUS M2V-MX SE",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 			DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
 		},
 	},
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
 	{
 		.callback = set_use_crs,
 		.ident = "MSI MS-7253",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
 			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
 		},
 	},

 	/* Now for the blacklist.. */

 	/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
 	{
 		.callback = set_nouse_crs,
 		.ident = "Dell Studio 1557",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
 			DMI_MATCH(DMI_BIOS_VERSION, "A09"),
 		},
 	},
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
 	{
 		.callback = set_nouse_crs,
 		.ident = "Thinkpad SL510",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "2847DFG"),
 			DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
 		},
 	},

 	/* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
 	{
 		.callback = set_ignore_seg,
 		.ident = "HP xw9300",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
 		},
 	},
 	{}
 };

 void __init pci_acpi_crs_quirks(void)
 {
 	int year;

 	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
 		pci_use_crs = false;

 	dmi_check_system(pci_crs_quirks);

 	/*
 	 * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
 	 * takes precedence over anything we figured out above.
 	 */
 	if (pci_probe & PCI_ROOT_NO_CRS)
 		pci_use_crs = false;
 	else if (pci_probe & PCI_USE__CRS)
 		pci_use_crs = true;

 	printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
 	       "if necessary, use \"pci=%s\" and report a bug\n",
 	       pci_use_crs ? "Using" : "Ignoring",
 	       pci_use_crs ? "nocrs" : "use_crs");
 }

 #ifdef	CONFIG_PCI_MMCONFIG
 static int check_segment(u16 seg, struct device *dev, char *estr)
 {
 	if (seg) {
 		dev_err(dev,
 			"%s can't access PCI configuration "
 			"space under this host bridge.\n",
 			estr);
 		return -EIO;
 	}

 	/*
 	 * Failure in adding MMCFG information is not fatal,
 	 * just can't access extended configuration space of
 	 * devices under this host bridge.
 	 */
 	dev_warn(dev,
 		 "%s can't access extended PCI configuration "
 		 "space under this bridge.\n",
 		 estr);

 	return 0;
 }

 static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
 			  u8 end, phys_addr_t addr)
 {
 	int result;
 	struct device *dev = &info->bridge->dev;

 	info->start_bus = start;
 	info->end_bus = end;
 	info->mcfg_added = false;

 	/* return success if MMCFG is not in use */
 	if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
 		return 0;

 	if (!(pci_probe & PCI_PROBE_MMCONF))
 		return check_segment(seg, dev, "MMCONFIG is disabled,");

 	result = pci_mmconfig_insert(dev, seg, start, end, addr);
 	if (result == 0) {
 		/* enable MMCFG if it hasn't been enabled yet */
 		if (raw_pci_ext_ops == NULL)
 			raw_pci_ext_ops = &pci_mmcfg;
 		info->mcfg_added = true;
 	} else if (result != -EEXIST)
 		return check_segment(seg, dev,
 			 "fail to add MMCONFIG information,");

 	return 0;
 }

 static void teardown_mcfg_map(struct pci_root_info *info)
 {
 	if (info->mcfg_added) {
 		pci_mmconfig_delete(info->segment, info->start_bus,
 				    info->end_bus);
 		info->mcfg_added = false;
 	}
 }
 #else
 static int setup_mcfg_map(struct pci_root_info *info,
 				    u16 seg, u8 start, u8 end,
 				    phys_addr_t addr)
 {
 	return 0;
 }
 static void teardown_mcfg_map(struct pci_root_info *info)
 {
 }
 #endif

 static void validate_resources(struct device *dev, struct list_head *crs_res,
 			       unsigned long type)
 {
 	LIST_HEAD(list);
 	struct resource *res1, *res2, *root = NULL;
 	struct resource_entry *tmp, *entry, *entry2;

 	BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
 	root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;

 	list_splice_init(crs_res, &list);
 	resource_list_for_each_entry_safe(entry, tmp, &list) {
 		bool free = false;
 		resource_size_t end;

 		res1 = entry->res;
 		if (!(res1->flags & type))
 			goto next;

 		/* Exclude non-addressable range or non-addressable portion */
 		end = min(res1->end, root->end);
 		if (end <= res1->start) {
 			dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
 				 res1);
 			free = true;
 			goto next;
 		} else if (res1->end != end) {
 			dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
 				 res1, (unsigned long long)end + 1,
 				 (unsigned long long)res1->end);
 			res1->end = end;
 		}

 		resource_list_for_each_entry(entry2, crs_res) {
 			res2 = entry2->res;
 			if (!(res2->flags & type))
 				continue;

 			/*
 			 * I don't like throwing away windows because then
 			 * our resources no longer match the ACPI _CRS, but
 			 * the kernel resource tree doesn't allow overlaps.
 			 */
 			if (resource_overlaps(res1, res2)) {
 				res2->start = min(res1->start, res2->start);
 				res2->end = max(res1->end, res2->end);
 				dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
 					 res2, res1);
 				free = true;
 				goto next;
 			}
 		}

 next:
 		resource_list_del(entry);
 		if (free)
 			resource_list_free_entry(entry);
 		else
 			resource_list_add_tail(entry, crs_res);
 	}
 }

 static void add_resources(struct pci_root_info *info,
 			  struct list_head *resources,
 			  struct list_head *crs_res)
 {
 	struct resource_entry *entry, *tmp;
 	struct resource *res, *conflict, *root = NULL;

 	validate_resources(&info->bridge->dev, crs_res, IORESOURCE_MEM);
 	validate_resources(&info->bridge->dev, crs_res, IORESOURCE_IO);

 	resource_list_for_each_entry_safe(entry, tmp, crs_res) {
 		res = entry->res;
 		if (res->flags & IORESOURCE_MEM)
 			root = &iomem_resource;
 		else if (res->flags & IORESOURCE_IO)
 			root = &ioport_resource;
 		else
 			BUG_ON(res);

 		conflict = insert_resource_conflict(root, res);
 		if (conflict) {
 			dev_info(&info->bridge->dev,
 				 "ignoring host bridge window %pR (conflicts with %s %pR)\n",
 				 res, conflict->name, conflict);
 			resource_list_destroy_entry(entry);
 		}
 	}

 	list_splice_tail(crs_res, resources);
 }

 static void release_pci_root_info(struct pci_host_bridge *bridge)
 {
 	struct resource *res;
 	struct resource_entry *entry;
 	struct pci_root_info *info = bridge->release_data;

 	resource_list_for_each_entry(entry, &bridge->windows) {
 		res = entry->res;
 		if (res->parent &&
 		    (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
 			release_resource(res);
 	}

 	teardown_mcfg_map(info);
 	kfree(info);
 }

 /*
  * An IO port or MMIO resource assigned to a PCI host bridge may be
  * consumed by the host bridge itself or available to its child
  * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
  * to tell whether the resource is consumed by the host bridge itself,
  * but firmware hasn't used that bit consistently, so we can't rely on it.
  *
  * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
  * to be available to child bus/devices except one special case:
  *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
  *     to access PCI configuration space.
  *
  * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
  */
 static bool resource_is_pcicfg_ioport(struct resource *res)
 {
 	return (res->flags & IORESOURCE_IO) &&
 		res->start == 0xCF8 && res->end == 0xCFF;
 }

 static void probe_pci_root_info(struct pci_root_info *info,
 				struct acpi_device *device,
 				int busnum, int domain,
 				struct list_head *list)
 {
 	int ret;
 	struct resource_entry *entry, *tmp;

 	sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
 	info->bridge = device;
 	ret = acpi_dev_get_resources(device, list,
 				     acpi_dev_filter_resource_type_cb,
 				     (void *)(IORESOURCE_IO | IORESOURCE_MEM));
 	if (ret < 0)
 		dev_warn(&device->dev,
 			 "failed to parse _CRS method, error code %d\n", ret);
 	else if (ret == 0)
 		dev_dbg(&device->dev,
 			"no IO and memory resources present in _CRS\n");
 	else
 		resource_list_for_each_entry_safe(entry, tmp, list) {
 			if ((entry->res->flags & IORESOURCE_DISABLED) ||
 			    resource_is_pcicfg_ioport(entry->res))
 				resource_list_destroy_entry(entry);
 			else
 				entry->res->name = info->name;
 		}
 }

 struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 {
 	struct acpi_device *device = root->device;
 	struct pci_root_info *info;
 	int domain = root->segment;
 	int busnum = root->secondary.start;
 	struct resource_entry *res_entry;
 	LIST_HEAD(crs_res);
 	LIST_HEAD(resources);
 	struct pci_bus *bus;
 	struct pci_sysdata *sd;
 	int node;

 	if (pci_ignore_seg)
 		domain = 0;

 	if (domain && !pci_domains_supported) {
 		printk(KERN_WARNING "pci_bus %04x:%02x: "
 		       "ignored (multiple domains not supported)\n",
 		       domain, busnum);
 		return NULL;
 	}

 	node = acpi_get_node(device->handle);
 	if (node == NUMA_NO_NODE) {
 		node = x86_pci_root_bus_node(busnum);
 		if (node != 0 && node != NUMA_NO_NODE)
 			dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
 				node);
 	}

 	if (node != NUMA_NO_NODE && !node_online(node))
 		node = NUMA_NO_NODE;

 	info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
 	if (!info) {
 		printk(KERN_WARNING "pci_bus %04x:%02x: "
 		       "ignored (out of memory)\n", domain, busnum);
 		return NULL;
 	}

 	sd = &info->sd;
 	sd->domain = domain;
 	sd->node = node;
 	sd->companion = device;

 	bus = pci_find_bus(domain, busnum);
 	if (bus) {
 		/*
 		 * If the desired bus has been scanned already, replace
 		 * its bus->sysdata.
 		 */
 		memcpy(bus->sysdata, sd, sizeof(*sd));
 		kfree(info);
 	} else {
 		/* insert busn res at first */
 		pci_add_resource(&resources,  &root->secondary);

 		/*
 		 * _CRS with no apertures is normal, so only fall back to
 		 * defaults or native bridge info if we're ignoring _CRS.
 		 */
 		probe_pci_root_info(info, device, busnum, domain, &crs_res);
 		if (pci_use_crs) {
 			add_resources(info, &resources, &crs_res);
 		} else {
 			resource_list_for_each_entry(res_entry, &crs_res)
 				dev_printk(KERN_DEBUG, &device->dev,
 					   "host bridge window %pR (ignored)\n",
 					   res_entry->res);
 			resource_list_free(&crs_res);
 			x86_pci_root_bus_resources(busnum, &resources);
 		}

 		if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
 				    (u8)root->secondary.end, root->mcfg_addr))
 			bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
 						  sd, &resources);

 		if (bus) {
 			pci_scan_child_bus(bus);
 			pci_set_host_bridge_release(
 				to_pci_host_bridge(bus->bridge),
 				release_pci_root_info, info);
 		} else {
 			resource_list_free(&resources);
 			teardown_mcfg_map(info);
 			kfree(info);
 		}
 	}

 	/* After the PCI-E bus has been walked and all devices discovered,
 	 * configure any settings of the fabric that might be necessary.
 	 */
 	if (bus) {
 		struct pci_bus *child;
 		list_for_each_entry(child, &bus->children, node)
 			pcie_bus_configure_settings(child);
 	}

 	if (bus && node != NUMA_NO_NODE)
 		dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);

 	return bus;
 }

 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
 	struct pci_sysdata *sd = bridge->bus->sysdata;

 	ACPI_COMPANION_SET(&bridge->dev, sd->companion);
 	return 0;
 }

 int __init pci_acpi_init(void)
 {
 	struct pci_dev *dev = NULL;

 	if (acpi_noirq)
 		return -ENODEV;

 	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
 	acpi_irq_penalty_init();
 	pcibios_enable_irq = acpi_pci_irq_enable;
 	pcibios_disable_irq = acpi_pci_irq_disable;
 	x86_init.pci.init_irq = x86_init_noop;

 	if (pci_routeirq) {
 		/*
 		 * PCI IRQ routing is set up by pci_enable_device(), but we
 		 * also do it here in case there are still broken drivers that
 		 * don't use pci_enable_device().
 		 */
 		printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
 		for_each_pci_dev(dev)
 			acpi_pci_irq_enable(dev);
 	}

 	return 0;
 }
	#include <linux/pci.h>
	#include <linux/acpi.h>
	#include <linux/init.h>
	#include <linux/irq.h>
	#include <linux/dmi.h>
	#include <linux/slab.h>
	#include <asm/numa.h>
	#include <asm/pci_x86.h>

	struct pci_root_info {
	struct acpi_device *bridge;
	char name[16];
	struct pci_sysdata sd;
	#ifdef CONFIG_PCI_MMCONFIG
	bool mcfg_added;
	u16 segment;
	u8 start_bus;
	u8 end_bus;
	#endif
	};

	static bool pci_use_crs = true;
	static bool pci_ignore_seg = false;

	static int __init set_use_crs(const struct dmi_system_id *id)
	{
	pci_use_crs = true;
	return 0;
	}

	static int __init set_nouse_crs(const struct dmi_system_id *id)
	{
	pci_use_crs = false;
	return 0;
	}

	static int __init set_ignore_seg(const struct dmi_system_id *id)
	{
	printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
	pci_ignore_seg = true;
	return 0;
	}

	static const struct dmi_system_id pci_crs_quirks[] __initconst = {
	/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
	{
	.callback = set_use_crs,
	.ident = "IBM System x3800",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
	DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
	},
	},
	/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
	/* 2006 AMD HT/VIA system with two host bridges */
	{
	.callback = set_use_crs,
	.ident = "ASRock ALiveSATA2-GLAN",
	.matches = {
	DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
	},
	},
	/* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
	/* 2006 AMD HT/VIA system with two host bridges */
	{
	.callback = set_use_crs,
	.ident = "ASUS M2V-MX SE",
	.matches = {
	DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
	DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
	DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
	},
	},
	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
	{
	.callback = set_use_crs,
	.ident = "MSI MS-7253",
	.matches = {
	DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
	DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
	},
	},

	/* Now for the blacklist.. */

	/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
	{
	.callback = set_nouse_crs,
	.ident = "Dell Studio 1557",
	.matches = {
	DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."),
	DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
	DMI_MATCH(DMI_BIOS_VERSION, "A09"),
	},
	},
	/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
	{
	.callback = set_nouse_crs,
	.ident = "Thinkpad SL510",
	.matches = {
	DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
	DMI_MATCH(DMI_BOARD_NAME, "2847DFG"),
	DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
	},
	},

	/* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
	{
	.callback = set_ignore_seg,
	.ident = "HP xw9300",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
	DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
	},
	},
	{}
	};

	void __init pci_acpi_crs_quirks(void)
	{
	int year;

	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
	pci_use_crs = false;

	dmi_check_system(pci_crs_quirks);

	/*
	* If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
	* takes precedence over anything we figured out above.
	*/
	if (pci_probe & PCI_ROOT_NO_CRS)
	pci_use_crs = false;
	else if (pci_probe & PCI_USE__CRS)
	pci_use_crs = true;

	printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
	"if necessary, use \"pci=%s\" and report a bug\n",
	pci_use_crs ? "Using" : "Ignoring",
	pci_use_crs ? "nocrs" : "use_crs");
	}

	#ifdef CONFIG_PCI_MMCONFIG
	static int check_segment(u16 seg, struct device dev, char estr)
	{
	if (seg) {
	dev_err(dev,
	"%s can't access PCI configuration "
	"space under this host bridge.\n",
	estr);
	return -EIO;
	}

	/*
	* Failure in adding MMCFG information is not fatal,
	* just can't access extended configuration space of
	* devices under this host bridge.
	*/
	dev_warn(dev,
	"%s can't access extended PCI configuration "
	"space under this bridge.\n",
	estr);

	return 0;
	}

	static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
	u8 end, phys_addr_t addr)
	{
	int result;
	struct device *dev = &info->bridge->dev;

	info->start_bus = start;
	info->end_bus = end;
	info->mcfg_added = false;

	/* return success if MMCFG is not in use */
	if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
	return 0;

	if (!(pci_probe & PCI_PROBE_MMCONF))
	return check_segment(seg, dev, "MMCONFIG is disabled,");

	result = pci_mmconfig_insert(dev, seg, start, end, addr);
	if (result == 0) {
	/* enable MMCFG if it hasn't been enabled yet */
	if (raw_pci_ext_ops == NULL)
	raw_pci_ext_ops = &pci_mmcfg;
	info->mcfg_added = true;
	} else if (result != -EEXIST)
	return check_segment(seg, dev,
	"fail to add MMCONFIG information,");

	return 0;
	}

	static void teardown_mcfg_map(struct pci_root_info *info)
	{
	if (info->mcfg_added) {
	pci_mmconfig_delete(info->segment, info->start_bus,
	info->end_bus);
	info->mcfg_added = false;
	}
	}
	#else
	static int setup_mcfg_map(struct pci_root_info *info,
	u16 seg, u8 start, u8 end,
	phys_addr_t addr)
	{
	return 0;
	}
	static void teardown_mcfg_map(struct pci_root_info *info)
	{
	}
	#endif

	static void validate_resources(struct device dev, struct list_head crs_res,
	unsigned long type)
	{
	LIST_HEAD(list);
	struct resource res1, res2, *root = NULL;
	struct resource_entry tmp, entry, *entry2;

	BUG_ON((type & (IORESOURCE_MEM \| IORESOURCE_IO)) == 0);
	root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;

	list_splice_init(crs_res, &list);
	resource_list_for_each_entry_safe(entry, tmp, &list) {
	bool free = false;
	resource_size_t end;

	res1 = entry->res;
	if (!(res1->flags & type))
	goto next;

	/* Exclude non-addressable range or non-addressable portion */
	end = min(res1->end, root->end);
	if (end <= res1->start) {
	dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
	res1);
	free = true;
	goto next;
	} else if (res1->end != end) {
	dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
	res1, (unsigned long long)end + 1,
	(unsigned long long)res1->end);
	res1->end = end;
	}

	resource_list_for_each_entry(entry2, crs_res) {
	res2 = entry2->res;
	if (!(res2->flags & type))
	continue;

	/*
	* I don't like throwing away windows because then
	* our resources no longer match the ACPI _CRS, but
	* the kernel resource tree doesn't allow overlaps.
	*/
	if (resource_overlaps(res1, res2)) {
	res2->start = min(res1->start, res2->start);
	res2->end = max(res1->end, res2->end);
	dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
	res2, res1);
	free = true;
	goto next;
	}
	}

	next:
	resource_list_del(entry);
	if (free)
	resource_list_free_entry(entry);
	else
	resource_list_add_tail(entry, crs_res);
	}
	}

	static void add_resources(struct pci_root_info *info,
	struct list_head *resources,
	struct list_head *crs_res)
	{
	struct resource_entry entry, tmp;
	struct resource res, conflict, *root = NULL;

	validate_resources(&info->bridge->dev, crs_res, IORESOURCE_MEM);
	validate_resources(&info->bridge->dev, crs_res, IORESOURCE_IO);

	resource_list_for_each_entry_safe(entry, tmp, crs_res) {
	res = entry->res;
	if (res->flags & IORESOURCE_MEM)
	root = &iomem_resource;
	else if (res->flags & IORESOURCE_IO)
	root = &ioport_resource;
	else
	BUG_ON(res);

	conflict = insert_resource_conflict(root, res);
	if (conflict) {
	dev_info(&info->bridge->dev,
	"ignoring host bridge window %pR (conflicts with %s %pR)\n",
	res, conflict->name, conflict);
	resource_list_destroy_entry(entry);
	}
	}

	list_splice_tail(crs_res, resources);
	}

	static void release_pci_root_info(struct pci_host_bridge *bridge)
	{
	struct resource *res;
	struct resource_entry *entry;
	struct pci_root_info *info = bridge->release_data;

	resource_list_for_each_entry(entry, &bridge->windows) {
	res = entry->res;
	if (res->parent &&
	(res->flags & (IORESOURCE_MEM \| IORESOURCE_IO)))
	release_resource(res);
	}

	teardown_mcfg_map(info);
	kfree(info);
	}

	/*
	* An IO port or MMIO resource assigned to a PCI host bridge may be
	* consumed by the host bridge itself or available to its child
	* bus/devices. The ACPI specification defines a bit (Producer/Consumer)
	* to tell whether the resource is consumed by the host bridge itself,
	* but firmware hasn't used that bit consistently, so we can't rely on it.
	*
	* On x86 and IA64 platforms, all IO port and MMIO resources are assumed
	* to be available to child bus/devices except one special case:
	* IO port [0xCF8-0xCFF] is consumed by the host bridge itself
	* to access PCI configuration space.
	*
	* So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
	*/
	static bool resource_is_pcicfg_ioport(struct resource *res)
	{
	return (res->flags & IORESOURCE_IO) &&
	res->start == 0xCF8 && res->end == 0xCFF;
	}

	static void probe_pci_root_info(struct pci_root_info *info,
	struct acpi_device *device,
	int busnum, int domain,
	struct list_head *list)
	{
	int ret;
	struct resource_entry entry, tmp;

	sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
	info->bridge = device;
	ret = acpi_dev_get_resources(device, list,
	acpi_dev_filter_resource_type_cb,
	(void *)(IORESOURCE_IO \| IORESOURCE_MEM));
	if (ret < 0)
	dev_warn(&device->dev,
	"failed to parse _CRS method, error code %d\n", ret);
	else if (ret == 0)
	dev_dbg(&device->dev,
	"no IO and memory resources present in _CRS\n");
	else
	resource_list_for_each_entry_safe(entry, tmp, list) {
	if ((entry->res->flags & IORESOURCE_DISABLED) \|\|
	resource_is_pcicfg_ioport(entry->res))
	resource_list_destroy_entry(entry);
	else
	entry->res->name = info->name;
	}
	}

	struct pci_bus pci_acpi_scan_root(struct acpi_pci_root root)
	{
	struct acpi_device *device = root->device;
	struct pci_root_info *info;
	int domain = root->segment;
	int busnum = root->secondary.start;
	struct resource_entry *res_entry;
	LIST_HEAD(crs_res);
	LIST_HEAD(resources);
	struct pci_bus *bus;
	struct pci_sysdata *sd;
	int node;

	if (pci_ignore_seg)
	domain = 0;

	if (domain && !pci_domains_supported) {
	printk(KERN_WARNING "pci_bus %04x:%02x: "
	"ignored (multiple domains not supported)\n",
	domain, busnum);
	return NULL;
	}

	node = acpi_get_node(device->handle);
	if (node == NUMA_NO_NODE) {
	node = x86_pci_root_bus_node(busnum);
	if (node != 0 && node != NUMA_NO_NODE)
	dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
	node);
	}

	if (node != NUMA_NO_NODE && !node_online(node))
	node = NUMA_NO_NODE;

	info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
	if (!info) {
	printk(KERN_WARNING "pci_bus %04x:%02x: "
	"ignored (out of memory)\n", domain, busnum);
	return NULL;
	}

	sd = &info->sd;
	sd->domain = domain;
	sd->node = node;
	sd->companion = device;

	bus = pci_find_bus(domain, busnum);
	if (bus) {
	/*
	* If the desired bus has been scanned already, replace
	* its bus->sysdata.
	*/
	memcpy(bus->sysdata, sd, sizeof(*sd));
	kfree(info);
	} else {
	/* insert busn res at first */
	pci_add_resource(&resources, &root->secondary);

	/*
	* _CRS with no apertures is normal, so only fall back to
	* defaults or native bridge info if we're ignoring _CRS.
	*/
	probe_pci_root_info(info, device, busnum, domain, &crs_res);
	if (pci_use_crs) {
	add_resources(info, &resources, &crs_res);
	} else {
	resource_list_for_each_entry(res_entry, &crs_res)
	dev_printk(KERN_DEBUG, &device->dev,
	"host bridge window %pR (ignored)\n",
	res_entry->res);
	resource_list_free(&crs_res);
	x86_pci_root_bus_resources(busnum, &resources);
	}

	if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
	(u8)root->secondary.end, root->mcfg_addr))
	bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
	sd, &resources);

	if (bus) {
	pci_scan_child_bus(bus);
	pci_set_host_bridge_release(
	to_pci_host_bridge(bus->bridge),
	release_pci_root_info, info);
	} else {
	resource_list_free(&resources);
	teardown_mcfg_map(info);
	kfree(info);
	}
	}

	/* After the PCI-E bus has been walked and all devices discovered,
	* configure any settings of the fabric that might be necessary.
	*/
	if (bus) {
	struct pci_bus *child;
	list_for_each_entry(child, &bus->children, node)
	pcie_bus_configure_settings(child);
	}

	if (bus && node != NUMA_NO_NODE)
	dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);

	return bus;
	}

	int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
	{
	struct pci_sysdata *sd = bridge->bus->sysdata;

	ACPI_COMPANION_SET(&bridge->dev, sd->companion);
	return 0;
	}

	int __init pci_acpi_init(void)
	{
	struct pci_dev *dev = NULL;

	if (acpi_noirq)
	return -ENODEV;

	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
	acpi_irq_penalty_init();
	pcibios_enable_irq = acpi_pci_irq_enable;
	pcibios_disable_irq = acpi_pci_irq_disable;
	x86_init.pci.init_irq = x86_init_noop;

	if (pci_routeirq) {
	/*
	* PCI IRQ routing is set up by pci_enable_device(), but we
	* also do it here in case there are still broken drivers that
	* don't use pci_enable_device().
	*/
	printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
	for_each_pci_dev(dev)
	acpi_pci_irq_enable(dev);
	}

	return 0;
	}