| /******************************************************************************* |
| * |
| * "cs4281.c" -- Cirrus Logic-Crystal CS4281 linux audio driver. |
| * |
| * Copyright (C) 2000,2001 Cirrus Logic Corp. |
| * -- adapted from drivers by Thomas Sailer, |
| * -- but don't bug him; Problems should go to: |
| * -- tom woller (twoller@crystal.cirrus.com) or |
| * (audio@crystal.cirrus.com). |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Module command line parameters: |
| * none |
| * |
| * Supported devices: |
| * /dev/dsp standard /dev/dsp device, (mostly) OSS compatible |
| * /dev/mixer standard /dev/mixer device, (mostly) OSS compatible |
| * /dev/midi simple MIDI UART interface, no ioctl |
| * |
| * Modification History |
| * 08/20/00 trw - silence and no stopping DAC until release |
| * 08/23/00 trw - added CS_DBG statements, fix interrupt hang issue on DAC stop. |
| * 09/18/00 trw - added 16bit only record with conversion |
| * 09/24/00 trw - added Enhanced Full duplex (separate simultaneous |
| * capture/playback rates) |
| * 10/03/00 trw - fixed mmap (fixed GRECORD and the XMMS mmap test plugin |
| * libOSSm.so) |
| * 10/11/00 trw - modified for 2.4.0-test9 kernel enhancements (NR_MAP removal) |
| * 11/03/00 trw - fixed interrupt loss/stutter, added debug. |
| * 11/10/00 bkz - added __devinit to cs4281_hw_init() |
| * 11/10/00 trw - fixed SMP and capture spinlock hang. |
| * 12/04/00 trw - cleaned up CSDEBUG flags and added "defaultorder" moduleparm. |
| * 12/05/00 trw - fixed polling (myth2), and added underrun swptr fix. |
| * 12/08/00 trw - added PM support. |
| * 12/14/00 trw - added wrapper code, builds under 2.4.0, 2.2.17-20, 2.2.17-8 |
| * (RH/Dell base), 2.2.18, 2.2.12. cleaned up code mods by ident. |
| * 12/19/00 trw - added PM support for 2.2 base (apm_callback). other PM cleanup. |
| * 12/21/00 trw - added fractional "defaultorder" inputs. if >100 then use |
| * defaultorder-100 as power of 2 for the buffer size. example: |
| * 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size. |
| * |
| *******************************************************************************/ |
| |
| /* uncomment the following line to disable building PM support into the driver */ |
| //#define NOT_CS4281_PM 1 |
| |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/delay.h> |
| #include <linux/sound.h> |
| #include <linux/slab.h> |
| #include <linux/soundcard.h> |
| #include <linux/pci.h> |
| #include <linux/bitops.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/poll.h> |
| #include <linux/fs.h> |
| #include <linux/wait.h> |
| |
| #include <asm/current.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/page.h> |
| #include <asm/uaccess.h> |
| |
| //#include "cs_dm.h" |
| #include "cs4281_hwdefs.h" |
| #include "cs4281pm.h" |
| |
| struct cs4281_state; |
| |
| static void stop_dac(struct cs4281_state *s); |
| static void stop_adc(struct cs4281_state *s); |
| static void start_dac(struct cs4281_state *s); |
| static void start_adc(struct cs4281_state *s); |
| #undef OSS_DOCUMENTED_MIXER_SEMANTICS |
| |
| // --------------------------------------------------------------------- |
| |
| #ifndef PCI_VENDOR_ID_CIRRUS |
| #define PCI_VENDOR_ID_CIRRUS 0x1013 |
| #endif |
| #ifndef PCI_DEVICE_ID_CRYSTAL_CS4281 |
| #define PCI_DEVICE_ID_CRYSTAL_CS4281 0x6005 |
| #endif |
| |
| #define CS4281_MAGIC ((PCI_DEVICE_ID_CRYSTAL_CS4281<<16) | PCI_VENDOR_ID_CIRRUS) |
| #define CS4281_CFLR_DEFAULT 0x00000001 /* CFLR must be in AC97 link mode */ |
| |
| // buffer order determines the size of the dma buffer for the driver. |
| // under Linux, a smaller buffer allows more responsiveness from many of the |
| // applications (e.g. games). A larger buffer allows some of the apps (esound) |
| // to not underrun the dma buffer as easily. As default, use 32k (order=3) |
| // rather than 64k as some of the games work more responsively. |
| // log base 2( buff sz = 32k). |
| static unsigned long defaultorder = 3; |
| module_param(defaultorder, ulong, 0); |
| |
| // |
| // Turn on/off debugging compilation by commenting out "#define CSDEBUG" |
| // |
| #define CSDEBUG 1 |
| #if CSDEBUG |
| #define CSDEBUG_INTERFACE 1 |
| #else |
| #undef CSDEBUG_INTERFACE |
| #endif |
| // |
| // cs_debugmask areas |
| // |
| #define CS_INIT 0x00000001 // initialization and probe functions |
| #define CS_ERROR 0x00000002 // tmp debugging bit placeholder |
| #define CS_INTERRUPT 0x00000004 // interrupt handler (separate from all other) |
| #define CS_FUNCTION 0x00000008 // enter/leave functions |
| #define CS_WAVE_WRITE 0x00000010 // write information for wave |
| #define CS_WAVE_READ 0x00000020 // read information for wave |
| #define CS_MIDI_WRITE 0x00000040 // write information for midi |
| #define CS_MIDI_READ 0x00000080 // read information for midi |
| #define CS_MPU401_WRITE 0x00000100 // write information for mpu401 |
| #define CS_MPU401_READ 0x00000200 // read information for mpu401 |
| #define CS_OPEN 0x00000400 // all open functions in the driver |
| #define CS_RELEASE 0x00000800 // all release functions in the driver |
| #define CS_PARMS 0x00001000 // functional and operational parameters |
| #define CS_IOCTL 0x00002000 // ioctl (non-mixer) |
| #define CS_PM 0x00004000 // power management |
| #define CS_TMP 0x10000000 // tmp debug mask bit |
| |
| #define CS_IOCTL_CMD_SUSPEND 0x1 // suspend |
| #define CS_IOCTL_CMD_RESUME 0x2 // resume |
| // |
| // CSDEBUG is usual mode is set to 1, then use the |
| // cs_debuglevel and cs_debugmask to turn on or off debugging. |
| // Debug level of 1 has been defined to be kernel errors and info |
| // that should be printed on any released driver. |
| // |
| #if CSDEBUG |
| #define CS_DBGOUT(mask,level,x) if((cs_debuglevel >= (level)) && ((mask) & cs_debugmask) ) {x;} |
| #else |
| #define CS_DBGOUT(mask,level,x) |
| #endif |
| |
| #if CSDEBUG |
| static unsigned long cs_debuglevel = 1; // levels range from 1-9 |
| static unsigned long cs_debugmask = CS_INIT | CS_ERROR; // use CS_DBGOUT with various mask values |
| module_param(cs_debuglevel, ulong, 0); |
| module_param(cs_debugmask, ulong, 0); |
| #endif |
| #define CS_TRUE 1 |
| #define CS_FALSE 0 |
| |
| // MIDI buffer sizes |
| #define MIDIINBUF 500 |
| #define MIDIOUTBUF 500 |
| |
| #define FMODE_MIDI_SHIFT 3 |
| #define FMODE_MIDI_READ (FMODE_READ << FMODE_MIDI_SHIFT) |
| #define FMODE_MIDI_WRITE (FMODE_WRITE << FMODE_MIDI_SHIFT) |
| |
| #define CS4281_MAJOR_VERSION 1 |
| #define CS4281_MINOR_VERSION 13 |
| #ifdef __ia64__ |
| #define CS4281_ARCH 64 //architecture key |
| #else |
| #define CS4281_ARCH 32 //architecture key |
| #endif |
| |
| #define CS_TYPE_ADC 0 |
| #define CS_TYPE_DAC 1 |
| |
| |
| static const char invalid_magic[] = |
| KERN_CRIT "cs4281: invalid magic value\n"; |
| |
| #define VALIDATE_STATE(s) \ |
| ({ \ |
| if (!(s) || (s)->magic != CS4281_MAGIC) { \ |
| printk(invalid_magic); \ |
| return -ENXIO; \ |
| } \ |
| }) |
| |
| //LIST_HEAD(cs4281_devs); |
| static struct list_head cs4281_devs = { &cs4281_devs, &cs4281_devs }; |
| |
| struct cs4281_state; |
| |
| #include "cs4281_wrapper-24.c" |
| |
| struct cs4281_state { |
| // magic |
| unsigned int magic; |
| |
| // we keep the cards in a linked list |
| struct cs4281_state *next; |
| |
| // pcidev is needed to turn off the DDMA controller at driver shutdown |
| struct pci_dev *pcidev; |
| struct list_head list; |
| |
| // soundcore stuff |
| int dev_audio; |
| int dev_mixer; |
| int dev_midi; |
| |
| // hardware resources |
| unsigned int pBA0phys, pBA1phys; |
| char __iomem *pBA0; |
| char __iomem *pBA1; |
| unsigned int irq; |
| |
| // mixer registers |
| struct { |
| unsigned short vol[10]; |
| unsigned int recsrc; |
| unsigned int modcnt; |
| unsigned short micpreamp; |
| } mix; |
| |
| // wave stuff |
| struct properties { |
| unsigned fmt; |
| unsigned fmt_original; // original requested format |
| unsigned channels; |
| unsigned rate; |
| unsigned char clkdiv; |
| } prop_dac, prop_adc; |
| unsigned conversion:1; // conversion from 16 to 8 bit in progress |
| void *tmpbuff; // tmp buffer for sample conversions |
| unsigned ena; |
| spinlock_t lock; |
| struct mutex open_sem; |
| struct mutex open_sem_adc; |
| struct mutex open_sem_dac; |
| mode_t open_mode; |
| wait_queue_head_t open_wait; |
| wait_queue_head_t open_wait_adc; |
| wait_queue_head_t open_wait_dac; |
| |
| dma_addr_t dmaaddr_tmpbuff; |
| unsigned buforder_tmpbuff; // Log base 2 of 'rawbuf' size in bytes.. |
| struct dmabuf { |
| void *rawbuf; // Physical address of |
| dma_addr_t dmaaddr; |
| unsigned buforder; // Log base 2 of 'rawbuf' size in bytes.. |
| unsigned numfrag; // # of 'fragments' in the buffer. |
| unsigned fragshift; // Log base 2 of fragment size. |
| unsigned hwptr, swptr; |
| unsigned total_bytes; // # bytes process since open. |
| unsigned blocks; // last returned blocks value GETOPTR |
| unsigned wakeup; // interrupt occurred on block |
| int count; |
| unsigned underrun; // underrun flag |
| unsigned error; // over/underrun |
| wait_queue_head_t wait; |
| // redundant, but makes calculations easier |
| unsigned fragsize; // 2**fragshift.. |
| unsigned dmasize; // 2**buforder. |
| unsigned fragsamples; |
| // OSS stuff |
| unsigned mapped:1; // Buffer mapped in cs4281_mmap()? |
| unsigned ready:1; // prog_dmabuf_dac()/adc() successful? |
| unsigned endcleared:1; |
| unsigned type:1; // adc or dac buffer (CS_TYPE_XXX) |
| unsigned ossfragshift; |
| int ossmaxfrags; |
| unsigned subdivision; |
| } dma_dac, dma_adc; |
| |
| // midi stuff |
| struct { |
| unsigned ird, iwr, icnt; |
| unsigned ord, owr, ocnt; |
| wait_queue_head_t iwait; |
| wait_queue_head_t owait; |
| struct timer_list timer; |
| unsigned char ibuf[MIDIINBUF]; |
| unsigned char obuf[MIDIOUTBUF]; |
| } midi; |
| |
| struct cs4281_pm pm; |
| struct cs4281_pipeline pl[CS4281_NUMBER_OF_PIPELINES]; |
| }; |
| |
| #include "cs4281pm-24.c" |
| |
| #if CSDEBUG |
| |
| // DEBUG ROUTINES |
| |
| #define SOUND_MIXER_CS_GETDBGLEVEL _SIOWR('M',120, int) |
| #define SOUND_MIXER_CS_SETDBGLEVEL _SIOWR('M',121, int) |
| #define SOUND_MIXER_CS_GETDBGMASK _SIOWR('M',122, int) |
| #define SOUND_MIXER_CS_SETDBGMASK _SIOWR('M',123, int) |
| |
| #define SOUND_MIXER_CS_APM _SIOWR('M',124, int) |
| |
| |
| static void cs_printioctl(unsigned int x) |
| { |
| unsigned int i; |
| unsigned char vidx; |
| // Index of mixtable1[] member is Device ID |
| // and must be <= SOUND_MIXER_NRDEVICES. |
| // Value of array member is index into s->mix.vol[] |
| static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = { |
| [SOUND_MIXER_PCM] = 1, // voice |
| [SOUND_MIXER_LINE1] = 2, // AUX |
| [SOUND_MIXER_CD] = 3, // CD |
| [SOUND_MIXER_LINE] = 4, // Line |
| [SOUND_MIXER_SYNTH] = 5, // FM |
| [SOUND_MIXER_MIC] = 6, // Mic |
| [SOUND_MIXER_SPEAKER] = 7, // Speaker |
| [SOUND_MIXER_RECLEV] = 8, // Recording level |
| [SOUND_MIXER_VOLUME] = 9 // Master Volume |
| }; |
| |
| switch (x) { |
| case SOUND_MIXER_CS_GETDBGMASK: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_CS_GETDBGMASK:\n")); |
| break; |
| case SOUND_MIXER_CS_GETDBGLEVEL: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_CS_GETDBGLEVEL:\n")); |
| break; |
| case SOUND_MIXER_CS_SETDBGMASK: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_CS_SETDBGMASK:\n")); |
| break; |
| case SOUND_MIXER_CS_SETDBGLEVEL: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_CS_SETDBGLEVEL:\n")); |
| break; |
| case OSS_GETVERSION: |
| CS_DBGOUT(CS_IOCTL, 4, printk("OSS_GETVERSION:\n")); |
| break; |
| case SNDCTL_DSP_SYNC: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SYNC:\n")); |
| break; |
| case SNDCTL_DSP_SETDUPLEX: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETDUPLEX:\n")); |
| break; |
| case SNDCTL_DSP_GETCAPS: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETCAPS:\n")); |
| break; |
| case SNDCTL_DSP_RESET: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_RESET:\n")); |
| break; |
| case SNDCTL_DSP_SPEED: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SPEED:\n")); |
| break; |
| case SNDCTL_DSP_STEREO: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_STEREO:\n")); |
| break; |
| case SNDCTL_DSP_CHANNELS: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_CHANNELS:\n")); |
| break; |
| case SNDCTL_DSP_GETFMTS: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETFMTS:\n")); |
| break; |
| case SNDCTL_DSP_SETFMT: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETFMT:\n")); |
| break; |
| case SNDCTL_DSP_POST: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_POST:\n")); |
| break; |
| case SNDCTL_DSP_GETTRIGGER: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETTRIGGER:\n")); |
| break; |
| case SNDCTL_DSP_SETTRIGGER: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETTRIGGER:\n")); |
| break; |
| case SNDCTL_DSP_GETOSPACE: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOSPACE:\n")); |
| break; |
| case SNDCTL_DSP_GETISPACE: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETISPACE:\n")); |
| break; |
| case SNDCTL_DSP_NONBLOCK: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_NONBLOCK:\n")); |
| break; |
| case SNDCTL_DSP_GETODELAY: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETODELAY:\n")); |
| break; |
| case SNDCTL_DSP_GETIPTR: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETIPTR:\n")); |
| break; |
| case SNDCTL_DSP_GETOPTR: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOPTR:\n")); |
| break; |
| case SNDCTL_DSP_GETBLKSIZE: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETBLKSIZE:\n")); |
| break; |
| case SNDCTL_DSP_SETFRAGMENT: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SNDCTL_DSP_SETFRAGMENT:\n")); |
| break; |
| case SNDCTL_DSP_SUBDIVIDE: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SUBDIVIDE:\n")); |
| break; |
| case SOUND_PCM_READ_RATE: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_RATE:\n")); |
| break; |
| case SOUND_PCM_READ_CHANNELS: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_PCM_READ_CHANNELS:\n")); |
| break; |
| case SOUND_PCM_READ_BITS: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_BITS:\n")); |
| break; |
| case SOUND_PCM_WRITE_FILTER: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_PCM_WRITE_FILTER:\n")); |
| break; |
| case SNDCTL_DSP_SETSYNCRO: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETSYNCRO:\n")); |
| break; |
| case SOUND_PCM_READ_FILTER: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_FILTER:\n")); |
| break; |
| case SOUND_MIXER_PRIVATE1: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE1:\n")); |
| break; |
| case SOUND_MIXER_PRIVATE2: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE2:\n")); |
| break; |
| case SOUND_MIXER_PRIVATE3: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE3:\n")); |
| break; |
| case SOUND_MIXER_PRIVATE4: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE4:\n")); |
| break; |
| case SOUND_MIXER_PRIVATE5: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE5:\n")); |
| break; |
| case SOUND_MIXER_INFO: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_INFO:\n")); |
| break; |
| case SOUND_OLD_MIXER_INFO: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_OLD_MIXER_INFO:\n")); |
| break; |
| |
| default: |
| switch (_IOC_NR(x)) { |
| case SOUND_MIXER_VOLUME: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_VOLUME:\n")); |
| break; |
| case SOUND_MIXER_SPEAKER: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_SPEAKER:\n")); |
| break; |
| case SOUND_MIXER_RECLEV: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_RECLEV:\n")); |
| break; |
| case SOUND_MIXER_MIC: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_MIC:\n")); |
| break; |
| case SOUND_MIXER_SYNTH: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_SYNTH:\n")); |
| break; |
| case SOUND_MIXER_RECSRC: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_RECSRC:\n")); |
| break; |
| case SOUND_MIXER_DEVMASK: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_DEVMASK:\n")); |
| break; |
| case SOUND_MIXER_RECMASK: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_RECMASK:\n")); |
| break; |
| case SOUND_MIXER_STEREODEVS: |
| CS_DBGOUT(CS_IOCTL, 4, |
| printk("SOUND_MIXER_STEREODEVS:\n")); |
| break; |
| case SOUND_MIXER_CAPS: |
| CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_CAPS:\n")); |
| break; |
| default: |
| i = _IOC_NR(x); |
| if (i >= SOUND_MIXER_NRDEVICES |
| || !(vidx = mixtable1[i])) { |
| CS_DBGOUT(CS_IOCTL, 4, printk |
| ("UNKNOWN IOCTL: 0x%.8x NR=%d\n", |
| x, i)); |
| } else { |
| CS_DBGOUT(CS_IOCTL, 4, printk |
| ("SOUND_MIXER_IOCTL AC9x: 0x%.8x NR=%d\n", |
| x, i)); |
| } |
| break; |
| } |
| } |
| } |
| #endif |
| static int prog_dmabuf_adc(struct cs4281_state *s); |
| static void prog_codec(struct cs4281_state *s, unsigned type); |
| |
| // --------------------------------------------------------------------- |
| // |
| // Hardware Interfaces For the CS4281 |
| // |
| |
| |
| //****************************************************************************** |
| // "delayus()-- Delay for the specified # of microseconds. |
| //****************************************************************************** |
| static void delayus(struct cs4281_state *s, u32 delay) |
| { |
| u32 j; |
| if ((delay > 9999) && (s->pm.flags & CS4281_PM_IDLE)) { |
| j = (delay * HZ) / 1000000; /* calculate delay in jiffies */ |
| if (j < 1) |
| j = 1; /* minimum one jiffy. */ |
| current->state = TASK_UNINTERRUPTIBLE; |
| schedule_timeout(j); |
| } else |
| udelay(delay); |
| return; |
| } |
| |
| |
| //****************************************************************************** |
| // "cs4281_read_ac97" -- Reads a word from the specified location in the |
| // CS4281's address space(based on the BA0 register). |
| // |
| // 1. Write ACCAD = Command Address Register = 46Ch for AC97 register address |
| // 2. Write ACCDA = Command Data Register = 470h for data to write to AC97 register, |
| // 0h for reads. |
| // 3. Write ACCTL = Control Register = 460h for initiating the write |
| // 4. Read ACCTL = 460h, DCV should be reset by now and 460h = 17h |
| // 5. if DCV not cleared, break and return error |
| // 6. Read ACSTS = Status Register = 464h, check VSTS bit |
| //**************************************************************************** |
| static int cs4281_read_ac97(struct cs4281_state *card, u32 offset, |
| u32 * value) |
| { |
| u32 count, status; |
| |
| // Make sure that there is not data sitting |
| // around from a previous uncompleted access. |
| // ACSDA = Status Data Register = 47Ch |
| status = readl(card->pBA0 + BA0_ACSDA); |
| |
| // Setup the AC97 control registers on the CS4281 to send the |
| // appropriate command to the AC97 to perform the read. |
| // ACCAD = Command Address Register = 46Ch |
| // ACCDA = Command Data Register = 470h |
| // ACCTL = Control Register = 460h |
| // bit DCV - will clear when process completed |
| // bit CRW - Read command |
| // bit VFRM - valid frame enabled |
| // bit ESYN - ASYNC generation enabled |
| |
| // Get the actual AC97 register from the offset |
| writel(offset - BA0_AC97_RESET, card->pBA0 + BA0_ACCAD); |
| writel(0, card->pBA0 + BA0_ACCDA); |
| writel(ACCTL_DCV | ACCTL_CRW | ACCTL_VFRM | ACCTL_ESYN, |
| card->pBA0 + BA0_ACCTL); |
| |
| // Wait for the read to occur. |
| for (count = 0; count < 10; count++) { |
| // First, we want to wait for a short time. |
| udelay(25); |
| |
| // Now, check to see if the read has completed. |
| // ACCTL = 460h, DCV should be reset by now and 460h = 17h |
| if (!(readl(card->pBA0 + BA0_ACCTL) & ACCTL_DCV)) |
| break; |
| } |
| |
| // Make sure the read completed. |
| if (readl(card->pBA0 + BA0_ACCTL) & ACCTL_DCV) |
| return 1; |
| |
| // Wait for the valid status bit to go active. |
| for (count = 0; count < 10; count++) { |
| // Read the AC97 status register. |
| // ACSTS = Status Register = 464h |
| status = readl(card->pBA0 + BA0_ACSTS); |
| |
| // See if we have valid status. |
| // VSTS - Valid Status |
| if (status & ACSTS_VSTS) |
| break; |
| // Wait for a short while. |
| udelay(25); |
| } |
| |
| // Make sure we got valid status. |
| if (!(status & ACSTS_VSTS)) |
| return 1; |
| |
| // Read the data returned from the AC97 register. |
| // ACSDA = Status Data Register = 474h |
| *value = readl(card->pBA0 + BA0_ACSDA); |
| |
| // Success. |
| return (0); |
| } |
| |
| |
| //**************************************************************************** |
| // |
| // "cs4281_write_ac97()"-- writes a word to the specified location in the |
| // CS461x's address space (based on the part's base address zero register). |
| // |
| // 1. Write ACCAD = Command Address Register = 46Ch for AC97 register address |
| // 2. Write ACCDA = Command Data Register = 470h for data to write to AC97 reg. |
| // 3. Write ACCTL = Control Register = 460h for initiating the write |
| // 4. Read ACCTL = 460h, DCV should be reset by now and 460h = 07h |
| // 5. if DCV not cleared, break and return error |
| // |
| //**************************************************************************** |
| static int cs4281_write_ac97(struct cs4281_state *card, u32 offset, |
| u32 value) |
| { |
| u32 count, status=0; |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: cs_4281_write_ac97()+ \n")); |
| |
| // Setup the AC97 control registers on the CS4281 to send the |
| // appropriate command to the AC97 to perform the read. |
| // ACCAD = Command Address Register = 46Ch |
| // ACCDA = Command Data Register = 470h |
| // ACCTL = Control Register = 460h |
| // set DCV - will clear when process completed |
| // reset CRW - Write command |
| // set VFRM - valid frame enabled |
| // set ESYN - ASYNC generation enabled |
| // set RSTN - ARST# inactive, AC97 codec not reset |
| |
| // Get the actual AC97 register from the offset |
| |
| writel(offset - BA0_AC97_RESET, card->pBA0 + BA0_ACCAD); |
| writel(value, card->pBA0 + BA0_ACCDA); |
| writel(ACCTL_DCV | ACCTL_VFRM | ACCTL_ESYN, |
| card->pBA0 + BA0_ACCTL); |
| |
| // Wait for the write to occur. |
| for (count = 0; count < 100; count++) { |
| // First, we want to wait for a short time. |
| udelay(25); |
| // Now, check to see if the write has completed. |
| // ACCTL = 460h, DCV should be reset by now and 460h = 07h |
| status = readl(card->pBA0 + BA0_ACCTL); |
| if (!(status & ACCTL_DCV)) |
| break; |
| } |
| |
| // Make sure the write completed. |
| if (status & ACCTL_DCV) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO |
| "cs4281: cs_4281_write_ac97()- unable to write. ACCTL_DCV active\n")); |
| return 1; |
| } |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: cs_4281_write_ac97()- 0\n")); |
| // Success. |
| return 0; |
| } |
| |
| |
| //****************************************************************************** |
| // "Init4281()" -- Bring up the part. |
| //****************************************************************************** |
| static __devinit int cs4281_hw_init(struct cs4281_state *card) |
| { |
| u32 ac97_slotid; |
| u32 temp1, temp2; |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: cs4281_hw_init()+ \n")); |
| #ifndef NOT_CS4281_PM |
| if(!card) |
| return 1; |
| #endif |
| temp2 = readl(card->pBA0 + BA0_CFLR); |
| CS_DBGOUT(CS_INIT | CS_ERROR | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_hw_init() CFLR 0x%x\n", temp2)); |
| if(temp2 != CS4281_CFLR_DEFAULT) |
| { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_INFO |
| "cs4281: cs4281_hw_init() CFLR invalid - resetting from 0x%x to 0x%x\n", |
| temp2,CS4281_CFLR_DEFAULT)); |
| writel(CS4281_CFLR_DEFAULT, card->pBA0 + BA0_CFLR); |
| temp2 = readl(card->pBA0 + BA0_CFLR); |
| if(temp2 != CS4281_CFLR_DEFAULT) |
| { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_INFO |
| "cs4281: cs4281_hw_init() Invalid hardware - unable to configure CFLR\n")); |
| return 1; |
| } |
| } |
| |
| //***************************************7 |
| // Set up the Sound System Configuration |
| //*************************************** |
| |
| // Set the 'Configuration Write Protect' register |
| // to 4281h. Allows vendor-defined configuration |
| // space between 0e4h and 0ffh to be written. |
| |
| writel(0x4281, card->pBA0 + BA0_CWPR); // (3e0h) |
| |
| // (0), Blast the clock control register to zero so that the |
| // PLL starts out in a known state, and blast the master serial |
| // port control register to zero so that the serial ports also |
| // start out in a known state. |
| |
| writel(0, card->pBA0 + BA0_CLKCR1); // (400h) |
| writel(0, card->pBA0 + BA0_SERMC); // (420h) |
| |
| |
| // (1), Make ESYN go to zero to turn off |
| // the Sync pulse on the AC97 link. |
| |
| writel(0, card->pBA0 + BA0_ACCTL); |
| udelay(50); |
| |
| |
| // (2) Drive the ARST# pin low for a minimum of 1uS (as defined in |
| // the AC97 spec) and then drive it high. This is done for non |
| // AC97 modes since there might be logic external to the CS461x |
| // that uses the ARST# line for a reset. |
| |
| writel(0, card->pBA0 + BA0_SPMC); // (3ech) |
| udelay(100); |
| writel(SPMC_RSTN, card->pBA0 + BA0_SPMC); |
| delayus(card,50000); // Wait 50 ms for ABITCLK to become stable. |
| |
| // (3) Turn on the Sound System Clocks. |
| writel(CLKCR1_PLLP, card->pBA0 + BA0_CLKCR1); // (400h) |
| delayus(card,50000); // Wait for the PLL to stabilize. |
| // Turn on clocking of the core (CLKCR1(400h) = 0x00000030) |
| writel(CLKCR1_PLLP | CLKCR1_SWCE, card->pBA0 + BA0_CLKCR1); |
| |
| // (4) Power on everything for now.. |
| writel(0x7E, card->pBA0 + BA0_SSPM); // (740h) |
| |
| // (5) Wait for clock stabilization. |
| for (temp1 = 0; temp1 < 1000; temp1++) { |
| udelay(1000); |
| if (readl(card->pBA0 + BA0_CLKCR1) & CLKCR1_DLLRDY) |
| break; |
| } |
| if (!(readl(card->pBA0 + BA0_CLKCR1) & CLKCR1_DLLRDY)) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: DLLRDY failed!\n")); |
| return -EIO; |
| } |
| // (6) Enable ASYNC generation. |
| writel(ACCTL_ESYN, card->pBA0 + BA0_ACCTL); // (460h) |
| |
| // Now wait 'for a short while' to allow the AC97 |
| // part to start generating bit clock. (so we don't |
| // Try to start the PLL without an input clock.) |
| delayus(card,50000); |
| |
| // Set the serial port timing configuration, so that the |
| // clock control circuit gets its clock from the right place. |
| writel(SERMC_PTC_AC97, card->pBA0 + BA0_SERMC); // (420h)=2. |
| |
| // (7) Wait for the codec ready signal from the AC97 codec. |
| |
| for (temp1 = 0; temp1 < 1000; temp1++) { |
| // Delay a mil to let things settle out and |
| // to prevent retrying the read too quickly. |
| udelay(1000); |
| if (readl(card->pBA0 + BA0_ACSTS) & ACSTS_CRDY) // If ready, (464h) |
| break; // exit the 'for' loop. |
| } |
| if (!(readl(card->pBA0 + BA0_ACSTS) & ACSTS_CRDY)) // If never came ready, |
| { |
| CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_ERR |
| "cs4281: ACSTS never came ready!\n")); |
| return -EIO; // exit initialization. |
| } |
| // (8) Assert the 'valid frame' signal so we can |
| // begin sending commands to the AC97 codec. |
| writel(ACCTL_VFRM | ACCTL_ESYN, card->pBA0 + BA0_ACCTL); // (460h) |
| |
| // (9), Wait until CODEC calibration is finished. |
| // Print an error message if it doesn't. |
| for (temp1 = 0; temp1 < 1000; temp1++) { |
| delayus(card,10000); |
| // Read the AC97 Powerdown Control/Status Register. |
| cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp2); |
| if ((temp2 & 0x0000000F) == 0x0000000F) |
| break; |
| } |
| if ((temp2 & 0x0000000F) != 0x0000000F) { |
| CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_ERR |
| "cs4281: Codec failed to calibrate. Status = %.8x.\n", |
| temp2)); |
| return -EIO; |
| } |
| // (10), Set the serial port timing configuration, so that the |
| // clock control circuit gets its clock from the right place. |
| writel(SERMC_PTC_AC97, card->pBA0 + BA0_SERMC); // (420h)=2. |
| |
| |
| // (11) Wait until we've sampled input slots 3 & 4 as valid, meaning |
| // that the codec is pumping ADC data across the AC link. |
| for (temp1 = 0; temp1 < 1000; temp1++) { |
| // Delay a mil to let things settle out and |
| // to prevent retrying the read too quickly. |
| delayus(card,1000); //(test) |
| |
| // Read the input slot valid register; See |
| // if input slots 3 and 4 are valid yet. |
| if ( |
| (readl(card->pBA0 + BA0_ACISV) & |
| (ACISV_ISV3 | ACISV_ISV4)) == |
| (ACISV_ISV3 | ACISV_ISV4)) break; // Exit the 'for' if slots are valid. |
| } |
| // If we never got valid data, exit initialization. |
| if ((readl(card->pBA0 + BA0_ACISV) & (ACISV_ISV3 | ACISV_ISV4)) |
| != (ACISV_ISV3 | ACISV_ISV4)) { |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_ERR |
| "cs4281: Never got valid data!\n")); |
| return -EIO; // If no valid data, exit initialization. |
| } |
| // (12), Start digital data transfer of audio data to the codec. |
| writel(ACOSV_SLV3 | ACOSV_SLV4, card->pBA0 + BA0_ACOSV); // (468h) |
| |
| |
| //************************************** |
| // Unmute the Master and Alternate |
| // (headphone) volumes. Set to max. |
| //************************************** |
| cs4281_write_ac97(card, BA0_AC97_HEADPHONE_VOLUME, 0); |
| cs4281_write_ac97(card, BA0_AC97_MASTER_VOLUME, 0); |
| |
| //****************************************** |
| // Power on the DAC(AddDACUser()from main()) |
| //****************************************** |
| cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1); |
| cs4281_write_ac97(card, BA0_AC97_POWERDOWN, temp1 &= 0xfdff); |
| |
| // Wait until we sample a DAC ready state. |
| for (temp2 = 0; temp2 < 32; temp2++) { |
| // Let's wait a mil to let things settle. |
| delayus(card,1000); |
| // Read the current state of the power control reg. |
| cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1); |
| // If the DAC ready state bit is set, stop waiting. |
| if (temp1 & 0x2) |
| break; |
| } |
| |
| //****************************************** |
| // Power on the ADC(AddADCUser()from main()) |
| //****************************************** |
| cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1); |
| cs4281_write_ac97(card, BA0_AC97_POWERDOWN, temp1 &= 0xfeff); |
| |
| // Wait until we sample ADC ready state. |
| for (temp2 = 0; temp2 < 32; temp2++) { |
| // Let's wait a mil to let things settle. |
| delayus(card,1000); |
| // Read the current state of the power control reg. |
| cs4281_read_ac97(card, BA0_AC97_POWERDOWN, &temp1); |
| // If the ADC ready state bit is set, stop waiting. |
| if (temp1 & 0x1) |
| break; |
| } |
| // Set up 4281 Register contents that |
| // don't change for boot duration. |
| |
| // For playback, we map AC97 slot 3 and 4(Left |
| // & Right PCM playback) to DMA Channel 0. |
| // Set the fifo to be 15 bytes at offset zero. |
| |
| ac97_slotid = 0x01000f00; // FCR0.RS[4:0]=1(=>slot4, right PCM playback). |
| // FCR0.LS[4:0]=0(=>slot3, left PCM playback). |
| // FCR0.SZ[6-0]=15; FCR0.OF[6-0]=0. |
| writel(ac97_slotid, card->pBA0 + BA0_FCR0); // (180h) |
| writel(ac97_slotid | FCRn_FEN, card->pBA0 + BA0_FCR0); // Turn on FIFO Enable. |
| |
| // For capture, we map AC97 slot 10 and 11(Left |
| // and Right PCM Record) to DMA Channel 1. |
| // Set the fifo to be 15 bytes at offset sixteen. |
| ac97_slotid = 0x0B0A0f10; // FCR1.RS[4:0]=11(=>slot11, right PCM record). |
| // FCR1.LS[4:0]=10(=>slot10, left PCM record). |
| // FCR1.SZ[6-0]=15; FCR1.OF[6-0]=16. |
| writel(ac97_slotid | FCRn_PSH, card->pBA0 + BA0_FCR1); // (184h) |
| writel(ac97_slotid | FCRn_FEN, card->pBA0 + BA0_FCR1); // Turn on FIFO Enable. |
| |
| // Map the Playback SRC to the same AC97 slots(3 & 4-- |
| // --Playback left & right)as DMA channel 0. |
| // Map the record SRC to the same AC97 slots(10 & 11-- |
| // -- Record left & right) as DMA channel 1. |
| |
| ac97_slotid = 0x0b0a0100; // SCRSA.PRSS[4:0]=1(=>slot4, right PCM playback). |
| // SCRSA.PLSS[4:0]=0(=>slot3, left PCM playback). |
| // SCRSA.CRSS[4:0]=11(=>slot11, right PCM record) |
| // SCRSA.CLSS[4:0]=10(=>slot10, left PCM record). |
| writel(ac97_slotid, card->pBA0 + BA0_SRCSA); // (75ch) |
| |
| // Set 'Half Terminal Count Interrupt Enable' and 'Terminal |
| // Count Interrupt Enable' in DMA Control Registers 0 & 1. |
| // Set 'MSK' flag to 1 to keep the DMA engines paused. |
| temp1 = (DCRn_HTCIE | DCRn_TCIE | DCRn_MSK); // (00030001h) |
| writel(temp1, card->pBA0 + BA0_DCR0); // (154h |
| writel(temp1, card->pBA0 + BA0_DCR1); // (15ch) |
| |
| // Set 'Auto-Initialize Control' to 'enabled'; For playback, |
| // set 'Transfer Type Control'(TR[1:0]) to 'read transfer', |
| // for record, set Transfer Type Control to 'write transfer'. |
| // All other bits set to zero; Some will be changed @ transfer start. |
| temp1 = (DMRn_DMA | DMRn_AUTO | DMRn_TR_READ); // (20000018h) |
| writel(temp1, card->pBA0 + BA0_DMR0); // (150h) |
| temp1 = (DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE); // (20000014h) |
| writel(temp1, card->pBA0 + BA0_DMR1); // (158h) |
| |
| // Enable DMA interrupts generally, and |
| // DMA0 & DMA1 interrupts specifically. |
| temp1 = readl(card->pBA0 + BA0_HIMR) & 0xfffbfcff; |
| writel(temp1, card->pBA0 + BA0_HIMR); |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: cs4281_hw_init()- 0\n")); |
| return 0; |
| } |
| |
| #ifndef NOT_CS4281_PM |
| static void printpm(struct cs4281_state *s) |
| { |
| CS_DBGOUT(CS_PM, 9, printk("pm struct:\n")); |
| CS_DBGOUT(CS_PM, 9, printk("flags:0x%x u32CLKCR1_SAVE: 0%x u32SSPMValue: 0x%x\n", |
| (unsigned)s->pm.flags,s->pm.u32CLKCR1_SAVE,s->pm.u32SSPMValue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32PPLVCvalue: 0x%x u32PPRVCvalue: 0x%x\n", |
| s->pm.u32PPLVCvalue,s->pm.u32PPRVCvalue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32FMLVCvalue: 0x%x u32FMRVCvalue: 0x%x\n", |
| s->pm.u32FMLVCvalue,s->pm.u32FMRVCvalue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32GPIORvalue: 0x%x u32JSCTLvalue: 0x%x\n", |
| s->pm.u32GPIORvalue,s->pm.u32JSCTLvalue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32SSCR: 0x%x u32SRCSA: 0x%x\n", |
| s->pm.u32SSCR,s->pm.u32SRCSA)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DacASR: 0x%x u32AdcASR: 0x%x\n", |
| s->pm.u32DacASR,s->pm.u32AdcASR)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DacSR: 0x%x u32AdcSR: 0x%x\n", |
| s->pm.u32DacSR,s->pm.u32AdcSR)); |
| CS_DBGOUT(CS_PM, 9, printk("u32MIDCR_Save: 0x%x\n", |
| s->pm.u32MIDCR_Save)); |
| |
| } |
| static void printpipe(struct cs4281_pipeline *pl) |
| { |
| |
| CS_DBGOUT(CS_PM, 9, printk("pm struct:\n")); |
| CS_DBGOUT(CS_PM, 9, printk("flags:0x%x number: 0%x\n", |
| (unsigned)pl->flags,pl->number)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DBAnValue: 0%x u32DBCnValue: 0x%x\n", |
| pl->u32DBAnValue,pl->u32DBCnValue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DMRnValue: 0x%x u32DCRnValue: 0x%x\n", |
| pl->u32DMRnValue,pl->u32DCRnValue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DBAnAddress: 0x%x u32DBCnAddress: 0x%x\n", |
| pl->u32DBAnAddress,pl->u32DBCnAddress)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DCAnAddress: 0x%x u32DCCnAddress: 0x%x\n", |
| pl->u32DCCnAddress,pl->u32DCCnAddress)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DMRnAddress: 0x%x u32DCRnAddress: 0x%x\n", |
| pl->u32DMRnAddress,pl->u32DCRnAddress)); |
| CS_DBGOUT(CS_PM, 9, printk("u32HDSRnAddress: 0x%x u32DBAn_Save: 0x%x\n", |
| pl->u32HDSRnAddress,pl->u32DBAn_Save)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DBCn_Save: 0x%x u32DMRn_Save: 0x%x\n", |
| pl->u32DBCn_Save,pl->u32DMRn_Save)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DCRn_Save: 0x%x u32DCCn_Save: 0x%x\n", |
| pl->u32DCRn_Save,pl->u32DCCn_Save)); |
| CS_DBGOUT(CS_PM, 9, printk("u32DCAn_Save: 0x%x\n", |
| pl->u32DCAn_Save)); |
| CS_DBGOUT(CS_PM, 9, printk("u32FCRn_Save: 0x%x u32FSICn_Save: 0x%x\n", |
| pl->u32FCRn_Save,pl->u32FSICn_Save)); |
| CS_DBGOUT(CS_PM, 9, printk("u32FCRnValue: 0x%x u32FSICnValue: 0x%x\n", |
| pl->u32FCRnValue,pl->u32FSICnValue)); |
| CS_DBGOUT(CS_PM, 9, printk("u32FCRnAddress: 0x%x u32FSICnAddress: 0x%x\n", |
| pl->u32FCRnAddress,pl->u32FSICnAddress)); |
| CS_DBGOUT(CS_PM, 9, printk("u32FPDRnValue: 0x%x u32FPDRnAddress: 0x%x\n", |
| pl->u32FPDRnValue,pl->u32FPDRnAddress)); |
| } |
| static void printpipelines(struct cs4281_state *s) |
| { |
| int i; |
| for(i=0;i<CS4281_NUMBER_OF_PIPELINES;i++) |
| { |
| if(s->pl[i].flags & CS4281_PIPELINE_VALID) |
| { |
| printpipe(&s->pl[i]); |
| } |
| } |
| } |
| /**************************************************************************** |
| * |
| * Suspend - save the ac97 regs, mute the outputs and power down the part. |
| * |
| ****************************************************************************/ |
| static void cs4281_ac97_suspend(struct cs4281_state *s) |
| { |
| int Count,i; |
| |
| CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_suspend()+\n")); |
| /* |
| * change the state, save the current hwptr, then stop the dac/adc |
| */ |
| s->pm.flags &= ~CS4281_PM_IDLE; |
| s->pm.flags |= CS4281_PM_SUSPENDING; |
| s->pm.u32hwptr_playback = readl(s->pBA0 + BA0_DCA0); |
| s->pm.u32hwptr_capture = readl(s->pBA0 + BA0_DCA1); |
| stop_dac(s); |
| stop_adc(s); |
| |
| for(Count = 0x2, i=0; (Count <= CS4281_AC97_HIGHESTREGTORESTORE) |
| && (i < CS4281_AC97_NUMBER_RESTORE_REGS); |
| Count += 2, i++) |
| { |
| cs4281_read_ac97(s, BA0_AC97_RESET + Count, &s->pm.ac97[i]); |
| } |
| /* |
| * Save the ac97 volume registers as well as the current powerdown state. |
| * Now, mute the all the outputs (master, headphone, and mono), as well |
| * as the PCM volume, in preparation for powering down the entire part. |
| */ |
| cs4281_read_ac97(s, BA0_AC97_MASTER_VOLUME, &s->pm.u32AC97_master_volume); |
| cs4281_read_ac97(s, BA0_AC97_HEADPHONE_VOLUME, &s->pm.u32AC97_headphone_volume); |
| cs4281_read_ac97(s, BA0_AC97_MASTER_VOLUME_MONO, &s->pm.u32AC97_master_volume_mono); |
| cs4281_read_ac97(s, BA0_AC97_PCM_OUT_VOLUME, &s->pm.u32AC97_pcm_out_volume); |
| |
| cs4281_write_ac97(s, BA0_AC97_MASTER_VOLUME, 0x8000); |
| cs4281_write_ac97(s, BA0_AC97_HEADPHONE_VOLUME, 0x8000); |
| cs4281_write_ac97(s, BA0_AC97_MASTER_VOLUME_MONO, 0x8000); |
| cs4281_write_ac97(s, BA0_AC97_PCM_OUT_VOLUME, 0x8000); |
| |
| cs4281_read_ac97(s, BA0_AC97_POWERDOWN, &s->pm.u32AC97_powerdown); |
| cs4281_read_ac97(s, BA0_AC97_GENERAL_PURPOSE, &s->pm.u32AC97_general_purpose); |
| |
| /* |
| * And power down everything on the AC97 codec. |
| */ |
| cs4281_write_ac97(s, BA0_AC97_POWERDOWN, 0xff00); |
| CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_suspend()-\n")); |
| } |
| |
| /**************************************************************************** |
| * |
| * Resume - power up the part and restore its registers.. |
| * |
| ****************************************************************************/ |
| static void cs4281_ac97_resume(struct cs4281_state *s) |
| { |
| int Count,i; |
| |
| CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_resume()+\n")); |
| |
| /* do not save the power state registers at this time |
| // |
| // If we saved away the power control registers, write them into the |
| // shadows so those saved values get restored instead of the current |
| // shadowed value. |
| // |
| if( bPowerStateSaved ) |
| { |
| PokeShadow( 0x26, ulSaveReg0x26 ); |
| bPowerStateSaved = FALSE; |
| } |
| */ |
| |
| // |
| // First, we restore the state of the general purpose register. This |
| // contains the mic select (mic1 or mic2) and if we restore this after |
| // we restore the mic volume/boost state and mic2 was selected at |
| // suspend time, we will end up with a brief period of time where mic1 |
| // is selected with the volume/boost settings for mic2, causing |
| // acoustic feedback. So we restore the general purpose register |
| // first, thereby getting the correct mic selected before we restore |
| // the mic volume/boost. |
| // |
| cs4281_write_ac97(s, BA0_AC97_GENERAL_PURPOSE, s->pm.u32AC97_general_purpose); |
| |
| // |
| // Now, while the outputs are still muted, restore the state of power |
| // on the AC97 part. |
| // |
| cs4281_write_ac97(s, BA0_AC97_POWERDOWN, s->pm.u32AC97_powerdown); |
| |
| /* |
| * Restore just the first set of registers, from register number |
| * 0x02 to the register number that ulHighestRegToRestore specifies. |
| */ |
| for( Count = 0x2, i=0; |
| (Count <= CS4281_AC97_HIGHESTREGTORESTORE) |
| && (i < CS4281_AC97_NUMBER_RESTORE_REGS); |
| Count += 2, i++) |
| { |
| cs4281_write_ac97(s, BA0_AC97_RESET + Count, s->pm.ac97[i]); |
| } |
| CS_DBGOUT(CS_PM, 9, printk("cs4281: cs4281_ac97_resume()-\n")); |
| } |
| |
| /* do not save the power state registers at this time |
| **************************************************************************** |
| * |
| * SavePowerState - Save the power registers away. |
| * |
| **************************************************************************** |
| void |
| HWAC97codec::SavePowerState(void) |
| { |
| ENTRY(TM_OBJECTCALLS, "HWAC97codec::SavePowerState()\r\n"); |
| |
| ulSaveReg0x26 = PeekShadow(0x26); |
| |
| // |
| // Note that we have saved registers that need to be restored during a |
| // resume instead of ulAC97Regs[]. |
| // |
| bPowerStateSaved = TRUE; |
| |
| } // SavePowerState |
| */ |
| |
| static void cs4281_SuspendFIFO(struct cs4281_state *s, struct cs4281_pipeline *pl) |
| { |
| /* |
| * We need to save the contents of the BASIC FIFO Registers. |
| */ |
| pl->u32FCRn_Save = readl(s->pBA0 + pl->u32FCRnAddress); |
| pl->u32FSICn_Save = readl(s->pBA0 + pl->u32FSICnAddress); |
| } |
| static void cs4281_ResumeFIFO(struct cs4281_state *s, struct cs4281_pipeline *pl) |
| { |
| /* |
| * We need to restore the contents of the BASIC FIFO Registers. |
| */ |
| writel(pl->u32FCRn_Save,s->pBA0 + pl->u32FCRnAddress); |
| writel(pl->u32FSICn_Save,s->pBA0 + pl->u32FSICnAddress); |
| } |
| static void cs4281_SuspendDMAengine(struct cs4281_state *s, struct cs4281_pipeline *pl) |
| { |
| // |
| // We need to save the contents of the BASIC DMA Registers. |
| // |
| pl->u32DBAn_Save = readl(s->pBA0 + pl->u32DBAnAddress); |
| pl->u32DBCn_Save = readl(s->pBA0 + pl->u32DBCnAddress); |
| pl->u32DMRn_Save = readl(s->pBA0 + pl->u32DMRnAddress); |
| pl->u32DCRn_Save = readl(s->pBA0 + pl->u32DCRnAddress); |
| pl->u32DCCn_Save = readl(s->pBA0 + pl->u32DCCnAddress); |
| pl->u32DCAn_Save = readl(s->pBA0 + pl->u32DCAnAddress); |
| } |
| static void cs4281_ResumeDMAengine(struct cs4281_state *s, struct cs4281_pipeline *pl) |
| { |
| // |
| // We need to save the contents of the BASIC DMA Registers. |
| // |
| writel( pl->u32DBAn_Save, s->pBA0 + pl->u32DBAnAddress); |
| writel( pl->u32DBCn_Save, s->pBA0 + pl->u32DBCnAddress); |
| writel( pl->u32DMRn_Save, s->pBA0 + pl->u32DMRnAddress); |
| writel( pl->u32DCRn_Save, s->pBA0 + pl->u32DCRnAddress); |
| writel( pl->u32DCCn_Save, s->pBA0 + pl->u32DCCnAddress); |
| writel( pl->u32DCAn_Save, s->pBA0 + pl->u32DCAnAddress); |
| } |
| |
| static int cs4281_suspend(struct cs4281_state *s) |
| { |
| int i; |
| u32 u32CLKCR1; |
| struct cs4281_pm *pm = &s->pm; |
| CS_DBGOUT(CS_PM | CS_FUNCTION, 9, |
| printk("cs4281: cs4281_suspend()+ flags=%d\n", |
| (unsigned)s->pm.flags)); |
| /* |
| * check the current state, only suspend if IDLE |
| */ |
| if(!(s->pm.flags & CS4281_PM_IDLE)) |
| { |
| CS_DBGOUT(CS_PM | CS_ERROR, 2, |
| printk("cs4281: cs4281_suspend() unable to suspend, not IDLE\n")); |
| return 1; |
| } |
| s->pm.flags &= ~CS4281_PM_IDLE; |
| s->pm.flags |= CS4281_PM_SUSPENDING; |
| |
| // |
| // Gershwin CLKRUN - Set CKRA |
| // |
| u32CLKCR1 = readl(s->pBA0 + BA0_CLKCR1); |
| |
| pm->u32CLKCR1_SAVE = u32CLKCR1; |
| if(!(u32CLKCR1 & 0x00010000 ) ) |
| writel(u32CLKCR1 | 0x00010000, s->pBA0 + BA0_CLKCR1); |
| |
| // |
| // First, turn on the clocks (yikes) to the devices, so that they will |
| // respond when we try to save their state. |
| // |
| if(!(u32CLKCR1 & CLKCR1_SWCE)) |
| { |
| writel(u32CLKCR1 | CLKCR1_SWCE , s->pBA0 + BA0_CLKCR1); |
| } |
| |
| // |
| // Save the power state |
| // |
| pm->u32SSPMValue = readl(s->pBA0 + BA0_SSPM); |
| |
| // |
| // Disable interrupts. |
| // |
| writel(HICR_CHGM, s->pBA0 + BA0_HICR); |
| |
| // |
| // Save the PCM Playback Left and Right Volume Control. |
| // |
| pm->u32PPLVCvalue = readl(s->pBA0 + BA0_PPLVC); |
| pm->u32PPRVCvalue = readl(s->pBA0 + BA0_PPRVC); |
| |
| // |
| // Save the FM Synthesis Left and Right Volume Control. |
| // |
| pm->u32FMLVCvalue = readl(s->pBA0 + BA0_FMLVC); |
| pm->u32FMRVCvalue = readl(s->pBA0 + BA0_FMRVC); |
| |
| // |
| // Save the GPIOR value. |
| // |
| pm->u32GPIORvalue = readl(s->pBA0 + BA0_GPIOR); |
| |
| // |
| // Save the JSCTL value. |
| // |
| pm->u32JSCTLvalue = readl(s->pBA0 + BA0_GPIOR); |
| |
| // |
| // Save Sound System Control Register |
| // |
| pm->u32SSCR = readl(s->pBA0 + BA0_SSCR); |
| |
| // |
| // Save SRC Slot Assinment register |
| // |
| pm->u32SRCSA = readl(s->pBA0 + BA0_SRCSA); |
| |
| // |
| // Save sample rate |
| // |
| pm->u32DacASR = readl(s->pBA0 + BA0_PASR); |
| pm->u32AdcASR = readl(s->pBA0 + BA0_CASR); |
| pm->u32DacSR = readl(s->pBA0 + BA0_DACSR); |
| pm->u32AdcSR = readl(s->pBA0 + BA0_ADCSR); |
| |
| // |
| // Loop through all of the PipeLines |
| // |
| for(i = 0; i < CS4281_NUMBER_OF_PIPELINES; i++) |
| { |
| if(s->pl[i].flags & CS4281_PIPELINE_VALID) |
| { |
| // |
| // Ask the DMAengines and FIFOs to Suspend. |
| // |
| cs4281_SuspendDMAengine(s,&s->pl[i]); |
| cs4281_SuspendFIFO(s,&s->pl[i]); |
| } |
| } |
| // |
| // We need to save the contents of the Midi Control Register. |
| // |
| pm->u32MIDCR_Save = readl(s->pBA0 + BA0_MIDCR); |
| /* |
| * save off the AC97 part information |
| */ |
| cs4281_ac97_suspend(s); |
| |
| // |
| // Turn off the serial ports. |
| // |
| writel(0, s->pBA0 + BA0_SERMC); |
| |
| // |
| // Power off FM, Joystick, AC link, |
| // |
| writel(0, s->pBA0 + BA0_SSPM); |
| |
| // |
| // DLL off. |
| // |
| writel(0, s->pBA0 + BA0_CLKCR1); |
| |
| // |
| // AC link off. |
| // |
| writel(0, s->pBA0 + BA0_SPMC); |
| |
| // |
| // Put the chip into D3(hot) state. |
| // |
| // PokeBA0(BA0_PMCS, 0x00000003); |
| |
| // |
| // Gershwin CLKRUN - Clear CKRA |
| // |
| u32CLKCR1 = readl(s->pBA0 + BA0_CLKCR1); |
| writel(u32CLKCR1 & 0xFFFEFFFF, s->pBA0 + BA0_CLKCR1); |
| |
| #ifdef CSDEBUG |
| printpm(s); |
| printpipelines(s); |
| #endif |
| |
| s->pm.flags &= ~CS4281_PM_SUSPENDING; |
| s->pm.flags |= CS4281_PM_SUSPENDED; |
| |
| CS_DBGOUT(CS_PM | CS_FUNCTION, 9, |
| printk("cs4281: cs4281_suspend()- flags=%d\n", |
| (unsigned)s->pm.flags)); |
| return 0; |
| } |
| |
| static int cs4281_resume(struct cs4281_state *s) |
| { |
| int i; |
| unsigned temp1; |
| u32 u32CLKCR1; |
| struct cs4281_pm *pm = &s->pm; |
| CS_DBGOUT(CS_PM | CS_FUNCTION, 4, |
| printk( "cs4281: cs4281_resume()+ flags=%d\n", |
| (unsigned)s->pm.flags)); |
| if(!(s->pm.flags & CS4281_PM_SUSPENDED)) |
| { |
| CS_DBGOUT(CS_PM | CS_ERROR, 2, |
| printk("cs4281: cs4281_resume() unable to resume, not SUSPENDED\n")); |
| return 1; |
| } |
| s->pm.flags &= ~CS4281_PM_SUSPENDED; |
| s->pm.flags |= CS4281_PM_RESUMING; |
| |
| // |
| // Gershwin CLKRUN - Set CKRA |
| // |
| u32CLKCR1 = readl(s->pBA0 + BA0_CLKCR1); |
| writel(u32CLKCR1 | 0x00010000, s->pBA0 + BA0_CLKCR1); |
| |
| // |
| // set the power state. |
| // |
| //old PokeBA0(BA0_PMCS, 0); |
| |
| // |
| // Program the clock circuit and serial ports. |
| // |
| temp1 = cs4281_hw_init(s); |
| if (temp1) { |
| CS_DBGOUT(CS_ERROR | CS_INIT, 1, |
| printk(KERN_ERR |
| "cs4281: resume cs4281_hw_init() error.\n")); |
| return -1; |
| } |
| |
| // |
| // restore the Power state |
| // |
| writel(pm->u32SSPMValue, s->pBA0 + BA0_SSPM); |
| |
| // |
| // Set post SRC mix setting (FM or ALT48K) |
| // |
| writel(pm->u32SSPM_BITS, s->pBA0 + BA0_SSPM); |
| |
| // |
| // Loop through all of the PipeLines |
| // |
| for(i = 0; i < CS4281_NUMBER_OF_PIPELINES; i++) |
| { |
| if(s->pl[i].flags & CS4281_PIPELINE_VALID) |
| { |
| // |
| // Ask the DMAengines and FIFOs to Resume. |
| // |
| cs4281_ResumeDMAengine(s,&s->pl[i]); |
| cs4281_ResumeFIFO(s,&s->pl[i]); |
| } |
| } |
| // |
| // We need to restore the contents of the Midi Control Register. |
| // |
| writel(pm->u32MIDCR_Save, s->pBA0 + BA0_MIDCR); |
| |
| cs4281_ac97_resume(s); |
| // |
| // Restore the PCM Playback Left and Right Volume Control. |
| // |
| writel(pm->u32PPLVCvalue, s->pBA0 + BA0_PPLVC); |
| writel(pm->u32PPRVCvalue, s->pBA0 + BA0_PPRVC); |
| |
| // |
| // Restore the FM Synthesis Left and Right Volume Control. |
| // |
| writel(pm->u32FMLVCvalue, s->pBA0 + BA0_FMLVC); |
| writel(pm->u32FMRVCvalue, s->pBA0 + BA0_FMRVC); |
| |
| // |
| // Restore the JSCTL value. |
| // |
| writel(pm->u32JSCTLvalue, s->pBA0 + BA0_JSCTL); |
| |
| // |
| // Restore the GPIOR register value. |
| // |
| writel(pm->u32GPIORvalue, s->pBA0 + BA0_GPIOR); |
| |
| // |
| // Restore Sound System Control Register |
| // |
| writel(pm->u32SSCR, s->pBA0 + BA0_SSCR); |
| |
| // |
| // Restore SRC Slot Assignment register |
| // |
| writel(pm->u32SRCSA, s->pBA0 + BA0_SRCSA); |
| |
| // |
| // Restore sample rate |
| // |
| writel(pm->u32DacASR, s->pBA0 + BA0_PASR); |
| writel(pm->u32AdcASR, s->pBA0 + BA0_CASR); |
| writel(pm->u32DacSR, s->pBA0 + BA0_DACSR); |
| writel(pm->u32AdcSR, s->pBA0 + BA0_ADCSR); |
| |
| // |
| // Restore CFL1/2 registers we saved to compensate for OEM bugs. |
| // |
| // PokeBA0(BA0_CFLR, ulConfig); |
| |
| // |
| // Gershwin CLKRUN - Clear CKRA |
| // |
| writel(pm->u32CLKCR1_SAVE, s->pBA0 + BA0_CLKCR1); |
| |
| // |
| // Enable interrupts on the part. |
| // |
| writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); |
| |
| #ifdef CSDEBUG |
| printpm(s); |
| printpipelines(s); |
| #endif |
| /* |
| * change the state, restore the current hwptrs, then stop the dac/adc |
| */ |
| s->pm.flags |= CS4281_PM_IDLE; |
| s->pm.flags &= ~(CS4281_PM_SUSPENDING | CS4281_PM_SUSPENDED |
| | CS4281_PM_RESUMING | CS4281_PM_RESUMED); |
| |
| writel(s->pm.u32hwptr_playback, s->pBA0 + BA0_DCA0); |
| writel(s->pm.u32hwptr_capture, s->pBA0 + BA0_DCA1); |
| start_dac(s); |
| start_adc(s); |
| |
| CS_DBGOUT(CS_PM | CS_FUNCTION, 9, printk("cs4281: cs4281_resume()- flags=%d\n", |
| (unsigned)s->pm.flags)); |
| return 0; |
| } |
| |
| #endif |
| |
| //****************************************************************************** |
| // "cs4281_play_rate()" -- |
| //****************************************************************************** |
| static void cs4281_play_rate(struct cs4281_state *card, u32 playrate) |
| { |
| u32 DACSRvalue = 1; |
| |
| // Based on the sample rate, program the DACSR register. |
| if (playrate == 8000) |
| DACSRvalue = 5; |
| if (playrate == 11025) |
| DACSRvalue = 4; |
| else if (playrate == 22050) |
| DACSRvalue = 2; |
| else if (playrate == 44100) |
| DACSRvalue = 1; |
| else if ((playrate <= 48000) && (playrate >= 6023)) |
| DACSRvalue = 24576000 / (playrate * 16); |
| else if (playrate < 6023) |
| // Not allowed by open. |
| return; |
| else if (playrate > 48000) |
| // Not allowed by open. |
| return; |
| CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 2, printk(KERN_INFO |
| "cs4281: cs4281_play_rate(): DACSRvalue=0x%.8x playrate=%d\n", |
| DACSRvalue, playrate)); |
| // Write the 'sample rate select code' |
| // to the 'DAC Sample Rate' register. |
| writel(DACSRvalue, card->pBA0 + BA0_DACSR); // (744h) |
| } |
| |
| //****************************************************************************** |
| // "cs4281_record_rate()" -- Initialize the record sample rate converter. |
| //****************************************************************************** |
| static void cs4281_record_rate(struct cs4281_state *card, u32 outrate) |
| { |
| u32 ADCSRvalue = 1; |
| |
| // |
| // Based on the sample rate, program the ADCSR register |
| // |
| if (outrate == 8000) |
| ADCSRvalue = 5; |
| if (outrate == 11025) |
| ADCSRvalue = 4; |
| else if (outrate == 22050) |
| ADCSRvalue = 2; |
| else if (outrate == 44100) |
| ADCSRvalue = 1; |
| else if ((outrate <= 48000) && (outrate >= 6023)) |
| ADCSRvalue = 24576000 / (outrate * 16); |
| else if (outrate < 6023) { |
| // Not allowed by open. |
| return; |
| } else if (outrate > 48000) { |
| // Not allowed by open. |
| return; |
| } |
| CS_DBGOUT(CS_WAVE_READ | CS_PARMS, 2, printk(KERN_INFO |
| "cs4281: cs4281_record_rate(): ADCSRvalue=0x%.8x outrate=%d\n", |
| ADCSRvalue, outrate)); |
| // Write the 'sample rate select code |
| // to the 'ADC Sample Rate' register. |
| writel(ADCSRvalue, card->pBA0 + BA0_ADCSR); // (748h) |
| } |
| |
| |
| |
| static void stop_dac(struct cs4281_state *s) |
| { |
| unsigned long flags; |
| unsigned temp1; |
| |
| CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO "cs4281: stop_dac():\n")); |
| spin_lock_irqsave(&s->lock, flags); |
| s->ena &= ~FMODE_WRITE; |
| temp1 = readl(s->pBA0 + BA0_DCR0) | DCRn_MSK; |
| writel(temp1, s->pBA0 + BA0_DCR0); |
| |
| spin_unlock_irqrestore(&s->lock, flags); |
| } |
| |
| |
| static void start_dac(struct cs4281_state *s) |
| { |
| unsigned long flags; |
| unsigned temp1; |
| |
| CS_DBGOUT(CS_FUNCTION, 3, printk(KERN_INFO "cs4281: start_dac()+\n")); |
| spin_lock_irqsave(&s->lock, flags); |
| if (!(s->ena & FMODE_WRITE) && (s->dma_dac.mapped || |
| (s->dma_dac.count > 0 |
| && s->dma_dac.ready)) |
| #ifndef NOT_CS4281_PM |
| && (s->pm.flags & CS4281_PM_IDLE)) |
| #else |
| ) |
| #endif |
| { |
| s->ena |= FMODE_WRITE; |
| temp1 = readl(s->pBA0 + BA0_DCR0) & ~DCRn_MSK; // Clear DMA0 channel mask. |
| writel(temp1, s->pBA0 + BA0_DCR0); // Start DMA'ing. |
| writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Enable interrupts. |
| |
| writel(7, s->pBA0 + BA0_PPRVC); |
| writel(7, s->pBA0 + BA0_PPLVC); |
| CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 8, printk(KERN_INFO |
| "cs4281: start_dac(): writel 0x%x start dma\n", temp1)); |
| |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| CS_DBGOUT(CS_FUNCTION, 3, |
| printk(KERN_INFO "cs4281: start_dac()-\n")); |
| } |
| |
| |
| static void stop_adc(struct cs4281_state *s) |
| { |
| unsigned long flags; |
| unsigned temp1; |
| |
| CS_DBGOUT(CS_FUNCTION, 3, |
| printk(KERN_INFO "cs4281: stop_adc()+\n")); |
| |
| spin_lock_irqsave(&s->lock, flags); |
| s->ena &= ~FMODE_READ; |
| |
| if (s->conversion == 1) { |
| s->conversion = 0; |
| s->prop_adc.fmt = s->prop_adc.fmt_original; |
| } |
| temp1 = readl(s->pBA0 + BA0_DCR1) | DCRn_MSK; |
| writel(temp1, s->pBA0 + BA0_DCR1); |
| spin_unlock_irqrestore(&s->lock, flags); |
| CS_DBGOUT(CS_FUNCTION, 3, |
| printk(KERN_INFO "cs4281: stop_adc()-\n")); |
| } |
| |
| |
| static void start_adc(struct cs4281_state *s) |
| { |
| unsigned long flags; |
| unsigned temp1; |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: start_adc()+\n")); |
| |
| if (!(s->ena & FMODE_READ) && |
| (s->dma_adc.mapped || s->dma_adc.count <= |
| (signed) (s->dma_adc.dmasize - 2 * s->dma_adc.fragsize)) |
| && s->dma_adc.ready |
| #ifndef NOT_CS4281_PM |
| && (s->pm.flags & CS4281_PM_IDLE)) |
| #else |
| ) |
| #endif |
| { |
| if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) { |
| // |
| // now only use 16 bit capture, due to truncation issue |
| // in the chip, noticable distortion occurs. |
| // allocate buffer and then convert from 16 bit to |
| // 8 bit for the user buffer. |
| // |
| s->prop_adc.fmt_original = s->prop_adc.fmt; |
| if (s->prop_adc.fmt & AFMT_S8) { |
| s->prop_adc.fmt &= ~AFMT_S8; |
| s->prop_adc.fmt |= AFMT_S16_LE; |
| } |
| if (s->prop_adc.fmt & AFMT_U8) { |
| s->prop_adc.fmt &= ~AFMT_U8; |
| s->prop_adc.fmt |= AFMT_U16_LE; |
| } |
| // |
| // prog_dmabuf_adc performs a stop_adc() but that is |
| // ok since we really haven't started the DMA yet. |
| // |
| prog_codec(s, CS_TYPE_ADC); |
| |
| if (prog_dmabuf_adc(s) != 0) { |
| CS_DBGOUT(CS_ERROR, 2, printk(KERN_INFO |
| "cs4281: start_adc(): error in prog_dmabuf_adc\n")); |
| } |
| s->conversion = 1; |
| } |
| spin_lock_irqsave(&s->lock, flags); |
| s->ena |= FMODE_READ; |
| temp1 = readl(s->pBA0 + BA0_DCR1) & ~DCRn_MSK; // Clear DMA1 channel mask bit. |
| writel(temp1, s->pBA0 + BA0_DCR1); // Start recording |
| writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Enable interrupts. |
| spin_unlock_irqrestore(&s->lock, flags); |
| |
| CS_DBGOUT(CS_PARMS, 6, printk(KERN_INFO |
| "cs4281: start_adc(): writel 0x%x \n", temp1)); |
| } |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: start_adc()-\n")); |
| |
| } |
| |
| |
| // --------------------------------------------------------------------- |
| |
| #define DMABUF_MINORDER 1 // ==> min buffer size = 8K. |
| |
| |
| static void dealloc_dmabuf(struct cs4281_state *s, struct dmabuf *db) |
| { |
| struct page *map, *mapend; |
| |
| if (db->rawbuf) { |
| // Undo prog_dmabuf()'s marking the pages as reserved |
| mapend = |
| virt_to_page(db->rawbuf + (PAGE_SIZE << db->buforder) - |
| 1); |
| for (map = virt_to_page(db->rawbuf); map <= mapend; map++) |
| ClearPageReserved(map); |
| free_dmabuf(s, db); |
| } |
| if (s->tmpbuff && (db->type == CS_TYPE_ADC)) { |
| // Undo prog_dmabuf()'s marking the pages as reserved |
| mapend = |
| virt_to_page(s->tmpbuff + |
| (PAGE_SIZE << s->buforder_tmpbuff) - 1); |
| for (map = virt_to_page(s->tmpbuff); map <= mapend; map++) |
| ClearPageReserved(map); |
| free_dmabuf2(s, db); |
| } |
| s->tmpbuff = NULL; |
| db->rawbuf = NULL; |
| db->mapped = db->ready = 0; |
| } |
| |
| static int prog_dmabuf(struct cs4281_state *s, struct dmabuf *db) |
| { |
| int order; |
| unsigned bytespersec, temp1; |
| unsigned bufs, sample_shift = 0; |
| struct page *map, *mapend; |
| unsigned long df; |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: prog_dmabuf()+\n")); |
| db->hwptr = db->swptr = db->total_bytes = db->count = db->error = |
| db->endcleared = db->blocks = db->wakeup = db->underrun = 0; |
| /* |
| * check for order within limits, but do not overwrite value, check |
| * later for a fractional defaultorder (i.e. 100+). |
| */ |
| if((defaultorder > 0) && (defaultorder < 12)) |
| df = defaultorder; |
| else |
| df = 1; |
| |
| if (!db->rawbuf) { |
| db->ready = db->mapped = 0; |
| for (order = df; order >= DMABUF_MINORDER; order--) |
| if ( (db->rawbuf = (void *) pci_alloc_consistent( |
| s->pcidev, PAGE_SIZE << order, &db-> dmaaddr))) |
| break; |
| if (!db->rawbuf) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: prog_dmabuf(): unable to allocate rawbuf\n")); |
| return -ENOMEM; |
| } |
| db->buforder = order; |
| // Now mark the pages as reserved; otherwise the |
| // remap_pfn_range() in cs4281_mmap doesn't work. |
| // 1. get index to last page in mem_map array for rawbuf. |
| mapend = virt_to_page(db->rawbuf + |
| (PAGE_SIZE << db->buforder) - 1); |
| |
| // 2. mark each physical page in range as 'reserved'. |
| for (map = virt_to_page(db->rawbuf); map <= mapend; map++) |
| SetPageReserved(map); |
| } |
| if (!s->tmpbuff && (db->type == CS_TYPE_ADC)) { |
| for (order = df; order >= DMABUF_MINORDER; |
| order--) |
| if ( (s->tmpbuff = (void *) pci_alloc_consistent( |
| s->pcidev, PAGE_SIZE << order, |
| &s->dmaaddr_tmpbuff))) |
| break; |
| if (!s->tmpbuff) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: prog_dmabuf(): unable to allocate tmpbuff\n")); |
| return -ENOMEM; |
| } |
| s->buforder_tmpbuff = order; |
| // Now mark the pages as reserved; otherwise the |
| // remap_pfn_range() in cs4281_mmap doesn't work. |
| // 1. get index to last page in mem_map array for rawbuf. |
| mapend = virt_to_page(s->tmpbuff + |
| (PAGE_SIZE << s->buforder_tmpbuff) - 1); |
| |
| // 2. mark each physical page in range as 'reserved'. |
| for (map = virt_to_page(s->tmpbuff); map <= mapend; map++) |
| SetPageReserved(map); |
| } |
| if (db->type == CS_TYPE_DAC) { |
| if (s->prop_dac.fmt & (AFMT_S16_LE | AFMT_U16_LE)) |
| sample_shift++; |
| if (s->prop_dac.channels > 1) |
| sample_shift++; |
| bytespersec = s->prop_dac.rate << sample_shift; |
| } else // CS_TYPE_ADC |
| { |
| if (s->prop_adc.fmt & (AFMT_S16_LE | AFMT_U16_LE)) |
| sample_shift++; |
| if (s->prop_adc.channels > 1) |
| sample_shift++; |
| bytespersec = s->prop_adc.rate << sample_shift; |
| } |
| bufs = PAGE_SIZE << db->buforder; |
| |
| /* |
| * added fractional "defaultorder" inputs. if >100 then use |
| * defaultorder-100 as power of 2 for the buffer size. example: |
| * 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size. |
| */ |
| if(defaultorder >= 100) |
| { |
| bufs = 1 << (defaultorder-100); |
| } |
| |
| #define INTERRUPT_RATE_MS 100 // Interrupt rate in milliseconds. |
| db->numfrag = 2; |
| /* |
| * Nominal frag size(bytes/interrupt) |
| */ |
| temp1 = bytespersec / (1000 / INTERRUPT_RATE_MS); |
| db->fragshift = 8; // Min 256 bytes. |
| while (1 << db->fragshift < temp1) // Calc power of 2 frag size. |
| db->fragshift += 1; |
| db->fragsize = 1 << db->fragshift; |
| db->dmasize = db->fragsize * 2; |
| db->fragsamples = db->fragsize >> sample_shift; // # samples/fragment. |
| |
| // If the calculated size is larger than the allocated |
| // buffer, divide the allocated buffer into 2 fragments. |
| if (db->dmasize > bufs) { |
| |
| db->numfrag = 2; // Two fragments. |
| db->fragsize = bufs >> 1; // Each 1/2 the alloc'ed buffer. |
| db->fragsamples = db->fragsize >> sample_shift; // # samples/fragment. |
| db->dmasize = bufs; // Use all the alloc'ed buffer. |
| |
| db->fragshift = 0; // Calculate 'fragshift'. |
| temp1 = db->fragsize; // update_ptr() uses it |
| while ((temp1 >>= 1) > 1) // to calc 'total-bytes' |
| db->fragshift += 1; // returned in DSP_GETI/OPTR. |
| } |
| CS_DBGOUT(CS_PARMS, 3, printk(KERN_INFO |
| "cs4281: prog_dmabuf(): numfrag=%d fragsize=%d fragsamples=%d fragshift=%d bufs=%d fmt=0x%x ch=%d\n", |
| db->numfrag, db->fragsize, db->fragsamples, |
| db->fragshift, bufs, |
| (db->type == CS_TYPE_DAC) ? s->prop_dac.fmt : |
| s->prop_adc.fmt, |
| (db->type == CS_TYPE_DAC) ? s->prop_dac.channels : |
| s->prop_adc.channels)); |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: prog_dmabuf()-\n")); |
| return 0; |
| } |
| |
| |
| static int prog_dmabuf_adc(struct cs4281_state *s) |
| { |
| unsigned long va; |
| unsigned count; |
| int c; |
| stop_adc(s); |
| s->dma_adc.type = CS_TYPE_ADC; |
| if ((c = prog_dmabuf(s, &s->dma_adc))) |
| return c; |
| |
| if (s->dma_adc.rawbuf) { |
| memset(s->dma_adc.rawbuf, |
| (s->prop_adc. |
| fmt & (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0, |
| s->dma_adc.dmasize); |
| } |
| if (s->tmpbuff) { |
| memset(s->tmpbuff, |
| (s->prop_adc. |
| fmt & (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0, |
| PAGE_SIZE << s->buforder_tmpbuff); |
| } |
| |
| va = virt_to_bus(s->dma_adc.rawbuf); |
| |
| count = s->dma_adc.dmasize; |
| |
| if (s->prop_adc. |
| fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE)) |
| count /= 2; // 16-bit. |
| |
| if (s->prop_adc.channels > 1) |
| count /= 2; // Assume stereo. |
| |
| CS_DBGOUT(CS_WAVE_READ, 3, printk(KERN_INFO |
| "cs4281: prog_dmabuf_adc(): count=%d va=0x%.8x\n", |
| count, (unsigned) va)); |
| |
| writel(va, s->pBA0 + BA0_DBA1); // Set buffer start address. |
| writel(count - 1, s->pBA0 + BA0_DBC1); // Set count. |
| s->dma_adc.ready = 1; |
| return 0; |
| } |
| |
| |
| static int prog_dmabuf_dac(struct cs4281_state *s) |
| { |
| unsigned long va; |
| unsigned count; |
| int c; |
| stop_dac(s); |
| s->dma_dac.type = CS_TYPE_DAC; |
| if ((c = prog_dmabuf(s, &s->dma_dac))) |
| return c; |
| memset(s->dma_dac.rawbuf, |
| (s->prop_dac.fmt & (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0, |
| s->dma_dac.dmasize); |
| |
| va = virt_to_bus(s->dma_dac.rawbuf); |
| |
| count = s->dma_dac.dmasize; |
| if (s->prop_dac. |
| fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE)) |
| count /= 2; // 16-bit. |
| |
| if (s->prop_dac.channels > 1) |
| count /= 2; // Assume stereo. |
| |
| writel(va, s->pBA0 + BA0_DBA0); // Set buffer start address. |
| writel(count - 1, s->pBA0 + BA0_DBC0); // Set count. |
| |
| CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO |
| "cs4281: prog_dmabuf_dac(): count=%d va=0x%.8x\n", |
| count, (unsigned) va)); |
| |
| s->dma_dac.ready = 1; |
| return 0; |
| } |
| |
| |
| static void clear_advance(void *buf, unsigned bsize, unsigned bptr, |
| unsigned len, unsigned char c) |
| { |
| if (bptr + len > bsize) { |
| unsigned x = bsize - bptr; |
| memset(((char *) buf) + bptr, c, x); |
| bptr = 0; |
| len -= x; |
| } |
| CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO |
| "cs4281: clear_advance(): memset %d at %p for %d size \n", |
| (unsigned)c, ((char *) buf) + bptr, len)); |
| memset(((char *) buf) + bptr, c, len); |
| } |
| |
| |
| |
| // call with spinlock held! |
| static void cs4281_update_ptr(struct cs4281_state *s, int intflag) |
| { |
| int diff; |
| unsigned hwptr, va; |
| |
| // update ADC pointer |
| if (s->ena & FMODE_READ) { |
| hwptr = readl(s->pBA0 + BA0_DCA1); // Read capture DMA address. |
| va = virt_to_bus(s->dma_adc.rawbuf); |
| hwptr -= (unsigned) va; |
| diff = |
| (s->dma_adc.dmasize + hwptr - |
| s->dma_adc.hwptr) % s->dma_adc.dmasize; |
| s->dma_adc.hwptr = hwptr; |
| s->dma_adc.total_bytes += diff; |
| s->dma_adc.count += diff; |
| if (s->dma_adc.count > s->dma_adc.dmasize) |
| s->dma_adc.count = s->dma_adc.dmasize; |
| if (s->dma_adc.mapped) { |
| if (s->dma_adc.count >= |
| (signed) s->dma_adc.fragsize) wake_up(&s-> |
| dma_adc. |
| wait); |
| } else { |
| if (s->dma_adc.count > 0) |
| wake_up(&s->dma_adc.wait); |
| } |
| CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO |
| "cs4281: cs4281_update_ptr(): s=%p hwptr=%d total_bytes=%d count=%d \n", |
| s, s->dma_adc.hwptr, s->dma_adc.total_bytes, s->dma_adc.count)); |
| } |
| // update DAC pointer |
| // |
| // check for end of buffer, means that we are going to wait for another interrupt |
| // to allow silence to fill the fifos on the part, to keep pops down to a minimum. |
| // |
| if (s->ena & FMODE_WRITE) { |
| hwptr = readl(s->pBA0 + BA0_DCA0); // Read play DMA address. |
| va = virt_to_bus(s->dma_dac.rawbuf); |
| hwptr -= (unsigned) va; |
| diff = (s->dma_dac.dmasize + hwptr - |
| s->dma_dac.hwptr) % s->dma_dac.dmasize; |
| s->dma_dac.hwptr = hwptr; |
| s->dma_dac.total_bytes += diff; |
| if (s->dma_dac.mapped) { |
| s->dma_dac.count += diff; |
| if (s->dma_dac.count >= s->dma_dac.fragsize) { |
| s->dma_dac.wakeup = 1; |
| wake_up(&s->dma_dac.wait); |
| if (s->dma_dac.count > s->dma_dac.dmasize) |
| s->dma_dac.count &= |
| s->dma_dac.dmasize - 1; |
| } |
| } else { |
| s->dma_dac.count -= diff; |
| if (s->dma_dac.count <= 0) { |
| // |
| // fill with silence, and do not shut down the DAC. |
| // Continue to play silence until the _release. |
| // |
| CS_DBGOUT(CS_WAVE_WRITE, 6, printk(KERN_INFO |
| "cs4281: cs4281_update_ptr(): memset %d at %p for %d size \n", |
| (unsigned)(s->prop_dac.fmt & |
| (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0, |
| s->dma_dac.rawbuf, s->dma_dac.dmasize)); |
| memset(s->dma_dac.rawbuf, |
| (s->prop_dac. |
| fmt & (AFMT_U8 | AFMT_U16_LE)) ? |
| 0x80 : 0, s->dma_dac.dmasize); |
| if (s->dma_dac.count < 0) { |
| s->dma_dac.underrun = 1; |
| s->dma_dac.count = 0; |
| CS_DBGOUT(CS_ERROR, 9, printk(KERN_INFO |
| "cs4281: cs4281_update_ptr(): underrun\n")); |
| } |
| } else if (s->dma_dac.count <= |
| (signed) s->dma_dac.fragsize |
| && !s->dma_dac.endcleared) { |
| clear_advance(s->dma_dac.rawbuf, |
| s->dma_dac.dmasize, |
| s->dma_dac.swptr, |
| s->dma_dac.fragsize, |
| (s->prop_dac. |
| fmt & (AFMT_U8 | |
| AFMT_U16_LE)) ? 0x80 |
| : 0); |
| s->dma_dac.endcleared = 1; |
| } |
| if ( (s->dma_dac.count <= (signed) s->dma_dac.dmasize/2) || |
| intflag) |
| { |
| wake_up(&s->dma_dac.wait); |
| } |
| } |
| CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO |
| "cs4281: cs4281_update_ptr(): s=%p hwptr=%d total_bytes=%d count=%d \n", |
| s, s->dma_dac.hwptr, s->dma_dac.total_bytes, s->dma_dac.count)); |
| } |
| } |
| |
| |
| // --------------------------------------------------------------------- |
| |
| static void prog_codec(struct cs4281_state *s, unsigned type) |
| { |
| unsigned long flags; |
| unsigned temp1, format; |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: prog_codec()+ \n")); |
| |
| spin_lock_irqsave(&s->lock, flags); |
| if (type == CS_TYPE_ADC) { |
| temp1 = readl(s->pBA0 + BA0_DCR1); |
| writel(temp1 | DCRn_MSK, s->pBA0 + BA0_DCR1); // Stop capture DMA, if active. |
| |
| // program sampling rates |
| // Note, for CS4281, capture & play rates can be set independently. |
| cs4281_record_rate(s, s->prop_adc.rate); |
| |
| // program ADC parameters |
| format = DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE; |
| if (s->prop_adc. |
| fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE)) { // 16-bit |
| if (s->prop_adc.fmt & (AFMT_S16_BE | AFMT_U16_BE)) // Big-endian? |
| format |= DMRn_BEND; |
| if (s->prop_adc.fmt & (AFMT_U16_LE | AFMT_U16_BE)) |
| format |= DMRn_USIGN; // Unsigned. |
| } else |
| format |= DMRn_SIZE8 | DMRn_USIGN; // 8-bit, unsigned |
| if (s->prop_adc.channels < 2) |
| format |= DMRn_MONO; |
| |
| writel(format, s->pBA0 + BA0_DMR1); |
| |
| CS_DBGOUT(CS_PARMS, 2, printk(KERN_INFO |
| "cs4281: prog_codec(): adc %s %s %s rate=%d DMR0 format=0x%.8x\n", |
| (format & DMRn_SIZE8) ? "8" : "16", |
| (format & DMRn_USIGN) ? "Unsigned" : "Signed", |
| (format & DMRn_MONO) ? "Mono" : "Stereo", |
| s->prop_adc.rate, format)); |
| |
| s->ena &= ~FMODE_READ; // not capturing data yet |
| } |
| |
| |
| if (type == CS_TYPE_DAC) { |
| temp1 = readl(s->pBA0 + BA0_DCR0); |
| writel(temp1 | DCRn_MSK, s->pBA0 + BA0_DCR0); // Stop play DMA, if active. |
| |
| // program sampling rates |
| // Note, for CS4281, capture & play rates can be set independently. |
| cs4281_play_rate(s, s->prop_dac.rate); |
| |
| // program DAC parameters |
| format = DMRn_DMA | DMRn_AUTO | DMRn_TR_READ; |
| if (s->prop_dac. |
| fmt & (AFMT_S16_LE | AFMT_U16_LE | AFMT_S16_BE | AFMT_U16_BE)) { // 16-bit |
| if (s->prop_dac.fmt & (AFMT_S16_BE | AFMT_U16_BE)) |
| format |= DMRn_BEND; // Big Endian. |
| if (s->prop_dac.fmt & (AFMT_U16_LE | AFMT_U16_BE)) |
| format |= DMRn_USIGN; // Unsigned. |
| } else |
| format |= DMRn_SIZE8 | DMRn_USIGN; // 8-bit, unsigned |
| |
| if (s->prop_dac.channels < 2) |
| format |= DMRn_MONO; |
| |
| writel(format, s->pBA0 + BA0_DMR0); |
| |
| |
| CS_DBGOUT(CS_PARMS, 2, printk(KERN_INFO |
| "cs4281: prog_codec(): dac %s %s %s rate=%d DMR0 format=0x%.8x\n", |
| (format & DMRn_SIZE8) ? "8" : "16", |
| (format & DMRn_USIGN) ? "Unsigned" : "Signed", |
| (format & DMRn_MONO) ? "Mono" : "Stereo", |
| s->prop_dac.rate, format)); |
| |
| s->ena &= ~FMODE_WRITE; // not capturing data yet |
| |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: prog_codec()- \n")); |
| } |
| |
| |
| static int mixer_ioctl(struct cs4281_state *s, unsigned int cmd, |
| unsigned long arg) |
| { |
| // Index to mixer_src[] is value of AC97 Input Mux Select Reg. |
| // Value of array member is recording source Device ID Mask. |
| static const unsigned int mixer_src[8] = { |
| SOUND_MASK_MIC, SOUND_MASK_CD, 0, SOUND_MASK_LINE1, |
| SOUND_MASK_LINE, SOUND_MASK_VOLUME, 0, 0 |
| }; |
| void __user *argp = (void __user *)arg; |
| |
| // Index of mixtable1[] member is Device ID |
| // and must be <= SOUND_MIXER_NRDEVICES. |
| // Value of array member is index into s->mix.vol[] |
| static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = { |
| [SOUND_MIXER_PCM] = 1, // voice |
| [SOUND_MIXER_LINE1] = 2, // AUX |
| [SOUND_MIXER_CD] = 3, // CD |
| [SOUND_MIXER_LINE] = 4, // Line |
| [SOUND_MIXER_SYNTH] = 5, // FM |
| [SOUND_MIXER_MIC] = 6, // Mic |
| [SOUND_MIXER_SPEAKER] = 7, // Speaker |
| [SOUND_MIXER_RECLEV] = 8, // Recording level |
| [SOUND_MIXER_VOLUME] = 9 // Master Volume |
| }; |
| |
| |
| static const unsigned mixreg[] = { |
| BA0_AC97_PCM_OUT_VOLUME, |
| BA0_AC97_AUX_VOLUME, |
| BA0_AC97_CD_VOLUME, |
| BA0_AC97_LINE_IN_VOLUME |
| }; |
| unsigned char l, r, rl, rr, vidx; |
| unsigned char attentbl[11] = |
| { 63, 42, 26, 17, 14, 11, 8, 6, 4, 2, 0 }; |
| unsigned temp1; |
| int i, val; |
| |
| VALIDATE_STATE(s); |
| CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO |
| "cs4281: mixer_ioctl(): s=%p cmd=0x%.8x\n", s, cmd)); |
| #if CSDEBUG |
| cs_printioctl(cmd); |
| #endif |
| #if CSDEBUG_INTERFACE |
| |
| if ((cmd == SOUND_MIXER_CS_GETDBGMASK) || |
| (cmd == SOUND_MIXER_CS_SETDBGMASK) || |
| (cmd == SOUND_MIXER_CS_GETDBGLEVEL) || |
| (cmd == SOUND_MIXER_CS_SETDBGLEVEL) || |
| (cmd == SOUND_MIXER_CS_APM)) |
| { |
| switch (cmd) { |
| |
| case SOUND_MIXER_CS_GETDBGMASK: |
| return put_user(cs_debugmask, |
| (unsigned long __user *) argp); |
| |
| case SOUND_MIXER_CS_GETDBGLEVEL: |
| return put_user(cs_debuglevel, |
| (unsigned long __user *) argp); |
| |
| case SOUND_MIXER_CS_SETDBGMASK: |
| if (get_user(val, (unsigned long __user *) argp)) |
| return -EFAULT; |
| cs_debugmask = val; |
| return 0; |
| |
| case SOUND_MIXER_CS_SETDBGLEVEL: |
| if (get_user(val, (unsigned long __user *) argp)) |
| return -EFAULT; |
| cs_debuglevel = val; |
| return 0; |
| #ifndef NOT_CS4281_PM |
| case SOUND_MIXER_CS_APM: |
| if (get_user(val, (unsigned long __user *) argp)) |
| return -EFAULT; |
| if(val == CS_IOCTL_CMD_SUSPEND) |
| cs4281_suspend(s); |
| else if(val == CS_IOCTL_CMD_RESUME) |
| cs4281_resume(s); |
| else |
| { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO |
| "cs4281: mixer_ioctl(): invalid APM cmd (%d)\n", |
| val)); |
| } |
| return 0; |
| #endif |
| default: |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO |
| "cs4281: mixer_ioctl(): ERROR unknown debug cmd\n")); |
| return 0; |
| } |
| } |
| #endif |
| |
| if (cmd == SOUND_MIXER_PRIVATE1) { |
| // enable/disable/query mixer preamp |
| if (get_user(val, (int __user *) argp)) |
| return -EFAULT; |
| if (val != -1) { |
| cs4281_read_ac97(s, BA0_AC97_MIC_VOLUME, &temp1); |
| temp1 = val ? (temp1 | 0x40) : (temp1 & 0xffbf); |
| cs4281_write_ac97(s, BA0_AC97_MIC_VOLUME, temp1); |
| } |
| cs4281_read_ac97(s, BA0_AC97_MIC_VOLUME, &temp1); |
| val = (temp1 & 0x40) ? 1 : 0; |
| return put_user(val, (int __user *) argp); |
| } |
| if (cmd == SOUND_MIXER_PRIVATE2) { |
| // enable/disable/query spatializer |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| if (val != -1) { |
| temp1 = (val & 0x3f) >> 2; |
| cs4281_write_ac97(s, BA0_AC97_3D_CONTROL, temp1); |
| cs4281_read_ac97(s, BA0_AC97_GENERAL_PURPOSE, |
| &temp1); |
| cs4281_write_ac97(s, BA0_AC97_GENERAL_PURPOSE, |
| temp1 | 0x2000); |
| } |
| cs4281_read_ac97(s, BA0_AC97_3D_CONTROL, &temp1); |
| return put_user((temp1 << 2) | 3, (int __user *)argp); |
| } |
| if (cmd == SOUND_MIXER_INFO) { |
| mixer_info info; |
| strlcpy(info.id, "CS4281", sizeof(info.id)); |
| strlcpy(info.name, "Crystal CS4281", sizeof(info.name)); |
| info.modify_counter = s->mix.modcnt; |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == SOUND_OLD_MIXER_INFO) { |
| _old_mixer_info info; |
| strlcpy(info.id, "CS4281", sizeof(info.id)); |
| strlcpy(info.name, "Crystal CS4281", sizeof(info.name)); |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == OSS_GETVERSION) |
| return put_user(SOUND_VERSION, (int __user *) argp); |
| |
| if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int)) |
| return -EINVAL; |
| |
| // If ioctl has only the SIOC_READ bit(bit 31) |
| // on, process the only-read commands. |
| if (_SIOC_DIR(cmd) == _SIOC_READ) { |
| switch (_IOC_NR(cmd)) { |
| case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source |
| cs4281_read_ac97(s, BA0_AC97_RECORD_SELECT, &temp1); |
| return put_user(mixer_src[temp1&7], (int __user *)argp); |
| |
| case SOUND_MIXER_DEVMASK: // Arg contains a bit for each supported device |
| return put_user(SOUND_MASK_PCM | SOUND_MASK_SYNTH | |
| SOUND_MASK_CD | SOUND_MASK_LINE | |
| SOUND_MASK_LINE1 | SOUND_MASK_MIC | |
| SOUND_MASK_VOLUME | |
| SOUND_MASK_RECLEV | |
| SOUND_MASK_SPEAKER, (int __user *)argp); |
| |
| case SOUND_MIXER_RECMASK: // Arg contains a bit for each supported recording source |
| return put_user(SOUND_MASK_LINE | SOUND_MASK_MIC | |
| SOUND_MASK_CD | SOUND_MASK_VOLUME | |
| SOUND_MASK_LINE1, (int __user *) argp); |
| |
| case SOUND_MIXER_STEREODEVS: // Mixer channels supporting stereo |
| return put_user(SOUND_MASK_PCM | SOUND_MASK_SYNTH | |
| SOUND_MASK_CD | SOUND_MASK_LINE | |
| SOUND_MASK_LINE1 | SOUND_MASK_MIC | |
| SOUND_MASK_VOLUME | |
| SOUND_MASK_RECLEV, (int __user *)argp); |
| |
| case SOUND_MIXER_CAPS: |
| return put_user(SOUND_CAP_EXCL_INPUT, (int __user *)argp); |
| |
| default: |
| i = _IOC_NR(cmd); |
| if (i >= SOUND_MIXER_NRDEVICES |
| || !(vidx = mixtable1[i])) |
| return -EINVAL; |
| return put_user(s->mix.vol[vidx - 1], (int __user *)argp); |
| } |
| } |
| // If ioctl doesn't have both the SIOC_READ and |
| // the SIOC_WRITE bit set, return invalid. |
| if (_SIOC_DIR(cmd) != (_SIOC_READ | _SIOC_WRITE)) |
| return -EINVAL; |
| |
| // Increment the count of volume writes. |
| s->mix.modcnt++; |
| |
| // Isolate the command; it must be a write. |
| switch (_IOC_NR(cmd)) { |
| |
| case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| i = hweight32(val); // i = # bits on in val. |
| if (i != 1) // One & only 1 bit must be on. |
| return 0; |
| for (i = 0; i < sizeof(mixer_src) / sizeof(int); i++) { |
| if (val == mixer_src[i]) { |
| temp1 = (i << 8) | i; |
| cs4281_write_ac97(s, |
| BA0_AC97_RECORD_SELECT, |
| temp1); |
| return 0; |
| } |
| } |
| return 0; |
| |
| case SOUND_MIXER_VOLUME: |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| l = val & 0xff; |
| if (l > 100) |
| l = 100; // Max soundcard.h vol is 100. |
| if (l < 6) { |
| rl = 63; |
| l = 0; |
| } else |
| rl = attentbl[(10 * l) / 100]; // Convert 0-100 vol to 63-0 atten. |
| |
| r = (val >> 8) & 0xff; |
| if (r > 100) |
| r = 100; // Max right volume is 100, too |
| if (r < 6) { |
| rr = 63; |
| r = 0; |
| } else |
| rr = attentbl[(10 * r) / 100]; // Convert volume to attenuation. |
| |
| if ((rl > 60) && (rr > 60)) // If both l & r are 'low', |
| temp1 = 0x8000; // turn on the mute bit. |
| else |
| temp1 = 0; |
| |
| temp1 |= (rl << 8) | rr; |
| |
| cs4281_write_ac97(s, BA0_AC97_MASTER_VOLUME, temp1); |
| cs4281_write_ac97(s, BA0_AC97_HEADPHONE_VOLUME, temp1); |
| |
| #ifdef OSS_DOCUMENTED_MIXER_SEMANTICS |
| s->mix.vol[8] = ((unsigned int) r << 8) | l; |
| #else |
| s->mix.vol[8] = val; |
| #endif |
| return put_user(s->mix.vol[8], (int __user *)argp); |
| |
| case SOUND_MIXER_SPEAKER: |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| l = val & 0xff; |
| if (l > 100) |
| l = 100; |
| if (l < 3) { |
| rl = 0; |
| l = 0; |
| } else { |
| rl = (l * 2 - 5) / 13; // Convert 0-100 range to 0-15. |
| l = (rl * 13 + 5) / 2; |
| } |
| |
| if (rl < 3) { |
| temp1 = 0x8000; |
| rl = 0; |
| } else |
| temp1 = 0; |
| rl = 15 - rl; // Convert volume to attenuation. |
| temp1 |= rl << 1; |
| cs4281_write_ac97(s, BA0_AC97_PC_BEEP_VOLUME, temp1); |
| |
| #ifdef OSS_DOCUMENTED_MIXER_SEMANTICS |
| s->mix.vol[6] = l << 8; |
| #else |
| s->mix.vol[6] = val; |
| #endif |
| return put_user(s->mix.vol[6], (int __user *)argp); |
| |
| case SOUND_MIXER_RECLEV: |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| l = val & 0xff; |
| if (l > 100) |
| l = 100; |
| r = (val >> 8) & 0xff; |
| if (r > 100) |
| r = 100; |
| rl = (l * 2 - 5) / 13; // Convert 0-100 scale to 0-15. |
| rr = (r * 2 - 5) / 13; |
| if (rl < 3 && rr < 3) |
| temp1 = 0x8000; |
| else |
| temp1 = 0; |
| |
| temp1 = temp1 | (rl << 8) | rr; |
| cs4281_write_ac97(s, BA0_AC97_RECORD_GAIN, temp1); |
| |
| #ifdef OSS_DOCUMENTED_MIXER_SEMANTICS |
| s->mix.vol[7] = ((unsigned int) r << 8) | l; |
| #else |
| s->mix.vol[7] = val; |
| #endif |
| return put_user(s->mix.vol[7], (int __user *)argp); |
| |
| case SOUND_MIXER_MIC: |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| l = val & 0xff; |
| if (l > 100) |
| l = 100; |
| if (l < 1) { |
| l = 0; |
| rl = 0; |
| } else { |
| rl = ((unsigned) l * 5 - 4) / 16; // Convert 0-100 range to 0-31. |
| l = (rl * 16 + 4) / 5; |
| } |
| cs4281_read_ac97(s, BA0_AC97_MIC_VOLUME, &temp1); |
| temp1 &= 0x40; // Isolate 20db gain bit. |
| if (rl < 3) { |
| temp1 |= 0x8000; |
| rl = 0; |
| } |
| rl = 31 - rl; // Convert volume to attenuation. |
| temp1 |= rl; |
| cs4281_write_ac97(s, BA0_AC97_MIC_VOLUME, temp1); |
| |
| #ifdef OSS_DOCUMENTED_MIXER_SEMANTICS |
| s->mix.vol[5] = val << 8; |
| #else |
| s->mix.vol[5] = val; |
| #endif |
| return put_user(s->mix.vol[5], (int __user *)argp); |
| |
| |
| case SOUND_MIXER_SYNTH: |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| l = val & 0xff; |
| if (l > 100) |
| l = 100; |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| r = (val >> 8) & 0xff; |
| if (r > 100) |
| r = 100; |
| rl = (l * 2 - 11) / 3; // Convert 0-100 range to 0-63. |
| rr = (r * 2 - 11) / 3; |
| if (rl < 3) // If l is low, turn on |
| temp1 = 0x0080; // the mute bit. |
| else |
| temp1 = 0; |
| |
| rl = 63 - rl; // Convert vol to attenuation. |
| writel(temp1 | rl, s->pBA0 + BA0_FMLVC); |
| if (rr < 3) // If rr is low, turn on |
| temp1 = 0x0080; // the mute bit. |
| else |
| temp1 = 0; |
| rr = 63 - rr; // Convert vol to attenuation. |
| writel(temp1 | rr, s->pBA0 + BA0_FMRVC); |
| |
| #ifdef OSS_DOCUMENTED_MIXER_SEMANTICS |
| s->mix.vol[4] = (r << 8) | l; |
| #else |
| s->mix.vol[4] = val; |
| #endif |
| return put_user(s->mix.vol[4], (int __user *)argp); |
| |
| |
| default: |
| CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO |
| "cs4281: mixer_ioctl(): default\n")); |
| |
| i = _IOC_NR(cmd); |
| if (i >= SOUND_MIXER_NRDEVICES || !(vidx = mixtable1[i])) |
| return -EINVAL; |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| l = val & 0xff; |
| if (l > 100) |
| l = 100; |
| if (l < 1) { |
| l = 0; |
| rl = 31; |
| } else |
| rl = (attentbl[(l * 10) / 100]) >> 1; |
| |
| r = (val >> 8) & 0xff; |
| if (r > 100) |
| r = 100; |
| if (r < 1) { |
| r = 0; |
| rr = 31; |
| } else |
| rr = (attentbl[(r * 10) / 100]) >> 1; |
| if ((rl > 30) && (rr > 30)) |
| temp1 = 0x8000; |
| else |
| temp1 = 0; |
| temp1 = temp1 | (rl << 8) | rr; |
| cs4281_write_ac97(s, mixreg[vidx - 1], temp1); |
| |
| #ifdef OSS_DOCUMENTED_MIXER_SEMANTICS |
| s->mix.vol[vidx - 1] = ((unsigned int) r << 8) | l; |
| #else |
| s->mix.vol[vidx - 1] = val; |
| #endif |
| #ifndef NOT_CS4281_PM |
| CS_DBGOUT(CS_PM, 9, printk(KERN_INFO |
| "write ac97 mixreg[%d]=0x%x mix.vol[]=0x%x\n", |
| vidx-1,temp1,s->mix.vol[vidx-1])); |
| #endif |
| return put_user(s->mix.vol[vidx - 1], (int __user *)argp); |
| } |
| } |
| |
| |
| // --------------------------------------------------------------------- |
| |
| static int cs4281_open_mixdev(struct inode *inode, struct file *file) |
| { |
| unsigned int minor = iminor(inode); |
| struct cs4281_state *s=NULL; |
| struct list_head *entry; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4, |
| printk(KERN_INFO "cs4281: cs4281_open_mixdev()+\n")); |
| |
| list_for_each(entry, &cs4281_devs) |
| { |
| s = list_entry(entry, struct cs4281_state, list); |
| if(s->dev_mixer == minor) |
| break; |
| } |
| if (!s) |
| { |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, |
| printk(KERN_INFO "cs4281: cs4281_open_mixdev()- -ENODEV\n")); |
| return -ENODEV; |
| } |
| VALIDATE_STATE(s); |
| file->private_data = s; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4, |
| printk(KERN_INFO "cs4281: cs4281_open_mixdev()- 0\n")); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| |
| static int cs4281_release_mixdev(struct inode *inode, struct file *file) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| |
| VALIDATE_STATE(s); |
| return 0; |
| } |
| |
| |
| static int cs4281_ioctl_mixdev(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| return mixer_ioctl((struct cs4281_state *) file->private_data, cmd, |
| arg); |
| } |
| |
| |
| // ****************************************************************************************** |
| // Mixer file operations struct. |
| // ****************************************************************************************** |
| static /*const */ struct file_operations cs4281_mixer_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .ioctl = cs4281_ioctl_mixdev, |
| .open = cs4281_open_mixdev, |
| .release = cs4281_release_mixdev, |
| }; |
| |
| // --------------------------------------------------------------------- |
| |
| |
| static int drain_adc(struct cs4281_state *s, int nonblock) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long flags; |
| int count; |
| unsigned tmo; |
| |
| if (s->dma_adc.mapped) |
| return 0; |
| add_wait_queue(&s->dma_adc.wait, &wait); |
| for (;;) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| spin_lock_irqsave(&s->lock, flags); |
| count = s->dma_adc.count; |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: drain_adc() %d\n", count)); |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (count <= 0) { |
| CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_INFO |
| "cs4281: drain_adc() count<0\n")); |
| break; |
| } |
| if (signal_pending(current)) |
| break; |
| if (nonblock) { |
| remove_wait_queue(&s->dma_adc.wait, &wait); |
| current->state = TASK_RUNNING; |
| return -EBUSY; |
| } |
| tmo = |
| 3 * HZ * (count + |
| s->dma_adc.fragsize) / 2 / s->prop_adc.rate; |
| if (s->prop_adc.fmt & (AFMT_S16_LE | AFMT_U16_LE)) |
| tmo >>= 1; |
| if (s->prop_adc.channels > 1) |
| tmo >>= 1; |
| if (!schedule_timeout(tmo + 1)) |
| printk(KERN_DEBUG "cs4281: dma timed out??\n"); |
| } |
| remove_wait_queue(&s->dma_adc.wait, &wait); |
| current->state = TASK_RUNNING; |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| return 0; |
| } |
| |
| static int drain_dac(struct cs4281_state *s, int nonblock) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long flags; |
| int count; |
| unsigned tmo; |
| |
| if (s->dma_dac.mapped) |
| return 0; |
| add_wait_queue(&s->dma_dac.wait, &wait); |
| for (;;) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| spin_lock_irqsave(&s->lock, flags); |
| count = s->dma_dac.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (count <= 0) |
| break; |
| if (signal_pending(current)) |
| break; |
| if (nonblock) { |
| remove_wait_queue(&s->dma_dac.wait, &wait); |
| current->state = TASK_RUNNING; |
| return -EBUSY; |
| } |
| tmo = |
| 3 * HZ * (count + |
| s->dma_dac.fragsize) / 2 / s->prop_dac.rate; |
| if (s->prop_dac.fmt & (AFMT_S16_LE | AFMT_U16_LE)) |
| tmo >>= 1; |
| if (s->prop_dac.channels > 1) |
| tmo >>= 1; |
| if (!schedule_timeout(tmo + 1)) |
| printk(KERN_DEBUG "cs4281: dma timed out??\n"); |
| } |
| remove_wait_queue(&s->dma_dac.wait, &wait); |
| current->state = TASK_RUNNING; |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| return 0; |
| } |
| |
| //**************************************************************************** |
| // |
| // CopySamples copies 16-bit stereo samples from the source to the |
| // destination, possibly converting down to either 8-bit or mono or both. |
| // count specifies the number of output bytes to write. |
| // |
| // Arguments: |
| // |
| // dst - Pointer to a destination buffer. |
| // src - Pointer to a source buffer |
| // count - The number of bytes to copy into the destination buffer. |
| // iChannels - Stereo - 2 |
| // Mono - 1 |
| // fmt - AFMT_xxx (soundcard.h formats) |
| // |
| // NOTES: only call this routine for conversion to 8bit from 16bit |
| // |
| //**************************************************************************** |
| static void CopySamples(char *dst, char *src, int count, int iChannels, |
| unsigned fmt) |
| { |
| |
| unsigned short *psSrc; |
| long lAudioSample; |
| |
| CS_DBGOUT(CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: CopySamples()+ ")); |
| CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO |
| " dst=%p src=%p count=%d iChannels=%d fmt=0x%x\n", |
| dst, src, (unsigned) count, (unsigned) iChannels, (unsigned) fmt)); |
| |
| // Gershwin does format conversion in hardware so normally |
| // we don't do any host based coversion. The data formatter |
| // truncates 16 bit data to 8 bit and that causes some hiss. |
| // We have already forced the HW to do 16 bit sampling and |
| // 2 channel so that we can use software to round instead |
| // of truncate |
| |
| // |
| // See if the data should be output as 8-bit unsigned stereo. |
| // or if the data should be output at 8-bit unsigned mono. |
| // |
| if ( ((iChannels == 2) && (fmt & AFMT_U8)) || |
| ((iChannels == 1) && (fmt & AFMT_U8)) ) { |
| // |
| // Convert each 16-bit unsigned stereo sample to 8-bit unsigned |
| // stereo using rounding. |
| // |
| psSrc = (unsigned short *) src; |
| count = count / 2; |
| while (count--) { |
| lAudioSample = (long) psSrc[count] + (long) 0x80; |
| if (lAudioSample > 0xffff) { |
| lAudioSample = 0xffff; |
| } |
| dst[count] = (char) (lAudioSample >> 8); |
| } |
| } |
| // |
| // check for 8-bit signed stereo. |
| // |
| else if ((iChannels == 2) && (fmt & AFMT_S8)) { |
| // |
| // Convert each 16-bit stereo sample to 8-bit stereo using rounding. |
| // |
| psSrc = (short *) src; |
| while (count--) { |
| lAudioSample = |
| (((long) psSrc[0] + (long) psSrc[1]) / 2); |
| psSrc += 2; |
| *dst++ = (char) ((short) lAudioSample >> 8); |
| } |
| } |
| // |
| // Otherwise, the data should be output as 8-bit signed mono. |
| // |
| else if ((iChannels == 1) && (fmt & AFMT_S8)) { |
| // |
| // Convert each 16-bit signed mono sample to 8-bit signed mono |
| // using rounding. |
| // |
| psSrc = (short *) src; |
| count = count / 2; |
| while (count--) { |
| lAudioSample = |
| (((long) psSrc[0] + (long) psSrc[1]) / 2); |
| if (lAudioSample > 0x7fff) { |
| lAudioSample = 0x7fff; |
| } |
| psSrc += 2; |
| *dst++ = (char) ((short) lAudioSample >> 8); |
| } |
| } |
| } |
| |
| // |
| // cs_copy_to_user() |
| // replacement for the standard copy_to_user, to allow for a conversion from |
| // 16 bit to 8 bit if the record conversion is active. the cs4281 has some |
| // issues with 8 bit capture, so the driver always captures data in 16 bit |
| // and then if the user requested 8 bit, converts from 16 to 8 bit. |
| // |
| static unsigned cs_copy_to_user(struct cs4281_state *s, void __user *dest, |
| unsigned *hwsrc, unsigned cnt, |
| unsigned *copied) |
| { |
| void *src = hwsrc; //default to the standard destination buffer addr |
| |
| CS_DBGOUT(CS_FUNCTION, 6, printk(KERN_INFO |
| "cs_copy_to_user()+ fmt=0x%x fmt_o=0x%x cnt=%d dest=%p\n", |
| s->prop_adc.fmt, s->prop_adc.fmt_original, |
| (unsigned) cnt, dest)); |
| |
| if (cnt > s->dma_adc.dmasize) { |
| cnt = s->dma_adc.dmasize; |
| } |
| if (!cnt) { |
| *copied = 0; |
| return 0; |
| } |
| if (s->conversion) { |
| if (!s->tmpbuff) { |
| *copied = cnt / 2; |
| return 0; |
| } |
| CopySamples(s->tmpbuff, (void *) hwsrc, cnt, |
| (unsigned) s->prop_adc.channels, |
| s->prop_adc.fmt_original); |
| src = s->tmpbuff; |
| cnt = cnt / 2; |
| } |
| |
| if (copy_to_user(dest, src, cnt)) { |
| *copied = 0; |
| return -EFAULT; |
| } |
| *copied = cnt; |
| CS_DBGOUT(CS_FUNCTION, 2, printk(KERN_INFO |
| "cs4281: cs_copy_to_user()- copied bytes is %d \n", cnt)); |
| return 0; |
| } |
| |
| // --------------------------------------------------------------------- |
| |
| static ssize_t cs4281_read(struct file *file, char __user *buffer, size_t count, |
| loff_t * ppos) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| ssize_t ret; |
| unsigned long flags; |
| unsigned swptr; |
| int cnt; |
| unsigned copied = 0; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2, |
| printk(KERN_INFO "cs4281: cs4281_read()+ %Zu \n", count)); |
| |
| VALIDATE_STATE(s); |
| if (s->dma_adc.mapped) |
| return -ENXIO; |
| if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s))) |
| return ret; |
| if (!access_ok(VERIFY_WRITE, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| // |
| // "count" is the amount of bytes to read (from app), is decremented each loop |
| // by the amount of bytes that have been returned to the user buffer. |
| // "cnt" is the running total of each read from the buffer (changes each loop) |
| // "buffer" points to the app's buffer |
| // "ret" keeps a running total of the amount of bytes that have been copied |
| // to the user buffer. |
| // "copied" is the total bytes copied into the user buffer for each loop. |
| // |
| while (count > 0) { |
| CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO |
| "_read() count>0 count=%Zu .count=%d .swptr=%d .hwptr=%d \n", |
| count, s->dma_adc.count, |
| s->dma_adc.swptr, s->dma_adc.hwptr)); |
| spin_lock_irqsave(&s->lock, flags); |
| |
| // get the current copy point of the sw buffer |
| swptr = s->dma_adc.swptr; |
| |
| // cnt is the amount of unread bytes from the end of the |
| // hw buffer to the current sw pointer |
| cnt = s->dma_adc.dmasize - swptr; |
| |
| // dma_adc.count is the current total bytes that have not been read. |
| // if the amount of unread bytes from the current sw pointer to the |
| // end of the buffer is greater than the current total bytes that |
| // have not been read, then set the "cnt" (unread bytes) to the |
| // amount of unread bytes. |
| |
| if (s->dma_adc.count < cnt) |
| cnt = s->dma_adc.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| // |
| // if we are converting from 8/16 then we need to copy |
| // twice the number of 16 bit bytes then 8 bit bytes. |
| // |
| if (s->conversion) { |
| if (cnt > (count * 2)) |
| cnt = (count * 2); |
| } else { |
| if (cnt > count) |
| cnt = count; |
| } |
| // |
| // "cnt" NOW is the smaller of the amount that will be read, |
| // and the amount that is requested in this read (or partial). |
| // if there are no bytes in the buffer to read, then start the |
| // ADC and wait for the interrupt handler to wake us up. |
| // |
| if (cnt <= 0) { |
| |
| // start up the dma engine and then continue back to the top of |
| // the loop when wake up occurs. |
| start_adc(s); |
| if (file->f_flags & O_NONBLOCK) |
| return ret ? ret : -EAGAIN; |
| interruptible_sleep_on(&s->dma_adc.wait); |
| if (signal_pending(current)) |
| return ret ? ret : -ERESTARTSYS; |
| continue; |
| } |
| // there are bytes in the buffer to read. |
| // copy from the hw buffer over to the user buffer. |
| // user buffer is designated by "buffer" |
| // virtual address to copy from is rawbuf+swptr |
| // the "cnt" is the number of bytes to read. |
| |
| CS_DBGOUT(CS_WAVE_READ, 2, printk(KERN_INFO |
| "_read() copy_to cnt=%d count=%Zu ", cnt, count)); |
| CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO |
| " .dmasize=%d .count=%d buffer=%p ret=%Zd\n", |
| s->dma_adc.dmasize, s->dma_adc.count, buffer, ret)); |
| |
| if (cs_copy_to_user |
| (s, buffer, s->dma_adc.rawbuf + swptr, cnt, &copied)) |
| return ret ? ret : -EFAULT; |
| swptr = (swptr + cnt) % s->dma_adc.dmasize; |
| spin_lock_irqsave(&s->lock, flags); |
| s->dma_adc.swptr = swptr; |
| s->dma_adc.count -= cnt; |
| spin_unlock_irqrestore(&s->lock, flags); |
| count -= copied; |
| buffer += copied; |
| ret += copied; |
| start_adc(s); |
| } |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2, |
| printk(KERN_INFO "cs4281: cs4281_read()- %Zd\n", ret)); |
| return ret; |
| } |
| |
| |
| static ssize_t cs4281_write(struct file *file, const char __user *buffer, |
| size_t count, loff_t * ppos) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| ssize_t ret; |
| unsigned long flags; |
| unsigned swptr, hwptr, busaddr; |
| int cnt; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2, |
| printk(KERN_INFO "cs4281: cs4281_write()+ count=%Zu\n", |
| count)); |
| VALIDATE_STATE(s); |
| |
| if (s->dma_dac.mapped) |
| return -ENXIO; |
| if (!s->dma_dac.ready && (ret = prog_dmabuf_dac(s))) |
| return ret; |
| if (!access_ok(VERIFY_READ, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| while (count > 0) { |
| spin_lock_irqsave(&s->lock, flags); |
| if (s->dma_dac.count < 0) { |
| s->dma_dac.count = 0; |
| s->dma_dac.swptr = s->dma_dac.hwptr; |
| } |
| if (s->dma_dac.underrun) { |
| s->dma_dac.underrun = 0; |
| hwptr = readl(s->pBA0 + BA0_DCA0); |
| busaddr = virt_to_bus(s->dma_dac.rawbuf); |
| hwptr -= (unsigned) busaddr; |
| s->dma_dac.swptr = s->dma_dac.hwptr = hwptr; |
| } |
| swptr = s->dma_dac.swptr; |
| cnt = s->dma_dac.dmasize - swptr; |
| if (s->dma_dac.count + cnt > s->dma_dac.dmasize) |
| cnt = s->dma_dac.dmasize - s->dma_dac.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (cnt > count) |
| cnt = count; |
| if (cnt <= 0) { |
| start_dac(s); |
| if (file->f_flags & O_NONBLOCK) |
| return ret ? ret : -EAGAIN; |
| interruptible_sleep_on(&s->dma_dac.wait); |
| if (signal_pending(current)) |
| return ret ? ret : -ERESTARTSYS; |
| continue; |
| } |
| if (copy_from_user(s->dma_dac.rawbuf + swptr, buffer, cnt)) |
| return ret ? ret : -EFAULT; |
| swptr = (swptr + cnt) % s->dma_dac.dmasize; |
| spin_lock_irqsave(&s->lock, flags); |
| s->dma_dac.swptr = swptr; |
| s->dma_dac.count += cnt; |
| s->dma_dac.endcleared = 0; |
| spin_unlock_irqrestore(&s->lock, flags); |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| start_dac(s); |
| } |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2, |
| printk(KERN_INFO "cs4281: cs4281_write()- %Zd\n", ret)); |
| return ret; |
| } |
| |
| |
| static unsigned int cs4281_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| unsigned long flags; |
| unsigned int mask = 0; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, |
| printk(KERN_INFO "cs4281: cs4281_poll()+\n")); |
| VALIDATE_STATE(s); |
| if (file->f_mode & FMODE_WRITE) { |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, |
| printk(KERN_INFO |
| "cs4281: cs4281_poll() wait on FMODE_WRITE\n")); |
| if(!s->dma_dac.ready && prog_dmabuf_dac(s)) |
| return 0; |
| poll_wait(file, &s->dma_dac.wait, wait); |
| } |
| if (file->f_mode & FMODE_READ) { |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, |
| printk(KERN_INFO |
| "cs4281: cs4281_poll() wait on FMODE_READ\n")); |
| if(!s->dma_dac.ready && prog_dmabuf_adc(s)) |
| return 0; |
| poll_wait(file, &s->dma_adc.wait, wait); |
| } |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_update_ptr(s,CS_FALSE); |
| if (file->f_mode & FMODE_WRITE) { |
| if (s->dma_dac.mapped) { |
| if (s->dma_dac.count >= |
| (signed) s->dma_dac.fragsize) { |
| if (s->dma_dac.wakeup) |
| mask |= POLLOUT | POLLWRNORM; |
| else |
| mask = 0; |
| s->dma_dac.wakeup = 0; |
| } |
| } else { |
| if ((signed) (s->dma_dac.dmasize/2) >= s->dma_dac.count) |
| mask |= POLLOUT | POLLWRNORM; |
| } |
| } else if (file->f_mode & FMODE_READ) { |
| if (s->dma_adc.mapped) { |
| if (s->dma_adc.count >= (signed) s->dma_adc.fragsize) |
| mask |= POLLIN | POLLRDNORM; |
| } else { |
| if (s->dma_adc.count > 0) |
| mask |= POLLIN | POLLRDNORM; |
| } |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, |
| printk(KERN_INFO "cs4281: cs4281_poll()- 0x%.8x\n", |
| mask)); |
| return mask; |
| } |
| |
| |
| static int cs4281_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| struct dmabuf *db; |
| int ret; |
| unsigned long size; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_PARMS | CS_OPEN, 4, |
| printk(KERN_INFO "cs4281: cs4281_mmap()+\n")); |
| |
| VALIDATE_STATE(s); |
| if (vma->vm_flags & VM_WRITE) { |
| if ((ret = prog_dmabuf_dac(s)) != 0) |
| return ret; |
| db = &s->dma_dac; |
| } else if (vma->vm_flags & VM_READ) { |
| if ((ret = prog_dmabuf_adc(s)) != 0) |
| return ret; |
| db = &s->dma_adc; |
| } else |
| return -EINVAL; |
| // |
| // only support PLAYBACK for now |
| // |
| db = &s->dma_dac; |
| |
| if (cs4x_pgoff(vma) != 0) |
| return -EINVAL; |
| size = vma->vm_end - vma->vm_start; |
| if (size > (PAGE_SIZE << db->buforder)) |
| return -EINVAL; |
| if (remap_pfn_range(vma, vma->vm_start, |
| virt_to_phys(db->rawbuf) >> PAGE_SHIFT, |
| size, vma->vm_page_prot)) |
| return -EAGAIN; |
| db->mapped = 1; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_PARMS | CS_OPEN, 4, |
| printk(KERN_INFO "cs4281: cs4281_mmap()- 0 size=%d\n", |
| (unsigned) size)); |
| |
| return 0; |
| } |
| |
| |
| static int cs4281_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| unsigned long flags; |
| audio_buf_info abinfo; |
| count_info cinfo; |
| int val, mapped, ret; |
| int __user *p = (int __user *)arg; |
| |
| CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): file=%p cmd=0x%.8x\n", file, cmd)); |
| #if CSDEBUG |
| cs_printioctl(cmd); |
| #endif |
| VALIDATE_STATE(s); |
| mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) || |
| ((file->f_mode & FMODE_READ) && s->dma_adc.mapped); |
| switch (cmd) { |
| case OSS_GETVERSION: |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): SOUND_VERSION=0x%.8x\n", |
| SOUND_VERSION)); |
| return put_user(SOUND_VERSION, p); |
| |
| case SNDCTL_DSP_SYNC: |
| CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_SYNC\n")); |
| if (file->f_mode & FMODE_WRITE) |
| return drain_dac(s, |
| 0 /*file->f_flags & O_NONBLOCK */ |
| ); |
| return 0; |
| |
| case SNDCTL_DSP_SETDUPLEX: |
| return 0; |
| |
| case SNDCTL_DSP_GETCAPS: |
| return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME | |
| DSP_CAP_TRIGGER | DSP_CAP_MMAP, |
| p); |
| |
| case SNDCTL_DSP_RESET: |
| CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_RESET\n")); |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| synchronize_irq(s->irq); |
| s->dma_dac.swptr = s->dma_dac.hwptr = |
| s->dma_dac.count = s->dma_dac.total_bytes = |
| s->dma_dac.blocks = s->dma_dac.wakeup = 0; |
| prog_codec(s, CS_TYPE_DAC); |
| } |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| synchronize_irq(s->irq); |
| s->dma_adc.swptr = s->dma_adc.hwptr = |
| s->dma_adc.count = s->dma_adc.total_bytes = |
| s->dma_adc.blocks = s->dma_dac.wakeup = 0; |
| prog_codec(s, CS_TYPE_ADC); |
| } |
| return 0; |
| |
| case SNDCTL_DSP_SPEED: |
| if (get_user(val, p)) |
| return -EFAULT; |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_SPEED val=%d\n", val)); |
| // |
| // support independent capture and playback channels |
| // assume that the file mode bit determines the |
| // direction of the data flow. |
| // |
| if (file->f_mode & FMODE_READ) { |
| if (val >= 0) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| // program sampling rates |
| if (val > 48000) |
| val = 48000; |
| if (val < 6300) |
| val = 6300; |
| s->prop_adc.rate = val; |
| prog_codec(s, CS_TYPE_ADC); |
| } |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| if (val >= 0) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| // program sampling rates |
| if (val > 48000) |
| val = 48000; |
| if (val < 6300) |
| val = 6300; |
| s->prop_dac.rate = val; |
| prog_codec(s, CS_TYPE_DAC); |
| } |
| } |
| |
| if (file->f_mode & FMODE_WRITE) |
| val = s->prop_dac.rate; |
| else if (file->f_mode & FMODE_READ) |
| val = s->prop_adc.rate; |
| |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_STEREO: |
| if (get_user(val, p)) |
| return -EFAULT; |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_STEREO val=%d\n", val)); |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| s->prop_adc.channels = val ? 2 : 1; |
| prog_codec(s, CS_TYPE_ADC); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| s->prop_dac.channels = val ? 2 : 1; |
| prog_codec(s, CS_TYPE_DAC); |
| } |
| return 0; |
| |
| case SNDCTL_DSP_CHANNELS: |
| if (get_user(val, p)) |
| return -EFAULT; |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_CHANNELS val=%d\n", |
| val)); |
| if (val != 0) { |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| if (val >= 2) |
| s->prop_adc.channels = 2; |
| else |
| s->prop_adc.channels = 1; |
| prog_codec(s, CS_TYPE_ADC); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| if (val >= 2) |
| s->prop_dac.channels = 2; |
| else |
| s->prop_dac.channels = 1; |
| prog_codec(s, CS_TYPE_DAC); |
| } |
| } |
| |
| if (file->f_mode & FMODE_WRITE) |
| val = s->prop_dac.channels; |
| else if (file->f_mode & FMODE_READ) |
| val = s->prop_adc.channels; |
| |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_GETFMTS: // Returns a mask |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_GETFMT val=0x%.8x\n", |
| AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 | |
| AFMT_U8)); |
| return put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 | |
| AFMT_U8, p); |
| |
| case SNDCTL_DSP_SETFMT: |
| if (get_user(val, p)) |
| return -EFAULT; |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_SETFMT val=0x%.8x\n", |
| val)); |
| if (val != AFMT_QUERY) { |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| if (val != AFMT_S16_LE |
| && val != AFMT_U16_LE && val != AFMT_S8 |
| && val != AFMT_U8) |
| val = AFMT_U8; |
| s->prop_adc.fmt = val; |
| s->prop_adc.fmt_original = s->prop_adc.fmt; |
| prog_codec(s, CS_TYPE_ADC); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| if (val != AFMT_S16_LE |
| && val != AFMT_U16_LE && val != AFMT_S8 |
| && val != AFMT_U8) |
| val = AFMT_U8; |
| s->prop_dac.fmt = val; |
| s->prop_dac.fmt_original = s->prop_dac.fmt; |
| prog_codec(s, CS_TYPE_DAC); |
| } |
| } else { |
| if (file->f_mode & FMODE_WRITE) |
| val = s->prop_dac.fmt_original; |
| else if (file->f_mode & FMODE_READ) |
| val = s->prop_adc.fmt_original; |
| } |
| CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_SETFMT return val=0x%.8x\n", |
| val)); |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_POST: |
| CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): DSP_POST\n")); |
| return 0; |
| |
| case SNDCTL_DSP_GETTRIGGER: |
| val = 0; |
| if (file->f_mode & s->ena & FMODE_READ) |
| val |= PCM_ENABLE_INPUT; |
| if (file->f_mode & s->ena & FMODE_WRITE) |
| val |= PCM_ENABLE_OUTPUT; |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_SETTRIGGER: |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (file->f_mode & FMODE_READ) { |
| if (val & PCM_ENABLE_INPUT) { |
| if (!s->dma_adc.ready |
| && (ret = prog_dmabuf_adc(s))) |
| return ret; |
| start_adc(s); |
| } else |
| stop_adc(s); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| if (val & PCM_ENABLE_OUTPUT) { |
| if (!s->dma_dac.ready |
| && (ret = prog_dmabuf_dac(s))) |
| return ret; |
| start_dac(s); |
| } else |
| stop_dac(s); |
| } |
| return 0; |
| |
| case SNDCTL_DSP_GETOSPACE: |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| if (!s->dma_dac.ready && (val = prog_dmabuf_dac(s))) |
| return val; |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_update_ptr(s,CS_FALSE); |
| abinfo.fragsize = s->dma_dac.fragsize; |
| if (s->dma_dac.mapped) |
| abinfo.bytes = s->dma_dac.dmasize; |
| else |
| abinfo.bytes = |
| s->dma_dac.dmasize - s->dma_dac.count; |
| abinfo.fragstotal = s->dma_dac.numfrag; |
| abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift; |
| CS_DBGOUT(CS_FUNCTION | CS_PARMS, 4, printk(KERN_INFO |
| "cs4281: cs4281_ioctl(): GETOSPACE .fragsize=%d .bytes=%d .fragstotal=%d .fragments=%d\n", |
| abinfo.fragsize,abinfo.bytes,abinfo.fragstotal, |
| abinfo.fragments)); |
| spin_unlock_irqrestore(&s->lock, flags); |
| return copy_to_user(p, &abinfo, |
| sizeof(abinfo)) ? -EFAULT : 0; |
| |
| case SNDCTL_DSP_GETISPACE: |
| if (!(file->f_mode & FMODE_READ)) |
| return -EINVAL; |
| if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s))) |
| return val; |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_update_ptr(s,CS_FALSE); |
| if (s->conversion) { |
| abinfo.fragsize = s->dma_adc.fragsize / 2; |
| abinfo.bytes = s->dma_adc.count / 2; |
| abinfo.fragstotal = s->dma_adc.numfrag; |
| abinfo.fragments = |
| abinfo.bytes >> (s->dma_adc.fragshift - 1); |
| } else { |
| abinfo.fragsize = s->dma_adc.fragsize; |
| abinfo.bytes = s->dma_adc.count; |
| abinfo.fragstotal = s->dma_adc.numfrag; |
| abinfo.fragments = |
| abinfo.bytes >> s->dma_adc.fragshift; |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| return copy_to_user(p, &abinfo, |
| sizeof(abinfo)) ? -EFAULT : 0; |
| |
| case SNDCTL_DSP_NONBLOCK: |
| file->f_flags |= O_NONBLOCK; |
| return 0; |
| |
| case SNDCTL_DSP_GETODELAY: |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| if(!s->dma_dac.ready && prog_dmabuf_dac(s)) |
| return 0; |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_update_ptr(s,CS_FALSE); |
| val = s->dma_dac.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_GETIPTR: |
| if (!(file->f_mode & FMODE_READ)) |
| return -EINVAL; |
| if(!s->dma_adc.ready && prog_dmabuf_adc(s)) |
| return 0; |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_update_ptr(s,CS_FALSE); |
| cinfo.bytes = s->dma_adc.total_bytes; |
| if (s->dma_adc.mapped) { |
| cinfo.blocks = |
| (cinfo.bytes >> s->dma_adc.fragshift) - |
| s->dma_adc.blocks; |
| s->dma_adc.blocks = |
| cinfo.bytes >> s->dma_adc.fragshift; |
| } else { |
| if (s->conversion) { |
| cinfo.blocks = |
| s->dma_adc.count / |
| 2 >> (s->dma_adc.fragshift - 1); |
| } else |
| cinfo.blocks = |
| s->dma_adc.count >> s->dma_adc. |
| fragshift; |
| } |
| if (s->conversion) |
| cinfo.ptr = s->dma_adc.hwptr / 2; |
| else |
| cinfo.ptr = s->dma_adc.hwptr; |
| if (s->dma_adc.mapped) |
| s->dma_adc.count &= s->dma_adc.fragsize - 1; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (copy_to_user(p, &cinfo, sizeof(cinfo))) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETOPTR: |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| if(!s->dma_dac.ready && prog_dmabuf_dac(s)) |
| return 0; |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_update_ptr(s,CS_FALSE); |
| cinfo.bytes = s->dma_dac.total_bytes; |
| if (s->dma_dac.mapped) { |
| cinfo.blocks = |
| (cinfo.bytes >> s->dma_dac.fragshift) - |
| s->dma_dac.blocks; |
| s->dma_dac.blocks = |
| cinfo.bytes >> s->dma_dac.fragshift; |
| } else { |
| cinfo.blocks = |
| s->dma_dac.count >> s->dma_dac.fragshift; |
| } |
| cinfo.ptr = s->dma_dac.hwptr; |
| if (s->dma_dac.mapped) |
| s->dma_dac.count &= s->dma_dac.fragsize - 1; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (copy_to_user(p, &cinfo, sizeof(cinfo))) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETBLKSIZE: |
| if (file->f_mode & FMODE_WRITE) { |
| if ((val = prog_dmabuf_dac(s))) |
| return val; |
| return put_user(s->dma_dac.fragsize, p); |
| } |
| if ((val = prog_dmabuf_adc(s))) |
| return val; |
| if (s->conversion) |
| return put_user(s->dma_adc.fragsize / 2, p); |
| else |
| return put_user(s->dma_adc.fragsize, p); |
| |
| case SNDCTL_DSP_SETFRAGMENT: |
| if (get_user(val, p)) |
| return -EFAULT; |
| return 0; // Say OK, but do nothing. |
| |
| case SNDCTL_DSP_SUBDIVIDE: |
| if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision) |
| || (file->f_mode & FMODE_WRITE |
| && s->dma_dac.subdivision)) return -EINVAL; |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (val != 1 && val != 2 && val != 4) |
| return -EINVAL; |
| if (file->f_mode & FMODE_READ) |
| s->dma_adc.subdivision = val; |
| else if (file->f_mode & FMODE_WRITE) |
| s->dma_dac.subdivision = val; |
| return 0; |
| |
| case SOUND_PCM_READ_RATE: |
| if (file->f_mode & FMODE_READ) |
| return put_user(s->prop_adc.rate, p); |
| else if (file->f_mode & FMODE_WRITE) |
| return put_user(s->prop_dac.rate, p); |
| |
| case SOUND_PCM_READ_CHANNELS: |
| if (file->f_mode & FMODE_READ) |
| return put_user(s->prop_adc.channels, p); |
| else if (file->f_mode & FMODE_WRITE) |
| return put_user(s->prop_dac.channels, p); |
| |
| case SOUND_PCM_READ_BITS: |
| if (file->f_mode & FMODE_READ) |
| return |
| put_user( |
| (s->prop_adc. |
| fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16, |
| p); |
| else if (file->f_mode & FMODE_WRITE) |
| return |
| put_user( |
| (s->prop_dac. |
| fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16, |
| p); |
| |
| case SOUND_PCM_WRITE_FILTER: |
| case SNDCTL_DSP_SETSYNCRO: |
| case SOUND_PCM_READ_FILTER: |
| return -EINVAL; |
| } |
| return mixer_ioctl(s, cmd, arg); |
| } |
| |
| |
| static int cs4281_release(struct inode *inode, struct file *file) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_RELEASE, 2, printk(KERN_INFO |
| "cs4281: cs4281_release(): inode=%p file=%p f_mode=%d\n", |
| inode, file, file->f_mode)); |
| |
| VALIDATE_STATE(s); |
| |
| if (file->f_mode & FMODE_WRITE) { |
| drain_dac(s, file->f_flags & O_NONBLOCK); |
| mutex_lock(&s->open_sem_dac); |
| stop_dac(s); |
| dealloc_dmabuf(s, &s->dma_dac); |
| s->open_mode &= ~FMODE_WRITE; |
| mutex_unlock(&s->open_sem_dac); |
| wake_up(&s->open_wait_dac); |
| } |
| if (file->f_mode & FMODE_READ) { |
| drain_adc(s, file->f_flags & O_NONBLOCK); |
| mutex_lock(&s->open_sem_adc); |
| stop_adc(s); |
| dealloc_dmabuf(s, &s->dma_adc); |
| s->open_mode &= ~FMODE_READ; |
| mutex_unlock(&s->open_sem_adc); |
| wake_up(&s->open_wait_adc); |
| } |
| return 0; |
| } |
| |
| static int cs4281_open(struct inode *inode, struct file *file) |
| { |
| unsigned int minor = iminor(inode); |
| struct cs4281_state *s=NULL; |
| struct list_head *entry; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO |
| "cs4281: cs4281_open(): inode=%p file=%p f_mode=0x%x\n", |
| inode, file, file->f_mode)); |
| |
| list_for_each(entry, &cs4281_devs) |
| { |
| s = list_entry(entry, struct cs4281_state, list); |
| |
| if (!((s->dev_audio ^ minor) & ~0xf)) |
| break; |
| } |
| if (entry == &cs4281_devs) |
| return -ENODEV; |
| if (!s) { |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO |
| "cs4281: cs4281_open(): Error - unable to find audio state struct\n")); |
| return -ENODEV; |
| } |
| VALIDATE_STATE(s); |
| file->private_data = s; |
| |
| // wait for device to become free |
| if (!(file->f_mode & (FMODE_WRITE | FMODE_READ))) { |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, printk(KERN_INFO |
| "cs4281: cs4281_open(): Error - must open READ and/or WRITE\n")); |
| return -ENODEV; |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| mutex_lock(&s->open_sem_dac); |
| while (s->open_mode & FMODE_WRITE) { |
| if (file->f_flags & O_NONBLOCK) { |
| mutex_unlock(&s->open_sem_dac); |
| return -EBUSY; |
| } |
| mutex_unlock(&s->open_sem_dac); |
| interruptible_sleep_on(&s->open_wait_dac); |
| |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| mutex_lock(&s->open_sem_dac); |
| } |
| } |
| if (file->f_mode & FMODE_READ) { |
| mutex_lock(&s->open_sem_adc); |
| while (s->open_mode & FMODE_READ) { |
| if (file->f_flags & O_NONBLOCK) { |
| mutex_unlock(&s->open_sem_adc); |
| return -EBUSY; |
| } |
| mutex_unlock(&s->open_sem_adc); |
| interruptible_sleep_on(&s->open_wait_adc); |
| |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| mutex_lock(&s->open_sem_adc); |
| } |
| } |
| s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE); |
| if (file->f_mode & FMODE_READ) { |
| s->prop_adc.fmt = AFMT_U8; |
| s->prop_adc.fmt_original = s->prop_adc.fmt; |
| s->prop_adc.channels = 1; |
| s->prop_adc.rate = 8000; |
| s->prop_adc.clkdiv = 96 | 0x80; |
| s->conversion = 0; |
| s->ena &= ~FMODE_READ; |
| s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags = |
| s->dma_adc.subdivision = 0; |
| mutex_unlock(&s->open_sem_adc); |
| |
| if (prog_dmabuf_adc(s)) { |
| CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR |
| "cs4281: adc Program dmabufs failed.\n")); |
| cs4281_release(inode, file); |
| return -ENOMEM; |
| } |
| prog_codec(s, CS_TYPE_ADC); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| s->prop_dac.fmt = AFMT_U8; |
| s->prop_dac.fmt_original = s->prop_dac.fmt; |
| s->prop_dac.channels = 1; |
| s->prop_dac.rate = 8000; |
| s->prop_dac.clkdiv = 96 | 0x80; |
| s->conversion = 0; |
| s->ena &= ~FMODE_WRITE; |
| s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags = |
| s->dma_dac.subdivision = 0; |
| mutex_unlock(&s->open_sem_dac); |
| |
| if (prog_dmabuf_dac(s)) { |
| CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR |
| "cs4281: dac Program dmabufs failed.\n")); |
| cs4281_release(inode, file); |
| return -ENOMEM; |
| } |
| prog_codec(s, CS_TYPE_DAC); |
| } |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, |
| printk(KERN_INFO "cs4281: cs4281_open()- 0\n")); |
| return nonseekable_open(inode, file); |
| } |
| |
| |
| // ****************************************************************************************** |
| // Wave (audio) file operations struct. |
| // ****************************************************************************************** |
| static /*const */ struct file_operations cs4281_audio_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = cs4281_read, |
| .write = cs4281_write, |
| .poll = cs4281_poll, |
| .ioctl = cs4281_ioctl, |
| .mmap = cs4281_mmap, |
| .open = cs4281_open, |
| .release = cs4281_release, |
| }; |
| |
| // --------------------------------------------------------------------- |
| |
| // hold spinlock for the following! |
| static void cs4281_handle_midi(struct cs4281_state *s) |
| { |
| unsigned char ch; |
| int wake; |
| unsigned temp1; |
| |
| wake = 0; |
| while (!(readl(s->pBA0 + BA0_MIDSR) & 0x80)) { |
| ch = readl(s->pBA0 + BA0_MIDRP); |
| if (s->midi.icnt < MIDIINBUF) { |
| s->midi.ibuf[s->midi.iwr] = ch; |
| s->midi.iwr = (s->midi.iwr + 1) % MIDIINBUF; |
| s->midi.icnt++; |
| } |
| wake = 1; |
| } |
| if (wake) |
| wake_up(&s->midi.iwait); |
| wake = 0; |
| while (!(readl(s->pBA0 + BA0_MIDSR) & 0x40) && s->midi.ocnt > 0) { |
| temp1 = (s->midi.obuf[s->midi.ord]) & 0x000000ff; |
| writel(temp1, s->pBA0 + BA0_MIDWP); |
| s->midi.ord = (s->midi.ord + 1) % MIDIOUTBUF; |
| s->midi.ocnt--; |
| if (s->midi.ocnt < MIDIOUTBUF - 16) |
| wake = 1; |
| } |
| if (wake) |
| wake_up(&s->midi.owait); |
| } |
| |
| |
| |
| static irqreturn_t cs4281_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct cs4281_state *s = (struct cs4281_state *) dev_id; |
| unsigned int temp1; |
| |
| // fastpath out, to ease interrupt sharing |
| temp1 = readl(s->pBA0 + BA0_HISR); // Get Int Status reg. |
| |
| CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO |
| "cs4281: cs4281_interrupt() BA0_HISR=0x%.8x\n", temp1)); |
| /* |
| * If not DMA or MIDI interrupt, then just return. |
| */ |
| if (!(temp1 & (HISR_DMA0 | HISR_DMA1 | HISR_MIDI))) { |
| writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); |
| CS_DBGOUT(CS_INTERRUPT, 9, printk(KERN_INFO |
| "cs4281: cs4281_interrupt(): returning not cs4281 interrupt.\n")); |
| return IRQ_NONE; |
| } |
| |
| if (temp1 & HISR_DMA0) // If play interrupt, |
| readl(s->pBA0 + BA0_HDSR0); // clear the source. |
| |
| if (temp1 & HISR_DMA1) // Same for play. |
| readl(s->pBA0 + BA0_HDSR1); |
| writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Local EOI |
| |
| spin_lock(&s->lock); |
| cs4281_update_ptr(s,CS_TRUE); |
| cs4281_handle_midi(s); |
| spin_unlock(&s->lock); |
| return IRQ_HANDLED; |
| } |
| |
| // ************************************************************************** |
| |
| static void cs4281_midi_timer(unsigned long data) |
| { |
| struct cs4281_state *s = (struct cs4281_state *) data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_handle_midi(s); |
| spin_unlock_irqrestore(&s->lock, flags); |
| s->midi.timer.expires = jiffies + 1; |
| add_timer(&s->midi.timer); |
| } |
| |
| |
| // --------------------------------------------------------------------- |
| |
| static ssize_t cs4281_midi_read(struct file *file, char __user *buffer, |
| size_t count, loff_t * ppos) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| ssize_t ret; |
| unsigned long flags; |
| unsigned ptr; |
| int cnt; |
| |
| VALIDATE_STATE(s); |
| if (!access_ok(VERIFY_WRITE, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| while (count > 0) { |
| spin_lock_irqsave(&s->lock, flags); |
| ptr = s->midi.ird; |
| cnt = MIDIINBUF - ptr; |
| if (s->midi.icnt < cnt) |
| cnt = s->midi.icnt; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (cnt > count) |
| cnt = count; |
| if (cnt <= 0) { |
| if (file->f_flags & O_NONBLOCK) |
| return ret ? ret : -EAGAIN; |
| interruptible_sleep_on(&s->midi.iwait); |
| if (signal_pending(current)) |
| return ret ? ret : -ERESTARTSYS; |
| continue; |
| } |
| if (copy_to_user(buffer, s->midi.ibuf + ptr, cnt)) |
| return ret ? ret : -EFAULT; |
| ptr = (ptr + cnt) % MIDIINBUF; |
| spin_lock_irqsave(&s->lock, flags); |
| s->midi.ird = ptr; |
| s->midi.icnt -= cnt; |
| spin_unlock_irqrestore(&s->lock, flags); |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| } |
| return ret; |
| } |
| |
| |
| static ssize_t cs4281_midi_write(struct file *file, const char __user *buffer, |
| size_t count, loff_t * ppos) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| ssize_t ret; |
| unsigned long flags; |
| unsigned ptr; |
| int cnt; |
| |
| VALIDATE_STATE(s); |
| if (!access_ok(VERIFY_READ, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| while (count > 0) { |
| spin_lock_irqsave(&s->lock, flags); |
| ptr = s->midi.owr; |
| cnt = MIDIOUTBUF - ptr; |
| if (s->midi.ocnt + cnt > MIDIOUTBUF) |
| cnt = MIDIOUTBUF - s->midi.ocnt; |
| if (cnt <= 0) |
| cs4281_handle_midi(s); |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (cnt > count) |
| cnt = count; |
| if (cnt <= 0) { |
| if (file->f_flags & O_NONBLOCK) |
| return ret ? ret : -EAGAIN; |
| interruptible_sleep_on(&s->midi.owait); |
| if (signal_pending(current)) |
| return ret ? ret : -ERESTARTSYS; |
| continue; |
| } |
| if (copy_from_user(s->midi.obuf + ptr, buffer, cnt)) |
| return ret ? ret : -EFAULT; |
| ptr = (ptr + cnt) % MIDIOUTBUF; |
| spin_lock_irqsave(&s->lock, flags); |
| s->midi.owr = ptr; |
| s->midi.ocnt += cnt; |
| spin_unlock_irqrestore(&s->lock, flags); |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| spin_lock_irqsave(&s->lock, flags); |
| cs4281_handle_midi(s); |
| spin_unlock_irqrestore(&s->lock, flags); |
| } |
| return ret; |
| } |
| |
| |
| static unsigned int cs4281_midi_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| unsigned long flags; |
| unsigned int mask = 0; |
| |
| VALIDATE_STATE(s); |
| if (file->f_flags & FMODE_WRITE) |
| poll_wait(file, &s->midi.owait, wait); |
| if (file->f_flags & FMODE_READ) |
| poll_wait(file, &s->midi.iwait, wait); |
| spin_lock_irqsave(&s->lock, flags); |
| if (file->f_flags & FMODE_READ) { |
| if (s->midi.icnt > 0) |
| mask |= POLLIN | POLLRDNORM; |
| } |
| if (file->f_flags & FMODE_WRITE) { |
| if (s->midi.ocnt < MIDIOUTBUF) |
| mask |= POLLOUT | POLLWRNORM; |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| return mask; |
| } |
| |
| |
| static int cs4281_midi_open(struct inode *inode, struct file *file) |
| { |
| unsigned long flags, temp1; |
| unsigned int minor = iminor(inode); |
| struct cs4281_state *s=NULL; |
| struct list_head *entry; |
| list_for_each(entry, &cs4281_devs) |
| { |
| s = list_entry(entry, struct cs4281_state, list); |
| |
| if (s->dev_midi == minor) |
| break; |
| } |
| |
| if (entry == &cs4281_devs) |
| return -ENODEV; |
| if (!s) |
| { |
| CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO |
| "cs4281: cs4281_open(): Error - unable to find audio state struct\n")); |
| return -ENODEV; |
| } |
| VALIDATE_STATE(s); |
| file->private_data = s; |
| // wait for device to become free |
| mutex_lock(&s->open_sem); |
| while (s->open_mode & (file->f_mode << FMODE_MIDI_SHIFT)) { |
| if (file->f_flags & O_NONBLOCK) { |
| mutex_unlock(&s->open_sem); |
| return -EBUSY; |
| } |
| mutex_unlock(&s->open_sem); |
| interruptible_sleep_on(&s->open_wait); |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| mutex_lock(&s->open_sem); |
| } |
| spin_lock_irqsave(&s->lock, flags); |
| if (!(s->open_mode & (FMODE_MIDI_READ | FMODE_MIDI_WRITE))) { |
| s->midi.ird = s->midi.iwr = s->midi.icnt = 0; |
| s->midi.ord = s->midi.owr = s->midi.ocnt = 0; |
| writel(1, s->pBA0 + BA0_MIDCR); // Reset the interface. |
| writel(0, s->pBA0 + BA0_MIDCR); // Return to normal mode. |
| s->midi.ird = s->midi.iwr = s->midi.icnt = 0; |
| writel(0x0000000f, s->pBA0 + BA0_MIDCR); // Enable transmit, record, ints. |
| temp1 = readl(s->pBA0 + BA0_HIMR); |
| writel(temp1 & 0xffbfffff, s->pBA0 + BA0_HIMR); // Enable midi int. recognition. |
| writel(HICR_IEV | HICR_CHGM, s->pBA0 + BA0_HICR); // Enable interrupts |
| init_timer(&s->midi.timer); |
| s->midi.timer.expires = jiffies + 1; |
| s->midi.timer.data = (unsigned long) s; |
| s->midi.timer.function = cs4281_midi_timer; |
| add_timer(&s->midi.timer); |
| } |
| if (file->f_mode & FMODE_READ) { |
| s->midi.ird = s->midi.iwr = s->midi.icnt = 0; |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| s->midi.ord = s->midi.owr = s->midi.ocnt = 0; |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| s->open_mode |= |
| (file-> |
| f_mode << FMODE_MIDI_SHIFT) & (FMODE_MIDI_READ | |
| FMODE_MIDI_WRITE); |
| mutex_unlock(&s->open_sem); |
| return nonseekable_open(inode, file); |
| } |
| |
| |
| static int cs4281_midi_release(struct inode *inode, struct file *file) |
| { |
| struct cs4281_state *s = |
| (struct cs4281_state *) file->private_data; |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long flags; |
| unsigned count, tmo; |
| |
| VALIDATE_STATE(s); |
| |
| if (file->f_mode & FMODE_WRITE) { |
| add_wait_queue(&s->midi.owait, &wait); |
| for (;;) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| spin_lock_irqsave(&s->lock, flags); |
| count = s->midi.ocnt; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (count <= 0) |
| break; |
| if (signal_pending(current)) |
| break; |
| if (file->f_flags & O_NONBLOCK) { |
| remove_wait_queue(&s->midi.owait, &wait); |
| current->state = TASK_RUNNING; |
| return -EBUSY; |
| } |
| tmo = (count * HZ) / 3100; |
| if (!schedule_timeout(tmo ? : 1) && tmo) |
| printk(KERN_DEBUG |
| "cs4281: midi timed out??\n"); |
| } |
| remove_wait_queue(&s->midi.owait, &wait); |
| current->state = TASK_RUNNING; |
| } |
| mutex_lock(&s->open_sem); |
| s->open_mode &= |
| (~(file->f_mode << FMODE_MIDI_SHIFT)) & (FMODE_MIDI_READ | |
| FMODE_MIDI_WRITE); |
| spin_lock_irqsave(&s->lock, flags); |
| if (!(s->open_mode & (FMODE_MIDI_READ | FMODE_MIDI_WRITE))) { |
| writel(0, s->pBA0 + BA0_MIDCR); // Disable Midi interrupts. |
| del_timer(&s->midi.timer); |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| mutex_unlock(&s->open_sem); |
| wake_up(&s->open_wait); |
| return 0; |
| } |
| |
| // ****************************************************************************************** |
| // Midi file operations struct. |
| // ****************************************************************************************** |
| static /*const */ struct file_operations cs4281_midi_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = cs4281_midi_read, |
| .write = cs4281_midi_write, |
| .poll = cs4281_midi_poll, |
| .open = cs4281_midi_open, |
| .release = cs4281_midi_release, |
| }; |
| |
| |
| // --------------------------------------------------------------------- |
| |
| // maximum number of devices |
| #define NR_DEVICE 8 // Only eight devices supported currently. |
| |
| // --------------------------------------------------------------------- |
| |
| static struct initvol { |
| int mixch; |
| int vol; |
| } initvol[] __devinitdata = { |
| |
| { |
| SOUND_MIXER_WRITE_VOLUME, 0x4040}, { |
| SOUND_MIXER_WRITE_PCM, 0x4040}, { |
| SOUND_MIXER_WRITE_SYNTH, 0x4040}, { |
| SOUND_MIXER_WRITE_CD, 0x4040}, { |
| SOUND_MIXER_WRITE_LINE, 0x4040}, { |
| SOUND_MIXER_WRITE_LINE1, 0x4040}, { |
| SOUND_MIXER_WRITE_RECLEV, 0x0000}, { |
| SOUND_MIXER_WRITE_SPEAKER, 0x4040}, { |
| SOUND_MIXER_WRITE_MIC, 0x0000} |
| }; |
| |
| |
| #ifndef NOT_CS4281_PM |
| static void __devinit cs4281_BuildFIFO( |
| struct cs4281_pipeline *p, |
| struct cs4281_state *s) |
| { |
| switch(p->number) |
| { |
| case 0: /* playback */ |
| { |
| p->u32FCRnAddress = BA0_FCR0; |
| p->u32FSICnAddress = BA0_FSIC0; |
| p->u32FPDRnAddress = BA0_FPDR0; |
| break; |
| } |
| case 1: /* capture */ |
| { |
| p->u32FCRnAddress = BA0_FCR1; |
| p->u32FSICnAddress = BA0_FSIC1; |
| p->u32FPDRnAddress = BA0_FPDR1; |
| break; |
| } |
| |
| case 2: |
| { |
| p->u32FCRnAddress = BA0_FCR2; |
| p->u32FSICnAddress = BA0_FSIC2; |
| p->u32FPDRnAddress = BA0_FPDR2; |
| break; |
| } |
| case 3: |
| { |
| p->u32FCRnAddress = BA0_FCR3; |
| p->u32FSICnAddress = BA0_FSIC3; |
| p->u32FPDRnAddress = BA0_FPDR3; |
| break; |
| } |
| default: |
| break; |
| } |
| // |
| // first read the hardware to initialize the member variables |
| // |
| p->u32FCRnValue = readl(s->pBA0 + p->u32FCRnAddress); |
| p->u32FSICnValue = readl(s->pBA0 + p->u32FSICnAddress); |
| p->u32FPDRnValue = readl(s->pBA0 + p->u32FPDRnAddress); |
| |
| } |
| |
| static void __devinit cs4281_BuildDMAengine( |
| struct cs4281_pipeline *p, |
| struct cs4281_state *s) |
| { |
| /* |
| * initialize all the addresses of this pipeline dma info. |
| */ |
| switch(p->number) |
| { |
| case 0: /* playback */ |
| { |
| p->u32DBAnAddress = BA0_DBA0; |
| p->u32DCAnAddress = BA0_DCA0; |
| p->u32DBCnAddress = BA0_DBC0; |
| p->u32DCCnAddress = BA0_DCC0; |
| p->u32DMRnAddress = BA0_DMR0; |
| p->u32DCRnAddress = BA0_DCR0; |
| p->u32HDSRnAddress = BA0_HDSR0; |
| break; |
| } |
| |
| case 1: /* capture */ |
| { |
| p->u32DBAnAddress = BA0_DBA1; |
| p->u32DCAnAddress = BA0_DCA1; |
| p->u32DBCnAddress = BA0_DBC1; |
| p->u32DCCnAddress = BA0_DCC1; |
| p->u32DMRnAddress = BA0_DMR1; |
| p->u32DCRnAddress = BA0_DCR1; |
| p->u32HDSRnAddress = BA0_HDSR1; |
| break; |
| } |
| |
| case 2: |
| { |
| p->u32DBAnAddress = BA0_DBA2; |
| p->u32DCAnAddress = BA0_DCA2; |
| p->u32DBCnAddress = BA0_DBC2; |
| p->u32DCCnAddress = BA0_DCC2; |
| p->u32DMRnAddress = BA0_DMR2; |
| p->u32DCRnAddress = BA0_DCR2; |
| p->u32HDSRnAddress = BA0_HDSR2; |
| break; |
| } |
| |
| case 3: |
| { |
| p->u32DBAnAddress = BA0_DBA3; |
| p->u32DCAnAddress = BA0_DCA3; |
| p->u32DBCnAddress = BA0_DBC3; |
| p->u32DCCnAddress = BA0_DCC3; |
| p->u32DMRnAddress = BA0_DMR3; |
| p->u32DCRnAddress = BA0_DCR3; |
| p->u32HDSRnAddress = BA0_HDSR3; |
| break; |
| } |
| default: |
| break; |
| } |
| |
| // |
| // Initialize the dma values for this pipeline |
| // |
| p->u32DBAnValue = readl(s->pBA0 + p->u32DBAnAddress); |
| p->u32DBCnValue = readl(s->pBA0 + p->u32DBCnAddress); |
| p->u32DMRnValue = readl(s->pBA0 + p->u32DMRnAddress); |
| p->u32DCRnValue = readl(s->pBA0 + p->u32DCRnAddress); |
| |
| } |
| |
| static void __devinit cs4281_InitPM(struct cs4281_state *s) |
| { |
| int i; |
| struct cs4281_pipeline *p; |
| |
| for(i=0;i<CS4281_NUMBER_OF_PIPELINES;i++) |
| { |
| p = &s->pl[i]; |
| p->number = i; |
| cs4281_BuildDMAengine(p,s); |
| cs4281_BuildFIFO(p,s); |
| /* |
| * currently only 2 pipelines are used |
| * so, only set the valid bit on the playback and capture. |
| */ |
| if( (i == CS4281_PLAYBACK_PIPELINE_NUMBER) || |
| (i == CS4281_CAPTURE_PIPELINE_NUMBER)) |
| p->flags |= CS4281_PIPELINE_VALID; |
| } |
| s->pm.u32SSPM_BITS = 0x7e; /* rev c, use 0x7c for rev a or b */ |
| } |
| #endif |
| |
| static int __devinit cs4281_probe(struct pci_dev *pcidev, |
| const struct pci_device_id *pciid) |
| { |
| struct cs4281_state *s; |
| dma_addr_t dma_mask; |
| mm_segment_t fs; |
| int i, val; |
| unsigned int temp1, temp2; |
| |
| CS_DBGOUT(CS_FUNCTION | CS_INIT, 2, |
| printk(KERN_INFO "cs4281: probe()+\n")); |
| |
| if (pci_enable_device(pcidev)) { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: pci_enable_device() failed\n")); |
| return -1; |
| } |
| if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM) || |
| !(pci_resource_flags(pcidev, 1) & IORESOURCE_MEM)) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe()- Memory region not assigned\n")); |
| return -ENODEV; |
| } |
| if (pcidev->irq == 0) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe() IRQ not assigned\n")); |
| return -ENODEV; |
| } |
| dma_mask = 0xffffffff; /* this enables playback and recording */ |
| i = pci_set_dma_mask(pcidev, dma_mask); |
| if (i) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe() architecture does not support 32bit PCI busmaster DMA\n")); |
| return i; |
| } |
| if (!(s = kmalloc(sizeof(struct cs4281_state), GFP_KERNEL))) { |
| CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe() no memory for state struct.\n")); |
| return -1; |
| } |
| memset(s, 0, sizeof(struct cs4281_state)); |
| init_waitqueue_head(&s->dma_adc.wait); |
| init_waitqueue_head(&s->dma_dac.wait); |
| init_waitqueue_head(&s->open_wait); |
| init_waitqueue_head(&s->open_wait_adc); |
| init_waitqueue_head(&s->open_wait_dac); |
| init_waitqueue_head(&s->midi.iwait); |
| init_waitqueue_head(&s->midi.owait); |
| mutex_init(&s->open_sem); |
| mutex_init(&s->open_sem_adc); |
| mutex_init(&s->open_sem_dac); |
| spin_lock_init(&s->lock); |
| s->pBA0phys = pci_resource_start(pcidev, 0); |
| s->pBA1phys = pci_resource_start(pcidev, 1); |
| |
| /* Convert phys to linear. */ |
| s->pBA0 = ioremap_nocache(s->pBA0phys, 4096); |
| if (!s->pBA0) { |
| CS_DBGOUT(CS_ERROR | CS_INIT, 1, printk(KERN_ERR |
| "cs4281: BA0 I/O mapping failed. Skipping part.\n")); |
| goto err_free; |
| } |
| s->pBA1 = ioremap_nocache(s->pBA1phys, 65536); |
| if (!s->pBA1) { |
| CS_DBGOUT(CS_ERROR | CS_INIT, 1, printk(KERN_ERR |
| "cs4281: BA1 I/O mapping failed. Skipping part.\n")); |
| goto err_unmap; |
| } |
| |
| temp1 = readl(s->pBA0 + BA0_PCICFG00); |
| temp2 = readl(s->pBA0 + BA0_PCICFG04); |
| |
| CS_DBGOUT(CS_INIT, 2, |
| printk(KERN_INFO |
| "cs4281: probe() BA0=0x%.8x BA1=0x%.8x pBA0=%p pBA1=%p \n", |
| (unsigned) temp1, (unsigned) temp2, s->pBA0, s->pBA1)); |
| CS_DBGOUT(CS_INIT, 2, |
| printk(KERN_INFO |
| "cs4281: probe() pBA0phys=0x%.8x pBA1phys=0x%.8x\n", |
| (unsigned) s->pBA0phys, (unsigned) s->pBA1phys)); |
| |
| #ifndef NOT_CS4281_PM |
| s->pm.flags = CS4281_PM_IDLE; |
| #endif |
| temp1 = cs4281_hw_init(s); |
| if (temp1) { |
| CS_DBGOUT(CS_ERROR | CS_INIT, 1, printk(KERN_ERR |
| "cs4281: cs4281_hw_init() failed. Skipping part.\n")); |
| goto err_irq; |
| } |
| s->magic = CS4281_MAGIC; |
| s->pcidev = pcidev; |
| s->irq = pcidev->irq; |
| if (request_irq |
| (s->irq, cs4281_interrupt, SA_SHIRQ, "Crystal CS4281", s)) { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, |
| printk(KERN_ERR "cs4281: irq %u in use\n", s->irq)); |
| goto err_irq; |
| } |
| if ((s->dev_audio = register_sound_dsp(&cs4281_audio_fops, -1)) < |
| 0) { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe() register_sound_dsp() failed.\n")); |
| goto err_dev1; |
| } |
| if ((s->dev_mixer = register_sound_mixer(&cs4281_mixer_fops, -1)) < |
| 0) { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe() register_sound_mixer() failed.\n")); |
| goto err_dev2; |
| } |
| if ((s->dev_midi = register_sound_midi(&cs4281_midi_fops, -1)) < 0) { |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR |
| "cs4281: probe() register_sound_midi() failed.\n")); |
| goto err_dev3; |
| } |
| #ifndef NOT_CS4281_PM |
| cs4281_InitPM(s); |
| s->pm.flags |= CS4281_PM_NOT_REGISTERED; |
| #endif |
| |
| pci_set_master(pcidev); // enable bus mastering |
| |
| fs = get_fs(); |
| set_fs(KERNEL_DS); |
| val = SOUND_MASK_LINE; |
| mixer_ioctl(s, SOUND_MIXER_WRITE_RECSRC, (unsigned long) &val); |
| for (i = 0; i < sizeof(initvol) / sizeof(initvol[0]); i++) { |
| val = initvol[i].vol; |
| mixer_ioctl(s, initvol[i].mixch, (unsigned long) &val); |
| } |
| val = 1; // enable mic preamp |
| mixer_ioctl(s, SOUND_MIXER_PRIVATE1, (unsigned long) &val); |
| set_fs(fs); |
| |
| pci_set_drvdata(pcidev, s); |
| list_add(&s->list, &cs4281_devs); |
| CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO |
| "cs4281: probe()- device allocated successfully\n")); |
| return 0; |
| |
| err_dev3: |
| unregister_sound_mixer(s->dev_mixer); |
| err_dev2: |
| unregister_sound_dsp(s->dev_audio); |
| err_dev1: |
| free_irq(s->irq, s); |
| err_irq: |
| iounmap(s->pBA1); |
| err_unmap: |
| iounmap(s->pBA0); |
| err_free: |
| kfree(s); |
| |
| CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_INFO |
| "cs4281: probe()- no device allocated\n")); |
| return -ENODEV; |
| } // probe_cs4281 |
| |
| |
| // --------------------------------------------------------------------- |
| |
| static void __devexit cs4281_remove(struct pci_dev *pci_dev) |
| { |
| struct cs4281_state *s = pci_get_drvdata(pci_dev); |
| // stop DMA controller |
| synchronize_irq(s->irq); |
| free_irq(s->irq, s); |
| unregister_sound_dsp(s->dev_audio); |
| unregister_sound_mixer(s->dev_mixer); |
| unregister_sound_midi(s->dev_midi); |
| iounmap(s->pBA1); |
| iounmap(s->pBA0); |
| pci_set_drvdata(pci_dev,NULL); |
| list_del(&s->list); |
| kfree(s); |
| CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO |
| "cs4281: cs4281_remove()-: remove successful\n")); |
| } |
| |
| static struct pci_device_id cs4281_pci_tbl[] = { |
| { |
| .vendor = PCI_VENDOR_ID_CIRRUS, |
| .device = PCI_DEVICE_ID_CRYSTAL_CS4281, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, |
| { 0, }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, cs4281_pci_tbl); |
| |
| static struct pci_driver cs4281_pci_driver = { |
| .name = "cs4281", |
| .id_table = cs4281_pci_tbl, |
| .probe = cs4281_probe, |
| .remove = __devexit_p(cs4281_remove), |
| .suspend = CS4281_SUSPEND_TBL, |
| .resume = CS4281_RESUME_TBL, |
| }; |
| |
| static int __init cs4281_init_module(void) |
| { |
| int rtn = 0; |
| CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO |
| "cs4281: cs4281_init_module()+ \n")); |
| printk(KERN_INFO "cs4281: version v%d.%02d.%d time " __TIME__ " " |
| __DATE__ "\n", CS4281_MAJOR_VERSION, CS4281_MINOR_VERSION, |
| CS4281_ARCH); |
| rtn = pci_register_driver(&cs4281_pci_driver); |
| |
| CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: cs4281_init_module()- (%d)\n",rtn)); |
| return rtn; |
| } |
| |
| static void __exit cs4281_cleanup_module(void) |
| { |
| pci_unregister_driver(&cs4281_pci_driver); |
| CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, |
| printk(KERN_INFO "cs4281: cleanup_cs4281() finished\n")); |
| } |
| // --------------------------------------------------------------------- |
| |
| MODULE_AUTHOR("gw boynton, audio@crystal.cirrus.com"); |
| MODULE_DESCRIPTION("Cirrus Logic CS4281 Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| // --------------------------------------------------------------------- |
| |
| module_init(cs4281_init_module); |
| module_exit(cs4281_cleanup_module); |
| |