| /* |
| * Some parts based on code from net80211 |
| * Copyright (c) 2001 Atsushi Onoe |
| * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #include "ieee80211softmac_priv.h" |
| |
| /* Helper functions for inserting data into the frames */ |
| |
| /* |
| * Adds an ESSID element to the frame |
| * |
| */ |
| static u8 * |
| ieee80211softmac_add_essid(u8 *dst, struct ieee80211softmac_essid *essid) |
| { |
| if (essid) { |
| *dst++ = MFIE_TYPE_SSID; |
| *dst++ = essid->len; |
| memcpy(dst, essid->data, essid->len); |
| return dst+essid->len; |
| } else { |
| *dst++ = MFIE_TYPE_SSID; |
| *dst++ = 0; |
| return dst; |
| } |
| } |
| |
| /* Adds Supported Rates and if required Extended Rates Information Element |
| * to the frame, ASSUMES WE HAVE A SORTED LIST OF RATES */ |
| static u8 * |
| ieee80211softmac_frame_add_rates(u8 *dst, const struct ieee80211softmac_ratesinfo *r) |
| { |
| int cck_len, ofdm_len; |
| *dst++ = MFIE_TYPE_RATES; |
| |
| for(cck_len=0; ieee80211_is_cck_rate(r->rates[cck_len]) && (cck_len < r->count);cck_len++); |
| |
| if(cck_len > IEEE80211SOFTMAC_MAX_RATES_LEN) |
| cck_len = IEEE80211SOFTMAC_MAX_RATES_LEN; |
| *dst++ = cck_len; |
| memcpy(dst, r->rates, cck_len); |
| dst += cck_len; |
| |
| if(cck_len < r->count){ |
| for (ofdm_len=0; ieee80211_is_ofdm_rate(r->rates[ofdm_len + cck_len]) && (ofdm_len + cck_len < r->count); ofdm_len++); |
| if (ofdm_len > 0) { |
| if (ofdm_len > IEEE80211SOFTMAC_MAX_EX_RATES_LEN) |
| ofdm_len = IEEE80211SOFTMAC_MAX_EX_RATES_LEN; |
| *dst++ = MFIE_TYPE_RATES_EX; |
| *dst++ = ofdm_len; |
| memcpy(dst, r->rates + cck_len, ofdm_len); |
| dst += ofdm_len; |
| } |
| } |
| return dst; |
| } |
| |
| /* Allocate a management frame */ |
| static u8 * |
| ieee80211softmac_alloc_mgt(u32 size) |
| { |
| u8 * data; |
| |
| /* Add the header and FCS to the size */ |
| size = size + IEEE80211_3ADDR_LEN; |
| if(size > IEEE80211_DATA_LEN) |
| return NULL; |
| /* Allocate the frame */ |
| data = kmalloc(size, GFP_ATOMIC); |
| memset(data, 0, size); |
| return data; |
| } |
| |
| /* |
| * Add a 2 Address Header |
| */ |
| static void |
| ieee80211softmac_hdr_2addr(struct ieee80211softmac_device *mac, |
| struct ieee80211_hdr_2addr *header, u32 type, u8 *dest) |
| { |
| /* Fill in the frame control flags */ |
| header->frame_ctl = cpu_to_le16(type); |
| /* Control packets always have WEP turned off */ |
| if(type > IEEE80211_STYPE_CFENDACK && type < IEEE80211_STYPE_PSPOLL) |
| header->frame_ctl |= mac->ieee->sec.level ? cpu_to_le16(IEEE80211_FCTL_PROTECTED) : 0; |
| |
| /* Fill in the duration */ |
| header->duration_id = 0; |
| /* FIXME: How do I find this? |
| * calculate. But most drivers just fill in 0 (except if it's a station id of course) */ |
| |
| /* Fill in the Destination Address */ |
| if(dest == NULL) |
| memset(header->addr1, 0xFF, ETH_ALEN); |
| else |
| memcpy(header->addr1, dest, ETH_ALEN); |
| /* Fill in the Source Address */ |
| memcpy(header->addr2, mac->ieee->dev->dev_addr, ETH_ALEN); |
| |
| } |
| |
| |
| /* Add a 3 Address Header */ |
| static void |
| ieee80211softmac_hdr_3addr(struct ieee80211softmac_device *mac, |
| struct ieee80211_hdr_3addr *header, u32 type, u8 *dest, u8 *bssid) |
| { |
| /* This is common with 2addr, so use that instead */ |
| ieee80211softmac_hdr_2addr(mac, (struct ieee80211_hdr_2addr *)header, type, dest); |
| |
| /* Fill in the BSS ID */ |
| if(bssid == NULL) |
| memset(header->addr3, 0xFF, ETH_ALEN); |
| else |
| memcpy(header->addr3, bssid, ETH_ALEN); |
| |
| /* Fill in the sequence # */ |
| /* FIXME: I need to add this to the softmac struct |
| * shouldn't the sequence number be in ieee80211? */ |
| } |
| |
| |
| /***************************************************************************** |
| * Create Management packets |
| *****************************************************************************/ |
| |
| /* Creates an association request packet */ |
| static u32 |
| ieee80211softmac_assoc_req(struct ieee80211_assoc_request **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net) |
| { |
| u8 *data; |
| (*pkt) = (struct ieee80211_assoc_request *)ieee80211softmac_alloc_mgt( |
| 2 + /* Capability Info */ |
| 2 + /* Listen Interval */ |
| /* SSID IE */ |
| 1 + 1 + IW_ESSID_MAX_SIZE + |
| /* Rates IE */ |
| 1 + 1 + IEEE80211SOFTMAC_MAX_RATES_LEN + |
| /* Extended Rates IE */ |
| 1 + 1 + IEEE80211SOFTMAC_MAX_EX_RATES_LEN + |
| /* WPA IE if present */ |
| mac->wpa.IElen |
| /* Other IE's? Optional? |
| * Yeah, probably need an extra IE parameter -- lots of vendors like to |
| * fill in their own IEs */ |
| ); |
| if (unlikely((*pkt) == NULL)) |
| return 0; |
| ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_ASSOC_REQ, net->bssid, net->bssid); |
| |
| /* Fill in capability Info */ |
| (*pkt)->capability = (mac->ieee->iw_mode == IW_MODE_MASTER) || (mac->ieee->iw_mode == IW_MODE_INFRA) ? |
| cpu_to_le16(WLAN_CAPABILITY_ESS) : |
| cpu_to_le16(WLAN_CAPABILITY_IBSS); |
| /* Need to add this |
| (*pkt)->capability |= mac->ieee->short_slot ? |
| cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME) : 0; |
| */ |
| (*pkt)->capability |= mac->ieee->sec.level ? cpu_to_le16(WLAN_CAPABILITY_PRIVACY) : 0; |
| /* Fill in Listen Interval (?) */ |
| (*pkt)->listen_interval = cpu_to_le16(10); |
| |
| data = (u8 *)(*pkt)->info_element; |
| /* Add SSID */ |
| data = ieee80211softmac_add_essid(data, &net->essid); |
| /* Add Rates */ |
| data = ieee80211softmac_frame_add_rates(data, &mac->ratesinfo); |
| /* Add WPA IE */ |
| if (mac->wpa.IElen && mac->wpa.IE) { |
| memcpy(data, mac->wpa.IE, mac->wpa.IElen); |
| data += mac->wpa.IElen; |
| } |
| /* Return the number of used bytes */ |
| return (data - (u8*)(*pkt)); |
| } |
| |
| /* Create a reassociation request packet */ |
| static u32 |
| ieee80211softmac_reassoc_req(struct ieee80211_reassoc_request **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net) |
| { |
| u8 *data; |
| (*pkt) = (struct ieee80211_reassoc_request *)ieee80211softmac_alloc_mgt( |
| 2 + /* Capability Info */ |
| 2 + /* Listen Interval */ |
| ETH_ALEN + /* AP MAC */ |
| /* SSID IE */ |
| 1 + 1 + IW_ESSID_MAX_SIZE + |
| /* Rates IE */ |
| 1 + 1 + IEEE80211SOFTMAC_MAX_RATES_LEN + |
| /* Extended Rates IE */ |
| 1 + 1 + IEEE80211SOFTMAC_MAX_EX_RATES_LEN |
| /* Other IE's? */ |
| ); |
| if (unlikely((*pkt) == NULL)) |
| return 0; |
| ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_REASSOC_REQ, net->bssid, net->bssid); |
| |
| /* Fill in capability Info */ |
| (*pkt)->capability = mac->ieee->iw_mode == IW_MODE_MASTER ? |
| cpu_to_le16(WLAN_CAPABILITY_ESS) : |
| cpu_to_le16(WLAN_CAPABILITY_IBSS); |
| /* |
| (*pkt)->capability |= mac->ieee->short_slot ? |
| cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME) : 0; |
| */ |
| (*pkt)->capability |= mac->ieee->sec.level ? |
| cpu_to_le16(WLAN_CAPABILITY_PRIVACY) : 0; |
| |
| /* Fill in Listen Interval (?) */ |
| (*pkt)->listen_interval = cpu_to_le16(10); |
| /* Fill in the current AP MAC */ |
| memcpy((*pkt)->current_ap, mac->ieee->bssid, ETH_ALEN); |
| |
| data = (u8 *)(*pkt)->info_element; |
| /* Add SSID */ |
| data = ieee80211softmac_add_essid(data, &net->essid); |
| /* Add Rates */ |
| data = ieee80211softmac_frame_add_rates(data, &mac->ratesinfo); |
| /* Return packet size */ |
| return (data - (u8 *)(*pkt)); |
| } |
| |
| /* Create an authentication packet */ |
| static u32 |
| ieee80211softmac_auth(struct ieee80211_auth **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net, |
| u16 transaction, u16 status) |
| { |
| u8 *data; |
| /* Allocate Packet */ |
| (*pkt) = (struct ieee80211_auth *)ieee80211softmac_alloc_mgt( |
| 2 + /* Auth Algorithm */ |
| 2 + /* Auth Transaction Seq */ |
| 2 + /* Status Code */ |
| /* Challenge Text IE */ |
| mac->ieee->open_wep ? 0 : |
| 1 + 1 + WLAN_AUTH_CHALLENGE_LEN |
| ); |
| if (unlikely((*pkt) == NULL)) |
| return 0; |
| ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_AUTH, net->bssid, net->bssid); |
| |
| /* Algorithm */ |
| (*pkt)->algorithm = mac->ieee->open_wep ? |
| cpu_to_le16(WLAN_AUTH_OPEN) : |
| cpu_to_le16(WLAN_AUTH_SHARED_KEY); |
| /* Transaction */ |
| (*pkt)->transaction = cpu_to_le16(transaction); |
| /* Status */ |
| (*pkt)->status = cpu_to_le16(status); |
| |
| data = (u8 *)(*pkt)->info_element; |
| /* Challenge Text */ |
| if(!mac->ieee->open_wep){ |
| *data = MFIE_TYPE_CHALLENGE; |
| data++; |
| |
| /* Copy the challenge in */ |
| // *data = challenge length |
| // data += sizeof(u16); |
| // memcpy(data, challenge, challenge length); |
| // data += challenge length; |
| |
| /* Add the full size to the packet length */ |
| } |
| |
| /* Return the packet size */ |
| return (data - (u8 *)(*pkt)); |
| } |
| |
| /* Create a disassocation or deauthentication packet */ |
| static u32 |
| ieee80211softmac_disassoc_deauth(struct ieee80211_disassoc **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net, |
| u16 type, u16 reason) |
| { |
| /* Allocate Packet */ |
| (*pkt) = (struct ieee80211_disassoc *)ieee80211softmac_alloc_mgt(2); |
| if (unlikely((*pkt) == NULL)) |
| return 0; |
| ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), type, net->bssid, net->bssid); |
| /* Reason */ |
| (*pkt)->reason = cpu_to_le16(reason); |
| /* Return the packet size */ |
| return (2 + IEEE80211_3ADDR_LEN); |
| } |
| |
| /* Create a probe request packet */ |
| static u32 |
| ieee80211softmac_probe_req(struct ieee80211_probe_request **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_essid *essid) |
| { |
| u8 *data; |
| /* Allocate Packet */ |
| (*pkt) = (struct ieee80211_probe_request *)ieee80211softmac_alloc_mgt( |
| /* SSID of requested network */ |
| 1 + 1 + IW_ESSID_MAX_SIZE + |
| /* Rates IE */ |
| 1 + 1 + IEEE80211SOFTMAC_MAX_RATES_LEN + |
| /* Extended Rates IE */ |
| 1 + 1 + IEEE80211SOFTMAC_MAX_EX_RATES_LEN |
| ); |
| if (unlikely((*pkt) == NULL)) |
| return 0; |
| ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_PROBE_REQ, NULL, NULL); |
| |
| data = (u8 *)(*pkt)->info_element; |
| /* Add ESSID (can be NULL) */ |
| data = ieee80211softmac_add_essid(data, essid); |
| /* Add Rates */ |
| data = ieee80211softmac_frame_add_rates(data, &mac->ratesinfo); |
| /* Return packet size */ |
| return (data - (u8 *)(*pkt)); |
| } |
| |
| /* Create a probe response packet */ |
| /* FIXME: Not complete */ |
| static u32 |
| ieee80211softmac_probe_resp(struct ieee80211_probe_response **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net) |
| { |
| u8 *data; |
| /* Allocate Packet */ |
| (*pkt) = (struct ieee80211_probe_response *)ieee80211softmac_alloc_mgt( |
| 8 + /* Timestamp */ |
| 2 + /* Beacon Interval */ |
| 2 + /* Capability Info */ |
| /* SSID IE */ |
| 1 + 1 + IW_ESSID_MAX_SIZE + |
| 7 + /* FH Parameter Set */ |
| 2 + /* DS Parameter Set */ |
| 8 + /* CF Parameter Set */ |
| 4 /* IBSS Parameter Set */ |
| ); |
| if (unlikely((*pkt) == NULL)) |
| return 0; |
| ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_PROBE_RESP, net->bssid, net->bssid); |
| data = (u8 *)(*pkt)->info_element; |
| |
| /* Return the packet size */ |
| return (data - (u8 *)(*pkt)); |
| } |
| |
| |
| /* Sends a manangement packet |
| * FIXME: document the use of the arg parameter |
| * for _AUTH: (transaction #) | (status << 16) |
| */ |
| int |
| ieee80211softmac_send_mgt_frame(struct ieee80211softmac_device *mac, |
| void *ptrarg, u32 type, u32 arg) |
| { |
| void *pkt = NULL; |
| u32 pkt_size = 0; |
| |
| switch(type) { |
| case IEEE80211_STYPE_ASSOC_REQ: |
| pkt_size = ieee80211softmac_assoc_req((struct ieee80211_assoc_request **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg); |
| break; |
| case IEEE80211_STYPE_REASSOC_REQ: |
| pkt_size = ieee80211softmac_reassoc_req((struct ieee80211_reassoc_request **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg); |
| break; |
| case IEEE80211_STYPE_AUTH: |
| pkt_size = ieee80211softmac_auth((struct ieee80211_auth **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg, (u16)(arg & 0xFFFF), (u16) (arg >> 16)); |
| break; |
| case IEEE80211_STYPE_DISASSOC: |
| case IEEE80211_STYPE_DEAUTH: |
| pkt_size = ieee80211softmac_disassoc_deauth((struct ieee80211_disassoc **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg, type, (u16)(arg & 0xFFFF)); |
| break; |
| case IEEE80211_STYPE_PROBE_REQ: |
| pkt_size = ieee80211softmac_probe_req((struct ieee80211_probe_request **)(&pkt), mac, (struct ieee80211softmac_essid *)ptrarg); |
| break; |
| case IEEE80211_STYPE_PROBE_RESP: |
| pkt_size = ieee80211softmac_probe_resp((struct ieee80211_probe_response **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg); |
| break; |
| default: |
| printkl(KERN_DEBUG PFX "Unsupported Management Frame type: %i\n", type); |
| return -EINVAL; |
| }; |
| |
| if(pkt_size == 0 || pkt == NULL) { |
| printkl(KERN_DEBUG PFX "Error, packet is nonexistant or 0 length\n"); |
| return -ENOMEM; |
| } |
| |
| /* Send the packet to the ieee80211 layer for tx */ |
| /* we defined softmac->mgmt_xmit for this. Should we keep it |
| * as it is (that means we'd need to wrap this into a txb), |
| * modify the prototype (so it matches this function), |
| * or get rid of it alltogether? |
| * Does this work for you now? |
| */ |
| ieee80211_tx_frame(mac->ieee, (struct ieee80211_hdr *)pkt, pkt_size); |
| |
| kfree(pkt); |
| return 0; |
| } |
| |
| |
| /* Create an rts/cts frame */ |
| static u32 |
| ieee80211softmac_rts_cts(struct ieee80211_hdr_2addr **pkt, |
| struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net, |
| u32 type) |
| { |
| /* Allocate Packet */ |
| (*pkt) = kmalloc(IEEE80211_2ADDR_LEN, GFP_ATOMIC); |
| memset(*pkt, 0, IEEE80211_2ADDR_LEN); |
| if((*pkt) == NULL) |
| return 0; |
| ieee80211softmac_hdr_2addr(mac, (*pkt), type, net->bssid); |
| return IEEE80211_2ADDR_LEN; |
| } |
| |
| |
| /* Sends a control packet */ |
| static int |
| ieee80211softmac_send_ctl_frame(struct ieee80211softmac_device *mac, |
| struct ieee80211softmac_network *net, u32 type, u32 arg) |
| { |
| void *pkt = NULL; |
| u32 pkt_size = 0; |
| |
| switch(type) { |
| case IEEE80211_STYPE_RTS: |
| case IEEE80211_STYPE_CTS: |
| pkt_size = ieee80211softmac_rts_cts((struct ieee80211_hdr_2addr **)(&pkt), mac, net, type); |
| break; |
| default: |
| printkl(KERN_DEBUG PFX "Unsupported Control Frame type: %i\n", type); |
| return -EINVAL; |
| } |
| |
| if(pkt_size == 0) |
| return -ENOMEM; |
| |
| /* Send the packet to the ieee80211 layer for tx */ |
| ieee80211_tx_frame(mac->ieee, (struct ieee80211_hdr *) pkt, pkt_size); |
| |
| kfree(pkt); |
| return 0; |
| } |