include/asm-xtensa/xtensa/xt2000.h - kernel/msm-4.9 - Gitiles

 #ifndef _INC_XT2000_H_
 #define _INC_XT2000_H_

 /*
  * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
  *
  * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the
  * Tensilica XT2000 Emulation Board
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 2002 Tensilica Inc.
  */


 #include <xtensa/config/core.h>
 #include <xtensa/config/system.h>


 /*
  *  Default assignment of XT2000 devices to external interrupts.
  */

 /*  Ethernet interrupt:  */
 #ifdef XCHAL_EXTINT3_NUM
 #define SONIC83934_INTNUM	XCHAL_EXTINT3_NUM
 #define SONIC83934_INTLEVEL	XCHAL_EXTINT3_LEVEL
 #define SONIC83934_INTMASK	XCHAL_EXTINT3_MASK
 #else
 #define SONIC83934_INTMASK	0
 #endif

 /*  DUART channel 1 interrupt (P1 - console):  */
 #ifdef XCHAL_EXTINT4_NUM
 #define DUART16552_1_INTNUM	XCHAL_EXTINT4_NUM
 #define DUART16552_1_INTLEVEL	XCHAL_EXTINT4_LEVEL
 #define DUART16552_1_INTMASK	XCHAL_EXTINT4_MASK
 #else
 #define DUART16552_1_INTMASK	0
 #endif

 /*  DUART channel 2 interrupt (P2 - 2nd serial port):  */
 #ifdef XCHAL_EXTINT5_NUM
 #define DUART16552_2_INTNUM	XCHAL_EXTINT5_NUM
 #define DUART16552_2_INTLEVEL	XCHAL_EXTINT5_LEVEL
 #define DUART16552_2_INTMASK	XCHAL_EXTINT5_MASK
 #else
 #define DUART16552_2_INTMASK	0
 #endif

 /*  FPGA-combined PCI/etc interrupts:  */
 #ifdef XCHAL_EXTINT6_NUM
 #define XT2000_FPGAPCI_INTNUM	XCHAL_EXTINT6_NUM
 #define XT2000_FPGAPCI_INTLEVEL	XCHAL_EXTINT6_LEVEL
 #define XT2000_FPGAPCI_INTMASK	XCHAL_EXTINT6_MASK
 #else
 #define XT2000_FPGAPCI_INTMASK	0
 #endif


 /*
  *  Device addresses.
  *
  *  Note:  for endianness-independence, use 32-bit loads and stores for all
  *  register accesses to Ethernet, DUART and LED devices.  Undefined bits
  *  may need to be masked out if needed when reading if the actual register
  *  size is smaller than 32 bits.
  *
  *  Note:  XT2000 bus byte lanes are defined in terms of msbyte and lsbyte
  *  relative to the processor.  So 32-bit registers are accessed consistently
  *  from both big and little endian processors.  However, this means byte
  *  sequences are not consistent between big and little endian processors.
  *  This is fine for RAM, and for ROM if ROM is created for a specific
  *  processor (and thus has correct byte sequences).  However this may be
  *  unexpected for Flash, which might contain a file-system that one wants
  *  to use for multiple processor configurations (eg. the Flash might contain
  *  the Ethernet card's address, endianness-independent application data, etc).
  *  That is, byte sequences written in Flash by a core of a given endianness
  *  will be byte-swapped when seen by a core of the other endianness.
  *  Someone implementing an endianness-independent Flash file system will
  *  likely handle this byte-swapping issue in the Flash driver software.
  */

 #define DUART16552_XTAL_FREQ	18432000	/* crystal frequency in Hz */
 #define XTBOARD_FLASH_MAXSIZE	0x4000000	/* 64 MB (max; depends on what is socketed!) */
 #define XTBOARD_EPROM_MAXSIZE	0x0400000	/* 4 MB (max; depends on what is socketed!) */
 #define XTBOARD_EEPROM_MAXSIZE	0x0080000	/* 512 kB (max; depends on what is socketed!) */
 #define XTBOARD_ASRAM_SIZE	0x0100000	/* 1 MB */
 #define XTBOARD_PCI_MEM_SIZE	0x8000000	/* 128 MB (allocated) */
 #define XTBOARD_PCI_IO_SIZE	0x1000000	/* 16 MB (allocated) */

 #ifdef XSHAL_IOBLOCK_BYPASS_PADDR
 /*  PCI memory space:  */
 # define XTBOARD_PCI_MEM_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000)
 /*  Socketed Flash (eg. 2 x 16-bit devices):  */
 # define XTBOARD_FLASH_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000)
 /*  PCI I/O space:  */
 # define XTBOARD_PCI_IO_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000)
 /*  V3 PCI interface chip register/config space:  */
 # define XTBOARD_V3PCI_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000)
 /*  Bus Interface registers:  */
 # define XTBOARD_BUSINT_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000)
 /*  FPGA registers:  */
 # define XT2000_FPGAREGS_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000)
 /*  SONIC SN83934 Ethernet controller/transceiver:  */
 # define SONIC83934_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000)
 /*  8-character bitmapped LED display:  */
 # define XTBOARD_LED_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000)
 /*  National-Semi PC16552D DUART:  */
 # define DUART16552_1_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020)	/* channel 1 (P1 - console) */
 # define DUART16552_2_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000)	/* channel 2 (P2) */
 /*  Asynchronous Static RAM:  */
 # define XTBOARD_ASRAM_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000)
 /*  8-bit EEPROM:  */
 # define XTBOARD_EEPROM_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000)
 /*  2 x 16-bit EPROMs:  */
 # define XTBOARD_EPROM_PADDR	(XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000)
 #endif /* XSHAL_IOBLOCK_BYPASS_PADDR */

 /*  These devices might be accessed cached:  */
 #ifdef XSHAL_IOBLOCK_CACHED_PADDR
 # define XTBOARD_PCI_MEM_CACHED_PADDR	(XSHAL_IOBLOCK_CACHED_PADDR+0x0000000)
 # define XTBOARD_FLASH_CACHED_PADDR	(XSHAL_IOBLOCK_CACHED_PADDR+0x8000000)
 # define XTBOARD_ASRAM_CACHED_PADDR	(XSHAL_IOBLOCK_CACHED_PADDR+0xD400000)
 # define XTBOARD_EEPROM_CACHED_PADDR	(XSHAL_IOBLOCK_CACHED_PADDR+0xD600000)
 # define XTBOARD_EPROM_CACHED_PADDR	(XSHAL_IOBLOCK_CACHED_PADDR+0xD800000)
 #endif /* XSHAL_IOBLOCK_CACHED_PADDR */


 /***  Same thing over again, this time with virtual addresses:  ***/

 #ifdef XSHAL_IOBLOCK_BYPASS_VADDR
 /*  PCI memory space:  */
 # define XTBOARD_PCI_MEM_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000)
 /*  Socketed Flash (eg. 2 x 16-bit devices):  */
 # define XTBOARD_FLASH_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000)
 /*  PCI I/O space:  */
 # define XTBOARD_PCI_IO_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000)
 /*  V3 PCI interface chip register/config space:  */
 # define XTBOARD_V3PCI_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000)
 /*  Bus Interface registers:  */
 # define XTBOARD_BUSINT_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000)
 /*  FPGA registers:  */
 # define XT2000_FPGAREGS_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000)
 /*  SONIC SN83934 Ethernet controller/transceiver:  */
 # define SONIC83934_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000)
 /*  8-character bitmapped LED display:  */
 # define XTBOARD_LED_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000)
 /*  National-Semi PC16552D DUART:  */
 # define DUART16552_1_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020)	/* channel 1 (P1 - console) */
 # define DUART16552_2_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000)	/* channel 2 (P2) */
 /*  Asynchronous Static RAM:  */
 # define XTBOARD_ASRAM_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000)
 /*  8-bit EEPROM:  */
 # define XTBOARD_EEPROM_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000)
 /*  2 x 16-bit EPROMs:  */
 # define XTBOARD_EPROM_VADDR	(XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000)
 #endif /* XSHAL_IOBLOCK_BYPASS_VADDR */

 /*  These devices might be accessed cached:  */
 #ifdef XSHAL_IOBLOCK_CACHED_VADDR
 # define XTBOARD_PCI_MEM_CACHED_VADDR	(XSHAL_IOBLOCK_CACHED_VADDR+0x0000000)
 # define XTBOARD_FLASH_CACHED_VADDR	(XSHAL_IOBLOCK_CACHED_VADDR+0x8000000)
 # define XTBOARD_ASRAM_CACHED_VADDR	(XSHAL_IOBLOCK_CACHED_VADDR+0xD400000)
 # define XTBOARD_EEPROM_CACHED_VADDR	(XSHAL_IOBLOCK_CACHED_VADDR+0xD600000)
 # define XTBOARD_EPROM_CACHED_VADDR	(XSHAL_IOBLOCK_CACHED_VADDR+0xD800000)
 #endif /* XSHAL_IOBLOCK_CACHED_VADDR */


 /*  System ROM:  */
 #define XTBOARD_ROM_SIZE		XSHAL_ROM_SIZE
 #ifdef XSHAL_ROM_VADDR
 #define XTBOARD_ROM_VADDR		XSHAL_ROM_VADDR
 #endif
 #ifdef XSHAL_ROM_PADDR
 #define XTBOARD_ROM_PADDR		XSHAL_ROM_PADDR
 #endif

 /*  System RAM:  */
 #define XTBOARD_RAM_SIZE		XSHAL_RAM_SIZE
 #ifdef XSHAL_RAM_VADDR
 #define XTBOARD_RAM_VADDR		XSHAL_RAM_VADDR
 #endif
 #ifdef XSHAL_RAM_PADDR
 #define XTBOARD_RAM_PADDR		XSHAL_RAM_PADDR
 #endif
 #define XTBOARD_RAM_BYPASS_VADDR	XSHAL_RAM_BYPASS_VADDR
 #define XTBOARD_RAM_BYPASS_PADDR	XSHAL_RAM_BYPASS_PADDR


 /*
  *  Things that depend on device addresses.
  */


 #define XTBOARD_CACHEATTR_WRITEBACK	XSHAL_XT2000_CACHEATTR_WRITEBACK
 #define XTBOARD_CACHEATTR_WRITEALLOC	XSHAL_XT2000_CACHEATTR_WRITEALLOC
 #define XTBOARD_CACHEATTR_WRITETHRU	XSHAL_XT2000_CACHEATTR_WRITETHRU
 #define XTBOARD_CACHEATTR_BYPASS	XSHAL_XT2000_CACHEATTR_BYPASS
 #define XTBOARD_CACHEATTR_DEFAULT	XSHAL_XT2000_CACHEATTR_DEFAULT

 #define XTBOARD_BUSINT_PIPE_REGIONS	XSHAL_XT2000_PIPE_REGIONS
 #define XTBOARD_BUSINT_SDRAM_REGIONS	XSHAL_XT2000_SDRAM_REGIONS


 /*
  *  BusLogic (FPGA) registers.
  *  All these registers are normally accessed using 32-bit loads/stores.
  */

 /*  Register offsets:  */
 #define XT2000_DATECD_OFS	0x00	/* date code (read-only) */
 #define XT2000_STSREG_OFS	0x04	/* status (read-only) */
 #define XT2000_SYSLED_OFS	0x08	/* system LED */
 #define XT2000_WRPROT_OFS	0x0C	/* write protect */
 #define XT2000_SWRST_OFS	0x10	/* software reset */
 #define XT2000_SYSRST_OFS	0x14	/* system (peripherals) reset */
 #define XT2000_IMASK_OFS	0x18	/* interrupt mask */
 #define XT2000_ISTAT_OFS	0x1C	/* interrupt status */
 #define XT2000_V3CFG_OFS	0x20	/* V3 config (V320 PCI) */

 /*  Physical register addresses:  */
 #ifdef XT2000_FPGAREGS_PADDR
 #define XT2000_DATECD_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS)
 #define XT2000_STSREG_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS)
 #define XT2000_SYSLED_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS)
 #define XT2000_WRPROT_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS)
 #define XT2000_SWRST_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS)
 #define XT2000_SYSRST_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS)
 #define XT2000_IMASK_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS)
 #define XT2000_ISTAT_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS)
 #define XT2000_V3CFG_PADDR	(XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS)
 #endif

 /*  Virtual register addresses:  */
 #ifdef XT2000_FPGAREGS_VADDR
 #define XT2000_DATECD_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS)
 #define XT2000_STSREG_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS)
 #define XT2000_SYSLED_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS)
 #define XT2000_WRPROT_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS)
 #define XT2000_SWRST_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS)
 #define XT2000_SYSRST_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS)
 #define XT2000_IMASK_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS)
 #define XT2000_ISTAT_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS)
 #define XT2000_V3CFG_VADDR	(XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS)
 /*  Register access (for C code):  */
 #define XT2000_DATECD_REG	(*(volatile unsigned*) XT2000_DATECD_VADDR)
 #define XT2000_STSREG_REG	(*(volatile unsigned*) XT2000_STSREG_VADDR)
 #define XT2000_SYSLED_REG	(*(volatile unsigned*) XT2000_SYSLED_VADDR)
 #define XT2000_WRPROT_REG	(*(volatile unsigned*) XT2000_WRPROT_VADDR)
 #define XT2000_SWRST_REG	(*(volatile unsigned*) XT2000_SWRST_VADDR)
 #define XT2000_SYSRST_REG	(*(volatile unsigned*) XT2000_SYSRST_VADDR)
 #define XT2000_IMASK_REG	(*(volatile unsigned*) XT2000_IMASK_VADDR)
 #define XT2000_ISTAT_REG	(*(volatile unsigned*) XT2000_ISTAT_VADDR)
 #define XT2000_V3CFG_REG	(*(volatile unsigned*) XT2000_V3CFG_VADDR)
 #endif

 /*  DATECD (date code) bit fields:  */

 /*  BCD-coded month (01..12):  */
 #define XT2000_DATECD_MONTH_SHIFT	24
 #define XT2000_DATECD_MONTH_BITS	8
 #define XT2000_DATECD_MONTH_MASK	0xFF000000
 /*  BCD-coded day (01..31):  */
 #define XT2000_DATECD_DAY_SHIFT		16
 #define XT2000_DATECD_DAY_BITS		8
 #define XT2000_DATECD_DAY_MASK		0x00FF0000
 /*  BCD-coded year (2001..9999):  */
 #define XT2000_DATECD_YEAR_SHIFT	0
 #define XT2000_DATECD_YEAR_BITS		16
 #define XT2000_DATECD_YEAR_MASK		0x0000FFFF

 /*  STSREG (status) bit fields:  */

 /*  Switch SW3 setting bit fields (0=off/up, 1=on/down):  */
 #define XT2000_STSREG_SW3_SHIFT		0
 #define XT2000_STSREG_SW3_BITS		4
 #define XT2000_STSREG_SW3_MASK		0x0000000F
 /*  Boot-select bits of switch SW3:  */
 #define XT2000_STSREG_BOOTSEL_SHIFT	0
 #define XT2000_STSREG_BOOTSEL_BITS	2
 #define XT2000_STSREG_BOOTSEL_MASK	0x00000003
 /*  Boot-select values:  */
 #define XT2000_STSREG_BOOTSEL_FLASH	0
 #define XT2000_STSREG_BOOTSEL_EPROM16	1
 #define XT2000_STSREG_BOOTSEL_PROM8	2
 #define XT2000_STSREG_BOOTSEL_ASRAM	3
 /*  User-defined bits of switch SW3:  */
 #define XT2000_STSREG_SW3_2_SHIFT	2
 #define XT2000_STSREG_SW3_2_MASK	0x00000004
 #define XT2000_STSREG_SW3_3_SHIFT	3
 #define XT2000_STSREG_SW3_3_MASK	0x00000008

 /*  SYSLED (system LED) bit fields:  */

 /*  LED control bit (0=off, 1=on):  */
 #define XT2000_SYSLED_LEDON_SHIFT	0
 #define XT2000_SYSLED_LEDON_MASK	0x00000001

 /*  WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]):  */

 /*  Flash write protect:  */
 #define XT2000_WRPROT_FLWP_SHIFT	0
 #define XT2000_WRPROT_FLWP_MASK		0x00000001
 /*  Reserved but present write protect bits:  */
 #define XT2000_WRPROT_WRP_SHIFT		1
 #define XT2000_WRPROT_WRP_BITS		7
 #define XT2000_WRPROT_WRP_MASK		0x000000FE

 /*  SWRST (software reset; allows s/w to generate power-on equivalent reset):  */

 /*  Software reset bits:  */
 #define XT2000_SWRST_SWR_SHIFT		0
 #define XT2000_SWRST_SWR_BITS		16
 #define XT2000_SWRST_SWR_MASK		0x0000FFFF
 /*  Software reset value -- writing this value resets the board:  */
 #define XT2000_SWRST_RESETVALUE		0x0000DEAD

 /*  SYSRST (system reset; controls reset of individual peripherals):  */

 /*  All-device reset:  */
 #define XT2000_SYSRST_ALL_SHIFT		0
 #define XT2000_SYSRST_ALL_BITS		4
 #define XT2000_SYSRST_ALL_MASK		0x0000000F
 /*  HDSP-2534 LED display reset (1=reset, 0=nothing):  */
 #define XT2000_SYSRST_LED_SHIFT		0
 #define XT2000_SYSRST_LED_MASK		0x00000001
 /*  Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing):  */
 #define XT2000_SYSRST_SONIC_SHIFT	1
 #define XT2000_SYSRST_SONIC_MASK	0x00000002
 /*  DP16552 DUART reset (1=reset, 0=nothing):  */
 #define XT2000_SYSRST_DUART_SHIFT	2
 #define XT2000_SYSRST_DUART_MASK	0x00000004
 /*  V3 V320 PCI bridge controller reset (1=reset, 0=nothing):  */
 #define XT2000_SYSRST_V3_SHIFT		3
 #define XT2000_SYSRST_V3_MASK		0x00000008

 /*  IMASK (interrupt mask; 0=disable, 1=enable):  */
 /*  ISTAT (interrupt status; 0=inactive, 1=pending):  */

 /*  PCI INTP interrupt:  */
 #define XT2000_INTMUX_PCI_INTP_SHIFT	2
 #define XT2000_INTMUX_PCI_INTP_MASK	0x00000004
 /*  PCI INTS interrupt:  */
 #define XT2000_INTMUX_PCI_INTS_SHIFT	3
 #define XT2000_INTMUX_PCI_INTS_MASK	0x00000008
 /*  PCI INTD interrupt:  */
 #define XT2000_INTMUX_PCI_INTD_SHIFT	4
 #define XT2000_INTMUX_PCI_INTD_MASK	0x00000010
 /*  V320 PCI controller interrupt:  */
 #define XT2000_INTMUX_V3_SHIFT		5
 #define XT2000_INTMUX_V3_MASK		0x00000020
 /*  PCI ENUM interrupt:  */
 #define XT2000_INTMUX_PCI_ENUM_SHIFT	6
 #define XT2000_INTMUX_PCI_ENUM_MASK	0x00000040
 /*  PCI DEG interrupt:  */
 #define XT2000_INTMUX_PCI_DEG_SHIFT	7
 #define XT2000_INTMUX_PCI_DEG_MASK	0x00000080

 /*  V3CFG (V3 config, V320 PCI controller):  */

 /*  V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]):  */
 #define XT2000_V3CFG_V3ADC_SHIFT	0
 #define XT2000_V3CFG_V3ADC_MASK		0x00000001

 /* I2C Devices */

 #define	XT2000_I2C_RTC_ID		0x68
 #define	XT2000_I2C_NVRAM0_ID		0x56	/* 1st 256 byte block */
 #define	XT2000_I2C_NVRAM1_ID		0x57	/* 2nd 256 byte block */

 /*  NVRAM Board Info structure:  */

 #define XT2000_NVRAM_SIZE		512

 #define XT2000_NVRAM_BINFO_START	0x100
 #define XT2000_NVRAM_BINFO_SIZE		0x20
 #define XT2000_NVRAM_BINFO_VERSION	0x10	/* version 1.0 */
 #if 0
 #define XT2000_NVRAM_BINFO_VERSION_OFFSET	0x00
 #define XT2000_NVRAM_BINFO_VERSION_SIZE			0x1
 #define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET	0x02
 #define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE		0x6
 #define XT2000_NVRAM_BINFO_SN_OFFSET		0x10
 #define XT2000_NVRAM_BINFO_SN_SIZE			0xE
 #define	XT2000_NVRAM_BINFO_CRC_OFFSET		0x1E
 #define	XT2000_NVRAM_BINFO_CRC_SIZE			0x2
 #endif /*0*/

 #if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE)
 typedef struct xt2000_nvram_binfo {
     unsigned char	version;
     unsigned char	reserved1;
     unsigned char	eth_addr[6];
     unsigned char	reserved8[8];
     unsigned char	serialno[14];
     unsigned char	crc[2];		/* 16-bit CRC */
 } xt2000_nvram_binfo;
 #endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/


 #endif /*_INC_XT2000_H_*/
	#ifndef _INC_XT2000_H_
	#define _INC_XT2000_H_

	/*
	* THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
	*
	* include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the
	* Tensilica XT2000 Emulation Board
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (C) 2002 Tensilica Inc.
	*/


	#include <xtensa/config/core.h>
	#include <xtensa/config/system.h>


	/*
	* Default assignment of XT2000 devices to external interrupts.
	*/

	/* Ethernet interrupt: */
	#ifdef XCHAL_EXTINT3_NUM
	#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM
	#define SONIC83934_INTLEVEL XCHAL_EXTINT3_LEVEL
	#define SONIC83934_INTMASK XCHAL_EXTINT3_MASK
	#else
	#define SONIC83934_INTMASK 0
	#endif

	/* DUART channel 1 interrupt (P1 - console): */
	#ifdef XCHAL_EXTINT4_NUM
	#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM
	#define DUART16552_1_INTLEVEL XCHAL_EXTINT4_LEVEL
	#define DUART16552_1_INTMASK XCHAL_EXTINT4_MASK
	#else
	#define DUART16552_1_INTMASK 0
	#endif

	/* DUART channel 2 interrupt (P2 - 2nd serial port): */
	#ifdef XCHAL_EXTINT5_NUM
	#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM
	#define DUART16552_2_INTLEVEL XCHAL_EXTINT5_LEVEL
	#define DUART16552_2_INTMASK XCHAL_EXTINT5_MASK
	#else
	#define DUART16552_2_INTMASK 0
	#endif

	/* FPGA-combined PCI/etc interrupts: */
	#ifdef XCHAL_EXTINT6_NUM
	#define XT2000_FPGAPCI_INTNUM XCHAL_EXTINT6_NUM
	#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL
	#define XT2000_FPGAPCI_INTMASK XCHAL_EXTINT6_MASK
	#else
	#define XT2000_FPGAPCI_INTMASK 0
	#endif



	/*
	* Device addresses.
	*
	* Note: for endianness-independence, use 32-bit loads and stores for all
	* register accesses to Ethernet, DUART and LED devices. Undefined bits
	* may need to be masked out if needed when reading if the actual register
	* size is smaller than 32 bits.
	*
	* Note: XT2000 bus byte lanes are defined in terms of msbyte and lsbyte
	* relative to the processor. So 32-bit registers are accessed consistently
	* from both big and little endian processors. However, this means byte
	* sequences are not consistent between big and little endian processors.
	* This is fine for RAM, and for ROM if ROM is created for a specific
	* processor (and thus has correct byte sequences). However this may be
	* unexpected for Flash, which might contain a file-system that one wants
	* to use for multiple processor configurations (eg. the Flash might contain
	* the Ethernet card's address, endianness-independent application data, etc).
	* That is, byte sequences written in Flash by a core of a given endianness
	* will be byte-swapped when seen by a core of the other endianness.
	* Someone implementing an endianness-independent Flash file system will
	* likely handle this byte-swapping issue in the Flash driver software.
	*/

	#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */
	#define XTBOARD_FLASH_MAXSIZE 0x4000000 /* 64 MB (max; depends on what is socketed!) */
	#define XTBOARD_EPROM_MAXSIZE 0x0400000 /* 4 MB (max; depends on what is socketed!) */
	#define XTBOARD_EEPROM_MAXSIZE 0x0080000 /* 512 kB (max; depends on what is socketed!) */
	#define XTBOARD_ASRAM_SIZE 0x0100000 /* 1 MB */
	#define XTBOARD_PCI_MEM_SIZE 0x8000000 /* 128 MB (allocated) */
	#define XTBOARD_PCI_IO_SIZE 0x1000000 /* 16 MB (allocated) */

	#ifdef XSHAL_IOBLOCK_BYPASS_PADDR
	/* PCI memory space: */
	# define XTBOARD_PCI_MEM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000)
	/* Socketed Flash (eg. 2 x 16-bit devices): */
	# define XTBOARD_FLASH_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000)
	/* PCI I/O space: */
	# define XTBOARD_PCI_IO_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000)
	/* V3 PCI interface chip register/config space: */
	# define XTBOARD_V3PCI_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000)
	/* Bus Interface registers: */
	# define XTBOARD_BUSINT_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000)
	/* FPGA registers: */
	# define XT2000_FPGAREGS_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000)
	/* SONIC SN83934 Ethernet controller/transceiver: */
	# define SONIC83934_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000)
	/* 8-character bitmapped LED display: */
	# define XTBOARD_LED_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000)
	/* National-Semi PC16552D DUART: */
	# define DUART16552_1_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020) /* channel 1 (P1 - console) */
	# define DUART16552_2_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000) /* channel 2 (P2) */
	/* Asynchronous Static RAM: */
	# define XTBOARD_ASRAM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000)
	/* 8-bit EEPROM: */
	# define XTBOARD_EEPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000)
	/* 2 x 16-bit EPROMs: */
	# define XTBOARD_EPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000)
	#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */

	/* These devices might be accessed cached: */
	#ifdef XSHAL_IOBLOCK_CACHED_PADDR
	# define XTBOARD_PCI_MEM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000)
	# define XTBOARD_FLASH_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000)
	# define XTBOARD_ASRAM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000)
	# define XTBOARD_EEPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000)
	# define XTBOARD_EPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000)
	#endif /* XSHAL_IOBLOCK_CACHED_PADDR */


	/* Same thing over again, this time with virtual addresses: */

	#ifdef XSHAL_IOBLOCK_BYPASS_VADDR
	/* PCI memory space: */
	# define XTBOARD_PCI_MEM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000)
	/* Socketed Flash (eg. 2 x 16-bit devices): */
	# define XTBOARD_FLASH_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000)
	/* PCI I/O space: */
	# define XTBOARD_PCI_IO_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000)
	/* V3 PCI interface chip register/config space: */
	# define XTBOARD_V3PCI_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000)
	/* Bus Interface registers: */
	# define XTBOARD_BUSINT_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000)
	/* FPGA registers: */
	# define XT2000_FPGAREGS_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000)
	/* SONIC SN83934 Ethernet controller/transceiver: */
	# define SONIC83934_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000)
	/* 8-character bitmapped LED display: */
	# define XTBOARD_LED_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000)
	/* National-Semi PC16552D DUART: */
	# define DUART16552_1_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020) /* channel 1 (P1 - console) */
	# define DUART16552_2_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000) /* channel 2 (P2) */
	/* Asynchronous Static RAM: */
	# define XTBOARD_ASRAM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000)
	/* 8-bit EEPROM: */
	# define XTBOARD_EEPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000)
	/* 2 x 16-bit EPROMs: */
	# define XTBOARD_EPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000)
	#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */

	/* These devices might be accessed cached: */
	#ifdef XSHAL_IOBLOCK_CACHED_VADDR
	# define XTBOARD_PCI_MEM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000)
	# define XTBOARD_FLASH_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000)
	# define XTBOARD_ASRAM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000)
	# define XTBOARD_EEPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000)
	# define XTBOARD_EPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000)
	#endif /* XSHAL_IOBLOCK_CACHED_VADDR */


	/* System ROM: */
	#define XTBOARD_ROM_SIZE XSHAL_ROM_SIZE
	#ifdef XSHAL_ROM_VADDR
	#define XTBOARD_ROM_VADDR XSHAL_ROM_VADDR
	#endif
	#ifdef XSHAL_ROM_PADDR
	#define XTBOARD_ROM_PADDR XSHAL_ROM_PADDR
	#endif

	/* System RAM: */
	#define XTBOARD_RAM_SIZE XSHAL_RAM_SIZE
	#ifdef XSHAL_RAM_VADDR
	#define XTBOARD_RAM_VADDR XSHAL_RAM_VADDR
	#endif
	#ifdef XSHAL_RAM_PADDR
	#define XTBOARD_RAM_PADDR XSHAL_RAM_PADDR
	#endif
	#define XTBOARD_RAM_BYPASS_VADDR XSHAL_RAM_BYPASS_VADDR
	#define XTBOARD_RAM_BYPASS_PADDR XSHAL_RAM_BYPASS_PADDR



	/*
	* Things that depend on device addresses.
	*/


	#define XTBOARD_CACHEATTR_WRITEBACK XSHAL_XT2000_CACHEATTR_WRITEBACK
	#define XTBOARD_CACHEATTR_WRITEALLOC XSHAL_XT2000_CACHEATTR_WRITEALLOC
	#define XTBOARD_CACHEATTR_WRITETHRU XSHAL_XT2000_CACHEATTR_WRITETHRU
	#define XTBOARD_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS
	#define XTBOARD_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT

	#define XTBOARD_BUSINT_PIPE_REGIONS XSHAL_XT2000_PIPE_REGIONS
	#define XTBOARD_BUSINT_SDRAM_REGIONS XSHAL_XT2000_SDRAM_REGIONS



	/*
	* BusLogic (FPGA) registers.
	* All these registers are normally accessed using 32-bit loads/stores.
	*/

	/* Register offsets: */
	#define XT2000_DATECD_OFS 0x00 /* date code (read-only) */
	#define XT2000_STSREG_OFS 0x04 /* status (read-only) */
	#define XT2000_SYSLED_OFS 0x08 /* system LED */
	#define XT2000_WRPROT_OFS 0x0C /* write protect */
	#define XT2000_SWRST_OFS 0x10 /* software reset */
	#define XT2000_SYSRST_OFS 0x14 /* system (peripherals) reset */
	#define XT2000_IMASK_OFS 0x18 /* interrupt mask */
	#define XT2000_ISTAT_OFS 0x1C /* interrupt status */
	#define XT2000_V3CFG_OFS 0x20 /* V3 config (V320 PCI) */

	/* Physical register addresses: */
	#ifdef XT2000_FPGAREGS_PADDR
	#define XT2000_DATECD_PADDR (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS)
	#define XT2000_STSREG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS)
	#define XT2000_SYSLED_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS)
	#define XT2000_WRPROT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS)
	#define XT2000_SWRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS)
	#define XT2000_SYSRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS)
	#define XT2000_IMASK_PADDR (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS)
	#define XT2000_ISTAT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS)
	#define XT2000_V3CFG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS)
	#endif

	/* Virtual register addresses: */
	#ifdef XT2000_FPGAREGS_VADDR
	#define XT2000_DATECD_VADDR (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS)
	#define XT2000_STSREG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS)
	#define XT2000_SYSLED_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS)
	#define XT2000_WRPROT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS)
	#define XT2000_SWRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS)
	#define XT2000_SYSRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS)
	#define XT2000_IMASK_VADDR (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS)
	#define XT2000_ISTAT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS)
	#define XT2000_V3CFG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS)
	/* Register access (for C code): */
	#define XT2000_DATECD_REG ((volatile unsigned) XT2000_DATECD_VADDR)
	#define XT2000_STSREG_REG ((volatile unsigned) XT2000_STSREG_VADDR)
	#define XT2000_SYSLED_REG ((volatile unsigned) XT2000_SYSLED_VADDR)
	#define XT2000_WRPROT_REG ((volatile unsigned) XT2000_WRPROT_VADDR)
	#define XT2000_SWRST_REG ((volatile unsigned) XT2000_SWRST_VADDR)
	#define XT2000_SYSRST_REG ((volatile unsigned) XT2000_SYSRST_VADDR)
	#define XT2000_IMASK_REG ((volatile unsigned) XT2000_IMASK_VADDR)
	#define XT2000_ISTAT_REG ((volatile unsigned) XT2000_ISTAT_VADDR)
	#define XT2000_V3CFG_REG ((volatile unsigned) XT2000_V3CFG_VADDR)
	#endif

	/* DATECD (date code) bit fields: */

	/* BCD-coded month (01..12): */
	#define XT2000_DATECD_MONTH_SHIFT 24
	#define XT2000_DATECD_MONTH_BITS 8
	#define XT2000_DATECD_MONTH_MASK 0xFF000000
	/* BCD-coded day (01..31): */
	#define XT2000_DATECD_DAY_SHIFT 16
	#define XT2000_DATECD_DAY_BITS 8
	#define XT2000_DATECD_DAY_MASK 0x00FF0000
	/* BCD-coded year (2001..9999): */
	#define XT2000_DATECD_YEAR_SHIFT 0
	#define XT2000_DATECD_YEAR_BITS 16
	#define XT2000_DATECD_YEAR_MASK 0x0000FFFF

	/* STSREG (status) bit fields: */

	/* Switch SW3 setting bit fields (0=off/up, 1=on/down): */
	#define XT2000_STSREG_SW3_SHIFT 0
	#define XT2000_STSREG_SW3_BITS 4
	#define XT2000_STSREG_SW3_MASK 0x0000000F
	/* Boot-select bits of switch SW3: */
	#define XT2000_STSREG_BOOTSEL_SHIFT 0
	#define XT2000_STSREG_BOOTSEL_BITS 2
	#define XT2000_STSREG_BOOTSEL_MASK 0x00000003
	/* Boot-select values: */
	#define XT2000_STSREG_BOOTSEL_FLASH 0
	#define XT2000_STSREG_BOOTSEL_EPROM16 1
	#define XT2000_STSREG_BOOTSEL_PROM8 2
	#define XT2000_STSREG_BOOTSEL_ASRAM 3
	/* User-defined bits of switch SW3: */
	#define XT2000_STSREG_SW3_2_SHIFT 2
	#define XT2000_STSREG_SW3_2_MASK 0x00000004
	#define XT2000_STSREG_SW3_3_SHIFT 3
	#define XT2000_STSREG_SW3_3_MASK 0x00000008

	/* SYSLED (system LED) bit fields: */

	/* LED control bit (0=off, 1=on): */
	#define XT2000_SYSLED_LEDON_SHIFT 0
	#define XT2000_SYSLED_LEDON_MASK 0x00000001

	/* WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]): */

	/* Flash write protect: */
	#define XT2000_WRPROT_FLWP_SHIFT 0
	#define XT2000_WRPROT_FLWP_MASK 0x00000001
	/* Reserved but present write protect bits: */
	#define XT2000_WRPROT_WRP_SHIFT 1
	#define XT2000_WRPROT_WRP_BITS 7
	#define XT2000_WRPROT_WRP_MASK 0x000000FE

	/* SWRST (software reset; allows s/w to generate power-on equivalent reset): */

	/* Software reset bits: */
	#define XT2000_SWRST_SWR_SHIFT 0
	#define XT2000_SWRST_SWR_BITS 16
	#define XT2000_SWRST_SWR_MASK 0x0000FFFF
	/* Software reset value -- writing this value resets the board: */
	#define XT2000_SWRST_RESETVALUE 0x0000DEAD

	/* SYSRST (system reset; controls reset of individual peripherals): */

	/* All-device reset: */
	#define XT2000_SYSRST_ALL_SHIFT 0
	#define XT2000_SYSRST_ALL_BITS 4
	#define XT2000_SYSRST_ALL_MASK 0x0000000F
	/* HDSP-2534 LED display reset (1=reset, 0=nothing): */
	#define XT2000_SYSRST_LED_SHIFT 0
	#define XT2000_SYSRST_LED_MASK 0x00000001
	/* Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing): */
	#define XT2000_SYSRST_SONIC_SHIFT 1
	#define XT2000_SYSRST_SONIC_MASK 0x00000002
	/* DP16552 DUART reset (1=reset, 0=nothing): */
	#define XT2000_SYSRST_DUART_SHIFT 2
	#define XT2000_SYSRST_DUART_MASK 0x00000004
	/* V3 V320 PCI bridge controller reset (1=reset, 0=nothing): */
	#define XT2000_SYSRST_V3_SHIFT 3
	#define XT2000_SYSRST_V3_MASK 0x00000008

	/* IMASK (interrupt mask; 0=disable, 1=enable): */
	/* ISTAT (interrupt status; 0=inactive, 1=pending): */

	/* PCI INTP interrupt: */
	#define XT2000_INTMUX_PCI_INTP_SHIFT 2
	#define XT2000_INTMUX_PCI_INTP_MASK 0x00000004
	/* PCI INTS interrupt: */
	#define XT2000_INTMUX_PCI_INTS_SHIFT 3
	#define XT2000_INTMUX_PCI_INTS_MASK 0x00000008
	/* PCI INTD interrupt: */
	#define XT2000_INTMUX_PCI_INTD_SHIFT 4
	#define XT2000_INTMUX_PCI_INTD_MASK 0x00000010
	/* V320 PCI controller interrupt: */
	#define XT2000_INTMUX_V3_SHIFT 5
	#define XT2000_INTMUX_V3_MASK 0x00000020
	/* PCI ENUM interrupt: */
	#define XT2000_INTMUX_PCI_ENUM_SHIFT 6
	#define XT2000_INTMUX_PCI_ENUM_MASK 0x00000040
	/* PCI DEG interrupt: */
	#define XT2000_INTMUX_PCI_DEG_SHIFT 7
	#define XT2000_INTMUX_PCI_DEG_MASK 0x00000080

	/* V3CFG (V3 config, V320 PCI controller): */

	/* V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]): */
	#define XT2000_V3CFG_V3ADC_SHIFT 0
	#define XT2000_V3CFG_V3ADC_MASK 0x00000001

	/* I2C Devices */

	#define XT2000_I2C_RTC_ID 0x68
	#define XT2000_I2C_NVRAM0_ID 0x56 /* 1st 256 byte block */
	#define XT2000_I2C_NVRAM1_ID 0x57 /* 2nd 256 byte block */

	/* NVRAM Board Info structure: */

	#define XT2000_NVRAM_SIZE 512

	#define XT2000_NVRAM_BINFO_START 0x100
	#define XT2000_NVRAM_BINFO_SIZE 0x20
	#define XT2000_NVRAM_BINFO_VERSION 0x10 /* version 1.0 */
	#if 0
	#define XT2000_NVRAM_BINFO_VERSION_OFFSET 0x00
	#define XT2000_NVRAM_BINFO_VERSION_SIZE 0x1
	#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET 0x02
	#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE 0x6
	#define XT2000_NVRAM_BINFO_SN_OFFSET 0x10
	#define XT2000_NVRAM_BINFO_SN_SIZE 0xE
	#define XT2000_NVRAM_BINFO_CRC_OFFSET 0x1E
	#define XT2000_NVRAM_BINFO_CRC_SIZE 0x2
	#endif /0/

	#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE)
	typedef struct xt2000_nvram_binfo {
	unsigned char version;
	unsigned char reserved1;
	unsigned char eth_addr[6];
	unsigned char reserved8[8];
	unsigned char serialno[14];
	unsigned char crc[2]; /* 16-bit CRC */
	} xt2000_nvram_binfo;
	#endif /!__ASSEMBLY__ && !_NOCLANGUAGE/


	#endif /_INC_XT2000_H_/