drivers/usb/host/bcma-hcd.c - kernel/msm-4.9 - Gitiles

 /*
  * Broadcom specific Advanced Microcontroller Bus
  * Broadcom USB-core driver (BCMA bus glue)
  *
  * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Based on ssb-ohci driver
  * Copyright 2007 Michael Buesch <m@bues.ch>
  *
  * Derived from the OHCI-PCI driver
  * Copyright 1999 Roman Weissgaerber
  * Copyright 2000-2002 David Brownell
  * Copyright 1999 Linus Torvalds
  * Copyright 1999 Gregory P. Smith
  *
  * Derived from the USBcore related parts of Broadcom-SB
  * Copyright 2005-2011 Broadcom Corporation
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 #include <linux/bcma/bcma.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>

 MODULE_AUTHOR("Hauke Mehrtens");
 MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
 MODULE_LICENSE("GPL");

 struct bcma_hcd_device {
 	struct platform_device *ehci_dev;
 	struct platform_device *ohci_dev;
 };

 /* Wait for bitmask in a register to get set or cleared.
  * timeout is in units of ten-microseconds.
  */
 static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
 			  int timeout)
 {
 	int i;
 	u32 val;

 	for (i = 0; i < timeout; i++) {
 		val = bcma_read32(dev, reg);
 		if ((val & bitmask) == bitmask)
 			return 0;
 		udelay(10);
 	}

 	return -ETIMEDOUT;
 }

 static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
 {
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 	/* Work around for 4716 failures. */
 	if (dev->bus->chipinfo.id == 0x4716) {
 		u32 tmp;

 		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
 		if (tmp >= 480000000)
 			tmp = 0x1846b; /* set CDR to 0x11(fast) */
 		else if (tmp == 453000000)
 			tmp = 0x1046b; /* set CDR to 0x10(slow) */
 		else
 			tmp = 0;

 		/* Change Shim mdio control reg to fix host not acking at
 		 * high frequencies
 		 */
 		if (tmp) {
 			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
 			udelay(500);

 			bcma_write32(dev, 0x524, tmp);
 			udelay(500);
 			bcma_write32(dev, 0x524, 0x4ab);
 			udelay(500);
 			bcma_read32(dev, 0x528);
 			bcma_write32(dev, 0x528, 0x80000000);
 		}
 	}
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
 }

 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
 static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
 {
 	u32 tmp;

 	/*
 	 * USB 2.0 special considerations:
 	 *
 	 * 1. Since the core supports both OHCI and EHCI functions, it must
 	 *    only be reset once.
 	 *
 	 * 2. In addition to the standard SI reset sequence, the Host Control
 	 *    Register must be programmed to bring the USB core and various
 	 *    phy components out of reset.
 	 */
 	if (!bcma_core_is_enabled(dev)) {
 		bcma_core_enable(dev, 0);
 		mdelay(10);
 		if (dev->id.rev >= 5) {
 			/* Enable Misc PLL */
 			tmp = bcma_read32(dev, 0x1e0);
 			tmp |= 0x100;
 			bcma_write32(dev, 0x1e0, tmp);
 			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
 				printk(KERN_EMERG "Failed to enable misc PPL!\n");

 			/* Take out of resets */
 			bcma_write32(dev, 0x200, 0x4ff);
 			udelay(25);
 			bcma_write32(dev, 0x200, 0x6ff);
 			udelay(25);

 			/* Make sure digital and AFE are locked in USB PHY */
 			bcma_write32(dev, 0x524, 0x6b);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);
 			udelay(50);
 			bcma_write32(dev, 0x524, 0xab);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);
 			udelay(50);
 			bcma_write32(dev, 0x524, 0x2b);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);
 			udelay(50);
 			bcma_write32(dev, 0x524, 0x10ab);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);

 			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
 				tmp = bcma_read32(dev, 0x528);
 				printk(KERN_EMERG
 				       "USB20H mdio_rddata 0x%08x\n", tmp);
 			}
 			bcma_write32(dev, 0x528, 0x80000000);
 			tmp = bcma_read32(dev, 0x314);
 			udelay(265);
 			bcma_write32(dev, 0x200, 0x7ff);
 			udelay(10);

 			/* Take USB and HSIC out of non-driving modes */
 			bcma_write32(dev, 0x510, 0);
 		} else {
 			bcma_write32(dev, 0x200, 0x7ff);

 			udelay(1);
 		}

 		bcma_hcd_4716wa(dev);
 	}
 }

 static const struct usb_ehci_pdata ehci_pdata = {
 };

 static const struct usb_ohci_pdata ohci_pdata = {
 };

 static struct platform_device * __devinit
 bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
 {
 	struct platform_device *hci_dev;
 	struct resource hci_res[2];
 	int ret = -ENOMEM;

 	memset(hci_res, 0, sizeof(hci_res));

 	hci_res[0].start = addr;
 	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
 	hci_res[0].flags = IORESOURCE_MEM;

 	hci_res[1].start = dev->irq;
 	hci_res[1].flags = IORESOURCE_IRQ;

 	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
 					"ehci-platform" , 0);
 	if (!hci_dev)
 		return NULL;

 	hci_dev->dev.parent = &dev->dev;
 	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

 	ret = platform_device_add_resources(hci_dev, hci_res,
 					    ARRAY_SIZE(hci_res));
 	if (ret)
 		goto err_alloc;
 	if (ohci)
 		ret = platform_device_add_data(hci_dev, &ohci_pdata,
 					       sizeof(ohci_pdata));
 	else
 		ret = platform_device_add_data(hci_dev, &ehci_pdata,
 					       sizeof(ehci_pdata));
 	if (ret)
 		goto err_alloc;
 	ret = platform_device_add(hci_dev);
 	if (ret)
 		goto err_alloc;

 	return hci_dev;

 err_alloc:
 	platform_device_put(hci_dev);
 	return ERR_PTR(ret);
 }

 static int __devinit bcma_hcd_probe(struct bcma_device *dev)
 {
 	int err;
 	u16 chipid_top;
 	u32 ohci_addr;
 	struct bcma_hcd_device *usb_dev;
 	struct bcma_chipinfo *chipinfo;

 	chipinfo = &dev->bus->chipinfo;
 	/* USBcores are only connected on embedded devices. */
 	chipid_top = (chipinfo->id & 0xFF00);
 	if (chipid_top != 0x4700 && chipid_top != 0x5300)
 		return -ENODEV;

 	/* TODO: Probably need checks here; is the core connected? */

 	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
 	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
 		return -EOPNOTSUPP;

 	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
 	if (!usb_dev)
 		return -ENOMEM;

 	bcma_hcd_init_chip(dev);

 	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
 	ohci_addr = dev->addr1;
 	if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
 	    && chipinfo->rev == 0)
 		ohci_addr = 0x18009000;

 	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
 	if (IS_ERR(usb_dev->ohci_dev)) {
 		err = PTR_ERR(usb_dev->ohci_dev);
 		goto err_free_usb_dev;
 	}

 	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
 	if (IS_ERR(usb_dev->ehci_dev)) {
 		err = PTR_ERR(usb_dev->ehci_dev);
 		goto err_unregister_ohci_dev;
 	}

 	bcma_set_drvdata(dev, usb_dev);
 	return 0;

 err_unregister_ohci_dev:
 	platform_device_unregister(usb_dev->ohci_dev);
 err_free_usb_dev:
 	kfree(usb_dev);
 	return err;
 }

 static void __devexit bcma_hcd_remove(struct bcma_device *dev)
 {
 	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
 	struct platform_device *ohci_dev = usb_dev->ohci_dev;
 	struct platform_device *ehci_dev = usb_dev->ehci_dev;

 	if (ohci_dev)
 		platform_device_unregister(ohci_dev);
 	if (ehci_dev)
 		platform_device_unregister(ehci_dev);

 	bcma_core_disable(dev, 0);
 }

 static void bcma_hcd_shutdown(struct bcma_device *dev)
 {
 	bcma_core_disable(dev, 0);
 }

 #ifdef CONFIG_PM

 static int bcma_hcd_suspend(struct bcma_device *dev)
 {
 	bcma_core_disable(dev, 0);

 	return 0;
 }

 static int bcma_hcd_resume(struct bcma_device *dev)
 {
 	bcma_core_enable(dev, 0);

 	return 0;
 }

 #else /* !CONFIG_PM */
 #define bcma_hcd_suspend	NULL
 #define bcma_hcd_resume	NULL
 #endif /* CONFIG_PM */

 static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
 	BCMA_CORETABLE_END
 };
 MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);

 static struct bcma_driver bcma_hcd_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= bcma_hcd_table,
 	.probe		= bcma_hcd_probe,
 	.remove		= __devexit_p(bcma_hcd_remove),
 	.shutdown	= bcma_hcd_shutdown,
 	.suspend	= bcma_hcd_suspend,
 	.resume		= bcma_hcd_resume,
 };

 static int __init bcma_hcd_init(void)
 {
 	return bcma_driver_register(&bcma_hcd_driver);
 }
 module_init(bcma_hcd_init);

 static void __exit bcma_hcd_exit(void)
 {
 	bcma_driver_unregister(&bcma_hcd_driver);
 }
 module_exit(bcma_hcd_exit);
	/*
	* Broadcom specific Advanced Microcontroller Bus
	* Broadcom USB-core driver (BCMA bus glue)
	*
	* Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
	*
	* Based on ssb-ohci driver
	* Copyright 2007 Michael Buesch <m@bues.ch>
	*
	* Derived from the OHCI-PCI driver
	* Copyright 1999 Roman Weissgaerber
	* Copyright 2000-2002 David Brownell
	* Copyright 1999 Linus Torvalds
	* Copyright 1999 Gregory P. Smith
	*
	* Derived from the USBcore related parts of Broadcom-SB
	* Copyright 2005-2011 Broadcom Corporation
	*
	* Licensed under the GNU/GPL. See COPYING for details.
	*/
	#include <linux/bcma/bcma.h>
	#include <linux/delay.h>
	#include <linux/platform_device.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/usb/ehci_pdriver.h>
	#include <linux/usb/ohci_pdriver.h>

	MODULE_AUTHOR("Hauke Mehrtens");
	MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
	MODULE_LICENSE("GPL");

	struct bcma_hcd_device {
	struct platform_device *ehci_dev;
	struct platform_device *ohci_dev;
	};

	/* Wait for bitmask in a register to get set or cleared.
	* timeout is in units of ten-microseconds.
	*/
	static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
	int timeout)
	{
	int i;
	u32 val;

	for (i = 0; i < timeout; i++) {
	val = bcma_read32(dev, reg);
	if ((val & bitmask) == bitmask)
	return 0;
	udelay(10);
	}

	return -ETIMEDOUT;
	}

	static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
	{
	#ifdef CONFIG_BCMA_DRIVER_MIPS
	/* Work around for 4716 failures. */
	if (dev->bus->chipinfo.id == 0x4716) {
	u32 tmp;

	tmp = bcma_cpu_clock(&dev->bus->drv_mips);
	if (tmp >= 480000000)
	tmp = 0x1846b; /* set CDR to 0x11(fast) */
	else if (tmp == 453000000)
	tmp = 0x1046b; /* set CDR to 0x10(slow) */
	else
	tmp = 0;

	/* Change Shim mdio control reg to fix host not acking at
	* high frequencies
	*/
	if (tmp) {
	bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
	udelay(500);

	bcma_write32(dev, 0x524, tmp);
	udelay(500);
	bcma_write32(dev, 0x524, 0x4ab);
	udelay(500);
	bcma_read32(dev, 0x528);
	bcma_write32(dev, 0x528, 0x80000000);
	}
	}
	#endif /* CONFIG_BCMA_DRIVER_MIPS */
	}

	/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
	static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
	{
	u32 tmp;

	/*
	* USB 2.0 special considerations:
	*
	* 1. Since the core supports both OHCI and EHCI functions, it must
	* only be reset once.
	*
	* 2. In addition to the standard SI reset sequence, the Host Control
	* Register must be programmed to bring the USB core and various
	* phy components out of reset.
	*/
	if (!bcma_core_is_enabled(dev)) {
	bcma_core_enable(dev, 0);
	mdelay(10);
	if (dev->id.rev >= 5) {
	/* Enable Misc PLL */
	tmp = bcma_read32(dev, 0x1e0);
	tmp \|= 0x100;
	bcma_write32(dev, 0x1e0, tmp);
	if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
	printk(KERN_EMERG "Failed to enable misc PPL!\n");

	/* Take out of resets */
	bcma_write32(dev, 0x200, 0x4ff);
	udelay(25);
	bcma_write32(dev, 0x200, 0x6ff);
	udelay(25);

	/* Make sure digital and AFE are locked in USB PHY */
	bcma_write32(dev, 0x524, 0x6b);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);
	udelay(50);
	bcma_write32(dev, 0x524, 0xab);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);
	udelay(50);
	bcma_write32(dev, 0x524, 0x2b);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);
	udelay(50);
	bcma_write32(dev, 0x524, 0x10ab);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);

	if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
	tmp = bcma_read32(dev, 0x528);
	printk(KERN_EMERG
	"USB20H mdio_rddata 0x%08x\n", tmp);
	}
	bcma_write32(dev, 0x528, 0x80000000);
	tmp = bcma_read32(dev, 0x314);
	udelay(265);
	bcma_write32(dev, 0x200, 0x7ff);
	udelay(10);

	/* Take USB and HSIC out of non-driving modes */
	bcma_write32(dev, 0x510, 0);
	} else {
	bcma_write32(dev, 0x200, 0x7ff);

	udelay(1);
	}

	bcma_hcd_4716wa(dev);
	}
	}

	static const struct usb_ehci_pdata ehci_pdata = {
	};

	static const struct usb_ohci_pdata ohci_pdata = {
	};

	static struct platform_device * __devinit
	bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
	{
	struct platform_device *hci_dev;
	struct resource hci_res[2];
	int ret = -ENOMEM;

	memset(hci_res, 0, sizeof(hci_res));

	hci_res[0].start = addr;
	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
	hci_res[0].flags = IORESOURCE_MEM;

	hci_res[1].start = dev->irq;
	hci_res[1].flags = IORESOURCE_IRQ;

	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
	"ehci-platform" , 0);
	if (!hci_dev)
	return NULL;

	hci_dev->dev.parent = &dev->dev;
	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

	ret = platform_device_add_resources(hci_dev, hci_res,
	ARRAY_SIZE(hci_res));
	if (ret)
	goto err_alloc;
	if (ohci)
	ret = platform_device_add_data(hci_dev, &ohci_pdata,
	sizeof(ohci_pdata));
	else
	ret = platform_device_add_data(hci_dev, &ehci_pdata,
	sizeof(ehci_pdata));
	if (ret)
	goto err_alloc;
	ret = platform_device_add(hci_dev);
	if (ret)
	goto err_alloc;

	return hci_dev;

	err_alloc:
	platform_device_put(hci_dev);
	return ERR_PTR(ret);
	}

	static int __devinit bcma_hcd_probe(struct bcma_device *dev)
	{
	int err;
	u16 chipid_top;
	u32 ohci_addr;
	struct bcma_hcd_device *usb_dev;
	struct bcma_chipinfo *chipinfo;

	chipinfo = &dev->bus->chipinfo;
	/* USBcores are only connected on embedded devices. */
	chipid_top = (chipinfo->id & 0xFF00);
	if (chipid_top != 0x4700 && chipid_top != 0x5300)
	return -ENODEV;

	/* TODO: Probably need checks here; is the core connected? */

	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) \|\|
	dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
	return -EOPNOTSUPP;

	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
	if (!usb_dev)
	return -ENOMEM;

	bcma_hcd_init_chip(dev);

	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
	ohci_addr = dev->addr1;
	if ((chipinfo->id == 0x5357 \|\| chipinfo->id == 0x4749)
	&& chipinfo->rev == 0)
	ohci_addr = 0x18009000;

	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
	if (IS_ERR(usb_dev->ohci_dev)) {
	err = PTR_ERR(usb_dev->ohci_dev);
	goto err_free_usb_dev;
	}

	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
	if (IS_ERR(usb_dev->ehci_dev)) {
	err = PTR_ERR(usb_dev->ehci_dev);
	goto err_unregister_ohci_dev;
	}

	bcma_set_drvdata(dev, usb_dev);
	return 0;

	err_unregister_ohci_dev:
	platform_device_unregister(usb_dev->ohci_dev);
	err_free_usb_dev:
	kfree(usb_dev);
	return err;
	}

	static void __devexit bcma_hcd_remove(struct bcma_device *dev)
	{
	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
	struct platform_device *ohci_dev = usb_dev->ohci_dev;
	struct platform_device *ehci_dev = usb_dev->ehci_dev;

	if (ohci_dev)
	platform_device_unregister(ohci_dev);
	if (ehci_dev)
	platform_device_unregister(ehci_dev);

	bcma_core_disable(dev, 0);
	}

	static void bcma_hcd_shutdown(struct bcma_device *dev)
	{
	bcma_core_disable(dev, 0);
	}

	#ifdef CONFIG_PM

	static int bcma_hcd_suspend(struct bcma_device *dev)
	{
	bcma_core_disable(dev, 0);

	return 0;
	}

	static int bcma_hcd_resume(struct bcma_device *dev)
	{
	bcma_core_enable(dev, 0);

	return 0;
	}

	#else /* !CONFIG_PM */
	#define bcma_hcd_suspend NULL
	#define bcma_hcd_resume NULL
	#endif /* CONFIG_PM */

	static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
	BCMA_CORETABLE_END
	};
	MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);

	static struct bcma_driver bcma_hcd_driver = {
	.name = KBUILD_MODNAME,
	.id_table = bcma_hcd_table,
	.probe = bcma_hcd_probe,
	.remove = __devexit_p(bcma_hcd_remove),
	.shutdown = bcma_hcd_shutdown,
	.suspend = bcma_hcd_suspend,
	.resume = bcma_hcd_resume,
	};

	static int __init bcma_hcd_init(void)
	{
	return bcma_driver_register(&bcma_hcd_driver);
	}
	module_init(bcma_hcd_init);

	static void __exit bcma_hcd_exit(void)
	{
	bcma_driver_unregister(&bcma_hcd_driver);
	}
	module_exit(bcma_hcd_exit);