| /* Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &soc { |
| |
| pil_gpu: qcom,kgsl-hyp { |
| compatible = "qcom,pil-tz-generic"; |
| qcom,pas-id = <13>; |
| qcom,firmware-name = "a630_zap"; |
| }; |
| |
| msm_bus: qcom,kgsl-busmon{ |
| label = "kgsl-busmon"; |
| compatible = "qcom,kgsl-busmon"; |
| }; |
| |
| gpubw: qcom,gpubw { |
| compatible = "qcom,devbw"; |
| governor = "bw_vbif"; |
| qcom,src-dst-ports = <26 512>; |
| /* |
| * active-only flag is used while registering the bus |
| * governor.It helps release the bus vote when the CPU |
| * subsystem is inactiv3 |
| */ |
| qcom,active-only; |
| qcom,bw-tbl = |
| < 0 /* off */ >, |
| < 762 /* 100 MHz */ >, |
| < 1144 /* 150 MHz */ >, |
| < 1525 /* 200 MHz */ >, |
| < 2288 /* 300 MHz */ >, |
| < 3143 /* 412 MHz */ >, |
| < 4173 /* 547 MHz */ >, |
| < 5195 /* 681 MHz */ >, |
| < 5859 /* 768 MHz */ >, |
| < 7759 /* 1017 MHz */ >, |
| < 9887 /* 1296 MHz */ >, |
| < 11863 /* 1555 MHz */ >, |
| < 13763 /* 1804 MHz */ >; |
| }; |
| |
| msm_gpu: qcom,kgsl-3d0@5000000 { |
| label = "kgsl-3d0"; |
| compatible = "qcom,kgsl-3d0", "qcom,kgsl-3d"; |
| status = "ok"; |
| reg = <0x5000000 0x40000>; |
| reg-names = "kgsl_3d0_reg_memory"; |
| interrupts = <0 300 0>; |
| interrupt-names = "kgsl_3d0_irq"; |
| qcom,id = <0>; |
| |
| qcom,chipid = <0x06030000>; |
| |
| qcom,initial-pwrlevel = <2>; |
| |
| qcom,gpu-quirk-hfi-use-reg; |
| |
| qcom,idle-timeout = <100000000>; //msecs |
| qcom,no-nap; |
| |
| qcom,highest-bank-bit = <15>; |
| |
| qcom,min-access-length = <32>; |
| |
| qcom,ubwc-mode = <2>; |
| |
| qcom,snapshot-size = <1048576>; //bytes |
| |
| qcom,gpu-qdss-stm = <0x161c0000 0x40000>; // base addr, size |
| |
| qcom,tsens-name = "tsens_tz_sensor12"; |
| #cooling-cells = <2>; |
| |
| clocks = <&clock_gfx GPU_CC_GX_GFX3D_CLK>, |
| <&clock_gpucc GPU_CC_CXO_CLK>, |
| <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, |
| <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&clock_gpucc GPU_CC_CX_GMU_CLK>, |
| <&clock_gpucc GPU_CC_AHB_CLK>, |
| <&clock_gpucc GPU_CC_GX_CXO_CLK>; |
| |
| clock-names = "core_clk", "rbbmtimer_clk", "mem_clk", |
| "mem_iface_clk", "gmu_clk", "ahb_clk", |
| "cxo_clk"; |
| |
| qcom,isense-clk-on-level = <1>; |
| |
| /* Bus Scale Settings */ |
| qcom,gpubw-dev = <&gpubw>; |
| qcom,bus-control; |
| qcom,msm-bus,name = "grp3d"; |
| qcom,msm-bus,num-cases = <13>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <26 512 0 0>, |
| |
| <26 512 0 800000>, // 1 bus=100 |
| <26 512 0 1200000>, // 2 bus=150 |
| <26 512 0 1600000>, // 3 bus=200 |
| <26 512 0 2400000>, // 4 bus=300 |
| <26 512 0 3296000>, // 5 bus=412 |
| <26 512 0 4376000>, // 6 bus=547 |
| <26 512 0 5448000>, // 7 bus=681 |
| <26 512 0 6144000>, // 8 bus=768 |
| <26 512 0 8136000>, // 9 bus=1017 |
| <26 512 0 10368000>, // 10 bus=1296 |
| <26 512 0 12440000>, // 11 bus=1555 |
| <26 512 0 14432000>; // 12 bus=1804 |
| |
| /* GDSC regulator names */ |
| regulator-names = "vddcx", "vdd"; |
| /* GDSC oxili regulators */ |
| vddcx-supply = <&gpu_cx_gdsc>; |
| vdd-supply = <&gpu_gx_gdsc>; |
| |
| /* GPU related llc slices */ |
| cache-slice-names = "gpu", "gpuhtw"; |
| cache-slices = <&llcc 12>, <&llcc 11>; |
| |
| /* GPU Mempools */ |
| qcom,gpu-mempools { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "qcom,gpu-mempools"; |
| |
| /* 4K Page Pool configuration */ |
| qcom,gpu-mempool@0 { |
| reg = <0>; |
| qcom,mempool-page-size = <4096>; |
| qcom,mempool-reserved = <2048>; |
| qcom,mempool-allocate; |
| }; |
| /* 8K Page Pool configuration */ |
| qcom,gpu-mempool@1 { |
| reg = <1>; |
| qcom,mempool-page-size = <8192>; |
| qcom,mempool-reserved = <1024>; |
| qcom,mempool-allocate; |
| }; |
| /* 64K Page Pool configuration */ |
| qcom,gpu-mempool@2 { |
| reg = <2>; |
| qcom,mempool-page-size = <65536>; |
| qcom,mempool-reserved = <256>; |
| }; |
| /* 1M Page Pool configuration */ |
| qcom,gpu-mempool@3 { |
| reg = <3>; |
| qcom,mempool-page-size = <1048576>; |
| qcom,mempool-reserved = <32>; |
| }; |
| }; |
| |
| /* Power levels */ |
| qcom,gpu-pwrlevels { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compatible = "qcom,gpu-pwrlevels"; |
| |
| qcom,gpu-pwrlevel@0 { |
| reg = <0>; |
| qcom,gpu-freq = <280000000>; |
| qcom,bus-freq = <4>; |
| qcom,bus-min = <3>; |
| qcom,bus-max = <5>; |
| }; |
| |
| |
| qcom,gpu-pwrlevel@1 { |
| reg = <1>; |
| qcom,gpu-freq = <280000000>; |
| qcom,bus-freq = <4>; |
| qcom,bus-min = <3>; |
| qcom,bus-max = <5>; |
| }; |
| |
| qcom,gpu-pwrlevel@2 { |
| reg = <2>; |
| qcom,gpu-freq = <280000000>; |
| qcom,bus-freq = <4>; |
| qcom,bus-min = <3>; |
| qcom,bus-max = <5>; |
| }; |
| |
| qcom,gpu-pwrlevel@3 { |
| reg = <3>; |
| qcom,gpu-freq = <280000000>; |
| qcom,bus-freq = <4>; |
| qcom,bus-min = <3>; |
| qcom,bus-max = <5>; |
| }; |
| }; |
| |
| }; |
| |
| kgsl_msm_iommu: qcom,kgsl-iommu { |
| compatible = "qcom,kgsl-smmu-v2"; |
| |
| reg = <0x05040000 0x10000>; |
| qcom,protect = <0x40000 0x10000>; |
| qcom,micro-mmu-control = <0x6000>; |
| |
| clocks =<&clock_gcc GCC_GPU_CFG_AHB_CLK>, |
| <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, |
| <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>; |
| |
| clock-names = "iface_clk", "mem_clk", "mem_iface_clk"; |
| |
| qcom,secure_align_mask = <0xfff>; |
| qcom,global_pt; |
| |
| gfx3d_user: gfx3d_user { |
| compatible = "qcom,smmu-kgsl-cb"; |
| label = "gfx3d_user"; |
| iommus = <&kgsl_smmu 0>; |
| qcom,gpu-offset = <0x48000>; |
| }; |
| |
| gfx3d_secure: gfx3d_secure { |
| compatible = "qcom,smmu-kgsl-cb"; |
| iommus = <&kgsl_smmu 2>; |
| }; |
| }; |
| |
| gmu: qcom,gmu { |
| label = "kgsl-gmu"; |
| compatible = "qcom,gpu-gmu"; |
| |
| reg = <0x506a000 0x26000>, <0xb200000 0x300000>; |
| reg-names = "kgsl_gmu_reg", "kgsl_gmu_pdc_reg"; |
| |
| interrupts = <0 304 0>, <0 305 0>; |
| interrupt-names = "kgsl_hfi_irq", "kgsl_gmu_irq"; |
| |
| qcom,msm-bus,name = "cnoc"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <26 10036 0 0>, // CNOC off |
| <26 10036 0 100>; // CNOC on |
| |
| regulator-names = "vddcx", "vdd"; |
| vddcx-supply = <&gpu_cx_gdsc>; |
| vdd-supply = <&gpu_gx_gdsc>; |
| |
| |
| clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>, |
| <&clock_gpucc GPU_CC_CXO_CLK>, |
| <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, |
| <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&clock_gpucc GPU_CC_AHB_CLK>; |
| |
| clock-names = "gmu_clk", "cxo_clk", "axi_clk", |
| "memnoc_clk", "ahb_clk"; |
| |
| qcom,gmu-pwrlevels { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compatible = "qcom,gmu-pwrlevels"; |
| |
| qcom,gmu-pwrlevel@0 { |
| reg = <0>; |
| qcom,gmu-freq = <400000000>; |
| }; |
| |
| qcom,gmu-pwrlevel@1 { |
| reg = <1>; |
| qcom,gmu-freq = <19200000>; |
| }; |
| |
| qcom,gmu-pwrlevel@2 { |
| reg = <2>; |
| qcom,gmu-freq = <0>; |
| }; |
| }; |
| |
| gmu_user: gmu_user { |
| compatible = "qcom,smmu-gmu-user-cb"; |
| iommus = <&kgsl_smmu 4>; |
| }; |
| |
| gmu_kernel: gmu_kernel { |
| compatible = "qcom,smmu-gmu-kernel-cb"; |
| iommus = <&kgsl_smmu 5>; |
| }; |
| }; |
| }; |